diff --git a/arch/arm/mach-uniphier/dram/Makefile b/arch/arm/mach-uniphier/dram/Makefile
index 99e9c86..4e7f122 100644
--- a/arch/arm/mach-uniphier/dram/Makefile
+++ b/arch/arm/mach-uniphier/dram/Makefile
@@ -8,5 +8,7 @@
 					   ddrphy-training.o ddrphy-ph1-pro4.o
 obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8)	+= umc-ph1-sld8.o \
 					   ddrphy-training.o ddrphy-ph1-sld8.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)	+= umc-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B)	+= umc-proxstream2.o
 
 obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o
diff --git a/arch/arm/mach-uniphier/dram/ddrmphy-regs.h b/arch/arm/mach-uniphier/dram/ddrmphy-regs.h
new file mode 100644
index 0000000..569504d
--- /dev/null
+++ b/arch/arm/mach-uniphier/dram/ddrmphy-regs.h
@@ -0,0 +1,146 @@
+/*
+ * UniPhier DDR MultiPHY registers
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef ARCH_DDRMPHY_REGS_H
+#define ARCH_DDRMPHY_REGS_H
+
+#include <linux/bitops.h>
+
+#define DMPHY_SHIFT			2
+
+#define DMPHY_RIDR		(0x000 << DMPHY_SHIFT)
+#define DMPHY_PIR		(0x001 << DMPHY_SHIFT)
+#define   DMPHY_PIR_INIT		BIT(0)	/* Initialization Trigger */
+#define   DMPHY_PIR_ZCAL		BIT(1)	/* Impedance Calibration */
+#define   DMPHY_PIR_PLLINIT		BIT(4)	/* PLL Initialization */
+#define   DMPHY_PIR_DCAL		BIT(5)	/* DDL Calibration */
+#define   DMPHY_PIR_PHYRST		BIT(6)	/* PHY Reset */
+#define   DMPHY_PIR_DRAMRST		BIT(7)	/* DRAM Reset */
+#define   DMPHY_PIR_DRAMINIT		BIT(8)	/* DRAM Initialization */
+#define   DMPHY_PIR_WL			BIT(9)	/* Write Leveling */
+#define   DMPHY_PIR_QSGATE		BIT(10)	/* Read DQS Gate Training */
+#define   DMPHY_PIR_WLADJ		BIT(11)	/* Write Leveling Adjust */
+#define   DMPHY_PIR_RDDSKW		BIT(12)	/* Read Data Bit Deskew */
+#define   DMPHY_PIR_WRDSKW		BIT(13)	/* Write Data Bit Deskew */
+#define   DMPHY_PIR_RDEYE		BIT(14)	/* Read Data Eye Training */
+#define   DMPHY_PIR_WREYE		BIT(15)	/* Write Data Eye Training */
+#define   DMPHY_PIR_ZCALBYP		BIT(30)	/* Impedance Calib Bypass */
+#define   DMPHY_PIR_INITBYP		BIT(31)	/* Initialization Bypass */
+#define DMPHY_PGCR0		(0x002 << DMPHY_SHIFT)
+#define   DMPHY_PGCR0_PHYFRST		BIT(26)	/* PHY FIFO Reset */
+#define DMPHY_PGCR1		(0x003 << DMPHY_SHIFT)
+#define   DMPHY_PGCR1_INHVT		BIT(26)	/* VT Calculation Inhibit */
+#define DMPHY_PGCR2		(0x004 << DMPHY_SHIFT)
+#define   DMPHY_PGCR2_DUALCHN		BIT(28)	/* Dual Channel Configuration*/
+#define   DMPHY_PGCR2_ACPDDC		BIT(29)	/* AC Power-Down with Dual Ch*/
+#define DMPHY_PGCR3		(0x005 << DMPHY_SHIFT)
+#define DMPHY_PGSR0		(0x006 << DMPHY_SHIFT)
+#define   DMPHY_PGSR0_IDONE		BIT(0)	/* Initialization Done */
+#define   DMPHY_PGSR0_PLDONE		BIT(1)	/* PLL Lock Done */
+#define   DMPHY_PGSR0_DCDONE		BIT(2)	/* DDL Calibration Done */
+#define   DMPHY_PGSR0_ZCDONE		BIT(3)	/* Impedance Calibration Done */
+#define   DMPHY_PGSR0_DIDONE		BIT(4)	/* DRAM Initialization Done */
+#define   DMPHY_PGSR0_WLDONE		BIT(5)	/* Write Leveling Done */
+#define   DMPHY_PGSR0_QSGDONE		BIT(6)	/* DQS Gate Training Done */
+#define   DMPHY_PGSR0_WLADONE		BIT(7)	/* Write Leveling Adjust Done */
+#define   DMPHY_PGSR0_RDDONE		BIT(8)	/* Read Bit Deskew Done */
+#define   DMPHY_PGSR0_WDDONE		BIT(9)	/* Write Bit Deskew Done */
+#define   DMPHY_PGSR0_REDONE		BIT(10)	/* Read Eye Training Done */
+#define   DMPHY_PGSR0_WEDONE		BIT(11)	/* Write Eye Training Done */
+#define   DMPHY_PGSR0_ZCERR		BIT(20)	/* Impedance Calib Error */
