diff --git a/src/arm/amazon/alpine.dtsi b/src/arm/amazon/alpine.dtsi
index ff68dfb..90bd12f 100644
--- a/src/arm/amazon/alpine.dtsi
+++ b/src/arm/amazon/alpine.dtsi
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git a/src/arm/aspeed/aspeed-bmc-facebook-bletchley.dts b/src/arm/aspeed/aspeed-bmc-facebook-bletchley.dts
index e899de6..5be0e8f 100644
--- a/src/arm/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ b/src/arm/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -45,8 +45,8 @@
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git a/src/arm/aspeed/aspeed-bmc-facebook-wedge400.dts b/src/arm/aspeed/aspeed-bmc-facebook-wedge400.dts
index a677c82..5a8169b 100644
--- a/src/arm/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/src/arm/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -80,8 +80,8 @@
 		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git a/src/arm/aspeed/aspeed-bmc-opp-tacoma.dts b/src/arm/aspeed/aspeed-bmc-opp-tacoma.dts
index 3f6010e..213023b 100644
--- a/src/arm/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/src/arm/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -456,7 +456,7 @@
 	status = "okay";
 
 	tpm: tpm@2e {
-		compatible = "tcg,tpm-tis-i2c";
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
 		reg = <0x2e>;
 	};
 };
diff --git a/src/arm/aspeed/aspeed-g4.dtsi b/src/arm/aspeed/aspeed-g4.dtsi
index 530491a..857cb26 100644
--- a/src/arm/aspeed/aspeed-g4.dtsi
+++ b/src/arm/aspeed/aspeed-g4.dtsi
@@ -466,7 +466,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git a/src/arm/aspeed/aspeed-g5.dtsi b/src/arm/aspeed/aspeed-g5.dtsi
index 04f98d1..e6f3cf3c 100644
--- a/src/arm/aspeed/aspeed-g5.dtsi
+++ b/src/arm/aspeed/aspeed-g5.dtsi
@@ -363,6 +363,7 @@
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -594,7 +595,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git a/src/arm/aspeed/aspeed-g6.dtsi b/src/arm/aspeed/aspeed-g6.dtsi
index c4d1faa..29f9469 100644
--- a/src/arm/aspeed/aspeed-g6.dtsi
+++ b/src/arm/aspeed/aspeed-g6.dtsi
@@ -474,6 +474,7 @@
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -488,6 +489,7 @@
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -902,7 +904,6 @@
 	i2c0: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@
 	i2c1: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@
 	i2c2: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@
 	i2c3: i2c-bus@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@
 	i2c4: i2c-bus@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@
 	i2c5: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@
 	i2c6: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@
 	i2c7: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@
 	i2c8: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@
 	i2c9: i2c-bus@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@
 	i2c10: i2c-bus@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@
 	i2c11: i2c-bus@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@
 	i2c12: i2c-bus@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@
 	i2c13: i2c-bus@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@
 	i2c14: i2c-bus@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@
 	i2c15: i2c-bus@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git a/src/arm/aspeed/ast2600-facebook-netbmc-common.dtsi b/src/arm/aspeed/ast2600-facebook-netbmc-common.dtsi
index 31590d3..00e5887 100644
--- a/src/arm/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/src/arm/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -35,8 +35,8 @@
 		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
 		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
diff --git a/src/arm/broadcom/bcm-cygnus.dtsi b/src/arm/broadcom/bcm-cygnus.dtsi
index f9f79ed..07ca0d9 100644
--- a/src/arm/broadcom/bcm-cygnus.dtsi
+++ b/src/arm/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git a/src/arm/broadcom/bcm-hr2.dtsi b/src/arm/broadcom/bcm-hr2.dtsi
index 788a680..75545b1 100644
--- a/src/arm/broadcom/bcm-hr2.dtsi
+++ b/src/arm/broadcom/bcm-hr2.dtsi
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/src/arm/broadcom/bcm-nsp.dtsi b/src/arm/broadcom/bcm-nsp.dtsi
index 9d20ba3..6a4482c 100644
--- a/src/arm/broadcom/bcm-nsp.dtsi
+++ b/src/arm/broadcom/bcm-nsp.dtsi
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -352,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/src/arm/broadcom/bcm2711-rpi.dtsi b/src/arm/broadcom/bcm2711-rpi.dtsi
index 98817a6..d233a19 100644
--- a/src/arm/broadcom/bcm2711-rpi.dtsi
+++ b/src/arm/broadcom/bcm2711-rpi.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
 
+#include <dt-bindings/power/raspberrypi-power.h>
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 
 / {
@@ -76,3 +77,7 @@
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&xhci {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/src/arm/broadcom/bcm2711.dtsi b/src/arm/broadcom/bcm2711.dtsi
index 4a379a1..22c7f15 100644
--- a/src/arm/broadcom/bcm2711.dtsi
+++ b/src/arm/broadcom/bcm2711.dtsi
@@ -604,6 +604,20 @@
 			};
 		};
 
+		xhci: usb@7e9c0000 {
+			compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+			reg = <0x0 0x7e9c0000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			/* DWC2 and this IP block share the same USB PHY,
+			 * enabling both at the same time results in lockups.
+			 * So keep this node disabled and let the bootloader
+			 * decide which interface should be enabled.
+			 */
+			status = "disabled";
+		};
+
 		v3d: gpu@7ec00000 {
 			compatible = "brcm,2711-v3d";
 			reg = <0x0 0x7ec00000 0x4000>,
diff --git a/src/arm/broadcom/bcm63138.dtsi b/src/arm/broadcom/bcm63138.dtsi
index 93281c4..4ef0228 100644
--- a/src/arm/broadcom/bcm63138.dtsi
+++ b/src/arm/broadcom/bcm63138.dtsi
@@ -232,6 +232,12 @@
 			interrupt-names = "nand";
 		};
 
+		serial@4400 {
+			compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+			reg = <0x4400 0x1e0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		bootlut: bootlut@8000 {
 			compatible = "brcm,bcm63138-bootlut";
 			reg = <0x8000 0x50>;
diff --git a/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts b/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts
index 4d70f6a..6d5e690 100644
--- a/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts
+++ b/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -60,6 +60,8 @@
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git a/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts b/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts
index 9ec0169..5f4c849 100644
--- a/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts
+++ b/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -89,6 +89,8 @@
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
diff --git a/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts b/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
index 90fd51b..2c89db3 100644
--- a/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
+++ b/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
@@ -165,6 +165,24 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				/*
+				 * PHY 0..4 are internal to the MV88E6060 switch but appear
+				 * as independent devices.
+				 */
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+
+				/* Altima AMI101L used by the WAN port */
 				phy9: ethernet-phy@9 {
 					reg = <9>;
 				};
@@ -181,21 +199,25 @@
 						port@0 {
 							reg = <0>;
 							label = "lan1";
+							phy-handle = <&phy0>;
 						};
 
 						port@1 {
 							reg = <1>;
 							label = "lan2";
+							phy-handle = <&phy1>;
 						};
 
 						port@2 {
 							reg = <2>;
 							label = "lan3";
+							phy-handle = <&phy2>;
 						};
 
 						port@3 {
 							reg = <3>;
 							label = "lan4";
+							phy-handle = <&phy3>;
 						};
 
 						port@5 {
diff --git a/src/arm/intel/socfpga/socfpga.dtsi b/src/arm/intel/socfpga/socfpga.dtsi
index 4c1d140..35be141 100644
--- a/src/arm/intel/socfpga/socfpga.dtsi
+++ b/src/arm/intel/socfpga/socfpga.dtsi
@@ -768,7 +768,7 @@
 			status = "disabled";
 		};
 
-		nand0: nand@ff900000 {
+		nand0: nand-controller@ff900000 {
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			compatible = "altr,socfpga-denali-nand";
diff --git a/src/arm/intel/socfpga/socfpga_arria10.dtsi b/src/arm/intel/socfpga/socfpga_arria10.dtsi
index f36063c..6b6e775 100644
--- a/src/arm/intel/socfpga/socfpga_arria10.dtsi
+++ b/src/arm/intel/socfpga/socfpga_arria10.dtsi
@@ -669,7 +669,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
diff --git a/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts b/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts
index 11ccdc6..0434f1c 100644
--- a/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts
+++ b/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -17,8 +17,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <3>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_arria5_socdk.dts b/src/arm/intel/socfpga/socfpga_arria5_socdk.dts
index c483857..7342f59 100644
--- a/src/arm/intel/socfpga/socfpga_arria5_socdk.dts
+++ b/src/arm/intel/socfpga/socfpga_arria5_socdk.dts
@@ -124,8 +124,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts b/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts
index c7f5fa0..d37a982 100644
--- a/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -129,8 +129,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts b/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts
index 3dd99c7..9e4db74 100644
--- a/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -174,8 +174,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts b/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts
index 2564671..ce0d651 100644
--- a/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -121,8 +121,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
index e0630b0..65f390b 100644
--- a/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -229,8 +229,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -246,8 +244,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm/marvell/armada-370-rd.dts b/src/arm/marvell/armada-370-rd.dts
index b459a67..f23f6b3 100644
--- a/src/arm/marvell/armada-370-rd.dts
+++ b/src/arm/marvell/armada-370-rd.dts
@@ -95,7 +95,7 @@
 			gpio-fan {
 				compatible = "gpio-fan";
 				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
+				gpio-fan,speed-map = <0 0>, <3000 1>;
 				pinctrl-0 = <&fan_pins>;
 				pinctrl-names = "default";
 			};
@@ -149,39 +149,37 @@
 		};
 	};
 
-	switch: switch@10 {
+	switch: ethernet-switch@10 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x10>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -196,25 +194,25 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switchphy0: switchphy@0 {
+			switchphy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy1: switchphy@1 {
+			switchphy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy2: switchphy@2 {
+			switchphy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy3: switchphy@3 {
+			switchphy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/src/arm/marvell/armada-370-seagate-nas-2bay.dts b/src/arm/marvell/armada-370-seagate-nas-2bay.dts
index 8dd242e..6ec3dd3 100644
--- a/src/arm/marvell/armada-370-seagate-nas-2bay.dts
+++ b/src/arm/marvell/armada-370-seagate-nas-2bay.dts
@@ -25,9 +25,9 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  950 2
-			 1400 1
-			 1800 0>;
+			<   0 3>,
+			< 950 2>,
+			<1400 1>,
+			<1800 0>;
 	};
 };
diff --git a/src/arm/marvell/armada-370-seagate-nas-4bay.dts b/src/arm/marvell/armada-370-seagate-nas-4bay.dts
index 370ca9c..3011578 100644
--- a/src/arm/marvell/armada-370-seagate-nas-4bay.dts
+++ b/src/arm/marvell/armada-370-seagate-nas-4bay.dts
@@ -106,10 +106,10 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
+			<   0 3>,
+			< 800 2>,
+			<1050 1>,
+			<1300 0>;
 	};
 };
 
diff --git a/src/arm/marvell/armada-370-synology-ds213j.dts b/src/arm/marvell/armada-370-synology-ds213j.dts
index b07d11d..02599a3 100644
--- a/src/arm/marvell/armada-370-synology-ds213j.dts
+++ b/src/arm/marvell/armada-370-synology-ds213j.dts
@@ -113,14 +113,14 @@
 			 &gpio2  0 GPIO_ACTIVE_HIGH
 			 &gpio2  1 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       1000 1
-				       1150 2
-				       1350 4
-				       1500 3
-				       1650 5
-				       1750 6
-				       1900 7 >;
+		gpio-fan,speed-map = <   0 0>,
+				     <1000 1>,
+				     <1150 2>,
+				     <1350 4>,
+				     <1500 3>,
+				     <1650 5>,
+				     <1750 6>,
+				     <1900 7>;
 	};
 
 	gpio-leds {
diff --git a/src/arm/marvell/armada-381-netgear-gs110emx.dts b/src/arm/marvell/armada-381-netgear-gs110emx.dts
index f4c4b21..5baf83e 100644
--- a/src/arm/marvell/armada-381-netgear-gs110emx.dts
+++ b/src/arm/marvell/armada-381-netgear-gs110emx.dts
@@ -77,51 +77,49 @@
 	pinctrl-0 = <&mdio_pins>;
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&switch_interrupt_pins>;
 		pinctrl-names = "default";
-		#size-cells = <0>;
 		reg = <0>;
 
 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -142,11 +140,11 @@
 			};
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				ethernet = <&eth0>;
 				phy-mode = "rgmii";
 				reg = <0>;
@@ -158,55 +156,55 @@
 				};
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 				reg = <1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				label = "lan2";
 				phy-handle = <&switch0phy2>;
 				reg = <2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 				reg = <3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 				reg = <4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				label = "lan5";
 				phy-handle = <&switch0phy5>;
 				reg = <5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				label = "lan6";
 				phy-handle = <&switch0phy6>;
 				reg = <6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				label = "lan7";
 				phy-handle = <&switch0phy7>;
 				reg = <7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				label = "lan8";
 				phy-handle = <&switch0phy8>;
 				reg = <8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				/* 88X3310P external phy */
 				label = "lan9";
 				phy-handle = <&phy1>;
@@ -214,7 +212,7 @@
 				reg = <9>;
 			};
 
-			port@a {
+			ethernet-port@a {
 				/* 88X3310P external phy */
 				label = "lan10";
 				phy-handle = <&phy2>;
diff --git a/src/arm/marvell/armada-385-clearfog-gtr-l8.dts b/src/arm/marvell/armada-385-clearfog-gtr-l8.dts
index 1990f7d..1707d1b 100644
--- a/src/arm/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/src/arm/marvell/armada-385-clearfog-gtr-l8.dts
@@ -7,66 +7,66 @@
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6190";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan8";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan7";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan6";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan5";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "lan3";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "lan2";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "lan1";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@10 {
+			ethernet-port@10 {
 				reg = <10>;
 				phy-mode = "2500base-x";
 
@@ -83,35 +83,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@1 {
+			switch0phy0: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy1: switch0phy1@2 {
+			switch0phy1: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy2: switch0phy2@3 {
+			switch0phy2: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy3: switch0phy3@4 {
+			switch0phy3: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy4: switch0phy4@5 {
+			switch0phy4: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy5: switch0phy5@6 {
+			switch0phy5: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy6: switch0phy6@7 {
+			switch0phy6: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy7: switch0phy7@8 {
+			switch0phy7: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git a/src/arm/marvell/armada-385-clearfog-gtr-s4.dts b/src/arm/marvell/armada-385-clearfog-gtr-s4.dts
index b795ad5..a7678a7 100644
--- a/src/arm/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/src/arm/marvell/armada-385-clearfog-gtr-s4.dts
@@ -11,42 +11,42 @@
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
 		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "2500base-x";
 				ethernet = <&eth1>;
@@ -63,19 +63,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/src/arm/marvell/armada-385-linksys.dtsi b/src/arm/marvell/armada-385-linksys.dtsi
index fc8216f..4116ed6 100644
--- a/src/arm/marvell/armada-385-linksys.dtsi
+++ b/src/arm/marvell/armada-385-linksys.dtsi
@@ -158,42 +158,40 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "sgmii";
 				ethernet = <&eth2>;
diff --git a/src/arm/marvell/armada-385-synology-ds116.dts b/src/arm/marvell/armada-385-synology-ds116.dts
index ea91ff9..6caa5c5 100644
--- a/src/arm/marvell/armada-385-synology-ds116.dts
+++ b/src/arm/marvell/armada-385-synology-ds116.dts
@@ -131,14 +131,14 @@
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
 				<&gpio1 17 GPIO_ACTIVE_HIGH>,
 				<&gpio1 16 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <   0 0
-					      1500 1
-					      2500 2
-					      3000 3
-					      3400 4
-					      3700 5
-					      3900 6
-					      4000 7>;
+			gpio-fan,speed-map = <   0 0>,
+					     <1500 1>,
+					     <2500 2>,
+					     <3000 3>,
+					     <3400 4>,
+					     <3700 5>,
+					     <3900 6>,
+					     <4000 7>;
 			#cooling-cells = <2>;
 		};
 
diff --git a/src/arm/marvell/armada-385-turris-omnia.dts b/src/arm/marvell/armada-385-turris-omnia.dts
index 2d8d319..7b755bb 100644
--- a/src/arm/marvell/armada-385-turris-omnia.dts
+++ b/src/arm/marvell/armada-385-turris-omnia.dts
@@ -435,12 +435,10 @@
 	};
 
 	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
+	ethernet-switch@10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&swint_pins>;
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		dsa,member = <0 0>;
 		reg = <0x10>;
@@ -448,36 +446,36 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ports@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			ports@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			ports@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			ports@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			ports@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan4";
 			};
 
-			ports@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -488,7 +486,7 @@
 				};
 			};
 
-			ports@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				ethernet = <&eth0>;
 				phy-mode = "rgmii-id";
diff --git a/src/arm/marvell/armada-388-clearfog.dts b/src/arm/marvell/armada-388-clearfog.dts
index 32c569d..3290cca 100644
--- a/src/arm/marvell/armada-388-clearfog.dts
+++ b/src/arm/marvell/armada-388-clearfog.dts
@@ -92,44 +92,42 @@
 &mdio {
 	status = "okay";
 
-	switch@4 {
+	ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <4>;
 		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
 		pinctrl-names = "default";
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan5";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan4";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan3";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan1";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "1000base-x";
@@ -140,7 +138,7 @@
 				};
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				/* 88E1512 external phy */
 				reg = <6>;
 				label = "lan6";
diff --git a/src/arm/marvell/armada-388-gp.dts b/src/arm/marvell/armada-388-gp.dts
index e2ba505..1de0a17 100644
--- a/src/arm/marvell/armada-388-gp.dts
+++ b/src/arm/marvell/armada-388-gp.dts
@@ -237,8 +237,8 @@
 		gpio-fan {
 			compatible = "gpio-fan";
 			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <	 0 0
-					      3000 1>;
+			gpio-fan,speed-map = <	 0 0>,
+					     <3000 1>;
 		};
 	};
 
diff --git a/src/arm/marvell/armada-xp-linksys-mamba.dts b/src/arm/marvell/armada-xp-linksys-mamba.dts
index 7a0614f..ea859f7 100644
--- a/src/arm/marvell/armada-xp-linksys-mamba.dts
+++ b/src/arm/marvell/armada-xp-linksys-mamba.dts
@@ -265,42 +265,40 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "internet";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				phy-mode = "rgmii-id";
 				ethernet = <&eth0>;
diff --git a/src/arm/marvell/kirkwood-dnskw.dtsi b/src/arm/marvell/kirkwood-dnskw.dtsi
index eb91746..0738eb6 100644
--- a/src/arm/marvell/kirkwood-dnskw.dtsi
+++ b/src/arm/marvell/kirkwood-dnskw.dtsi
@@ -38,9 +38,9 @@
 		pinctrl-names = "default";
 		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
 			 &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
+		gpio-fan,speed-map = <0    0>,
+				     <3000 1>,
+				     <6000 2>;
 	};
 
 	gpio_poweroff {
diff --git a/src/arm/marvell/kirkwood-l-50.dts b/src/arm/marvell/kirkwood-l-50.dts
index dffb9f8..c841eb8 100644
--- a/src/arm/marvell/kirkwood-l-50.dts
+++ b/src/arm/marvell/kirkwood-l-50.dts
@@ -65,6 +65,7 @@
 			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -79,6 +80,7 @@
 			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
diff --git a/src/arm/marvell/kirkwood-linkstation-6282.dtsi b/src/arm/marvell/kirkwood-linkstation-6282.dtsi
index 377b6e9..dfac204 100644
--- a/src/arm/marvell/kirkwood-linkstation-6282.dtsi
+++ b/src/arm/marvell/kirkwood-linkstation-6282.dtsi
@@ -118,10 +118,11 @@
 		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
 			 &gpio0 16 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm/marvell/kirkwood-linkstation-lswxl.dts b/src/arm/marvell/kirkwood-linkstation-lswxl.dts
index c6024b5..0425df8 100644
--- a/src/arm/marvell/kirkwood-linkstation-lswxl.dts
+++ b/src/arm/marvell/kirkwood-linkstation-lswxl.dts
@@ -69,10 +69,11 @@
 		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
 			 &gpio1 15 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm/marvell/kirkwood-lsxl.dtsi b/src/arm/marvell/kirkwood-lsxl.dtsi
index 88b70ba..f80af24 100644
--- a/src/arm/marvell/kirkwood-lsxl.dtsi
+++ b/src/arm/marvell/kirkwood-lsxl.dtsi
@@ -172,10 +172,11 @@
 		pinctrl-names = "default";
 		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
 		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
+		gpio-fan,speed-map =
+				<0    3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
diff --git a/src/arm/marvell/kirkwood-ns2max.dts b/src/arm/marvell/kirkwood-ns2max.dts
index c0a087e..044958b 100644
--- a/src/arm/marvell/kirkwood-ns2max.dts
+++ b/src/arm/marvell/kirkwood-ns2max.dts
@@ -29,15 +29,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
+			<   0  0>,
+			<1500 15>,
+			<1700 14>,
+			<1800 13>,
+			<2100 12>,
+			<3100 11>,
+			<3300 10>,
+			<4300  9>,
+			<5500  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/src/arm/marvell/kirkwood-ns2mini.dts b/src/arm/marvell/kirkwood-ns2mini.dts
index 5b9fa14..3fbe008 100644
--- a/src/arm/marvell/kirkwood-ns2mini.dts
+++ b/src/arm/marvell/kirkwood-ns2mini.dts
@@ -30,15 +30,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
+			<   0  0>,
+			<3000 15>,
+			<3180 14>,
+			<4140 13>,
+			<4570 12>,
+			<6760 11>,
+			<7140 10>,
+			<7980  9>,
+			<9200  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/src/arm/marvell/kirkwood-synology.dtsi b/src/arm/marvell/kirkwood-synology.dtsi
index 9b66660..20964eb 100644
--- a/src/arm/marvell/kirkwood-synology.dtsi
+++ b/src/arm/marvell/kirkwood-synology.dtsi
@@ -286,14 +286,15 @@
 		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-150-15-18 {
@@ -306,14 +307,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-100-32-35 {
@@ -326,14 +328,15 @@
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-18 {
@@ -346,14 +349,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-1 {
@@ -366,14 +370,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-3 {
@@ -388,14 +393,15 @@
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
 			       &gpio1 12 GPIO_ACTIVE_HIGH
 			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-leds-alarm-12 {
diff --git a/src/arm/marvell/mvebu-linkstation-fan.dtsi b/src/arm/marvell/mvebu-linkstation-fan.dtsi
index e172029..a260c42 100644
--- a/src/arm/marvell/mvebu-linkstation-fan.dtsi
+++ b/src/arm/marvell/mvebu-linkstation-fan.dtsi
@@ -50,10 +50,10 @@
 		pinctrl-names = "default";
 
 		gpio-fan,speed-map =
-			<0		3
-			1500	2
-			3250	1
-			5000	0>;
+			<   0 3>,
+			<1500 2>,
+			<3250 1>,
+			<5000 0>;
 	};
 };
 
diff --git a/src/arm/microchip/at91-sam9x60_curiosity.dts b/src/arm/microchip/at91-sam9x60_curiosity.dts
index 83372c1..c6fbdd2 100644
--- a/src/arm/microchip/at91-sam9x60_curiosity.dts
+++ b/src/arm/microchip/at91-sam9x60_curiosity.dts
@@ -249,6 +249,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -353,6 +355,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
diff --git a/src/arm/microchip/at91-sam9x60ek.dts b/src/arm/microchip/at91-sam9x60ek.dts
index 5cd5930..f3cbb67 100644
--- a/src/arm/microchip/at91-sam9x60ek.dts
+++ b/src/arm/microchip/at91-sam9x60ek.dts
@@ -292,6 +292,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -465,6 +467,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
diff --git a/src/arm/microchip/at91-sama5d27_som1_ek.dts b/src/arm/microchip/at91-sama5d27_som1_ek.dts
index d0a6dbd..f3ffb8f 100644
--- a/src/arm/microchip/at91-sama5d27_som1_ek.dts
+++ b/src/arm/microchip/at91-sama5d27_som1_ek.dts
@@ -54,7 +54,6 @@
 
 		sdmmc0: sdio-host@a0000000 {
 			bus-width = <8>;
-			mmc-ddr-3_3v;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			status = "okay";
diff --git a/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts b/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts
index e055b9e..1523983 100644
--- a/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,7 +197,6 @@
 
 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
diff --git a/src/arm/nuvoton/nuvoton-wpcm450.dtsi b/src/arm/nuvoton/nuvoton-wpcm450.dtsi
index fd671c7..6e1f0f1 100644
--- a/src/arm/nuvoton/nuvoton-wpcm450.dtsi
+++ b/src/arm/nuvoton/nuvoton-wpcm450.dtsi
@@ -120,6 +120,7 @@
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 					     <3 IRQ_TYPE_LEVEL_HIGH>,
 					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -128,6 +129,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
diff --git a/src/arm/nvidia/tegra20-colibri.dtsi b/src/arm/nvidia/tegra20-colibri.dtsi
index 16b374e..8c1d5c9 100644
--- a/src/arm/nvidia/tegra20-colibri.dtsi
+++ b/src/arm/nvidia/tegra20-colibri.dtsi
@@ -446,7 +446,7 @@
 	tegra_ac97: ac97@70002000 {
 		status = "okay";
 		nvidia,codec-reset-gpio =
-			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 		nvidia,codec-sync-gpio =
 			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm/nvidia/tegra30-apalis-v1.1.dtsi b/src/arm/nvidia/tegra30-apalis-v1.1.dtsi
index 1640763..ff0d684 100644
--- a/src/arm/nvidia/tegra30-apalis-v1.1.dtsi
+++ b/src/arm/nvidia/tegra30-apalis-v1.1.dtsi
@@ -997,7 +997,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/src/arm/nvidia/tegra30-apalis.dtsi b/src/arm/nvidia/tegra30-apalis.dtsi
index 3b6fad2..d38f1dd 100644
--- a/src/arm/nvidia/tegra30-apalis.dtsi
+++ b/src/arm/nvidia/tegra30-apalis.dtsi
@@ -980,7 +980,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/src/arm/nvidia/tegra30-colibri.dtsi b/src/arm/nvidia/tegra30-colibri.dtsi
index 4eb526f..81c8a5f 100644
--- a/src/arm/nvidia/tegra30-colibri.dtsi
+++ b/src/arm/nvidia/tegra30-colibri.dtsi
@@ -861,7 +861,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/src/arm/nxp/imx/imx1-ads.dts b/src/arm/nxp/imx/imx1-ads.dts
index 5833fb6..2c817c4 100644
--- a/src/arm/nxp/imx/imx1-ads.dts
+++ b/src/arm/nxp/imx/imx1-ads.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git a/src/arm/nxp/imx/imx1-apf9328.dts b/src/arm/nxp/imx/imx1-apf9328.dts
index 1f11e95..e66eef8 100644
--- a/src/arm/nxp/imx/imx1-apf9328.dts
+++ b/src/arm/nxp/imx/imx1-apf9328.dts
@@ -45,7 +45,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git a/src/arm/nxp/imx/imx1.dtsi b/src/arm/nxp/imx/imx1.dtsi
index e312f1e..1ac1096 100644
--- a/src/arm/nxp/imx/imx1.dtsi
+++ b/src/arm/nxp/imx/imx1.dtsi
@@ -68,7 +68,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@200000 {
+		bus@200000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -155,7 +155,7 @@
 			};
 		};
 
-		aipi@210000 {
+		bus@210000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -268,9 +268,12 @@
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/src/arm/nxp/imx/imx25-eukrea-cpuimx25.dtsi b/src/arm/nxp/imx/imx25-eukrea-cpuimx25.dtsi
index 0703f62..93a6e4e 100644
--- a/src/arm/nxp/imx/imx25-eukrea-cpuimx25.dtsi
+++ b/src/arm/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index fc8a502..6cddb2c 100644
--- a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
+			qvga_timings: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96..64b2ffa 100644
--- a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1..fb074bf 100644
--- a/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/src/arm/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git a/src/arm/nxp/imx/imx25-pdk.dts b/src/arm/nxp/imx/imx25-pdk.dts
index 04f4b12..dd176fb 100644
--- a/src/arm/nxp/imx/imx25-pdk.dts
+++ b/src/arm/nxp/imx/imx25-pdk.dts
@@ -68,7 +68,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
@@ -122,6 +122,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks 129>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/src/arm/nxp/imx/imx25.dtsi b/src/arm/nxp/imx/imx25.dtsi
index 534c70b..9cfff21 100644
--- a/src/arm/nxp/imx/imx25.dtsi
+++ b/src/arm/nxp/imx/imx25.dtsi
@@ -68,6 +68,16 @@
 		};
 	};
 
+	usbphy0: usb-phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usbphy1: usb-phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -93,7 +103,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f80000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <3>;
 				status = "disabled";
 			};
@@ -104,7 +114,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f84000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <10>;
 				status = "disabled";
 			};
@@ -151,7 +161,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f98000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <4>;
 				status = "disabled";
 			};
@@ -178,12 +188,9 @@
 			};
 
 			kpp: kpp@43fa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 				reg = <0x43fa8000 0x4000>;
 				clocks = <&clks 102>;
-				clock-names = "";
 				interrupts = <24>;
 				status = "disabled";
 			};
@@ -542,7 +549,7 @@
 			};
 
 			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx25-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
 				clocks = <&clks 99>;
@@ -597,7 +604,7 @@
 			#size-cells = <1>;
 		};
 
-		emi@80000000 {
+		bus@80000000 {
 			compatible = "fsl,emi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -617,22 +624,4 @@
 			};
 		};
 	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-	};
 };
diff --git a/src/arm/nxp/imx/imx27-apf27dev.dts b/src/arm/nxp/imx/imx27-apf27dev.dts
index a21f1f7..849306c 100644
--- a/src/arm/nxp/imx/imx27-apf27dev.dts
+++ b/src/arm/nxp/imx/imx27-apf27dev.dts
@@ -16,7 +16,7 @@
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
@@ -47,7 +47,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/src/arm/nxp/imx/imx27-eukrea-cpuimx27.dtsi b/src/arm/nxp/imx/imx27-eukrea-cpuimx27.dtsi
index 74110bb..c7e9235 100644
--- a/src/arm/nxp/imx/imx27-eukrea-cpuimx27.dtsi
+++ b/src/arm/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -90,7 +90,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/src/arm/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts b/src/arm/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 145e459..d787936 100644
--- a/src/arm/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/src/arm/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/src/arm/nxp/imx/imx27-pdk.dts b/src/arm/nxp/imx/imx27-pdk.dts
index 35123b7..21d4369 100644
--- a/src/arm/nxp/imx/imx27-pdk.dts
+++ b/src/arm/nxp/imx/imx27-pdk.dts
@@ -14,18 +14,12 @@
 		reg = <0xa0000000 0x08000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx27-phytec-phycard-s-rdk.dts b/src/arm/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 25442eb..27c93b9 100644
--- a/src/arm/nxp/imx/imx27-phytec-phycard-s-rdk.dts
+++ b/src/arm/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
diff --git a/src/arm/nxp/imx/imx27-phytec-phycore-rdk.dts b/src/arm/nxp/imx/imx27-phytec-phycore-rdk.dts
index 7f0cd4d..b8048e1 100644
--- a/src/arm/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ b/src/arm/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
@@ -48,15 +48,12 @@
 		regulator-always-on;
 	};
 
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy2: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_5v0>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx27-phytec-phycore-som.dtsi b/src/arm/nxp/imx/imx27-phytec-phycore-som.dtsi
index 7b2ea4c..e958d72 100644
--- a/src/arm/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ b/src/arm/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -29,19 +29,13 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&sw3_reg>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
@@ -49,12 +43,12 @@
 	status = "okay";
 
 	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
+	mux-ssi0 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <0xcb205000>;
 	};
 
-	pins4 {
+	mux-pins4 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <0x00001000>;
 	};
@@ -186,7 +180,7 @@
 		reg = <0x52>;
 	};
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -314,7 +308,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git a/src/arm/nxp/imx/imx27.dtsi b/src/arm/nxp/imx/imx27.dtsi
index faba12e..ec47269 100644
--- a/src/arm/nxp/imx/imx27.dtsi
+++ b/src/arm/nxp/imx/imx27.dtsi
@@ -81,7 +81,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi1: aipi@10000000 { /* AIPI1 */
+		aipi1: bus@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -453,7 +453,7 @@
 			};
 		};
 
-		aipi2: aipi@10020000 { /* AIPI2 */
+		aipi2: bus@10020000 { /* AIPI2 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -588,6 +588,9 @@
 		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
+			ranges = <0 0xffff4c00 0xb400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/src/arm/nxp/imx/imx53-cx9020.dts b/src/arm/nxp/imx/imx53-cx9020.dts
index 055d23a..0814f56 100644
--- a/src/arm/nxp/imx/imx53-cx9020.dts
+++ b/src/arm/nxp/imx/imx53-cx9020.dts
@@ -22,7 +22,7 @@
 	};
 
 	display-0 {
-		#address-cells =<1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "rgb24";
diff --git a/src/arm/nxp/imx/imx6dl-b105pv2.dts b/src/arm/nxp/imx/imx6dl-b105pv2.dts
index 7d4ae11..63cdf24 100644
--- a/src/arm/nxp/imx/imx6dl-b105pv2.dts
+++ b/src/arm/nxp/imx/imx6dl-b105pv2.dts
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/src/arm/nxp/imx/imx6dl-b105v2.dts b/src/arm/nxp/imx/imx6dl-b105v2.dts
index 9c5938e..2e75d70 100644
--- a/src/arm/nxp/imx/imx6dl-b105v2.dts
+++ b/src/arm/nxp/imx/imx6dl-b105v2.dts
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/src/arm/nxp/imx/imx6dl-b125pv2.dts b/src/arm/nxp/imx/imx6dl-b125pv2.dts
index 01df7cf..94625d5 100644
--- a/src/arm/nxp/imx/imx6dl-b125pv2.dts
+++ b/src/arm/nxp/imx/imx6dl-b125pv2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/src/arm/nxp/imx/imx6dl-b125v2.dts b/src/arm/nxp/imx/imx6dl-b125v2.dts
index a015453..b3cfa81 100644
--- a/src/arm/nxp/imx/imx6dl-b125v2.dts
+++ b/src/arm/nxp/imx/imx6dl-b125v2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/src/arm/nxp/imx/imx6dl-b155v2.dts b/src/arm/nxp/imx/imx6dl-b155v2.dts
index b71ee6b..7edc788 100644
--- a/src/arm/nxp/imx/imx6dl-b155v2.dts
+++ b/src/arm/nxp/imx/imx6dl-b155v2.dts
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h84";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		touchscreen-inverted-x;
diff --git a/src/arm/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/src/arm/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index 717decd..3ac7a45 100644
--- a/src/arm/nxp/imx/imx6q-apalis-ixora-v1.2.dts
+++ b/src/arm/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -76,6 +76,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can1_power>;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -85,6 +86,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can2_power>;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx6q-b850v3.dts b/src/arm/nxp/imx/imx6q-b850v3.dts
index db8c332..cad112e 100644
--- a/src/arm/nxp/imx/imx6q-b850v3.dts
+++ b/src/arm/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git a/src/arm/nxp/imx/imx6q-bx50v3.dtsi b/src/arm/nxp/imx/imx6q-bx50v3.dtsi
index 99f4f6a..c1ae7c4 100644
--- a/src/arm/nxp/imx/imx6q-bx50v3.dtsi
+++ b/src/arm/nxp/imx/imx6q-bx50v3.dtsi
@@ -245,6 +245,7 @@
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx6q-var-mx6customboard.dts b/src/arm/nxp/imx/imx6q-var-mx6customboard.dts
index 6f9d094..18a6208 100644
--- a/src/arm/nxp/imx/imx6q-var-mx6customboard.dts
+++ b/src/arm/nxp/imx/imx6q-var-mx6customboard.dts
@@ -16,7 +16,7 @@
 	compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q";
 
 	panel0: lvds-panel0 {
-		compatible =  "panel-lvds";
+		compatible = "panel-lvds";
 		backlight = <&backlight_lvds>;
 		width-mm = <152>;
 		height-mm = <91>;
@@ -43,7 +43,7 @@
 	};
 
 	panel1: lvds-panel1 {
-		compatible =  "panel-lvds";
+		compatible = "panel-lvds";
 		width-mm = <152>;
 		height-mm = <91>;
 		data-mapping = "jeida-18";
diff --git a/src/arm/nxp/imx/imx6qdl-apalis.dtsi b/src/arm/nxp/imx/imx6qdl-apalis.dtsi
index 4cc9652..ea40623 100644
--- a/src/arm/nxp/imx/imx6qdl-apalis.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-apalis.dtsi
@@ -12,6 +12,13 @@
 	model = "Toradex Apalis iMX6Q/D Module";
 	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
 
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC1 slot */
+		mmc2 = &usdhc2; /* SD1 slot */
+		/delete-property/ mmc3;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@10000000 {
 		device_type = "memory";
@@ -166,7 +173,7 @@
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
 		regulator-max-microvolt = <5000000>;
@@ -619,7 +626,6 @@
 		blocks = <0x5>;
 		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/src/arm/nxp/imx/imx6qdl-colibri.dtsi b/src/arm/nxp/imx/imx6qdl-colibri.dtsi
index 11d9c7a..d3a7a6e 100644
--- a/src/arm/nxp/imx/imx6qdl-colibri.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-colibri.dtsi
@@ -12,6 +12,13 @@
 	model = "Toradex Colibri iMX6DL/S Module";
 	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
 
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD Slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <0 45 63 88 119 158 203 255>;
@@ -543,7 +550,6 @@
 		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
-		interrupt-controller;
 		id = <0>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/src/arm/nxp/imx/imx6qdl-emcon-avari.dtsi b/src/arm/nxp/imx/imx6qdl-emcon-avari.dtsi
index f1a41c7..5587069 100644
--- a/src/arm/nxp/imx/imx6qdl-emcon-avari.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-emcon-avari.dtsi
@@ -54,7 +54,7 @@
 	clk_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <12000000>;
+		clock-frequency = <12000000>;
 	};
 
 	sound {
diff --git a/src/arm/nxp/imx/imx6qdl-emcon.dtsi b/src/arm/nxp/imx/imx6qdl-emcon.dtsi
index a63e73a..42b2ba2 100644
--- a/src/arm/nxp/imx/imx6qdl-emcon.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-emcon.dtsi
@@ -225,7 +225,6 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/src/arm/nxp/imx/imx6qdl-mba6.dtsi b/src/arm/nxp/imx/imx6qdl-mba6.dtsi
index da0f8da..4d2abcd 100644
--- a/src/arm/nxp/imx/imx6qdl-mba6.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-mba6.dtsi
@@ -500,21 +500,21 @@
 
 	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
 		>;
 	};
diff --git a/src/arm/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/src/arm/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 1139745..c0c47ad 100644
--- a/src/arm/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -124,6 +124,7 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
 		interrupt-controller;
 
 		regulators {
diff --git a/src/arm/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/src/arm/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 86b4269..85e278e 100644
--- a/src/arm/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/src/arm/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/src/arm/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
index b81799d..596b3bb 100644
--- a/src/arm/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
@@ -25,7 +25,7 @@
 		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_touch>;
-		pinctrl-names ="default";
+		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
 		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
 		#io-channel-cells = <1>;
diff --git a/src/arm/nxp/imx/imx6qdl.dtsi b/src/arm/nxp/imx/imx6qdl.dtsi
index bda182e..81142c5 100644
--- a/src/arm/nxp/imx/imx6qdl.dtsi
+++ b/src/arm/nxp/imx/imx6qdl.dtsi
@@ -475,7 +475,7 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 							"txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
diff --git a/src/arm/nxp/imx/imx6sx.dtsi b/src/arm/nxp/imx/imx6sx.dtsi
index f6b3592..df3a375 100644
--- a/src/arm/nxp/imx/imx6sx.dtsi
+++ b/src/arm/nxp/imx/imx6sx.dtsi
@@ -418,7 +418,7 @@
 					       <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
@@ -1010,7 +1010,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1024,7 +1024,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1038,7 +1038,7 @@
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
diff --git a/src/arm/nxp/imx/imx6ul.dtsi b/src/arm/nxp/imx/imx6ul.dtsi
index 3b87d98..a27a755 100644
--- a/src/arm/nxp/imx/imx6ul.dtsi
+++ b/src/arm/nxp/imx/imx6ul.dtsi
@@ -364,7 +364,7 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
diff --git a/src/arm/nxp/imx/imx6ull-phytec-tauri.dtsi b/src/arm/nxp/imx/imx6ull-phytec-tauri.dtsi
index 44cc4ff..d12fb44 100644
--- a/src/arm/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ b/src/arm/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -116,7 +116,7 @@
 	tpm_tis: tpm@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <1>;
 		spi-max-frequency = <20000000>;
 		interrupt-parent = <&gpio5>;
diff --git a/src/arm/nxp/imx/imx7-tqma7.dtsi b/src/arm/nxp/imx/imx7-tqma7.dtsi
index fe42b0a..3fc3130 100644
--- a/src/arm/nxp/imx/imx7-tqma7.dtsi
+++ b/src/arm/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@
 		};
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
+	/* LM75A temperature sensor, TQMa7x 01xx */
+	lm75a: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
 	se97b: temperature-sensor-eeprom@1e {
 		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1e>;
-		status = "okay";
 	};
 
 	/* ST M24C64 */
diff --git a/src/arm/nxp/imx/imx7d-colibri-emmc.dtsi b/src/arm/nxp/imx/imx7d-colibri-emmc.dtsi
index 3740e34..9670f45 100644
--- a/src/arm/nxp/imx/imx7d-colibri-emmc.dtsi
+++ b/src/arm/nxp/imx/imx7d-colibri-emmc.dtsi
@@ -11,6 +11,10 @@
 		/* Required to properly pass MAC addresses from bootloader. */
 		ethernet0 = &fec1;
 		ethernet1 = &fec2;
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	memory@80000000 {
diff --git a/src/arm/nxp/imx/imx7d-flex-concentrator.dts b/src/arm/nxp/imx/imx7d-flex-concentrator.dts
index 3a72384..9984b34 100644
--- a/src/arm/nxp/imx/imx7d-flex-concentrator.dts
+++ b/src/arm/nxp/imx/imx7d-flex-concentrator.dts
@@ -130,7 +130,7 @@
 	 * TCG specification - Section 6.4.1 Clocking:
 	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
 	 */
-	st33htph: tpm-tis@0 {
+	st33htph: tpm@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
diff --git a/src/arm/nxp/imx/imx7d-meerkat96.dts b/src/arm/nxp/imx/imx7d-meerkat96.dts
index dd8003b..f0fda15 100644
--- a/src/arm/nxp/imx/imx7d-meerkat96.dts
+++ b/src/arm/nxp/imx/imx7d-meerkat96.dts
@@ -212,7 +212,7 @@
 	keep-power-in-suspend;
 	wakeup-source;
 	vmmc-supply = <&reg_wlreg_on>;
-	vqmmc-supply =<&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
 	status = "okay";
 
 	brcmf: wifi@1 {
diff --git a/src/arm/nxp/imx/imx7d-pico-dwarf.dts b/src/arm/nxp/imx/imx7d-pico-dwarf.dts
index 12361fc..1b96565 100644
--- a/src/arm/nxp/imx/imx7d-pico-dwarf.dts
+++ b/src/arm/nxp/imx/imx7d-pico-dwarf.dts
@@ -63,6 +63,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git a/src/arm/nxp/imx/imx7d-pico.dtsi b/src/arm/nxp/imx/imx7d-pico.dtsi
index c5eefe8..8d5037a 100644
--- a/src/arm/nxp/imx/imx7d-pico.dtsi
+++ b/src/arm/nxp/imx/imx7d-pico.dtsi
@@ -108,6 +108,14 @@
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &ecspi3 {
 	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
diff --git a/src/arm/nxp/imx/imx7d-smegw01.dts b/src/arm/nxp/imx/imx7d-smegw01.dts
index 85b97b5..7ed27c7 100644
--- a/src/arm/nxp/imx/imx7d-smegw01.dts
+++ b/src/arm/nxp/imx/imx7d-smegw01.dts
@@ -149,7 +149,7 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 =<&pinctrl_i2c2>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	clock-frequency = <100000>;
 	status = "okay";
 
diff --git a/src/arm/nxp/imx/imx7d.dtsi b/src/arm/nxp/imx/imx7d.dtsi
index 4b94b8a..0484e34 100644
--- a/src/arm/nxp/imx/imx7d.dtsi
+++ b/src/arm/nxp/imx/imx7d.dtsi
@@ -217,9 +217,6 @@
 };
 
 &ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port@1 {
 		reg = <1>;
 		ca_funnel_in_port1: endpoint {
diff --git a/src/arm/nxp/imx/imx7s.dtsi b/src/arm/nxp/imx/imx7s.dtsi
index 5387da8..9c81c6b 100644
--- a/src/arm/nxp/imx/imx7s.dtsi
+++ b/src/arm/nxp/imx/imx7s.dtsi
@@ -183,6 +183,15 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX7D_OCRAM_CLK>;
+		};
+
 		funnel@30041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x30041000 0x1000>;
@@ -190,7 +199,11 @@
 			clock-names = "apb_pclk";
 
 			ca_funnel_in_ports: in-ports {
-				port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
 					ca_funnel_in_port0: endpoint {
 						remote-endpoint = <&etm0_out_port>;
 					};
@@ -605,6 +618,7 @@
 					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -720,6 +734,8 @@
 				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
 					<&clks IMX7D_ECSPI4_ROOT_CLK>;
 				clock-names = "ipg", "per";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
 				status = "disabled";
 			};
 
@@ -811,7 +827,7 @@
 			};
 
 			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
@@ -850,6 +866,26 @@
 					};
 				};
 			};
+
+			mipi_dsi: dsi@30760000 {
+				compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30760000 0x400>;
+				clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>,
+						  <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-rates = <0>, <333000000>;
+				power-domains = <&pgc_mipi_phy>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				samsung,burst-clock-frequency = <891000000>;
+				samsung,esc-clock-frequency = <20000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				status = "disabled";
+			};
 		};
 
 		aips3: bus@30800000 {
@@ -875,6 +911,8 @@
 					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
 						<&clks IMX7D_ECSPI1_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
 					status = "disabled";
 				};
 
@@ -887,6 +925,8 @@
 					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
 						<&clks IMX7D_ECSPI2_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
 					status = "disabled";
 				};
 
@@ -899,6 +939,8 @@
 					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
 						<&clks IMX7D_ECSPI3_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
 					status = "disabled";
 				};
 
