diff --git a/drivers/power/regulator/axp_regulator.c b/drivers/power/regulator/axp_regulator.c
index 02f320e..d27e095 100644
--- a/drivers/power/regulator/axp_regulator.c
+++ b/drivers/power/regulator/axp_regulator.c
@@ -173,6 +173,22 @@
 	{ }
 };
 
+/*
+ * The "dcdc1" regulator has another range, beyond 1.54V up to 3.4V, in
+ * steps of 100mV. We cannot model this easily, but also don't need that,
+ * since it's typically only used for ~1.1V anyway, so just ignore it.
+ * Also the DCDC3 regulator is described wrongly in the (available) manual,
+ * experiments show that the split point is at 1200mV, as for DCDC1/2.
+ */
+static const struct axp_regulator_plat axp313_regulators[] = {
+	{ "dcdc1", 0x10, BIT(0), 0x13, 0x7f,  500, 1540,  10, 70 },
+	{ "dcdc2", 0x10, BIT(1), 0x14, 0x7f,  500, 1540,  10, 70 },
+	{ "dcdc3", 0x10, BIT(2), 0x15, 0x7f,  500, 1840,  10, 70 },
+	{ "aldo1", 0x10, BIT(3), 0x16, 0x1f,  500, 3500, 100, NA },
+	{ "dldo1", 0x10, BIT(4), 0x17, 0x1f,  500, 3500, 100, NA },
+	{ }
+};
+
 static const struct axp_regulator_plat axp803_regulators[] = {
 	{ "dcdc1", 0x10, BIT(0), 0x20, 0x1f, 1600, 3400, 100, NA },
 	{ "dcdc2", 0x10, BIT(1), 0x21, 0x7f,  500, 1300,  10, 70 },
@@ -274,6 +290,7 @@
 	[AXP209_ID]	= axp20x_regulators,
 	[AXP221_ID]	= axp22x_regulators,
 	[AXP223_ID]	= axp22x_regulators,
+	[AXP313_ID]	= axp313_regulators,
 	[AXP803_ID]	= axp803_regulators,
 	[AXP806_ID]	= axp806_regulators,
 	[AXP809_ID]	= axp809_regulators,