+#define   DMPHY_PGSR0_WLERR		BIT(21)	/* Write Leveling Error */
+#define   DMPHY_PGSR0_QSGERR		BIT(22)	/* DQS Gate Training Error */
+#define   DMPHY_PGSR0_WLAERR		BIT(23)	/* Write Leveling Adj Error */
+#define   DMPHY_PGSR0_RDERR		BIT(24)	/* Read Bit Deskew Error */
+#define   DMPHY_PGSR0_WDERR		BIT(25)	/* Write Bit Deskew Error */
+#define   DMPHY_PGSR0_REERR		BIT(26)	/* Read Eye Training Error */
+#define   DMPHY_PGSR0_WEERR		BIT(27)	/* Write Eye Training Error */
+#define DMPHY_PGSR1		(0x007 << DMPHY_SHIFT)
+#define   DMPHY_PGSR1_VTSTOP		BIT(30)	/* VT Stop */
+#define DMPHY_PLLCR		(0x008 << DMPHY_SHIFT)
+#define DMPHY_PTR0		(0x009 << DMPHY_SHIFT)
+#define DMPHY_PTR1		(0x00A << DMPHY_SHIFT)
+#define DMPHY_PTR2		(0x00B << DMPHY_SHIFT)
+#define DMPHY_PTR3		(0x00C << DMPHY_SHIFT)
+#define DMPHY_PTR4		(0x00D << DMPHY_SHIFT)
+#define DMPHY_ACMDLR		(0x00E << DMPHY_SHIFT)
+#define DMPHY_ACLCDLR		(0x00F << DMPHY_SHIFT)
+#define DMPHY_ACBDLR0		(0x010 << DMPHY_SHIFT)
+#define DMPHY_ACBDLR1		(0x011 << DMPHY_SHIFT)
+#define DMPHY_ACBDLR2		(0x012 << DMPHY_SHIFT)
+#define DMPHY_ACBDLR3		(0x013 << DMPHY_SHIFT)
+#define DMPHY_ACBDLR4		(0x014 << DMPHY_SHIFT)
+#define DMPHY_ACBDLR5		(0x015 << DMPHY_SHIFT)
+#define DMPHY_ACBDLR6		(0x016 << DMPHY_SHIFT)
+#define DMPHY_ACBDLR7		(0x017 << DMPHY_SHIFT)
+#define DMPHY_ACBDLR8		(0x018 << DMPHY_SHIFT)
+#define DMPHY_ACBDLR9		(0x019 << DMPHY_SHIFT)
+#define DMPHY_ACIOCR0		(0x01A << DMPHY_SHIFT)
+#define DMPHY_ACIOCR1		(0x01B << DMPHY_SHIFT)
+#define DMPHY_ACIOCR2		(0x01C << DMPHY_SHIFT)
+#define DMPHY_ACIOCR3		(0x01D << DMPHY_SHIFT)
+#define DMPHY_ACIOCR4		(0x01E << DMPHY_SHIFT)
+#define DMPHY_ACIOCR5		(0x01F << DMPHY_SHIFT)
+#define DMPHY_DXCCR		(0x020 << DMPHY_SHIFT)
+#define DMPHY_DSGCR		(0x021 << DMPHY_SHIFT)
+#define DMPHY_DCR		(0x022 << DMPHY_SHIFT)
+#define DMPHY_DTPR0		(0x023 << DMPHY_SHIFT)
+#define DMPHY_DTPR1		(0x024 << DMPHY_SHIFT)
+#define DMPHY_DTPR2		(0x025 << DMPHY_SHIFT)
+#define DMPHY_DTPR3		(0x026 << DMPHY_SHIFT)
+#define DMPHY_MR0		(0x027 << DMPHY_SHIFT)
+#define DMPHY_MR1		(0x028 << DMPHY_SHIFT)
+#define DMPHY_MR2		(0x029 << DMPHY_SHIFT)
+#define DMPHY_MR3		(0x02A << DMPHY_SHIFT)
+#define DMPHY_ODTCR		(0x02B << DMPHY_SHIFT)
+#define DMPHY_DTCR		(0x02C << DMPHY_SHIFT)
+#define   DMPHY_DTCR_RANKEN_SHIFT	24	/* Rank Enable */
+#define   DMPHY_DTCR_RANKEN_MASK	(0xf << (DMPHY_DTCR_RANKEN_SHIFT))
+#define DMPHY_DTAR0		(0x02D << DMPHY_SHIFT)
+#define DMPHY_DTAR1		(0x02E << DMPHY_SHIFT)
+#define DMPHY_DTAR2		(0x02F << DMPHY_SHIFT)
+#define DMPHY_DTAR3		(0x030 << DMPHY_SHIFT)
+#define DMPHY_DTDR0		(0x031 << DMPHY_SHIFT)
+#define DMPHY_DTDR1		(0x032 << DMPHY_SHIFT)
+#define DMPHY_DTEDR0		(0x033 << DMPHY_SHIFT)
+#define DMPHY_DTEDR1		(0x034 << DMPHY_SHIFT)
+#define DMPHY_ZQCR		(0x090 << DMPHY_SHIFT)
+#define   DMPHY_ZQCR_AVGEN			BIT(16)	/* Average Algorithm */
+#define   DMPHY_ZQCR_FORCE_ZCAL_VT_UPDATE	BIT(27)	/* force VT update */
+/* ZQ */
+#define DMPHY_ZQ_BASE		(0x091 << DMPHY_SHIFT)
+#define DMPHY_ZQ_STRIDE		(0x004 << DMPHY_SHIFT)
+#define DMPHY_ZQ_PR		(0x000 << DMPHY_SHIFT)
+#define DMPHY_ZQ_DR		(0x001 << DMPHY_SHIFT)
+#define DMPHY_ZQ_SR		(0x002 << DMPHY_SHIFT)
+/* DATX8 */
+#define DMPHY_DX_BASE		(0x0A0 << DMPHY_SHIFT)
+#define DMPHY_DX_STRIDE		(0x020 << DMPHY_SHIFT)
+#define DMPHY_DX_GCR0		(0x000 << DMPHY_SHIFT)
+#define   DMPHY_DX_GCR0_WLRKEN_SHIFT	26	/* Write Level Rank Enable */
+#define   DMPHY_DX_GCR0_WLRKEN_MASK	(0xf << (DMPHY_DX_GCR0_WLRKEN_SHIFT))