@@ -1275,7 +1317,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/src/arm/nxp/imx/mba6ulx.dtsi b/src/arm/nxp/imx/mba6ulx.dtsi
index 5a8b867..e78d0a7 100644
--- a/src/arm/nxp/imx/mba6ulx.dtsi
+++ b/src/arm/nxp/imx/mba6ulx.dtsi
@@ -467,7 +467,7 @@
 
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
 		>;
 	};
diff --git a/src/arm/nxp/lpc/lpc18xx.dtsi b/src/arm/nxp/lpc/lpc18xx.dtsi
index 9cf09c1..6dd7329 100644
--- a/src/arm/nxp/lpc/lpc18xx.dtsi
+++ b/src/arm/nxp/lpc/lpc18xx.dtsi
@@ -74,7 +74,7 @@
 		sct_pwm: pwm@40000000 {
 			compatible = "nxp,lpc1850-sct-pwm";
 			reg = <0x40000000 0x1000>;
-			clocks =<&ccu1 CLK_CPU_SCT>;
+			clocks = <&ccu1 CLK_CPU_SCT>;
 			clock-names = "pwm";
 			resets = <&rgu 37>;
 			#pwm-cells = <3>;
diff --git a/src/arm/nxp/ls/ls1021a.dtsi b/src/arm/nxp/ls/ls1021a.dtsi
index 49c78c8..d471cc5 100644
--- a/src/arm/nxp/ls/ls1021a.dtsi
+++ b/src/arm/nxp/ls/ls1021a.dtsi
@@ -112,7 +112,7 @@
 			compatible = "fsl,ls1021a-msi";
 			reg = <0x0 0x1570e00 0x0 0x8>;
 			msi-controller;
-			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller@1570e08 {
diff --git a/src/arm/nxp/mxs/imx23-sansa.dts b/src/arm/nxp/mxs/imx23-sansa.dts
index 636cf09..b23e7ad 100644
--- a/src/arm/nxp/mxs/imx23-sansa.dts
+++ b/src/arm/nxp/mxs/imx23-sansa.dts
@@ -175,10 +175,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
diff --git a/src/arm/nxp/mxs/imx23.dtsi b/src/arm/nxp/mxs/imx23.dtsi
index fdf18b7..0309592 100644
--- a/src/arm/nxp/mxs/imx23.dtsi
+++ b/src/arm/nxp/mxs/imx23.dtsi
@@ -110,7 +110,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <0>;
 					interrupts = <16>;
 					gpio-controller;
@@ -120,7 +120,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <1>;
 					interrupts = <17>;
 					gpio-controller;
@@ -130,7 +130,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <2>;
 					interrupts = <18>;
 					gpio-controller;
@@ -412,7 +412,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <7>, <5>, <9>, <26>,
@@ -484,7 +484,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx23-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
diff --git a/src/arm/nxp/mxs/imx28-lwe.dtsi b/src/arm/nxp/mxs/imx28-lwe.dtsi
index bb971e6..69fcb0d 100644
--- a/src/arm/nxp/mxs/imx28-lwe.dtsi
+++ b/src/arm/nxp/mxs/imx28-lwe.dtsi
@@ -18,6 +18,7 @@
 
 	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
+		device_type = "memory";
 	};
 
 	reg_3v3: regulator-reg-3v3 {
diff --git a/src/arm/nxp/mxs/imx28-tx28.dts b/src/arm/nxp/mxs/imx28-tx28.dts
index 153e401..5485fe11 100644
--- a/src/arm/nxp/mxs/imx28-tx28.dts
+++ b/src/arm/nxp/mxs/imx28-tx28.dts
@@ -260,6 +260,7 @@
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&mclk>;
diff --git a/src/arm/nxp/mxs/imx28.dtsi b/src/arm/nxp/mxs/imx28.dtsi
index 6932d23..4817fba 100644
--- a/src/arm/nxp/mxs/imx28.dtsi
+++ b/src/arm/nxp/mxs/imx28.dtsi
@@ -164,7 +164,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <0>;
 					interrupts = <127>;
 					gpio-controller;
@@ -174,7 +174,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <1>;
 					interrupts = <126>;
 					gpio-controller;
@@ -184,7 +184,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <2>;
 					interrupts = <125>;
 					gpio-controller;
@@ -194,7 +194,7 @@
 				};
 
 				gpio3: gpio@3 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <3>;
 					interrupts = <124>;
 					gpio-controller;
@@ -204,7 +204,7 @@
 				};
 
 				gpio4: gpio@4 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <4>;
 					interrupts = <123>;
 					gpio-controller;
@@ -990,7 +990,7 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
 				interrupts = <78>, <79>, <66>, <0>,
@@ -1100,7 +1100,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx28-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
diff --git a/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi b/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi
index 14c411f..5a19da9 100644
--- a/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi
+++ b/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -55,7 +55,7 @@
 	brightness-levels = <0 4 8 16 32 64 128 255>;
 	default-brightness-level = <6>;
 	power-supply = <&reg_3v3>;
-	status  = "okay";
+	status = "okay";
 };
 
 &dcu0 {
diff --git a/src/arm/nxp/vf/vf610-bk4.dts b/src/arm/nxp/vf/vf610-bk4.dts
index e4f691d..722182f 100644
--- a/src/arm/nxp/vf/vf610-bk4.dts
+++ b/src/arm/nxp/vf/vf610-bk4.dts
@@ -68,7 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* PTD12 ->RPIO[91] */
-		sck-gpios  = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
 		/* PTD10 ->RPIO[89] */
 		miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <0>;
@@ -79,7 +79,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			/* PTB18 -> RGPIO[40] */
-			load-gpios  = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			spi-max-frequency = <100000>;
 		};
 	};
diff --git a/src/arm/nxp/vf/vf610-zii-cfu1.dts b/src/arm/nxp/vf/vf610-zii-cfu1.dts
index 1a19aec..7e72f86 100644
--- a/src/arm/nxp/vf/vf610-zii-cfu1.dts
+++ b/src/arm/nxp/vf/vf610-zii-cfu1.dts
@@ -162,7 +162,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6085";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -173,26 +173,26 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_fc_1000_1";
 					phy-mode = "1000base-x";
@@ -200,7 +200,7 @@
 					sfp = <&sff>;
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
diff --git a/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts b/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts
index 16b4e06..029f49b 100644
--- a/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -294,11 +294,11 @@
 		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		sck-gpios  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
-			     &gpio1  8 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
+			    &gpio1 8 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 
 		flash@0 {
@@ -338,6 +338,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
diff --git a/src/arm/nxp/vf/vf610-zii-scu4-aib.dts b/src/arm/nxp/vf/vf610-zii-scu4-aib.dts
index df13354..77492ee 100644
--- a/src/arm/nxp/vf/vf610-zii-scu4-aib.dts
+++ b/src/arm/nxp/vf/vf610-zii-scu4-aib.dts
@@ -47,17 +47,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0: switch0@0 {
+			switch0: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 0>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
+					ethernet-port@0 {
 						reg = <0>;
 						phy-mode = "rmii";
 						ethernet = <&fec1>;
@@ -68,37 +68,37 @@
 						};
 					};
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "aib2main_1";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "aib2main_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_1000_5";
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_cu_1000_6";
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_cu_1000_4";
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_cu_1000_7";
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "modem_pic";
 
@@ -108,7 +108,7 @@
 						};
 					};
 
-					switch0port10: port@10 {
+					switch0port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -130,32 +130,32 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1: switch1@0 {
+			switch1: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 1>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "eth_cu_1000_3";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_cu_100_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_100_3";
 					};
 
-					switch1port9: port@9 {
+					switch1port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -168,7 +168,7 @@
 						};
 					};
 
-					switch1port10: port@10 {
+					switch1port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
@@ -188,17 +188,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2: switch2@0 {
+			switch2: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 2>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_2";
 						phy-mode = "1000base-x";
@@ -206,7 +206,7 @@
 						sfp = <&sff1>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_3";
 						phy-mode = "1000base-x";
@@ -214,7 +214,7 @@
 						sfp = <&sff2>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_4";
 						phy-mode = "1000base-x";
@@ -222,7 +222,7 @@
 						sfp = <&sff3>;
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_fc_1000_5";
 						phy-mode = "1000base-x";
@@ -230,7 +230,7 @@
 						sfp = <&sff4>;
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_fc_1000_6";
 						phy-mode = "1000base-x";
@@ -238,7 +238,7 @@
 						sfp = <&sff5>;
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "eth_fc_1000_7";
 						phy-mode = "1000base-x";
@@ -246,7 +246,7 @@
 						sfp = <&sff6>;
 					};
 
-					port@9 {
+					ethernet-port@9 {
 						reg = <9>;
 						label = "eth_fc_1000_1";
 						phy-mode = "1000base-x";
@@ -254,7 +254,7 @@
 						sfp = <&sff0>;
 					};
 
-					switch2port10: port@10 {
+					switch2port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "2500base-x";
@@ -276,17 +276,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch3: switch3@0 {
+			switch3: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 3>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_8";
 						phy-mode = "1000base-x";
@@ -294,7 +294,7 @@
 						sfp = <&sff7>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_9";
 						phy-mode = "1000base-x";
@@ -302,7 +302,7 @@
 						sfp = <&sff8>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_10";
 						phy-mode = "1000base-x";
@@ -310,7 +310,7 @@
 						sfp = <&sff9>;
 					};
 
-					switch3port9: port@9 {
+					switch3port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "2500base-x";
@@ -322,7 +322,7 @@
 						};
 					};
 
-					switch3port10: port@10 {
+					switch3port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
diff --git a/src/arm/nxp/vf/vf610-zii-spb4.dts b/src/arm/nxp/vf/vf610-zii-spb4.dts
index 1461804..2a49046 100644
--- a/src/arm/nxp/vf/vf610-zii-spb4.dts
+++ b/src/arm/nxp/vf/vf610-zii-spb4.dts
@@ -123,7 +123,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -134,11 +134,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -149,32 +149,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
diff --git a/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts b/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts
index 463c245..078d869 100644
--- a/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts
+++ b/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -112,7 +112,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -123,11 +123,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -138,27 +138,27 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_100_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@8 {
+				ethernet-port@8 {
 					reg = <8>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@9 {
+				ethernet-port@9 {
 					reg = <9>;
 					label = "eth_cu_1000_2";
 					phy-handle = <&phy9>;
@@ -167,12 +167,12 @@
 				};
 			};
 
-			mdio1 {
+			mdio-external {
 				compatible = "marvell,mv88e6xxx-mdio-external";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy9: phy9@0 {
+				phy9: ethernet-phy@0 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					pinctrl-0 = <&pinctrl_gpio_phy9>;
 					pinctrl-names = "default";
diff --git a/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts b/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts
index f5ae0d5..22c8f44 100644
--- a/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts
+++ b/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -137,7 +137,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -148,11 +148,11 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					phy-mode = "rmii";
 					ethernet = <&fec1>;
@@ -163,32 +163,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
diff --git a/src/arm/qcom/pm8018.dtsi b/src/arm/qcom/pm8018.dtsi
new file mode 100644
index 0000000..22f3c7b
--- /dev/null
+++ b/src/arm/qcom/pm8018.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+	pm8018: pmic {
+		compatible = "qcom,pm8018", "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8018-pwrkey",
+				     "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8018 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8018_mpps: mpps@50 {
+			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8018_mpps 0 0 6>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8018_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8018_gpio 0 0 6>;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/src/arm/qcom/pm8058.dtsi b/src/arm/qcom/pm8058.dtsi
new file mode 100644
index 0000000..984b797
--- /dev/null
+++ b/src/arm/qcom/pm8058.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8058: pmic {
+		compatible = "qcom,pm8058";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8058-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8058_led48: led@48 {
+			compatible = "qcom,pm8058-keypad-led";
+			reg = <0x48>;
+			status = "disabled";
+		};
+
+		vibrator@4a {
+			compatible = "qcom,pm8058-vib";
+			reg = <0x4a>;
+		};
+
+		pm8058_mpps: mpps@50 {
+			compatible = "qcom,pm8058-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8058_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8058_led131: led@131 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x131>;
+			status = "disabled";
+		};
+
+		pm8058_led132: led@132 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x132>;
+			status = "disabled";
+		};
+
+		pm8058_led133: led@133 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x133>;
+			status = "disabled";
+		};
+
+		pm8058_keypad: keypad@148 {
+			compatible = "qcom,pm8058-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+		};
+
+		pm8058_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8058_gpio 0 0 44>;
+			#gpio-cells = <2>;
+		};
+
+		pm8058_xoadc: xoadc@197 {
+			compatible = "qcom,pm8058-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			ichg: adc-channel@3 {
+				reg = <0x00 0x03>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			ref_325mv: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+
+		rtc@1e8 {
+			compatible = "qcom,pm8058-rtc";
+			reg = <0x1e8>;
+			interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+	};
+};
diff --git a/src/arm/qcom/qcom-pm8226.dtsi b/src/arm/qcom/pm8226.dtsi
similarity index 99%
rename from src/arm/qcom/qcom-pm8226.dtsi
rename to src/arm/qcom/pm8226.dtsi
index 2413778..2fd4f13 100644
--- a/src/arm/qcom/qcom-pm8226.dtsi
+++ b/src/arm/qcom/pm8226.dtsi
@@ -82,6 +82,8 @@
 					  "usb-valid",
 					  "dc-valid";
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git a/src/arm/qcom/pm8821.dtsi b/src/arm/qcom/pm8821.dtsi
new file mode 100644
index 0000000..064e3ba
--- /dev/null
+++ b/src/arm/qcom/pm8821.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+	pm8821: pmic {
+		compatible = "qcom,pm8821";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8821_mpps: mpps@50 {
+			compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8821_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/src/arm/qcom/qcom-pm8841.dtsi b/src/arm/qcom/pm8841.dtsi
similarity index 100%
rename from src/arm/qcom/qcom-pm8841.dtsi
rename to src/arm/qcom/pm8841.dtsi
diff --git a/src/arm/qcom/pm8921.dtsi b/src/arm/qcom/pm8921.dtsi
new file mode 100644
index 0000000..058962a
--- /dev/null
+++ b/src/arm/qcom/pm8921.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8921: pmic {
+		compatible = "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8921_mpps: mpps@50 {
+			compatible = "qcom,pm8921-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8921_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8921_keypad: keypad@148 {
+			compatible = "qcom,pm8921-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+			status = "disabled";
+		};
+
+		pm8921_gpio: gpio@150 {
+
+			compatible = "qcom,pm8921-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8921_gpio 0 0 44>;
+			#gpio-cells = <2>;
+
+		};
+
+		pm8921_xoadc: xoadc@197 {
+			compatible = "qcom,pm8921-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			batt_therm: adc-channel@8 {
+				reg = <0x00 0x08>;
+			};
+
+			batt_id: adc-channel@9 {
+				reg = <0x00 0x09>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			chg_temp: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
+	};
+};
diff --git a/src/arm/qcom/qcom-pm8941.dtsi b/src/arm/qcom/pm8941.dtsi
similarity index 99%
rename from src/arm/qcom/qcom-pm8941.dtsi
rename to src/arm/qcom/pm8941.dtsi
index ed0ba59..aca0052 100644
--- a/src/arm/qcom/qcom-pm8941.dtsi
+++ b/src/arm/qcom/pm8941.dtsi
@@ -99,6 +99,8 @@
 
 			usb-otg-in-supply = <&pm8941_5vs1>;
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git a/src/arm/qcom/qcom-pma8084.dtsi b/src/arm/qcom/pma8084.dtsi
similarity index 100%
rename from src/arm/qcom/qcom-pma8084.dtsi
rename to src/arm/qcom/pma8084.dtsi
diff --git a/src/arm/qcom/qcom-pmx55.dtsi b/src/arm/qcom/pmx55.dtsi
similarity index 100%
rename from src/arm/qcom/qcom-pmx55.dtsi
rename to src/arm/qcom/pmx55.dtsi
diff --git a/src/arm/qcom/qcom-pmx65.dtsi b/src/arm/qcom/pmx65.dtsi
similarity index 100%
rename from src/arm/qcom/qcom-pmx65.dtsi
rename to src/arm/qcom/pmx65.dtsi
diff --git a/src/arm/qcom/qcom-apq8026-asus-sparrow.dts b/src/arm/qcom/qcom-apq8026-asus-sparrow.dts
index aa0e0e8..a2ca456 100644
--- a/src/arm/qcom/qcom-apq8026-asus-sparrow.dts
+++ b/src/arm/qcom/qcom-apq8026-asus-sparrow.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
@@ -253,6 +253,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4400000>;
 	qcom,auto-recharge-threshold-voltage = <4300000>;
 	qcom,minimum-input-voltage = <4400000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts b/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts
index de19640..ac22896 100644
--- a/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ b/src/arm/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 #include <dt-bindings/input/ti-drv260x.h>
 
 /delete-node/ &adsp_region;
@@ -335,6 +335,8 @@
 	qcom,fast-charge-current-limit = <300000>;
 	qcom,fast-charge-safe-current = <600000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-apq8026-lg-lenok.dts b/src/arm/qcom/qcom-apq8026-lg-lenok.dts
index b887e53..0a1fd5e 100644
--- a/src/arm/qcom/qcom-apq8026-lg-lenok.dts
+++ b/src/arm/qcom/qcom-apq8026-lg-lenok.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 
@@ -292,6 +292,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index f516e04..cffc069 100644
--- a/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ b/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/input/input.h>
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
 /delete-node/ &smem_region;
diff --git a/src/arm/qcom/qcom-apq8060-dragonboard.dts b/src/arm/qcom/qcom-apq8060-dragonboard.dts
index 569cbf0..009afd8 100644
--- a/src/arm/qcom/qcom-apq8060-dragonboard.dts
+++ b/src/arm/qcom/qcom-apq8060-dragonboard.dts
@@ -5,6 +5,7 @@
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm APQ8060 Dragonboard";
@@ -71,7 +72,7 @@
 		/* Trig on both edges - getting close or far away */
 		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
 		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
 		io-channel-names = "aout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -272,6 +273,10 @@
 	};
 };
 
+&pm8058 {
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8058_gpio {
 	dragon_ethernet_gpios: ethernet-state {
 		pinconf {
@@ -447,6 +452,8 @@
 	 * that means
 	 */
 	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+
 		vdd_l0-supply = <&pm8901_s4>;
 		vdd_l1-supply = <&vph>;
 		vdd_l2-supply = <&vph>;
@@ -464,57 +471,63 @@
 		lvs3_in-supply = <&pm8058_s2>;
 		mvs_in-supply = <&pm8058_s3>;
 
-		l0 {
+		pm8901_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8901_l1: l1 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8901_l2: l2 {
 			/* TMA340 requires strictly 3.3V */
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8901_l3: l3 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8901_l4: l4 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8901_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8901_l6: l6 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
 
 		/* s0 and s1 are SAW regulators controlled over SPM */
-		s2 {
+		pm8901_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+		pm8901_s3: s3 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s4 {
+		pm8901_s4: s4 {
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -522,17 +535,22 @@
 		};
 
 		/* LVS0 thru 3 and mvs are just switches */
-		lvs0 {
+		pm8901_lvs0: lvs0 {
 			regulator-always-on;
 		};
-		lvs1 { };
-		lvs2 { };
-		lvs3 { };
-		mvs { };
+
+		pm8901_lvs1: lvs1 { };
+
+		pm8901_lvs2: lvs2 { };
+
+		pm8901_lvs3: lvs3 { };
 
+		pm8901_mvs: mvs { };
 	};
 
 	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
+
 		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
 		vdd_l2_l11_l12-supply = <&vph>;
 		vdd_l3_l4_l5-supply = <&vph>;
@@ -554,144 +572,169 @@
 		vdd_s4-supply = <&vph>;
 		vdd_ncp-supply = <&vph>;
 
-		l0 {
+		pm8058_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8058_l1: l1 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8058_l2: l2 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8058_l3: l3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8058_l4: l4 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8058_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8058_l6: l6 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3600000>;
 			bias-pull-down;
 		};
-		l7 {
+
+		pm8058_l7: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l8 {
+
+		pm8058_l8: l8 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <3050000>;
 			bias-pull-down;
 		};
-		l9 {
+
+		pm8058_l9: l9 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l10 {
+
+		pm8058_l10: l10 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l11 {
+
+		pm8058_l11: l11 {
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			bias-pull-down;
 		};
-		l12 {
+
+		pm8058_l12: l12 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
-		l13 {
+
+		pm8058_l13: l13 {
 			regulator-min-microvolt = <2050000>;
 			regulator-max-microvolt = <2050000>;
 			bias-pull-down;
 		};
-		l14 {
+
+		pm8058_l14: l14 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
-		l15 {
+
+		pm8058_l15: l15 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l16 {
+
+		pm8058_l16: l16 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l17 {
+
+		pm8058_l17: l17 {
 			// 1.5V according to schematic
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l18 {
+
+		pm8058_l18: l18 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
-		l19 {
+
+		pm8058_l19: l19 {
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			bias-pull-down;
 		};
-		l20 {
+
+		pm8058_l20: l20 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l21 {
+
+		pm8058_l21: l21 {
 			// 1.1 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l22 {
+
+		pm8058_l22: l22 {
 			// 1.2 V according to schematic
 			regulator-min-microvolt = <1150000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
-		l23 {
+
+		pm8058_l23: l23 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l24 {
+
+		pm8058_l24: l24 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l25 {
+
+		pm8058_l25: l25 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		s0 {
+		pm8058_s0: s0 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1325000>;
 			regulator-min-microvolt = <1100000>;
@@ -699,7 +742,8 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s1 {
+
+		pm8058_s1: s1 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1250000>;
 			regulator-min-microvolt = <1100000>;
@@ -707,21 +751,24 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s2 {
+
+		pm8058_s2: s2 {
 			// 1.3 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+
+		pm8058_s3: s3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
-		s4 {
+
+		pm8058_s4: s4 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -730,14 +777,15 @@
 		};
 
 		/* LVS0 and LVS1 are just switches */
-		lvs0 {
+		pm8058_lvs0: lvs0 {
 			bias-pull-down;
 		};
-		lvs1 {
+
+		pm8058_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		ncp {
+		pm8058_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -944,28 +992,32 @@
 	};
 };
 
-&xoadc {
+&pm8058_xoadc {
 	/* Reference voltage 2.2 V */
 	xoadc-ref-supply = <&pm8058_l18>;
 
 	/* Board-specific channels */
-	mpp5@5 {
+	adc-channel@5 {
 		/* Connected to AOUT of ALS sensor */
 		reg = <0x00 0x05>;
 	};
-	mpp6@6 {
+
+	adc-channel@6 {
 		/* Connected to test point TP43 */
 		reg = <0x00 0x06>;
 	};
-	mpp7@7 {
+
+	adc-channel@7 {
 		/* Connected to battery thermistor */
 		reg = <0x00 0x07>;
 	};
-	mpp8@8 {
+
+	adc-channel@8 {
 		/* Connected to battery ID detector */
 		reg = <0x00 0x08>;
 	};
-	mpp9@9 {
+
+	adc-channel@9 {
 		/* Connected to XO thermistor */
 		reg = <0x00 0x09>;
 	};
diff --git a/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts b/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts
index c0dd639..d460743 100644
--- a/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/src/arm/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -1,8 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Asus Nexus7(flo)";
 	compatible = "asus,nexus7-flo", "qcom,apq8064";
@@ -180,24 +184,26 @@
 	status = "okay";
 };
 
-/* eMMC */
-&sdcc1 {
-	vmmc-supply = <&pm8921_l5>;
-	vqmmc-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
 &mdp_dsi1_out {
 	remote-endpoint = <&dsi0_in>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
 
-
 		vdd_l24-supply = <&pm8921_s1>;
 		vdd_l25-supply = <&pm8921_s1>;
 		vin_lvs2-supply = <&pm8921_s1>;
@@ -209,7 +215,7 @@
 		vdd_ncp-supply = <&pm8921_l6>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -218,7 +224,7 @@
 		};
 
 		/* msm otg HSUSB_VDDCX */
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
@@ -231,55 +237,58 @@
 		 * tabla2x-slim-CDC_VDD_CP
 		 * tabla2x-slim-VDDIO_CDC
 		 */
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 			regulator-always-on;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
 		/* mipi_dsi.1-dsi1_pll_vdda */
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-always-on;
 		};
 
 		/* msm_otg-HSUSB_3p3 */
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
 		/* msm_otg-HSUSB_1p8 */
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
 		/* msm_sdcc.1-sdc_vdd */
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 		};
 
+		pm8921_l8: l8 {
+		};
+
 		/* mipi_dsi.1-dsi1_avdd */
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
@@ -287,14 +296,14 @@
 		};
 
 		/* pwm_power for backlight */
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			regulator-always-on;
 		};
 
 		/* camera, qdsp6 */
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
@@ -304,37 +313,44 @@
 		 * tabla2x-slim-CDC_VDDA_A_1P2V
 		 * tabla2x-slim-VDDD_CDC_D
 		 */
-		l25 {
+		pm8921_l25: l25 {
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 		/*
 		 * mipi_dsi.1-dsi1_vddio
 		 * pil_riva-pll_vdd
 		 */
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 	};
 };
 
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
 &usb_hs1_phy {
 	v3p3-supply = <&pm8921_l3>;
 	v1p8-supply = <&pm8921_l4>;
diff --git a/src/arm/qcom/qcom-apq8064-cm-qs600.dts b/src/arm/qcom/qcom-apq8064-cm-qs600.dts
index d6ecfd8..671d58c 100644
--- a/src/arm/qcom/qcom-apq8064-cm-qs600.dts
+++ b/src/arm/qcom/qcom-apq8064-cm-qs600.dts
@@ -1,8 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "CompuLab CM-QS600";
 	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
@@ -69,6 +72,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -82,6 +93,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -93,9 +106,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -103,52 +115,51 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
-
 	};
 };
 
diff --git a/src/arm/qcom/qcom-apq8064-ifc6410.dts b/src/arm/qcom/qcom-apq8064-ifc6410.dts
index b0c5e7b..ed86b24 100644
--- a/src/arm/qcom/qcom-apq8064-ifc6410.dts
+++ b/src/arm/qcom/qcom-apq8064-ifc6410.dts
@@ -1,9 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Qualcomm APQ8064/IFC6410";
 	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
@@ -170,6 +173,14 @@
 	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -192,6 +203,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -203,9 +216,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -213,59 +225,63 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_hdmi_switch: hdmi-switch {
 			bias-pull-down;
 		};
 	};
diff --git a/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 9244512..2412aa3 100644
--- a/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/src/arm/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Sony Xperia Z";
 	compatible = "sony,xperia-yuga", "qcom,apq8064";
@@ -65,6 +68,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio3", "gpio4", "gpio29", "gpio35";
@@ -82,11 +93,25 @@
 &riva {
 	pinctrl-names = "default";
 	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+	vddcx-supply = <&pm8921_s3>;
+	vddmx-supply = <&pm8921_l24>;
+	vddpx-supply = <&pm8921_s4>;
+
 	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8921_l4>;
+		vddrfa-supply = <&pm8921_s2>;
+		vddpa-supply = <&pm8921_l10>;
+		vdddig-supply = <&pm8921_lvs2>;
+	};
 };
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs_1_3_6-supply = <&pm8921_s4>;
 		vin_lvs_4_5_7-supply = <&pm8921_s4>;
@@ -98,7 +123,7 @@
 		vin_l28-supply = <&pm8921_s7>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -106,21 +131,21 @@
 			bias-pull-down;
 		};
 
-		s2 {
+		pm8921_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
 			bias-pull-down;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -129,205 +154,207 @@
 			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s8 {
+		pm8921_s8: s8 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
 		};
 
 		/* PMOS LDO */
-		l1 {
+		pm8921_l1: l1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			bias-pull-down;
 		};
 
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l7 {
+		pm8921_l7: l7 {
 			regulator-min-microvolt = <1850000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l8 {
+		pm8921_l8: l8 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l9 {
+		pm8921_l9: l9 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l10 {
+		pm8921_l10: l10 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
 
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l12 {
+		pm8921_l12: l12 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l14 {
+		pm8921_l14: l14 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l15 {
+		pm8921_l15: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l16 {
+		pm8921_l16: l16 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
-		l18 {
+		pm8921_l18: l18 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l21 {
+		pm8921_l21: l21 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l22 {
+		pm8921_l22: l22 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l24 {
+		pm8921_l24: l24 {
 			regulator-min-microvolt = <750000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
 
-		l25 {
+		pm8921_l25: l25 {
 			regulator-always-on;
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		l27 {
+		pm8921_l27: l27 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 		};
 
-		l28 {
+		pm8921_l28: l28 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l29 {
+		pm8921_l29: l29 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
 		/* Low Voltage Switch */
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs2 {
+		pm8921_lvs2: lvs2 {
 			bias-pull-down;
 		};
 
-		lvs3 {
+		pm8921_lvs3: lvs3 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 
-		usb-switch {};
+		pm8921_usb_switch: usb-switch {};
 
-		hdmi-switch {};
+		pm8921_hdmi_switch: hdmi-switch {
+			bias-pull-down;
+		};
 
-		ncp {
+		pm8921_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
diff --git a/src/arm/qcom/qcom-apq8064.dtsi b/src/arm/qcom/qcom-apq8064.dtsi
index 59fd86b..3faf570 100644
--- a/src/arm/qcom/qcom-apq8064.dtsi
+++ b/src/arm/qcom/qcom-apq8064.dtsi
@@ -284,23 +284,6 @@
 		};
 	};
 
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Charger temperature */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -655,133 +638,16 @@
 			clock-names = "core";
 		};
 
-		ssbi@c00000 {
+		ssbi2: ssbi@c00000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00c00000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8821: pmic {
-				compatible = "qcom,pm8821";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8821_mpps: mpps@50 {
-					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
-					reg = <0x50>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8821_mpps 0 0 4>;
-				};
-			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <74 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8921_gpio: gpio@150 {
-
-					compatible = "qcom,pm8921-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8921_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8921_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8921-adc";
-					reg = <197>;
-					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					batt_therm: adc-channel@8 {
-						reg = <0x00 0x08>;
-					};
-					batt_id: adc-channel@9 {
-						reg = <0x00 0x09>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					chg_temp: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-			};
 		};
 
 		qfprom: qfprom@700000 {
@@ -891,60 +757,6 @@
 				clocks = <&pxo_board>, <&cxo_board>;
 				clock-names = "pxo", "cxo";
 			};
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-
-				pm8921_s1: s1 {};
-				pm8921_s2: s2 {};
-				pm8921_s3: s3 {};
-				pm8921_s4: s4 {};
-				pm8921_s7: s7 {};
-				pm8921_s8: s8 {};
-
-				pm8921_l1: l1 {};
-				pm8921_l2: l2 {};
-				pm8921_l3: l3 {};
-				pm8921_l4: l4 {};
-				pm8921_l5: l5 {};
-				pm8921_l6: l6 {};
-				pm8921_l7: l7 {};
-				pm8921_l8: l8 {};
-				pm8921_l9: l9 {};
-				pm8921_l10: l10 {};
-				pm8921_l11: l11 {};
-				pm8921_l12: l12 {};
-				pm8921_l14: l14 {};
-				pm8921_l15: l15 {};
-				pm8921_l16: l16 {};
-				pm8921_l17: l17 {};
-				pm8921_l18: l18 {};
-				pm8921_l21: l21 {};
-				pm8921_l22: l22 {};
-				pm8921_l23: l23 {};
-				pm8921_l24: l24 {};
-				pm8921_l25: l25 {};
-				pm8921_l26: l26 {};
-				pm8921_l27: l27 {};
-				pm8921_l28: l28 {};
-				pm8921_l29: l29 {};
-
-				pm8921_lvs1: lvs1 {};
-				pm8921_lvs2: lvs2 {};
-				pm8921_lvs3: lvs3 {};
-				pm8921_lvs4: lvs4 {};
-				pm8921_lvs5: lvs5 {};
-				pm8921_lvs6: lvs6 {};
-				pm8921_lvs7: lvs7 {};
-
-				pm8921_usb_switch: usb-switch {};
-
-				pm8921_hdmi_switch: hdmi-switch {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {};
-			};
 		};
 
 		usb1: usb@12500000 {
@@ -1472,7 +1284,7 @@
 			qcom,ncb = <3>;
 		};
 
-		pcie: pci@1b500000 {
+		pcie: pcie@1b500000 {
 			compatible = "qcom,pcie-apq8064";
 			reg = <0x1b500000 0x1000>,
 			      <0x1b502000 0x80>,
@@ -1623,10 +1435,6 @@
 
 			memory-region = <&wcnss_mem>;
 
-			vddcx-supply = <&pm8921_s3>;
-			vddmx-supply = <&pm8921_l24>;
-			vddpx-supply = <&pm8921_s4>;
-
 			status = "disabled";
 
 			iris {
@@ -1634,11 +1442,6 @@
 
 				clocks = <&cxo_board>;
 				clock-names = "xo";
-
-				vddxo-supply = <&pm8921_l4>;
-				vddrfa-supply = <&pm8921_s2>;
-				vddpa-supply = <&pm8921_l10>;
-				vdddig-supply = <&pm8921_lvs2>;
 			};
 
 			smd-edge {
diff --git a/src/arm/qcom/qcom-apq8074-dragonboard.dts b/src/arm/qcom/qcom-apq8074-dragonboard.dts
index 6d1b243..6fce011 100644
--- a/src/arm/qcom/qcom-apq8074-dragonboard.dts
+++ b/src/arm/qcom/qcom-apq8074-dragonboard.dts
@@ -4,8 +4,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 
 /delete-node/ &mpss_region;
 
@@ -49,6 +49,33 @@
 			no-map;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_uart2 {
@@ -403,6 +430,10 @@
 	pinctrl-1 = <&sdc2_off>;
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	sdc1_on: sdc1-on-state {
 		clk-pins {
diff --git a/src/arm/qcom/qcom-apq8084-ifc6540.dts b/src/arm/qcom/qcom-apq8084-ifc6540.dts
index 116e59a..1df24c9 100644
--- a/src/arm/qcom/qcom-apq8084-ifc6540.dts
+++ b/src/arm/qcom/qcom-apq8084-ifc6540.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ8084/IFC6540";
diff --git a/src/arm/qcom/qcom-apq8084-mtp.dts b/src/arm/qcom/qcom-apq8084-mtp.dts
index c6b6680..d4e6aee 100644
--- a/src/arm/qcom/qcom-apq8084-mtp.dts
+++ b/src/arm/qcom/qcom-apq8084-mtp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ 8084-MTP";
diff --git a/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 468ebc4..374af6d 100644
--- a/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/src/arm/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -98,7 +98,7 @@
 			};
 		};
 
-		pci@40000000 {
+		pcie@40000000 {
 			status = "okay";
 			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
diff --git a/src/arm/qcom/qcom-ipq4019.dtsi b/src/arm/qcom/qcom-ipq4019.dtsi
index 9844e0b..f989bd7 100644
--- a/src/arm/qcom/qcom-ipq4019.dtsi
+++ b/src/arm/qcom/qcom-ipq4019.dtsi
@@ -224,7 +224,7 @@
 		};
 
 		sdhci: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -417,7 +417,7 @@
 			reg = <0x4ab000 0x4>;
 		};
 
-		pcie0: pci@40000000 {
+		pcie0: pcie@40000000 {
 			compatible = "qcom,pcie-ipq4019";
 			reg = <0x40000000 0xf1d>,
 			      <0x40000f20 0xa8>,
diff --git a/src/arm/qcom/qcom-ipq8064.dtsi b/src/arm/qcom/qcom-ipq8064.dtsi
index 6198f42..6a7f4dd 100644
--- a/src/arm/qcom/qcom-ipq8064.dtsi
+++ b/src/arm/qcom/qcom-ipq8064.dtsi
@@ -366,7 +366,7 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
@@ -1076,7 +1076,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@1b500000 {
+		pcie0: pcie@1b500000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b500000 0x1000
 			       0x1b502000 0x80
@@ -1127,7 +1127,7 @@
 			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie1: pci@1b700000 {
+		pcie1: pcie@1b700000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b700000 0x1000
 			       0x1b702000 0x80
@@ -1178,7 +1178,7 @@
 			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie2: pci@1b900000 {
+		pcie2: pcie@1b900000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b900000 0x1000
 			       0x1b902000 0x80
diff --git a/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
index b269fdc..e3b4b93 100644
--- a/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/src/arm/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -6,11 +6,11 @@
  * Author : Neil Armstrong <narmstrong@baylibre.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 #include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "MangOH Green with WP8548 Module";
diff --git a/src/arm/qcom/qcom-mdm9615-wp8548.dtsi b/src/arm/qcom/qcom-mdm9615-wp8548.dtsi
index 92c8003..0dd52ca 100644
--- a/src/arm/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/src/arm/qcom/qcom-mdm9615-wp8548.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
 
 / {
 	model = "Sierra Wireless WP8548 Module";
@@ -76,7 +77,11 @@
 	};
 };
 
-&pmicgpio {
+&pm8018 {
+	interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pm8018_gpio {
 	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
@@ -129,6 +134,142 @@
 	pinctrl-names = "default";
 };
 
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8018-regulators";
+
+		vin_lvs1-supply = <&pm8018_s3>;
+
+		vdd_l7-supply = <&pm8018_s4>;
+		vdd_l8-supply = <&pm8018_s3>;
+		vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+		/* Buck SMPS */
+		pm8018_s1: s1 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s2: s2 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s3: s3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s4: s4 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s5: s5 {
+			regulator-always-on;
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8018_l2: l2 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l3: l3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l4: l4 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8018_l5: l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8018_l8: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8018_l9: l9 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8018_l10: l10 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l11: l11 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l13: l13 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8018_l14: l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8018_lvs1: lvs1 {
+			bias-pull-down;
+		};
+	};
+};
+
 &sdcc1 {
 	status = "okay";
 };
diff --git a/src/arm/qcom/qcom-mdm9615.dtsi b/src/arm/qcom/qcom-mdm9615.dtsi
index 63e21aa2..34c6099 100644
--- a/src/arm/qcom/qcom-mdm9615.dtsi
+++ b/src/arm/qcom/qcom-mdm9615.dtsi
@@ -256,57 +256,10 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8018", "qcom,pm8921";
-				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pmicmpp: mpps@50 {
-					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pmicmpp 0 0 6>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pmicgpio: gpio@150 {
-					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pmicgpio 0 0 6>;
-					#gpio-cells = <2>;
-				};
-			};
 		};
 
 		sdcc1bam: dma-controller@12182000 {
@@ -383,140 +336,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8018-regulators";
-
-				vin_lvs1-supply = <&pm8018_s3>;
-
-				vdd_l7-supply = <&pm8018_s4>;
-				vdd_l8-supply = <&pm8018_s3>;
-				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
-				/* Buck SMPS */
-				pm8018_s1: s1 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s2: s2 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s3: s3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s4: s4 {
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s5: s5 {
-					regulator-always-on;
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8018_l2: l2 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l3: l3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l4: l4 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				pm8018_l5: l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l6: l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l7: l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8018_l8: l8 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8018_l9: l9 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8018_l10: l10 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l11: l11 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l12: l12 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l13: l13 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8018_l14: l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8018_lvs1: lvs1 {
-					bias-pull-down;
-				};
-			};
 		};
 	};
 };
diff --git a/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi b/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi
new file mode 100644
index 0000000..525d8c6
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for Microsoft MSM8x26-based Lumias
+ *
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+#include <dt-bindings/input/input.h>
+
+/*
+ * Delete all generic (msm8226.dtsi) reserved
+ * memory mappings which are different on these devices.
+ */
+/delete-node/ &smem_region;
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* microSD */
+		display0 = &framebuffer;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x3200000 0x800000>;
+			format = "a8r8g8b8";
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 4)>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	/*
+	 * This device being a WP platform has a different
+	 * memory layout than other Android based devices.
+	 * This smem memory region is directly copied from
+	 * the original UEFI firmware.
+	 */
+	reserved-memory {
+		display_reserved: framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		/* These values were taken from the original firmware DSDT */
+		pm8226_s1: s1 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2075000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio106", "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
diff --git a/src/arm/qcom/qcom-msm8226-microsoft-dempsey.dts b/src/arm/qcom/qcom-msm8226-microsoft-dempsey.dts
new file mode 100644
index 0000000..2c664b5
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8226-microsoft-dempsey.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640";
+	compatible = "microsoft,dempsey", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/src/arm/qcom/qcom-msm8226-microsoft-makepeace.dts b/src/arm/qcom/qcom-msm8226-microsoft-makepeace.dts
new file mode 100644
index 0000000..731c5c3
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8226-microsoft-makepeace.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640 XL";
+	compatible = "microsoft,makepeace", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/src/arm/qcom/qcom-msm8226-microsoft-moneypenny.dts b/src/arm/qcom/qcom-msm8226-microsoft-moneypenny.dts
new file mode 100644
index 0000000..992b711
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8226-microsoft-moneypenny.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Nokia Lumia 630";
+	compatible = "microsoft,moneypenny", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <480>;
+	height = <854>;
+	stride = <(480 * 4)>;
+};
diff --git a/src/arm/qcom/qcom-msm8226.dtsi b/src/arm/qcom/qcom-msm8226.dtsi
index 97a377b..b492c95 100644
--- a/src/arm/qcom/qcom-msm8226.dtsi
+++ b/src/arm/qcom/qcom-msm8226.dtsi
@@ -442,8 +442,8 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>;
 			clock-names = "xo",
 				      "mmss_gpll0_vote",
 				      "gpll0_vote",
@@ -875,8 +875,8 @@
 				offset = <0x65c>;
 
 				mode-bootloader = <0x77665500>;
-				mode-normal     = <0x77665501>;
-				mode-recovery   = <0x77665502>;
+				mode-normal = <0x77665501>;
+				mode-recovery = <0x77665502>;
 			};
 		};
 
@@ -1006,6 +1006,46 @@
 					      "ref";
 			};
 		};
+
+		gpu: adreno@fdb00000 {
+			compatible = "qcom,adreno-305.18", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-19000000 {
+					opp-hz = /bits/ 64 <19000000>;
+				};
+			};
+		};
 	};
 
 	thermal-zones {
diff --git a/src/arm/qcom/qcom-msm8660-surf.dts b/src/arm/qcom/qcom-msm8660-surf.dts
index be18f1b..69fe651 100644
--- a/src/arm/qcom/qcom-msm8660-surf.dts
+++ b/src/arm/qcom/qcom-msm8660-surf.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm MSM8660 SURF";
@@ -35,30 +36,42 @@
 };
 
 &pm8058 {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_FN_F1)
-			MATRIX_KEY(0, 1, KEY_UP)
-			MATRIX_KEY(0, 2, KEY_LEFT)
-			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
-			MATRIX_KEY(1, 0, KEY_FN_F2)
-			MATRIX_KEY(1, 1, KEY_RIGHT)
-			MATRIX_KEY(1, 2, KEY_DOWN)
-			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
-			MATRIX_KEY(2, 3, KEY_ENTER)
-			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(4, 1, KEY_UP)
-			MATRIX_KEY(4, 2, KEY_LEFT)
-			MATRIX_KEY(4, 3, KEY_HOME)
-			MATRIX_KEY(4, 4, KEY_FN_F3)
-			MATRIX_KEY(5, 0, KEY_CAMERA)
-			MATRIX_KEY(5, 1, KEY_RIGHT)
-			MATRIX_KEY(5, 2, KEY_DOWN)
-			MATRIX_KEY(5, 3, KEY_BACK)
-			MATRIX_KEY(5, 4, KEY_MENU)
-			>;
-		keypad,num-rows = <6>;
-		keypad,num-columns = <5>;
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_FN_F1)
+		MATRIX_KEY(0, 1, KEY_UP)
+		MATRIX_KEY(0, 2, KEY_LEFT)
+		MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(1, 0, KEY_FN_F2)
+		MATRIX_KEY(1, 1, KEY_RIGHT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+		MATRIX_KEY(2, 3, KEY_ENTER)
+		MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(4, 1, KEY_UP)
+		MATRIX_KEY(4, 2, KEY_LEFT)
+		MATRIX_KEY(4, 3, KEY_HOME)
+		MATRIX_KEY(4, 4, KEY_FN_F3)
+		MATRIX_KEY(5, 0, KEY_CAMERA)
+		MATRIX_KEY(5, 1, KEY_RIGHT)
+		MATRIX_KEY(5, 2, KEY_DOWN)
+		MATRIX_KEY(5, 3, KEY_BACK)
+		MATRIX_KEY(5, 4, KEY_MENU)
+		>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
+
+&rpm {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
 	};
 };
 
diff --git a/src/arm/qcom/qcom-msm8660.dtsi b/src/arm/qcom/qcom-msm8660.dtsi
index 78023ed..a7c245b 100644
--- a/src/arm/qcom/qcom-msm8660.dtsi
+++ b/src/arm/qcom/qcom-msm8660.dtsi
@@ -73,22 +73,6 @@
 		};
 	};
 
