ram: stm32mp1: add driver
Add driver and binding for stm32mp1 ddr controller and phy
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/doc/device-tree-bindings/ram/st,stm32mp1-ddr.txt b/doc/device-tree-bindings/ram/st,stm32mp1-ddr.txt
new file mode 100644
index 0000000..3028636
--- /dev/null
+++ b/doc/device-tree-bindings/ram/st,stm32mp1-ddr.txt
@@ -0,0 +1,299 @@
+ST,stm32mp1 DDR3/LPDDR2/LPDDR3 Controller (DDRCTRL and DDRPHYC)
+
+--------------------
+Required properties:
+--------------------
+- compatible : Should be "st,stm32mp1-ddr"
+- reg : controleur (DDRCTRL) and phy (DDRPHYC) base address
+- clocks : controller clocks handle
+- clock-names : associated controller clock names
+ the "ddrphyc" clock is used to check the DDR frequency
+ at phy level according the expected value in "mem-speed" field
+
+the next attributes are DDR parameters, they are generated by DDR tools
+included in STM32 Cube tool
+
+info attributes:
+----------------
+- st,mem-name : name for DDR configuration, simple string for information
+- st,mem-speed : DDR expected speed for the setting in MHz
+- st,mem-size : DDR mem size in byte
+
+
+controlleur attributes:
+-----------------------
+- st,ctl-reg : controleur values depending of the DDR type
+ (DDR3/LPDDR2/LPDDR3)
+ for STM32MP15x: 25 values are requested in this order
+ MSTR
+ MRCTRL0
+ MRCTRL1
+ DERATEEN
+ DERATEINT
+ PWRCTL
+ PWRTMG
+ HWLPCTL
+ RFSHCTL0
+ RFSHCTL3
+ CRCPARCTL0
+ ZQCTL0
+ DFITMG0
+ DFITMG1
+ DFILPCFG0
+ DFIUPD0
+ DFIUPD1
+ DFIUPD2
+ DFIPHYMSTR
+ ODTMAP
+ DBG0
+ DBG1
+ DBGCMD
+ POISONCFG
+ PCCFG
+
+- st,ctl-timing : controleur values depending of frequency and timing parameter
+ of DDR
+ for STM32MP15x: 12 values are requested in this order
+ RFSHTMG
+ DRAMTMG0
+ DRAMTMG1
+ DRAMTMG2
+ DRAMTMG3
+ DRAMTMG4
+ DRAMTMG5
+ DRAMTMG6
+ DRAMTMG7
+ DRAMTMG8
+ DRAMTMG14
+ ODTCFG
+
+- st,ctl-map : controleur values depending of address mapping
+ for STM32MP15x: 9 values are requested in this order
+ ADDRMAP1
+ ADDRMAP2
+ ADDRMAP3
+ ADDRMAP4
+ ADDRMAP5
+ ADDRMAP6
+ ADDRMAP9
+ ADDRMAP10
+ ADDRMAP11
+
+- st,ctl-perf : controleur values depending of performance and scheduling
+ for STM32MP15x: 17 values are requested in this order
+ SCHED
+ SCHED1
+ PERFHPR1
+ PERFLPR1
+ PERFWR1
+ PCFGR_0
+ PCFGW_0
+ PCFGQOS0_0
+ PCFGQOS1_0
+ PCFGWQOS0_0
+ PCFGWQOS1_0
+ PCFGR_1
+ PCFGW_1
+ PCFGQOS0_1
+ PCFGQOS1_1
+ PCFGWQOS0_1
+ PCFGWQOS1_1
+
+phyc attributes:
+----------------
+- st,phy-reg : phy values depending of the DDR type (DDR3/LPDDR2/LPDDR3)
+ for STM32MP15x: 10 values are requested in this order
+ PGCR
+ ACIOCR
+ DXCCR
+ DSGCR
+ DCR
+ ODTCR
+ ZQ0CR1
+ DX0GCR
+ DX1GCR
+ DX2GCR
+ DX3GCR
+
+- st,phy-timing : phy values depending of frequency and timing parameter of DDR
+ for STM32MP15x: 10 values are requested in this order
+ PTR0
+ PTR1
+ PTR2
+ DTPR0
+ DTPR1
+ DTPR2
+ MR0
+ MR1
+ MR2
+ MR3
+
+- st,phy-cal : phy cal depending of calibration or tuning of DDR
+ for STM32MP15x: 12 values are requested in this order
+ DX0DLLCR
+ DX0DQTR
+ DX0DQSTR
+ DX1DLLCR
+ DX1DQTR
+ DX1DQSTR
+ DX2DLLCR
+ DX2DQTR
+ DX2DQSTR
+ DX3DLLCR
+ DX3DQTR
+ DX3DQSTR
+
+Example:
+
