| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2003 |
| * Kyle Harris, kharris@nexus-tech.net |
| */ |
| |
| #include <common.h> |
| #include <blk.h> |
| #include <command.h> |
| #include <console.h> |
| #include <memalign.h> |
| #include <mmc.h> |
| #include <part.h> |
| #include <sparse_format.h> |
| #include <image-sparse.h> |
| |
| static int curr_device = -1; |
| |
| static void print_mmcinfo(struct mmc *mmc) |
| { |
| int i; |
| |
| printf("Device: %s\n", mmc->cfg->name); |
| printf("Manufacturer ID: %x\n", mmc->cid[0] >> 24); |
| printf("OEM: %x\n", (mmc->cid[0] >> 8) & 0xffff); |
| printf("Name: %c%c%c%c%c \n", mmc->cid[0] & 0xff, |
| (mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff, |
| (mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff); |
| |
| printf("Bus Speed: %d\n", mmc->clock); |
| #if CONFIG_IS_ENABLED(MMC_VERBOSE) |
| printf("Mode: %s\n", mmc_mode_name(mmc->selected_mode)); |
| mmc_dump_capabilities("card capabilities", mmc->card_caps); |
| mmc_dump_capabilities("host capabilities", mmc->host_caps); |
| #endif |
| printf("Rd Block Len: %d\n", mmc->read_bl_len); |
| |
| printf("%s version %d.%d", IS_SD(mmc) ? "SD" : "MMC", |
| EXTRACT_SDMMC_MAJOR_VERSION(mmc->version), |
| EXTRACT_SDMMC_MINOR_VERSION(mmc->version)); |
| if (EXTRACT_SDMMC_CHANGE_VERSION(mmc->version) != 0) |
| printf(".%d", EXTRACT_SDMMC_CHANGE_VERSION(mmc->version)); |
| printf("\n"); |
| |
| printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No"); |
| puts("Capacity: "); |
| print_size(mmc->capacity, "\n"); |
| |
| printf("Bus Width: %d-bit%s\n", mmc->bus_width, |
| mmc->ddr_mode ? " DDR" : ""); |
| |
| #if CONFIG_IS_ENABLED(MMC_WRITE) |
| puts("Erase Group Size: "); |
| print_size(((u64)mmc->erase_grp_size) << 9, "\n"); |
| #endif |
| |
| if (!IS_SD(mmc) && mmc->version >= MMC_VERSION_4_41) { |
| bool has_enh = (mmc->part_support & ENHNCD_SUPPORT) != 0; |
| bool usr_enh = has_enh && (mmc->part_attr & EXT_CSD_ENH_USR); |
| ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN); |
| u8 wp; |
| int ret; |
| |
| #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING) |
| puts("HC WP Group Size: "); |
| print_size(((u64)mmc->hc_wp_grp_size) << 9, "\n"); |
| #endif |
| |
| puts("User Capacity: "); |
| print_size(mmc->capacity_user, usr_enh ? " ENH" : ""); |
| if (mmc->wr_rel_set & EXT_CSD_WR_DATA_REL_USR) |
| puts(" WRREL\n"); |
| else |
| putc('\n'); |
| if (usr_enh) { |
| puts("User Enhanced Start: "); |
| print_size(mmc->enh_user_start, "\n"); |
| puts("User Enhanced Size: "); |
| print_size(mmc->enh_user_size, "\n"); |
| } |
| puts("Boot Capacity: "); |
| print_size(mmc->capacity_boot, has_enh ? " ENH\n" : "\n"); |
| puts("RPMB Capacity: "); |
| print_size(mmc->capacity_rpmb, has_enh ? " ENH\n" : "\n"); |
| |
| for (i = 0; i < ARRAY_SIZE(mmc->capacity_gp); i++) { |
| bool is_enh = has_enh && |
| (mmc->part_attr & EXT_CSD_ENH_GP(i)); |
| if (mmc->capacity_gp[i]) { |
| printf("GP%i Capacity: ", i+1); |
| print_size(mmc->capacity_gp[i], |
| is_enh ? " ENH" : ""); |
| if (mmc->wr_rel_set & EXT_CSD_WR_DATA_REL_GP(i)) |
| puts(" WRREL\n"); |
| else |
| putc('\n'); |
| } |
| } |
| ret = mmc_send_ext_csd(mmc, ext_csd); |
| if (ret) |
| return; |
| wp = ext_csd[EXT_CSD_BOOT_WP_STATUS]; |
| for (i = 0; i < 2; ++i) { |
| printf("Boot area %d is ", i); |
| switch (wp & 3) { |
| case 0: |
| printf("not write protected\n"); |
| break; |
| case 1: |
| printf("power on protected\n"); |
| break; |
| case 2: |
| printf("permanently protected\n"); |
| break; |
| default: |
| printf("in reserved protection state\n"); |
| break; |
| } |
| wp >>= 2; |
| } |
| } |
| } |
| |
| static struct mmc *__init_mmc_device(int dev, bool force_init, |
| enum bus_mode speed_mode) |
| { |
| struct mmc *mmc; |
| mmc = find_mmc_device(dev); |
| if (!mmc) { |
| printf("no mmc device at slot %x\n", dev); |
| return NULL; |
| } |
| |
| if (!mmc_getcd(mmc)) |
| force_init = true; |
| |
| if (force_init) |
| mmc->has_init = 0; |
| |
| if (IS_ENABLED(CONFIG_MMC_SPEED_MODE_SET)) |