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -334,143 +318,10 @@
 			status = "disabled";
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8058: pmic {
-				compatible = "qcom,pm8058";
-				interrupt-parent = <&tlmm>;
-				interrupts = <88 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8058_gpio: gpio@150 {
-					compatible = "qcom,pm8058-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8058_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8058_mpps: mpps@50 {
-					compatible = "qcom,pm8058-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8058_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8058-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pm8058_keypad: keypad@148 {
-					compatible = "qcom,pm8058-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <74 1>, <75 1>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8058-adc";
-					reg = <0x197>;
-					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					ichg: adc-channel@3 {
-						reg = <0x00 0x03>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					ref_325mv: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-
-				rtc@1e8 {
-					compatible = "qcom,pm8058-rtc";
-					reg = <0x1e8>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <39 1>;
-					allow-set-time;
-				};
-
-				vibrator@4a {
-					compatible = "qcom,pm8058-vib";
-					reg = <0x4a>;
-				};
-
-				pm8058_led48: led@48 {
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					status = "disabled";
-				};
-
-				pm8058_led131: led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					status = "disabled";
-				};
-
-				pm8058_led132: led@132 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					status = "disabled";
-				};
-
-				pm8058_led133: led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					status = "disabled";
-				};
-
-			};
 		};
 
 		l2cc: clock-controller@2082000 {
@@ -496,72 +347,6 @@
 				clocks = <&pxo_board>;
 				clock-names = "pxo";
 			};
-
-			regulators-0 {
-				compatible = "qcom,rpm-pm8901-regulators";
-
-				pm8901_l0: l0 {};
-				pm8901_l1: l1 {};
-				pm8901_l2: l2 {};
-				pm8901_l3: l3 {};
-				pm8901_l4: l4 {};
-				pm8901_l5: l5 {};
-				pm8901_l6: l6 {};
-
-				/* S0 and S1 Handled as SAW regulators by SPM */
-				pm8901_s2: s2 {};
-				pm8901_s3: s3 {};
-				pm8901_s4: s4 {};
-
-				pm8901_lvs0: lvs0 {};
-				pm8901_lvs1: lvs1 {};
-				pm8901_lvs2: lvs2 {};
-				pm8901_lvs3: lvs3 {};
-
-				pm8901_mvs: mvs {};
-			};
-
-			regulators-1 {
-				compatible = "qcom,rpm-pm8058-regulators";
-
-				pm8058_l0: l0 {};
-				pm8058_l1: l1 {};
-				pm8058_l2: l2 {};
-				pm8058_l3: l3 {};
-				pm8058_l4: l4 {};
-				pm8058_l5: l5 {};
-				pm8058_l6: l6 {};
-				pm8058_l7: l7 {};
-				pm8058_l8: l8 {};
-				pm8058_l9: l9 {};
-				pm8058_l10: l10 {};
-				pm8058_l11: l11 {};
-				pm8058_l12: l12 {};
-				pm8058_l13: l13 {};
-				pm8058_l14: l14 {};
-				pm8058_l15: l15 {};
-				pm8058_l16: l16 {};
-				pm8058_l17: l17 {};
-				pm8058_l18: l18 {};
-				pm8058_l19: l19 {};
-				pm8058_l20: l20 {};
-				pm8058_l21: l21 {};
-				pm8058_l22: l22 {};
-				pm8058_l23: l23 {};
-				pm8058_l24: l24 {};
-				pm8058_l25: l25 {};
-
-				pm8058_s0: s0 {};
-				pm8058_s1: s1 {};
-				pm8058_s2: s2 {};
-				pm8058_s3: s3 {};
-				pm8058_s4: s4 {};
-
-				pm8058_lvs0: lvs0 {};
-				pm8058_lvs1: lvs1 {};
-
-				pm8058_ncp: ncp {};
-			};
 		};
 
 		amba {
diff --git a/src/arm/qcom/qcom-msm8926-htc-memul.dts b/src/arm/qcom/qcom-msm8926-htc-memul.dts
new file mode 100644
index 0000000..ed328b2
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8926-htc-memul.dts
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "HTC One Mini 2";
+	compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		unknown@5b00000 {
+			reg = <0x05b00000 0x200000>;
+			no-map;
+		};
+
+		unknown@7500000 {
+			reg = <0x07500000 0xb00000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x4f00000>;
+			no-map;
+		};
+
+		unknown@cf00000 {
+			reg = <0x0cf00000 0x200000>;
+			no-map;
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x3a000>;
+			no-map;
+		};
+
+		unknown@d13a000 {
+			reg = <0x0d13a000 0xc6000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0x650000>;
+			no-map;
+		};
+
+		unknown@d850000 {
+			reg = <0x0d850000 0x3b0000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1400000>;
+			no-map;
+		};
+
+		unknown@f000000 {
+			reg = <0x0f000000 0x500000>;
+			no-map;
+		};
+
+		venus_region: venus@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		unknown@fb00000 {
+			reg = <0x0fb00000 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/msm8926/memul/adsp.mbn";
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	magnetometer@d {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0x0d>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vid-supply = <&pm8226_l28>;
+	};
+
+	accelerometer@18 {
+		compatible = "bosch,bma250e";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_l28>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* TFA9887 @ 34 */
+	/* TFA9887 @ 35 */
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	/* NCP6924 Camera Regulators @ 10 */
+	/* PN544 NFC @ 28 */
+	/* TPS61310 Flash/Torch @ 33 */
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1750000>;
+	qcom,fast-charge-current-limit = <1750000>;
+	qcom,fast-charge-safe-voltage = <4360000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4300000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/src/arm/qcom/qcom-msm8926-microsoft-superman-lte.dts b/src/arm/qcom/qcom-msm8926-microsoft-superman-lte.dts
new file mode 100644
index 0000000..9b48661
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8926-microsoft-superman-lte.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c3 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 735";
+	compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
diff --git a/src/arm/qcom/qcom-msm8926-microsoft-tesla.dts b/src/arm/qcom/qcom-msm8926-microsoft-tesla.dts
new file mode 100644
index 0000000..53a6d4e
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8926-microsoft-tesla.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c1 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 830";
+	compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
+
+&gpio_keys {
+	key-camera-snapshot {
+		label = "Camera Snapshot";
+		gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key-camera-focus {
+		label = "Camera Focus";
+		gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+};
diff --git a/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts b/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644
index 0000000..0cbe2d2
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G 4G (2013)";
+	compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			/* Pull-up for I2C lines */
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/src/arm/qcom/qcom-msm8960-cdp.dts b/src/arm/qcom/qcom-msm8960-cdp.dts
index 6c1bc38..36f4c99 100644
--- a/src/arm/qcom/qcom-msm8960-cdp.dts
+++ b/src/arm/qcom/qcom-msm8960-cdp.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
 
 / {
 	model = "Qualcomm MSM8960 CDP";
@@ -88,17 +89,21 @@
 	};
 };
 
-&pmicintc {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(0, 3, KEY_CAMERA)
-			>;
-		keypad,num-rows = <1>;
-		keypad,num-columns = <5>;
-	};
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(0, 3, KEY_CAMERA)
+		>;
+	keypad,num-rows = <1>;
+	keypad,num-columns = <5>;
+
+	status = "okay";
 };
 
 &rpm {
diff --git a/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts b/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c2..1a51163 100644
--- a/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
 
 #include "qcom-msm8960.dtsi"
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include "pm8921.dtsi"
 
 / {
 	model = "Samsung Galaxy Express SGH-I437";
@@ -84,6 +85,10 @@
 	};
 };
 
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
 		compatible = "qcom,rpm-pm8921-regulators";
diff --git a/src/arm/qcom/qcom-msm8960.dtsi b/src/arm/qcom/qcom-msm8960.dtsi
index d13080f..f420740 100644
--- a/src/arm/qcom/qcom-msm8960.dtsi
+++ b/src/arm/qcom/qcom-msm8960.dtsi
@@ -200,10 +200,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-			};
 		};
 
 		acc0: clock-controller@2088000 {
@@ -259,49 +255,10 @@
 			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&msmgpio>;
-				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				keypad@148 {
-					compatible = "qcom,pm8921-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
-						     <75 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-			};
 		};
 
 		rng@1a500000 {
diff --git a/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 60bdfdd..4aaae85 100644
--- a/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -60,6 +60,33 @@
 		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -340,6 +367,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -347,6 +375,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
diff --git a/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 68a2f90..d34659e 100644
--- a/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/src/arm/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -65,6 +65,33 @@
 			pmsg-size = <0x80000>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -190,6 +217,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -197,6 +225,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -425,6 +454,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-msm8974.dtsi b/src/arm/qcom/qcom-msm8974.dtsi
index 0bc2e66..b141398 100644
--- a/src/arm/qcom/qcom-msm8974.dtsi
+++ b/src/arm/qcom/qcom-msm8974.dtsi
@@ -346,6 +346,20 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		saw_l2: power-controller@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -405,52 +419,46 @@
 			};
 		};
 
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
 		acc0: power-manager@f9088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw0: power-controller@f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc1: power-manager@f9098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw1: power-controller@f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc2: power-manager@f90a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw2: power-controller@f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc3: power-manager@f90b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw3: power-controller@f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -1063,6 +1071,15 @@
 			};
 		};
 
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8974";
 			#clock-cells = <1>;
@@ -1101,22 +1118,13 @@
 			};
 		};
 
-		bimc: interconnect@fc380000 {
-			reg = <0xfc380000 0x6a000>;
-			compatible = "qcom,msm8974-bimc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
 		snoc: interconnect@fc460000 {
 			reg = <0xfc460000 0x4000>;
 			compatible = "qcom,msm8974-snoc";
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		pnoc: interconnect@fc468000 {
@@ -1125,7 +1133,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		ocmemnoc: interconnect@fc470000 {
@@ -1134,7 +1142,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+				 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
 		};
 
 		mmssnoc: interconnect@fc478000 {
@@ -1143,7 +1151,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&mmcc MMSS_S0_AXI_CLK>,
-			         <&mmcc MMSS_S0_AXI_CLK>;
+				 <&mmcc MMSS_S0_AXI_CLK>;
 		};
 
 		cnoc: interconnect@fc480000 {
@@ -1152,7 +1160,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@fc4a9000 {
@@ -1633,13 +1641,6 @@
 					bias-pull-up;
 					drive-strength = <2>;
 				};
-
-				cd-pins {
-					pins = "gpio54";
-					function = "gpio";
-					bias-disable;
-					drive-strength = <2>;
-				};
 			};
 
 			blsp1_uart2_default: blsp1-uart2-default-state {
@@ -2408,31 +2409,4 @@
 			     <GIC_PPI 1 0xf08>;
 		clock-frequency = <19200000>;
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
 };
diff --git a/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts b/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 42d253b..fe227fd 100644
--- a/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ b/src/arm/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -57,6 +57,33 @@
 		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&pm8941_l18>;
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -381,6 +408,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts b/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 8230d0e..4c8edad 100644
--- a/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/src/arm/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
@@ -51,6 +51,33 @@
 			debounce-interval = <150>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c1 {
@@ -433,6 +460,10 @@
 	status = "okay";
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio68";
diff --git a/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts b/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
index 3e2c865..b93539e 100644
--- a/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/src/arm/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/leds/common.h>
@@ -155,7 +155,15 @@
 		enable-active-high;
 	};
 
-	/delete-node/ vreg-boost;
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -355,7 +363,6 @@
 		vddr-supply = <&vreg_panel>;
 
 		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
 		port {
 			panel_in: endpoint {
diff --git a/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 11468d1..ee94741 100644
--- a/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -84,6 +84,33 @@
 		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -297,6 +324,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -304,6 +332,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -558,6 +587,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/src/arm/qcom/qcom-sdx55-mtp.dts b/src/arm/qcom/qcom-sdx55-mtp.dts
index 7e97ad5..2470693 100644
--- a/src/arm/qcom/qcom-sdx55-mtp.dts
+++ b/src/arm/qcom/qcom-sdx55-mtp.dts
@@ -9,7 +9,7 @@
 #include "qcom-sdx55.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX55 MTP";
diff --git a/src/arm/qcom/qcom-sdx55-t55.dts b/src/arm/qcom/qcom-sdx55-t55.dts
index 51058b0..082f7ed 100644
--- a/src/arm/qcom/qcom-sdx55-t55.dts
+++ b/src/arm/qcom/qcom-sdx55-t55.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Thundercomm T55 Development Kit";
diff --git a/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts b/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts
index 8fadc6e..e336a15 100644
--- a/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts
+++ b/src/arm/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Telit FN980 TLB";
diff --git a/src/arm/qcom/qcom-sdx55.dtsi b/src/arm/qcom/qcom-sdx55.dtsi
index 2aa5089..27429d0 100644
--- a/src/arm/qcom/qcom-sdx55.dtsi
+++ b/src/arm/qcom/qcom-sdx55.dtsi
@@ -228,31 +228,26 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6200 0x170>,
-				      <0x00ff6400 0x200>,
-				      <0x00ff6800 0x800>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		mc_virt: interconnect@1100000 {
@@ -345,10 +340,10 @@
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
@@ -436,9 +431,9 @@
 			status = "disabled";
 		};
 
-		pcie_phy: phy@1c07000 {
+		pcie_phy: phy@1c06000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
-			reg = <0x01c07000 0x2000>;
+			reg = <0x01c06000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -585,10 +580,10 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -603,7 +598,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -612,7 +607,7 @@
 			compatible = "qcom,sdx55-pdc", "qcom,pdc";
 			reg = <0x0b210000 0x30000>;
 			qcom,pdc-ranges = <0 179 52>;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupt-controller;
 		};
diff --git a/src/arm/qcom/qcom-sdx65-mtp.dts b/src/arm/qcom/qcom-sdx65-mtp.dts
index 9649c85..07c10c8 100644
--- a/src/arm/qcom/qcom-sdx65-mtp.dts
+++ b/src/arm/qcom/qcom-sdx65-mtp.dts
@@ -12,7 +12,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>
 #include <arm64/qcom/pm7250b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include "pmx65.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX65 MTP";
diff --git a/src/arm/qcom/qcom-sdx65.dtsi b/src/arm/qcom/qcom-sdx65.dtsi
index e559ada..40591a4 100644
--- a/src/arm/qcom/qcom-sdx65.dtsi
+++ b/src/arm/qcom/qcom-sdx65.dtsi
@@ -204,8 +204,16 @@
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sdx65";
 			reg = <0x00100000 0x001f7400>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
-			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&pcie_phy>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk",
+				      "pcie_pipe_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
 			#power-domain-cells = <1>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -233,32 +241,27 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c8>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x2000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
 			status = "disabled";
 
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6e00 0x160>,
-				      <0x00ff7000 0x1ec>,
-				      <0x00ff6200 0x1e00>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
 		};
 
 		system_noc: interconnect@1620000 {
@@ -338,7 +341,7 @@
 			power-domains = <&gcc PCIE_GDSC>;
 
 			phys = <&pcie_phy>;
-			phy-names = "pcie-phy";
+			phy-names = "pciephy";
 
 			max-link-speed = <3>;
 			num-lanes = <2>;
@@ -520,7 +523,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -530,7 +533,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0xd00>,
 				<0xc600000 0x2000000>,
diff --git a/src/arm/renesas/iwg20d-q7-dbcm-ca.dtsi b/src/arm/renesas/iwg20d-q7-dbcm-ca.dtsi
index e10f992..de52218 100644
--- a/src/arm/renesas/iwg20d-q7-dbcm-ca.dtsi
+++ b/src/arm/renesas/iwg20d-q7-dbcm-ca.dtsi
@@ -27,6 +27,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &can1 {
@@ -69,6 +78,12 @@
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/src/arm/renesas/r8a7740-armadillo800eva.dts b/src/arm/renesas/r8a7740-armadillo800eva.dts
index d21e00e..e1ac2c1 100644
--- a/src/arm/renesas/r8a7740-armadillo800eva.dts
+++ b/src/arm/renesas/r8a7740-armadillo800eva.dts
@@ -132,7 +132,7 @@
 		i2c-gpio,delay-us = <5>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
@@ -143,6 +143,18 @@
 		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
 	};
 
+	panel {
+		compatible = "ampire,am-800480l1tmqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&reg_5p0v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdc0_rgb>;
+			};
+		};
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 
@@ -228,10 +240,22 @@
 	};
 };
 
-&pfc {
+&lcdc0 {
 	pinctrl-0 = <&lcd0_pins>;
 	pinctrl-names = "default";
 
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pfc {
 	ether_pins: ether {
 		groups = "gether_mii", "gether_int";
 		function = "gether";
diff --git a/src/arm/renesas/r8a7740.dtsi b/src/arm/renesas/r8a7740.dtsi
index 1b2cf5f..55884ec 100644
--- a/src/arm/renesas/r8a7740.dtsi
+++ b/src/arm/renesas/r8a7740.dtsi
@@ -398,6 +398,61 @@
 		status = "disabled";
 	};
 
+	lcdc0: lcd-controller@fe940000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe940000 0x4000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC0>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc0_rgb: endpoint {
+				};
+			};
+		};
+	};
+
+	lcdc1: lcd-controller@fe944000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe944000 0x4000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC1>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc1_rgb: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lcdc1_hdmi: endpoint {
+				};
+			};
+		};
+	};
+
 	tmu0: timer@fff80000 {
 		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
 		reg = <0xfff80000 0x2c>;
@@ -474,6 +529,16 @@
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
+		lcdlclk0_clk: lcdlclk0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		lcdlclk1_clk: lcdlclk1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
 
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
diff --git a/src/arm/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/src/arm/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index b1f679d..a0b5743 100644
--- a/src/arm/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/src/arm/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -34,6 +34,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &du {
@@ -81,6 +90,12 @@
 		clock-names = "cec";
 		pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/src/arm/renesas/r8a7745-iwg22d-sodimm.dts b/src/arm/renesas/r8a7745-iwg22d-sodimm.dts
index c105932..2441104 100644
--- a/src/arm/renesas/r8a7745-iwg22d-sodimm.dts
+++ b/src/arm/renesas/r8a7745-iwg22d-sodimm.dts
@@ -182,7 +182,7 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	stmpe811@44 {
+	port-expander@44 {
 		compatible = "st,stmpe811";
 		reg = <0x44>;
 		interrupt-parent = <&gpio4>;
@@ -197,7 +197,7 @@
 		/* internal ADC reference */
 		st,ref-sel = <0>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
diff --git a/src/arm/renesas/r8a7779-marzen.dts b/src/arm/renesas/r8a7779-marzen.dts
index 08ea149..9b13e8d 100644
--- a/src/arm/renesas/r8a7779-marzen.dts
+++ b/src/arm/renesas/r8a7779-marzen.dts
@@ -52,10 +52,10 @@
 		states = <3300000 1>, <1800000 0>;
 	};
 
-	keyboard-irq {
+	keypad-0 {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&keyboard_irq_pins>;
+		pinctrl-0 = <&keypad0_pins>;
 		pinctrl-names = "default";
 
 		interrupt-parent = <&gpio0>;
@@ -76,11 +76,11 @@
 		};
 	};
 
-	keyboard-gpio {
+	keypad-1 {
 		compatible = "gpio-keys-polled";
 		poll-interval = <50>;
 
-		pinctrl-0 = <&keyboard_gpio_pins>;
+		pinctrl-0 = <&keypad1_pins>;
 		pinctrl-names = "default";
 
 		key-3 {
@@ -193,7 +193,7 @@
 };
 
 &gpio0 {
-	keyboard-irq-hog {
+	keypad0-hog {
 		gpio-hog;
 		gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
 		input;
@@ -215,6 +215,35 @@
 };
 
 &lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
 	ethernet@18000000 {
 		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
@@ -266,6 +295,11 @@
 		};
 	};
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	scif2_pins: scif2 {
 		groups = "scif2_data_c";
 		function = "scif2";
@@ -286,11 +320,11 @@
 		function = "hspi0";
 	};
 
-	keyboard_irq_pins: keyboard-irq {
+	keypad0_pins: keypad-0 {
 		pins = "GP_0_17", "GP_0_18";
 		bias-pull-up;
 	};
-	keyboard_gpio_pins: keyboard-gpio {
+	keypad1_pins: keypad-1 {
 		pins = "GP_0_19", "GP_0_20";
 		bias-pull-up;
 	};
diff --git a/src/arm/renesas/r8a7790-lager.dts b/src/arm/renesas/r8a7790-lager.dts
index 4d666ad..8590981 100644
--- a/src/arm/renesas/r8a7790-lager.dts
+++ b/src/arm/renesas/r8a7790-lager.dts
@@ -122,6 +122,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -303,7 +312,7 @@
 	 *
 	 * IIC0/I2C0 does not appear to support fallback to GPIO.
 	 */
-	i2cexio0: i2c-10 {
+	i2cexio0: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic0>, <&i2c0>;
 		i2c-bus-name = "i2c-exio0";
@@ -316,7 +325,7 @@
 	 * This is similar to the arangement described for i2cexio0 (above)
 	 * with a fallback to GPIO also provided.
 	 */
-	i2cexio1: i2c-11 {
+	i2cexio1: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -328,7 +337,7 @@
 	 * IIC2 and I2C2 may be switched using pinmux.
 	 * A fallback to GPIO is also provided.
 	 */
-	i2chdmi: i2c-12 {
+	i2chdmi: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -361,6 +370,12 @@
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&fixedregulator1v8>;
+			dvdd-supply = <&fixedregulator1v8>;
+			pvdd-supply = <&fixedregulator1v8>;
+			dvdd-3v-supply = <&fixedregulator3v3>;
+			bgvdd-supply = <&fixedregulator1v8>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -417,7 +432,7 @@
 	 * IIC3 and I2C3 may be switched using pinmux.
 	 * IIC3/I2C3 does not appear to support fallback to GPIO.
 	 */
-	i2cpwr: i2c-13 {
+	i2cpwr: i2c-mux4 {
 		compatible = "i2c-demux-pinctrl";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins>;
@@ -432,6 +447,7 @@
 			interrupt-parent = <&irqc0>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			rtc {
 				compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7790-stout.dts b/src/arm/renesas/r8a7790-stout.dts
index fe14727..683f739 100644
--- a/src/arm/renesas/r8a7790-stout.dts
+++ b/src/arm/renesas/r8a7790-stout.dts
@@ -44,6 +44,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -296,6 +305,12 @@
 		clocks = <&osc4_clk>;
 		clock-names = "cec";
 
+		avdd-supply = <&fixedregulator1v8>;
+		dvdd-supply = <&fixedregulator1v8>;
+		pvdd-supply = <&fixedregulator1v8>;
+		dvdd-3v-supply = <&fixedregulator3v3>;
+		bgvdd-supply = <&fixedregulator1v8>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -332,6 +347,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/src/arm/renesas/r8a7791-koelsch.dts b/src/arm/renesas/r8a7791-koelsch.dts
index 545515b..0efd9f9 100644
--- a/src/arm/renesas/r8a7791-koelsch.dts
+++ b/src/arm/renesas/r8a7791-koelsch.dts
@@ -174,6 +174,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -340,7 +358,7 @@
 	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio1: i2c-12 {
+	i2cexio1: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -351,7 +369,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-13 {
+	i2chdmi: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -384,6 +402,12 @@
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -446,7 +470,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -795,6 +819,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7791-porter.dts b/src/arm/renesas/r8a7791-porter.dts
index ec0a20d..93c86e9 100644
--- a/src/arm/renesas/r8a7791-porter.dts
+++ b/src/arm/renesas/r8a7791-porter.dts
@@ -47,6 +47,24 @@
 		reg = <2 0x00000000 0 0x40000000>;
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -148,7 +166,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -179,6 +197,12 @@
 			interrupt-parent = <&gpio3>;
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -389,6 +413,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		watchdog {
 			compatible = "dlg,da9063-watchdog";
diff --git a/src/arm/renesas/r8a7792-blanche.dts b/src/arm/renesas/r8a7792-blanche.dts
index e793134..540a9ad 100644
--- a/src/arm/renesas/r8a7792-blanche.dts
+++ b/src/arm/renesas/r8a7792-blanche.dts
@@ -30,6 +30,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -182,6 +191,35 @@
 };
 
 &lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x00000000 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
 	ethernet@18000000 {
 		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
@@ -240,6 +278,11 @@
 		function = "du1";
 	};
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	keyboard_pins: keyboard {
 		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
 		bias-pull-up;
@@ -296,6 +339,12 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -332,6 +381,7 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7792-wheat.dts b/src/arm/renesas/r8a7792-wheat.dts
index f87e78f..000f21a 100644
--- a/src/arm/renesas/r8a7792-wheat.dts
+++ b/src/arm/renesas/r8a7792-wheat.dts
@@ -29,6 +29,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -254,6 +263,12 @@
 		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -283,6 +298,12 @@
 		reg = <0x39>, <0x49>, <0x29>, <0x59>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/src/arm/renesas/r8a7793-gose.dts b/src/arm/renesas/r8a7793-gose.dts
index 79b537b..1ea6c75 100644
--- a/src/arm/renesas/r8a7793-gose.dts
+++ b/src/arm/renesas/r8a7793-gose.dts
@@ -165,6 +165,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -324,7 +342,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -368,6 +386,12 @@
 			interrupt-parent = <&gpio3>;
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -430,7 +454,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-12 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -735,6 +759,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7794-alt.dts b/src/arm/renesas/r8a7794-alt.dts
index 08df031..b5ecafb 100644
--- a/src/arm/renesas/r8a7794-alt.dts
+++ b/src/arm/renesas/r8a7794-alt.dts
@@ -192,7 +192,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -222,7 +222,7 @@
 	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -453,6 +453,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/src/arm/renesas/r8a7794-silk.dts b/src/arm/renesas/r8a7794-silk.dts
index b7af1be..595e074 100644
--- a/src/arm/renesas/r8a7794-silk.dts
+++ b/src/arm/renesas/r8a7794-silk.dts
@@ -102,6 +102,15 @@
 		};
 	};
 
+	d1_8v: regulator-d1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-d3-3v {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -225,7 +234,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -256,6 +265,12 @@
 			interrupt-parent = <&gpio5>;
 			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
 
+			avdd-supply = <&d1_8v>;
+			dvdd-supply = <&d1_8v>;
+			pvdd-supply = <&d1_8v>;
+			dvdd-3v-supply = <&d3_3v>;
+			bgvdd-supply = <&d1_8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -424,6 +439,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/src/arm/renesas/r9a06g032.dtsi b/src/arm/renesas/r9a06g032.dtsi
index 0fa565a..fa63e1a 100644
--- a/src/arm/renesas/r9a06g032.dtsi
+++ b/src/arm/renesas/r9a06g032.dtsi
@@ -437,7 +437,7 @@
 		};
 
 		can0: can@52104000 {
-			compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
+			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
 			reg = <0x52104000 0x800>;
 			reg-io-width = <4>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/src/arm/rockchip/rk3036-kylin.dts b/src/arm/rockchip/rk3036-kylin.dts
index 67e1e04..e32c73d 100644
--- a/src/arm/rockchip/rk3036-kylin.dts
+++ b/src/arm/rockchip/rk3036-kylin.dts
@@ -8,11 +8,26 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x20000000>;
 	};
 
+	hdmi_con: hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
@@ -110,6 +125,12 @@
 	status = "okay";
 };
 
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
diff --git a/src/arm/rockchip/rk3036.dtsi b/src/arm/rockchip/rk3036.dtsi
index 78686fc..04af224 100644
--- a/src/arm/rockchip/rk3036.dtsi
+++ b/src/arm/rockchip/rk3036.dtsi
@@ -17,6 +17,9 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -282,7 +285,6 @@
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		rockchip,default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
 		dma-names = "rx-tx";
@@ -402,12 +404,20 @@
 		pinctrl-0 = <&hdmi_ctl>;
 		status = "disabled";
 
-		hdmi_in: port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			hdmi_in_vop: endpoint@0 {
+
+			hdmi_in: port@0 {
 				reg = <0>;
-				remote-endpoint = <&vop_out_hdmi>;
+
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
 			};
 		};
 	};
diff --git a/src/arm/rockchip/rk3066a.dtsi b/src/arm/rockchip/rk3066a.dtsi
index de9915d..30139f2 100644
--- a/src/arm/rockchip/rk3066a.dtsi
+++ b/src/arm/rockchip/rk3066a.dtsi
@@ -13,6 +13,11 @@
 / {
 	compatible = "rockchip,rk3066a";
 
+	aliases {
+		gpio4 = &gpio4;
+		gpio6 = &gpio6;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/src/arm/rockchip/rk3128-evb.dts b/src/arm/rockchip/rk3128-evb.dts
index c38f424..c7ab7fc 100644
--- a/src/arm/rockchip/rk3128-evb.dts
+++ b/src/arm/rockchip/rk3128-evb.dts
@@ -12,11 +12,6 @@
 	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		i2c1 = &i2c1;
 		mmc0 = &emmc;
 	};
 
diff --git a/src/arm/rockchip/rk3128-xpi-3128.dts b/src/arm/rockchip/rk3128-xpi-3128.dts
new file mode 100644
index 0000000..03a9788
--- /dev/null
+++ b/src/arm/rockchip/rk3128-xpi-3128.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3128.dtsi"
+
+/ {
+	model = "Geniatech XPI-3128";
+	compatible = "geniatech,xpi-3128", "rockchip,rk3128";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <3300000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	dc_5v: dc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * This is a vbus-supply, which also supplies the GL852G usb hub,
+	 * thus has to be always-on
+	 */
+	host_pwr_5v: host-pwr-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1500>;
+		regulator-name = "HOST_PWR_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_drv>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+		};
+
+		led-spd {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			/*
+			 * currently not allowed to be set as per
+			 * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml
+			 * and needs to set in userspace:
+			 *
+			 * linux,default-trigger = "netdev";
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&spd_led>;
+		};
+	};
+
+	mcu3v3: mcu3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "MCU3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_ddr: vcc-ddr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DDR";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_IO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_LAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: vcc-sd-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <500>;
+		regulator-name = "VCC_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc33_hdmi: vcc33-hdmi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC33_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcca_33>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcca_33: vcca-33-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCA_33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_11: vdd-11-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_11";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd11_hdmi: vdd11-hdmi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD11_HDMI";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vdd_11>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_arm: vdd-arm-regulator {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_ARM";
+		pwms = <&pwm1 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV.
+	 * Since there are HW blocks in PD_LOGIC (which are all driven by
+	 * this supply), that either do not have a driver at all or the
+	 * driver does not implement regulator support we have to make
+	 * sure here that the voltage never drops below 1050 mV.
+	 */
+	vdd_log: vdd-log-regulator {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_LOG";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-dutycycle-range = <30 100>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <4000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	vmmc-supply = <&vcc_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	cap-mmc-highspeed;
+	mmc-ddr-3_3v;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates= <50000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A0-A7 */
+			  "", "", "HEADER_5", "HEADER_3",
+			  "", "", "", "",
+			  /* GPIO0 B0-B7 */
+			  "HEADER_22", "HEADER_23", "", "HEADER_19",
+			  "HEADER_26", "HEADER_21", "HEADER_24", "",
+			  /* GPIO0 C0-C7 */
+			  "", "HEADER_18", "", "",
+			  "", "", "", "",
+			  /* GPIO0 D0-D7 */
+			  "HEADER_36", "", "", "",
+			  "", "", "HEADER_13", "";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A0-A7 */
+			  "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37",
+			  "HEADER_40", "HEADER_38", "", "",
+			  /* GPIO1 B0-B7 */
+			  "HEADER_11", "", "", "HEADER_29",
+			  "HEADER_31", "", "", "",
+			  /* GPIO1 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO1 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 C0-C7 */
+			  "", "", "", "",
+			  "HEADER_27", "", "", "",
+			  /* GPIO2 D0-D7 */
+			  "", "", "HEADER_8", "HEADER_10",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 C0-C7 */
+			  "", "HEADER_32", "", "",
+			  "", "", "", "HEADER_12",
+			  /* GPIO3 D0-D7 */
+			  "", "", "", "HEADER_15",
+			  "", "", "", "";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		max-speed = <100>;
+		/* T2.2.4 min. 1 us */
+		reset-assert-us = <10>;
+		/* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */
+		reset-deassert-us = <20>;
+		reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp83848c_rst>;
+	};
+};
+
+&pinctrl {
+	dp83848c {
+		dp83848c_rst: dp83848c-rst {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_int: ir-int {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		spd_led: spd-led {
+			rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		host_drv: host-drv {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	vmmc-supply = <&vcc_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	vusb_a-supply = <&vcc_io>;
+	vusb_d-supply = <&vdd_11>;
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
diff --git a/src/arm/rockchip/rk3128.dtsi b/src/arm/rockchip/rk3128.dtsi
index 01edf24..e2264c4 100644
--- a/src/arm/rockchip/rk3128.dtsi
+++ b/src/arm/rockchip/rk3128.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3128-power.h>
 
 / {
 	compatible = "rockchip,rk3128";
@@ -15,6 +16,20 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -100,6 +115,27 @@
 		};
 	};
 
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <975000 975000 1250000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1250000 1250000 1250000>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
@@ -130,11 +166,121 @@
 		};
 	};
 
+	gpu: gpu@10090000 {
+		compatible = "rockchip,rk3128-mali", "arm,mali-400";
+		reg = <0x10090000 0x10000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1";
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		operating-points-v2 = <&gpu_opp_table>;
+		resets = <&cru SRST_GPU>;
+		power-domains = <&power RK3128_PD_GPU>;
+		status = "disabled";
+	};
+
 	pmu: syscon@100a0000 {
 		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
 		reg = <0x100a0000 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3128-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RK3128_PD_VIO {
+				reg = <RK3128_PD_VIO>;
+				clocks = <&cru ACLK_CIF>,
+					 <&cru HCLK_CIF>,
+					 <&cru DCLK_EBC>,
+					 <&cru HCLK_EBC>,
+					 <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>,
+					 <&cru ACLK_LCDC0>,
+					 <&cru HCLK_LCDC0>,
+					 <&cru PCLK_MIPI>,
+					 <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>,
+					 <&cru ACLK_VIO0>,
+					 <&cru ACLK_VIO1>,
+					 <&cru HCLK_VIO>,
+					 <&cru HCLK_VIO_H2P>,
+					 <&cru DCLK_VOP>,
+					 <&cru SCLK_VOP>;
+				pm_qos = <&qos_ebc>,
+					 <&qos_iep>,
+					 <&qos_lcdc>,
+					 <&qos_rga>,
+					 <&qos_vip>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_VIDEO {
+				reg = <RK3128_PD_VIDEO>;
+				clocks = <&cru ACLK_VDPU>,
+					 <&cru HCLK_VDPU>,
+					 <&cru ACLK_VEPU>,
+					 <&cru HCLK_VEPU>,
+					 <&cru SCLK_HEVC_CORE>;
+				pm_qos = <&qos_vpu>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_GPU {
+				reg = <RK3128_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
 	};
 
+	qos_gpu: qos@1012d000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012d000 0x20>;
+	};
+
+	qos_vpu: qos@1012e000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012e000 0x20>;
+	};
+
+	qos_rga: qos@1012f000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f000 0x20>;
+	};
+
+	qos_ebc: qos@1012f080 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f080 0x20>;
+	};
+
+	qos_iep: qos@1012f100 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f100 0x20>;
+	};
+
+	qos_lcdc: qos@1012f180 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f180 0x20>;
+	};
+
+	qos_vip: qos@1012f200 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f200 0x20>;
+	};
+
 	gic: interrupt-controller@10139000 {
 		compatible = "arm,cortex-a7-gic";
 		reg = <0x10139000 0x1000>,
@@ -154,6 +300,9 @@
 		clocks = <&cru HCLK_OTG>;
 		clock-names = "otg";
 		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
 		phys = <&usb2phy_otg>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -163,6 +312,7 @@
 		compatible = "generic-ehci";
 		reg = <0x101c0000 0x20000>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
 		phys = <&usb2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -172,6 +322,7 @@
 		compatible = "generic-ohci";
 		reg = <0x101e0000 0x20000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
 		phys = <&usb2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -261,6 +412,8 @@
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
 			clock-output-names = "usb480m_phy";
+			assigned-clocks = <&cru SCLK_USB480M>;
+			assigned-clock-parents = <&usb2phy>;
 			#clock-cells = <0>;
 			status = "disabled";
 
@@ -518,6 +671,34 @@
 		#dma-cells = <1>;
 	};
 
+	gmac: ethernet@2008c000 {
+		compatible = "rockchip,rk3128-gmac";
+		reg = <0x2008c000 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_MAC>,
+			 <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			 <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>,
+			 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			      "mac_clk_rx", "mac_clk_tx",
+			      "clk_mac_ref", "clk_mac_refout",
+			      "aclk_mac", "pclk_mac";
+		resets = <&cru SRST_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		rx-fifo-depth = <4096>;
+		tx-fifo-depth = <2048>;
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3128-pinctrl";
 		rockchip,grf = <&grf>;
@@ -843,6 +1024,10 @@
 				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
 			};
 
+			sdmmc_det: sdmmc-det {
+				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
+			};
+
 			sdmmc_wp: sdmmc-wp {
 				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
 			};
diff --git a/src/arm/rockchip/rk322x.dtsi b/src/arm/rockchip/rk322x.dtsi
index a721744..831561f 100644
--- a/src/arm/rockchip/rk322x.dtsi
+++ b/src/arm/rockchip/rk322x.dtsi
@@ -15,6 +15,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
diff --git a/src/arm/rockchip/rk3288.dtsi b/src/arm/rockchip/rk3288.dtsi
index cb9cdad..ead343d 100644
--- a/src/arm/rockchip/rk3288.dtsi
+++ b/src/arm/rockchip/rk3288.dtsi
@@ -19,6 +19,15 @@
 
 	aliases {
 		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+		gpio8 = &gpio8;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/src/arm/rockchip/rk3xxx.dtsi b/src/arm/rockchip/rk3xxx.dtsi
index cb4e42e..f37137f 100644
--- a/src/arm/rockchip/rk3xxx.dtsi
+++ b/src/arm/rockchip/rk3xxx.dtsi
@@ -16,6 +16,10 @@
 
 	aliases {
 		ethernet0 = &emac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/src/arm/rockchip/rv1108.dtsi b/src/arm/rockchip/rv1108.dtsi
index abf3006..f3291f3 100644
--- a/src/arm/rockchip/rv1108.dtsi
+++ b/src/arm/rockchip/rv1108.dtsi
@@ -196,7 +196,6 @@
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +207,6 @@
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +218,6 @@
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +229,6 @@
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +382,6 @@
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +393,6 @@
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +404,6 @@
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +415,6 @@
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
diff --git a/src/arm/rockchip/rv1109-sonoff-ihost.dts b/src/arm/rockchip/rv1109-sonoff-ihost.dts
new file mode 100644
index 0000000..45dced8
--- /dev/null
+++ b/src/arm/rockchip/rv1109-sonoff-ihost.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 2G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1109";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git a/src/arm/rockchip/rv1109.dtsi b/src/arm/rockchip/rv1109.dtsi
new file mode 100644
index 0000000..9cbaa08
--- /dev/null
+++ b/src/arm/rockchip/rv1109.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rv1126.dtsi"
+
+/ {
+	compatible = "rockchip,rv1109";
+
+	cpus {
+		/delete-node/ cpu@f02;
+		/delete-node/ cpu@f03;
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/src/arm/rockchip/rv1126-edgeble-neu2-io.dts b/src/arm/rockchip/rv1126-edgeble-neu2-io.dts
index f09be84..0c2396b 100644
--- a/src/arm/rockchip/rv1126-edgeble-neu2-io.dts
+++ b/src/arm/rockchip/rv1126-edgeble-neu2-io.dts
@@ -61,7 +61,7 @@
 	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>;
 	tx_delay = <0x2a>;
 	rx_delay = <0x1a>;
 	status = "okay";
diff --git a/src/arm/rockchip/rv1126-pinctrl.dtsi b/src/arm/rockchip/rv1126-pinctrl.dtsi
index bb34b0c..06b1d7f 100644
--- a/src/arm/rockchip/rv1126-pinctrl.dtsi
+++ b/src/arm/rockchip/rv1126-pinctrl.dtsi
@@ -87,6 +87,16 @@
 				<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
 		};
 	};
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2_xfer: i2c2-xfer {
+			rockchip,pins =
+				/* i2c2_scl */
+				<0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>,
+				/* i2c2_sda */
+				<0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>;
+		};
+	};
 	pwm2 {
 		/omit-if-no-ref/
 		pwm2m0_pins: pwm2m0-pins {
@@ -105,36 +115,56 @@
 	};
 	rgmii {
 		/omit-if-no-ref/
-		rgmiim1_pins: rgmiim1-pins {
+		rgmiim1_miim: rgmiim1-miim {
 			rockchip,pins =
 				/* rgmii_mdc_m1 */
 				<2 RK_PC2 2 &pcfg_pull_none>,
 				/* rgmii_mdio_m1 */
-				<2 RK_PC1 2 &pcfg_pull_none>,
-				/* rgmii_rxclk_m1 */
-				<2 RK_PD3 2 &pcfg_pull_none>,
+				<2 RK_PC1 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_rxer: rgmiim1-rxer {
+			rockchip,pins =
+				/* rgmii_rxer_m1 */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus2: rgmiim1-bus2 {
+			rockchip,pins =
 				/* rgmii_rxd0_m1 */
 				<2 RK_PB5 2 &pcfg_pull_none>,
 				/* rgmii_rxd1_m1 */
 				<2 RK_PB6 2 &pcfg_pull_none>,
-				/* rgmii_rxd2_m1 */
-				<2 RK_PC7 2 &pcfg_pull_none>,
-				/* rgmii_rxd3_m1 */
-				<2 RK_PD0 2 &pcfg_pull_none>,
 				/* rgmii_rxdv_m1 */
 				<2 RK_PB4 2 &pcfg_pull_none>,
-				/* rgmii_txclk_m1 */
-				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd0_m1 */
 				<2 RK_PC3 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd1_m1 */
 				<2 RK_PC4 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txen_m1 */
+				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus4: rgmiim1-bus4 {
+			rockchip,pins =
+				/* rgmii_rxclk_m1 */
+				<2 RK_PD3 2 &pcfg_pull_none>,
+				/* rgmii_rxd2_m1 */
+				<2 RK_PC7 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m1 */
+				<2 RK_PD0 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m1 */
+				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd2_m1 */
 				<2 RK_PD1 2 &pcfg_pull_none_drv_level_3>,
 				/* rgmii_txd3_m1 */
-				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>,
-				/* rgmii_txen_m1 */
-				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_mclkinout: rgmiim1-mclkinout {
+			rockchip,pins =
+				/* rgmii_clk_m1 */
+				<2 RK_PB7 2 &pcfg_pull_none>;
 		};
 	};
 	sdmmc0 {
@@ -263,6 +293,14 @@
 				/* uart3_tx_m0 */
 				<3 RK_PC6 4 &pcfg_pull_up>;
 		};
+		/omit-if-no-ref/
+		uart3m2_xfer: uart3m2-xfer {
+			rockchip,pins =
+				/* uart3_rx_m2 */
+				<3 RK_PA1 4 &pcfg_pull_up>,
+				/* uart3_tx_m2 */
+				<3 RK_PA0 4 &pcfg_pull_up>;
+		};
 	};
 	uart4 {
 		/omit-if-no-ref/
@@ -273,6 +311,14 @@
 				/* uart4_tx_m0 */
 				<3 RK_PA4 4 &pcfg_pull_up>;
 		};
+		/omit-if-no-ref/
+		uart4m2_xfer: uart4m2-xfer {
+			rockchip,pins =
+				/* uart4_rx_m2 */
+				<1 RK_PD4 3 &pcfg_pull_up>,
+				/* uart4_tx_m2 */
+				<1 RK_PD5 3 &pcfg_pull_up>;
+		};
 	};
 	uart5 {
 		/omit-if-no-ref/
diff --git a/src/arm/rockchip/rv1126-sonoff-ihost.dts b/src/arm/rockchip/rv1126-sonoff-ihost.dts
new file mode 100644
index 0000000..77386a4
--- /dev/null
+++ b/src/arm/rockchip/rv1126-sonoff-ihost.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 4G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1126";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git a/src/arm/rockchip/rv1126-sonoff-ihost.dtsi b/src/arm/rockchip/rv1126-sonoff-ihost.dtsi
new file mode 100644
index 0000000..32b329e
--- /dev/null
+++ b/src/arm/rockchip/rv1126-sonoff-ihost.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_npu_vepu: DCDC_REG1 {
+				regulator-name = "vdd_npu_vepu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcc_0v8: LDO_REG1 {
+				regulator-name = "vcc_0v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG2 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd0v8_pmu: LDO_REG3 {
+				regulator-name = "vcc0v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <800000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_dovdd: LDO_REG5 {
+				regulator-name = "vcc_dovdd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_dvdd: LDO_REG6 {
+				regulator-name = "vcc_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_avdd: LDO_REG7 {
+				regulator-name = "vcc_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG9 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_5v0: SWITCH_REG1 {
+				regulator-name = "vcc_5v0";
+			};
+
+			vcc_3v3: SWITCH_REG2 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
+			  <&cru CLK_GMAC_TX_RX>;
+	assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
+				 <&cru RMII_MODE_CLK>;
+	assigned-clock-rates = <0>, <50000000>;
+	clock_in_out = "output";
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
+	status = "okay";
+};
+
+&mdio {
+	phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-active-low;
+		reset-assert-us = <50000>;
+		reset-deassert-us = <10000>;
+		reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vcc_1v8>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_dovdd>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_dovdd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
+		enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
+		host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3m2_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4m2_xfer>;
+	status = "okay";
+};
diff --git a/src/arm/rockchip/rv1126.dtsi b/src/arm/rockchip/rv1126.dtsi
index 9ccd1ba..bb603ca 100644
--- a/src/arm/rockchip/rv1126.dtsi
+++ b/src/arm/rockchip/rv1126.dtsi
@@ -21,6 +21,13 @@
 
 	aliases {
 		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
 	};
 
 	cpus {
@@ -231,6 +238,20 @@
 		status = "disabled";
 	};
 
+	i2c2: i2c@ff400000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff400000 0x1000>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,grf = <&pmugrf>;
+		clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	uart1: serial@ff410000 {
 		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
 		reg = <0xff410000 0x100>;
diff --git a/src/arm/samsung/exynos4.dtsi b/src/arm/samsung/exynos4.dtsi
index f775b93..7f981b5 100644
--- a/src/arm/samsung/exynos4.dtsi
+++ b/src/arm/samsung/exynos4.dtsi
@@ -203,16 +203,16 @@
 
 		camera: camera@11800000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0x11800000 0xa0000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			fimc_0: fimc@11800000 {
+			fimc_0: fimc@0 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11800000 0x1000>;
+				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC0>,
 					 <&clock CLK_SCLK_FIMC0>;
@@ -223,9 +223,9 @@
 				status = "disabled";
 			};
 
-			fimc_1: fimc@11810000 {
+			fimc_1: fimc@10000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11810000 0x1000>;
+				reg = <0x00010000 0x1000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC1>,
 					 <&clock CLK_SCLK_FIMC1>;
@@ -236,9 +236,9 @@
 				status = "disabled";
 			};
 
-			fimc_2: fimc@11820000 {
+			fimc_2: fimc@20000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11820000 0x1000>;
+				reg = <0x00020000 0x1000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC2>,
 					 <&clock CLK_SCLK_FIMC2>;
@@ -249,9 +249,9 @@
 				status = "disabled";
 			};
 
-			fimc_3: fimc@11830000 {
+			fimc_3: fimc@30000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11830000 0x1000>;
+				reg = <0x00030000 0x1000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC3>,
 					 <&clock CLK_SCLK_FIMC3>;
@@ -262,9 +262,9 @@
 				status = "disabled";
 			};
 
-			csis_0: csis@11880000 {
+			csis_0: csis@80000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11880000 0x4000>;
+				reg = <0x00080000 0x4000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS0>,
 					 <&clock CLK_SCLK_CSIS0>;
@@ -278,9 +278,9 @@
 				#size-cells = <0>;
 			};
 
-			csis_1: csis@11890000 {
+			csis_1: csis@90000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11890000 0x4000>;
+				reg = <0x00090000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS1>,
 					 <&clock CLK_SCLK_CSIS1>;
diff --git a/src/arm/samsung/exynos4210-i9100.dts b/src/arm/samsung/exynos4210-i9100.dts
index a9ec1f6..0d84957 100644
--- a/src/arm/samsung/exynos4210-i9100.dts
+++ b/src/arm/samsung/exynos4210-i9100.dts
@@ -184,6 +184,28 @@
 		};
 	};
 
