ARM: zynq: Add Z-turn board V5
Adding Z-turn board V5 to resolve the change between:
"Z-TURNBOARD_schematic.pdf" schematics state version 1 to 4 has Atheros AR8035
"Z-Turn_Board_sch_V15_20160303.pdf" schematics state version 5 has Micrel KSZ9031
At this time the S25FL128SAGNFI003 doesn't work because of bug:
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
zynq-zturn was checked on V5 board, same error.
Maybe Z-turn board have the same problem (board with W25Q128BVFIG).
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b195723..687a92f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -279,6 +279,7 @@
zynq-zc770-xm013.dtb \
zynq-zed.dtb \
zynq-zturn.dtb \
+ zynq-zturn-v5.dtb \
zynq-zybo.dtb \
zynq-zybo-z7.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += \
diff --git a/arch/arm/dts/zynq-zturn-common.dtsi b/arch/arm/dts/zynq-zturn-common.dtsi
new file mode 100644
index 0000000..1d7af02
--- /dev/null
+++ b/arch/arm/dts/zynq-zturn-common.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
+ * Copyright (C) 2017 Alexander Graf <agraf@suse.de>
+ *
+ * Based on zynq-zed.dts which is:
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ *
+ */
+
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ compatible = "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ serial1 = &uart0;
+ mmc0 = &sdhci0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ usr-led1 {
+ label = "usr-led1";
+ gpios = <&gpio0 0x0 0x1>;
+ default-state = "off";
+ };
+
+ usr-led2 {
+ label = "usr-led2";
+ gpios = <&gpio0 0x9 0x1>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ K1 {
+ label = "K1";
+ gpios = <&gpio0 0x32 0x1>;
+ linux,code = <0x66>;
+ wakeup-source;
+ autorepeat;
+ };
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&qspi {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ };
+};
+
+&sdhci0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&uart1 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&can0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ stlm75@49 {
+ status = "okay";
+ compatible = "lm75";
+ reg = <0x49>;
+ };
+
+ accelerometer@53 {
+ compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";
+ reg = <0x53>;
+ interrupt-parent = <&intc>;
+ interrupts = <0x0 0x1e 0x4>;
+ };
+};
diff --git a/arch/arm/dts/zynq-zturn-v5.dts b/arch/arm/dts/zynq-zturn-v5.dts
new file mode 100644
index 0000000..536632a
--- /dev/null
+++ b/arch/arm/dts/zynq-zturn-v5.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+/include/ "zynq-zturn-common.dtsi"
+
+/ {
+ model = "Zynq Z-Turn MYIR Board V5";
+ compatible = "myir,zynq-zturn-v5", "xlnx,zynq-7000";
+};
+
+&gem0 {
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0x3>;
+ };
+};
diff --git a/arch/arm/dts/zynq-zturn.dts b/arch/arm/dts/zynq-zturn.dts
index 600e8ee..620b24a 100644
--- a/arch/arm/dts/zynq-zturn.dts
+++ b/arch/arm/dts/zynq-zturn.dts
@@ -1,122 +1,15 @@
// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
- * Copyright (C) 2017 Alexander Graf <agraf@suse.de>
- *
- * Based on zynq-zed.dts which is:
- * Copyright (C) 2011 - 2014 Xilinx
- * Copyright (C) 2012 National Instruments Corp.
- *
- */
/dts-v1/;
-/include/ "zynq-7000.dtsi"
+/include/ "zynq-zturn-common.dtsi"
/ {
model = "Zynq Z-Turn MYIR Board";
compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
-
- aliases {
- ethernet0 = &gem0;
- serial0 = &uart1;
- serial1 = &uart0;
- mmc0 = &sdhci0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x40000000>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- usr-led1 {
- label = "usr-led1";
- gpios = <&gpio0 0x0 0x1>;
- default-state = "off";
- };
-
- usr-led2 {
- label = "usr-led2";
- gpios = <&gpio0 0x9 0x1>;
- default-state = "off";
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- K1 {
- label = "K1";
- gpios = <&gpio0 0x32 0x1>;
- linux,code = <0x66>;
- wakeup-source;
- autorepeat;
- };
- };
};
-&clkc {
- ps-clk-frequency = <33333333>;
-};
-
-&qspi {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
&gem0 {
- status = "okay";
- phy-mode = "rgmii-id";
- phy-handle = <ðernet_phy>;
-
ethernet_phy: ethernet-phy@0 {
reg = <0x0>;
};
};
-
-&sdhci0 {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
-&uart0 {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
-&uart1 {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&can0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <400000>;
-
- stlm75@49 {
- status = "okay";
- compatible = "lm75";
- reg = <0x49>;
- };
-
- accelerometer@53 {
- compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";
- reg = <0x53>;
- interrupt-parent = <&intc>;
- interrupts = <0x0 0x1e 0x4>;
- };
-};