ColdFire: Clean up checkpatch warnings for MCF52x2

Signed-off-by: Alison Wang <b18965@freescale.com>
diff --git a/arch/m68k/cpu/mcf52x2/cpu.c b/arch/m68k/cpu/mcf52x2/cpu.c
index 571d078..7c6100c 100644
--- a/arch/m68k/cpu/mcf52x2/cpu.c
+++ b/arch/m68k/cpu/mcf52x2/cpu.c
@@ -9,6 +9,8 @@
  * MCF5275 additions
  * Copyright (C) 2008 Arthur Shipkowski (art@videon-central.com)
  *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -32,6 +34,7 @@
 #include <watchdog.h>
 #include <command.h>
 #include <asm/immap.h>
+#include <asm/io.h>
 #include <netdev.h>
 #include "cpu.h"
 
@@ -40,11 +43,11 @@
 #ifdef	CONFIG_M5208
 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	volatile rcm_t *rcm = (rcm_t *)(MMAP_RCM);
+	rcm_t *rcm = (rcm_t *)(MMAP_RCM);
 
 	udelay(1000);
 
-	rcm->rcr = RCM_RCR_SOFTRST;
+	out_8(&rcm->rcr, RCM_RCR_SOFTRST);
 
 	/* we don't return! */
 	return 0;
@@ -65,18 +68,21 @@
 /* Called by macro WATCHDOG_RESET */
 void watchdog_reset(void)
 {
-	volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
-	wdt->sr = 0x5555;
-	wdt->sr = 0xAAAA;
+	wdog_t *wdt = (wdog_t *)(MMAP_WDOG);
+
+	out_be16(&wdt->sr, 0x5555);
+	out_be16(&wdt->sr, 0xaaaa);
 }
 
 int watchdog_disable(void)
 {
-	volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
+	wdog_t *wdt = (wdog_t *)(MMAP_WDOG);
 
-	wdt->sr = 0x5555; /* reset watchdog counter */
-	wdt->sr = 0xAAAA;
-	wdt->cr = 0;	/* disable watchdog timer */
+	/* reset watchdog counter */
+	out_be16(&wdt->sr, 0x5555);
+	out_be16(&wdt->sr, 0xaaaa);
+	/* disable watchdog timer */
+	out_be16(&wdt->cr, 0);
 
 	puts("WATCHDOG:disabled\n");
 	return (0);
@@ -84,15 +90,18 @@
 
 int watchdog_init(void)
 {
-	volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
+	wdog_t *wdt = (wdog_t *)(MMAP_WDOG);
 
-	wdt->cr = 0;	/* disable watchdog */
+	/* disable watchdog */
+	out_be16(&wdt->cr, 0);
 
 	/* set timeout and enable watchdog */
-	wdt->mr =
-		((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1;
-	wdt->sr = 0x5555; /* reset watchdog counter */
-	wdt->sr = 0xAAAA;
+	out_be16(&wdt->mr,
+		(CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000) - 1);
+
+	/* reset watchdog counter */
+	out_be16(&wdt->sr, 0x5555);
+	out_be16(&wdt->sr, 0xaaaa);
 
 	puts("WATCHDOG:enabled\n");
 	return (0);
@@ -178,13 +187,13 @@
 #ifdef	CONFIG_M5272
 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
+	wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
 
-	wdp->wdog_wrrr = 0;
+	out_be16(&wdp->wdog_wrrr, 0);
 	udelay(1000);
 
 	/* enable watchdog, set timeout to 0 and wait */
-	wdp->wdog_wrrr = 1;
+	out_be16(&wdp->wdog_wrrr, 1);
 	while (1) ;
 
 	/* we don't return! */
@@ -193,12 +202,12 @@
 
 int checkcpu(void)
 {
-	volatile sysctrl_t *sysctrl = (sysctrl_t *) (MMAP_CFG);
+	sysctrl_t *sysctrl = (sysctrl_t *) (MMAP_CFG);
 	uchar msk;
 	char *suf;
 
 	puts("CPU:   ");
-	msk = (sysctrl->sc_dir > 28) & 0xf;
+	msk = (in_be32(&sysctrl->sc_dir) > 28) & 0xf;
 	switch (msk) {
 	case 0x2:
 		suf = "1K75N";
@@ -221,17 +230,21 @@
 /* Called by macro WATCHDOG_RESET */
 void watchdog_reset(void)
 {
-	volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
-	wdt->wdog_wcr = 0;
+	wdog_t *wdt = (wdog_t *)(MMAP_WDOG);
+
+	out_be16(&wdt->wdog_wcr, 0);
 }
 
 int watchdog_disable(void)
 {
-	volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
+	wdog_t *wdt = (wdog_t *)(MMAP_WDOG);
 