| mmc->user_speed_mode = speed_mode; |
| |
| if (mmc_init(mmc)) |
| return NULL; |
| |
| #ifdef CONFIG_BLOCK_CACHE |
| struct blk_desc *bd = mmc_get_blk_desc(mmc); |
| blkcache_invalidate(bd->if_type, bd->devnum); |
| #endif |
| |
| return mmc; |
| } |
| |
| static struct mmc *init_mmc_device(int dev, bool force_init) |
| { |
| return __init_mmc_device(dev, force_init, MMC_MODES_END); |
| } |
| |
| static int do_mmcinfo(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct mmc *mmc; |
| |
| if (curr_device < 0) { |
| if (get_mmc_num() > 0) |
| curr_device = 0; |
| else { |
| puts("No MMC device available\n"); |
| return 1; |
| } |
| } |
| |
| mmc = init_mmc_device(curr_device, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| print_mmcinfo(mmc); |
| return CMD_RET_SUCCESS; |
| } |
| |
| #if CONFIG_IS_ENABLED(CMD_MMC_RPMB) |
| static int confirm_key_prog(void) |
| { |
| puts("Warning: Programming authentication key can be done only once !\n" |
| " Use this command only if you are sure of what you are doing,\n" |
| "Really perform the key programming? <y/N> "); |
| if (confirm_yesno()) |
| return 1; |
| |
| puts("Authentication key programming aborted\n"); |
| return 0; |
| } |
| |
| static int do_mmcrpmb_key(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| void *key_addr; |
| struct mmc *mmc = find_mmc_device(curr_device); |
| |
| if (argc != 2) |
| return CMD_RET_USAGE; |
| |
| key_addr = (void *)hextoul(argv[1], NULL); |
| if (!confirm_key_prog()) |
| return CMD_RET_FAILURE; |
| if (mmc_rpmb_set_key(mmc, key_addr)) { |
| printf("ERROR - Key already programmed ?\n"); |
| return CMD_RET_FAILURE; |
| } |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_mmcrpmb_read(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| u16 blk, cnt; |
| void *addr; |
| int n; |
| void *key_addr = NULL; |
| struct mmc *mmc = find_mmc_device(curr_device); |
| |
| if (argc < 4) |
| return CMD_RET_USAGE; |
| |
| addr = (void *)hextoul(argv[1], NULL); |
| blk = hextoul(argv[2], NULL); |
| cnt = hextoul(argv[3], NULL); |
| |
| if (argc == 5) |
| key_addr = (void *)hextoul(argv[4], NULL); |
| |
| printf("\nMMC RPMB read: dev # %d, block # %d, count %d ... ", |
| curr_device, blk, cnt); |
| n = mmc_rpmb_read(mmc, addr, blk, cnt, key_addr); |
| |
| printf("%d RPMB blocks read: %s\n", n, (n == cnt) ? "OK" : "ERROR"); |
| if (n != cnt) |
| return CMD_RET_FAILURE; |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_mmcrpmb_write(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| u16 blk, cnt; |
| void *addr; |
| int n; |
| void *key_addr; |
| struct mmc *mmc = find_mmc_device(curr_device); |
| |
| if (argc != 5) |
| return CMD_RET_USAGE; |
| |
| addr = (void *)hextoul(argv[1], NULL); |
| blk = hextoul(argv[2], NULL); |
| cnt = hextoul(argv[3], NULL); |
| key_addr = (void *)hextoul(argv[4], NULL); |
| |
| printf("\nMMC RPMB write: dev # %d, block # %d, count %d ... ", |
| curr_device, blk, cnt); |
| n = mmc_rpmb_write(mmc, addr, blk, cnt, key_addr); |
| |
| printf("%d RPMB blocks written: %s\n", n, (n == cnt) ? "OK" : "ERROR"); |
| if (n != cnt) |
| return CMD_RET_FAILURE; |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_mmcrpmb_counter(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| unsigned long counter; |
| struct mmc *mmc = find_mmc_device(curr_device); |
| |
| if (mmc_rpmb_get_counter(mmc, &counter)) |
| return CMD_RET_FAILURE; |
| printf("RPMB Write counter= %lx\n", counter); |
| return CMD_RET_SUCCESS; |
| } |
| |
| static struct cmd_tbl cmd_rpmb[] = { |
| U_BOOT_CMD_MKENT(key, 2, 0, do_mmcrpmb_key, "", ""), |
| U_BOOT_CMD_MKENT(read, 5, 1, do_mmcrpmb_read, "", ""), |
| U_BOOT_CMD_MKENT(write, 5, 0, do_mmcrpmb_write, "", ""), |
| U_BOOT_CMD_MKENT(counter, 1, 1, do_mmcrpmb_counter, "", ""), |
| }; |
| |
| static int do_mmcrpmb(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| struct cmd_tbl *cp; |
| struct mmc *mmc; |
| char original_part; |
| int ret; |
| |
| cp = find_cmd_tbl(argv[1], cmd_rpmb, ARRAY_SIZE(cmd_rpmb)); |
| |