+#define DMPHY_DX_GCR1		(0x001 << DMPHY_SHIFT)
+#define DMPHY_DX_GCR2		(0x002 << DMPHY_SHIFT)
+#define DMPHY_DX_GCR3		(0x003 << DMPHY_SHIFT)
+#define DMPHY_DX_GSR0		(0x004 << DMPHY_SHIFT)
+#define DMPHY_DX_GSR1		(0x005 << DMPHY_SHIFT)
+#define DMPHY_DX_GSR2		(0x006 << DMPHY_SHIFT)
+#define DMPHY_DX_BDLR0		(0x007 << DMPHY_SHIFT)
+#define DMPHY_DX_BDLR1		(0x008 << DMPHY_SHIFT)
+#define DMPHY_DX_BDLR2		(0x009 << DMPHY_SHIFT)
+#define DMPHY_DX_BDLR3		(0x00A << DMPHY_SHIFT)
+#define DMPHY_DX_BDLR4		(0x00B << DMPHY_SHIFT)
+#define DMPHY_DX_BDLR5		(0x00C << DMPHY_SHIFT)
+#define DMPHY_DX_BDLR6		(0x00D << DMPHY_SHIFT)
+#define DMPHY_DX_LCDLR0		(0x00E << DMPHY_SHIFT)
+#define DMPHY_DX_LCDLR1		(0x00F << DMPHY_SHIFT)
+#define DMPHY_DX_LCDLR2		(0x010 << DMPHY_SHIFT)
+#define DMPHY_DX_MDLR		(0x011 << DMPHY_SHIFT)
+#define DMPHY_DX_GTR		(0x012 << DMPHY_SHIFT)
+
+#endif /* ARCH_DDRMPHY_REGS_H */
diff --git a/arch/arm/mach-uniphier/dram/umc-proxstream2.c b/arch/arm/mach-uniphier/dram/umc-proxstream2.c
new file mode 100644
index 0000000..63a84e6
--- /dev/null
+++ b/arch/arm/mach-uniphier/dram/umc-proxstream2.c
@@ -0,0 +1,669 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * based on commit 21b6e480f92ccc38fe0502e3116411d6509d3bf2 of Diag by:
+ * Copyright (C) 2015 Socionext Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <asm/processor.h>
+
+#include "../init.h"
+#include "../soc-info.h"
+#include "ddrmphy-regs.h"
+
+/* UM registers */
+#define UMC_MBUS0		0x00080004
+#define UMC_MBUS1		0x00081004
+#define UMC_MBUS2		0x00082004
+#define UMC_MBUS3		0x00083004
+
+/* UD registers */
+#define UMC_BITPERPIXELMODE_D0	0x010
+#define UMC_PAIR1DOFF_D0	0x054
+
+/* DC registers */
+#define UMC_INITSET		0x014
+#define UMC_INITSTAT		0x018
+#define UMC_CMDCTLA		0x000
+#define UMC_CMDCTLB		0x004
+#define UMC_SPCCTLA		0x030
+#define UMC_SPCCTLB		0x034
+#define UMC_SPCSETB		0x03c
+#define   UMC_SPCSETB_AREFMD_MASK	(0x3)	/* Auto Refresh Mode */
+#define   UMC_SPCSETB_AREFMD_ARB	(0x0)	/* control by arbitor */
+#define   UMC_SPCSETB_AREFMD_CONT	(0x1)	/* control by DRAMCONT */
+#define   UMC_SPCSETB_AREFMD_REG	(0x2)	/* control by register */
+#define UMC_ACSSETA		0x060
+#define UMC_FLOWCTLA		0x400
+#define UMC_FLOWCTLB		0x404
+#define UMC_FLOWCTLC		0x408
+#define UMC_FLOWCTLG		0x508
+#define UMC_FLOWCTLOB0		0x520
+#define UMC_FLOWCTLOB1		0x524
+#define UMC_RDATACTL_D0		0x600
+#define   UMC_RDATACTL_RADLTY_SHIFT	4
+#define   UMC_RDATACTL_RADLTY_MASK	(0xf << (UMC_RDATACTL_RADLTY_SHIFT))
+#define   UMC_RDATACTL_RAD2LTY_SHIFT	8
+#define   UMC_RDATACTL_RAD2LTY_MASK	(0xf << (UMC_RDATACTL_RAD2LTY_SHIFT))
+#define UMC_WDATACTL_D0		0x604
+#define UMC_RDATACTL_D1		0x608
+#define UMC_WDATACTL_D1		0x60c
+#define UMC_DATASET		0x610
+#define UMC_RESPCTL		0x624
+#define UMC_DCCGCTL		0x720
+#define UMC_ERRMASKA		0x958
+#define UMC_ERRMASKB		0x95c
+#define UMC_BSICMAPSET		0x988
+#define UMC_DIOCTLA		0xc00
+#define   UMC_DIOCTLA_CTL_NRST		BIT(8)	/* ctl_rst_n */
+#define   UMC_DIOCTLA_CFG_NRST		BIT(0)	/* cfg_rst_n */
+#define UMC_DFICUPDCTLA		0xc20
+
+enum dram_freq {
+	FREQ_1866M,
+	FREQ_2133M,
+	FREQ_NR,
+};
+
+enum dram_size {
+	SIZE_0,
+	SIZE_512M,
+	SIZE_1G,
+	SIZE_NR,
+};
+
+static u32 ddrphy_pgcr2[FREQ_NR] = {0x00FC7E5D, 0x00FC90AB};
+static u32 ddrphy_ptr0[FREQ_NR] = {0x0EA09205, 0x10C0A6C6};
+static u32 ddrphy_ptr1[FREQ_NR] = {0x0DAC041B, 0x0FA104B1};
+static u32 ddrphy_ptr3[FREQ_NR] = {0x15171e45, 0x18182357};