-	wdt->wdog_wcr = 0;	/* reset watchdog counter */
-	wdt->wdog_wirr = 0;	/* disable watchdog interrupt */
-	wdt->wdog_wrrr = 0;	/* disable watchdog timer */
+	/* reset watchdog counter */
+	out_be16(&wdt->wdog_wcr, 0);
+	/* disable watchdog interrupt */
+	out_be16(&wdt->wdog_wirr, 0);
+	/* disable watchdog timer */
+	out_be16(&wdt->wdog_wrrr, 0);
 
 	puts("WATCHDOG:disabled\n");
 	return (0);
@@ -239,14 +252,17 @@
 
 int watchdog_init(void)
 {
-	volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
+	wdog_t *wdt = (wdog_t *)(MMAP_WDOG);
 
-	wdt->wdog_wirr = 0;	/* disable watchdog interrupt */
+	/* disable watchdog interrupt */
+	out_be16(&wdt->wdog_wirr, 0);
 
 	/* set timeout and enable watchdog */
-	wdt->wdog_wrrr =
-	    ((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1;
-	wdt->wdog_wcr = 0;	/* reset watchdog counter */
+	out_be16(&wdt->wdog_wrrr,
+		(CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000) - 1);
+
+	/* reset watchdog counter */
+	out_be16(&wdt->wdog_wcr, 0);
 
 	puts("WATCHDOG:enabled\n");
 	return (0);
@@ -258,11 +274,11 @@
 #ifdef	CONFIG_M5275
 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	volatile rcm_t *rcm = (rcm_t *)(MMAP_RCM);
+	rcm_t *rcm = (rcm_t *)(MMAP_RCM);
 
 	udelay(1000);
 
-	rcm->rcr = RCM_RCR_SOFTRST;
+	out_8(&rcm->rcr, RCM_RCR_SOFTRST);
 
 	/* we don't return! */
 	return 0;
@@ -282,18 +298,22 @@
 /* Called by macro WATCHDOG_RESET */
 void watchdog_reset(void)
 {
-	volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
-	wdt->wsr = 0x5555;
-	wdt->wsr = 0xAAAA;
+	wdog_t *wdt = (wdog_t *)(MMAP_WDOG);
+
+	out_be16(&wdt->wsr, 0x5555);
+	out_be16(&wdt->wsr, 0xaaaa);
 }
 
 int watchdog_disable(void)
 {
-	volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
+	wdog_t *wdt = (wdog_t *)(MMAP_WDOG);
 
-	wdt->wsr = 0x5555; /* reset watchdog counter */
-	wdt->wsr = 0xAAAA;
-	wdt->wcr = 0;	/* disable watchdog timer */
+	/* reset watchdog counter */
+	out_be16(&wdt->wsr, 0x5555);
+	out_be16(&wdt->wsr, 0xaaaa);
+
+	/* disable watchdog timer */
+	out_be16(&wdt->wcr, 0);
 
 	puts("WATCHDOG:disabled\n");
 	return (0);
@@ -301,15 +321,18 @@
 
 int watchdog_init(void)
 {
-	volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG);
+	wdog_t *wdt = (wdog_t *)(MMAP_WDOG);
 
-	wdt->wcr = 0;	/* disable watchdog */
+	/* disable watchdog */
+	out_be16(&wdt->wcr, 0);
 