| /* Drop the rpmb subcommand */ |
| argc--; |
| argv++; |
| |
| if (cp == NULL || argc > cp->maxargs) |
| return CMD_RET_USAGE; |
| if (flag == CMD_FLAG_REPEAT && !cmd_is_repeatable(cp)) |
| return CMD_RET_SUCCESS; |
| |
| mmc = init_mmc_device(curr_device, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| if (!(mmc->version & MMC_VERSION_MMC)) { |
| printf("It is not an eMMC device\n"); |
| return CMD_RET_FAILURE; |
| } |
| if (mmc->version < MMC_VERSION_4_41) { |
| printf("RPMB not supported before version 4.41\n"); |
| return CMD_RET_FAILURE; |
| } |
| /* Switch to the RPMB partition */ |
| #ifndef CONFIG_BLK |
| original_part = mmc->block_dev.hwpart; |
| #else |
| original_part = mmc_get_blk_desc(mmc)->hwpart; |
| #endif |
| if (blk_select_hwpart_devnum(IF_TYPE_MMC, curr_device, MMC_PART_RPMB) != |
| 0) |
| return CMD_RET_FAILURE; |
| ret = cp->cmd(cmdtp, flag, argc, argv); |
| |
| /* Return to original partition */ |
| if (blk_select_hwpart_devnum(IF_TYPE_MMC, curr_device, original_part) != |
| 0) |
| return CMD_RET_FAILURE; |
| return ret; |
| } |
| #endif |
| |
| static int do_mmc_read(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| struct mmc *mmc; |
| u32 blk, cnt, n; |
| void *addr; |
| |
| if (argc != 4) |
| return CMD_RET_USAGE; |
| |
| addr = (void *)hextoul(argv[1], NULL); |
| blk = hextoul(argv[2], NULL); |
| cnt = hextoul(argv[3], NULL); |
| |
| mmc = init_mmc_device(curr_device, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| printf("\nMMC read: dev # %d, block # %d, count %d ... ", |
| curr_device, blk, cnt); |
| |
| n = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr); |
| printf("%d blocks read: %s\n", n, (n == cnt) ? "OK" : "ERROR"); |
| |
| return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE; |
| } |
| |
| #if CONFIG_IS_ENABLED(CMD_MMC_SWRITE) |
| static lbaint_t mmc_sparse_write(struct sparse_storage *info, lbaint_t blk, |
| lbaint_t blkcnt, const void *buffer) |
| { |
| struct blk_desc *dev_desc = info->priv; |
| |
| return blk_dwrite(dev_desc, blk, blkcnt, buffer); |
| } |
| |
| static lbaint_t mmc_sparse_reserve(struct sparse_storage *info, |
| lbaint_t blk, lbaint_t blkcnt) |
| { |
| return blkcnt; |
| } |
| |
| static int do_mmc_sparse_write(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| struct sparse_storage sparse; |
| struct blk_desc *dev_desc; |
| struct mmc *mmc; |
| char dest[11]; |
| void *addr; |
| u32 blk; |
| |
| if (argc != 3) |
| return CMD_RET_USAGE; |
| |
| addr = (void *)hextoul(argv[1], NULL); |
| blk = hextoul(argv[2], NULL); |
| |
| if (!is_sparse_image(addr)) { |
| printf("Not a sparse image\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| mmc = init_mmc_device(curr_device, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| printf("\nMMC Sparse write: dev # %d, block # %d ... ", |
| curr_device, blk); |
| |
| if (mmc_getwp(mmc) == 1) { |
| printf("Error: card is write protected!\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| dev_desc = mmc_get_blk_desc(mmc); |
| sparse.priv = dev_desc; |
| sparse.blksz = 512; |
| sparse.start = blk; |
| sparse.size = dev_desc->lba - blk; |
| sparse.write = mmc_sparse_write; |
| sparse.reserve = mmc_sparse_reserve; |
| sparse.mssg = NULL; |
| sprintf(dest, "0x" LBAF, sparse.start * sparse.blksz); |
| |
| if (write_sparse_image(&sparse, dest, addr, NULL)) |
| return CMD_RET_FAILURE; |
| else |
| return CMD_RET_SUCCESS; |
| } |
| #endif |
| |
| #if CONFIG_IS_ENABLED(MMC_WRITE) |
| static int do_mmc_write(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| struct mmc *mmc; |
| u32 blk, cnt, n; |
| void *addr; |
| |
| if (argc != 4) |
| return CMD_RET_USAGE; |
| |
| addr = (void *)hextoul(argv[1], NULL); |
| blk = hextoul(argv[2], NULL); |
| cnt = hextoul(argv[3], NULL); |
| |
| mmc = init_mmc_device(curr_device, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| printf("\nMMC write: dev # %d, block # %d, count %d ... ", |
| curr_device, blk, cnt); |
| |
| if (mmc_getwp(mmc) == 1) { |
| printf("Error: card is write protected!\n"); |