+static u32 ddrphy_ptr4[FREQ_NR] = {0x0e9ad8e9, 0x10b34157};
+static u32 ddrphy_dtpr0[FREQ_NR] = {0x35a00d88, 0x39e40e88};
+static u32 ddrphy_dtpr1[FREQ_NR] = {0x2288cc2c, 0x228a04d0};
+static u32 ddrphy_dtpr2[FREQ_NR] = {0x50005e00, 0x50006a00};
+static u32 ddrphy_dtpr3[FREQ_NR] = {0x0010cb49, 0x0010ec89};
+static u32 ddrphy_mr0[FREQ_NR] = {0x00000115, 0x00000125};
+static u32 ddrphy_mr2[FREQ_NR] = {0x000002a0, 0x000002a8};
+
+static u32 umc_cmdctla[FREQ_NR] = {0x66DD131D, 0x77EE1722};
+/*
+ * The ch2 is a different generation UMC core.
+ * The register spec is different, unfortunately.
+ */
+static u32 umc_cmdctlb_ch01[FREQ_NR] = {0x13E87C44, 0x18F88C44};
+static u32 umc_cmdctlb_ch2[FREQ_NR] = {0x19E8DC44, 0x1EF8EC44};
+static u32 umc_spcctla[FREQ_NR][SIZE_NR] = {
+	{0x00000000, 0x004A071D, 0x0078071D},
+	{0x00000000, 0x0055081E, 0x0089081E},
+};
+
+static u32 umc_spcctlb[] = {0x00FF000A, 0x00FF000B};
+/* The ch2 is different for some reason only hardware guys know... */
+static u32 umc_flowctla_ch01[] = {0x0800001E, 0x08000022};
+static u32 umc_flowctla_ch2[] = {0x0800001E, 0x0800001E};
+
+/* DDR multiPHY */
+static inline int ddrphy_get_rank(int dx)
+{
+	return dx / 2;
+}
+
+static void ddrphy_fifo_reset(void __iomem *phy_base)
+{
+	u32 tmp;
+
+	tmp = readl(phy_base + DMPHY_PGCR0);
+	tmp &= ~DMPHY_PGCR0_PHYFRST;
+	writel(tmp, phy_base + DMPHY_PGCR0);
+
+	udelay(1);
+
+	tmp |= DMPHY_PGCR0_PHYFRST;
+	writel(tmp, phy_base + DMPHY_PGCR0);
+
+	udelay(1);
+}
+
+static void ddrphy_vt_ctrl(void __iomem *phy_base, int enable)
+{
+	u32 tmp;
+
+	tmp = readl(phy_base + DMPHY_PGCR1);
+
+	if (enable)
+		tmp &= ~DMPHY_PGCR1_INHVT;
+	else
+		tmp |= DMPHY_PGCR1_INHVT;
+
+	writel(tmp, phy_base + DMPHY_PGCR1);
+
+	if (!enable) {
+		while (!(readl(phy_base + DMPHY_PGSR1) & DMPHY_PGSR1_VTSTOP))
+			cpu_relax();
+	}
+}
+
+static void ddrphy_dqs_delay_fixup(void __iomem *phy_base, int nr_dx, int step)
+{
+	int dx;
+	u32 lcdlr1, rdqsd;
+	void __iomem *dx_base = phy_base + DMPHY_DX_BASE;
+
+	ddrphy_vt_ctrl(phy_base, 0);
+
+	for (dx = 0; dx < nr_dx; dx++) {
+		lcdlr1 = readl(dx_base + DMPHY_DX_LCDLR1);
+		rdqsd = (lcdlr1 >> 8) & 0xff;
+		rdqsd = clamp(rdqsd + step, 0U, 0xffU);
+		lcdlr1 = (lcdlr1 & ~(0xff << 8)) | (rdqsd << 8);
+		writel(lcdlr1, dx_base + DMPHY_DX_LCDLR1);
+		readl(dx_base + DMPHY_DX_LCDLR1); /* relax */
+		dx_base += DMPHY_DX_STRIDE;
+	}
+
+	ddrphy_vt_ctrl(phy_base, 1);
+}
+
+static int ddrphy_get_system_latency(void __iomem *phy_base, int width)
+{
+	void __iomem *dx_base = phy_base + DMPHY_DX_BASE;
+	const int nr_dx = width / 8;
+	int dx, rank;
+	u32 gtr;
+	int dgsl, dgsl_min = INT_MAX, dgsl_max = 0;
+
+	for (dx = 0; dx < nr_dx; dx++) {
+		gtr = readl(dx_base + DMPHY_DX_GTR);
+		for (rank = 0; rank < 4; rank++) {
+			dgsl = gtr & 0x7;
+			/* if dgsl is zero, this rank was not trained. skip. */
+			if (dgsl) {
+				dgsl_min = min(dgsl_min, dgsl);
+				dgsl_max = max(dgsl_max, dgsl);
+			}
+			gtr >>= 3;
+		}
+		dx_base += DMPHY_DX_STRIDE;
+	}
+
+	if (dgsl_min != dgsl_max)
+		printf("DQS Gateing System Latencies are not all leveled.\n");
+
+	return dgsl_max;
+}
+
+static void ddrphy_init(void __iomem *phy_base, enum dram_freq freq, int width)
+{
+	u32 tmp;
+	void __iomem *zq_base, *dx_base;
+	int zq, dx;
+	int nr_dx;
+
+	nr_dx = width / 8;
+
+	writel(DMPHY_PIR_ZCALBYP,        phy_base + DMPHY_PIR);
+	/*
+	 * Disable RGLVT bit (Read DQS Gating LCDL Delay VT Compensation)
+	 * to avoid read error issue.