 	/* set timeout and enable watchdog */
-	wdt->wmr =
-		((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1;
-	wdt->wsr = 0x5555; /* reset watchdog counter */
-	wdt->wsr = 0xAAAA;
+	out_be16(&wdt->wmr,
+		(CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000) - 1);
+
+	/* reset watchdog counter */
+	out_be16(&wdt->wsr, 0x5555);
+	out_be16(&wdt->wsr, 0xaaaa);
 
 	puts("WATCHDOG:enabled\n");
 	return (0);
diff --git a/arch/m68k/cpu/mcf52x2/cpu_init.c b/arch/m68k/cpu/mcf52x2/cpu_init.c
index a98a926..a221420 100644
--- a/arch/m68k/cpu/mcf52x2/cpu_init.c
+++ b/arch/m68k/cpu/mcf52x2/cpu_init.c
@@ -8,7 +8,7 @@
  * (c) Copyright 2010
  * Arcturus Networks Inc. <www.arcturusnetworks.com>
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  * Hayden Fraser (Hayden.Fraser@freescale.com)
  *
@@ -37,6 +37,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <asm/immap.h>
+#include <asm/io.h>
 
 #if defined(CONFIG_CMD_NET)
 #include <config.h>
@@ -48,57 +49,57 @@
 /* Only 5272 Flexbus chipselect is different from the rest */
 void init_fbcs(void)
 {
-	volatile fbcs_t *fbcs = (fbcs_t *) (MMAP_FBCS);
+	fbcs_t *fbcs = (fbcs_t *) (MMAP_FBCS);
 
 #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
      && defined(CONFIG_SYS_CS0_CTRL))
-	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
-	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
-	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
+	out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
+	out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
+	out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
 #else
 #warning "Chip Select 0 are not initialized/used"
 #endif
 #if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
      && defined(CONFIG_SYS_CS1_CTRL))
-	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
-	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
-	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
+	out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
+	out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
+	out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
 #endif
 #if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
      && defined(CONFIG_SYS_CS2_CTRL))
-	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
-	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
-	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
+	out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
+	out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
+	out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
 #endif
 #if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
      && defined(CONFIG_SYS_CS3_CTRL))
-	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
-	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
-	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
+	out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
+	out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
+	out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
 #endif
 #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
      && defined(CONFIG_SYS_CS4_CTRL))
-	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
-	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
-	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
+	out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
+	out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
+	out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
 #endif
 #if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
      && defined(CONFIG_SYS_CS5_CTRL))
-	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
-	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
-	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
+	out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
+	out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
+	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
 #if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) \
      && defined(CONFIG_SYS_CS6_CTRL))
-	fbcs->csar6 = CONFIG_SYS_CS6_BASE;
-	fbcs->cscr6 = CONFIG_SYS_CS6_CTRL;
-	fbcs->csmr6 = CONFIG_SYS_CS6_MASK;
+	out_be32(&fbcs->csar6, CONFIG_SYS_CS6_BASE);
+	out_be32(&fbcs->cscr6, CONFIG_SYS_CS6_CTRL);
+	out_be32(&fbcs->csmr6, CONFIG_SYS_CS6_MASK);
 #endif
 #if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) \
      && defined(CONFIG_SYS_CS7_CTRL))
-	fbcs->csar7 = CONFIG_SYS_CS7_BASE;
-	fbcs->cscr7 = CONFIG_SYS_CS7_CTRL;
-	fbcs->csmr7 = CONFIG_SYS_CS7_MASK;
+	out_be32(&fbcs->csar7, CONFIG_SYS_CS7_BASE);
+	out_be32(&fbcs->cscr7, CONFIG_SYS_CS7_CTRL);
+	out_be32(&fbcs->csmr7, CONFIG_SYS_CS7_MASK);
 #endif
 }
 #endif
@@ -106,22 +107,22 @@
 #if defined(CONFIG_M5208)
 void cpu_init_f(void)
 {
-	volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+	scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
 
 #ifndef CONFIG_WATCHDOG
-	volatile wdog_t *wdg = (wdog_t *) MMAP_WDOG;
+	wdog_t *wdg = (wdog_t *) MMAP_WDOG;
 
 	/* Disable the watchdog if we aren't using it */
-	wdg->cr = 0;
+	out_be16(&wdg->cr, 0);
 #endif
 