| return CMD_RET_FAILURE; |
| } |
| n = blk_dwrite(mmc_get_blk_desc(mmc), blk, cnt, addr); |
| printf("%d blocks written: %s\n", n, (n == cnt) ? "OK" : "ERROR"); |
| |
| return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE; |
| } |
| |
| static int do_mmc_erase(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| struct mmc *mmc; |
| u32 blk, cnt, n; |
| |
| if (argc != 3) |
| return CMD_RET_USAGE; |
| |
| blk = hextoul(argv[1], NULL); |
| cnt = hextoul(argv[2], NULL); |
| |
| mmc = init_mmc_device(curr_device, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| printf("\nMMC erase: dev # %d, block # %d, count %d ... ", |
| curr_device, blk, cnt); |
| |
| if (mmc_getwp(mmc) == 1) { |
| printf("Error: card is write protected!\n"); |
| return CMD_RET_FAILURE; |
| } |
| n = blk_derase(mmc_get_blk_desc(mmc), blk, cnt); |
| printf("%d blocks erased: %s\n", n, (n == cnt) ? "OK" : "ERROR"); |
| |
| return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE; |
| } |
| #endif |
| |
| static int do_mmc_rescan(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| struct mmc *mmc; |
| enum bus_mode speed_mode = MMC_MODES_END; |
| |
| if (argc == 1) { |
| mmc = init_mmc_device(curr_device, true); |
| } else if (argc == 2) { |
| speed_mode = (int)dectoul(argv[1], NULL); |
| mmc = __init_mmc_device(curr_device, true, speed_mode); |
| } else { |
| return CMD_RET_USAGE; |
| } |
| |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_mmc_part(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| struct blk_desc *mmc_dev; |
| struct mmc *mmc; |
| |
| mmc = init_mmc_device(curr_device, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| mmc_dev = blk_get_devnum_by_type(IF_TYPE_MMC, curr_device); |
| if (mmc_dev != NULL && mmc_dev->type != DEV_TYPE_UNKNOWN) { |
| part_print(mmc_dev); |
| return CMD_RET_SUCCESS; |
| } |
| |
| puts("get mmc type error!\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| static int do_mmc_dev(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| int dev, part = 0, ret; |
| struct mmc *mmc; |
| enum bus_mode speed_mode = MMC_MODES_END; |
| |
| if (argc == 1) { |
| dev = curr_device; |
| mmc = init_mmc_device(dev, true); |
| } else if (argc == 2) { |
| dev = (int)dectoul(argv[1], NULL); |
| mmc = init_mmc_device(dev, true); |
| } else if (argc == 3) { |
| dev = (int)dectoul(argv[1], NULL); |
| part = (int)dectoul(argv[2], NULL); |
| if (part > PART_ACCESS_MASK) { |
| printf("#part_num shouldn't be larger than %d\n", |
| PART_ACCESS_MASK); |
| return CMD_RET_FAILURE; |
| } |
| mmc = init_mmc_device(dev, true); |
| } else if (argc == 4) { |
| dev = (int)dectoul(argv[1], NULL); |
| part = (int)dectoul(argv[2], NULL); |
| if (part > PART_ACCESS_MASK) { |
| printf("#part_num shouldn't be larger than %d\n", |
| PART_ACCESS_MASK); |
| return CMD_RET_FAILURE; |
| } |
| speed_mode = (int)dectoul(argv[3], NULL); |
| mmc = __init_mmc_device(dev, true, speed_mode); |
| } else { |
| return CMD_RET_USAGE; |
| } |
| |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| ret = blk_select_hwpart_devnum(IF_TYPE_MMC, dev, part); |
| printf("switch to partitions #%d, %s\n", |
| part, (!ret) ? "OK" : "ERROR"); |
| if (ret) |
| return 1; |
| |
| curr_device = dev; |
| if (mmc->part_config == MMCPART_NOAVAILABLE) |
| printf("mmc%d is current device\n", curr_device); |
| else |
| printf("mmc%d(part %d) is current device\n", |
| curr_device, mmc_get_blk_desc(mmc)->hwpart); |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_mmc_list(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| print_mmc_devices('\n'); |
| return CMD_RET_SUCCESS; |
| } |
| |
| #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING) |
| static void parse_hwpart_user_enh_size(struct mmc *mmc, |
| struct mmc_hwpart_conf *pconf, |
| char *argv) |
| { |
| int ret; |
| |
| pconf->user.enh_size = 0; |
| |
| if (!strcmp(argv, "-")) { /* The rest of eMMC */ |
| ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN); |
| ret = mmc_send_ext_csd(mmc, ext_csd); |
| if (ret) |