+	 */
+	writel(0x07d81e37,         phy_base + DMPHY_PGCR0);
+	writel(0x0200c4e0,         phy_base + DMPHY_PGCR1);
+
+	tmp = ddrphy_pgcr2[freq];
+	if (width >= 32)
+		tmp |= DMPHY_PGCR2_DUALCHN | DMPHY_PGCR2_ACPDDC;
+	writel(tmp, phy_base + DMPHY_PGCR2);
+
+	writel(ddrphy_ptr0[freq],  phy_base + DMPHY_PTR0);
+	writel(ddrphy_ptr1[freq],  phy_base + DMPHY_PTR1);
+	writel(0x00083def,         phy_base + DMPHY_PTR2);
+	writel(ddrphy_ptr3[freq],  phy_base + DMPHY_PTR3);
+	writel(ddrphy_ptr4[freq],  phy_base + DMPHY_PTR4);
+
+	writel(0x55555555, phy_base + DMPHY_ACIOCR1);
+	writel(0x00000000, phy_base + DMPHY_ACIOCR2);
+	writel(0x55555555, phy_base + DMPHY_ACIOCR3);
+	writel(0x00000000, phy_base + DMPHY_ACIOCR4);
+	writel(0x00000055, phy_base + DMPHY_ACIOCR5);
+	writel(0x00181aa4, phy_base + DMPHY_DXCCR);
+
+	writel(0x0024641e, phy_base + DMPHY_DSGCR);
+	writel(0x0000040b, phy_base + DMPHY_DCR);
+	writel(ddrphy_dtpr0[freq], phy_base + DMPHY_DTPR0);
+	writel(ddrphy_dtpr1[freq], phy_base + DMPHY_DTPR1);
+	writel(ddrphy_dtpr2[freq], phy_base + DMPHY_DTPR2);
+	writel(ddrphy_dtpr3[freq], phy_base + DMPHY_DTPR3);
+	writel(ddrphy_mr0[freq], phy_base + DMPHY_MR0);
+	writel(0x00000006,       phy_base + DMPHY_MR1);
+	writel(ddrphy_mr2[freq], phy_base + DMPHY_MR2);
+	writel(0x00000000,       phy_base + DMPHY_MR3);
+
+	tmp = 0;
+	for (dx = 0; dx < nr_dx; dx++)
+		tmp |= BIT(DMPHY_DTCR_RANKEN_SHIFT + ddrphy_get_rank(dx));
+	writel(0x90003087 | tmp, phy_base + DMPHY_DTCR);
+
+	writel(0x00000000, phy_base + DMPHY_DTAR0);
+	writel(0x00000008, phy_base + DMPHY_DTAR1);
+	writel(0x00000010, phy_base + DMPHY_DTAR2);
+	writel(0x00000018, phy_base + DMPHY_DTAR3);
+	writel(0xdd22ee11, phy_base + DMPHY_DTDR0);
+	writel(0x7788bb44, phy_base + DMPHY_DTDR1);
+
+	/* impedance control settings */
+	writel(0x04048900, phy_base + DMPHY_ZQCR);
+
+	zq_base = phy_base + DMPHY_ZQ_BASE;
+	for (zq = 0; zq < 4; zq++) {
+		/*
+		 * board-dependent
+		 * PXS2: CH0ZQ0=0x5B, CH1ZQ0=0x5B, CH2ZQ0=0x59, others=0x5D
+		 */
+		writel(0x0007BB5D, zq_base + DMPHY_ZQ_PR);
+		zq_base += DMPHY_ZQ_STRIDE;
+	}
+
+	/* DATX8 settings */
+	dx_base = phy_base + DMPHY_DX_BASE;
+	for (dx = 0; dx < 4; dx++) {
+		tmp = readl(dx_base + DMPHY_DX_GCR0);
+		tmp &= ~DMPHY_DX_GCR0_WLRKEN_MASK;
+		tmp |= BIT(DMPHY_DX_GCR0_WLRKEN_SHIFT + ddrphy_get_rank(dx)) &
+						DMPHY_DX_GCR0_WLRKEN_MASK;
+		writel(tmp, dx_base + DMPHY_DX_GCR0);
+
+		writel(0x00000000, dx_base + DMPHY_DX_GCR1);
+		writel(0x00000000, dx_base + DMPHY_DX_GCR2);
+		writel(0x00000000, dx_base + DMPHY_DX_GCR3);
+		dx_base += DMPHY_DX_STRIDE;
+	}
+
+	while (!(readl(phy_base + DMPHY_PGSR0) & DMPHY_PGSR0_IDONE))
+		cpu_relax();
+
+	ddrphy_dqs_delay_fixup(phy_base, nr_dx, -4);
+}
+