-	scm1->mpr = 0x77777777;
-	scm1->pacra = 0;
-	scm1->pacrb = 0;
-	scm1->pacrc = 0;
-	scm1->pacrd = 0;
-	scm1->pacre = 0;
-	scm1->pacrf = 0;
+	out_be32(&scm1->mpr, 0x77777777);
+	out_be32(&scm1->pacra, 0);
+	out_be32(&scm1->pacrb, 0);
+	out_be32(&scm1->pacrc, 0);
+	out_be32(&scm1->pacrd, 0);
+	out_be32(&scm1->pacre, 0);
+	out_be32(&scm1->pacrf, 0);
 
 	/* FlexBus Chipselect */
 	init_fbcs();
@@ -137,36 +138,36 @@
 
 void uart_port_conf(int port)
 {
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
 	switch (port) {
 	case 0:
-		gpio->par_uart &= GPIO_PAR_UART0_UNMASK;
-		gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
+		clrbits_be16(&gpio->par_uart, ~GPIO_PAR_UART0_UNMASK);
+		setbits_be16(&gpio->par_uart, GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
 		break;
 	case 1:
-		gpio->par_uart &= GPIO_PAR_UART0_UNMASK;
-		gpio->par_uart |= (GPIO_PAR_UART_U1TXD | GPIO_PAR_UART_U1RXD);
+		clrbits_be16(&gpio->par_uart, ~GPIO_PAR_UART0_UNMASK);
+		setbits_be16(&gpio->par_uart, GPIO_PAR_UART_U1TXD | GPIO_PAR_UART_U1RXD);
 		break;
 	case 2:
 #ifdef CONFIG_SYS_UART2_PRI_GPIO
-		gpio->par_timer &=
-		    (GPIO_PAR_TMR_TIN0_UNMASK | GPIO_PAR_TMR_TIN1_UNMASK);
-		gpio->par_timer |=
-		    (GPIO_PAR_TMR_TIN0_U2TXD | GPIO_PAR_TMR_TIN1_U2RXD);
+		clrbits_8(&gpio->par_timer,
+			~(GPIO_PAR_TMR_TIN0_UNMASK | GPIO_PAR_TMR_TIN1_UNMASK));
+		setbits_8(&gpio->par_timer,
+			GPIO_PAR_TMR_TIN0_U2TXD | GPIO_PAR_TMR_TIN1_U2RXD);
 #endif
 #ifdef CONFIG_SYS_UART2_ALT1_GPIO
-		gpio->par_feci2c &=
-		    (GPIO_PAR_FECI2C_MDC_UNMASK | GPIO_PAR_FECI2C_MDIO_UNMASK);
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC_U2TXD | GPIO_PAR_FECI2C_MDIO_U2RXD);
+		clrbits_8(&gpio->par_feci2c,
+			~(GPIO_PAR_FECI2C_MDC_UNMASK | GPIO_PAR_FECI2C_MDIO_UNMASK));
+		setbits_8(&gpio->par_feci2c,
+			GPIO_PAR_FECI2C_MDC_U2TXD | GPIO_PAR_FECI2C_MDIO_U2RXD);
 #endif
 #ifdef CONFIG_SYS_UART2_ALT1_GPIO
-		gpio->par_feci2c &=
-		    (GPIO_PAR_FECI2C_SDA_UNMASK | GPIO_PAR_FECI2C_SCL_UNMASK);
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD);
+		clrbits_8(&gpio->par_feci2c,
+			~(GPIO_PAR_FECI2C_SDA_UNMASK | GPIO_PAR_FECI2C_SCL_UNMASK));
+		setbits_8(&gpio->par_feci2c,
+			GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD);
 #endif
 		break;
 	}
@@ -175,17 +176,17 @@
 #if defined(CONFIG_CMD_NET)
 int fecpin_setclear(struct eth_device *dev, int setclear)
 {
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	if (setclear) {
-		gpio->par_fec |=
-		    GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
-		gpio->par_feci2c |=
-		    GPIO_PAR_FECI2C_MDC_MDC | GPIO_PAR_FECI2C_MDIO_MDIO;
+		setbits_8(&gpio->par_fec,
+			GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
+		setbits_8(&gpio->par_feci2c,
+			GPIO_PAR_FECI2C_MDC_MDC | GPIO_PAR_FECI2C_MDIO_MDIO);
 	} else {
-		gpio->par_fec &=
-		    (GPIO_PAR_FEC_7W_UNMASK & GPIO_PAR_FEC_MII_UNMASK);
-		gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII_UNMASK;
+		clrbits_8(&gpio->par_fec,
+			~(GPIO_PAR_FEC_7W_UNMASK & GPIO_PAR_FEC_MII_UNMASK));
+		clrbits_8(&gpio->par_feci2c, ~GPIO_PAR_FECI2C_RMII_UNMASK);
 	}
 	return 0;
 }
@@ -249,17 +250,17 @@
 
 void uart_port_conf(int port)
 {
-	volatile u32 *par = (u32 *) MMAP_PAR;
+	u32 *par = (u32 *) MMAP_PAR;
 