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		touchscreen@20 {
+			compatible = "cypress,aries-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&gpl0>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+			vdd-supply = <&vtouchled_reg>;
+			vcc-supply = <&vtouch_reg>;
+			linux,keycodes = <KEY_MENU>, <KEY_BACK>;
+		};
+	};
+
 	spi-3 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -380,6 +402,23 @@
 	vusb_a-supply = <&vusbdac_reg>;
 };
 
+&i2c_1 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	lis3dh: accelerometer@19 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x19>;
+
+		mount-matrix = "0", "-1", "0",
+			       "1", "0", "0",
+			       "0", "0", "1";
+	};
+};
+
 &i2c_3 {
 	status = "okay";
 
@@ -513,7 +552,6 @@
 				regulator-name = "TOUCH_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 			};
 
 			vpll_reg: LDO10 {
@@ -527,6 +565,14 @@
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				/*
+				 * Force-enable this regulator; otherwise the
+				 * kernel hangs very early in the boot process
+				 * for about 12 seconds, without apparent
+				 * reason.
+				 */
+				regulator-always-on;
 			};
 
 			vcclcd_reg: LDO13 {
diff --git a/src/arm/samsung/exynos4212-tab3.dtsi b/src/arm/samsung/exynos4212-tab3.dtsi
index d7954ff..e5254e3 100644
--- a/src/arm/samsung/exynos4212-tab3.dtsi
+++ b/src/arm/samsung/exynos4212-tab3.dtsi
@@ -434,6 +434,7 @@
 };
 
 &fimd {
+	samsung,invert-vclk;
 	status = "okay";
 };
 
diff --git a/src/arm/samsung/exynos4x12.dtsi b/src/arm/samsung/exynos4x12.dtsi
index 84c1db2..b4b5e76 100644
--- a/src/arm/samsung/exynos4x12.dtsi
+++ b/src/arm/samsung/exynos4x12.dtsi
@@ -451,14 +451,15 @@
 };
 
 &camera {
+	ranges = <0x0 0x11800000 0xba1000>;
 	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
 		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
 	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
+	fimc_lite_0: fimc-lite@b90000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
+		reg = <0x00b90000 0x1000>;
 		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
@@ -467,9 +468,9 @@
 		status = "disabled";
 	};
 
-	fimc_lite_1: fimc-lite@123a0000 {
+	fimc_lite_1: fimc-lite@ba0000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123a0000 0x1000>;
+		reg = <0x00ba0000 0x1000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
@@ -478,9 +479,9 @@
 		status = "disabled";
 	};
 
-	fimc_is: fimc-is@12000000 {
+	fimc_is: fimc-is@800000 {
 		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
+		reg = <0x00800000 0x260000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
@@ -516,18 +517,15 @@
 		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
 			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
 		iommu-names = "isp", "drc", "fd", "mcuctl";
+		samsung,pmu-syscon = <&pmu_system_controller>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		status = "disabled";
 
-		pmu@10020000 {
-			reg = <0x10020000 0x3000>;
-		};
-
-		i2c1_isp: i2c-isp@12140000 {
+		i2c1_isp: i2c-isp@940000 {
 			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
+			reg = <0x00940000 0x100>;
 			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
 			clock-names = "i2c_isp";
 			#address-cells = <1>;
diff --git a/src/arm/samsung/s5pv210.dtsi b/src/arm/samsung/s5pv210.dtsi
index f7de5b5..ed560c9 100644
--- a/src/arm/samsung/s5pv210.dtsi
+++ b/src/arm/samsung/s5pv210.dtsi
@@ -549,17 +549,17 @@
 
 		camera: camera@fa600000 {
 			compatible = "samsung,fimc";
+			ranges = <0x0 0xfa600000 0xe01000>;
 			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
 			clock-names = "sclk_cam0", "sclk_cam1";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			csis0: csis@fa600000 {
+			csis0: csis@0 {
 				compatible = "samsung,s5pv210-csis";
-				reg = <0xfa600000 0x4000>;
+				reg = <0x00000000 0x4000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
@@ -572,9 +572,9 @@
 				#size-cells = <0>;
 			};
 
-			fimc0: fimc@fb200000 {
+			fimc0: fimc@c00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb200000 0x1000>;
+				reg = <0x00c00000 0x1000>;
 				interrupts = <5>;
 				interrupt-parent = <&vic2>;
 				clocks = <&clocks CLK_FIMC0>,
@@ -586,9 +586,9 @@
 				samsung,cam-if;
 			};
 
-			fimc1: fimc@fb300000 {
+			fimc1: fimc@d00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb300000 0x1000>;
+				reg = <0x00d00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <6>;
 				clocks = <&clocks CLK_FIMC1>,
@@ -602,9 +602,9 @@
 				samsung,lcd-wb;
 			};
 
-			fimc2: fimc@fb400000 {
+			fimc2: fimc@e00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb400000 0x1000>;
+				reg = <0x00e00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <7>;
 				clocks = <&clocks CLK_FIMC2>,
diff --git a/src/arm/st/ste-dbx5x0.dtsi b/src/arm/st/ste-dbx5x0.dtsi
index d5d8877..0f87abe 100644
--- a/src/arm/st/ste-dbx5x0.dtsi
+++ b/src/arm/st/ste-dbx5x0.dtsi
@@ -425,7 +425,7 @@
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
+			reg = <0x8012e000 0x80>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -440,7 +440,7 @@
 		gpio1: gpio@8012e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
+			reg = <0x8012e080 0x80>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -455,7 +455,7 @@
 		gpio2: gpio@8000e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
+			reg = <0x8000e000 0x80>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -470,7 +470,7 @@
 		gpio3: gpio@8000e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
+			reg = <0x8000e080 0x80>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -485,7 +485,7 @@
 		gpio4: gpio@8000e100 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
+			reg = <0x8000e100 0x80>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -500,7 +500,7 @@
 		gpio5: gpio@8000e180 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
+			reg = <0x8000e180 0x80>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -515,7 +515,7 @@
 		gpio6: gpio@8011e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
+			reg = <0x8011e000 0x80>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -530,7 +530,7 @@
 		gpio7: gpio@8011e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
+			reg = <0x8011e080 0x80>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -545,7 +545,7 @@
 		gpio8: gpio@a03fe000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
+			reg = <0xa03fe000 0x80>;
 			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/src/arm/st/ste-href-ab8500.dtsi b/src/arm/st/ste-href-ab8500.dtsi
index e1de9d3..5eeb44c 100644
--- a/src/arm/st/ste-href-ab8500.dtsi
+++ b/src/arm/st/ste-href-ab8500.dtsi
@@ -9,6 +9,54 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
 				gpio {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
diff --git a/src/arm/st/ste-href-ab8505.dtsi b/src/arm/st/ste-href-ab8505.dtsi
new file mode 100644
index 0000000..268db68
--- /dev/null
+++ b/src/arm/st/ste-href-ab8505.dtsi
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2023 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include "ste-ab8505.dtsi"
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
+				gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio4_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio12_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio16_default_mode>,
+						    <&gpio24_default_mode>,
+						    <&gpio25_default_mode>,
+						    <&gpio36_default_mode>,
+						    <&gpio37_default_mode>,
+						    <&gpio38_default_mode>,
+						    <&gpio39_default_mode>,
+						    <&gpio42_default_mode>,
+						    <&gpio26_default_mode>,
+						    <&gpio35_default_mode>,
+						    <&ycbcr_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi1_default_mode>,
+						    <&usbuicc_default_mode>,
+						    <&dmic_default_mode>,
+						    <&extcpena_default_mode>,
+						    <&modsclsda_default_mode>;
+
+					/*
+					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio2_a_1";
+							};
+							default_cfg {
+								pins = "GPIO2_T9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio4 {
+						gpio4_default_mode: gpio4_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio4_a_1";
+							};
+							default_cfg {
+								pins = "GPIO4_W2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio10_d_1";
+							};
+							default_cfg {
+								pins = "GPIO10_U17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio11_d_1";
+							};
+							default_cfg {
+								pins = "GPIO11_AA18";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio12 {
+						gpio12_default_mode: gpio12_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio12_d_1";
+							};
+							default_cfg {
+								pins = "GPIO12_U16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio13_d_1";
+							};
+							default_cfg {
+								pins = "GPIO13_W17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio16 {
+						gpio16_default_mode: gpio16_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio16_a_1";
+							};
+							default_cfg {
+								pins = "GPIO16_F15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio24 {
+						gpio24_default_mode: gpio24_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio24_a_1";
+							};
+							default_cfg {
+								pins = "GPIO24_T14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio25 {
+						gpio25_default_mode: gpio25_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio25_a_1";
+							};
+							default_cfg {
+								pins = "GPIO25_R16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio36 {
+						gpio36_default_mode: gpio36_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio36_a_1";
+							};
+							default_cfg {
+								pins = "GPIO36_A17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio37 {
+						gpio37_default_mode: gpio37_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio37_a_1";
+							};
+							default_cfg {
+								pins = "GPIO37_E15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio38 {
+						gpio38_default_mode: gpio38_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio38_a_1";
+							};
+							default_cfg {
+								pins = "GPIO38_C17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio39 {
+						gpio39_default_mode: gpio39_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio39_a_1";
+							};
+							default_cfg {
+								pins = "GPIO39_E16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio42 {
+						gpio42_default_mode: gpio42_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio42_a_1";
+							};
+							default_cfg {
+								pins = "GPIO42_U2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+					 */
+					gpio26 {
+						gpio26_default_mode: gpio26_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio26_d_1";
+							};
+							default_cfg {
+								pins = "GPIO26_M16";
+								output-low;
+							};
+						};
+					};
+					gpio35 {
+						gpio35_default_mode: gpio35_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio35_d_1";
+							};
+							default_cfg {
+								pins = "GPIO35_W15";
+								output-low;
+							};
+						};
+					};
+					/*
+					 * This sets up the YCBCR connector pins, i.e. analog video out.
+					 * Set as input with no bias.
+					 */
+					ycbcr {
+						ycbcr_default_mode: ycbcr_default {
+							default_mux {
+								function = "ycbcr";
+								groups = "ycbcr0123_d_1";
+							};
+							default_cfg {
+								pins = "GPIO6_Y18",
+									 "GPIO7_AA20",
+									 "GPIO8_W18",
+									 "GPIO9_AA19";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pins 14 and 15 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								function = "pwmout";
+								groups = "pwmout1_d_1", "pwmout2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO14_F14",
+									 "GPIO15_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 1 */
+					adi1 {
+						adi1_default_mode: adi1_default {
+							default_mux {
+								function = "adi1";
+								groups = "adi1_d_1";
+							};
+							default_cfg {
+								pins = "GPIO17_P5",
+									 "GPIO18_R5",
+									 "GPIO19_U5",
+									 "GPIO20_T5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the USB UICC pins */
+					usbuicc {
+						usbuicc_default_mode: usbuicc_default {
+							default_mux {
+								function = "usbuicc";
+								groups = "usbuicc_d_1";
+							};
+							default_cfg {
+								pins = "GPIO21_H19",
+									 "GPIO22_G20",
+									 "GPIO23_G19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the microphone pins */
+					dmic {
+						dmic_default_mode: dmic_default {
+							default_mux {
+								function = "dmic";
+								groups = "dmic12_d_1",
+									 "dmic34_d_1",
+									 "dmic56_d_1";
+							};
+							default_cfg {
+								pins = "GPIO27_J6",
+									 "GPIO28_K6",
+									 "GPIO29_G6",
+									 "GPIO30_H6",
+									 "GPIO31_F5",
+									 "GPIO32_G5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					extcpena {
+						extcpena_default_mode: extcpena_default {
+							default_mux {
+								function = "extcpena";
+								groups = "extcpena_d_1";
+							};
+							default_cfg {
+								pins = "GPIO34_R17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								function = "modsclsda";
+								groups = "modsclsda_d_1";
+							};
+							default_cfg {
+								pins = "GPIO40_T19",
+									"GPIO41_U19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio1_a_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio3_a_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+				/*
+				 * Charging is not working on the HREF unless an actual battery is
+				 * mounted, most HREFs have a DC cable in to the "battery power"
+				 * which means this will only be cofusing. So do not enable charging
+				 * of the HREFs.
+				 */
+				ab8500_fg {
+					status = "disabled";
+				};
+				ab8500_btemp {
+					status = "disabled";
+				};
+				ab8500_charger {
+					status = "disabled";
+				};
+				ab8500_chargalg {
+					status = "disabled";
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/st/ste-href.dtsi b/src/arm/st/ste-href.dtsi
index 13b11db..fbf0309 100644
--- a/src/arm/st/ste-href.dtsi
+++ b/src/arm/st/ste-href.dtsi
@@ -242,61 +242,6 @@
 			status = "okay";
 		};
 
-		prcmu@80157000 {
-			ab8500 {
-				gpio {
-				};
-
-				phy {
-					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&usb_a_1_default>;
-					pinctrl-1 = <&usb_a_1_sleep>;
-				};
-
-				regulator {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
 		pinctrl {
 			sdi0 {
 				sdi0_default_mode: sdi0_default {
diff --git a/src/arm/st/ste-href520-tvk.dts b/src/arm/st/ste-href520-tvk.dts
index 7f661f8..5677df4 100644
--- a/src/arm/st/ste-href520-tvk.dts
+++ b/src/arm/st/ste-href520-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8520.dtsi"
+#include "ste-href-ab8505.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r3.dtsi"
 
diff --git a/src/arm/st/ste-hrefprev60-stuib.dts b/src/arm/st/ste-hrefprev60-stuib.dts
index a29e345..b142bb2 100644
--- a/src/arm/st/ste-hrefprev60-stuib.dts
+++ b/src/arm/st/ste-hrefprev60-stuib.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-stuib.dtsi"
 
diff --git a/src/arm/st/ste-hrefprev60-tvk.dts b/src/arm/st/ste-hrefprev60-tvk.dts
index 1968bd1..5da1ff4 100644
--- a/src/arm/st/ste-hrefprev60-tvk.dts
+++ b/src/arm/st/ste-hrefprev60-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
diff --git a/src/arm/st/ste-hrefprev60.dtsi b/src/arm/st/ste-hrefprev60.dtsi
index 9859ee9..c87fd27 100644
--- a/src/arm/st/ste-hrefprev60.dtsi
+++ b/src/arm/st/ste-hrefprev60.dtsi
@@ -62,7 +62,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		pinctrl {
diff --git a/src/arm/st/ste-hrefv60plus-stuib.dts b/src/arm/st/ste-hrefv60plus-stuib.dts
index 7a5b6aa..c4abe24 100644
--- a/src/arm/st/ste-hrefv60plus-stuib.dts
+++ b/src/arm/st/ste-hrefv60plus-stuib.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-stuib.dtsi"
 
diff --git a/src/arm/st/ste-hrefv60plus-tvk.dts b/src/arm/st/ste-hrefv60plus-tvk.dts
index d5af3f3..f55e8de 100644
--- a/src/arm/st/ste-hrefv60plus-tvk.dts
+++ b/src/arm/st/ste-hrefv60plus-tvk.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
diff --git a/src/arm/st/ste-hrefv60plus.dtsi b/src/arm/st/ste-hrefv60plus.dtsi
index e66fa59..b23966c 100644
--- a/src/arm/st/ste-hrefv60plus.dtsi
+++ b/src/arm/st/ste-hrefv60plus.dtsi
@@ -3,7 +3,6 @@
  * Copyright 2012 ST-Ericsson AB
  */
 
-#include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
 / {
@@ -191,7 +190,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
+			cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
 		};
 
 		pinctrl {
diff --git a/src/arm/st/ste-nomadik-stn8815.dtsi b/src/arm/st/ste-nomadik-stn8815.dtsi
index 6816eef..4d37c5f 100644
--- a/src/arm/st/ste-nomadik-stn8815.dtsi
+++ b/src/arm/st/ste-nomadik-stn8815.dtsi
@@ -52,7 +52,7 @@
 
 	gpio0: gpio@101e4000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e4000 0x80>;
+		reg = <0x101e4000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <6>;
 		interrupt-controller;
@@ -66,7 +66,7 @@
 
 	gpio1: gpio@101e5000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e5000 0x80>;
+		reg = <0x101e5000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <7>;
 		interrupt-controller;
@@ -80,7 +80,7 @@
 
 	gpio2: gpio@101e6000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e6000 0x80>;
+		reg = <0x101e6000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <8>;
 		interrupt-controller;
@@ -94,7 +94,7 @@
 
 	gpio3: gpio@101e7000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e7000 0x80>;
+		reg = <0x101e7000 0x80>;
 		ngpio = <28>;
 		interrupt-parent = <&vica>;
 		interrupts = <9>;
diff --git a/src/arm/st/ste-snowball.dts b/src/arm/st/ste-snowball.dts
index 27c2ec5..1322abf 100644
--- a/src/arm/st/ste-snowball.dts
+++ b/src/arm/st/ste-snowball.dts
@@ -266,7 +266,7 @@
 			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			/* GPIO218 MMC_CD */
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
diff --git a/src/arm/st/ste-ux500-samsung-codina-tmo.dts b/src/arm/st/ste-ux500-samsung-codina-tmo.dts
index 463942a..c623cc3 100644
--- a/src/arm/st/ste-ux500-samsung-codina-tmo.dts
+++ b/src/arm/st/ste-ux500-samsung-codina-tmo.dts
@@ -310,7 +310,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/src/arm/st/ste-ux500-samsung-codina.dts b/src/arm/st/ste-ux500-samsung-codina.dts
index c1ae0e2..2355ca6 100644
--- a/src/arm/st/ste-ux500-samsung-codina.dts
+++ b/src/arm/st/ste-ux500-samsung-codina.dts
@@ -402,7 +402,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/src/arm/st/ste-ux500-samsung-gavini.dts b/src/arm/st/ste-ux500-samsung-gavini.dts
index b21e40d..ad9a20c 100644
--- a/src/arm/st/ste-ux500-samsung-gavini.dts
+++ b/src/arm/st/ste-ux500-samsung-gavini.dts
@@ -362,7 +362,7 @@
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
 			/* "flash detect" actually card detect */
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 
diff --git a/src/arm/st/ste-ux500-samsung-janice.dts b/src/arm/st/ste-ux500-samsung-janice.dts
index 6e586e8..229f7c3 100644
--- a/src/arm/st/ste-ux500-samsung-janice.dts
+++ b/src/arm/st/ste-ux500-samsung-janice.dts
@@ -412,7 +412,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/src/arm/st/ste-ux500-samsung-kyle.dts b/src/arm/st/ste-ux500-samsung-kyle.dts
index ba44210..cdb147d 100644
--- a/src/arm/st/ste-ux500-samsung-kyle.dts
+++ b/src/arm/st/ste-ux500-samsung-kyle.dts
@@ -238,7 +238,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_1_default>;
 			pinctrl-1 = <&mc0_a_1_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
diff --git a/src/arm/st/stm32429i-eval.dts b/src/arm/st/stm32429i-eval.dts
index 576235e..afa417b 100644
--- a/src/arm/st/stm32429i-eval.dts
+++ b/src/arm/st/stm32429i-eval.dts
@@ -222,7 +222,6 @@
 		reg = <0x42>;
 		interrupts = <8 3>;
 		interrupt-parent = <&gpioi>;
-		interrupt-controller;
 		wakeup-source;
 
 		stmpegpio: stmpe_gpio {
diff --git a/src/arm/st/stm32f469-disco.dts b/src/arm/st/stm32f469-disco.dts
index cbbd521..8a4f8dd 100644
--- a/src/arm/st/stm32f469-disco.dts
+++ b/src/arm/st/stm32f469-disco.dts
@@ -69,20 +69,13 @@
 		serial0 = &usart3;
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vdd_dsi: vdd-dsi {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_dsi";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -164,7 +157,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_dsi>;
+		power-supply = <&vcc_3v3>;
 		status = "okay";
 
 		port {
@@ -219,7 +212,7 @@
 
 &sdio {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain";
diff --git a/src/arm/st/stm32f746.dtsi b/src/arm/st/stm32f746.dtsi
index 53a8e2d..65c72b6 100644
--- a/src/arm/st/stm32f746.dtsi
+++ b/src/arm/st/stm32f746.dtsi
@@ -274,6 +274,26 @@
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
 		};
 
+		spi2: spi@40003800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003800 0x400>;
+			interrupts = <36>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>;
+			status = "disabled";
+		};
+
+		spi3: spi@40003c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003c00 0x400>;
+			interrupts = <51>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>;
+			status = "disabled";
+		};
+
 		usart2: serial@40004400 {
 			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
@@ -491,9 +511,30 @@
 			status = "disabled";
 		};
 
+		spi1: spi@40013000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013000 0x400>;
+			interrupts = <35>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>;
+			status = "disabled";
+		};
+
+		spi4: spi@40013400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013400 0x400>;
+			interrupts = <84>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>;
+			status = "disabled";
+		};
+
 		syscfg: syscon@40013800 {
 			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>;
 		};
 
 		exti: interrupt-controller@40013c00 {
@@ -554,6 +595,26 @@
 			};
 		};
 
+		spi5: spi@40015000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015000 0x400>;
+			interrupts = <85>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>;
+			status = "disabled";
+		};
+
+		spi6: spi@40015400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015400 0x400>;
+			interrupts = <86>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>;
+			status = "disabled";
+		};
+
 		ltdc: display-controller@40016800 {
 			compatible = "st,stm32-ltdc";
 			reg = <0x40016800 0x200>;
diff --git a/src/arm/st/stm32mp135.dtsi b/src/arm/st/stm32mp135.dtsi
index abf2acd..68d32f9 100644
--- a/src/arm/st/stm32mp135.dtsi
+++ b/src/arm/st/stm32mp135.dtsi
@@ -8,5 +8,16 @@
 
 / {
 	soc {
+		dcmipp: dcmipp@5a000000 {
+			compatible = "st,stm32mp13-dcmipp";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc DCMIPP_R>;
+			clocks = <&rcc DCMIPP_K>;
+			status = "disabled";
+
+			port {
+			};
+		};
 	};
 };
diff --git a/src/arm/st/stm32mp151.dtsi b/src/arm/st/stm32mp151.dtsi
index 6150891..fa4cbd3 100644
--- a/src/arm/st/stm32mp151.dtsi
+++ b/src/arm/st/stm32mp151.dtsi
@@ -1521,6 +1521,8 @@
 			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -1531,6 +1533,8 @@
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			companion = <&usbh_ohci>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
diff --git a/src/arm/st/stm32mp151a-prtt1l.dtsi b/src/arm/st/stm32mp151a-prtt1l.dtsi
index dd23de8..3938d35 100644
--- a/src/arm/st/stm32mp151a-prtt1l.dtsi
+++ b/src/arm/st/stm32mp151a-prtt1l.dtsi
@@ -206,8 +206,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp157a-dk1-scmi.dts b/src/arm/st/stm32mp157a-dk1-scmi.dts
index afcd628..ce59372 100644
--- a/src/arm/st/stm32mp157a-dk1-scmi.dts
+++ b/src/arm/st/stm32mp157a-dk1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
-	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -59,7 +59,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/src/arm/st/stm32mp157a-stinger96.dtsi b/src/arm/st/stm32mp157a-stinger96.dtsi
index 5f85598..5c1cc48 100644
--- a/src/arm/st/stm32mp157a-stinger96.dtsi
+++ b/src/arm/st/stm32mp157a-stinger96.dtsi
@@ -313,8 +313,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp157c-dk2-scmi.dts b/src/arm/st/stm32mp157c-dk2-scmi.dts
index 39358d9..c20a738 100644
--- a/src/arm/st/stm32mp157c-dk2-scmi.dts
+++ b/src/arm/st/stm32mp157c-dk2-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
-	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -65,7 +65,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/src/arm/st/stm32mp157c-dk2.dts b/src/arm/st/stm32mp157c-dk2.dts
index 510cca5..7a701f7 100644
--- a/src/arm/st/stm32mp157c-dk2.dts
+++ b/src/arm/st/stm32mp157c-dk2.dts
@@ -64,7 +64,6 @@
 		reg = <0x38>;
 		interrupts = <2 2>;
 		interrupt-parent = <&gpiof>;
-		interrupt-controller;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
 		status = "okay";
diff --git a/src/arm/st/stm32mp157c-ed1-scmi.dts b/src/arm/st/stm32mp157c-ed1-scmi.dts
index 07ea765..5e2eaf5 100644
--- a/src/arm/st/stm32mp157c-ed1-scmi.dts
+++ b/src/arm/st/stm32mp157c-ed1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
-	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -64,7 +64,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/src/arm/st/stm32mp157c-emstamp-argon.dtsi b/src/arm/st/stm32mp157c-emstamp-argon.dtsi
index f928cfb..4792004 100644
--- a/src/arm/st/stm32mp157c-emstamp-argon.dtsi
+++ b/src/arm/st/stm32mp157c-emstamp-argon.dtsi
@@ -500,14 +500,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp157c-ev1-scmi.dts b/src/arm/st/stm32mp157c-ev1-scmi.dts
index 813086e..3226fb9 100644
--- a/src/arm/st/stm32mp157c-ev1-scmi.dts
+++ b/src/arm/st/stm32mp157c-ev1-scmi.dts
@@ -11,8 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
-	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
-		     "st,stm32mp157";
+	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -70,7 +69,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &rcc {
diff --git a/src/arm/st/stm32mp157c-ev1.dts b/src/arm/st/stm32mp157c-ev1.dts
index cd9c3ff..9eb9a1b 100644
--- a/src/arm/st/stm32mp157c-ev1.dts
+++ b/src/arm/st/stm32mp157c-ev1.dts
@@ -362,7 +362,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/src/arm/st/stm32mp157c-osd32mp1-red.dts b/src/arm/st/stm32mp157c-osd32mp1-red.dts
index bd67a1d..527c33b 100644
--- a/src/arm/st/stm32mp157c-osd32mp1-red.dts
+++ b/src/arm/st/stm32mp157c-osd32mp1-red.dts
@@ -197,14 +197,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/src/arm/st/stm32mp157c-phycore-stm32mp15-som.dtsi
index 4e8b2d2..bf0c320 100644
--- a/src/arm/st/stm32mp157c-phycore-stm32mp15-som.dtsi
+++ b/src/arm/st/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -547,14 +547,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xc-lxa-tac.dtsi b/src/arm/st/stm32mp15xc-lxa-tac.dtsi
index f09b7c3..fc3a238 100644
--- a/src/arm/st/stm32mp15xc-lxa-tac.dtsi
+++ b/src/arm/st/stm32mp15xc-lxa-tac.dtsi
@@ -567,9 +567,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
-
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcom-drc02.dtsi b/src/arm/st/stm32mp15xx-dhcom-drc02.dtsi
index 35b1034..bb4f8a0 100644
--- a/src/arm/st/stm32mp15xx-dhcom-drc02.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -152,7 +152,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcom-pdk2.dtsi b/src/arm/st/stm32mp15xx-dhcom-pdk2.dtsi
index 46b87a2..466d970 100644
--- a/src/arm/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -305,7 +305,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcom-picoitx.dtsi b/src/arm/st/stm32mp15xx-dhcom-picoitx.dtsi
index abc5953..b5bc53acc 100644
--- a/src/arm/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -119,12 +119,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcor-avenger96.dtsi b/src/arm/st/stm32mp15xx-dhcor-avenger96.dtsi
index 0069ad7..343a461 100644
--- a/src/arm/st/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcor-avenger96.dtsi
@@ -489,8 +489,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcor-drc-compact.dtsi b/src/arm/st/stm32mp15xx-dhcor-drc-compact.dtsi
index 92d906b..bc4ddcb 100644
--- a/src/arm/st/stm32mp15xx-dhcor-drc-compact.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -312,12 +312,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dhcor-testbench.dtsi b/src/arm/st/stm32mp15xx-dhcor-testbench.dtsi
index ab7f0ba..6e79c4b 100644
--- a/src/arm/st/stm32mp15xx-dhcor-testbench.dtsi
+++ b/src/arm/st/stm32mp15xx-dhcor-testbench.dtsi
@@ -168,12 +168,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/src/arm/st/stm32mp15xx-dkx.dtsi b/src/arm/st/stm32mp15xx-dkx.dtsi
index 511113f..f7634c5 100644
--- a/src/arm/st/stm32mp15xx-dkx.dtsi
+++ b/src/arm/st/stm32mp15xx-dkx.dtsi
@@ -680,7 +680,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/src/arm/ti/keystone/keystone-k2e-netcp.dtsi b/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
index bff73a0..5c88a90 100644
--- a/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
@@ -36,9 +36,9 @@
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
diff --git a/src/arm/ti/keystone/keystone-k2g-evm.dts b/src/arm/ti/keystone/keystone-k2g-evm.dts
index 7bfc80f..f0ddbbc 100644
--- a/src/arm/ti/keystone/keystone-k2g-evm.dts
+++ b/src/arm/ti/keystone/keystone-k2g-evm.dts
@@ -9,7 +9,7 @@
 #include "keystone-k2g.dtsi"
 
 / {
-	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
+	compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
 	model = "Texas Instruments K2G General Purpose EVM";
 
 	memory@800000000 {
diff --git a/src/arm/ti/keystone/keystone-k2g-netcp.dtsi b/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
index f630693..7109ca0 100644
--- a/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
@@ -37,9 +37,9 @@
 		qpend {
 			qpend-0 {
 				qrange = <77 8>;
-				interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
-					     0 311 0xf04 0 312 0xf04 0 313 0xf04
-					     0 314 0xf04 0 315 0xf04>;
+				interrupts = <0 308 0xf04 0 309 0xf04 0 310 0xf04
+					      0 311 0xf04 0 312 0xf04 0 313 0xf04
+					      0 314 0xf04 0 315 0xf04>;
 				qalloc-by-id;
 			};
 		};
diff --git a/src/arm/ti/keystone/keystone-k2hk-evm.dts b/src/arm/ti/keystone/keystone-k2hk-evm.dts
index 206df8a..8dfb542 100644
--- a/src/arm/ti/keystone/keystone-k2hk-evm.dts
+++ b/src/arm/ti/keystone/keystone-k2hk-evm.dts
@@ -10,7 +10,7 @@
 #include "keystone-k2hk.dtsi"
 
 / {
-	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
+	compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
 
 	reserved-memory {
diff --git a/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi b/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
index 8a421c6..c2ee775 100644
--- a/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
@@ -49,9 +49,9 @@
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <8704 16>;
diff --git a/src/arm/ti/keystone/keystone-k2l-netcp.dtsi b/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
index 5ec6680..1afebd7 100644
--- a/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
@@ -36,9 +36,9 @@
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
diff --git a/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi b/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi
index b8730aa..a59331a 100644
--- a/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi
+++ b/src/arm/ti/omap/am335x-moxa-uc-2100-common.dtsi
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins>;
 
-	tpm_spi_tis@0 {
+	tpm@0 {
 		compatible = "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <500000>;
diff --git a/src/arm/ti/omap/am571x-idk.dts b/src/arm/ti/omap/am571x-idk.dts
index 4842502..322cf79 100644
--- a/src/arm/ti/omap/am571x-idk.dts
+++ b/src/arm/ti/omap/am571x-idk.dts
@@ -168,8 +168,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git a/src/arm/ti/omap/am5729-beagleboneai.dts b/src/arm/ti/omap/am5729-beagleboneai.dts
index 9a234dc..3e834fc 100644
--- a/src/arm/ti/omap/am5729-beagleboneai.dts
+++ b/src/arm/ti/omap/am5729-beagleboneai.dts
@@ -197,7 +197,7 @@
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
 		ti,enable-id-detection;
-		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -415,7 +415,6 @@
 		reg = <0x41>;
 		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
-		interrupt-controller;
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
diff --git a/src/arm/ti/omap/am572x-idk-common.dtsi b/src/arm/ti/omap/am572x-idk-common.dtsi
index 1d66278..3fca848 100644
--- a/src/arm/ti/omap/am572x-idk-common.dtsi
+++ b/src/arm/ti/omap/am572x-idk-common.dtsi
@@ -169,8 +169,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git a/src/arm/ti/omap/dra7-evm-common.dtsi b/src/arm/ti/omap/dra7-evm-common.dtsi
index 4cdffd6..ed5199d 100644
--- a/src/arm/ti/omap/dra7-evm-common.dtsi
+++ b/src/arm/ti/omap/dra7-evm-common.dtsi
@@ -15,12 +15,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	sound0: sound0 {
diff --git a/src/arm/ti/omap/dra71-evm.dts b/src/arm/ti/omap/dra71-evm.dts
index a643644..f747ac5 100644
--- a/src/arm/ti/omap/dra71-evm.dts
+++ b/src/arm/ti/omap/dra71-evm.dts
@@ -293,11 +293,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &ipu2 {
diff --git a/src/arm/ti/omap/dra72-evm-common.dtsi b/src/arm/ti/omap/dra72-evm-common.dtsi
index 31ab0c6..f8151c6 100644
--- a/src/arm/ti/omap/dra72-evm-common.dtsi
+++ b/src/arm/ti/omap/dra72-evm-common.dtsi
@@ -96,12 +96,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	hdmi0: connector {
diff --git a/src/arm/ti/omap/dra76-evm.dts b/src/arm/ti/omap/dra76-evm.dts
index 57868ac..cf9c3d3 100644
--- a/src/arm/ti/omap/dra76-evm.dts
+++ b/src/arm/ti/omap/dra76-evm.dts
@@ -533,11 +533,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &m_can0 {
diff --git a/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts b/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts
index 533ce7c..fbff15a 100644
--- a/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts
+++ b/src/arm/ti/omap/logicpd-torpedo-37xx-devkit.dts
@@ -52,7 +52,7 @@
 
 &uart2 {
 	/delete-property/dma-names;
-	bluetooth {
+	bluetooth-gnss {
 		compatible = "ti,wl1283-st";
 		enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
 		max-speed = <3000000>;
diff --git a/src/arm/ti/omap/motorola-mapphone-common.dtsi b/src/arm/ti/omap/motorola-mapphone-common.dtsi
index a2bb360..a0c53d9 100644
--- a/src/arm/ti/omap/motorola-mapphone-common.dtsi
+++ b/src/arm/ti/omap/motorola-mapphone-common.dtsi
@@ -6,15 +6,6 @@
 #include "motorola-cpcap-mapphone.dtsi"
 
 / {
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
 	/*
 	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
 	 * then 1023 - 1024 seems to contain mbm.
@@ -63,46 +54,6 @@
 		regulator-always-on;
 	};
 
-	/* FS USB Host PHY on port 1 for mdm6600 */
-	fsusb1_phy: usb-phy@1 {
-		compatible = "motorola,mapphone-mdm6600";
-		pinctrl-0 = <&usb_mdm6600_pins>;
-		pinctrl-1 = <&usb_mdm6600_sleep_pins>;
-		pinctrl-names = "default", "sleep";
-		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
-		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
-		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
-		/* mode: gpio_148 gpio_149 */
-		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
-				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
-		/* cmd: gpio_103 gpio_104 gpio_142 */
-		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
-				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
-				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
-		/* status: gpio_52 gpio_53 gpio_55 */
-		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
-					<&gpio2 21 GPIO_ACTIVE_HIGH>,
-					<&gpio2 23 GPIO_ACTIVE_HIGH>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB host TLL nop-phy on port 2 for w3glte */
-	hsusb2_phy: usb-phy@2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	/* LCD regulator from sw5 source */
-	lcd_regulator: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd";
-		regulator-min-microvolt = <5050000>;
-		regulator-max-microvolt = <5050000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
-		enable-active-high;
-		vin-supply = <&sw5>;
-	};
-
 	/* This is probably coming straight from the battery.. */
 	wl12xx_vmmc: regulator-wl12xx {
 		compatible = "regulator-fixed";
@@ -133,41 +84,6 @@
 
 		dais = <&mcbsp2_port>, <&mcbsp3_port>;
 	};
-
-	pwm8: pwm-8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: pwm-9 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <10000000>;
-	};
-
-	backlight: backlight {
-		compatible = "led-backlight";
-
-		leds = <&backlight_led>;
-		brightness-levels = <31 63 95 127 159 191 223 255>;
-		default-brightness-level = <6>;
-	};
 };
 
 &cpu_thermal {
@@ -197,57 +113,6 @@
 	status = "okay";
 };
 
-&dsi1 {
-	status = "okay";
-	vdd-supply = <&vcsi>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "motorola,droid4-panel", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-		vddi-supply = <&lcd_regulator>;
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-
-		backlight = <&backlight>;
-
-		width-mm = <50>;
-		height-mm = <89>;
-		rotation = <90>;
-
-		panel-timing {
-			clock-frequency = <0>;		/* Calculated by dsi */
-
-			hback-porch = <2>;
-			hactive = <540>;
-			hfront-porch = <0>;
-			hsync-len = <2>;
-
-			vback-porch = <1>;
-			vactive = <960>;
-			vfront-porch = <0>;
-			vsync-len = <1>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
 &hdmi {
 	status = "okay";
 	pinctrl-0 = <&dss_hdmi_pins>;
@@ -262,13 +127,6 @@
 	};
 };
 
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
-	pinctrl-0 = <&hdq_pins>;
-	pinctrl-names = "default";
-	ti,mode = "1w";
-};
-
 &i2c1 {
 	tmp105@48 {
 		compatible = "ti,tmp105";
@@ -322,34 +180,6 @@
 	};
 };
 
-&i2c2 {
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
-
-		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
-		/* gpio_183 with sys_nirq2 pad as wakeup */
-		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
-				      <&omap4_pmx_core 0x160>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-
-	isl29030@44 {
-		compatible = "isil,isl29030";
-		reg = <0x44>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&als_proximity_pins>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
-	};
-};
-
 &omap4_pmx_core {
 
 	/* hdmi_hpd.gpio_63 */
@@ -359,13 +189,6 @@
 		>;
 	};
 
-	hdq_pins: hdq-pins {
-		pinctrl-single,pins = <
-		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
-		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
 	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
 	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
@@ -427,73 +250,6 @@
 		>;
 	};
 
-	touchscreen_pins: touchscreen-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	als_proximity_pins: als-proximity-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_mdm6600_pins: usb-mdm6600-pins {
-		pinctrl-single,pins = <
-		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
-		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
-		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
-		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
-		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
-		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
-		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
-		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	/* Modem sleep pins to keep gpio_49 high with internal pull */
-	usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
 	usb_ulpi_pins: usb-ulpi-pins {
 		pinctrl-single,pins = <
 		OMAP4_IOPAD(0x196, MUX_MODE7)
@@ -601,18 +357,6 @@
 		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
 		>;
 	};
-
-	vibrator_direction_pin: vibrator-direction-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: vibrator-enable-pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
 };
 
 &omap4_pmx_wkup {
@@ -629,17 +373,6 @@
 	status = "disabled";
 };
 
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
-	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_32k_ck>;
-};
-
-&timer9 {
-	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_32k_ck>;
-};
-
 /*
  * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
  * for wake-up events for both the USB PHY and the UART. We can use gpio_149
@@ -672,20 +405,6 @@
 	};
 };
 
-&usbhsohci {
-	phys = <&fsusb1_phy>;
-	phy-names = "usb";
-};
-
-&usbhsehci {
-	phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
-	port1-mode = "ohci-phy-4pin-dpdm";
-	port2-mode = "ehci-tll";
-};
-
 /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
 &usb_otg_hs {
 	interface-type = <1>;
@@ -698,23 +417,6 @@
 	power = <150>;
 };
 
-&i2c4 {
-	ak8975: magnetometer@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-
-		vdd-supply = <&vhvio>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
-		rotation-matrix = "-1", "0", "0",
-				  "0", "1", "0",
-				  "0", "0", "-1";
-
-	};
-};
-
 &mcbsp2 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
diff --git a/src/arm/ti/omap/motorola-mapphone-handset.dtsi b/src/arm/ti/omap/motorola-mapphone-handset.dtsi
new file mode 100644
index 0000000..f3f9ff0
--- /dev/null
+++ b/src/arm/ti/omap/motorola-mapphone-handset.dtsi
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+	/* FS USB Host PHY on port 1 for mdm6600 */
+	fsusb1_phy: usb-phy@1 {
+		compatible = "motorola,mapphone-mdm6600";
+		pinctrl-0 = <&usb_mdm6600_pins>;
+		pinctrl-1 = <&usb_mdm6600_sleep_pins>;
+		pinctrl-names = "default", "sleep";
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
+		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
+		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
+		/* mode: gpio_148 gpio_149 */
+		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
+		/* cmd: gpio_103 gpio_104 gpio_142 */
+		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
+				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
+		/* status: gpio_52 gpio_53 gpio_55 */
+		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+					<&gpio2 21 GPIO_ACTIVE_HIGH>,
+					<&gpio2 23 GPIO_ACTIVE_HIGH>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB host TLL nop-phy on port 2 for w3glte */
+	hsusb2_phy: usb-phy@2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	pwm8: pwm-8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_direction_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer8>;
+		ti,clock-source = <0x01>;
+	};
+
+	pwm9: pwm-9 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_enable_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x01>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+		pwm-names = "enable", "direction";
+		direction-duty-cycle-ns = <10000000>;
+	};
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
+&i2c2 {
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+		/* gpio_183 with sys_nirq2 pad as wakeup */
+		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+				      <&omap4_pmx_core 0x160>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+
+	isl29030@44 {
+		compatible = "isil,isl29030";
+		reg = <0x44>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&als_proximity_pins>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+	};
+};
+
+&omap4_pmx_core {
+	hdq_pins: hdq-pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/* kpd_row0.gpio_178 */
+	tmp105_irq: tmp105-irq-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_mdm6600_pins: usb-mdm6600-pins {
+		pinctrl-single,pins = <
+		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	/* Modem sleep pins to keep gpio_49 high with internal pull */
+	usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	als_proximity_pins: als-proximity-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	vibrator_direction_pin: vibrator-direction-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
+		>;
+	};
+
+	vibrator_enable_pin: vibrator-enable-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
+		>;
+	};
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&usbhsohci {
+	phys = <&fsusb1_phy>;
+	phy-names = "usb";
+};
+
+&usbhsehci {
+	phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+	port1-mode = "ohci-phy-4pin-dpdm";
+	port2-mode = "ehci-tll";
+};
+
+&i2c4 {
+	ak8975: magnetometer@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		vdd-supply = <&vhvio>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+		rotation-matrix = "-1", "0", "0",
+				  "0", "1", "0",
+				  "0", "0", "-1";
+
+	};
+};
diff --git a/src/arm/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/src/arm/ti/omap/motorola-mapphone-mz607-mz617.dtsi
new file mode 100644
index 0000000..a356b3a
--- /dev/null
+++ b/src/arm/ti/omap/motorola-mapphone-mz607-mz617.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>,
+		       <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>;
+};
+
+/*
+ * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel
+ * dtb. The regulator may not be wired even if a MMC cage is added though.
+ */
+&mmc1 {
+	vmmc-supply = <&vsimcard>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio_176 */
+};
diff --git a/src/arm/ti/omap/motorola-mapphone-xt8xx.dtsi b/src/arm/ti/omap/motorola-mapphone-xt8xx.dtsi
new file mode 100644
index 0000000..8b8de92
--- /dev/null
+++ b/src/arm/ti/omap/motorola-mapphone-xt8xx.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-handset.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+
+	/* LCD regulator from sw5 source */
+	lcd_regulator: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd";
+		regulator-min-microvolt = <5050000>;
+		regulator-max-microvolt = <5050000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
+		enable-active-high;
+		vin-supply = <&sw5>;
+	};
+};
+
+&dsi1 {
+	status = "okay";
+	vdd-supply = <&vcsi>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: panel@0 {
+		compatible = "motorola,droid4-panel", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd0";
+		vddi-supply = <&lcd_regulator>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+		backlight = <&backlight>;
+
+		width-mm = <50>;
+		height-mm = <89>;
+		rotation = <90>;
+
+		panel-timing {
+			clock-frequency = <0>;		/* Calculated by dsi */
+
+			hback-porch = <2>;
+			hactive = <540>;
+			hfront-porch = <0>;
+			hsync-len = <2>;
+
+			vback-porch = <1>;
+			vactive = <960>;
+			vfront-porch = <0>;
+			vsync-len = <1>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
diff --git a/src/arm/ti/omap/omap4-droid-bionic-xt875.dts b/src/arm/ti/omap/omap4-droid-bionic-xt875.dts
index ccf03a7..1d9000f 100644
--- a/src/arm/ti/omap/omap4-droid-bionic-xt875.dts
+++ b/src/arm/ti/omap/omap4-droid-bionic-xt875.dts
@@ -1,11 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
 	model = "Motorola Droid Bionic XT875";
 	compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
 };
 
 &keypad {
diff --git a/src/arm/ti/omap/omap4-droid4-xt894.dts b/src/arm/ti/omap/omap4-droid4-xt894.dts
index e833c21..cc3f3e1 100644
--- a/src/arm/ti/omap/omap4-droid4-xt894.dts
+++ b/src/arm/ti/omap/omap4-droid4-xt894.dts
@@ -1,9 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
+	model = "Motorola Droid 4 XT894";
+	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -33,11 +45,6 @@
 	};
 };
 
-/ {
-	model = "Motorola Droid 4 XT894";
-	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
-};
-
 &keypad {
 	keypad,num-rows = <8>;
 	keypad,num-columns = <8>;
diff --git a/src/arm/ti/omap/omap4-epson-embt2ws.dts b/src/arm/ti/omap/omap4-epson-embt2ws.dts
index 01d7838..24f7d02 100644
--- a/src/arm/ti/omap/omap4-epson-embt2ws.dts
+++ b/src/arm/ti/omap/omap4-epson-embt2ws.dts
@@ -51,6 +51,12 @@
 		regulator-name = "unknown";
 	};
 
+	wl12xx_pwrseq: wl12xx-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
+
        /* regulator for wl12xx on sdio2 */
 	wl12xx_vmmc: wl12xx-vmmc {
 		pinctrl-names = "default";
@@ -74,6 +80,7 @@
 	twl: pmic@48 {
 		compatible = "ti,twl6032";
 		reg = <0x48>;
+		#clock-cells = <1>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 		interrupt-controller;
@@ -294,6 +301,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&wl12xx_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
+	mmc-pwrseq = <&wl12xx_pwrseq>;
 	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core 0x12e>;
 	non-removable;
@@ -454,10 +462,12 @@
 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART2_RX>;
 
-	/*
-	 * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic
-	 * which does not have a driver
-	 */
+	bluetooth-gnss {
+		compatible = "ti,wl1283-st";
+		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;	/* GPIO_25 */
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
 };
 