| return; |
| /* This value is in 512B block units */ |
| pconf->user.enh_size = |
| ((ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT + 2] << 16) + |
| (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT + 1] << 8) + |
| ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT]) * 1024 * |
| ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * |
| ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; |
| pconf->user.enh_size -= pconf->user.enh_start; |
| } else { |
| pconf->user.enh_size = dectoul(argv, NULL); |
| } |
| } |
| |
| static int parse_hwpart_user(struct mmc *mmc, struct mmc_hwpart_conf *pconf, |
| int argc, char *const argv[]) |
| { |
| int i = 0; |
| |
| memset(&pconf->user, 0, sizeof(pconf->user)); |
| |
| while (i < argc) { |
| if (!strcmp(argv[i], "enh")) { |
| if (i + 2 >= argc) |
| return -1; |
| pconf->user.enh_start = |
| dectoul(argv[i + 1], NULL); |
| parse_hwpart_user_enh_size(mmc, pconf, argv[i + 2]); |
| i += 3; |
| } else if (!strcmp(argv[i], "wrrel")) { |
| if (i + 1 >= argc) |
| return -1; |
| pconf->user.wr_rel_change = 1; |
| if (!strcmp(argv[i+1], "on")) |
| pconf->user.wr_rel_set = 1; |
| else if (!strcmp(argv[i+1], "off")) |
| pconf->user.wr_rel_set = 0; |
| else |
| return -1; |
| i += 2; |
| } else { |
| break; |
| } |
| } |
| return i; |
| } |
| |
| static int parse_hwpart_gp(struct mmc_hwpart_conf *pconf, int pidx, |
| int argc, char *const argv[]) |
| { |
| int i; |
| |
| memset(&pconf->gp_part[pidx], 0, sizeof(pconf->gp_part[pidx])); |
| |
| if (1 >= argc) |
| return -1; |
| pconf->gp_part[pidx].size = dectoul(argv[0], NULL); |
| |
| i = 1; |
| while (i < argc) { |
| if (!strcmp(argv[i], "enh")) { |
| pconf->gp_part[pidx].enhanced = 1; |
| i += 1; |
| } else if (!strcmp(argv[i], "wrrel")) { |
| if (i + 1 >= argc) |
| return -1; |
| pconf->gp_part[pidx].wr_rel_change = 1; |
| if (!strcmp(argv[i+1], "on")) |
| pconf->gp_part[pidx].wr_rel_set = 1; |
| else if (!strcmp(argv[i+1], "off")) |
| pconf->gp_part[pidx].wr_rel_set = 0; |
| else |
| return -1; |
| i += 2; |
| } else { |
| break; |
| } |
| } |
| return i; |
| } |
| |
| static int do_mmc_hwpartition(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| struct mmc *mmc; |
| struct mmc_hwpart_conf pconf = { }; |
| enum mmc_hwpart_conf_mode mode = MMC_HWPART_CONF_CHECK; |
| int i, r, pidx; |
| |
| mmc = init_mmc_device(curr_device, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| if (argc < 1) |
| return CMD_RET_USAGE; |
| i = 1; |
| while (i < argc) { |
| if (!strcmp(argv[i], "user")) { |
| i++; |
| r = parse_hwpart_user(mmc, &pconf, argc - i, &argv[i]); |
| if (r < 0) |
| return CMD_RET_USAGE; |
| i += r; |
| } else if (!strncmp(argv[i], "gp", 2) && |
| strlen(argv[i]) == 3 && |
| argv[i][2] >= '1' && argv[i][2] <= '4') { |
| pidx = argv[i][2] - '1'; |
| i++; |
| r = parse_hwpart_gp(&pconf, pidx, argc-i, &argv[i]); |
| if (r < 0) |
| return CMD_RET_USAGE; |
| i += r; |
| } else if (!strcmp(argv[i], "check")) { |
| mode = MMC_HWPART_CONF_CHECK; |
| i++; |
| } else if (!strcmp(argv[i], "set")) { |
| mode = MMC_HWPART_CONF_SET; |
| i++; |
| } else if (!strcmp(argv[i], "complete")) { |
| mode = MMC_HWPART_CONF_COMPLETE; |
| i++; |
| } else { |
| return CMD_RET_USAGE; |
| } |
| } |
| |
| puts("Partition configuration:\n"); |
| if (pconf.user.enh_size) { |
| puts("\tUser Enhanced Start: "); |
| print_size(((u64)pconf.user.enh_start) << 9, "\n"); |
| puts("\tUser Enhanced Size: "); |
| print_size(((u64)pconf.user.enh_size) << 9, "\n"); |
| } else { |
| puts("\tNo enhanced user data area\n"); |
| } |
| if (pconf.user.wr_rel_change) |
| printf("\tUser partition write reliability: %s\n", |
| pconf.user.wr_rel_set ? "on" : "off"); |
| for (pidx = 0; pidx < 4; pidx++) { |
| if (pconf.gp_part[pidx].size) { |
| printf("\tGP%i Capacity: ", pidx+1); |
| print_size(((u64)pconf.gp_part[pidx].size) << 9, |
| pconf.gp_part[pidx].enhanced ? |
| " ENH\n" : "\n"); |
| } else { |
| printf("\tNo GP%i partition\n", pidx+1); |
| } |
| if (pconf.gp_part[pidx].wr_rel_change) |