 	/* Setup Ports: */
 	switch (port) {
 	case 1:
-		*par &= 0xFFE7FFFF;
-		*par |= 0x00180000;
+		clrbits_be32(par, 0x00180000);
+		setbits_be32(par, 0x00180000);
 		break;
 	case 2:
-		*par &= 0xFFFFFFFC;
-		*par &= 0x00000003;
+		clrbits_be32(par, 0x00000003);
+		clrbits_be32(par, 0xFFFFFFFC);
 		break;
 	}
 }
@@ -348,59 +349,59 @@
 	 * already initialized.
 	 */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-	volatile sysctrl_t *sysctrl = (sysctrl_t *) (CONFIG_SYS_MBAR);
-	volatile gpio_t *gpio = (gpio_t *) (MMAP_GPIO);
-	volatile csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS);
+	sysctrl_t *sysctrl = (sysctrl_t *) (CONFIG_SYS_MBAR);
+	gpio_t *gpio = (gpio_t *) (MMAP_GPIO);
+	csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS);
 
-	sysctrl->sc_scr = CONFIG_SYS_SCR;
-	sysctrl->sc_spr = CONFIG_SYS_SPR;
+	out_be16(&sysctrl->sc_scr, CONFIG_SYS_SCR);
+	out_be16(&sysctrl->sc_spr, CONFIG_SYS_SPR);
 
 	/* Setup Ports: */
-	gpio->gpio_pacnt = CONFIG_SYS_PACNT;
-	gpio->gpio_paddr = CONFIG_SYS_PADDR;
-	gpio->gpio_padat = CONFIG_SYS_PADAT;
-	gpio->gpio_pbcnt = CONFIG_SYS_PBCNT;
-	gpio->gpio_pbddr = CONFIG_SYS_PBDDR;
-	gpio->gpio_pbdat = CONFIG_SYS_PBDAT;
-	gpio->gpio_pdcnt = CONFIG_SYS_PDCNT;
+	out_be32(&gpio->gpio_pacnt, CONFIG_SYS_PACNT);
+	out_be16(&gpio->gpio_paddr, CONFIG_SYS_PADDR);
+	out_be16(&gpio->gpio_padat, CONFIG_SYS_PADAT);
+	out_be32(&gpio->gpio_pbcnt, CONFIG_SYS_PBCNT);
+	out_be16(&gpio->gpio_pbddr, CONFIG_SYS_PBDDR);
+	out_be16(&gpio->gpio_pbdat, CONFIG_SYS_PBDAT);
+	out_be32(&gpio->gpio_pdcnt, CONFIG_SYS_PDCNT);
 
 	/* Memory Controller: */
-	csctrl->cs_br0 = CONFIG_SYS_BR0_PRELIM;
-	csctrl->cs_or0 = CONFIG_SYS_OR0_PRELIM;
+	out_be32(&csctrl->cs_br0, CONFIG_SYS_BR0_PRELIM);
+	out_be32(&csctrl->cs_or0, CONFIG_SYS_OR0_PRELIM);
 
 #if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
-	csctrl->cs_br1 = CONFIG_SYS_BR1_PRELIM;
-	csctrl->cs_or1 = CONFIG_SYS_OR1_PRELIM;
+	out_be32(&csctrl->cs_br1, CONFIG_SYS_BR1_PRELIM);
+	out_be32(&csctrl->cs_or1, CONFIG_SYS_OR1_PRELIM);
 #endif
 
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
-	csctrl->cs_br2 = CONFIG_SYS_BR2_PRELIM;
-	csctrl->cs_or2 = CONFIG_SYS_OR2_PRELIM;
+	out_be32(&csctrl->cs_br2, CONFIG_SYS_BR2_PRELIM);
+	out_be32(&csctrl->cs_or2, CONFIG_SYS_OR2_PRELIM);
 #endif
 