 &uart3 {
diff --git a/src/arm/ti/omap/omap4-xyboard-mz609.dts b/src/arm/ti/omap/omap4-xyboard-mz609.dts
new file mode 100644
index 0000000..762934e
--- /dev/null
+++ b/src/arm/ti/omap/omap4-xyboard-mz609.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ609";
+	compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&i2c1 {
+	led-controller@38 {
+		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x38>;
+
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
+
+		backlight_led: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = ":backlight";
+		};
+	};
+};
diff --git a/src/arm/ti/omap/omap4-xyboard-mz617.dts b/src/arm/ti/omap/omap4-xyboard-mz617.dts
new file mode 100644
index 0000000..b9caea3
--- /dev/null
+++ b/src/arm/ti/omap/omap4-xyboard-mz617.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ617";
+	compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+};
diff --git a/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts b/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts
new file mode 100644
index 0000000..21ca197
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi Zero 2W";
+	compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* SY8089 DC/DC converter */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on the FPC connector (or the exansion board) */
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL and DRAM */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts b/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
new file mode 100644
index 0000000..8ea1fd4
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Transpeed 8K618-T";
+	compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* discrete 3.3V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dldo1>;
+	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-1v8-pll";
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-io-mmc";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/src/arm64/altera/socfpga_stratix10.dtsi b/src/arm64/altera/socfpga_stratix10.dtsi
index 439497a..072fe20 100644
--- a/src/arm64/altera/socfpga_stratix10.dtsi
+++ b/src/arm64/altera/socfpga_stratix10.dtsi
@@ -59,6 +59,25 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,stratix10-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,stratix10-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <0 170 4>,
@@ -125,7 +144,7 @@
 		};
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -133,13 +152,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,stratix10-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -510,6 +522,7 @@
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			clock-names = "otg";
 			iommus = <&smmu 7>;
 			status = "disabled";
 		};
@@ -620,18 +633,6 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,stratix10-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,stratix10-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 
 	usbphy0: usbphy0 {
diff --git a/src/arm64/altera/socfpga_stratix10_socdk.dts b/src/arm64/altera/socfpga_stratix10_socdk.dts
index 468fcc7..26173f0 100644
--- a/src/arm64/altera/socfpga_stratix10_socdk.dts
+++ b/src/arm64/altera/socfpga_stratix10_socdk.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -66,14 +66,14 @@
 };
 
 &pinctrl0 {
-	i2c1_pmx_func: i2c1-pmx-func {
+	i2c1_pmx_func: i2c1-pmx-func-pins {
 		pinctrl-single,pins = <
 			0x78   0x4   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x4   /* I2C1_SCL (IO7-B) PIN31SEL */
 		>;
 	};
 
-	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio {
+	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins {
 		pinctrl-single,pins = <
 			0x78   0x8   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x8   /* I2C1_SCL (IO7-B) PIN31SEL */
@@ -187,8 +187,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm64/altera/socfpga_stratix10_socdk_nand.dts b/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
index 532164a..81d0e91 100644
--- a/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
+++ b/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -102,7 +102,7 @@
 &nand {
 	status = "okay";
 
-	flash@0 {
+	nand@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -176,8 +176,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm64/altera/socfpga_stratix10_swvp.dts b/src/arm64/altera/socfpga_stratix10_swvp.dts
index ff413f8..0d837d3 100644
--- a/src/arm64/altera/socfpga_stratix10_swvp.dts
+++ b/src/arm64/altera/socfpga_stratix10_swvp.dts
@@ -80,8 +80,6 @@
 
 &mmc {
 	status = "okay";
-	altr,dw-mshc-ciu-div = <0x3>;
-	altr,dw-mshc-sdr-timing = <0x0 0x3>;
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	broken-cd;
diff --git a/src/arm64/amazon/alpine-v2.dtsi b/src/arm64/amazon/alpine-v2.dtsi
index dccbba6..dbf2dce 100644
--- a/src/arm64/amazon/alpine-v2.dtsi
+++ b/src/arm64/amazon/alpine-v2.dtsi
@@ -145,7 +145,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;
diff --git a/src/arm64/amazon/alpine-v3.dtsi b/src/arm64/amazon/alpine-v3.dtsi
index 39481d7..3ea178a 100644
--- a/src/arm64/amazon/alpine-v3.dtsi
+++ b/src/arm64/amazon/alpine-v3.dtsi
@@ -355,7 +355,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;
diff --git a/src/arm64/amlogic/amlogic-c3.dtsi b/src/arm64/amlogic/amlogic-c3.dtsi
index 998f505..2ad1f8e 100644
--- a/src/arm64/amlogic/amlogic-c3.dtsi
+++ b/src/arm64/amlogic/amlogic-c3.dtsi
@@ -81,6 +81,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			watchdog@2100 {
+				compatible = "amlogic,c3-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,c3-periphs-pinctrl";
 				#address-cells = <2>;
diff --git a/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
index 0062667..8a18ce9 100644
--- a/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
+++ b/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -30,8 +30,20 @@
 &uart_B {
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
index c2d22b0..c356bd2 100644
--- a/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
+++ b/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -25,3 +25,15 @@
 &sd_emmc_b {
 	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/src/arm64/amlogic/meson-axg-s400.dts b/src/arm64/amlogic/meson-axg-s400.dts
index df16eea..c890566 100644
--- a/src/arm64/amlogic/meson-axg-s400.dts
+++ b/src/arm64/amlogic/meson-axg-s400.dts
@@ -66,7 +66,6 @@
 		VDDA-supply = <&vcc_3v3>;
 		VDDP-supply = <&vcc_3v3>;
 		VDDD-supply = <&vcc_3v3>;
-		status = "okay";
 		sound-name-prefix = "Linein";
 	};
 
@@ -75,14 +74,12 @@
 		compatible = "everest,es7154";
 		VDD-supply = <&vcc_3v3>;
 		PVDD-supply = <&vcc_5v>;
-		status = "okay";
 		sound-name-prefix = "Lineout";
 	};
 
 	spdif_dit: audio-codec-2 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -91,14 +88,12 @@
 		compatible = "dmic-codec";
 		num-channels = <7>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
 	spdif_dir: audio-codec-4 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dir";
-		status = "okay";
 		sound-name-prefix = "DIR";
 	};
 
diff --git a/src/arm64/amlogic/meson-axg.dtsi b/src/arm64/amlogic/meson-axg.dtsi
index a49aa62..7e5ac9d 100644
--- a/src/arm64/amlogic/meson-axg.dtsi
+++ b/src/arm64/amlogic/meson-axg.dtsi
@@ -432,6 +432,27 @@
 					};
 				};
 
+				nand_all_pins: nand-all-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+						bias-pull-up;
+					};
+				};
+
 				emmc_ds_pins: emmc_ds {
 					mux {
 						groups = "emmc_ds";
@@ -1913,6 +1934,8 @@
 				reg = <0x0 0x7800 0x0 0x100>,
 				      <0x0 0x7000 0x0 0x800>;
 				reg-names = "nfc", "emmc";
+				pinctrl-0 = <&nand_all_pins>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
diff --git a/src/arm64/amlogic/meson-g12a-sei510.dts b/src/arm64/amlogic/meson-g12a-sei510.dts
index 0ad0c2b..4c4550d 100644
--- a/src/arm64/amlogic/meson-g12a-sei510.dts
+++ b/src/arm64/amlogic/meson-g12a-sei510.dts
@@ -45,7 +45,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
diff --git a/src/arm64/amlogic/meson-g12a-x96-max.dts b/src/arm64/amlogic/meson-g12a-x96-max.dts
index 4969a76..9b55982 100644
--- a/src/arm64/amlogic/meson-g12a-x96-max.dts
+++ b/src/arm64/amlogic/meson-g12a-x96-max.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-g12b-bananapi-cm4.dtsi b/src/arm64/amlogic/meson-g12b-bananapi-cm4.dtsi
index 995ce10..08c33ec 100644
--- a/src/arm64/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/src/arm64/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -369,7 +369,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm64/amlogic/meson-g12b-bananapi.dtsi b/src/arm64/amlogic/meson-g12b-bananapi.dtsi
index 0a6a128..4b8db87 100644
--- a/src/arm64/amlogic/meson-g12b-bananapi.dtsi
+++ b/src/arm64/amlogic/meson-g12b-bananapi.dtsi
@@ -487,7 +487,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/src/arm64/amlogic/meson-g12b-gtking.dts b/src/arm64/amlogic/meson-g12b-gtking.dts
index 8fc2e14..0da386c 100644
--- a/src/arm64/amlogic/meson-g12b-gtking.dts
+++ b/src/arm64/amlogic/meson-g12b-gtking.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-g12b-ugoos-am6.dts b/src/arm64/amlogic/meson-g12b-ugoos-am6.dts
index ce548b3..6396f19 100644
--- a/src/arm64/amlogic/meson-g12b-ugoos-am6.dts
+++ b/src/arm64/amlogic/meson-g12b-ugoos-am6.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi b/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
index 18f7b73..e59c3c9 100644
--- a/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
@@ -26,7 +26,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-gxbb-kii-pro.dts b/src/arm64/amlogic/meson-gxbb-kii-pro.dts
index e238f1f..f28452b 100644
--- a/src/arm64/amlogic/meson-gxbb-kii-pro.dts
+++ b/src/arm64/amlogic/meson-gxbb-kii-pro.dts
@@ -18,7 +18,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-gxbb-p200.dts b/src/arm64/amlogic/meson-gxbb-p200.dts
index 292c718..591455c 100644
--- a/src/arm64/amlogic/meson-gxbb-p200.dts
+++ b/src/arm64/amlogic/meson-gxbb-p200.dts
@@ -18,7 +18,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi
index e830308..74df325 100644
--- a/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi
@@ -21,7 +21,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-gxbb-wetek-play2.dts b/src/arm64/amlogic/meson-gxbb-wetek-play2.dts
index e1b74b1..376760d 100644
--- a/src/arm64/amlogic/meson-gxbb-wetek-play2.dts
+++ b/src/arm64/amlogic/meson-gxbb-wetek-play2.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-gxm-nexbox-a1.dts b/src/arm64/amlogic/meson-gxm-nexbox-a1.dts
index 7d525bd..ad2dd4a 100644
--- a/src/arm64/amlogic/meson-gxm-nexbox-a1.dts
+++ b/src/arm64/amlogic/meson-gxm-nexbox-a1.dts
@@ -28,7 +28,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-gxm-rbox-pro.dts b/src/arm64/amlogic/meson-gxm-rbox-pro.dts
index 50d49ae..d05dde8 100644
--- a/src/arm64/amlogic/meson-gxm-rbox-pro.dts
+++ b/src/arm64/amlogic/meson-gxm-rbox-pro.dts
@@ -37,7 +37,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/src/arm64/amlogic/meson-s4-s805x2-aq222.dts b/src/arm64/amlogic/meson-s4-s805x2-aq222.dts
index c1f322c..983cadd 100644
--- a/src/arm64/amlogic/meson-s4-s805x2-aq222.dts
+++ b/src/arm64/amlogic/meson-s4-s805x2-aq222.dts
@@ -15,7 +15,7 @@
 	#size-cells = <2>;
 
 	aliases {
-		serial0 = &uart_B;
+		serial0 = &uart_b;
 	};
 
 	memory@0 {
@@ -23,9 +23,20 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 52 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x3400000>;
+			no-map;
+		};
+	};
 };
 
-&uart_B {
+&uart_b {
 	status = "okay";
 };
 
@@ -33,4 +44,49 @@
 	status = "okay";
 	pinctrl-0 = <&remote_pins>;
 	pinctrl-names = "default";
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&spicc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spicc0_pins_x>;
+	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
 };
diff --git a/src/arm64/amlogic/meson-s4.dtsi b/src/arm64/amlogic/meson-s4.dtsi
index e0cfc54..ce90b35 100644
--- a/src/arm64/amlogic/meson-s4.dtsi
+++ b/src/arm64/amlogic/meson-s4.dtsi
@@ -6,6 +6,10 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+#include <dt-bindings/power/meson-s4-power.h>
 
 / {
 	cpus {
@@ -92,6 +96,44 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,s4-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+					<&clkc_pll CLKID_FCLK_DIV2P5>,
+					<&clkc_pll CLKID_FCLK_DIV3>,
+					<&clkc_pll CLKID_FCLK_DIV4>,
+					<&clkc_pll CLKID_FCLK_DIV5>,
+					<&clkc_pll CLKID_FCLK_DIV7>,
+					<&clkc_pll CLKID_HIFI_PLL>,
+					<&clkc_pll CLKID_GP0_PLL>,
+					<&clkc_pll CLKID_MPLL0>,
+					<&clkc_pll CLKID_MPLL1>,
+					<&clkc_pll CLKID_MPLL2>,
+					<&clkc_pll CLKID_MPLL3>,
+					<&clkc_pll CLKID_HDMI_PLL>,
+					<&xtal>;
+				clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3",
+						"fclk_div4", "fclk_div5", "fclk_div7",
+						"hifi_pll", "gp0_pll", "mpll0", "mpll1",
+						"mpll2", "mpll3", "hdmi_pll", "xtal";
+				#clock-cells = <1>;
+			};
+
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,s4-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1e8>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				#clock-cells = <1>;
+			};
+
+			watchdog@2100 {
+				compatible = "amlogic,s4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,meson-s4-periphs-pinctrl";
 				#address-cells = <2>;
@@ -114,6 +156,187 @@
 						bias-disable;
 					};
 				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda",
+						       "i2c0_scl";
+						function = "i2c0";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_c",
+						       "i2c1_scl_c";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+						       "i2c1_scl_d";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_h",
+						       "i2c1_scl_h";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_x",
+						       "i2c1_scl_x";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda_d",
+						       "i2c2_scl_d";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins2: i2c2-pins2 {
+					mux {
+						groups = "i2c2_sda_h8",
+						       "i2c2_scl_h9";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins3: i2c2-pins3 {
+					mux {
+						groups = "i2c2_sda_h0",
+						       "i2c2_scl_h1";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_x",
+						       "i2c3_scl_x";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_z",
+						       "i2c3_scl_z";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins1: i2c4-pins1 {
+					mux {
+						groups = "i2c4_sda_c",
+						       "i2c4_scl_c";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins2: i2c4-pins2 {
+					mux {
+						groups = "i2c4_sda_d",
+						       "i2c4_scl_d";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins3: i2c4-pins3 {
+					mux {
+						groups = "i2c4_sda_z",
+						       "i2c4_scl_z";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+						       "emmc_nand_d1",
+						       "emmc_nand_d2",
+						       "emmc_nand_d3",
+						       "emmc_nand_d4",
+						       "emmc_nand_d5",
+						       "emmc_nand_d6",
+						       "emmc_nand_d7",
+						       "nand_ce0",
+						       "nand_ale",
+						       "nand_cle",
+						       "nand_wen_clk",
+						       "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				spicc0_pins_x: spicc0-pins_x {
+					mux {
+						groups = "spi_a_mosi_x",
+						       "spi_a_miso_x",
+						       "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_h: spicc0-pins-h {
+					mux {
+						groups = "spi_a_mosi_h",
+						       "spi_a_miso_h",
+						       "spi_a_clk_h";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_z: spicc0-pins-z {
+					mux {
+						groups = "spi_a_mosi_z",
+						       "spi_a_miso_z",
+						       "spi_a_clk_z";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
 			};
 
 			gpio_intc: interrupt-controller@4080 {
@@ -126,14 +349,120 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_ETHPHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet-phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SPICC0>,
+					 <&clkc_periphs CLKID_SPICC0_EN>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x20>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x20>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
-			uart_B: serial@7a000 {
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x20>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x20>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@6e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6e000 0x0 0x20>;
+				interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_E>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8c800 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+
+			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
 			};
 
 			reset: reset-controller@2000 {
@@ -154,5 +483,30 @@
 				reg = <0x0 0x440788 0x0 0x0c>;
 			};
 		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_S4_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_ETH>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+		};
 	};
 };
diff --git a/src/arm64/amlogic/meson-sm1-sei610.dts b/src/arm64/amlogic/meson-sm1-sei610.dts
index 095579c..1099320 100644
--- a/src/arm64/amlogic/meson-sm1-sei610.dts
+++ b/src/arm64/amlogic/meson-sm1-sei610.dts
@@ -32,7 +32,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
diff --git a/src/arm64/arm/juno-base.dtsi b/src/arm64/arm/juno-base.dtsi
index 8b4d280..b897f55 100644
--- a/src/arm64/arm/juno-base.dtsi
+++ b/src/arm64/arm/juno-base.dtsi
@@ -747,7 +747,7 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
@@ -760,7 +760,7 @@
 			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
@@ -773,28 +773,28 @@
 			};
 		};
 
-		big_cluster_thermal_zone: big-cluster {
+		big_cluster_thermal_zone: big-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 21>;
 			status = "disabled";
 		};
 
-		little_cluster_thermal_zone: little-cluster {
+		little_cluster_thermal_zone: little-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 22>;
 			status = "disabled";
 		};
 
-		gpu0_thermal_zone: gpu0 {
+		gpu0_thermal_zone: gpu0-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 23>;
 			status = "disabled";
 		};
 
-		gpu1_thermal_zone: gpu1 {
+		gpu1_thermal_zone: gpu1-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 24>;
diff --git a/src/arm64/arm/juno-scmi.dtsi b/src/arm64/arm/juno-scmi.dtsi
index ec85cd2..31929e2 100644
--- a/src/arm64/arm/juno-scmi.dtsi
+++ b/src/arm64/arm/juno-scmi.dtsi
@@ -76,27 +76,27 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			thermal-sensors = <&scmi_sensors0 0>;
 		};
 
-		soc {
+		soc-thermal {
 			thermal-sensors = <&scmi_sensors0 3>;
 		};
 
-		big-cluster {
+		big-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 21>;
 		};
 
-		little-cluster {
+		little-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 22>;
 		};
 
-		gpu0 {
+		gpu0-thermal {
 			thermal-sensors = <&scmi_sensors0 23>;
 		};
 
-		gpu1 {
+		gpu1-thermal {
 			thermal-sensors = <&scmi_sensors0 24>;
 		};
 	};
diff --git a/src/arm64/broadcom/northstar2/ns2.dtsi b/src/arm64/broadcom/northstar2/ns2.dtsi
index 9dcd25e..896d1f3 100644
--- a/src/arm64/broadcom/northstar2/ns2.dtsi
+++ b/src/arm64/broadcom/northstar2/ns2.dtsi
@@ -586,6 +586,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/src/arm64/broadcom/stingray/stingray.dtsi b/src/arm64/broadcom/stingray/stingray.dtsi
index f049687..d8516ec 100644
--- a/src/arm64/broadcom/stingray/stingray.dtsi
+++ b/src/arm64/broadcom/stingray/stingray.dtsi
@@ -450,6 +450,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
diff --git a/src/arm64/exynos/exynos5433.dtsi b/src/arm64/exynos/exynos5433.dtsi
index 91ae046..7fbbec0 100644
--- a/src/arm64/exynos/exynos5433.dtsi
+++ b/src/arm64/exynos/exynos5433.dtsi
@@ -361,7 +361,8 @@
 		ranges = <0x0 0x0 0x0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos5433-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -850,7 +851,8 @@
 			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos5433-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1546,7 +1548,7 @@
 		};
 
 		adc: adc@14d10000 {
-			compatible = "samsung,exynos7-adc";
+			compatible = "samsung,exynos5433-adc", "samsung,exynos7-adc";
 			reg = <0x14d10000 0x100>;
 			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc";
@@ -1556,7 +1558,7 @@
 		};
 
 		i2s1: i2s@14d60000 {
-			compatible = "samsung,exynos7-i2s";
+			compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
 			reg = <0x14d60000 0x100>;
 			dmas = <&pdma0 31>, <&pdma0 30>;
 			dma-names = "tx", "rx";
@@ -1571,7 +1573,7 @@
 		};
 
 		pwm: pwm@14dd0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos5433-pwm", "samsung,exynos4210-pwm";
 			reg = <0x14dd0000 0x100>;
 			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
@@ -1586,7 +1588,8 @@
 		};
 
 		hsi2c_0: i2c@14e40000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e40000 0x1000>;
 			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1599,7 +1602,8 @@
 		};
 
 		hsi2c_1: i2c@14e50000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e50000 0x1000>;
 			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1612,7 +1616,8 @@
 		};
 
 		hsi2c_2: i2c@14e60000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
 			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1625,7 +1630,8 @@
 		};
 
 		hsi2c_3: i2c@14e70000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
 			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1638,7 +1644,8 @@
 		};
 
 		hsi2c_4: i2c@14ec0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ec0000 0x1000>;
 			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1651,7 +1658,8 @@
 		};
 
 		hsi2c_5: i2c@14ed0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ed0000 0x1000>;
 			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1664,7 +1672,8 @@
 		};
 
 		hsi2c_6: i2c@14ee0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ee0000 0x1000>;
 			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1677,7 +1686,8 @@
 		};
 
 		hsi2c_7: i2c@14ef0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ef0000 0x1000>;
 			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1690,7 +1700,8 @@
 		};
 
 		hsi2c_8: i2c@14d90000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14d90000 0x1000>;
 			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1703,7 +1714,8 @@
 		};
 
 		hsi2c_9: i2c@14da0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14da0000 0x1000>;
 			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1716,7 +1728,8 @@
 		};
 
 		hsi2c_10: i2c@14de0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14de0000 0x1000>;
 			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1729,7 +1742,8 @@
 		};
 
 		hsi2c_11: i2c@14df0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14df0000 0x1000>;
 			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1820,7 +1834,8 @@
 		};
 
 		mshc_0: mmc@15540000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1833,7 +1848,8 @@
 		};
 
 		mshc_1: mmc@15550000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1846,7 +1862,8 @@
 		};
 
 		mshc_2: mmc@15560000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1897,7 +1914,8 @@
 			};
 
 			i2s0: i2s@11440000 {
-				compatible = "samsung,exynos7-i2s";
+				compatible = "samsung,exynos5433-i2s",
+					     "samsung,exynos7-i2s";
 				reg = <0x11440000 0x100>;
 				dmas = <&adma 0>, <&adma 2>;
 				dma-names = "tx", "rx";
diff --git a/src/arm64/exynos/exynos7.dtsi b/src/arm64/exynos/exynos7.dtsi
index 6ed80dd..9cb6bd6 100644
--- a/src/arm64/exynos/exynos7.dtsi
+++ b/src/arm64/exynos/exynos7.dtsi
@@ -128,7 +128,8 @@
 		ranges = <0 0 0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos7-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -279,7 +280,7 @@
 		};
 
 		serial_0: serial@13630000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x13630000 0x100>;
 			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_UART0>,
@@ -289,7 +290,7 @@
 		};
 
 		serial_1: serial@14c20000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c20000 0x100>;
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART1>,
@@ -299,7 +300,7 @@
 		};
 
 		serial_2: serial@14c30000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c30000 0x100>;
 			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART2>,
@@ -309,7 +310,7 @@
 		};
 
 		serial_3: serial@14c40000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c40000 0x100>;
 			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART3>,
@@ -539,7 +540,7 @@
 		};
 
 		rtc: rtc@10590000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
 			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +560,8 @@
 		};
 
 		gpu: gpu@14ac0000 {
-			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			compatible = "samsung,exynos7-mali",
+				     "samsung,exynos5433-mali", "arm,mali-t760";
 			reg = <0x14ac0000 0x5000>;
 			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
@@ -619,7 +621,7 @@
 		};
 
 		pwm: pwm@136c0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm";
 			reg = <0x136c0000 0x100>;
 			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/src/arm64/exynos/exynos7885.dtsi b/src/arm64/exynos/exynos7885.dtsi
index d69fc23..008228f 100644
--- a/src/arm64/exynos/exynos7885.dtsi
+++ b/src/arm64/exynos/exynos7885.dtsi
@@ -172,7 +172,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynos7885-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -264,7 +265,8 @@
 			reg = <0x11cb0000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos7885-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 			};
@@ -289,12 +291,14 @@
 		};
 
 		pmu_system_controller: system-controller@11c80000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynos7885-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x11c80000 0x10000>;
 		};
 
 		mmc_0: mmc@13500000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos7885-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x13500000 0x2000>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -307,7 +311,8 @@
 		};
 
 		serial_0: serial@13800000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13800000 0x100>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -320,7 +325,8 @@
 		};
 
 		serial_1: serial@13810000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13810000 0x100>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -333,7 +339,8 @@
 		};
 
 		serial_2: serial@13820000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13820000 0x100>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -346,7 +353,8 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -359,7 +367,8 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -372,7 +381,8 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -385,7 +395,8 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -398,7 +409,8 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -411,7 +423,8 @@
 		};
 
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -424,7 +437,8 @@
 		};
 
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -437,7 +451,8 @@
 		};
 
 		i2c_7: i2c@11cd0000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x11cd0000 0x100>;
 			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
diff --git a/src/arm64/exynos/exynos850.dtsi b/src/arm64/exynos/exynos850.dtsi
index 53104e6..da3f4a7 100644
--- a/src/arm64/exynos/exynos850.dtsi
+++ b/src/arm64/exynos/exynos850.dtsi
@@ -359,7 +359,8 @@
 			reg = <0x11850000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -368,7 +369,8 @@
 			reg = <0x11c30000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -396,7 +398,7 @@
 		};
 
 		rtc: rtc@11a30000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos850-rtc", "samsung,s3c6410-rtc";
 			reg = <0x11a30000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -406,7 +408,8 @@
 		};
 
 		mmc_0: mmc@12100000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos850-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x12100000 0x2000>;
 			interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -419,7 +422,7 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -432,7 +435,7 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -445,7 +448,7 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -458,7 +461,7 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -471,7 +474,7 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -485,7 +488,7 @@
 
 		/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -499,7 +502,7 @@
 
 		/* I2C_6 (also called MOTOR_I2C in TRM) */
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -640,7 +643,8 @@
 			status = "disabled";
 
 			hsi2c_0: i2c@138a0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138a0000 0xc0>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -668,7 +672,8 @@
 			status = "disabled";
 
 			hsi2c_1: i2c@138b0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138b0000 0xc0>;
 				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -696,7 +701,8 @@
 			status = "disabled";
 
 			hsi2c_2: i2c@138c0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138c0000 0xc0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -738,7 +744,8 @@
 			status = "disabled";
 
 			hsi2c_3: i2c@11d00000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d00000 0xc0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -778,7 +785,8 @@
 			status = "disabled";
 
 			hsi2c_4: i2c@11d20000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d20000 0xc0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
diff --git a/src/arm64/exynos/exynosautov9-sadk.dts b/src/arm64/exynos/exynosautov9-sadk.dts
index bc1815f..de2c1de 100644
--- a/src/arm64/exynos/exynosautov9-sadk.dts
+++ b/src/arm64/exynos/exynosautov9-sadk.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "exynosautov9.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Samsung ExynosAuto v9 SADK board";
@@ -32,6 +33,31 @@
 		      <0xa 0x00000000 0x2 0x00000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_volup &key_voldown>;
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpg2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpg1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	ufs_0_fixed_vcc_reg: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "ufs-vcc";
@@ -49,6 +75,31 @@
 	};
 };
 
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpg1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_tout3>;
diff --git a/src/arm64/exynos/exynosautov9.dtsi b/src/arm64/exynos/exynosautov9.dtsi
index b228cd7..c871a2f 100644
--- a/src/arm64/exynos/exynosautov9.dtsi
+++ b/src/arm64/exynos/exynosautov9.dtsi
@@ -166,7 +166,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynosautov9-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -309,7 +310,9 @@
 			reg = <0x10450000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynosautov9-wakeup-eint";
+				compatible = "samsung,exynosautov9-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -349,7 +352,8 @@
 		};
 
 		pmu_system_controller: system-controller@10460000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynosautov9-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x10460000 0x10000>;
 
 			reboot: syscon-reboot {
diff --git a/src/arm64/exynos/exynosautov920-pinctrl.dtsi b/src/arm64/exynos/exynosautov920-pinctrl.dtsi
new file mode 100644
index 0000000..663e826
--- /dev/null
+++ b/src/arm64/exynos/exynosautov920-pinctrl.dtsi
@@ -0,0 +1,1266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi0 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph8: gph8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph5: gph5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph6: gph6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2ufs {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_refclk_out_1: ufs-refclk-out-1-pins {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_rst_n_1: ufs-rst-n-1-pins {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* PWM PERIC0 */
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2: pwm-tout2-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3: pwm-tout3-pins {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI00 */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_bus_dual: uart0-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI01 */
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_dual: uart1-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI02 */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI03 */
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI04 */
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI05 */
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI06 */
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI07 */
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI08 */
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00  */
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00_I2C */
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01 */
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01_I2C */
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02 */
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02_I2C */
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03 */
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03_I2C */
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04 */
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04_I2C */
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05 */
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05_I2C */
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06 */
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06_I2C */
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07 */
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07_I2C */
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08 */
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08_I2C */
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI00 */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI01 */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI02 */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI03 */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI04 */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI05 */
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI06 */
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI07 */
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI08 */
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC0 */
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* UART PERIC1 USI09 */
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI10 */
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI11 */
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI12 */
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI13 */
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI14 */
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI15 */
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI16 */
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI17 */
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09 */
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09_I2C */
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10 */
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10_I2C */
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11 */
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11_I2C */
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12 */
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12_I2C */
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13 */
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13_I2C */
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14 */
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14_I2C */
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15 */
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15_I2C */
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16 */
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16_I2C */
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17 */
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17_I2C */
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI09 */
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI10 */
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI11 */
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI12 */
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI13 */
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI14 */
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI15 */
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI16 */
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI17 */
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC1 */
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/src/arm64/exynos/exynosautov920-sadk.dts b/src/arm64/exynos/exynosautov920-sadk.dts
new file mode 100644
index 0000000..a397f06
--- /dev/null
+++ b/src/arm64/exynos/exynosautov920-sadk.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SADK board device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov920.dtsi"
+#include "exynos-pinctrl.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung ExynosAutov920 SADK board";
+	compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_back>;
+
+		key-wakeup {
+			label = "KEY_WAKEUP";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "KEY_BACK";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpp6 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x70000000>,
+		      <0x8 0x80000000 0x1 0xfba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+};
+
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_back: key-back-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout0>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&usi_0 {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <38400000>;
+};
diff --git a/src/arm64/exynos/exynosautov920.dtsi b/src/arm64/exynos/exynosautov920.dtsi
new file mode 100644
index 0000000..c1c8566
--- /dev/null
+++ b/src/arm64/exynos/exynosautov920.dtsi
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynosautov920";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_hsi0;
+		pinctrl3 = &pinctrl_hsi1;
+		pinctrl4 = &pinctrl_hsi2;
+		pinctrl5 = &pinctrl_hsi2ufs;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	xtcxo: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	/*
+	 * FIXME: Keep the stub clock for serial driver, until proper clock
+	 * driver is implemented.
+	 */
+	clock_usi: clock-usi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "usi";
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+		};
+
+		cpu8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+		};
+
+		cpu9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynosautov920-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>,
+			      <0x10460000 0x140000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon_peric0: syscon@10820000 {
+			compatible = "samsung,exynosautov920-peric0-sysreg",
+				     "syscon";
+			reg = <0x10820000 0x2000>;
+		};
+
+		pinctrl_peric0: pinctrl@10830000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10830000 0x10000>;
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usi_0: usi@108800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&clock_usi>, <&clock_usi>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10880000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10880000 0xc0>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus>;
+				clocks = <&clock_usi>, <&clock_usi>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		pwm: pwm@109b0000 {
+			compatible = "samsung,exynosautov920-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x109b0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		syscon_peric1: syscon@10c20000 {
+			compatible = "samsung,exynosautov920-peric1-sysreg",
+				     "syscon";
+			reg = <0x10c20000 0x2000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c30000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10c30000 0x10000>;
+			interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x11850000 0x10000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynosautov920-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynosautov920-pmu",
+				     "samsung,exynos7-pmu","syscon";
+			reg = <0x11860000 0x10000>;
+		};
+
+		pinctrl_hsi0: pinctrl@16040000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16040000 0x10000>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi1: pinctrl@16450000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16450000 0x10000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2: pinctrl@16c10000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16c10000 0x10000>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2ufs: pinctrl@16d20000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16d20000 0x10000>;
+			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aud: pinctrl@1a460000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x1a460000 0x10000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "exynosautov920-pinctrl.dtsi"
diff --git a/src/arm64/exynos/google/gs101-oriole.dts b/src/arm64/exynos/google/gs101-oriole.dts
new file mode 100644
index 0000000..4a71f75
--- /dev/null
+++ b/src/arm64/exynos/google/gs101-oriole.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Oriole Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "gs101-pinctrl.h"
+#include "gs101.dtsi"
+
+/ {
+	model = "Oriole";
+	compatible = "google,gs101-oriole", "google,gs101";
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		/* Bootloader expects bootargs specified otherwise it crashes */
+		bootargs = "";
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+
+		button-vol-down {
+			label = "KEY_VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "KEY_VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "KEY_POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&ext_24_5m {
+	clock-frequency = <24576000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&pinctrl_far_alive {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa7-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_gpio_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&serial_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_bus>;
+	status = "okay";
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	timeout-sec = <30>;
+	status = "okay";
+};
diff --git a/src/arm64/exynos/google/gs101-pinctrl.dtsi b/src/arm64/exynos/google/gs101-pinctrl.dtsi
new file mode 100644
index 0000000..e6a9776
--- /dev/null
+++ b/src/arm64/exynos/google/gs101-pinctrl.dtsi
@@ -0,0 +1,1249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include "gs101-pinctrl.h"
+
+&pinctrl_gpio_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa5: gpa5-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa9: gpa9-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa10: gpa10-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpa2-3", "gpa2-4";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_far_alive {
+	gpa6: gpa6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa7: gpa7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa8: gpa8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa11: gpa11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+};
+
+&pinctrl_gsacore {
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps2: gps2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_gsactrl {
+	gps3: gps3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins{
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gph4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gph4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gph4-3", "gph4-4", "gph4-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp13: gpp13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp14: gpp14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp15: gpp15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp16: gpp16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp17: gpp17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp18: gpp18-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp19: gpp19-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* USI_PERIC0_UART_DBG */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	disp_te_pri_on: disp-te-pri-on-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_pri_off: disp-te-pri-off-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	disp_te_sec_on: disp-te-sec-on-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_sec_off: disp-te-sec-off-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	sensor_mclk1_out: sensor-mclk1-out-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk1_fn: sensor-mclk1-fn-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_out: sensor-mclk2-out-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_fn: sensor-mclk2-fn-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_out: sensor-mclk3-out-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_fn: sensor-mclk3-fn-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_out: sensor-mclk4-out-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_fn: sensor-mclk4-fn-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_out: sensor-mclk5-out-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_fn: sensor-mclk5-fn-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_out: sensor-mclk6-out-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_fn: sensor-mclk6-fn-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_out: sensor-mclk7-out-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_fn: sensor-mclk7-fn-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_out: sensor-mclk8-out-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_fn: sensor-mclk8-fn-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart14_bus_single: uart14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1",
+			       "gpp18-2", "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
+	};
+
+	uart8_bus_single: uart8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
+			       "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart7_bus_single: uart7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1",
+			       "gpp14-2", "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart6_bus_single: uart6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1",
+			       "gpp12-2", "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart5_bus_single: uart5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1",
+			       "gpp10-2", "gpp10-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart4_bus_single: uart4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1",
+			       "gpp8-2", "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart3_bus_single: uart3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1",
+			       "gpp6-2", "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart2_bus_single: uart2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1",
+			       "gpp4-2", "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart1_bus_single: uart1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1",
+			       "gpp2-2", "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp20: gpp20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp21: gpp21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp22: gpp22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp23: gpp23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp24: gpp24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp25: gpp25-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp26: gpp26-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp27: gpp27-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins  {
+		samsung,pins = "gpp25-0", "gpp25-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart13_bus_single: uart13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1",
+			       "gpp25-2", "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart12_bus_single: uart12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5",
+			       "gpp23-6", "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs2: spi14-cs2-pins {
+		samsung,pins = "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart11_bus_single: uart11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1",
+			       "gpp23-2", "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart10_bus_single: uart10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1",
+			       "gpp21-2", "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart9_bus_single: uart9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5",
+			       "gpp20-6", "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart0_bus_single: uart0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1",
+			       "gpp20-2", "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
diff --git a/src/arm64/exynos/google/gs101-pinctrl.h b/src/arm64/exynos/google/gs101-pinctrl.h
new file mode 100644
index 0000000..b7d276b
--- /dev/null
+++ b/src/arm64/exynos/google/gs101-pinctrl.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Pinctrl binding constants for GS101
+ *
+ * Copyright 2020-2023 Google LLC
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+
+#define GS101_PIN_PULL_NONE		0
+#define GS101_PIN_PULL_DOWN		1
+#define GS101_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define GS101_PIN_PDN_OUT0		0
+#define GS101_PIN_PDN_OUT1		1
+#define GS101_PIN_PDN_INPUT		2
+#define GS101_PIN_PDN_PREV		3
+
+/* GS101 drive strengths */
+#define GS101_PIN_DRV_2_5_MA		0
+#define GS101_PIN_DRV_5_MA		1
+#define GS101_PIN_DRV_7_5_MA		2
+#define GS101_PIN_DRV_10_MA		3
+
+#define GS101_PIN_FUNC_INPUT		0
+#define GS101_PIN_FUNC_OUTPUT		1
+#define GS101_PIN_FUNC_2		2
+#define GS101_PIN_FUNC_3		3
+#define GS101_PIN_FUNC_EINT		0xf
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ */
diff --git a/src/arm64/exynos/google/gs101.dtsi b/src/arm64/exynos/google/gs101.dtsi
new file mode 100644
index 0000000..d838e3a
--- /dev/null
+++ b/src/arm64/exynos/google/gs101.dtsi
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include <dt-bindings/clock/google,gs101.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "google,gs101";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_gpio_alive;
+		pinctrl1 = &pinctrl_far_alive;
+		pinctrl2 = &pinctrl_gsacore;
+		pinctrl3 = &pinctrl_gsactrl;
+		pinctrl4 = &pinctrl_peric0;
+		pinctrl5 = &pinctrl_peric1;
+		pinctrl6 = &pinctrl_hsi1;
+		pinctrl7 = &pinctrl_hsi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0000>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0100>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0200>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0300>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0400>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0500>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0600>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0700>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			ANANKE_CPU_SLEEP: cpu-ananke-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <70>;
+				exit-latency-us = <160>;
+				min-residency-us = <2000>;
+			};
+
+			ENYO_CPU_SLEEP: cpu-enyo-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+			};
+
+			HERA_CPU_SLEEP: cpu-hera-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+			};
+		};
+	};
+
+	/* TODO replace with CCF clock */
+	dummy_clk: clock-3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12345>;
+		clock-output-names = "pclk";
+	};
+
+	/* ect node is required to be present by bootloader */
+	ect {
+	};
+
+	ext_24_5m: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_200m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-2 {
+		compatible = "arm,cortex-x1-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	pmu-3 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gsa_reserved_protected: gsa@90200000 {
+			reg = <0x0 0x90200000 0x400000>;
+			no-map;
+		};
+
+		tpu_fw_reserved: tpu-fw@93000000 {
+			reg = <0x0 0x93000000 0x1000000>;
+			no-map;
+		};
+
+		aoc_reserve: aoc@94000000 {
+			reg = <0x0 0x94000000 0x03000000>;
+			no-map;
+		};
+
+		abl_reserved: abl@f8800000 {
+			reg = <0x0 0xf8800000 0x02000000>;
+			no-map;
+		};
+
+		dss_log_reserved: dss-log-reserved@fd3f0000 {
+			reg = <0x0 0xfd3f0000 0x0000e000>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
+			reg = <0x0 0xfd3fe000 0x00001000>;
+			no-map;
+		};
+
+		bldr_log_reserved: bldr-log-reserved@fd800000 {
+			reg = <0x0 0xfd800000 0x00100000>;
+			no-map;
+		};
+
+		bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
+			reg = <0x0 0xfd900000 0x00002000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		cmu_misc: clock-controller@10010000 {
+			compatible = "google,gs101-cmu-misc";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_MISC_SSS>;
+			clock-names = "bus", "sss";
+		};
+
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10070000 0x100>;
+			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>, /* GICD */
+			      <0x10440000 0x100000>;/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		sysreg_peric0: syscon@10820000 {
+			compatible = "google,gs101-peric0-sysreg", "syscon";
+			reg = <0x10820000 0x10000>;
+		};
+
+		pinctrl_peric0: pinctrl@10840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10840000 0x00001000>;
+			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		usi_uart: usi@10a000c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10a000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&dummy_clk>, <&dummy_clk>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			status = "disabled";
+
+			serial_0: serial@10a00000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a00000 0xc0>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 634
+					      IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		sysreg_peric1: syscon@10c20000 {
+			compatible = "google,gs101-peric1-sysreg", "syscon";
+			reg = <0x10c20000 0x10000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c40000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10c40000 0x00001000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		pinctrl_hsi1: pinctrl@11840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x11840000 0x00001000>;
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		pinctrl_hsi2: pinctrl@14440000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x14440000 0x00001000>;
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		cmu_apm: clock-controller@17400000 {
+			compatible = "google,gs101-cmu-apm";
+			reg = <0x17400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+
+		sysreg_apm: syscon@174204e0 {
+			compatible = "google,gs101-apm-sysreg", "syscon";
+			reg = <0x174204e0 0x1000>;
+		};
+
+		pmu_system_controller: system-controller@17460000 {
+			compatible = "google,gs101-pmu", "syscon";
+			reg = <0x17460000 0x10000>;
+		};
+
+		pinctrl_gpio_alive: pinctrl@174d0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174d0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_far_alive: pinctrl@174e0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174e0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_gsactrl: pinctrl@17940000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17940000 0x00001000>;
+		};
+
+		pinctrl_gsacore: pinctrl@17a80000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17a80000 0x00001000>;
+		};
+
+		cmu_top: clock-controller@1e080000 {
+			compatible = "google,gs101-cmu-top";
+			reg = <0x1e080000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts =
+		   <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
+	};
+};
+
+#include "gs101-pinctrl.dtsi"
diff --git a/src/arm64/freescale/fsl-ls1012a.dtsi b/src/arm64/freescale/fsl-ls1012a.dtsi
index a863022..1e3fe38 100644
--- a/src/arm64/freescale/fsl-ls1012a.dtsi
+++ b/src/arm64/freescale/fsl-ls1012a.dtsi
@@ -307,46 +307,46 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
-			fsl,tmu-calibration = <0x00000000 0x00000025
-					       0x00000001 0x0000002c
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x0000005f
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006c
+			fsl,tmu-calibration =
+					<0x00000000 0x00000025>,
+					<0x00000001 0x0000002c>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x0000005f>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006c>,
 
-					       0x00010000 0x00000026
-					       0x00010001 0x0000002d
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004d
-					       0x00010006 0x00000055
-					       0x00010007 0x0000005d
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006d
+					<0x00010000 0x00000026>,
+					<0x00010001 0x0000002d>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004d>,
+					<0x00010006 0x00000055>,
+					<0x00010007 0x0000005d>,
+					<0x00010008 0x00000065>,
+					<0x00010009 0x0000006d>,
 
-					       0x00020000 0x00000026
-					       0x00020001 0x00000030
-					       0x00020002 0x0000003a
-					       0x00020003 0x00000044
-					       0x00020004 0x0000004e
-					       0x00020005 0x00000059
-					       0x00020006 0x00000063
+					<0x00020000 0x00000026>,
+					<0x00020001 0x00000030>,
+					<0x00020002 0x0000003a>,
+					<0x00020003 0x00000044>,
+					<0x00020004 0x0000004e>,
+					<0x00020005 0x00000059>,
+					<0x00020006 0x00000063>,
 
-					       0x00030000 0x00000014
-					       0x00030001 0x00000021
-					       0x00030002 0x0000002e
-					       0x00030003 0x0000003a
-					       0x00030004 0x00000047
-					       0x00030005 0x00000053
-					       0x00030006 0x00000060>;
-			big-endian;
+					<0x00030000 0x00000014>,
+					<0x00030001 0x00000021>,
+					<0x00030002 0x0000002e>,
+					<0x00030003 0x0000003a>,
+					<0x00030004 0x00000047>,
+					<0x00030005 0x00000053>,
+					<0x00030006 0x00000060>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/src/arm64/freescale/fsl-ls1028a.dtsi b/src/arm64/freescale/fsl-ls1028a.dtsi
index eefe357..ae534c2 100644
--- a/src/arm64/freescale/fsl-ls1028a.dtsi
+++ b/src/arm64/freescale/fsl-ls1028a.dtsi
@@ -1026,49 +1026,50 @@
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
 			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
-			fsl,tmu-calibration = <0x00000000 0x00000024
-					       0x00000001 0x0000002b
-					       0x00000002 0x00000031
-					       0x00000003 0x00000038
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000045
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x00000060
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006d
+			fsl,tmu-calibration =
+					<0x00000000 0x00000024>,
+					<0x00000001 0x0000002b>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000038>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000045>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x00000060>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006d>,
 
-					       0x00010000 0x0000001c
-					       0x00010001 0x00000024
-					       0x00010002 0x0000002c
-					       0x00010003 0x00000035
-					       0x00010004 0x0000003d
-					       0x00010005 0x00000045
-					       0x00010006 0x0000004d
-					       0x00010007 0x00000055
-					       0x00010008 0x0000005e
-					       0x00010009 0x00000066
-					       0x0001000a 0x0000006e
+					<0x00010000 0x0000001c>,
+					<0x00010001 0x00000024>,
+					<0x00010002 0x0000002c>,
+					<0x00010003 0x00000035>,
+					<0x00010004 0x0000003d>,
+					<0x00010005 0x00000045>,
+					<0x00010006 0x0000004d>,
+					<0x00010007 0x00000055>,
+					<0x00010008 0x0000005e>,
+					<0x00010009 0x00000066>,
+					<0x0001000a 0x0000006e>,
 
-					       0x00020000 0x00000018
-					       0x00020001 0x00000022
-					       0x00020002 0x0000002d
-					       0x00020003 0x00000038
-					       0x00020004 0x00000043
-					       0x00020005 0x0000004d
-					       0x00020006 0x00000058
-					       0x00020007 0x00000063
-					       0x00020008 0x0000006e
+					<0x00020000 0x00000018>,
+					<0x00020001 0x00000022>,
+					<0x00020002 0x0000002d>,
+					<0x00020003 0x00000038>,
+					<0x00020004 0x00000043>,
+					<0x00020005 0x0000004d>,
+					<0x00020006 0x00000058>,
+					<0x00020007 0x00000063>,
+					<0x00020008 0x0000006e>,
 