| printf("\tGP%i write reliability: %s\n", pidx+1, |
| pconf.gp_part[pidx].wr_rel_set ? "on" : "off"); |
| } |
| |
| if (!mmc_hwpart_config(mmc, &pconf, mode)) { |
| if (mode == MMC_HWPART_CONF_COMPLETE) |
| puts("Partitioning successful, " |
| "power-cycle to make effective\n"); |
| return CMD_RET_SUCCESS; |
| } else { |
| puts("Failed!\n"); |
| return CMD_RET_FAILURE; |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_SUPPORT_EMMC_BOOT |
| static int do_mmc_bootbus(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| int dev; |
| struct mmc *mmc; |
| u8 width, reset, mode; |
| |
| if (argc != 5) |
| return CMD_RET_USAGE; |
| dev = dectoul(argv[1], NULL); |
| width = dectoul(argv[2], NULL); |
| reset = dectoul(argv[3], NULL); |
| mode = dectoul(argv[4], NULL); |
| |
| mmc = init_mmc_device(dev, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| if (IS_SD(mmc)) { |
| puts("BOOT_BUS_WIDTH only exists on eMMC\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| /* |
| * BOOT_BUS_CONDITIONS[177] |
| * BOOT_MODE[4:3] |
| * 0x0 : Use SDR + Backward compatible timing in boot operation |
| * 0x1 : Use SDR + High Speed Timing in boot operation mode |
| * 0x2 : Use DDR in boot operation |
| * RESET_BOOT_BUS_CONDITIONS |
| * 0x0 : Reset bus width to x1, SDR, Backward compatible |
| * 0x1 : Retain BOOT_BUS_WIDTH and BOOT_MODE |
| * BOOT_BUS_WIDTH |
| * 0x0 : x1(sdr) or x4 (ddr) buswidth |
| * 0x1 : x4(sdr/ddr) buswith |
| * 0x2 : x8(sdr/ddr) buswith |
| * |
| */ |
| if (width >= 0x3) { |
| printf("boot_bus_width %d is invalid\n", width); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (reset >= 0x2) { |
| printf("reset_boot_bus_width %d is invalid\n", reset); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (mode >= 0x3) { |
| printf("reset_boot_bus_width %d is invalid\n", mode); |
| return CMD_RET_FAILURE; |
| } |
| |
| /* acknowledge to be sent during boot operation */ |
| if (mmc_set_boot_bus_width(mmc, width, reset, mode)) { |
| puts("BOOT_BUS_WIDTH is failed to change.\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| printf("Set to BOOT_BUS_WIDTH = 0x%x, RESET = 0x%x, BOOT_MODE = 0x%x\n", |
| width, reset, mode); |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_mmc_boot_resize(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| int dev; |
| struct mmc *mmc; |
| u32 bootsize, rpmbsize; |
| |
| if (argc != 4) |
| return CMD_RET_USAGE; |
| dev = dectoul(argv[1], NULL); |
| bootsize = dectoul(argv[2], NULL); |
| rpmbsize = dectoul(argv[3], NULL); |
| |
| mmc = init_mmc_device(dev, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| if (IS_SD(mmc)) { |
| printf("It is not an eMMC device\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (mmc_boot_partition_size_change(mmc, bootsize, rpmbsize)) { |
| printf("EMMC boot partition Size change Failed.\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| printf("EMMC boot partition Size %d MB\n", bootsize); |
| printf("EMMC RPMB partition Size %d MB\n", rpmbsize); |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int mmc_partconf_print(struct mmc *mmc, const char *varname) |
| { |
| u8 ack, access, part; |
| |
| if (mmc->part_config == MMCPART_NOAVAILABLE) { |
| printf("No part_config info for ver. 0x%x\n", mmc->version); |
| return CMD_RET_FAILURE; |
| } |
| |
| access = EXT_CSD_EXTRACT_PARTITION_ACCESS(mmc->part_config); |
| ack = EXT_CSD_EXTRACT_BOOT_ACK(mmc->part_config); |
| part = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config); |
| |
| if(varname) |
| env_set_hex(varname, part); |
| |
| printf("EXT_CSD[179], PARTITION_CONFIG:\n" |
| "BOOT_ACK: 0x%x\n" |
| "BOOT_PARTITION_ENABLE: 0x%x\n" |
| "PARTITION_ACCESS: 0x%x\n", ack, part, access); |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int do_mmc_partconf(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| int dev; |
| struct mmc *mmc; |
| u8 ack, part_num, access; |
| |
| if (argc != 2 && argc != 3 && argc != 5) |
| return CMD_RET_USAGE; |
| |
| dev = dectoul(argv[1], NULL); |
| |