 #if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
-	csctrl->cs_br3 = CONFIG_SYS_BR3_PRELIM;
-	csctrl->cs_or3 = CONFIG_SYS_OR3_PRELIM;
+	out_be32(&csctrl->cs_br3, CONFIG_SYS_BR3_PRELIM);
+	out_be32(&csctrl->cs_or3, CONFIG_SYS_OR3_PRELIM);
 #endif
 
 #if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
-	csctrl->cs_br4 = CONFIG_SYS_BR4_PRELIM;
-	csctrl->cs_or4 = CONFIG_SYS_OR4_PRELIM;
+	out_be32(&csctrl->cs_br4, CONFIG_SYS_BR4_PRELIM);
+	out_be32(&csctrl->cs_or4, CONFIG_SYS_OR4_PRELIM);
 #endif
 
 #if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
-	csctrl->cs_br5 = CONFIG_SYS_BR5_PRELIM;
-	csctrl->cs_or5 = CONFIG_SYS_OR5_PRELIM;
+	out_be32(&csctrl->cs_br5, CONFIG_SYS_BR5_PRELIM);
+	out_be32(&csctrl->cs_or5, CONFIG_SYS_OR5_PRELIM);
 #endif
 
 #if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
-	csctrl->cs_br6 = CONFIG_SYS_BR6_PRELIM;
-	csctrl->cs_or6 = CONFIG_SYS_OR6_PRELIM;
+	out_be32(&csctrl->cs_br6, CONFIG_SYS_BR6_PRELIM);
+	out_be32(&csctrl->cs_or6, CONFIG_SYS_OR6_PRELIM);
 #endif
 
 #if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
-	csctrl->cs_br7 = CONFIG_SYS_BR7_PRELIM;
-	csctrl->cs_or7 = CONFIG_SYS_OR7_PRELIM;
+	out_be32(&csctrl->cs_br7, CONFIG_SYS_BR7_PRELIM);
+	out_be32(&csctrl->cs_or7, CONFIG_SYS_OR7_PRELIM);
 #endif
 
 #endif				/* #ifndef CONFIG_MONITOR_IS_IN_RAM */
@@ -420,17 +421,21 @@
 
 void uart_port_conf(int port)
 {
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
 	switch (port) {
 	case 0:
-		gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK);
-		gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD);
+		clrbits_be32(&gpio->gpio_pbcnt,
+			GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK);
+		setbits_be32(&gpio->gpio_pbcnt,
+			GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD);
 		break;
 	case 1:
-		gpio->gpio_pdcnt &= ~(GPIO_PDCNT_PD1MSK | GPIO_PDCNT_PD4MSK);
-		gpio->gpio_pdcnt |= (GPIO_PDCNT_URT1_RXD | GPIO_PDCNT_URT1_TXD);
+		clrbits_be32(&gpio->gpio_pdcnt,
+			GPIO_PDCNT_PD1MSK | GPIO_PDCNT_PD4MSK);
+		setbits_be32(&gpio->gpio_pdcnt,
+			GPIO_PDCNT_URT1_RXD | GPIO_PDCNT_URT1_TXD);
 		break;
 	}
 }
@@ -438,13 +443,14 @@
 #if defined(CONFIG_CMD_NET)
 int fecpin_setclear(struct eth_device *dev, int setclear)
 {
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	if (setclear) {
-		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER |
-				    GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 |
-				    GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 |
-				    GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
+		setbits_be32(&gpio->gpio_pbcnt,
+			GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER |
+			GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 |
+			GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 |
+			GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3);
 	} else {
 	}
 	return 0;
@@ -469,11 +475,11 @@
 	 */
 
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-	volatile wdog_t *wdog_reg = (wdog_t *) (MMAP_WDOG);
-	volatile gpio_t *gpio_reg = (gpio_t *) (MMAP_GPIO);
+	wdog_t *wdog_reg = (wdog_t *) (MMAP_WDOG);
+	gpio_t *gpio_reg = (gpio_t *) (MMAP_GPIO);
 