+struct ddrphy_init_sequence {
+	char *description;
+	u32 init_flag;
+	u32 done_flag;
+	u32 err_flag;
+};
+
+static const struct ddrphy_init_sequence impedance_calibration_sequence[] = {
+	{
+		"Impedance Calibration",
+		DMPHY_PIR_ZCAL,
+		DMPHY_PGSR0_ZCDONE,
+		DMPHY_PGSR0_ZCERR,
+	},
+	{ /* sentinel */ }
+};
+
+static const struct ddrphy_init_sequence dram_init_sequence[] = {
+	{
+		"DRAM Initialization",
+		DMPHY_PIR_DRAMRST | DMPHY_PIR_DRAMINIT,
+		DMPHY_PGSR0_DIDONE,
+		0,
+	},
+	{ /* sentinel */ }
+};
+
+static const struct ddrphy_init_sequence training_sequence[] = {
+	{
+		"Write Leveling",
+		DMPHY_PIR_WL,
+		DMPHY_PGSR0_WLDONE,
+		DMPHY_PGSR0_WLERR,
+	},
+	{
+		"Read DQS Gate Training",
+		DMPHY_PIR_QSGATE,
+		DMPHY_PGSR0_QSGDONE,
+		DMPHY_PGSR0_QSGERR,
+	},
+	{
+		"Write Leveling Adjustment",
+		DMPHY_PIR_WLADJ,
+		DMPHY_PGSR0_WLADONE,
+		DMPHY_PGSR0_WLAERR,
+	},
+	{
+		"Read Bit Deskew",
+		DMPHY_PIR_RDDSKW,
+		DMPHY_PGSR0_RDDONE,
+		DMPHY_PGSR0_RDERR,
+	},
+	{
+		"Write Bit Deskew",
+		DMPHY_PIR_WRDSKW,
+		DMPHY_PGSR0_WDDONE,
+		DMPHY_PGSR0_WDERR,
+	},
+	{
+		"Read Eye Training",
+		DMPHY_PIR_RDEYE,
+		DMPHY_PGSR0_REDONE,
+		DMPHY_PGSR0_REERR,
+	},
+	{
+		"Write Eye Training",
+		DMPHY_PIR_WREYE,
+		DMPHY_PGSR0_WEDONE,
+		DMPHY_PGSR0_WEERR,
+	},
+	{ /* sentinel */ }
+};
+
+static int __ddrphy_training(void __iomem *phy_base,
+			     const struct ddrphy_init_sequence *seq)
+{
+	const struct ddrphy_init_sequence *s;
+	u32 pgsr0;
+	u32 init_flag = DMPHY_PIR_INIT;
+	u32 done_flag = DMPHY_PGSR0_IDONE;
+	int timeout = 50000; /* 50 msec is long enough */
+#ifdef DISPLAY_ELAPSED_TIME
+	ulong start = get_timer(0);
+#endif
+
+	for (s = seq; s->description; s++) {
+		init_flag |= s->init_flag;
+		done_flag |= s->done_flag;
+	}
+
+	writel(init_flag, phy_base + DMPHY_PIR);
+
+	do {
+		if (--timeout < 0) {
+			printf("%s: error: timeout during DDR training\n",
+			       __func__);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+		pgsr0 = readl(phy_base + DMPHY_PGSR0);
+	} while ((pgsr0 & done_flag) != done_flag);
+
+	for (s = seq; s->description; s++) {
+		if (pgsr0 & s->err_flag) {
+			printf("%s: error: %s failed\n", __func__,
+			       s->description);
+			return -EIO;
+		}
+	}
+
+#ifdef DISPLAY_ELAPSED_TIME
+	printf("%s: info: elapsed time %ld msec\n", get_timer(start));
+#endif
+
+	return 0;
+}
+
+static int ddrphy_impedance_calibration(void __iomem *phy_base)
+{
+	int ret;
+	u32 tmp;
+
+	ret = __ddrphy_training(phy_base, impedance_calibration_sequence);
+	if (ret)
+		return ret;
+
+	/*
+	 * Because of a hardware bug, IDONE flag is set when the first ZQ block
+	 * is calibrated.  The flag does not guarantee the completion for all
+	 * the ZQ blocks.  Wait a little more just in case.