| mmc = init_mmc_device(dev, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| if (IS_SD(mmc)) { |
| puts("PARTITION_CONFIG only exists on eMMC\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (argc == 2 || argc == 3) |
| return mmc_partconf_print(mmc, argc == 3 ? argv[2] : NULL); |
| |
| ack = dectoul(argv[2], NULL); |
| part_num = dectoul(argv[3], NULL); |
| access = dectoul(argv[4], NULL); |
| |
| /* acknowledge to be sent during boot operation */ |
| return mmc_set_part_conf(mmc, ack, part_num, access); |
| } |
| |
| static int do_mmc_rst_func(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| int dev; |
| struct mmc *mmc; |
| u8 enable; |
| |
| /* |
| * Set the RST_n_ENABLE bit of RST_n_FUNCTION |
| * The only valid values are 0x0, 0x1 and 0x2 and writing |
| * a value of 0x1 or 0x2 sets the value permanently. |
| */ |
| if (argc != 3) |
| return CMD_RET_USAGE; |
| |
| dev = dectoul(argv[1], NULL); |
| enable = dectoul(argv[2], NULL); |
| |
| if (enable > 2) { |
| puts("Invalid RST_n_ENABLE value\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| mmc = init_mmc_device(dev, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| if (IS_SD(mmc)) { |
| puts("RST_n_FUNCTION only exists on eMMC\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| return mmc_set_rst_n_function(mmc, enable); |
| } |
| #endif |
| static int do_mmc_setdsr(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| struct mmc *mmc; |
| u32 val; |
| int ret; |
| |
| if (argc != 2) |
| return CMD_RET_USAGE; |
| val = hextoul(argv[1], NULL); |
| |
| mmc = find_mmc_device(curr_device); |
| if (!mmc) { |
| printf("no mmc device at slot %x\n", curr_device); |
| return CMD_RET_FAILURE; |
| } |
| ret = mmc_set_dsr(mmc, val); |
| printf("set dsr %s\n", (!ret) ? "OK, force rescan" : "ERROR"); |
| if (!ret) { |
| mmc->has_init = 0; |
| if (mmc_init(mmc)) |
| return CMD_RET_FAILURE; |
| else |
| return CMD_RET_SUCCESS; |
| } |
| return ret; |
| } |
| |
| #ifdef CONFIG_CMD_BKOPS_ENABLE |
| static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag, |
| int argc, char *const argv[]) |
| { |
| int dev; |
| struct mmc *mmc; |
| |
| if (argc != 2) |
| return CMD_RET_USAGE; |
| |
| dev = dectoul(argv[1], NULL); |
| |
| mmc = init_mmc_device(dev, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| |
| if (IS_SD(mmc)) { |
| puts("BKOPS_EN only exists on eMMC\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| return mmc_set_bkops_enable(mmc); |
| } |
| #endif |
| |
| static int do_mmc_boot_wp(struct cmd_tbl *cmdtp, int flag, |
| int argc, char * const argv[]) |
| { |
| int err; |
| struct mmc *mmc; |
| |
| mmc = init_mmc_device(curr_device, false); |
| if (!mmc) |
| return CMD_RET_FAILURE; |
| if (IS_SD(mmc)) { |
| printf("It is not an eMMC device\n"); |
| return CMD_RET_FAILURE; |
| } |
| err = mmc_boot_wp(mmc); |
| if (err) |
| return CMD_RET_FAILURE; |
| printf("boot areas protected\n"); |
| return CMD_RET_SUCCESS; |
| } |
| |
| static struct cmd_tbl cmd_mmc[] = { |
| U_BOOT_CMD_MKENT(info, 1, 0, do_mmcinfo, "", ""), |
| U_BOOT_CMD_MKENT(read, 4, 1, do_mmc_read, "", ""), |
| U_BOOT_CMD_MKENT(wp, 1, 0, do_mmc_boot_wp, "", ""), |
| #if CONFIG_IS_ENABLED(MMC_WRITE) |
| U_BOOT_CMD_MKENT(write, 4, 0, do_mmc_write, "", ""), |
| U_BOOT_CMD_MKENT(erase, 3, 0, do_mmc_erase, "", ""), |
| #endif |
| #if CONFIG_IS_ENABLED(CMD_MMC_SWRITE) |
| U_BOOT_CMD_MKENT(swrite, 3, 0, do_mmc_sparse_write, "", ""), |
| #endif |
| U_BOOT_CMD_MKENT(rescan, 2, 1, do_mmc_rescan, "", ""), |
| U_BOOT_CMD_MKENT(part, 1, 1, do_mmc_part, "", ""), |
| U_BOOT_CMD_MKENT(dev, 4, 0, do_mmc_dev, "", ""), |
| U_BOOT_CMD_MKENT(list, 1, 1, do_mmc_list, "", ""), |
| #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING) |
| U_BOOT_CMD_MKENT(hwpartition, 28, 0, do_mmc_hwpartition, "", ""), |
| #endif |
| #ifdef CONFIG_SUPPORT_EMMC_BOOT |
| U_BOOT_CMD_MKENT(bootbus, 5, 0, do_mmc_bootbus, "", ""), |
| U_BOOT_CMD_MKENT(bootpart-resize, 4, 0, do_mmc_boot_resize, "", ""), |
| U_BOOT_CMD_MKENT(partconf, 5, 0, do_mmc_partconf, "", ""), |