-					       0x00030000 0x00000010
-					       0x00030001 0x0000001c
-					       0x00030002 0x00000029
-					       0x00030003 0x00000036
-					       0x00030004 0x00000042
-					       0x00030005 0x0000004f
-					       0x00030006 0x0000005b
-					       0x00030007 0x00000068>;
+					<0x00030000 0x00000010>,
+					<0x00030001 0x0000001c>,
+					<0x00030002 0x00000029>,
+					<0x00030003 0x00000036>,
+					<0x00030004 0x00000042>,
+					<0x00030005 0x0000004f>,
+					<0x00030006 0x0000005b>,
+					<0x00030007 0x00000068>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/src/arm64/freescale/fsl-ls1043a.dtsi b/src/arm64/freescale/fsl-ls1043a.dtsi
index 229bb4b..d333b77 100644
--- a/src/arm64/freescale/fsl-ls1043a.dtsi
+++ b/src/arm64/freescale/fsl-ls1043a.dtsi
@@ -447,46 +447,47 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
-			fsl,tmu-calibration = <0x00000000 0x00000023
-					       0x00000001 0x0000002a
-					       0x00000002 0x00000031
-					       0x00000003 0x00000037
-					       0x00000004 0x0000003e
-					       0x00000005 0x00000044
-					       0x00000006 0x0000004b
-					       0x00000007 0x00000051
-					       0x00000008 0x00000058
-					       0x00000009 0x0000005e
-					       0x0000000a 0x00000065
-					       0x0000000b 0x0000006b
+			fsl,tmu-calibration =
+					<0x00000000 0x00000023>,
+					<0x00000001 0x0000002a>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000037>,
+					<0x00000004 0x0000003e>,
+					<0x00000005 0x00000044>,
+					<0x00000006 0x0000004b>,
+					<0x00000007 0x00000051>,
+					<0x00000008 0x00000058>,
+					<0x00000009 0x0000005e>,
+					<0x0000000a 0x00000065>,
+					<0x0000000b 0x0000006b>,
 
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003b
-					       0x00010004 0x00000043
-					       0x00010005 0x0000004b
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000064
-					       0x00010009 0x0000006c
+					<0x00010000 0x00000023>,
+					<0x00010001 0x0000002b>,
+					<0x00010002 0x00000033>,
+					<0x00010003 0x0000003b>,
+					<0x00010004 0x00000043>,
+					<0x00010005 0x0000004b>,
+					<0x00010006 0x00000054>,
+					<0x00010007 0x0000005c>,
+					<0x00010008 0x00000064>,
+					<0x00010009 0x0000006c>,
 
-					       0x00020000 0x00000021
-					       0x00020001 0x0000002c
-					       0x00020002 0x00000036
-					       0x00020003 0x00000040
-					       0x00020004 0x0000004b
-					       0x00020005 0x00000055
-					       0x00020006 0x0000005f
+					<0x00020000 0x00000021>,
+					<0x00020001 0x0000002c>,
+					<0x00020002 0x00000036>,
+					<0x00020003 0x00000040>,
+					<0x00020004 0x0000004b>,
+					<0x00020005 0x00000055>,
+					<0x00020006 0x0000005f>,
 
-					       0x00030000 0x00000013
-					       0x00030001 0x0000001d
-					       0x00030002 0x00000028
-					       0x00030003 0x00000032
-					       0x00030004 0x0000003d
-					       0x00030005 0x00000047
-					       0x00030006 0x00000052
-					       0x00030007 0x0000005c>;
+					<0x00030000 0x00000013>,
+					<0x00030001 0x0000001d>,
+					<0x00030002 0x00000028>,
+					<0x00030003 0x00000032>,
+					<0x00030004 0x0000003d>,
+					<0x00030005 0x00000047>,
+					<0x00030006 0x00000052>,
+					<0x00030007 0x0000005c>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/src/arm64/freescale/fsl-ls1046a.dtsi b/src/arm64/freescale/fsl-ls1046a.dtsi
index 50f68ca..1515cec 100644
--- a/src/arm64/freescale/fsl-ls1046a.dtsi
+++ b/src/arm64/freescale/fsl-ls1046a.dtsi
@@ -445,46 +445,46 @@
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x00000029
-				0x00000002 0x0000002f
-				0x00000003 0x00000036
-				0x00000004 0x0000003c
-				0x00000005 0x00000042
-				0x00000006 0x00000049
-				0x00000007 0x0000004f
-				0x00000008 0x00000055
-				0x00000009 0x0000005c
-				0x0000000a 0x00000062
-				0x0000000b 0x00000068
+				<0x00000000 0x00000023>,
+				<0x00000001 0x00000029>,
+				<0x00000002 0x0000002f>,
+				<0x00000003 0x00000036>,
+				<0x00000004 0x0000003c>,
+				<0x00000005 0x00000042>,
+				<0x00000006 0x00000049>,
+				<0x00000007 0x0000004f>,
+				<0x00000008 0x00000055>,
+				<0x00000009 0x0000005c>,
+				<0x0000000a 0x00000062>,
+				<0x0000000b 0x00000068>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x0000003e
-				0x00020004 0x00000048
-				0x00020005 0x00000052
-				0x00020006 0x0000005c
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x0000003e>,
+				<0x00020004 0x00000048>,
+				<0x00020005 0x00000052>,
+				<0x00020006 0x0000005c>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000011
-				0x00030001 0x0000001a
-				0x00030002 0x00000024
-				0x00030003 0x0000002e
-				0x00030004 0x00000038
-				0x00030005 0x00000042
-				0x00030006 0x0000004c
-				0x00030007 0x00000056>;
+				<0x00030000 0x00000011>,
+				<0x00030001 0x0000001a>,
+				<0x00030002 0x00000024>,
+				<0x00030003 0x0000002e>,
+				<0x00030004 0x00000038>,
+				<0x00030005 0x00000042>,
+				<0x00030006 0x0000004c>,
+				<0x00030007 0x00000056>;
 			big-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/src/arm64/freescale/fsl-ls1088a.dtsi b/src/arm64/freescale/fsl-ls1088a.dtsi
index 8f6090a..8616d5e 100644
--- a/src/arm64/freescale/fsl-ls1088a.dtsi
+++ b/src/arm64/freescale/fsl-ls1088a.dtsi
@@ -284,46 +284,46 @@
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x0000002a
-				0x00000002 0x00000030
-				0x00000003 0x00000037
-				0x00000004 0x0000003d
-				0x00000005 0x00000044
-				0x00000006 0x0000004a
-				0x00000007 0x00000051
-				0x00000008 0x00000057
-				0x00000009 0x0000005e
-				0x0000000a 0x00000064
-				0x0000000b 0x0000006b
+				<0x00000000 0x00000023>,
+				<0x00000001 0x0000002a>,
+				<0x00000002 0x00000030>,
+				<0x00000003 0x00000037>,
+				<0x00000004 0x0000003d>,
+				<0x00000005 0x00000044>,
+				<0x00000006 0x0000004a>,
+				<0x00000007 0x00000051>,
+				<0x00000008 0x00000057>,
+				<0x00000009 0x0000005e>,
+				<0x0000000a 0x00000064>,
+				<0x0000000b 0x0000006b>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x00000040
-				0x00020004 0x0000004a
-				0x00020005 0x00000054
-				0x00020006 0x0000005e
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x00000040>,
+				<0x00020004 0x0000004a>,
+				<0x00020005 0x00000054>,
+				<0x00020006 0x0000005e>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000010
-				0x00030001 0x0000001c
-				0x00030002 0x00000027
-				0x00030003 0x00000032
-				0x00030004 0x0000003e
-				0x00030005 0x00000049
-				0x00030006 0x00000054
-				0x00030007 0x00000060>;
+				<0x00030000 0x00000010>,
+				<0x00030001 0x0000001c>,
+				<0x00030002 0x00000027>,
+				<0x00030003 0x00000032>,
+				<0x00030004 0x0000003e>,
+				<0x00030005 0x00000049>,
+				<0x00030006 0x00000054>,
+				<0x00030007 0x00000060>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/src/arm64/freescale/fsl-ls208xa.dtsi b/src/arm64/freescale/fsl-ls208xa.dtsi
index 717288b..0b72928 100644
--- a/src/arm64/freescale/fsl-ls208xa.dtsi
+++ b/src/arm64/freescale/fsl-ls208xa.dtsi
@@ -321,42 +321,43 @@
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
-			fsl,tmu-calibration = <0x00000000 0x00000026
-					       0x00000001 0x0000002d
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004d
-					       0x00000007 0x00000054
-					       0x00000008 0x0000005a
-					       0x00000009 0x00000061
-					       0x0000000a 0x0000006a
-					       0x0000000b 0x00000071
+			fsl,tmu-calibration =
+					<0x00000000 0x00000026>,
+					<0x00000001 0x0000002d>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004d>,
+					<0x00000007 0x00000054>,
+					<0x00000008 0x0000005a>,
+					<0x00000009 0x00000061>,
+					<0x0000000a 0x0000006a>,
+					<0x0000000b 0x00000071>,
 
-					       0x00010000 0x00000025
-					       0x00010001 0x0000002c
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004e
-					       0x00010006 0x00000057
-					       0x00010007 0x00000061
-					       0x00010008 0x0000006b
-					       0x00010009 0x00000076
+					<0x00010000 0x00000025>,
+					<0x00010001 0x0000002c>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004e>,
+					<0x00010006 0x00000057>,
+					<0x00010007 0x00000061>,
+					<0x00010008 0x0000006b>,
+					<0x00010009 0x00000076>,
 
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000049
-					       0x00020004 0x00000056
-					       0x00020005 0x00000061
-					       0x00020006 0x0000006d
+					<0x00020000 0x00000029>,
+					<0x00020001 0x00000033>,
+					<0x00020002 0x0000003d>,
+					<0x00020003 0x00000049>,
+					<0x00020004 0x00000056>,
+					<0x00020005 0x00000061>,
+					<0x00020006 0x0000006d>,
 
-					       0x00030000 0x00000021
-					       0x00030001 0x0000002a
-					       0x00030002 0x0000003c
-					       0x00030003 0x0000004e>;
+					<0x00030000 0x00000021>,
+					<0x00030001 0x0000002a>,
+					<0x00030002 0x0000003c>,
+					<0x00030003 0x0000004e>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
new file mode 100644
index 0000000..da0f58e
--- /dev/null
+++ b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "fsl-lx2160a-tqmlx2160a.dtsi"
+
+/ {
+	model = "TQ Systems GmbH MBLX2160A Starterkit";
+	compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a",
+		     "fsl,lx2160a";
+
+	aliases {
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			label = "button:user1";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F1>;
+		};
+
+		button-user2 {
+			label = "button:user2";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user1 {
+			gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sfp_xfi1: sfp-xfi1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi1_i2c>;
+		mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	sfp_xfi2: sfp-xfi2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi2_i2c>;
+		mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&dp83867_2_3>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&dp83867_2_4>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	dp83867_1_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_5: ethernet-phy@5 {
+		reg = <5>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_6: ethernet-phy@6 {
+		reg = <6>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	dp83867_2_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	no-mmc;
+	no-sdio;
+	wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	gpioex3: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpioex0: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex1: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex2: gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi1_i2c: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi2_i2c: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pcs_mdio17 {
+	status = "okay";
+};
+
+&pcs_mdio18 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
new file mode 100644
index 0000000..8284a56
--- /dev/null
+++ b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac9 {
+	phy-handle = <&dp83867_2_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac10 {
+	phy-handle = <&dp83867_2_2>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
diff --git a/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
new file mode 100644
index 0000000..636b17a
--- /dev/null
+++ b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac1 {
+	managed = "in-band-status";
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
diff --git a/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
new file mode 100644
index 0000000..6d0c808
--- /dev/null
+++ b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	phy-handle = <&dp83867_1_5>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	phy-handle = <&dp83867_1_6>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
diff --git a/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
new file mode 100644
index 0000000..db88a86
--- /dev/null
+++ b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
new file mode 100644
index 0000000..f6dfa76
--- /dev/null
+++ b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/src/arm64/freescale/fsl-lx2160a-tqmlx2160a.dtsi b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a.dtsi
new file mode 100644
index 0000000..89a4765
--- /dev/null
+++ b/src/arm64/freescale/fsl-lx2160a-tqmlx2160a.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc1 {
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	flash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1f {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	eeprom2: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/src/arm64/freescale/fsl-lx2160a.dtsi b/src/arm64/freescale/fsl-lx2160a.dtsi
index f176ca2..6640b49 100644
--- a/src/arm64/freescale/fsl-lx2160a.dtsi
+++ b/src/arm64/freescale/fsl-lx2160a.dtsi
@@ -732,9 +732,9 @@
 			fsl,tmu-range = <0x800000e6 0x8001017d>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000035
+				<0x00000000 0x00000035>,
 				/* Calibration data group 2 */
-				0x00000001 0x00000154>;
+				<0x00000001 0x00000154>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/src/arm64/freescale/imx8-apalis-ixora-v1.2.dtsi b/src/arm64/freescale/imx8-apalis-ixora-v1.2.dtsi
index 72136c4..f6654fd 100644
--- a/src/arm64/freescale/imx8-apalis-ixora-v1.2.dtsi
+++ b/src/arm64/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -68,6 +68,7 @@
 		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -77,6 +78,7 @@
 		gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
diff --git a/src/arm64/freescale/imx8-ss-audio.dtsi b/src/arm64/freescale/imx8-ss-audio.dtsi
index 9d75ce4..f057c6b 100644
--- a/src/arm64/freescale/imx8-ss-audio.dtsi
+++ b/src/arm64/freescale/imx8-ss-audio.dtsi
@@ -24,7 +24,6 @@
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x591f0000 0x190000>;
 		#dma-cells = <3>;
-		shared-interrupt;
 		dma-channels = <24>;
 		dma-channel-mask = <0x5c0c00>;
 		interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */
@@ -127,7 +126,6 @@
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x599f0000 0xc0000>;
 		#dma-cells = <3>;
-		shared-interrupt;
 		dma-channels = <11>;
 		dma-channel-mask = <0xc0>;
 		interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */
diff --git a/src/arm64/freescale/imx8dxl-ss-conn.dtsi b/src/arm64/freescale/imx8dxl-ss-conn.dtsi
index a414df6..6d13e4f 100644
--- a/src/arm64/freescale/imx8dxl-ss-conn.dtsi
+++ b/src/arm64/freescale/imx8dxl-ss-conn.dtsi
@@ -13,6 +13,13 @@
 		clock-frequency = <250000000>;
 		clock-output-names = "conn_enet0_root_clk";
 	};
+
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
 };
 
 &conn_subsys {
@@ -22,7 +29,7 @@
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "eth_wake_irq", "macirq";
+		interrupt-names = "macirq", "eth_wake_irq";
 		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
 			 <&eqos_lpcg IMX_LPCG_CLK_6>,
 			 <&eqos_lpcg IMX_LPCG_CLK_0>,
@@ -53,13 +60,6 @@
 		rx-burst-size-dword = <0x10>;
 		power-domains = <&pd IMX_SC_R_USB_1>;
 		status = "disabled";
-
-		clk_dummy: clock-dummy {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "clk_dummy";
-		};
 	};
 
 	usbmisc2: usbmisc@5b0e0200 {
diff --git a/src/arm64/freescale/imx8dxl-ss-ddr.dtsi b/src/arm64/freescale/imx8dxl-ss-ddr.dtsi
index 550f513..3569abb 100644
--- a/src/arm64/freescale/imx8dxl-ss-ddr.dtsi
+++ b/src/arm64/freescale/imx8dxl-ss-ddr.dtsi
@@ -4,6 +4,6 @@
  */
 
 &ddr_pmu0 {
-	compatible = "fsl,imx8-ddr-pmu";
+	compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu";
 	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/src/arm64/freescale/imx8mm-beacon-som.dtsi b/src/arm64/freescale/imx8mm-beacon-som.dtsi
index f264102..62ed646 100644
--- a/src/arm64/freescale/imx8mm-beacon-som.dtsi
+++ b/src/arm64/freescale/imx8mm-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mm-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
diff --git a/src/arm64/freescale/imx8mm-emcon-avari.dtsi b/src/arm64/freescale/imx8mm-emcon-avari.dtsi
index d897a85..44c2cba 100644
--- a/src/arm64/freescale/imx8mm-emcon-avari.dtsi
+++ b/src/arm64/freescale/imx8mm-emcon-avari.dtsi
@@ -104,7 +104,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git a/src/arm64/freescale/imx8mm-evk.dtsi b/src/arm64/freescale/imx8mm-evk.dtsi
index a882c86..b53104e 100644
--- a/src/arm64/freescale/imx8mm-evk.dtsi
+++ b/src/arm64/freescale/imx8mm-evk.dtsi
@@ -367,12 +367,6 @@
 		interrupts = <11 8>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -384,6 +378,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
diff --git a/src/arm64/freescale/imx8mm-nitrogen-r2.dts b/src/arm64/freescale/imx8mm-nitrogen-r2.dts
index 0e8f0d7..12fb79d 100644
--- a/src/arm64/freescale/imx8mm-nitrogen-r2.dts
+++ b/src/arm64/freescale/imx8mm-nitrogen-r2.dts
@@ -220,7 +220,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c3@0 {
+		i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/src/arm64/freescale/imx8mm-overdrive.dtsi b/src/arm64/freescale/imx8mm-overdrive.dtsi
new file mode 100644
index 0000000..b31436b
--- /dev/null
+++ b/src/arm64/freescale/imx8mm-overdrive.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu_2d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&gpu_3d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&vpu_blk_ctrl {
+	assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+			  <&clk IMX8MM_CLK_VPU_G2>,
+			  <&clk IMX8MM_CLK_VPU_H1>,
+			  <&clk IMX8MM_VPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+				 <&clk IMX8MM_VPU_PLL_OUT>,
+				 <&clk IMX8MM_SYS_PLL3_OUT>;
+	assigned-clock-rates = <750000000>,
+			       <700000000>,
+			       <750000000>,
+			       <700000000>;
+};
diff --git a/src/arm64/freescale/imx8mm-phygate-tauri-l.dts b/src/arm64/freescale/imx8mm-phygate-tauri-l.dts
index 968f475..27a9025 100644
--- a/src/arm64/freescale/imx8mm-phygate-tauri-l.dts
+++ b/src/arm64/freescale/imx8mm-phygate-tauri-l.dts
@@ -120,7 +120,7 @@
 	};
 
 	tpm: tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
 		pinctrl-names = "default";
diff --git a/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts b/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 156d793..ea6e8b8 100644
--- a/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
 	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git a/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi b/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi
index 3a0a10e..752caa3 100644
--- a/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/src/arm64/freescale/imx8mm-venice-gw72xx.dtsi
@@ -84,8 +84,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -152,23 +159,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,3 {
+			pcie@3,0 {
 				reg = <0x1800 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@5,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
@@ -312,6 +326,7 @@
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
diff --git a/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi b/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi
index d79fe9f..2aa6c10 100644
--- a/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/src/arm64/freescale/imx8mm-venice-gw73xx.dtsi
@@ -109,7 +109,7 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};
@@ -179,23 +179,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,4 {
+			pcie@4,0 {
 				reg = <0x2000 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@6,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
diff --git a/src/arm64/freescale/imx8mm-venice-gw7902.dts b/src/arm64/freescale/imx8mm-venice-gw7902.dts
index 06a394a..c11260c 100644
--- a/src/arm64/freescale/imx8mm-venice-gw7902.dts
+++ b/src/arm64/freescale/imx8mm-venice-gw7902.dts
@@ -635,13 +635,16 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		eth1: pcie@1,0 {
+		eth1: ethernet@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
 			local-mac-address = [00 00 00 00 00 00];
 		};
diff --git a/src/arm64/freescale/imx8mm-verdin-mallow.dtsi b/src/arm64/freescale/imx8mm-verdin-mallow.dtsi
new file mode 100644
index 0000000..4a0799d
--- /dev/null
+++ b/src/arm64/freescale/imx8mm-verdin-mallow.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0	0x106>, /* SODIMM 52 */
+			<MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x106>, /* SODIMM 54 */
+			<MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x106>, /* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x146>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x141>; /* SODIMM 66 */
+	};
+};
diff --git a/src/arm64/freescale/imx8mm-verdin-nonwifi-mallow.dts b/src/arm64/freescale/imx8mm-verdin-nonwifi-mallow.dts
new file mode 100644
index 0000000..1b1999f
--- /dev/null
+++ b/src/arm64/freescale/imx8mm-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Mallow";
+	compatible = "toradex,verdin-imx8mm-nonwifi-mallow",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/src/arm64/freescale/imx8mm-verdin-wifi-mallow.dts b/src/arm64/freescale/imx8mm-verdin-wifi-mallow.dts
new file mode 100644
index 0000000..2916145
--- /dev/null
+++ b/src/arm64/freescale/imx8mm-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Mallow";
+	compatible = "toradex,verdin-imx8mm-wifi-mallow",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/src/arm64/freescale/imx8mm.dtsi b/src/arm64/freescale/imx8mm.dtsi
index 738024b..8a1b42b 100644
--- a/src/arm64/freescale/imx8mm.dtsi
+++ b/src/arm64/freescale/imx8mm.dtsi
@@ -636,6 +636,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mm-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -647,7 +649,6 @@
 						<&clk IMX8MM_CLK_AUDIO_AHB>,
 						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 						<&clk IMX8MM_SYS_PLL3>,
-						<&clk IMX8MM_VIDEO_PLL1>,
 						<&clk IMX8MM_AUDIO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 							 <&clk IMX8MM_ARM_PLL_OUT>,
@@ -657,7 +658,6 @@
 							<400000000>,
 							<400000000>,
 							<750000000>,
-							<594000000>,
 							<393216000>;
 			};
 
@@ -1133,7 +1133,7 @@
 				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
 							 <&clk IMX8MM_SYS_PLL2_1000M>,
 							 <&clk IMX8MM_SYS_PLL1_800M>;
-				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				assigned-clock-rates = <24000000>, <500000000>, <200000000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
 				status = "disabled";
@@ -1151,12 +1151,8 @@
 				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
 					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
 				clock-names = "bus_clk", "sclk_mipi";
-				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
-						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
-							 <&clk IMX8MM_CLK_24M>;
-				assigned-clock-rates = <266000000>, <24000000>;
-				samsung,pll-clock-frequency = <24000000>;
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
 				status = "disabled";
@@ -1408,7 +1404,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
@@ -1423,7 +1419,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
diff --git a/src/arm64/freescale/imx8mn-beacon-som.dtsi b/src/arm64/freescale/imx8mn-beacon-som.dtsi
index 90073b1..2a64115 100644
--- a/src/arm64/freescale/imx8mn-beacon-som.dtsi
+++ b/src/arm64/freescale/imx8mn-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mn-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
diff --git a/src/arm64/freescale/imx8mn-bsh-smm-s2-common.dtsi b/src/arm64/freescale/imx8mn-bsh-smm-s2-common.dtsi
index 22a754d..bbb07c6 100644
--- a/src/arm64/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/src/arm64/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
 
 / {
 	chosen {
diff --git a/src/arm64/freescale/imx8mn-bsh-smm-s2-display.dtsi b/src/arm64/freescale/imx8mn-bsh-smm-s2-display.dtsi
new file mode 100644
index 0000000..7675583
--- /dev/null
+++ b/src/arm64/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <50>;
+		status = "okay";
+	};
+
+	reg_3v3_dvdd: regulator-3v3-O3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvdd>;
+		regulator-name = "3v3-dvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v3v3_avdd: regulator-3v3-O2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_avdd>;
+		regulator-name = "3v3-avdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+	status = "okay";
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+	status = "okay";
+};
+
+&pgc_dispmix {
+	assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <500000000>, <200000000>;
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <12000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "sharp,ls068b3sx02", "syna,r63353";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		reg = <0>;
+
+		backlight = <&backlight>;
+		dvdd-supply = <&reg_3v3_dvdd>;
+		avdd-supply = <&reg_v3v3_avdd>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_avdd: avddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
+		>;
+	};
+
+	/* This is for both PWM and voltage regulators for display */
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
+		>;
+	};
+
+	pinctrl_dvdd: dvddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx8mn-dimonoff-gateway-evk.dts b/src/arm64/freescale/imx8mn-dimonoff-gateway-evk.dts
new file mode 100644
index 0000000..6f9b829
--- /dev/null
+++ b/src/arm64/freescale/imx8mn-dimonoff-gateway-evk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som-symphony.dts"
+
+/ {
+	model = "DimOnOff Gateway EVK board";
+	compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn",
+		     "fsl,imx8mn";
+
+	/*
+	 * U30 FPF2193 regulator.
+	 * Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49).
+	 */
+	reg_disp_3v3: regulator-disp-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "Display 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio5 13 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+/* Disable Asynchronous Sample Rate Converter (audio) */
+&easrc {
+	status = "disabled";
+};
+
+&ecspi1 {
+	/* Resistive touch controller */
+	/delete-node/ touchscreen@0;
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	adc@48 {
+		compatible = "ti,ads7924";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adc>;
+		vref-supply = <&reg_disp_3v3>;
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			label = "Pot0";
+		};
+		channel@1 {
+			reg = <1>;
+			label = "Pot1";
+		};
+		channel@2 {
+			reg = <2>;
+			label = "Pot2";
+		};
+		channel@3 {
+			reg = <3>;
+			label = "Pot3";
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		reset-source; /* For watchdog. */
+	};
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reset-source; /* For watchdog. */
+		interrupt-parent = <&gpio5>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */
+	};
+};
+
+&i2c3 {
+	touchscreen@38 {
+		status = "disabled";
+	};
+
+	codec@1a {
+		status = "disabled";
+	};
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		status = "disabled";
+	};
+};
+
+&sai5 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0xc6
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x00000156
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x00000156
+		>;
+	};
+
+	pinctrl_adc: adcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x00000156
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10	0x00000156
+			MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x00000156
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx8mn-evk.dtsi b/src/arm64/freescale/imx8mn-evk.dtsi
index 3f6a198..a0e13d3 100644
--- a/src/arm64/freescale/imx8mn-evk.dtsi
+++ b/src/arm64/freescale/imx8mn-evk.dtsi
@@ -221,12 +221,6 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -238,6 +232,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
diff --git a/src/arm64/freescale/imx8mn-overdrive.dtsi b/src/arm64/freescale/imx8mn-overdrive.dtsi
new file mode 100644
index 0000000..5d03fb8
--- /dev/null
+++ b/src/arm64/freescale/imx8mn-overdrive.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu {
+	assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+			  <&clk IMX8MN_CLK_GPU_SHADER>,
+			  <&clk IMX8MN_CLK_GPU_AXI>,
+			  <&clk IMX8MN_CLK_GPU_AHB>,
+			  <&clk IMX8MN_GPU_PLL>;
+	assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_SYS_PLL1_800M>,
+				  <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <600000000>,
+			       <600000000>,
+			       <800000000>,
+			       <400000000>,
+			       <1200000000>;
+};
diff --git a/src/arm64/freescale/imx8mn-rve-gateway.dts b/src/arm64/freescale/imx8mn-rve-gateway.dts
new file mode 100644
index 0000000..1b633bd
--- /dev/null
+++ b/src/arm64/freescale/imx8mn-rve-gateway.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som.dtsi"
+
+/ {
+	model = "RVE gateway";
+	compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	crystal_duart_24m: crystal-duart-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		key-exit {
+			label = "exit";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+	};
+
+	lcd {
+		compatible = "hit,hd44780";
+		display-height-chars = <2>;
+		display-width-chars = <20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		data-gpios = <&gpio5  1 GPIO_ACTIVE_HIGH>,
+			     <&gpio1  6 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 14 GPIO_ACTIVE_HIGH>,
+			     <&gpio4 28 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 24 GPIO_ACTIVE_HIGH>,
+			     <&gpio5  2 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio1  5 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio3 21 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+
+	duart1: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3",
+				  "RADIO4", "RADIO_RESET", "TP12", "TP11";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+
+	/delete-node/ touchscreen@0;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	duart2: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER",
+				  "GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1",
+				  "GPIO_EXT0", "TP13";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+};
+
+/* Configure PWM pins in GPIO mode: */
+&gpio5 {
+	gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1";
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* Carrier board EEPROM */
+	eeprom_cb: eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3p3v>;
+	};
+
+	lm75: sensor@48 {
+		compatible = "st,stlm75";
+		reg = <0x48>;
+		vs-supply = <&reg_3p3v>;
+	};
+
+	mcp7940: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	codec@1a {
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pcf8574_1: gpio@38 {
+		compatible = "nxp,pcf8574";
+		reg = <0x38>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3",
+				  "TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4",
+				  "LED_B_COMM4";
+	};
+
+	pcf8574_2: gpio@39 {
+		compatible = "nxp,pcf8574";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1",
+				  "LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1",
+				  "TP16", "TP17";
+	};
+};
+
+/* Bluetooth */
+&uart2 {
+	status = "disabled";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD interface on expansion connector. */
+&usdhc2 {
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x13
+			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x13
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1	0xc6 /* Enter */
+			MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23	0xc6 /* Exit */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1		0x00000156 /* D0 */
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x00000156 /* D1 */
+			MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x00000156 /* D2 */
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x00000156 /* D3 */
+			MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24	0x00000156 /* D4 */
+			MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x00000156 /* D5 */
+			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00000156 /* D6 */
+			MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25	0x00000156 /* D7 */
+			MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23	0x00000156 /* E */
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x00000156 /* RS */
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x00000156 /* R/W */
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x00000156 /* A */
+			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x00000156 /* B */
+		>;
+	};
+
+	/* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x41
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts
index 3f1e49b..c07d591 100644
--- a/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts
+++ b/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
 	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git a/src/arm64/freescale/imx8mn-var-som-symphony.dts b/src/arm64/freescale/imx8mn-var-som-symphony.dts
index a7a5744..a6b94d1 100644
--- a/src/arm64/freescale/imx8mn-var-som-symphony.dts
+++ b/src/arm64/freescale/imx8mn-var-som-symphony.dts
@@ -57,6 +57,15 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	/* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */
+	reg_per_3v3: regulator-peripheral-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "per_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &ethphy {
@@ -79,6 +88,7 @@
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		#gpio-cells = <2>;
 		wakeup-source;
+		vcc-supply = <&reg_per_3v3>;
 
 		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
 		usb3-sata-sel-hog {
diff --git a/src/arm64/freescale/imx8mn-var-som.dtsi b/src/arm64/freescale/imx8mn-var-som.dtsi
index b8946ed..b364307 100644
--- a/src/arm64/freescale/imx8mn-var-som.dtsi
+++ b/src/arm64/freescale/imx8mn-var-som.dtsi
@@ -31,6 +31,14 @@
 		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_3v3_fixed: regulator-3v3-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &A53_0 {
@@ -234,6 +242,7 @@
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 		pagesize = <16>;
+		vcc-supply = <&reg_3v3_fixed>;
 	};
 };
 
diff --git a/src/arm64/freescale/imx8mn.dtsi b/src/arm64/freescale/imx8mn.dtsi
index 1bb1d0c..136e75c 100644
--- a/src/arm64/freescale/imx8mn.dtsi
+++ b/src/arm64/freescale/imx8mn.dtsi
@@ -637,6 +637,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mn-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
diff --git a/src/arm64/freescale/imx8mp-beacon-kit.dts b/src/arm64/freescale/imx8mp-beacon-kit.dts
index 0bea079..a080574 100644
--- a/src/arm64/freescale/imx8mp-beacon-kit.dts
+++ b/src/arm64/freescale/imx8mp-beacon-kit.dts
@@ -94,6 +94,17 @@
 		};
 	};
 
+	bridge-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -153,6 +164,21 @@
 		enable-active-high;
 	};
 
+	sound-adv7535 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-adv7535";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+
 	sound-dmic {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "sound-pdm";
@@ -208,7 +234,7 @@
 	status = "okay";
 
 	tpm: tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
@@ -274,6 +300,35 @@
 		#interrupt-cells = <2>;
 	};
 
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
 	pcieclk: clock-generator@68 {
 		compatible = "renesas,9fgv0241";
 		reg = <0x68>;
@@ -398,6 +453,10 @@
 	};
 };
 
+&lcdif1 {
+	status = "okay";
+};
+
 &micfil {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pdm>;
@@ -407,6 +466,21 @@
 	status = "okay";
 };
 
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -433,6 +507,16 @@
 	status = "okay";
 };
 
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -612,6 +696,14 @@
 		>;
 	};
 
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0xd6
+		>;
+	};
+
 	pinctrl_tpm: tpmgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19 /* Reset */
diff --git a/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts b/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts
index d98a040..5828c9d 100644
--- a/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -486,7 +486,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usb3_phy0 {
diff --git a/src/arm64/freescale/imx8mp-debix-model-a.dts b/src/arm64/freescale/imx8mp-debix-model-a.dts
index 267ceff..2c19766 100644
--- a/src/arm64/freescale/imx8mp-debix-model-a.dts
+++ b/src/arm64/freescale/imx8mp-debix-model-a.dts
@@ -75,7 +75,7 @@
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
-	phy-connection-type = "rgmii-id";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	status = "okay";
 
diff --git a/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts b/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts
index 0afd902..b11d694 100644
--- a/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts
+++ b/src/arm64/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -63,6 +63,50 @@
 		regulator-always-on;
 	};
 
+	reg_csi1_1v8: regulator-csi1-vdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI1_VDD1V8";
+		gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi1_3v3: regulator-csi1-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI1_VDD3V3";
+		gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
+	reg_csi2_1v8: regulator-csi2-vdd1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_1v8>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI2_VDD1V8";
+		gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi2_3v3: regulator-csi2-vdd3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI2_VDD3V3";
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
 	regulator-vbus-usb20 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <5000000>;
@@ -413,6 +457,18 @@
 		>;
 	};
 
+	pinctrl_reg_csi2_1v8: regcsi21v8grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x19
+		>;
+	};
+
+	pinctrl_reg_csi2_3v3: regcsi23v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x19
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x14f
diff --git a/src/arm64/freescale/imx8mp-debix-som-a.dtsi b/src/arm64/freescale/imx8mp-debix-som-a.dtsi
index bc312aa..91094c2 100644
--- a/src/arm64/freescale/imx8mp-debix-som-a.dtsi
+++ b/src/arm64/freescale/imx8mp-debix-som-a.dtsi
@@ -6,6 +6,8 @@
 
 #include "imx8mp.dtsi"
 
+#include <dt-bindings/leds/common.h>
+
 / {
 	model = "Polyhex i.MX8MPlus Debix SOM A";
 	compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
@@ -20,6 +22,20 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
 };
 
 &A53_0 {
@@ -203,6 +219,12 @@
 };
 
 &iomuxc {
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x19
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
diff --git a/src/arm64/freescale/imx8mp-dhcom-som.dtsi b/src/arm64/freescale/imx8mp-dhcom-som.dtsi
index d8963f3..43f1d45 100644
--- a/src/arm64/freescale/imx8mp-dhcom-som.dtsi
+++ b/src/arm64/freescale/imx8mp-dhcom-som.dtsi
@@ -255,7 +255,7 @@
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
-		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 
 		ports {
@@ -420,6 +420,18 @@
 		reg = <0x53>;
 	};
 
+	eeprom0wl: eeprom@58 {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x50 */
+		pagesize = <32>;
+		reg = <0x58>;
+	};
+
+	eeprom1wl: eeprom@5b {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x53 */
+		pagesize = <32>;
+		reg = <0x5b>;
+	};
+
 	ioexp: gpio@74 {
 		compatible = "nxp,pca9539";
 		reg = <0x74>;
diff --git a/src/arm64/freescale/imx8mp-evk.dts b/src/arm64/freescale/imx8mp-evk.dts
index cc9d468..f87fa5a 100644
--- a/src/arm64/freescale/imx8mp-evk.dts
+++ b/src/arm64/freescale/imx8mp-evk.dts
@@ -137,6 +137,28 @@
 		};
 
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_vdev0vring0: vdev0vring0@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: vdev0vring1@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: vdev0buffer@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+	};
 };
 
 &flexspi {
diff --git a/src/arm64/freescale/imx8mp-msc-sm2s-ep1.dts b/src/arm64/freescale/imx8mp-msc-sm2s-ep1.dts
index e4215c8..da4b180 100644
--- a/src/arm64/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/src/arm64/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -57,8 +57,8 @@
 		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
 		#sound-dai-cells = <0>;
 
-		VDDA-supply  = <&reg_vcc_3v3_audio>;
-		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDA-supply = <&reg_vcc_3v3_audio>;
+		VDDD-supply = <&reg_vcc_1v8_audio>;
 		VDDIO-supply = <&reg_vcc_1v8_audio>;
 	};
 };
diff --git a/src/arm64/freescale/imx8mp-skov-reva.dtsi b/src/arm64/freescale/imx8mp-skov-reva.dtsi
new file mode 100644
index 0000000..59813ef
--- /dev/null
+++ b/src/arm64/freescale/imx8mp-skov-reva.dtsi
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "imx8mp.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		/* some of this aliases like backlight0, ethernetX and switch0
+		 * are needed for the bootloader.
+		 */
+		backlight0 = &backlight;
+		ethernet0 = &eqos;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+		switch0 = &switch;
+	};
+
+	/*
+	 * Backlight is present only on some of boards, so it is disabled by
+	 * default.
+	 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 20000 0>;
+		power-supply = <&reg_24v>;
+		enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "D1";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_p>;
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/*
+	 * This regulator will provide power as long as possible even if
+	 * undervoltage is detected.
+	 */
+	reg_5v_p: regulator-5v-p {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_P";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/*
+	 * This regulator will be automatically shutdown if undervoltage is
+	 * detected.
+	 */
+	reg_5v_s: regulator-5v-s {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_S";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v: regulator-24v {
+		compatible = "regulator-fixed";
+		regulator-name = "24V";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	reg_can2rs: regulator-can2rs {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN2RS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2rs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_canrs: regulator-canrs {
+		compatible = "regulator-fixed";
+		regulator-name = "CANRS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_canrs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm4 0 20000 0>;
+		regulator-name = "VCOM";
+		vin-supply = <&reg_5v_s>;
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+		status = "disabled";
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		vin-supply = <&reg_vdd_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_vdd_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-txid";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_canrs>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2rs>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
+		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram_1v1: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs_1v8: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda_1v8: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd2: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063tp";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <380000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9893";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_switch>;
+		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		reg = <0x5f>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				phy-mode = "internal";
+				label = "lan1";
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				phy-mode = "internal";
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "cpu";
+				ethernet = <&eqos>;
+				phy-mode = "rgmii";
+				/* 2ns RX delay is implemented on PCB */
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <0>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24			0x0100
+		>;
+	};
+
+	pinctrl_can2rs: can2rsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22			0x154
+		>;
+	};
+
+	pinctrl_canrs: canrsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21			0x154
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO			0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13			0x40
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX				0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX				0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX				0x154
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX				0x154
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05			0x19
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06			0x19
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07			0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL				0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03			0x41
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04			0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT			0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: regvsd3v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31			0x41
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00			0x41
+			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01			0x41
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28			0x41
+			/* CTP_RST */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29			0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX			0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX			0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS			0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX			0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX			0x14f
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12			0x1c4
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx8mp-skov-revb-hdmi.dts b/src/arm64/freescale/imx8mp-skov-revb-hdmi.dts
new file mode 100644
index 0000000..c1ca69d
--- /dev/null
+++ b/src/arm64/freescale/imx8mp-skov-revb-hdmi.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - HDMI";
+	compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
+};
+
+&iomuxc {
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL		0x1c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA		0x1c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD			0x19
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx8mp-skov-revb-lt6.dts b/src/arm64/freescale/imx8mp-skov-revb-lt6.dts
new file mode 100644
index 0000000..ccbd3ab
--- /dev/null
+++ b/src/arm64/freescale/imx8mp-skov-revb-lt6.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - LT6";
+	compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp";
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+	};
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3600000>;
+	regulator-max-microvolt = <3600000>;
+	voltage-table = <3600000 26>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names ="default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO			0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09			0x40
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25			0x40
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/src/arm64/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
new file mode 100644
index 0000000..3c2efdc
--- /dev/null
+++ b/src/arm64/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1";
+	compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp";
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <482300000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&media_blk_ctrl {
+	/* currently it is not possible to let display clocks confugure
+	 * automatically, so we need to set them manually
+	 */
+	assigned-clock-rates = <500000000>, <200000000>, <0>,
+		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
+		<68900000>,
+		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
+		<964600000>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA				0x400001c2
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso b/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
new file mode 100644
index 0000000..5058cd9
--- /dev/null
+++ b/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+&{/} {
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "auo,g133han01";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dual-lvds-odd-pixels;
+
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-even-pixels;
+
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <988400000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
diff --git a/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 4240e20..86d3da3 100644
--- a/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -15,6 +15,7 @@
 / {
 	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
 	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &uart4;
@@ -55,6 +56,21 @@
 		clock-frequency = <25000000>;
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		pinctrl-names = "default";
@@ -168,6 +184,13 @@
 		enable-active-high;
 	};
 
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vcc_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -464,7 +487,7 @@
 		clock-names = "mclk";
 		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
 		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
-		iov-supply = <&reg_vcc_3v3>;
+		iov-supply = <&reg_vcc_1v8>;
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
@@ -602,7 +625,6 @@
 &usb3_1 {
 	fsl,disable-port-power-control;
 	fsl,permanently-attached;
-	dr_mode = "host";
 	status = "okay";
 };
 
@@ -626,13 +648,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "X29";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon0>;
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
index bf47b5e..0e8d0f3 100644
--- a/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -132,13 +147,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
index f942e94..41c79d2 100644
--- a/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -83,8 +98,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio4 {
@@ -175,13 +197,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
@@ -285,6 +304,7 @@
 			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
 			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
 			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
diff --git a/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
index b0d42b1..d5c400b 100644
--- a/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -100,7 +115,7 @@
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};
@@ -201,13 +216,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/src/arm64/freescale/imx8mp-venice-gw74xx.dts b/src/arm64/freescale/imx8mp-venice-gw74xx.dts
index 2ab9f4c..cae586c 100644
--- a/src/arm64/freescale/imx8mp-venice-gw74xx.dts
+++ b/src/arm64/freescale/imx8mp-venice-gw74xx.dts
@@ -35,6 +35,21 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
+	connector {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -181,9 +196,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "tcg,tpm_tis-spi";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x0>;
 		spi-max-frequency = <36000000>;
 	};
@@ -694,13 +707,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/src/arm64/freescale/imx8mp-verdin-mallow.dtsi b/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
new file mode 100644
index 0000000..8482393
--- /dev/null
+++ b/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MP SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&eqos {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x106>, /* SODIMM 52 */
+			<MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x106>, /* SODIMM 54 */
+			<MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x106>, /* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x82>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git a/src/arm64/freescale/imx8mp-verdin-nonwifi-mallow.dts b/src/arm64/freescale/imx8mp-verdin-nonwifi-mallow.dts
new file mode 100644
index 0000000..6a536a4
--- /dev/null
+++ b/src/arm64/freescale/imx8mp-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-mallow",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/src/arm64/freescale/imx8mp-verdin-wifi-mallow.dts b/src/arm64/freescale/imx8mp-verdin-wifi-mallow.dts
new file mode 100644
index 0000000..08b7aef
--- /dev/null
+++ b/src/arm64/freescale/imx8mp-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-wifi-mallow",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/src/arm64/freescale/imx8mp-verdin.dtsi b/src/arm64/freescale/imx8mp-verdin.dtsi
index 04f2083..c3305f0 100644
--- a/src/arm64/freescale/imx8mp-verdin.dtsi
+++ b/src/arm64/freescale/imx8mp-verdin.dtsi
@@ -45,6 +45,23 @@
 		status = "disabled";
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -835,15 +852,10 @@
 	srp-disable;
 	usb-role-switch;
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-		label = "Type-C";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_1_id>;
-		self-powered;
-		type = "micro";
-		vbus-supply = <&reg_usb1_vbus>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/src/arm64/freescale/imx8mp.dtsi b/src/arm64/freescale/imx8mp.dtsi
index 1264da6..39a550c 100644
--- a/src/arm64/freescale/imx8mp.dtsi
+++ b/src/arm64/freescale/imx8mp.dtsi
@@ -264,6 +264,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 	};
 
@@ -726,6 +727,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mp-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -793,8 +796,8 @@
 							 <&clk IMX8MP_CLK_AUDIO_AXI>;
 						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
 								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
-						assigned-clock-parents =  <&clk IMX8MP_SYS_PLL1_800M>,
-									  <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
 						assigned-clock-rates = <400000000>,
 								       <600000000>;
 					};
@@ -887,6 +890,15 @@
 						clocks = <&clk IMX8MP_CLK_ML_AXI>,
 							 <&clk IMX8MP_CLK_ML_AHB>,
 							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+								  <&clk IMX8MP_CLK_ML_AXI>,
+								  <&clk IMX8MP_CLK_ML_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>,
+								       <800000000>,
+								       <300000000>;
 					};
 				};
 			};
@@ -1808,7 +1820,7 @@
 					compatible = "fsl,imx8mp-ldb";
 					reg = <0x5c 0x4>, <0x128 0x4>;
 					reg-names = "ldb", "lvds";
-					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB_ROOT>;
 					clock-names = "ldb";
 					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
 					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
@@ -2012,6 +2024,18 @@
 			interconnect-names = "g1", "g2", "vc8000e";
 		};
 
+		npu: npu@38500000 {
+			compatible = "vivante,gc";
+			reg = <0x38500000 0x200000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_ML_AXI>,
+				 <&clk IMX8MP_CLK_ML_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			power-domains = <&pgc_mlmix>;
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
diff --git a/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts b/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts
index 6376417..d8cf1f2 100644
--- a/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -65,7 +65,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <43000000>;
 	};
diff --git a/src/arm64/freescale/imx8mq-phanbell.dts b/src/arm64/freescale/imx8mq-phanbell.dts
index a3b9d61..e34045d 100644
--- a/src/arm64/freescale/imx8mq-phanbell.dts
+++ b/src/arm64/freescale/imx8mq-phanbell.dts
@@ -39,7 +39,7 @@
 
 	fan: gpio-fan {
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 8600 1>;
+		gpio-fan,speed-map = <0 0>, <8600 1>;
 		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 		#cooling-cells = <2>;
 		pinctrl-names = "default";
diff --git a/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts b/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts
index 0d8def2..b302dac 100644
--- a/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
 	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git a/src/arm64/freescale/imx8qm-ss-dma.dtsi b/src/arm64/freescale/imx8qm-ss-dma.dtsi
index 8439dd6..69cb867 100644
--- a/src/arm64/freescale/imx8qm-ss-dma.dtsi
+++ b/src/arm64/freescale/imx8qm-ss-dma.dtsi
@@ -128,21 +128,25 @@
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
 	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dma-names = "rx","tx";
 };
 
 &i2c0 {
diff --git a/src/arm64/freescale/imx8qxp-mek.dts b/src/arm64/freescale/imx8qxp-mek.dts
index 9961172..8360bb8 100644
--- a/src/arm64/freescale/imx8qxp-mek.dts
+++ b/src/arm64/freescale/imx8qxp-mek.dts
@@ -31,7 +31,7 @@
 	};
 
 	gpio-sbu-mux {
-		compatible = "gpio-sbu-mux";
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec_mux>;
 		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
@@ -50,6 +50,10 @@
 	status = "okay";
 };
 
