uec: add support for gbit mii status readings
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index a42701c..8c4a558 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -318,16 +318,26 @@
return err;
if (mii_info->autoneg) {
- status = phy_read (mii_info, PHY_ANLPAR);
+ status = phy_read(mii_info, MII_1000BASETSTATUS);
+
+ if (status & (LPA_1000FULL | LPA_1000HALF)) {
+ mii_info->speed = SPEED_1000;
+ if (status & LPA_1000FULL)
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ } else {
+ status = phy_read(mii_info, PHY_ANLPAR);
- if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
- if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
- mii_info->speed = SPEED_100;
- else
- mii_info->speed = SPEED_10;
+ if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
+ mii_info->speed = SPEED_100;
+ else
+ mii_info->speed = SPEED_10;
+ }
mii_info->pause = 0;
}
/* On non-aneg, we assume what we put in BMCR is the speed,