| U_BOOT_CMD_MKENT(rst-function, 3, 0, do_mmc_rst_func, "", ""), |
| #endif |
| #if CONFIG_IS_ENABLED(CMD_MMC_RPMB) |
| U_BOOT_CMD_MKENT(rpmb, CONFIG_SYS_MAXARGS, 1, do_mmcrpmb, "", ""), |
| #endif |
| U_BOOT_CMD_MKENT(setdsr, 2, 0, do_mmc_setdsr, "", ""), |
| #ifdef CONFIG_CMD_BKOPS_ENABLE |
| U_BOOT_CMD_MKENT(bkops-enable, 2, 0, do_mmc_bkops_enable, "", ""), |
| #endif |
| }; |
| |
| static int do_mmcops(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct cmd_tbl *cp; |
| |
| cp = find_cmd_tbl(argv[1], cmd_mmc, ARRAY_SIZE(cmd_mmc)); |
| |
| /* Drop the mmc command */ |
| argc--; |
| argv++; |
| |
| if (cp == NULL || argc > cp->maxargs) |
| return CMD_RET_USAGE; |
| if (flag == CMD_FLAG_REPEAT && !cmd_is_repeatable(cp)) |
| return CMD_RET_SUCCESS; |
| |
| if (curr_device < 0) { |
| if (get_mmc_num() > 0) { |
| curr_device = 0; |
| } else { |
| puts("No MMC device available\n"); |
| return CMD_RET_FAILURE; |
| } |
| } |
| return cp->cmd(cmdtp, flag, argc, argv); |
| } |
| |
| U_BOOT_CMD( |
| mmc, 29, 1, do_mmcops, |
| "MMC sub system", |
| "info - display info of the current MMC device\n" |
| "mmc read addr blk# cnt\n" |
| "mmc write addr blk# cnt\n" |
| #if CONFIG_IS_ENABLED(CMD_MMC_SWRITE) |
| "mmc swrite addr blk#\n" |
| #endif |
| "mmc erase blk# cnt\n" |
| "mmc rescan [mode]\n" |
| "mmc part - lists available partition on current mmc device\n" |
| "mmc dev [dev] [part] [mode] - show or set current mmc device [partition] and set mode\n" |
| " - the required speed mode is passed as the index from the following list\n" |
| " [MMC_LEGACY, MMC_HS, SD_HS, MMC_HS_52, MMC_DDR_52, UHS_SDR12, UHS_SDR25,\n" |
| " UHS_SDR50, UHS_DDR50, UHS_SDR104, MMC_HS_200, MMC_HS_400, MMC_HS_400_ES]\n" |
| "mmc list - lists available devices\n" |
| "mmc wp - power on write protect boot partitions\n" |
| #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING) |
| "mmc hwpartition <USER> <GP> <MODE> - does hardware partitioning\n" |
| " arguments (sizes in 512-byte blocks):\n" |
| " USER - <user> <enh> <start> <cnt> <wrrel> <{on|off}>\n" |
| " : sets user data area attributes\n" |
| " GP - <{gp1|gp2|gp3|gp4}> <cnt> <enh> <wrrel> <{on|off}>\n" |
| " : general purpose partition\n" |
| " MODE - <{check|set|complete}>\n" |
| " : mode, complete set partitioning completed\n" |
| " WARNING: Partitioning is a write-once setting once it is set to complete.\n" |
| " Power cycling is required to initialize partitions after set to complete.\n" |
| #endif |
| #ifdef CONFIG_SUPPORT_EMMC_BOOT |
| "mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode>\n" |
| " - Set the BOOT_BUS_WIDTH field of the specified device\n" |
| "mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n" |
| " - Change sizes of boot and RPMB partitions of specified device\n" |
| "mmc partconf <dev> [[varname] | [<boot_ack> <boot_partition> <partition_access>]]\n" |
| " - Show or change the bits of the PARTITION_CONFIG field of the specified device\n" |
| " If showing the bits, optionally store the boot_partition field into varname\n" |
| "mmc rst-function <dev> <value>\n" |
| " - Change the RST_n_FUNCTION field of the specified device\n" |
| " WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values.\n" |
| #endif |
| #if CONFIG_IS_ENABLED(CMD_MMC_RPMB) |
| "mmc rpmb read addr blk# cnt [address of auth-key] - block size is 256 bytes\n" |
| "mmc rpmb write addr blk# cnt <address of auth-key> - block size is 256 bytes\n" |
| "mmc rpmb key <address of auth-key> - program the RPMB authentication key.\n" |
| "mmc rpmb counter - read the value of the write counter\n" |
| #endif |
| "mmc setdsr <value> - set DSR register value\n" |
| #ifdef CONFIG_CMD_BKOPS_ENABLE |
| "mmc bkops-enable <dev> - enable background operations handshake on device\n" |
| " WARNING: This is a write-once setting.\n" |
| #endif |
| ); |
| |
| /* Old command kept for compatibility. Same as 'mmc info' */ |
| U_BOOT_CMD( |
| mmcinfo, 1, 0, do_mmcinfo, |
| "display MMC info", |
| "- display info of the current MMC device" |
| ); |