+/ {
+ soc {
+ u-boot,dm-spl;
+
+ ddr: ddr@0x5A003000{
+ u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
+
+ compatible = "st,stm32mp1-ddr";
+
+ reg = <0x5A003000 0x550
+ 0x5A004000 0x234>;
+
+ clocks = <&rcc_clk AXIDCG>,
+ <&rcc_clk DDRC1>,
+ <&rcc_clk DDRC2>,
+ <&rcc_clk DDRPHYC>,
+ <&rcc_clk DDRCAPB>,
+ <&rcc_clk DDRPHYCAPB>;
+
+ clock-names = "axidcg",
+ "ddrc1",
+ "ddrc2",
+ "ddrphyc",
+ "ddrcapb",
+ "ddrphycapb";
+
+ st,mem-name = "DDR3 2x4Gb 533MHz";
+ st,mem-speed = <533>;
+ st,mem-size = <0x40000000>;
+
+ st,ctl-reg = <
+ 0x00040401 /*MSTR*/
+ 0x00000010 /*MRCTRL0*/
+ 0x00000000 /*MRCTRL1*/
+ 0x00000000 /*DERATEEN*/
+ 0x00800000 /*DERATEINT*/
+ 0x00000000 /*PWRCTL*/
+ 0x00400010 /*PWRTMG*/
+ 0x00000000 /*HWLPCTL*/
+ 0x00210000 /*RFSHCTL0*/
+ 0x00000000 /*RFSHCTL3*/
+ 0x00000000 /*CRCPARCTL0*/
+ 0xC2000040 /*ZQCTL0*/
+ 0x02050105 /*DFITMG0*/
+ 0x00000202 /*DFITMG1*/
+ 0x07000000 /*DFILPCFG0*/
+ 0xC0400003 /*DFIUPD0*/
+ 0x00000000 /*DFIUPD1*/
+ 0x00000000 /*DFIUPD2*/
+ 0x00000000 /*DFIPHYMSTR*/
+ 0x00000001 /*ODTMAP*/
+ 0x00000000 /*DBG0*/
+ 0x00000000 /*DBG1*/
+ 0x00000000 /*DBGCMD*/
+ 0x00000000 /*POISONCFG*/
+ 0x00000010 /*PCCFG*/
+ >;
+
+ st,ctl-timing = <
+ 0x0080008A /*RFSHTMG*/
+ 0x121B2414 /*DRAMTMG0*/
+ 0x000D041B /*DRAMTMG1*/
+ 0x0607080E /*DRAMTMG2*/
+ 0x0050400C /*DRAMTMG3*/
+ 0x07040407 /*DRAMTMG4*/
+ 0x06060303 /*DRAMTMG5*/
+ 0x02020002 /*DRAMTMG6*/
+ 0x00000202 /*DRAMTMG7*/
+ 0x00001005 /*DRAMTMG8*/
+ 0x000D041B /*DRAMTMG1*/4
+ 0x06000600 /*ODTCFG*/
+ >;
+
+ st,ctl-map = <
+ 0x00080808 /*ADDRMAP1*/
+ 0x00000000 /*ADDRMAP2*/
+ 0x00000000 /*ADDRMAP3*/
+ 0x00001F1F /*ADDRMAP4*/
+ 0x07070707 /*ADDRMAP5*/
+ 0x0F070707 /*ADDRMAP6*/
+ 0x00000000 /*ADDRMAP9*/
+ 0x00000000 /*ADDRMAP10*/
+ 0x00000000 /*ADDRMAP11*/
+ >;
+
+ st,ctl-perf = <
+ 0x00001201 /*SCHED*/
+ 0x00001201 /*SCHED*/1
+ 0x01000001 /*PERFHPR1*/
+ 0x08000200 /*PERFLPR1*/
+ 0x08000400 /*PERFWR1*/
+ 0x00010000 /*PCFGR_0*/
+ 0x00000000 /*PCFGW_0*/
+ 0x02100B03 /*PCFGQOS0_0*/
+ 0x00800100 /*PCFGQOS1_0*/
+ 0x01100B03 /*PCFGWQOS0_0*/
+ 0x01000200 /*PCFGWQOS1_0*/
+ 0x00010000 /*PCFGR_1*/
+ 0x00000000 /*PCFGW_1*/
+ 0x02100B03 /*PCFGQOS0_1*/
+ 0x00800000 /*PCFGQOS1_1*/
+ 0x01100B03 /*PCFGWQOS0_1*/
+ 0x01000200 /*PCFGWQOS1_1*/
+ >;
+
+ st,phy-reg = <
+ 0x01442E02 /*PGCR*/
+ 0x10400812 /*ACIOCR*/
+ 0x00000C40 /*DXCCR*/
+ 0xF200001F /*DSGCR*/
+ 0x0000000B /*DCR*/
+ 0x00010000 /*ODTCR*/
+ 0x0000007B /*ZQ0CR1*/
+ 0x0000CE81 /*DX0GCR*/
+ 0x0000CE81 /*DX1GCR*/
+ 0x0000CE81 /*DX2GCR*/
+ 0x0000CE81 /*DX3GCR*/
+ >;
+
+ st,phy-timing = <
+ 0x0022A41B /*PTR0*/
+ 0x047C0740 /*PTR1*/
+ 0x042D9C80 /*PTR2*/
+ 0x369477D0 /*DTPR0*/
+ 0x098A00D8 /*DTPR1*/
+ 0x10023600 /*DTPR2*/
+ 0x00000830 /*MR0*/
+ 0x00000000 /*MR1*/
+ 0x00000208 /*MR2*/
+ 0x00000000 /*MR3*/
+ >;
+
+ st,phy-cal = <
+ 0x40000000 /*DX0DLLCR*/
+ 0xFFFFFFFF /*DX0DQTR*/
+ 0x3DB02000 /*DX0DQSTR*/
+ 0x40000000 /*DX1DLLCR*/
+ 0xFFFFFFFF /*DX1DQTR*/
+ 0x3DB02000 /*DX1DQSTR*/
+ 0x40000000 /*DX2DLLCR*/
+ 0xFFFFFFFF /*DX2DQTR*/
+ 0x3DB02000 /*DX2DQSTR*/
+ 0x40000000 /*DX3DLLCR*/
+ 0xFFFFFFFF /*DX3DQTR*/
+ 0x3DB02000 /*DX3DQSTR*/
+ >;
+
+ status = "okay";
+ };
+ };
+};