+&dsp_reserved {
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -152,12 +156,6 @@
 		interrupt-parent = <&lsio_gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
-		port {
-			typec_dr_sw: endpoint {
-				remote-endpoint = <&usb3_drd_sw>;
-			};
-		};
-
 		usb_con1: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -169,8 +167,17 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
 				port@1 {
 					reg = <1>;
+
 					typec_con_ss: endpoint {
 						remote-endpoint = <&usb3_data_ss>;
 					};
diff --git a/src/arm64/freescale/imx8qxp-ss-vpu.dtsi b/src/arm64/freescale/imx8qxp-ss-vpu.dtsi
new file mode 100644
index 0000000..7894a3a
--- /dev/null
+++ b/src/arm64/freescale/imx8qxp-ss-vpu.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+};
+
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+};
+
+/delete-node/ &mu2_m0;
+/delete-node/ &vpu_core2;
diff --git a/src/arm64/freescale/imx8qxp.dtsi b/src/arm64/freescale/imx8qxp.dtsi
index c80c85a..958267b 100644
--- a/src/arm64/freescale/imx8qxp.dtsi
+++ b/src/arm64/freescale/imx8qxp.dtsi
@@ -48,7 +48,6 @@
 		serial3 = &lpuart3;
 		vpu-core0 = &vpu_core0;
 		vpu-core1 = &vpu_core1;
-		vpu-core2 = &vpu_core2;
 	};
 
 	cpus {
@@ -184,6 +183,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 
 		encoder_rpc: encoder-rpc@94400000 {
@@ -317,6 +317,7 @@
 };
 
 #include "imx8qxp-ss-img.dtsi"
+#include "imx8qxp-ss-vpu.dtsi"
 #include "imx8qxp-ss-adma.dtsi"
 #include "imx8qxp-ss-conn.dtsi"
 #include "imx8qxp-ss-lsio.dtsi"
diff --git a/src/arm64/freescale/imx93-11x11-evk.dts b/src/arm64/freescale/imx93-11x11-evk.dts
index 2b9d477..9921ea1 100644
--- a/src/arm64/freescale/imx93-11x11-evk.dts
+++ b/src/arm64/freescale/imx93-11x11-evk.dts
@@ -76,6 +76,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
 		enable-active-high;
 	};
 };
@@ -237,18 +238,19 @@
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
 			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
@@ -265,14 +267,15 @@
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
diff --git a/src/arm64/freescale/imx93-tqma9352-mba93xxca.dts b/src/arm64/freescale/imx93-tqma9352-mba93xxca.dts
new file mode 100644
index 0000000..af795ec
--- /dev/null
+++ b/src/arm64/freescale/imx93-tqma9352-mba93xxca.dts
@@ -0,0 +1,709 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa93xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba93xxca",
+		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm5 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_12v0>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				cpu_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				cpu_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&cpu_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&cpu_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	expander-irq-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PEX_INT#";
+	};
+
+	tcpc-irq-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "USB_C_ALERT#";
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the on board USB Hub reset which is low
+		 * active as reset signal. The output-low states, the
+		 * signal is inactive, e.g. no reset
+		 */
+		usb-reset-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "USB_RESET#";
+		};
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-high states, the signal
+		 * is active, e.g. card is powered down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-high states, the signal
+		 * is active, e.g. card is disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-high states, the signal
+		 * is active, e.g. card in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "DP_EN",
+				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5>;
+	status = "okay";
+};
+
+&lpspi6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	pinctrl-1 = <&pinctrl_lpspi6>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&tpm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x51e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1306
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+		>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x1306
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX		0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX		0x139e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO00__LPSPI6_PCS0		0x3fe
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN		0x3fe
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT		0x3fe
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK		0x3fe
+		>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1306
+		>;
+	};
+
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO09__GPIO2_IO09		0x1306
+		>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO06__TPM5_CH0		0x57e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__TPM6_CH0		0x57e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__GPIO1_IO02		0x1306
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
+			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B   0x51e
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO14__LPUART3_TX		0x31e
+			MX93_PAD_GPIO_IO15__LPUART3_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO04__LPUART6_TX		0x31e
+			MX93_PAD_GPIO_IO05__LPUART6_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
+			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17be
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			/* HYS | PD | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx93-tqma9352-mba93xxla.dts b/src/arm64/freescale/imx93-tqma9352-mba93xxla.dts
index 3c5c67e..eb3f4cf 100644
--- a/src/arm64/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/src/arm64/freescale/imx93-tqma9352-mba93xxla.dts
@@ -18,6 +18,7 @@
 	model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
 	compatible = "tq,imx93-tqma9352-mba93xxla",
 		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &lpuart1;
diff --git a/src/arm64/freescale/imx93.dtsi b/src/arm64/freescale/imx93.dtsi
index 34c0540..8f2e7c4 100644
--- a/src/arm64/freescale/imx93.dtsi
+++ b/src/arm64/freescale/imx93.dtsi
@@ -171,6 +171,18 @@
 		status = "disabled";
 	};
 
+	mqs1: mqs1 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&aonmix_ns_gpr>;
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&wakeupmix_gpr>;
+		status = "disabled";
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -282,6 +294,19 @@
 				status = "disabled";
 			};
 
+			i3c1: i3c-master@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_I3C1_GATE>,
+					 <&clk IMX93_CLK_I3C1_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
@@ -367,6 +392,19 @@
 				status = "disabled";
 			};
 
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			iomuxc: pinctrl@443c0000 {
 				compatible = "fsl,imx93-iomuxc";
 				reg = <0x443c0000 0x10000>;
@@ -395,6 +433,8 @@
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
 				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+				assigned-clock-rates = <393216000>;
 				status = "okay";
 			};
 
@@ -422,9 +462,10 @@
 				};
 			};
 
-			anatop: anatop@44480000 {
-				compatible = "fsl,imx93-anatop", "syscon";
+			clock-controller@44480000 {
+				compatible = "fsl,imx93-anatop";
 				reg = <0x44480000 0x2000>;
+				#clock-cells = <1>;
 			};
 
 			tmu: tmu@44482000 {
@@ -447,6 +488,21 @@
 				#thermal-sensor-cells = <1>;
 			};
 
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_PDM_IPG>,
+					 <&clk IMX93_CLK_PDM_GATE>,
+					 <&clk IMX93_CLK_AUDIO_PLL>;
+				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+				dmas = <&edma1 29 0 5>;
+				dma-names = "rx";
+				status = "disabled";
+			};
 
 			adc1: adc@44530000 {
 				compatible = "nxp,imx93-adc";
@@ -473,7 +529,6 @@
 				compatible = "fsl,imx93-edma4";
 				reg = <0x42000000 0x210000>;
 				#dma-cells = <3>;
-				shared-interrupt;
 				dma-channels = <64>;
 				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
@@ -616,6 +671,19 @@
 				status = "disabled";
 			};
 
+			i3c2: i3c-master@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_I3C2_GATE>,
+					 <&clk IMX93_CLK_I3C2_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
@@ -738,6 +806,51 @@
 				status = "disabled";
 			};
 
+			sai2: sai@42650000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx93-xcvr";
+				reg = <0x42680000 0x800>,
+				      <0x42680800 0x400>,
+				      <0x42680c00 0x080>,
+				      <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_SPDIF_GATE>,
+					 <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			lpuart7: serial@42690000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42690000 0x1000>;
@@ -755,7 +868,7 @@
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
 				clock-names = "ipg";
-				dmas =  <&edma2 90 0 1>, <&edma2 89 0 0>;
+				dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -874,7 +987,7 @@
 					 <&clk IMX93_CLK_USDHC1_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <8>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
@@ -888,7 +1001,7 @@
 					 <&clk IMX93_CLK_USDHC2_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
@@ -951,7 +1064,7 @@
 					 <&clk IMX93_CLK_USDHC3_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
diff --git a/src/arm64/hisilicon/hikey970-pmic.dtsi b/src/arm64/hisilicon/hikey970-pmic.dtsi
index 970047f..299c4ab 100644
--- a/src/arm64/hisilicon/hikey970-pmic.dtsi
+++ b/src/arm64/hisilicon/hikey970-pmic.dtsi
@@ -10,10 +10,9 @@
 / {
 	spmi: spmi@fff24000 {
 		compatible = "hisilicon,kirin970-spmi-controller";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
 		#address-cells = <2>;
 		#size-cells = <0>;
-		status = "okay";
-		reg = <0x0 0xfff24000 0x0 0x1000>;
 		hisilicon,spmi-channel = <2>;
 
 		pmic: pmic@0 {
@@ -25,9 +24,6 @@
 			gpios = <&gpio28 0 0>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ldo3: ldo3 { /* HDMI */
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1500000>;
diff --git a/src/arm64/intel/socfpga_agilex.dtsi b/src/arm64/intel/socfpga_agilex.dtsi
index d3adb6a..76aafa1 100644
--- a/src/arm64/intel/socfpga_agilex.dtsi
+++ b/src/arm64/intel/socfpga_agilex.dtsi
@@ -60,6 +60,25 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,agilex-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,agilex-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
@@ -130,7 +149,7 @@
 		compatible = "usb-nop-xceiv";
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -138,13 +157,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,agilex-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -368,7 +380,7 @@
 			pinctrl-single,function-mask = <0x0000000f>;
 		};
 
-		pinctrl1: pinconf@ffd13100 {
+		pinctrl1: pinctrl@ffd13100 {
 			compatible = "pinctrl-single";
 			#pinctrl-cells = <1>;
 			reg = <0xffd13100 0x20>;
@@ -659,17 +671,5 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,agilex-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,agilex-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 };
diff --git a/src/arm64/intel/socfpga_agilex5.dtsi b/src/arm64/intel/socfpga_agilex5.dtsi
index dcdaf70..d66d425 100644
--- a/src/arm64/intel/socfpga_agilex5.dtsi
+++ b/src/arm64/intel/socfpga_agilex5.dtsi
@@ -73,7 +73,7 @@
 		ranges;
 		#interrupt-cells = <3>;
 		#address-cells = <2>;
-		#size-cells =<2>;
+		#size-cells = <2>;
 		interrupt-controller;
 		#redistributor-regions = <1>;
 		redistributor-stride = <0x0 0x20000>;
@@ -315,7 +315,7 @@
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
 			dmas = <&dmac0 2>, <&dmac0 3>;
-			dma-names ="tx", "rx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 
 		};
diff --git a/src/arm64/intel/socfpga_agilex_n6000.dts b/src/arm64/intel/socfpga_agilex_n6000.dts
index 1a32840c..d22de06 100644
--- a/src/arm64/intel/socfpga_agilex_n6000.dts
+++ b/src/arm64/intel/socfpga_agilex_n6000.dts
@@ -26,7 +26,7 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		bus@80000000 {
 			compatible = "simple-bus";
 			reg = <0x80000000 0x60000000>,
diff --git a/src/arm64/intel/socfpga_agilex_socdk.dts b/src/arm64/intel/socfpga_agilex_socdk.dts
index 0536906..ad99aef 100644
--- a/src/arm64/intel/socfpga_agilex_socdk.dts
+++ b/src/arm64/intel/socfpga_agilex_socdk.dts
@@ -113,8 +113,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm64/intel/socfpga_n5x_socdk.dts b/src/arm64/intel/socfpga_n5x_socdk.dts
index 5ddfdff..2d70a92 100644
--- a/src/arm64/intel/socfpga_n5x_socdk.dts
+++ b/src/arm64/intel/socfpga_n5x_socdk.dts
@@ -25,12 +25,11 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		sdram_edac: memory-controller@f87f8000 {
 			compatible = "snps,ddrc-3.80a";
 			reg = <0xf87f8000 0x400>;
 			interrupts = <0 175 4>;
-			status = "okay";
 		};
 	};
 };
@@ -91,8 +90,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/src/arm64/lg/lg1312.dtsi b/src/arm64/lg/lg1312.dtsi
index 48ec4eb..b864ffa 100644
--- a/src/arm64/lg/lg1312.dtsi
+++ b/src/arm64/lg/lg1312.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git a/src/arm64/lg/lg1313.dtsi b/src/arm64/lg/lg1313.dtsi
index 3869460..996fb39 100644
--- a/src/arm64/lg/lg1313.dtsi
+++ b/src/arm64/lg/lg1313.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git a/src/arm64/marvell/ac5x-rd-carrier-cn9131.dts b/src/arm64/marvell/ac5x-rd-carrier-cn9131.dts
new file mode 100644
index 0000000..2a0b070
--- /dev/null
+++ b/src/arm64/marvell/ac5x-rd-carrier-cn9131.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * Utilizing the CN913x COM Express CPU module board.
+ * This specific carrier board in this mode of operation (external)
+ * only maintains a PCIe link with the CPU module,
+ * which does not require any special DTS definitions.
+ *
+ * AC5X RD works here in external mode (switch selectable at the back of the
+ * board), and connect via an external cable a kit
+ * which would allow it to use an external CN9131 CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier, only on the
+ * CN9131 COM Express CPU module.
+ * What runs the Linux is the CN9131 on the COM Express CPU module,
+ * And it accesses the switch end-point on the AC5X RD portion of the carrier
+ * via PCIe.
+ */
+
+#include "cn9131-db-comexpress.dtsi"
+#include "ac5x-rd-carrier.dtsi"
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module";
+	compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier",
+			"marvell,cn9131-cpu-module", "marvell,cn9131",
+			"marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x2 0x00000000>;
+	};
+
+};
diff --git a/src/arm64/marvell/ac5x-rd-carrier.dtsi b/src/arm64/marvell/ac5x-rd-carrier.dtsi
new file mode 100644
index 0000000..f98629a
--- /dev/null
+++ b/src/arm64/marvell/ac5x-rd-carrier.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * This specific board in external mode (see below) only maintains
+ * a PCIe link with the COM Express CPU module, which does not
+ * require any special DTS definitions.
+ *
+ * AC5X RD can either work as you would expect, as a complete standalone
+ * box using the internal CPU, or you can move the switch on the back of
+ * the box to "external" mode, and connect via an external cable a kit
+ * which would allow it to use an external CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ * This is a development/reference solution, not a full commercial solution,
+ * hence it was designed with the flexibility to be configured in different
+ * modes of operation.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier,
+ * only on the COM Express CPU module.
+ */
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
+	compatible = "marvell,rd-ac5x-carrier";
+
+};
diff --git a/src/arm64/marvell/armada-3720-espressobin-ultra.dts b/src/arm64/marvell/armada-3720-espressobin-ultra.dts
index f9abef8..870bb38 100644
--- a/src/arm64/marvell/armada-3720-espressobin-ultra.dts
+++ b/src/arm64/marvell/armada-3720-espressobin-ultra.dts
@@ -126,32 +126,32 @@
 
 	reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
 
-	ports {
-		switch0port1: port@1 {
+	ethernet-ports {
+		switch0port1: ethernet-port@1 {
 			reg = <1>;
 			label = "lan0";
 			phy-handle = <&switch0phy0>;
 		};
 
-		switch0port2: port@2 {
+		switch0port2: ethernet-port@2 {
 			reg = <2>;
 			label = "lan1";
 			phy-handle = <&switch0phy1>;
 		};
 
-		switch0port3: port@3 {
+		switch0port3: ethernet-port@3 {
 			reg = <3>;
 			label = "lan2";
 			phy-handle = <&switch0phy2>;
 		};
 
-		switch0port4: port@4 {
+		switch0port4: ethernet-port@4 {
 			reg = <4>;
 			label = "lan3";
 			phy-handle = <&switch0phy3>;
 		};
 
-		switch0port5: port@5 {
+		switch0port5: ethernet-port@5 {
 			reg = <5>;
 			label = "wan";
 			phy-handle = <&extphy>;
@@ -160,7 +160,7 @@
 	};
 
 	mdio {
-		switch0phy3: switch0phy3@14 {
+		switch0phy3: ethernet-phy@14 {
 			reg = <0x14>;
 		};
 	};
diff --git a/src/arm64/marvell/armada-3720-espressobin.dtsi b/src/arm64/marvell/armada-3720-espressobin.dtsi
index 49cbdb5..fed2dce 100644
--- a/src/arm64/marvell/armada-3720-espressobin.dtsi
+++ b/src/arm64/marvell/armada-3720-espressobin.dtsi
@@ -145,19 +145,17 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0port0: port@0 {
+			switch0port0: ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
@@ -168,19 +166,19 @@
 				};
 			};
 
-			switch0port1: port@1 {
+			switch0port1: ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			switch0port2: port@2 {
+			switch0port2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
 			};
 
-			switch0port3: port@3 {
+			switch0port3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -192,13 +190,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git a/src/arm64/marvell/armada-3720-gl-mv1000.dts b/src/arm64/marvell/armada-3720-gl-mv1000.dts
index b1b45b4..63fbc83 100644
--- a/src/arm64/marvell/armada-3720-gl-mv1000.dts
+++ b/src/arm64/marvell/armada-3720-gl-mv1000.dts
@@ -152,31 +152,29 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports: ports {
+		ports: ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
@@ -185,7 +183,7 @@
 				nvmem-cell-names = "mac-address";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -199,13 +197,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git a/src/arm64/marvell/armada-3720-turris-mox.dts b/src/arm64/marvell/armada-3720-turris-mox.dts
index 9eab2bb..f1a9f22 100644
--- a/src/arm64/marvell/armada-3720-turris-mox.dts
+++ b/src/arm64/marvell/armada-3720-turris-mox.dts
@@ -130,7 +130,7 @@
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 		interrupt-parent = <&gpiosb>;
-		interrupts = <5 0>; /* GPIO2_5 */
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
 	};
 };
 
@@ -304,9 +304,15 @@
 		reg = <1>;
 	};
 
-	/* switch nodes are enabled by U-Boot if modules are present */
+	/*
+	 * NOTE: switch nodes are enabled by U-Boot if modules are present
+	 * DO NOT change this node name (switch0@10) even if it is not following
+	 * conventions! Deployed U-Boot binaries are explicitly looking for
+	 * this node in order to augment the device tree!
+	 * Also do not touch the "ports" or "port@n" nodes. These are also ABI.
+	 */
 	switch0@10 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x10>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -317,35 +323,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -430,8 +436,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch0@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -442,19 +449,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1_topaz: switch0phy1@11 {
+			switch0phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy2_topaz: switch0phy2@12 {
+			switch0phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy3_topaz: switch0phy3@13 {
+			switch0phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy4_topaz: switch0phy4@14 {
+			switch0phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -497,8 +504,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@11 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x11>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -509,35 +517,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1: switch1phy1@1 {
+			switch1phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch1phy2: switch1phy2@2 {
+			switch1phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch1phy3: switch1phy3@3 {
+			switch1phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch1phy4: switch1phy4@4 {
+			switch1phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch1phy5: switch1phy5@5 {
+			switch1phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch1phy6: switch1phy6@6 {
+			switch1phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch1phy7: switch1phy7@7 {
+			switch1phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch1phy8: switch1phy8@8 {
+			switch1phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -622,8 +630,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -634,19 +643,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1_topaz: switch1phy1@11 {
+			switch1phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch1phy2_topaz: switch1phy2@12 {
+			switch1phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch1phy3_topaz: switch1phy3@13 {
+			switch1phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch1phy4_topaz: switch1phy4@14 {
+			switch1phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -689,8 +698,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@12 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x12>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -701,35 +711,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1: switch2phy1@1 {
+			switch2phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch2phy2: switch2phy2@2 {
+			switch2phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch2phy3: switch2phy3@3 {
+			switch2phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch2phy4: switch2phy4@4 {
+			switch2phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch2phy5: switch2phy5@5 {
+			switch2phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch2phy6: switch2phy6@6 {
+			switch2phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch2phy7: switch2phy7@7 {
+			switch2phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch2phy8: switch2phy8@8 {
+			switch2phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -805,8 +815,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -817,19 +828,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1_topaz: switch2phy1@11 {
+			switch2phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch2phy2_topaz: switch2phy2@12 {
+			switch2phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch2phy3_topaz: switch2phy3@13 {
+			switch2phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch2phy4_topaz: switch2phy4@14 {
+			switch2phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/src/arm64/marvell/armada-7040-mochabin.dts b/src/arm64/marvell/armada-7040-mochabin.dts
index 4820281..40b7ee7 100644
--- a/src/arm64/marvell/armada-7040-mochabin.dts
+++ b/src/arm64/marvell/armada-7040-mochabin.dts
@@ -301,10 +301,8 @@
 	};
 
 	/* 88E6141 Topaz switch */
-	switch: switch@3 {
+	switch: ethernet-switch@3 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <3>;
 
 		pinctrl-names = "default";
@@ -314,35 +312,35 @@
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swport1: port@1 {
+			swport1: ethernet-port@1 {
 				reg = <1>;
 				label = "lan0";
 				phy-handle = <&swphy1>;
 			};
 
-			swport2: port@2 {
+			swport2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&swphy2>;
 			};
 
-			swport3: port@3 {
+			swport3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 				phy-handle = <&swphy3>;
 			};
 
-			swport4: port@4 {
+			swport4: ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&swphy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp0_eth1>;
@@ -355,19 +353,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swphy1: swphy1@17 {
+			swphy1: ethernet-phy@17 {
 				reg = <17>;
 			};
 
-			swphy2: swphy2@18 {
+			swphy2: ethernet-phy@18 {
 				reg = <18>;
 			};
 
-			swphy3: swphy3@19 {
+			swphy3: ethernet-phy@19 {
 				reg = <19>;
 			};
 
-			swphy4: swphy4@20 {
+			swphy4: ethernet-phy@20 {
 				reg = <20>;
 			};
 		};
diff --git a/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts
index 4125202..67892f0 100644
--- a/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts
@@ -497,42 +497,42 @@
 		reset-deassert-us = <10000>;
 	};
 
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_switch_reset_pins>;
 		reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
@@ -545,19 +545,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/src/arm64/marvell/armada-ap80x.dtsi b/src/arm64/marvell/armada-ap80x.dtsi
index 2c920e2..7ec7c78 100644
--- a/src/arm64/marvell/armada-ap80x.dtsi
+++ b/src/arm64/marvell/armada-ap80x.dtsi
@@ -138,7 +138,6 @@
 
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,
diff --git a/src/arm64/marvell/cn9130-crb.dtsi b/src/arm64/marvell/cn9130-crb.dtsi
index 47d45ff..6fcc34f 100644
--- a/src/arm64/marvell/cn9130-crb.dtsi
+++ b/src/arm64/marvell/cn9130-crb.dtsi
@@ -207,11 +207,9 @@
 		reg = <0>;
 	};
 
-	switch6: switch0@6 {
+	switch6: ethernet-switch@6 {
 		/* Actual device is MV88E6393X */
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <6>;
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
@@ -220,59 +218,59 @@
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "p1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "p2";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "p3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "p4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "p5";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "p6";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "p7";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "p8";
 				phy-handle = <&switch0phy8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				reg = <9>;
 				label = "p9";
 				phy-mode = "10gbase-r";
@@ -280,7 +278,7 @@
 				managed = "in-band-status";
 			};
 
-			port@a {
+			ethernet-port@a {
 				reg = <10>;
 				ethernet = <&cp0_eth0>;
 				phy-mode = "10gbase-r";
@@ -293,35 +291,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git a/src/arm64/marvell/cn9130-db-comexpress.dtsi b/src/arm64/marvell/cn9130-db-comexpress.dtsi
new file mode 100644
index 0000000..028496e
--- /dev/null
+++ b/src/arm64/marvell/cn9130-db-comexpress.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB Com Express CPU module board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9130-cpu-module", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
diff --git a/src/arm64/marvell/cn9131-db-comexpress.dtsi b/src/arm64/marvell/cn9131-db-comexpress.dtsi
new file mode 100644
index 0000000..6f3914b
--- /dev/null
+++ b/src/arm64/marvell/cn9131-db-comexpress.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB Com Express CPU module board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp1_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp1_usb3_0_phy0>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy3 1>;
+	phy-names = "usb";
+};
diff --git a/src/arm64/mediatek/mt6358.dtsi b/src/arm64/mediatek/mt6358.dtsi
index b605313..a1b9601 100644
--- a/src/arm64/mediatek/mt6358.dtsi
+++ b/src/arm64/mediatek/mt6358.dtsi
@@ -8,8 +8,6 @@
 	pmic: pmic {
 		compatible = "mediatek,mt6358";
 		interrupt-controller;
-		interrupt-parent = <&pio>;
-		interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 
 		mt6358codec: mt6358codec {
@@ -128,7 +126,6 @@
 			};
 
 			mt6358_vrf12_reg: ldo_vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -136,7 +133,6 @@
 			};
 
 			mt6358_vio18_reg: ldo_vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -153,7 +149,6 @@
 			};
 
 			mt6358_vcamio_reg: ldo_vcamio {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -168,7 +163,6 @@
 			};
 
 			mt6358_vcn18_reg: ldo_vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -176,7 +170,6 @@
 			};
 
 			mt6358_vfe28_reg: ldo_vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -193,7 +186,6 @@
 			};
 
 			mt6358_vcn28_reg: ldo_vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -218,7 +210,6 @@
 			};
 
 			mt6358_vxo22_reg: ldo_vxo22 {
-				compatible = "regulator-fixed";
 				regulator-name = "vxo22";
 				regulator-min-microvolt = <2200000>;
 				regulator-max-microvolt = <2200000>;
@@ -234,7 +225,6 @@
 			};
 
 			mt6358_vaux18_reg: ldo_vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -249,7 +239,6 @@
 			};
 
 			mt6358_vbif28_reg: ldo_vbif28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vbif28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -280,7 +269,6 @@
 			};
 
 			mt6358_vio28_reg: ldo_vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -288,7 +276,6 @@
 			};
 
 			mt6358_va12_reg: ldo_va12 {
-				compatible = "regulator-fixed";
 				regulator-name = "va12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -297,27 +284,19 @@
 			};
 
 			mt6358_vrf18_reg: ldo_vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <120>;
 			};
 
-			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
-				regulator-name = "vcn33_bt";
+			mt6358_vcn33_reg: ldo_vcn33 {
+				regulator-name = "vcn33";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3500000>;
 				regulator-enable-ramp-delay = <270>;
 			};
 
-			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
-				regulator-name = "vcn33_wifi";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-enable-ramp-delay = <270>;
-			};
-
 			mt6358_vcama2_reg: ldo_vcama2 {
 				regulator-name = "vcama2";
 				regulator-min-microvolt = <1800000>;
@@ -340,7 +319,6 @@
 			};
 
 			mt6358_vaud28_reg: ldo_vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
diff --git a/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts b/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
index c466821..a1f4204 100644
--- a/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -153,8 +153,7 @@
 			reg = <0>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			interrupt-parent = <&pio>;
-			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
 			reset-gpios = <&pio 54 0>;
 
 			ports {
diff --git a/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts b/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts
index b876e50..d06d4af 100644
--- a/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -205,8 +205,7 @@
 		reg = <31>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/src/arm64/mediatek/mt8173-elm-hana.dtsi b/src/arm64/mediatek/mt8173-elm-hana.dtsi
index bdcd35c..90cbbc1 100644
--- a/src/arm64/mediatek/mt8173-elm-hana.dtsi
+++ b/src/arm64/mediatek/mt8173-elm-hana.dtsi
@@ -13,8 +13,7 @@
 	touchscreen2: touchscreen@34 {
 		compatible = "melfas,mip4_ts";
 		reg = <0x34>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/*
@@ -26,8 +25,7 @@
 		compatible = "hid-over-i2c";
 		reg = <0x20>;
 		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -39,8 +37,7 @@
 	 */
 	trackpad2: trackpad@2c {
 		compatible = "hid-over-i2c";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x2c>;
 		hid-descr-addr = <0x0020>;
 		wakeup-source;
diff --git a/src/arm64/mediatek/mt8173-elm.dtsi b/src/arm64/mediatek/mt8173-elm.dtsi
index 1114956..8d614ac 100644
--- a/src/arm64/mediatek/mt8173-elm.dtsi
+++ b/src/arm64/mediatek/mt8173-elm.dtsi
@@ -245,8 +245,7 @@
 		reg = <0x1a>;
 		avdd-supply = <&mt6397_vgp1_reg>;
 		cpvdd-supply = <&mt6397_vcama_reg>;
-		interrupt-parent = <&pio>;
-		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_BOTH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rt5650_irq>;
 		#sound-dai-cells = <1>;
@@ -308,8 +307,7 @@
 	da9211: da9211@68 {
 		compatible = "dlg,da9211";
 		reg = <0x68>;
-		interrupt-parent = <&pio>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 
 		regulators {
 			da9211_vcpu_reg: BUCKA {
@@ -353,8 +351,7 @@
 	touchscreen: touchscreen@10 {
 		compatible = "elan,ekth3500";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -366,8 +363,7 @@
 
 	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x15>;
 		vcc-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
@@ -439,8 +435,7 @@
 	btmrvl: btmrvl@2 {
 		compatible = "marvell,sd8897-bt";
 		reg = <2>;
-		interrupt-parent = <&pio>;
-		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 119 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = /bits/ 16 <0x0d>;
 		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
 	};
@@ -448,8 +443,7 @@
 	mwifiex: mwifiex@1 {
 		compatible = "marvell,sd8897";
 		reg = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 38 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = <3>;
 	};
 };
@@ -933,8 +927,7 @@
 		compatible = "mediatek,mt6397";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
@@ -1160,8 +1153,7 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0x0>;
 		spi-max-frequency = <12000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>;
 		google,cros-ec-spi-msg-delay = <500>;
 
 		i2c_tunnel: i2c-tunnel0 {
diff --git a/src/arm64/mediatek/mt8173-evb.dts b/src/arm64/mediatek/mt8173-evb.dts
index d258c80..0e5c628 100644
--- a/src/arm64/mediatek/mt8173-evb.dts
+++ b/src/arm64/mediatek/mt8173-evb.dts
@@ -303,8 +303,7 @@
 
 	pmic: pmic {
 		compatible = "mediatek,mt6397";
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
diff --git a/src/arm64/mediatek/mt8173.dtsi b/src/arm64/mediatek/mt8173.dtsi
index c47d7d9..cac4cd0 100644
--- a/src/arm64/mediatek/mt8173.dtsi
+++ b/src/arm64/mediatek/mt8173.dtsi
@@ -1368,10 +1368,9 @@
 			#clock-cells = <1>;
 		};
 
-		vcodec_dec: vcodec@16000000 {
+		vcodec_dec: vcodec@16020000 {
 			compatible = "mediatek,mt8173-vcodec-dec";
-			reg = <0 0x16000000 0 0x100>,	/* VDEC_SYS */
-			      <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
+			reg = <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
 			      <0 0x16021000 0 0x800>,	/* VDEC_LD */
 			      <0 0x16021800 0 0x800>,	/* VDEC_TOP */
 			      <0 0x16022000 0 0x1000>,	/* VDEC_CM */
@@ -1382,6 +1381,8 @@
 			      <0 0x16027000 0 0x800>,	/* VDEC_HWQ */
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
@@ -1392,6 +1393,7 @@
 				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
 			mediatek,vpu = <&vpu>;
+			mediatek,vdecsys = <&vdecsys>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
 			clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
 				 <&topckgen CLK_TOP_UNIVPLL_D2>,
diff --git a/src/arm64/mediatek/mt8183-evb.dts b/src/arm64/mediatek/mt8183-evb.dts
index 77f9ab9..681dedd 100644
--- a/src/arm64/mediatek/mt8183-evb.dts
+++ b/src/arm64/mediatek/mt8183-evb.dts
@@ -381,6 +381,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git a/src/arm64/mediatek/mt8183-kukui-audio-da7219.dtsi b/src/arm64/mediatek/mt8183-kukui-audio-da7219.dtsi
index 2c69e76..8b57706 100644
--- a/src/arm64/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&da7219_pins>;
 		compatible = "dlg,da7219";
 		reg = <0x1a>;
-		interrupt-parent = <&pio>;
-		interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+		interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>;
 
 		dlg,micbias-lvl = <2600>;
 		dlg,mic-amp-in-sel = "diff";
diff --git a/src/arm64/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/src/arm64/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
index 0799c48..548e22c 100644
--- a/src/arm64/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&ts3a227e_pins>;
 		compatible = "ti,ts3a227e";
 		reg = <0x3b>;
-		interrupt-parent = <&pio>;
-		interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 	};
 };
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi-damu.dts b/src/arm64/mediatek/mt8183-kukui-jacuzzi-damu.dts
index 552bfc7..0b45aee 100644
--- a/src/arm64/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -18,8 +18,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
index 77b96dd..b595622 100644
--- a/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -30,8 +30,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
index 37e6e58..5a1c393 100644
--- a/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -17,8 +17,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
index 0e09604..3ea4fdb 100644
--- a/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -17,8 +17,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts b/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
new file mode 100644
index 0000000..4eb2a0d
--- /dev/null
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku0 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku0", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts b/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
new file mode 100644
index 0000000..6a73336
--- /dev/null
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku1 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku1", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico.dts b/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico.dts
new file mode 100644
index 0000000..8ce9568
--- /dev/null
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts
new file mode 100644
index 0000000..a2e74b8
--- /dev/null
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico6 board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183";
+
+	bt_wakeup: bt-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_wakeup>;
+
+		wobt {
+			label = "Wake on BT";
+			gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&wifi_wakeup {
+	wowlan {
+		gpios = <&pio 113 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&wifi_pwrseq {
+	post-power-on-delay-ms = <50>;
+
+	/* Toggle WIFI_ENABLE to reset the chip. */
+	reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+};
+
+&wifi_pins_pwrseq {
+	pins-wifi-enable {
+		pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+	};
+};
+
+&mmc1_pins_default {
+	pins-cmd-dat {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1 {
+	bt_reset: bt-reset {
+		compatible = "mediatek,mt7921s-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pio {
+	bt_pins_wakeup: bt-pins-wakeup {
+		piins-bt-wakeup {
+			pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
+			input-enable;
+		};
+	};
+
+	bt_pins_reset: bt-pins-reset {
+		pins-bt-reset {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-high;
+		};
+	};
+};
+
+/delete-node/ &bluetooth;
+/delete-node/ &bt_pins;
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi b/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi
index 8202603..7592e3b 100644
--- a/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -149,7 +149,6 @@
 		reg = <0x58>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&anx7625_pins>;
-		panel_flags = <1>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
 		vdd10-supply = <&pp1200_mipibrdg>;
diff --git a/src/arm64/mediatek/mt8183-kukui-kakadu-sku22.dts b/src/arm64/mediatek/mt8183-kukui-kakadu-sku22.dts
index fcce8ea..1ecf394 100644
--- a/src/arm64/mediatek/mt8183-kukui-kakadu-sku22.dts
+++ b/src/arm64/mediatek/mt8183-kukui-kakadu-sku22.dts
@@ -14,6 +14,24 @@
 		     "google,kakadu", "mediatek,mt8183";
 };
 
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
+
 &sound {
 	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
 };
diff --git a/src/arm64/mediatek/mt8183-kukui-kakadu.dts b/src/arm64/mediatek/mt8183-kukui-kakadu.dts
index ebfabba..ba74109 100644
--- a/src/arm64/mediatek/mt8183-kukui-kakadu.dts
+++ b/src/arm64/mediatek/mt8183-kukui-kakadu.dts
@@ -13,3 +13,21 @@
 	compatible = "google,kakadu-rev3", "google,kakadu-rev2",
 			"google,kakadu", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
diff --git a/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi b/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi
index a11adeb2..b6a9830 100644
--- a/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi
@@ -63,19 +63,6 @@
 
 &i2c0 {
 	status = "okay";
-
-	touchscreen: touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&open_touch>;
-
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
-
-		post-power-on-delay-ms = <10>;
-		hid-descr-addr = <0x0001>;
-	};
 };
 
 &mt6358_vcama2_reg {
@@ -384,5 +371,5 @@
 
 &panel {
 	status = "okay";
-	compatible = "boe,tv105wum-nw0";
+	/* compatible will be set in board dts */
 };
diff --git a/src/arm64/mediatek/mt8183-kukui-katsu-sku32.dts b/src/arm64/mediatek/mt8183-kukui-katsu-sku32.dts
new file mode 100644
index 0000000..0536100
--- /dev/null
+++ b/src/arm64/mediatek/mt8183-kukui-katsu-sku32.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&lcd_pp3300>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
diff --git a/src/arm64/mediatek/mt8183-kukui-katsu-sku38.dts b/src/arm64/mediatek/mt8183-kukui-katsu-sku38.dts
new file mode 100644
index 0000000..cf008ed
--- /dev/null
+++ b/src/arm64/mediatek/mt8183-kukui-katsu-sku38.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu sku38 board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&lcd_pp3300>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
diff --git a/src/arm64/mediatek/mt8183-kukui-kodama.dtsi b/src/arm64/mediatek/mt8183-kukui-kodama.dtsi
index 4864c39..306c951 100644
--- a/src/arm64/mediatek/mt8183-kukui-kodama.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui-kodama.dtsi
@@ -48,8 +48,7 @@
 	touchscreen: touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touch_default>;
 
diff --git a/src/arm64/mediatek/mt8183-kukui-krane.dtsi b/src/arm64/mediatek/mt8183-kukui-krane.dtsi
index d5f41c6..382e4c6 100644
--- a/src/arm64/mediatek/mt8183-kukui-krane.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui-krane.dtsi
@@ -54,8 +54,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&open_touch>;
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
 
 		post-power-on-delay-ms = <10>;
 		hid-descr-addr = <0x0001>;
diff --git a/src/arm64/mediatek/mt8183-kukui.dtsi b/src/arm64/mediatek/mt8183-kukui.dtsi
index 7881a27..1b3396b 100644
--- a/src/arm64/mediatek/mt8183-kukui.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui.dtsi
@@ -846,6 +846,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -884,14 +888,13 @@
 	status = "okay";
 	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&h1_int_od_l>;
-		interrupt-parent = <&pio>;
-		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
@@ -918,8 +921,7 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0>;
 		spi-max-frequency = <3000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_odl>;
 
diff --git a/src/arm64/mediatek/mt8183-pumpkin.dts b/src/arm64/mediatek/mt8183-pumpkin.dts
index b5784a6..76449b4 100644
--- a/src/arm64/mediatek/mt8183-pumpkin.dts
+++ b/src/arm64/mediatek/mt8183-pumpkin.dts
@@ -370,6 +370,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git a/src/arm64/mediatek/mt8183.dtsi b/src/arm64/mediatek/mt8183.dtsi
index 976dc96..920ee41 100644
--- a/src/arm64/mediatek/mt8183.dtsi
+++ b/src/arm64/mediatek/mt8183.dtsi
@@ -1183,22 +1183,10 @@
 			status = "disabled";
 		};
 
-		svs: svs@1100b000 {
-			compatible = "mediatek,mt8183-svs";
-			reg = <0 0x1100b000 0 0x1000>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&infracfg CLK_INFRA_THERM>;
-			clock-names = "main";
-			nvmem-cells = <&svs_calibration>,
-				      <&thermal_calibration>;
-			nvmem-cell-names = "svs-calibration-data",
-					   "t-calibration-data";
-		};
-
 		thermal: thermal@1100b000 {
 			#thermal-sensor-cells = <1>;
 			compatible = "mediatek,mt8183-thermal";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			clocks = <&infracfg CLK_INFRA_THERM>,
 				 <&infracfg CLK_INFRA_AUXADC>;
 			clock-names = "therm", "auxadc";
@@ -1210,6 +1198,18 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1660,7 +1660,7 @@
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 		};
 
-		mdp3-rdma0@14001000 {
+		dma-controller0@14001000 {
 			compatible = "mediatek,mt8183-mdp3-rdma";
 			reg = <0 0x14001000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
@@ -1672,6 +1672,7 @@
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
 			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
 				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-rsz0@14003000 {
@@ -1692,7 +1693,7 @@
 			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
 		};
 
-		mdp3-wrot0@14005000 {
+		dma-controller@14005000 {
 			compatible = "mediatek,mt8183-mdp3-wrot";
 			reg = <0 0x14005000 0 0x1000>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
@@ -1701,6 +1702,7 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			#dma-cells = <1>;
 		};
 
 		mdp3-wdma@14006000 {
@@ -1898,6 +1900,36 @@
 			#clock-cells = <1>;
 		};
 
+		vcodec_dec: video-codec@16020000 {
+			compatible = "mediatek,mt8183-vcodec-dec";
+			reg = <0 0x16020000 0 0x1000>,		/* VDEC_MISC */
+			      <0 0x16021000 0 0x800>,		/* VDEC_VLD */
+			      <0 0x16021800 0 0x800>,		/* VDEC_TOP */
+			      <0 0x16022000 0 0x1000>,		/* VDEC_MC */
+			      <0 0x16023000 0 0x1000>,		/* VDEC_AVCVLD */
+			      <0 0x16024000 0 0x1000>,		/* VDEC_AVCMV */
+			      <0 0x16025000 0 0x1000>,		/* VDEC_PP */
+			      <0 0x16026800 0 0x800>,		/* VP8_VD */
+			      <0 0x16027000 0 0x800>,		/* VP6_VD */
+			      <0 0x16027800 0 0x800>,		/* VP8_VL */
+			      <0 0x16028400 0 0x400>;		/* VP9_VD */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PPWRAP_EXT>;
+			mediatek,scp = <&scp>;
+			mediatek,vdecsys = <&vdecsys>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_VDEC>;
+			clock-names = "vdec";
+		};
+
 		larb1: larb@16010000 {
 			compatible = "mediatek,mt8183-smi-larb";
 			reg = <0 0x16010000 0 0x1000>;
diff --git a/src/arm64/mediatek/mt8186.dtsi b/src/arm64/mediatek/mt8186.dtsi
index df0c04f..2fec6fd 100644
--- a/src/arm64/mediatek/mt8186.dtsi
+++ b/src/arm64/mediatek/mt8186.dtsi
@@ -22,7 +22,7 @@
 
 	aliases {
 		ovl0 = &ovl0;
-		ovl_2l0 = &ovl_2l0;
+		ovl-2l0 = &ovl_2l0;
 		rdma0 = &rdma0;
 		rdma1 = &rdma1;
 	};
@@ -1160,14 +1160,14 @@
 			status = "disabled";
 		};
 
-		adsp_mailbox0: mailbox@10686000 {
+		adsp_mailbox0: mailbox@10686100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10686100 0 0x1000>;
 			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
-		adsp_mailbox1: mailbox@10687000 {
+		adsp_mailbox1: mailbox@10687100 {
 			compatible = "mediatek,mt8186-adsp-mbox";
 			#mbox-cells = <0>;
 			reg = <0 0x10687100 0 0x1000>;
diff --git a/src/arm64/mediatek/mt8188-evb.dts b/src/arm64/mediatek/mt8188-evb.dts
new file mode 100644
index 0000000..68a82b4
--- /dev/null
+++ b/src/arm64/mediatek/mt8188-evb.dts
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	model = "MediaTek MT8188 evaluation board";
+	compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <8>;
+	hs400-ds-delay = <0x1481b>;
+	max-frequency = <200000000>;
+
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	non-removable;
+
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+
+	status = "okay";
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&pio {
+	adsp_uart_pins: adsp-uart-pins {
+		pins-tx-rx {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk-ds {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
+				 <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-pins {
+		pins-io-ck {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins-io-cs {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
+				 <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
+				 <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
+			bias-pull-up;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx-tx {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
diff --git a/src/arm64/mediatek/mt8188.dtsi b/src/arm64/mediatek/mt8188.dtsi
new file mode 100644
index 0000000..b4315c9
--- /dev/null
+++ b/src/arm64/mediatek/mt8188.dtsi
@@ -0,0 +1,956 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mediatek,mt8188-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+
+/ {
+	compatible = "mediatek,mt8188";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <95>;
+				min-residency-us = <580>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <45>;
+				exit-latency-us = <140>;
+				min-residency-us = <740>;
+			};
+
+			cluster_off_l: cluster-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <155>;
+				min-residency-us = <840>;
+			};
+
+			cluster_off_b: cluster-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+	};
+
+	clk13m: oscillator-13m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <13000000>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clock-frequency = <13000000>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8188-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8188-infracfg-ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8188-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8188-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11e10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
+				    "iocfg_lm", "iocfg_rt", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 176>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8188-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			mediatek,disable-extrst;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8188-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10024000 {
+			compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon";
+			reg = <0 0x10024000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8188-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_audio26m: clock-controller@10b91100 {
+			compatible = "mediatek,mt8188-adsp-audio26m";
+			reg = <0 0x10b91100 0 0x100>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001100 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11001200 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001200 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11001300 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001300 0 0x100>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11001400 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001400 0 0x100>;
+			interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		auxadc: adc@11002000 {
+			compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pericfg_ao: syscon@11003000 {
+			compatible = "mediatek,mt8188-pericfg-ao", "syscon";
+			reg = <0 0x11003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		xhci1: usb@11200000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>,
+			       <&u3port1 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
+			clock-names = "source", "hclk", "source_cg", "crypto_clk";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11eb0000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11280000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11280000 0 0x1000>,
+			      <0 0x10220080 0 0x80>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11281000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11281000 0 0x1000>,
+			      <0 0x10220180 0 0x80>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11282000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11282000 0 0x1000>,
+			      <0 0x10220280 0 0x80>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_c: clock-controller@11283000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-c";
+			reg = <0 0x11283000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>,
+					  <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			status = "disabled";
+		};
+
+		xhci0: usb@112b0000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>,
+					  <&topckgen CLK_TOP_USB_TOP_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x460 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		nor_flash: spi@1132c000 {
+			compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
+			reg = <0 0x1132c000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11e00000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10220100 0 0x80>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11e01000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e01000 0 0x1000>,
+			      <0 0x10220380 0 0x80>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e02000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-w";
+			reg = <0 0x11e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy0: t-phy@11e30000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e30000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11e40000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e40000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		u3phy2: t-phy@11e80000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e80000 0x1000>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		i2c5: i2c@11ec0000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec0000 0 0x1000>,
+			      <0 0x10220480 0 0x80>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11ec1000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec1000 0 0x1000>,
+			      <0 0x10220600 0 0x80>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_en: clock-controller@11ec2000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-en";
+			reg = <0 0x11ec2000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8188-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys0: clock-controller@14000000 {
+			compatible = "mediatek,mt8188-vppsys0";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys: clock-controller@14e00000 {
+			compatible = "mediatek,mt8188-wpesys";
+			reg = <0 0x14e00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp0: clock-controller@14e02000 {
+			compatible = "mediatek,mt8188-wpesys-vpp0";
+			reg = <0 0x14e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys1: clock-controller@14f00000 {
+			compatible = "mediatek,mt8188-vppsys1";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8188-imgsys";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_top: clock-controller@15110000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-top";
+			reg = <0 0x15110000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_nr: clock-controller@15130000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-nr";
+			reg = <0 0x15130000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe1: clock-controller@15220000 {
+			compatible = "mediatek,mt8188-imgsys-wpe1";
+			reg = <0 0x15220000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@15330000 {
+			compatible = "mediatek,mt8188-ipesys";
+			reg = <0 0x15330000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe2: clock-controller@15520000 {
+			compatible = "mediatek,mt8188-imgsys-wpe2";
+			reg = <0 0x15520000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe3: clock-controller@15620000 {
+			compatible = "mediatek,mt8188-imgsys-wpe3";
+			reg = <0 0x15620000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8188-camsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawa: clock-controller@1604f000 {
+			compatible = "mediatek,mt8188-camsys-rawa";
+			reg = <0 0x1604f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuva: clock-controller@1606f000 {
+			compatible = "mediatek,mt8188-camsys-yuva";
+			reg = <0 0x1606f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1608f000 {
+			compatible = "mediatek,mt8188-camsys-rawb";
+			reg = <0 0x1608f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuvb: clock-controller@160af000 {
+			compatible = "mediatek,mt8188-camsys-yuvb";
+			reg = <0 0x160af000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ccusys: clock-controller@17200000 {
+			compatible = "mediatek,mt8188-ccusys";
+			reg = <0 0x17200000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys_soc: clock-controller@1800f000 {
+			compatible = "mediatek,mt8188-vdecsys-soc";
+			reg = <0 0x1800f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: clock-controller@1802f000 {
+			compatible = "mediatek,mt8188-vdecsys";
+			reg = <0 0x1802f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8188-vencsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/src/arm64/mediatek/mt8192-asurada.dtsi b/src/arm64/mediatek/mt8192-asurada.dtsi
index f228125..d87aab8 100644
--- a/src/arm64/mediatek/mt8192-asurada.dtsi
+++ b/src/arm64/mediatek/mt8192-asurada.dtsi
@@ -1402,7 +1402,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi5_pins>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
diff --git a/src/arm64/mediatek/mt8192.dtsi b/src/arm64/mediatek/mt8192.dtsi
index 69f4cde..6dd32db 100644
--- a/src/arm64/mediatek/mt8192.dtsi
+++ b/src/arm64/mediatek/mt8192.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8192-power.h>
 #include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8192";
@@ -72,6 +74,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@100 {
@@ -90,6 +93,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@200 {
@@ -108,6 +112,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@300 {
@@ -126,6 +131,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@400 {
@@ -144,6 +150,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@500 {
@@ -162,6 +169,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@600 {
@@ -180,6 +188,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@700 {
@@ -198,6 +207,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu-map {
@@ -788,6 +798,29 @@
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8192-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8192-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>, <&lvts_e_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1114,6 +1147,17 @@
 			status = "disabled";
 		};
 