 	/* Kill watchdog so we can initialize the PLL */
-	wdog_reg->wcr = 0;
+	out_be16(&wdog_reg->wcr, 0);
 
 	/* FlexBus Chipselect */
 	init_fbcs();
@@ -498,21 +504,21 @@
 
 void uart_port_conf(int port)
 {
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
 	switch (port) {
 	case 0:
-		gpio->par_uart &= ~UART0_ENABLE_MASK;
-		gpio->par_uart |= UART0_ENABLE_MASK;
+		clrbits_be16(&gpio->par_uart, UART0_ENABLE_MASK);
+		setbits_be16(&gpio->par_uart, UART0_ENABLE_MASK);
 		break;
 	case 1:
-		gpio->par_uart &= ~UART1_ENABLE_MASK;
-		gpio->par_uart |= UART1_ENABLE_MASK;
+		clrbits_be16(&gpio->par_uart, UART1_ENABLE_MASK);
+		setbits_be16(&gpio->par_uart, UART1_ENABLE_MASK);
 		break;
 	case 2:
-		gpio->par_uart &= ~UART2_ENABLE_MASK;
-		gpio->par_uart |= UART2_ENABLE_MASK;
+		clrbits_be16(&gpio->par_uart, UART2_ENABLE_MASK);
+		setbits_be16(&gpio->par_uart, UART2_ENABLE_MASK);
 		break;
 	}
 }
@@ -521,24 +527,24 @@
 int fecpin_setclear(struct eth_device *dev, int setclear)
 {
 	struct fec_info_s *info = (struct fec_info_s *) dev->priv;
-	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
+	gpio_t *gpio = (gpio_t *)MMAP_GPIO;
 
 	if (setclear) {
 		/* Enable Ethernet pins */
 		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
-			gpio->par_feci2c |= 0x0F00;
-			gpio->par_fec0hl |= 0xC0;
+			setbits_be16(&gpio->par_feci2c, 0x0f00);
+			setbits_8(&gpio->par_fec0hl, 0xc0);
 		} else {
-			gpio->par_feci2c |= 0x00A0;
-			gpio->par_fec1hl |= 0xC0;
+			setbits_be16(&gpio->par_feci2c, 0x00a0);
+			setbits_8(&gpio->par_fec1hl, 0xc0);
 		}
 	} else {
 		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
-			gpio->par_feci2c &= ~0x0F00;
-			gpio->par_fec0hl &= ~0xC0;
+			clrbits_be16(&gpio->par_feci2c, 0x0f00);
+			clrbits_8(&gpio->par_fec0hl, 0xc0);
 		} else {
-			gpio->par_feci2c &= ~0x00A0;
-			gpio->par_fec1hl &= ~0xC0;
+			clrbits_be16(&gpio->par_feci2c, 0x00a0);
+			clrbits_8(&gpio->par_fec1hl, 0xc0);
 		}
 	}
 
diff --git a/arch/m68k/cpu/mcf52x2/interrupts.c b/arch/m68k/cpu/mcf52x2/interrupts.c
index dff8c6a..915eb70 100644
--- a/arch/m68k/cpu/mcf52x2/interrupts.c
+++ b/arch/m68k/cpu/mcf52x2/interrupts.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -28,20 +28,22 @@
 #include <watchdog.h>
 #include <asm/processor.h>
 #include <asm/immap.h>
+#include <asm/io.h>
 
 #ifdef	CONFIG_M5272
 int interrupt_init(void)
 {
-	volatile intctrl_t *intp = (intctrl_t *) (MMAP_INTC);
+	intctrl_t *intp = (intctrl_t *) (MMAP_INTC);
 
 	/* disable all external interrupts */
-	intp->int_icr1 = 0x88888888;
-	intp->int_icr2 = 0x88888888;
-	intp->int_icr3 = 0x88888888;
-	intp->int_icr4 = 0x88888888;
-	intp->int_pitr = 0x00000000;
+	out_be32(&intp->int_icr1, 0x88888888);
+	out_be32(&intp->int_icr2, 0x88888888);
+	out_be32(&intp->int_icr3, 0x88888888);
+	out_be32(&intp->int_icr4, 0x88888888);
+	out_be32(&intp->int_pitr, 0x00000000);
+
 	/* initialize vector register */
-	intp->int_pivr = 0x40;
+	out_8(&intp->int_pivr, 0x40);
 
 	enable_interrupts();
 