+	 */
+	udelay(1);
+
+	/* reflect ZQ settings and enable average algorithm*/
+	tmp = readl(phy_base + DMPHY_ZQCR);
+	tmp |= DMPHY_ZQCR_FORCE_ZCAL_VT_UPDATE;
+	writel(tmp, phy_base + DMPHY_ZQCR);
+	tmp &= ~DMPHY_ZQCR_FORCE_ZCAL_VT_UPDATE;
+	tmp |= DMPHY_ZQCR_AVGEN;
+	writel(tmp, phy_base + DMPHY_ZQCR);
+
+	return 0;
+}
+
+static int ddrphy_dram_init(void __iomem *phy_base)
+{
+	return __ddrphy_training(phy_base, dram_init_sequence);
+}
+
+static int ddrphy_training(void __iomem *phy_base)
+{
+	return __ddrphy_training(phy_base, training_sequence);
+}
+
+/* UMC */
+static void umc_set_system_latency(void __iomem *umc_dc_base, int phy_latency)
+{
+	u32 val;
+	int latency;
+
+	val = readl(umc_dc_base + UMC_RDATACTL_D0);
+	latency = (val & UMC_RDATACTL_RADLTY_MASK) >> UMC_RDATACTL_RADLTY_SHIFT;
+	latency += (val & UMC_RDATACTL_RAD2LTY_MASK) >>
+						UMC_RDATACTL_RAD2LTY_SHIFT;
+	/*
+	 * UMC works at the half clock rate of the PHY.
+	 * The LSB of latency is ignored
+	 */
+	latency += phy_latency & ~1;
+
+	val &= ~(UMC_RDATACTL_RADLTY_MASK | UMC_RDATACTL_RAD2LTY_MASK);
+	if (latency > 0xf) {
+		val |= 0xf << UMC_RDATACTL_RADLTY_SHIFT;
+		val |= (latency - 0xf) << UMC_RDATACTL_RAD2LTY_SHIFT;
+	} else {
+		val |= latency << UMC_RDATACTL_RADLTY_SHIFT;
+	}
+
+	writel(val, umc_dc_base + UMC_RDATACTL_D0);
+	writel(val, umc_dc_base + UMC_RDATACTL_D1);
+
+	readl(umc_dc_base + UMC_RDATACTL_D1); /* relax */
+}
+
+/* enable/disable auto refresh */
+void umc_refresh_ctrl(void __iomem *umc_dc_base, int enable)
+{
+	u32 tmp;
+
+	tmp = readl(umc_dc_base + UMC_SPCSETB);
+	tmp &= ~UMC_SPCSETB_AREFMD_MASK;
+
+	if (enable)
+		tmp |= UMC_SPCSETB_AREFMD_ARB;
+	else
+		tmp |= UMC_SPCSETB_AREFMD_REG;
+
+	writel(tmp, umc_dc_base + UMC_SPCSETB);
+	udelay(1);
+}
+
+static void umc_ud_init(void __iomem *umc_base, int ch)
+{
+	writel(0x00000003, umc_base + UMC_BITPERPIXELMODE_D0);
+
+	if (ch == 2)
+		writel(0x00000033, umc_base + UMC_PAIR1DOFF_D0);
+}
+
+static void umc_dc_init(void __iomem *umc_dc_base, enum dram_freq freq,
+			enum dram_size size, int ch, int width)
+{
+	int latency;
+	u32 val;
+
+	writel(umc_cmdctla[freq], umc_dc_base + UMC_CMDCTLA);
+
+	writel(ch == 2 ? umc_cmdctlb_ch2[freq] : umc_cmdctlb_ch01[freq],
+	       umc_dc_base + UMC_CMDCTLB);
+
+	writel(umc_spcctla[freq][size / (width / 16)],
+	       umc_dc_base + UMC_SPCCTLA);
+	writel(umc_spcctlb[freq], umc_dc_base + UMC_SPCCTLB);
+
+	val = 0x000e000e;
+	latency = 12;
+	/* ES2 inserted one more FF to the logic. */
+	if (uniphier_get_soc_model() >= 2)
+		latency += 2;
+
+	if (latency > 0xf) {
+		val |= 0xf << UMC_RDATACTL_RADLTY_SHIFT;
+		val |= (latency - 0xf) << UMC_RDATACTL_RAD2LTY_SHIFT;
+	} else {
+		val |= latency << UMC_RDATACTL_RADLTY_SHIFT;
+	}
+
+	writel(val, umc_dc_base + UMC_RDATACTL_D0);
+	if (width >= 32)
+		writel(val, umc_dc_base + UMC_RDATACTL_D1);
+
+	writel(0x04060A02, umc_dc_base + UMC_WDATACTL_D0);
+	if (width >= 32)
+		writel(0x04060A02, umc_dc_base + UMC_WDATACTL_D1);
+	writel(0x04000000, umc_dc_base + UMC_DATASET);
+	writel(0x00400020, umc_dc_base + UMC_DCCGCTL);
+	writel(0x00000084, umc_dc_base + UMC_FLOWCTLG);
+	writel(0x00000000, umc_dc_base + UMC_ACSSETA);
+
+	writel(ch == 2 ? umc_flowctla_ch2[freq] : umc_flowctla_ch01[freq],
+	       umc_dc_base + UMC_FLOWCTLA);
+
+	writel(0x00004400, umc_dc_base + UMC_FLOWCTLC);
+	writel(0x200A0A00, umc_dc_base + UMC_SPCSETB);
+	writel(0x00000520, umc_dc_base + UMC_DFICUPDCTLA);
+	writel(0x0000000D, umc_dc_base + UMC_RESPCTL);
+
+	if (ch != 2) {
+		writel(0x00202000, umc_dc_base + UMC_FLOWCTLB);
+		writel(0xFDBFFFFF, umc_dc_base + UMC_FLOWCTLOB0);
+		writel(0xFFFFFFFF, umc_dc_base + UMC_FLOWCTLOB1);
+		writel(0x00080700, umc_dc_base + UMC_BSICMAPSET);
+	} else {
