arm64: zynqmp: Remove comment about gem spec in kv260
The latest SOM specification doesn't enforce certain MIO lines allocated
for ethernet or ethernet controller itself. That's why remove comment about
it which is likely there from early version of specification.
Also removed the same comment from pinctrl node. It is clear that it has to
be defined for different carrier cards.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9406377bf2c391ac0200670511bd6b0edb097c96.1676880543.git.michal.simek@amd.com
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts
index 83c6502..c82e1df 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dts
@@ -229,7 +229,7 @@
/* gem2/gem3 via PL with phys u79@2 and u80@3 */
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
status = "okay";
pinctrl_uart1_default: uart1-default {
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts
index f41a2f8..9dd160c 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dts
@@ -229,7 +229,7 @@
/* gem2/gem3 via PL with phys u79@2 and u80@3 */
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
status = "okay";
pinctrl_uart1_default: uart1-default {
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
index 0be5b29..6f5a426 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
@@ -159,7 +159,7 @@
bus-width = <8>;
};
-&gem3 { /* required by spec */
+&gem3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem3_default>;
@@ -185,7 +185,7 @@
};
};
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
status = "okay";
pinctrl_uart1_default: uart1-default {
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
index fca57a6..7764adf 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
@@ -146,7 +146,7 @@
bus-width = <8>;
};
-&gem3 { /* required by spec */
+&gem3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem3_default>;
@@ -172,7 +172,7 @@
};
};
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
status = "okay";
pinctrl_uart1_default: uart1-default {