@@ -51,10 +53,10 @@
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile intctrl_t *intp = (intctrl_t *) (CONFIG_SYS_INTR_BASE);
+	intctrl_t *intp = (intctrl_t *) (CONFIG_SYS_INTR_BASE);
 
-	intp->int_icr1 &= ~INT_ICR1_TMR3MASK;
-	intp->int_icr1 |= CONFIG_SYS_TMRINTR_PRI;
+	clrbits_be32(&intp->int_icr1, INT_ICR1_TMR3MASK);
+	setbits_be32(&intp->int_icr1, CONFIG_SYS_TMRINTR_PRI);
 }
 #endif				/* CONFIG_MCFTMR */
 #endif				/* CONFIG_M5272 */
@@ -63,14 +65,14 @@
     defined(CONFIG_M5271) || defined(CONFIG_M5275)
 int interrupt_init(void)
 {
-	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
+	int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
 	/* Make sure all interrupts are disabled */
 #if defined(CONFIG_M5208)
-	intp->imrl0 = 0xFFFFFFFF;
-	intp->imrh0 = 0xFFFFFFFF;
+	out_be32(&intp->imrl0, 0xffffffff);
+	out_be32(&intp->imrh0, 0xffffffff);
 #else
-	intp->imrl0 |= 0x1;
+	setbits_be32(&intp->imrl0, 0x1);
 #endif
 
 	enable_interrupts();
@@ -80,11 +82,11 @@
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
+	int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
-	intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI;
-	intp->imrl0 &= 0xFFFFFFFE;
-	intp->imrl0 &= ~CONFIG_SYS_TMRINTR_MASK;
+	out_8(&intp->icr0[CONFIG_SYS_TMRINTR_NO], CONFIG_SYS_TMRINTR_PRI);
+	clrbits_be32(&intp->imrl0, 0x00000001);
+	clrbits_be32(&intp->imrl0, CONFIG_SYS_TMRINTR_MASK);
 }
 #endif				/* CONFIG_MCFTMR */
 #endif				/* CONFIG_M5282 | CONFIG_M5271 | CONFIG_M5275 */
diff --git a/arch/m68k/cpu/mcf52x2/speed.c b/arch/m68k/cpu/mcf52x2/speed.c
index b485e1c..70abed2 100644
--- a/arch/m68k/cpu/mcf52x2/speed.c
+++ b/arch/m68k/cpu/mcf52x2/speed.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2003
  * Josef Baumgartner <josef.baumgartner@telex.de>
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
  * Hayden Fraser (Hayden.Fraser@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <asm/processor.h>
 #include <asm/immap.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -34,10 +35,10 @@
 int get_clocks (void)
 {
 #if defined(CONFIG_M5208)
-	volatile pll_t *pll = (pll_t *) MMAP_PLL;
+	pll_t *pll = (pll_t *) MMAP_PLL;
 
-	pll->odr = CONFIG_SYS_PLL_ODR;
-	pll->fdr = CONFIG_SYS_PLL_FDR;
+	out_8(&pll->odr, CONFIG_SYS_PLL_ODR);
+	out_8(&pll->fdr, CONFIG_SYS_PLL_FDR);
 #endif
 
 #if defined(CONFIG_M5249) || defined(CONFIG_M5253)
@@ -70,14 +71,14 @@
 #endif				/* CONFIG_M5249 || CONFIG_M5253 */
 
 #if defined(CONFIG_M5275)
-	volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL);
+	pll_t *pll = (pll_t *)(MMAP_PLL);
 
 	/* Setup PLL */
-	pll->syncr = 0x01080000;
-	while (!(pll->synsr & FMPLL_SYNSR_LOCK))
+	out_be32(&pll->syncr, 0x01080000);
+	while (!(in_be32(&pll->synsr) & FMPLL_SYNSR_LOCK))
 		;
-	pll->syncr = 0x01000000;
-	while (!(pll->synsr & FMPLL_SYNSR_LOCK))
+	out_be32(&pll->syncr, 0x01000000);
+	while (!(in_be32(&pll->synsr) & FMPLL_SYNSR_LOCK))
 		;
 #endif