+		writel(0x00200000, umc_dc_base + UMC_FLOWCTLB);
+		writel(0x00000000, umc_dc_base + UMC_BSICMAPSET);
+	}
+
+	writel(0x00000000, umc_dc_base + UMC_ERRMASKA);
+	writel(0x00000000, umc_dc_base + UMC_ERRMASKB);
+}
+
+static int umc_init(void __iomem *umc_base, enum dram_freq freq, int ch,
+		    enum dram_size size, int width)
+{
+	void __iomem *umc_dc_base = umc_base + 0x00011000;
+	void __iomem *phy_base = umc_base + 0x00030000;
+	int ret;
+
+	writel(0x00000002, umc_dc_base + UMC_INITSET);
+	while (readl(umc_dc_base + UMC_INITSTAT) & BIT(2))
+		cpu_relax();
+
+	/* deassert PHY reset signals */
+	writel(UMC_DIOCTLA_CTL_NRST | UMC_DIOCTLA_CFG_NRST,
+	       umc_dc_base + UMC_DIOCTLA);
+
+	ddrphy_init(phy_base, freq, width);
+
+	ret = ddrphy_impedance_calibration(phy_base);
+	if (ret)
+		return ret;
+
+	ddrphy_dram_init(phy_base);
+	if (ret)
+		return ret;
+
+	umc_dc_init(umc_dc_base, freq, size, ch, width);
+
+	umc_ud_init(umc_base, ch);
+
+	if (size) {
+		ret = ddrphy_training(phy_base);
+		if (ret)
+			return ret;
+	}
+
+	udelay(1);
+
+	/* match the system latency between UMC and PHY */
+	umc_set_system_latency(umc_dc_base,
+			       ddrphy_get_system_latency(phy_base, width));
+
+	udelay(1);
+
+	/* stop auto refresh before clearing FIFO in PHY */
+	umc_refresh_ctrl(umc_dc_base, 0);
+	ddrphy_fifo_reset(phy_base);
+	umc_refresh_ctrl(umc_dc_base, 1);
+
+	udelay(10);
+
+	return 0;
+}
+
+static void um_init(void __iomem *um_base)
+{
+	writel(0x000000ff, um_base + UMC_MBUS0);
+	writel(0x000000ff, um_base + UMC_MBUS1);
+	writel(0x000000ff, um_base + UMC_MBUS2);
+	writel(0x000000ff, um_base + UMC_MBUS3);
+}
+
+int proxstream2_umc_init(const struct uniphier_board_data *bd)
+{
+	void __iomem *um_base = (void __iomem *)0x5b600000;
+	void __iomem *umc_ch0_base = (void __iomem *)0x5b800000;
+	void __iomem *umc_ch1_base = (void __iomem *)0x5ba00000;
+	void __iomem *umc_ch2_base = (void __iomem *)0x5bc00000;
+	enum dram_freq freq;
+	int ret;
+
+	switch (bd->dram_freq) {
+	case 1866:
+		freq = FREQ_1866M;
+		break;
+	case 2133:
+		freq = FREQ_2133M;
+		break;
+	default:
+		printf("unsupported DRAM frequency %d MHz\n", bd->dram_freq);
+		return -EINVAL;
+	}
+
+	ret = umc_init(umc_ch0_base, freq, 0, bd->dram_ch0_size / SZ_256M,
+		       bd->dram_ch0_width);
+	if (ret) {
+		printf("failed to initialize UMC ch0\n");
+		return ret;
+	}
+
+	ret = umc_init(umc_ch1_base, freq, 1, bd->dram_ch1_size / SZ_256M,
+		       bd->dram_ch1_width);
+	if (ret) {
+		printf("failed to initialize UMC ch1\n");
+		return ret;
+	}
+
+	ret = umc_init(umc_ch2_base, freq, 2, bd->dram_ch2_size / SZ_256M,
+		       bd->dram_ch2_width);
+	if (ret) {
+		printf("failed to initialize UMC ch2\n");
+		return ret;
+	}
+
+	um_init(um_base);
+
+	return 0;
+}
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index 27ae27d..0a47e70 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -80,6 +80,7 @@
 int ph1_ld4_umc_init(const struct uniphier_board_data *bd);
 int ph1_pro4_umc_init(const struct uniphier_board_data *bd);
 int ph1_sld8_umc_init(const struct uniphier_board_data *bd);
+int proxstream2_umc_init(const struct uniphier_board_data *bd);
 
 void ph1_sld3_pin_init(void);
 void ph1_ld4_pin_init(void);
diff --git a/arch/arm/mach-uniphier/init/init-proxstream2.c b/arch/arm/mach-uniphier/init/init-proxstream2.c
index 859e2e9..029c544 100644
--- a/arch/arm/mach-uniphier/init/init-proxstream2.c
+++ b/arch/arm/mach-uniphier/init/init-proxstream2.c
@@ -12,6 +12,8 @@
 
 int proxstream2_init(const struct uniphier_board_data *bd)
 {
+	int ret;
+
 	proxstream2_sbc_init(bd);
 
 	support_card_reset();
@@ -37,5 +39,11 @@
 
 	led_puts("L4");
 
+	ret = proxstream2_umc_init(bd);
+	if (ret)
+		return ret;
+
+	led_puts("L5");
+
 	return 0;
 }