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8192-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
 		efuse: efuse@11c10000 {
 			compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
 			reg = <0 0x11c10000 0 0x1000>;
@@ -1899,4 +1943,426 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+			trips {
+				cam_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+			trips {
+				md0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+			trips {
+				md2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/src/arm64/mediatek/mt8195-cherry.dtsi b/src/arm64/mediatek/mt8195-cherry.dtsi
index 5a7cab4..3c6079e 100644
--- a/src/arm64/mediatek/mt8195-cherry.dtsi
+++ b/src/arm64/mediatek/mt8195-cherry.dtsi
@@ -127,6 +127,77 @@
 		regulator-boot-on;
 	};
 
+	/* Murata NCP03WF104F05RL */
+	tboard_thermistor1: thermal-sensor-t1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor-t2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
 	usb_vbus: regulator-5v0-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -189,6 +260,10 @@
 	memory-region = <&afe_mem>;
 };
 
+&auxadc {
+	status = "okay";
+};
+
 &dp_intf0 {
 	status = "okay";
 
@@ -401,6 +476,14 @@
 	};
 };
 
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
 &mmc0 {
 	status = "okay";
 
@@ -471,7 +554,6 @@
 
 /* for GPU SRAM */
 &mt6359_vsram_others_ldo_reg {
-	regulator-always-on;
 	regulator-min-microvolt = <750000>;
 	regulator-max-microvolt = <750000>;
 };
@@ -1154,7 +1236,36 @@
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
 				regulator-allowed-modes = <0 1 2>;
-				regulator-always-on;
+			};
+		};
+	};
+};
+
+&thermal_zones {
+	soc-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&tboard_thermistor1>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pmic-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&tboard_thermistor2>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
 			};
 		};
 	};
@@ -1183,6 +1294,7 @@
 &xhci0 {
 	status = "okay";
 
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
@@ -1190,6 +1302,7 @@
 &xhci1 {
 	status = "okay";
 
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
diff --git a/src/arm64/mediatek/mt8195-demo.dts b/src/arm64/mediatek/mt8195-demo.dts
index 69c7f39..4127cb8 100644
--- a/src/arm64/mediatek/mt8195-demo.dts
+++ b/src/arm64/mediatek/mt8195-demo.dts
@@ -128,6 +128,7 @@
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 
diff --git a/src/arm64/mediatek/mt8195.dtsi b/src/arm64/mediatek/mt8195.dtsi
index e0ac2e9..b910166 100644
--- a/src/arm64/mediatek/mt8195.dtsi
+++ b/src/arm64/mediatek/mt8195.dtsi
@@ -538,7 +538,7 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8195_POWER_DOMAIN_MFG1 {
 						reg = <MT8195_POWER_DOMAIN_MFG1>;
 						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
 							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
@@ -1119,7 +1119,7 @@
 
 		lvts_ap: thermal-sensor@1100b000 {
 			compatible = "mediatek,mt8195-lvts-ap";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
 			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
@@ -1128,6 +1128,18 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8195-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calib_data &lvts_efuse_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg_ao MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		disp_pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1686,6 +1698,9 @@
 			lvts_efuse_data2: lvts2-calib@1d0 {
 				reg = <0x1d0 0x38>;
 			};
+			svs_calib_data: svs-calib@580 {
+				reg = <0x580 0x64>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1718,6 +1733,26 @@
 			};
 		};
 
+		mipi_tx0: dsi-phy@11c80000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@11c90000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c5: i2c@11d00000 {
 			compatible = "mediatek,mt8195-i2c",
 				     "mediatek,mt8192-i2c";
@@ -1965,6 +2000,115 @@
 			#clock-cells = <1>;
 		};
 
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce1 12 CMDQ_THR_PRIO_1>,
+				 <&gce1 13 CMDQ_THR_PRIO_1>,
+				 <&gce1 14 CMDQ_THR_PRIO_1>,
+				 <&gce1 21 CMDQ_THR_PRIO_1>,
+				 <&gce1 22 CMDQ_THR_PRIO_1>;
+			#dma-cells = <1>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+		};
+
+		display@14003000 {
+			compatible = "mediatek,mt8195-mdp3-stitch";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_STITCH>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+		};
+
+		dma-controller@1400c000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			#dma-cells = <1>;
+		};
+
 		mutex@1400f000 {
 			compatible = "mediatek,mt8195-vpp-mutex";
 			reg = <0 0x1400f000 0 0x1000>;
@@ -2112,6 +2256,289 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
 		};
 
+		display@14f06000 {
+			compatible = "mediatek,mt8195-mdp3-split";
+			reg = <0 0x14f06000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x6000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_VPP_SPLIT>,
+				 <&vppsys1 CLK_VPP1_HDMI_META>,
+				 <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f07000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x14f07000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TCC>;
+		};
+
+		dma-controller@14f08000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f08000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x8000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		display@14f0b000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_FG>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+		};
+
+		display@14f0e000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0e000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_HDR>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+		};
+
+		display@14f11000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f11000 0 0x1000>;
+			interrupts = <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f14000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f14000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+		};
+
+		display@14f17000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f17000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TDSHP>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1c000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1c000 0 0x1000>;
+			interrupts = <GIC_SPI 628 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1f000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14f1f000 0 0x1000>;
+			interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_OVL>;
+		};
+
+		display@14f20000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f20000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		dma-controller@14f23000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f23000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f24000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f25000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
 		imgsys: clock-controller@15000000 {
 			compatible = "mediatek,mt8195-imgsys";
 			reg = <0 0x15000000 0 0x1000>;
@@ -2741,6 +3168,20 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
 		};
 
+		dsi0: dsi@1c008000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		dsc0: dsc@1c009000 {
 			compatible = "mediatek,mt8195-disp-dsc";
 			reg = <0 0x1c009000 0 0x1000>;
@@ -2750,6 +3191,20 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
 		};
 
+		dsi1: dsi@1c012000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		merge0: merge@1c014000 {
 			compatible = "mediatek,mt8195-disp-merge";
 			reg = <0 0x1c014000 0 0x1000>;
@@ -2873,7 +3328,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 		};
 
-		vdo1_rdma0: rdma@1c104000 {
+		vdo1_rdma0: dma-controller@1c104000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c104000 0 0x1000>;
 			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2881,9 +3336,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma1: rdma@1c105000 {
+		vdo1_rdma1: dma-controller@1c105000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c105000 0 0x1000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2891,9 +3347,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma2: rdma@1c106000 {
+		vdo1_rdma2: dma-controller@1c106000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c106000 0 0x1000>;
 			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2901,9 +3358,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma3: rdma@1c107000 {
+		vdo1_rdma3: dma-controller@1c107000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c107000 0 0x1000>;
 			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2911,9 +3369,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma4: rdma@1c108000 {
+		vdo1_rdma4: dma-controller@1c108000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c108000 0 0x1000>;
 			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2921,9 +3380,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma5: rdma@1c109000 {
+		vdo1_rdma5: dma-controller@1c109000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c109000 0 0x1000>;
 			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2931,9 +3391,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma6: rdma@1c10a000 {
+		vdo1_rdma6: dma-controller@1c10a000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10a000 0 0x1000>;
 			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2941,9 +3402,10 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+			#dma-cells = <1>;
 		};
 
-		vdo1_rdma7: rdma@1c10b000 {
+		vdo1_rdma7: dma-controller@1c10b000 {
 			compatible = "mediatek,mt8195-vdo1-rdma";
 			reg = <0 0x1c10b000 0 0x1000>;
 			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2951,6 +3413,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+			#dma-cells = <1>;
 		};
 
 		merge1: vpp-merge@1c10c000 {
diff --git a/src/arm64/mediatek/mt8395-genio-1200-evk.dts b/src/arm64/mediatek/mt8395-genio-1200-evk.dts
index 00ac59a..7fc515a 100644
--- a/src/arm64/mediatek/mt8395-genio-1200-evk.dts
+++ b/src/arm64/mediatek/mt8395-genio-1200-evk.dts
@@ -210,8 +210,7 @@
 	touchscreen@5d {
 		compatible = "goodix,gt9271";
 		reg = <0x5d>;
-		interrupt-parent = <&pio>;
-		interrupts = <132 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
 		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
 		AVDD28-supply = <&mt6360_ldo1>;
@@ -774,8 +773,7 @@
 };
 
 &pmic {
-	interrupt-parent = <&pio>;
-	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &scp {
diff --git a/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts b/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
index ea13c4a..81a8293 100644
--- a/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -175,7 +175,7 @@
 			status = "okay";
 
 			phy-handle = <&mgbe0_phy>;
-			phy-mode = "usxgmii";
+			phy-mode = "10gbase-r";
 
 			mdio {
 				#address-cells = <1>;
diff --git a/src/arm64/nvidia/tegra234.dtsi b/src/arm64/nvidia/tegra234.dtsi
index 3f16595..d1bd328 100644
--- a/src/arm64/nvidia/tegra234.dtsi
+++ b/src/arm64/nvidia/tegra234.dtsi
@@ -1459,7 +1459,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
 			status = "disabled";
 		};
 
@@ -1493,7 +1493,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
 			status = "disabled";
 		};
 
@@ -1527,7 +1527,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>;
 			status = "disabled";
 		};
 
diff --git a/src/arm64/qcom/ipq5018-rdp432-c2.dts b/src/arm64/qcom/ipq5018-rdp432-c2.dts
index e636a1c..8460b53 100644
--- a/src/arm64/qcom/ipq5018-rdp432-c2.dts
+++ b/src/arm64/qcom/ipq5018-rdp432-c2.dts
@@ -67,6 +67,18 @@
 	};
 };
 
+&usb {
+	status = "okay";
+};
+
+&usb_dwc {
+	dr_mode = "host";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <24000000>;
 };
diff --git a/src/arm64/qcom/ipq5018.dtsi b/src/arm64/qcom/ipq5018.dtsi
index 38ffdc3..32b178b 100644
--- a/src/arm64/qcom/ipq5018.dtsi
+++ b/src/arm64/qcom/ipq5018.dtsi
@@ -5,6 +5,7 @@
  * Copyright (c) 2023 The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
@@ -36,6 +37,8 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		CPU1: cpu@1 {
@@ -44,6 +47,8 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		L2_0: l2-cache {
@@ -54,6 +59,23 @@
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
@@ -82,6 +104,24 @@
 		#size-cells = <2>;
 		ranges;
 
+		bootloader@4a800000 {
+			reg = <0x0 0x4a800000 0x0 0x200000>;
+			no-map;
+		};
+
+		sbl@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
 		tz_region: tz@4ac00000 {
 			reg = <0x0 0x4ac00000 0x0 0x200000>;
 			no-map;
@@ -94,6 +134,19 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usbphy0: phy@5b000 {
+			compatible = "qcom,ipq5018-usb-hsphy";
+			reg = <0x0005b000 0x120>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -129,6 +182,12 @@
 			#power-domain-cells = <1>;
 		};
 
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x7804000 0x1000>;
@@ -146,6 +205,16 @@
 			status = "disabled";
 		};
 
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1d000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x078af000 0x200>;
@@ -153,9 +222,64 @@
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
+		usb: usb@8af8800 {
+			compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB0_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
@@ -189,6 +313,24 @@
 			clocks = <&sleep_clk>;
 		};
 
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5018-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq5018-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board_clk>;
+			clock-names = "xo";
+		};
+
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0b120000 0x1000>;
diff --git a/src/arm64/qcom/ipq5332-rdp-common.dtsi b/src/arm64/qcom/ipq5332-rdp-common.dtsi
index 4870cdb..b37ae77 100644
--- a/src/arm64/qcom/ipq5332-rdp-common.dtsi
+++ b/src/arm64/qcom/ipq5332-rdp-common.dtsi
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "ipq5332.dtsi"
 
 / {
@@ -39,6 +40,8 @@
 		pinctrl-names = "default";
 
 		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
 			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
diff --git a/src/arm64/qcom/ipq5332-rdp441.dts b/src/arm64/qcom/ipq5332-rdp441.dts
index e89e2e9..8464138 100644
--- a/src/arm64/qcom/ipq5332-rdp441.dts
+++ b/src/arm64/qcom/ipq5332-rdp441.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/src/arm64/qcom/ipq5332-rdp442.dts b/src/arm64/qcom/ipq5332-rdp442.dts
index efd480a..ed8a54e 100644
--- a/src/arm64/qcom/ipq5332-rdp442.dts
+++ b/src/arm64/qcom/ipq5332-rdp442.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/src/arm64/qcom/ipq5332-rdp474.dts b/src/arm64/qcom/ipq5332-rdp474.dts
index eb1fa33..d5f99e7 100644
--- a/src/arm64/qcom/ipq5332-rdp474.dts
+++ b/src/arm64/qcom/ipq5332-rdp474.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/src/arm64/qcom/ipq5332.dtsi b/src/arm64/qcom/ipq5332.dtsi
index d3fef2f..42e2e48 100644
--- a/src/arm64/qcom/ipq5332.dtsi
+++ b/src/arm64/qcom/ipq5332.dtsi
@@ -91,13 +91,21 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
-		opp-1488000000 {
-			opp-hz = /bits/ 64 <1488000000>;
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+		};
 	};
 
 	pmu {
@@ -163,6 +171,11 @@
 			reg = <0x000a4000 0x721>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@1d {
+				reg = <0x1d 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -390,8 +403,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo_board>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
diff --git a/src/arm64/qcom/ipq6018.dtsi b/src/arm64/qcom/ipq6018.dtsi
index e59b9df..61c8fd4 100644
--- a/src/arm64/qcom/ipq6018.dtsi
+++ b/src/arm64/qcom/ipq6018.dtsi
@@ -96,42 +96,49 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&cpu_speed_bin>;
 		opp-shared;
 
 		opp-864000000 {
 			opp-hz = /bits/ 64 <864000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -236,31 +243,26 @@
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x00078000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x00078000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "gcc_usb0_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
-				      <0x0 0x00078400 0x0 0x200>, /* Rx */
-				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
-				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: qusb@79000 {
@@ -314,6 +316,11 @@
 			reg = <0x0 0x000a4000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@135 {
+				reg = <0x135 0x1>;
+				bits = <7 1>;
+			};
 		};
 
 		prng: qrng@e3000 {
@@ -439,6 +446,26 @@
 			qcom,ee = <0>;
 		};
 
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78af000 0x0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b0000 0x0 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart3: serial@78b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x0 0x078b1000 0x0 0x200>;
@@ -449,6 +476,36 @@
 			status = "disabled";
 		};
 
+		blsp1_uart4: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b2000 0x0 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b3000 0x0 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b4000 0x0 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -477,6 +534,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b9000 0x0 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -557,7 +628,7 @@
 					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
 					       <133330000>,
-					       <20000000>;
+					       <24000000>;
 
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
@@ -566,7 +637,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x0 0x08a00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				clocks = <&xo>;
 				clock-names = "ref";
@@ -611,8 +682,8 @@
 			compatible = "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0 0x0b111000 0x0 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
@@ -731,7 +802,7 @@
 			};
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq6018";
 			reg = <0x0 0x20000000 0x0 0xf1d>,
 			      <0x0 0x20000f20 0x0 0xa8>,
@@ -759,10 +830,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/src/arm64/qcom/ipq8074.dtsi b/src/arm64/qcom/ipq8074.dtsi
index 2f275c8..2644144 100644
--- a/src/arm64/qcom/ipq8074.dtsi
+++ b/src/arm64/qcom/ipq8074.dtsi
@@ -125,32 +125,26 @@
 
 		ssphy_1: phy@58000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00058000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00058000 0x1000>;
 
 			clocks = <&gcc GCC_USB1_AUX_CLK>,
-				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB1_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_1_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB1_PHY_BCR>,
-				<&gcc GCC_USB3PHY_1_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@58200 {
-				reg = <0x00058200 0x130>,     /* Tx */
-				      <0x00058400 0x200>,     /* Rx */
-				      <0x00058800 0x1f8>,     /* PCS */
-				      <0x00058600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB1_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_1_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_1: phy@59000 {
@@ -168,32 +162,26 @@
 
 		ssphy_0: phy@78000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00078000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00078000 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_0_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
-				<&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x00078200 0x130>,     /* Tx */
-				      <0x00078400 0x200>,     /* Rx */
-				      <0x00078800 0x1f8>,     /* PCS */
-				      <0x00078600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_0_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: phy@79000 {
@@ -369,8 +357,14 @@
 		gcc: gcc@1800000 {
 			compatible = "qcom,gcc-ipq8074";
 			reg = <0x01800000 0x80000>;
-			clocks = <&xo>, <&sleep_clk>;
-			clock-names = "xo", "sleep_clk";
+			clocks = <&xo>,
+				 <&sleep_clk>,
+				 <&pcie_qmp0>,
+				 <&pcie_qmp1>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "pcie0_pipe",
+				      "pcie1_pipe";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
@@ -406,7 +400,7 @@
 		};
 
 		sdhc_1: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x500>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 
@@ -523,6 +517,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c5: i2c@78b9000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -628,7 +636,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -670,7 +678,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phys = <&qusb_phy_1>, <&ssphy_1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -708,8 +716,8 @@
 			compatible = "qcom,ipq8074-apcs-apps-global",
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;
@@ -781,7 +789,7 @@
 			};
 		};
 
-		pcie1: pci@10000000 {
+		pcie1: pcie@10000000 {
 			compatible = "qcom,pcie-ipq8074";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
@@ -806,13 +814,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142
+			interrupt-map = <0 0 0 1 &intc 0 0 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143
+					<0 0 0 2 &intc 0 0 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144
+					<0 0 0 3 &intc 0 0 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145
+					<0 0 0 4 &intc 0 0 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -842,7 +850,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq8074-gen3";
 			reg = <0x20000000 0xf1d>,
 			      <0x20000f20 0xa8>,
@@ -868,13 +876,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
+			interrupt-map = <0 0 0 1 &intc 0 0 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
+					<0 0 0 2 &intc 0 0 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
+					<0 0 0 3 &intc 0 0 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
+					<0 0 0 4 &intc 0 0 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git a/src/arm64/qcom/ipq9574-rdp-common.dtsi b/src/arm64/qcom/ipq9574-rdp-common.dtsi
new file mode 100644
index 0000000..91e104b
--- /dev/null
+++ b/src/arm64/qcom/ipq9574-rdp-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP board common device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq9574.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-supply = <&regulator_fixed_0p925>;
+
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	vdd-supply = <&regulator_fixed_0p925>;
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/src/arm64/qcom/ipq9574-rdp418.dts b/src/arm64/qcom/ipq9574-rdp418.dts
index 2b093e0..f4f9199 100644
--- a/src/arm64/qcom/ipq9574-rdp418.dts
+++ b/src/arm64/qcom/ipq9574-rdp418.dts
@@ -8,58 +8,12 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
 	compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -74,10 +28,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -110,15 +60,4 @@
 			bias-pull-down;
 		};
 	};
-
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
 };
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
-};
diff --git a/src/arm64/qcom/ipq9574-rdp433.dts b/src/arm64/qcom/ipq9574-rdp433.dts
index 877026c..1bb8d96 100644
--- a/src/arm64/qcom/ipq9574-rdp433.dts
+++ b/src/arm64/qcom/ipq9574-rdp433.dts
@@ -8,69 +8,11 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
 	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulator_fixed_3p3: s3300 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_3p3";
-	};
-
-	regulator_fixed_0p925: s0925 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <925000>;
-		regulator-max-microvolt = <925000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_0p925";
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-
-		mp5496_l2: l2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -85,10 +27,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -122,30 +60,3 @@
 		};
 	};
 };
-
-&usb_0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-supply = <&regulator_fixed_0p925>;
-
-	status = "okay";
-};
-
-&usb_0_qusbphy {
-	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
-
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
-};
diff --git a/src/arm64/qcom/ipq9574-rdp449.dts b/src/arm64/qcom/ipq9574-rdp449.dts
index c8fa54e..d36d107 100644
--- a/src/arm64/qcom/ipq9574-rdp449.dts
+++ b/src/arm64/qcom/ipq9574-rdp449.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
 	compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/src/arm64/qcom/ipq9574-rdp453.dts b/src/arm64/qcom/ipq9574-rdp453.dts
index f01de66..c30c9fb 100644
--- a/src/arm64/qcom/ipq9574-rdp453.dts
+++ b/src/arm64/qcom/ipq9574-rdp453.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
 	compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/src/arm64/qcom/ipq9574-rdp454.dts b/src/arm64/qcom/ipq9574-rdp454.dts
index 6efae34..0dc382f 100644
--- a/src/arm64/qcom/ipq9574-rdp454.dts
+++ b/src/arm64/qcom/ipq9574-rdp454.dts
@@ -8,73 +8,9 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
 	compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/src/arm64/qcom/ipq9574.dtsi b/src/arm64/qcom/ipq9574.dtsi
index 8a72ad4..5f83ee4 100644
--- a/src/arm64/qcom/ipq9574.dtsi
+++ b/src/arm64/qcom/ipq9574.dtsi
@@ -106,42 +106,56 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
 		opp-936000000 {
 			opp-hz = /bits/ 64 <936000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1104000000 {
 			opp-hz = /bits/ 64 <1104000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <862500>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+		};
+
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1488000000 {
 			opp-hz = /bits/ 64 <1488000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-2208000000 {
 			opp-hz = /bits/ 64 <2208000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -223,6 +237,11 @@
 			reg = <0x000a4000 0x5a1>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@15 {
+				reg = <0x15 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		cryptobam: dma-controller@704000 {
@@ -652,8 +671,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a73pll>, <&xo_board_clk>;
-			clock-names = "pll", "xo";
+			clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
diff --git a/src/arm64/qcom/msm8916-acer-a1-724.dts b/src/arm64/qcom/msm8916-acer-a1-724.dts
index 57a74ee..b32c7a9 100644
--- a/src/arm64/qcom/msm8916-acer-a1-724.dts
+++ b/src/arm64/qcom/msm8916-acer-a1-724.dts
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * NOTE: The original firmware from Acer can only boot 32-bit kernels.
@@ -83,6 +84,29 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
diff --git a/src/arm64/qcom/msm8916-alcatel-idol347.dts b/src/arm64/qcom/msm8916-alcatel-idol347.dts
index aa4c1ab..3459145 100644
--- a/src/arm64/qcom/msm8916-alcatel-idol347.dts
+++ b/src/arm64/qcom/msm8916-alcatel-idol347.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -22,6 +24,19 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		/delete-node/ reserved@86680000;
+		/delete-node/ rmtfs@86700000;
+
+		rmtfs: rmtfs@86680000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86680000 0x0 0x160000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,6 +65,17 @@
 		};
 	};
 
+	reg_headphones_avdd: regulator-headphones-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "headphones_avdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&headphones_avdd_default>;
+		pinctrl-names = "default";
+	};
+
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
@@ -58,8 +84,41 @@
 	};
 };
 
-&blsp_uart2 {
+&blsp_i2c3 {
 	status = "okay";
+
+	headphones: audio-codec@10 {
+		compatible = "asahi-kasei,ak4375";
+		reg = <0x10>;
+		avdd-supply = <&reg_headphones_avdd>;
+		tvdd-supply = <&pm8916_l6>;
+		pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&headphones_pdn_default>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_top: audio-codec@34 {
+		compatible = "nxp,tfa9897";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_top_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Top";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_bottom: audio-codec@36 {
+		compatible = "nxp,tfa9897";
+		reg = <0x36>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_bottom_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Bottom";
+		#sound-dai-cells = <0>;
+	};
 };
 
 &blsp_i2c4 {
@@ -153,6 +212,22 @@
 	};
 };
 
+&blsp_uart2 {
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -169,6 +244,17 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@18 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -183,6 +269,54 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/* Add pin switches for speakers to allow disabling them individually */
+	model = "alcatel-idol3";
+	widgets =
+		"Speaker", "Speaker Top",
+		"Speaker", "Speaker Bottom";
+	pin-switches = "Speaker Top", "Speaker Bottom";
+	audio-routing =
+		"Speaker Top", "Speaker Top OUT",
+		"Speaker Bottom", "Speaker Bottom OUT",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>;
+		};
+	};
+};
+
+&sound_link_backend0 {
+	/* Primary MI2S is not used, replace with Secondary MI2S for headphones */
+	link-name = "Secondary MI2S";
+
+	cpu {
+		sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+	};
+	platform {
+		sound-dai = <&q6routing>;
+	};
+	codec {
+		sound-dai = <&headphones>;
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -212,6 +346,15 @@
 	status = "okay";
 };
 
+/* Only some of the pins are used */
+&pri_mi2s_default {
+	pins = "gpio113", "gpio115";
+};
+
+&pri_mi2s_sleep {
+	pins = "gpio113", "gpio115";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio31";
@@ -245,6 +388,20 @@
 		bias-disable;
 	};
 
+	headphones_avdd_default: headphones-avdd-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	headphones_pdn_default: headphones-pdn-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	/*
 	 * The OEM wired an additional GPIO to be asserted so that
 	 * the si-en,sn3190 LED IC works. Since this GPIO is not
@@ -291,6 +448,20 @@
 		bias-disable;
 	};
 
+	speaker_bottom_default: speaker-bottom-default-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	speaker_top_default: speaker-top-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	ts_int_reset_default: ts-int-reset-default-state {
 		pins = "gpio13", "gpio100";
 		function = "gpio";
diff --git a/src/arm64/qcom/msm8916-asus-z00l.dts b/src/arm64/qcom/msm8916-asus-z00l.dts
index a8be6ff..77618c7 100644
--- a/src/arm64/qcom/msm8916-asus-z00l.dts
+++ b/src/arm64/qcom/msm8916-asus-z00l.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -130,6 +132,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_rpm_regulators {
 	pm8916_l17: l17 {
 		regulator-min-microvolt = <2850000>;
@@ -151,6 +165,13 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
diff --git a/src/arm64/qcom/msm8916-longcheer-l8150.dts b/src/arm64/qcom/msm8916-longcheer-l8150.dts
index 47d1c5c..3a3e794 100644
--- a/src/arm64/qcom/msm8916-longcheer-l8150.dts
+++ b/src/arm64/qcom/msm8916-longcheer-l8150.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -25,19 +27,47 @@
 
 	/*
 	 * For some reason, the signed wcnss firmware is not relocatable.
-	 * It must be loaded at 0x8b600000. All other firmware is relocatable,
-	 * so place wcnss at the fixed address and then all other firmware
-	 * regions will be automatically allocated at a fitting place.
+	 * It must be loaded at 0x8b600000. Unfortunately, this also means that
+	 * mpss_mem does not fit when loaded to the typical address at 0x86800000.
+	 *
+	 * Load wcnss_mem to the fixed address and relocate mpss_mem to the next
+	 * working higher address. For some reason the modem firmware does not
+	 * boot when placed at 0x8a800000 to 0x8e800000.
 	 */
 	reserved-memory {
+		/delete-node/ mpss@86800000;
 		/delete-node/ wcnss;
 
 		wcnss_mem: wcnss@8b600000 {
 			reg = <0x0 0x8b600000 0x0 0x600000>;
 			no-map;
 		};
+
+		mpss_mem: mpss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x5000000>;
+			no-map;
+		};
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <9500000>;
+		charge-full-design-microamp-hours = <2500000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
+			<4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
+			<4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
+			<3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
+			<3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
+			<3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
+			<3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
+			<3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
+			<3000000 0>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -93,6 +123,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
 
 		led@0 {
 			reg = <0>;
@@ -223,6 +254,29 @@
 
 &blsp_uart2 {
 	status = "okay";
+};
+
+&pm8916_bms {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+	power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+
+	qcom,fast-charge-safe-current = <900000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
 };
 
 &pm8916_resin {
@@ -237,10 +291,6 @@
 	};
 };
 
-&pm8916_usbin {
-	status = "okay";
-};
-
 &pm8916_vib {
 	status = "okay";
 };
@@ -254,14 +304,21 @@
 	non-removable;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS Internal1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS Internal3";
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "peripheral";
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &usb_hs_phy {
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &venus {
diff --git a/src/arm64/qcom/msm8916-longcheer-l8910.dts b/src/arm64/qcom/msm8916-longcheer-l8910.dts
index 41cadb9..3b7fdb6 100644
--- a/src/arm64/qcom/msm8916-longcheer-l8910.dts
+++ b/src/arm64/qcom/msm8916-longcheer-l8910.dts
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "BQ Aquaris X5 (Longcheer L8910)";
@@ -22,6 +25,16 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+
+		pinctrl-0 = <&spk_ext_pa_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
@@ -74,6 +87,46 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -107,6 +160,27 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -137,6 +211,28 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker separately.
+	 * The hardware does not provide a way to disable the output via the
+	 * headphone jack when the speaker is enabled.
+	 */
+	model = "bq-paella";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker";
+	audio-routing =
+		"Speaker", "Speaker Amp OUT",
+		"Speaker Amp IN", "HPH_R",
+		"Headphones", "HPH_L",
+		"Headphones", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+	aux-devs = <&speaker_amp>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -205,6 +301,13 @@
 		bias-disable;
 	};
 
+	spk_ext_pa_default: spk-ext-pa-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
diff --git a/src/arm64/qcom/msm8916-modem-qdsp6.dtsi b/src/arm64/qcom/msm8916-modem-qdsp6.dtsi
new file mode 100644
index 0000000..0399616
--- /dev/null
+++ b/src/arm64/qcom/msm8916-modem-qdsp6.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices
+ * (or similar SoCs) with audio routed via the QDSP6 services provided by the
+ * modem firmware. The digital/analog codec in the SoC/PMIC is used by default,
+ * but boards can define additional codecs by adding additional backend DAI links.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+&apr {
+	status = "okay";
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&lpass {
+	status = "reserved"; /* Controlled by QDSP6 */
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mba_mem {
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+};
+
+&mpss_mem {
+	status = "okay";
+};
+
+&pm8916_codec {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <0 1>;
+	};
+	dai@20 {
+		reg = <TERTIARY_MI2S_TX>;
+		qcom,sd-lines = <0 1>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@1 {
+		reg = <1>;
+		direction = <Q6ASM_DAI_TX>;
+	};
+	dai@2 {
+		reg = <2>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@3 {
+		reg = <3>;
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+	};
+};
+
+&sound {
+	compatible = "qcom,msm8916-qdsp6-sndcard";
+	model = "msm8916";
+
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	frontend0-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	frontend1-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	frontend2-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	frontend3-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	sound_link_backend0: backend0-dai-link {
+		link-name = "Primary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	sound_link_backend1: backend1-dai-link {
+		link-name = "Tertiary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai TERTIARY_MI2S_TX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
diff --git a/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
index 0b29132..2937495 100644
--- a/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -196,6 +199,18 @@
 	};
 };
 
+&blsp_i2c1 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c2 {
 	status = "okay";
 
@@ -243,6 +258,25 @@
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -253,6 +287,10 @@
 	pinctrl-1 = <&mdss_sleep>;
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -265,6 +303,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -279,6 +324,32 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
diff --git a/src/arm64/qcom/msm8916-samsung-a3u-eur.dts b/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
index f5a8083..3b934f5 100644
--- a/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
+++ b/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
@@ -49,11 +49,6 @@
 	};
 };
 
-&touchkey {
-	vcc-supply = <&reg_touch_key>;
-	vdd-supply = <&reg_key_led>;
-};
-
 &accelerometer {
 	mount-matrix = "0", "1", "0",
 		       "1", "0", "0",
@@ -108,6 +103,11 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_key_led>;
+};
+
 &vibrator {
 	status = "okay";
 };
diff --git a/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi b/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
index 0824ab0..3c49dac 100644
--- a/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
@@ -65,6 +65,10 @@
 	};
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &reg_motor_vdd {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
diff --git a/src/arm64/qcom/msm8916-samsung-grandmax.dts b/src/arm64/qcom/msm8916-samsung-grandmax.dts
index 3f145dd..5882b3a 100644
--- a/src/arm64/qcom/msm8916-samsung-grandmax.dts
+++ b/src/arm64/qcom/msm8916-samsung-grandmax.dts
@@ -49,6 +49,10 @@
 	status = "disabled";
 };
 
+&sound {
+	model = "samsung-gmax"; /* No secondary microphone */
+};
+
 &tlmm {
 	gpio_leds_default: gpio-led-default-state {
 		pins = "gpio60";
diff --git a/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi b/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi
index c19cf20..fbd2caf 100644
--- a/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -65,25 +68,6 @@
 	};
 };
 
-&blsp_i2c4 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max77849-battery";
-		reg = <0x36>;
-
-		maxim,rsns-microohm = <10000>;
-		maxim,over-heat-temp = <600>;
-		maxim,over-volt = <4400>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-0 = <&fuelgauge_int_default>;
-		pinctrl-names = "default";
-	};
-};
-
 &blsp_i2c2 {
 	status = "okay";
 
@@ -112,10 +96,52 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77849-battery";
+		reg = <0x36>;
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4400>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -133,6 +159,13 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -147,6 +180,27 @@
 	status = "okay";
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	dr_mode = "peripheral";
 	extcon = <&pm8916_usbin>;
diff --git a/src/arm64/qcom/msm8916-samsung-gt510.dts b/src/arm64/qcom/msm8916-samsung-gt510.dts
index 75c4854..5b34529 100644
--- a/src/arm64/qcom/msm8916-samsung-gt510.dts
+++ b/src/arm64/qcom/msm8916-samsung-gt510.dts
@@ -9,6 +9,14 @@
 	compatible = "samsung,gt510", "qcom,msm8916";
 	chassis-type = "tablet";
 
+	speaker_codec: audio-codec {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		pinctrl-0 = <&audio_sdmode_default>;
+		pinctrl-names = "default";
+	};
+
 	clk_pwm: pwm {
 		compatible = "clk-pwm";
 		#pwm-cells = <2>;
@@ -112,6 +120,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -142,7 +154,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-gt510";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	audio_sdmode_default: audio-sdmode-default-state {
+		pins = "gpio55";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio51";
 		function = "gpio";
diff --git a/src/arm64/qcom/msm8916-samsung-gt58.dts b/src/arm64/qcom/msm8916-samsung-gt58.dts
index 11359bc..579312e 100644
--- a/src/arm64/qcom/msm8916-samsung-gt58.dts
+++ b/src/arm64/qcom/msm8916-samsung-gt58.dts
@@ -35,6 +35,26 @@
 		pinctrl-names = "default";
 	};
 
+	i2c-amplifier {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&amp_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		speaker_codec: audio-codec@34 {
+			compatible = "nxp,tfa9895";
+			reg = <0x34>;
+			vddd-supply = <&pm8916_l5>;
+			sound-name-prefix = "Speaker";
+			#sound-dai-cells = <0>;
+		};
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
@@ -64,6 +84,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -94,7 +118,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	amp_i2c_default: amp-i2c-default-state {
+		pins = "gpio55", "gpio56";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio8";
 		function = "gpio";
@@ -123,6 +161,14 @@
 		bias-disable;
 	};
 
+	secondary_mic_default: secondary-mic-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
 	tsp_int_default: tsp-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
diff --git a/src/arm64/qcom/msm8916-samsung-j5-common.dtsi b/src/arm64/qcom/msm8916-samsung-j5-common.dtsi
index fe59be3..5ca2ada 100644
--- a/src/arm64/qcom/msm8916-samsung-j5-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-j5-common.dtsi
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -135,6 +137,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -154,6 +160,14 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
diff --git a/src/arm64/qcom/msm8916-samsung-j5.dts b/src/arm64/qcom/msm8916-samsung-j5.dts
index 58c2f5a..ba86509 100644
--- a/src/arm64/qcom/msm8916-samsung-j5.dts
+++ b/src/arm64/qcom/msm8916-samsung-j5.dts
@@ -19,6 +19,10 @@
 	status = "disabled";
 };
 
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+};
+
 &touchscreen {
 	/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
 };
diff --git a/src/arm64/qcom/msm8916-samsung-serranove.dts b/src/arm64/qcom/msm8916-samsung-serranove.dts
index 68da2a2..5ce8f13 100644
--- a/src/arm64/qcom/msm8916-samsung-serranove.dts
+++ b/src/arm64/qcom/msm8916-samsung-serranove.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -319,6 +321,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -350,6 +356,13 @@
 	no-1-8-v;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
diff --git a/src/arm64/qcom/msm8916-thwc-uf896.dts b/src/arm64/qcom/msm8916-thwc-uf896.dts
index 6fe1850..f349975 100644
--- a/src/arm64/qcom/msm8916-thwc-uf896.dts
+++ b/src/arm64/qcom/msm8916-thwc-uf896.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git a/src/arm64/qcom/msm8916-thwc-ufi001c.dts b/src/arm64/qcom/msm8916-thwc-ufi001c.dts
index 16d4a91..6cb3911 100644
--- a/src/arm64/qcom/msm8916-thwc-ufi001c.dts
+++ b/src/arm64/qcom/msm8916-thwc-ufi001c.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 };
 
-&led_r {
-	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 };
 
 &mpss {
diff --git a/src/arm64/qcom/msm8916-wingtech-wt88047.dts b/src/arm64/qcom/msm8916-wingtech-wt88047.dts
index 419f35c..510b3b3 100644
--- a/src/arm64/qcom/msm8916-wingtech-wt88047.dts
+++ b/src/arm64/qcom/msm8916-wingtech-wt88047.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -25,6 +27,28 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp";
+		pinctrl-0 = <&speaker_amp_default>;
+		pinctrl-names = "default";
+	};
+
+	/*
+	 * This seems to be actually an analog switch that either routes audio
+	 * to the headphone jack or nowhere. Given that we need to enable a GPIO
+	 * to get sound on headphones, modelling it as simple-audio-amplifier
+	 * works just fine.
+	 */
+	headphones_switch: audio-switch {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Switch";
+		pinctrl-0 = <&headphones_switch_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
@@ -118,6 +142,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
 
 		led@0 {
 			reg = <0>;
@@ -146,6 +171,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5100000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -180,6 +217,30 @@
 	non-removable;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker and headphones
+	 * separately. Both are routed via the HPH_L/HPH_R pins of the codec.
+	 */
+	model = "wt88047";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker", "Headphones";
+	audio-routing =
+		"Speaker", "Speaker Amp OUTL",
+		"Speaker", "Speaker Amp OUTR",
+		"Speaker Amp INL", "HPH_R",
+		"Speaker Amp INR", "HPH_R",
+		"Headphones", "Headphones Switch OUTL",
+		"Headphones", "Headphones Switch OUTR",
+		"Headphones Switch INL", "HPH_L",
+		"Headphones Switch INR", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2";
+	aux-devs = <&speaker_amp>, <&headphones_switch>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -226,6 +287,13 @@
 		bias-pull-up;
 	};
 
+	headphones_switch_default: headphones-switch-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	imu_default: imu-default-state {
 		pins = "gpio115";
 		function = "gpio";
@@ -234,6 +302,13 @@
 		bias-disable;
 	};
 
+	speaker_amp_default: speaker-amp-default-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	touchscreen_default: touchscreen-default-state {
 		touchscreen-pins {
 			pins = "gpio13";
diff --git a/src/arm64/qcom/msm8916-yiming-uz801v3.dts b/src/arm64/qcom/msm8916-yiming-uz801v3.dts
index 5e6ba8c..a98efcf 100644
--- a/src/arm64/qcom/msm8916-yiming-uz801v3.dts
+++ b/src/arm64/qcom/msm8916-yiming-uz801v3.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git a/src/arm64/qcom/msm8916.dtsi b/src/arm64/qcom/msm8916.dtsi
index 4f799b5..e423c57 100644
--- a/src/arm64/qcom/msm8916.dtsi
+++ b/src/arm64/qcom/msm8916.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -539,9 +540,6 @@
 			compatible = "qcom,msm8916-bimc";
 			reg = <0x00400000 0x62000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -574,18 +572,12 @@
 			compatible = "qcom,msm8916-pcnoc";
 			reg = <0x00500000 0x11000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8916-snoc";
 			reg = <0x00580000 0x14000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		stm: stm@802000 {
@@ -1989,6 +1981,54 @@
 
 				label = "hexagon";
 
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,smd-channels = "fastrpcsmd-apps-dsp";
@@ -2106,6 +2146,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
diff --git a/src/arm64/qcom/msm8939-huawei-kiwi.dts b/src/arm64/qcom/msm8939-huawei-kiwi.dts
new file mode 100644
index 0000000..3cec518
--- /dev/null
+++ b/src/arm64/qcom/msm8939-huawei-kiwi.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Huawei Honor 5X / GR5 (2016)";
+	compatible = "huawei,kiwi", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1600000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <25000>;
+		amstaos,proximity-diodes = <0>;
+
+		pinctrl-0 = <&prox_irq_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@1c {
+		compatible = "cypress,tt21000";
+
+		reg = <0x1c>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
+		 * fixed regulator that is automatically enabled by pm8916_l16.
+		 */
+		vdd-supply = <&pm8916_l16>;
+		vddio-supply = <&pm8916_l16>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_l8 {
+	regulator-min-microvolt = <2950000>;
+	regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	prox_irq_default: prox-irq-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/src/arm64/qcom/msm8939-longcheer-l9100.dts b/src/arm64/qcom/msm8939-longcheer-l9100.dts
index 6802714..e3404c4 100644
--- a/src/arm64/qcom/msm8939-longcheer-l9100.dts
+++ b/src/arm64/qcom/msm8939-longcheer-l9100.dts
@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
 / {
@@ -120,6 +121,46 @@
 
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -139,6 +180,7 @@
 	light-sensor@23 {
 		compatible = "liteon,ltr559";
 		reg = <0x23>;
+		proximity-near-level = <75>;
 
 		vdd-supply = <&pm8916_l17>;
 		vddio-supply = <&pm8916_l5>;
@@ -184,6 +226,16 @@
 	status = "okay";
 };
 
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_mpps {
 	pwm_out: mpp4-state {
 		pins = "mpp4";
@@ -247,6 +299,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	button_backlight_default: button-backlight-default-state {
 		pins = "gpio17";
diff --git a/src/arm64/qcom/msm8939-samsung-a7.dts b/src/arm64/qcom/msm8939-samsung-a7.dts
index fccd8fe..aa6c394 100644
--- a/src/arm64/qcom/msm8939-samsung-a7.dts
+++ b/src/arm64/qcom/msm8939-samsung-a7.dts
@@ -3,10 +3,12 @@
 /dts-v1/;
 
 #include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	model = "Samsung Galaxy A7 (2015)";
@@ -287,6 +289,18 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -309,6 +323,29 @@
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -321,6 +358,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -335,6 +379,32 @@
 	status = "okay";
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
diff --git a/src/arm64/qcom/msm8939.dtsi b/src/arm64/qcom/msm8939.dtsi
index 324b5d2..82d85ff 100644
--- a/src/arm64/qcom/msm8939.dtsi
+++ b/src/arm64/qcom/msm8939.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -601,9 +602,6 @@
 		bimc: interconnect@400000 {
 			compatible = "qcom,msm8939-bimc";
 			reg = <0x00400000 0x62000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
@@ -647,25 +645,16 @@
 		pcnoc: interconnect@500000 {
 			compatible = "qcom,msm8939-pcnoc";
 			reg = <0x00500000 0x11000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8939-snoc";
 			reg = <0x00580000 0x14080>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 			#interconnect-cells = <1>;
 
 			snoc_mm: interconnect-snoc {
 				compatible = "qcom,msm8939-snoc-mm";
-				clock-names = "bus", "bus_a";
-				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
-					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
 				#interconnect-cells = <1>;
 			};
 		};
@@ -1537,6 +1526,20 @@
 			#interrupt-cells = <4>;
 		};
 
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>, <0x04020000 0x040>;
@@ -1569,6 +1572,22 @@
 			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
 			status = "disabled";
 
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&hexagon_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
 			mba {
 				memory-region = <&mba_mem>;
 			};
@@ -1585,6 +1604,54 @@
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
+
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1682,6 +1749,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
@@ -2116,6 +2184,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			/* Necessary because firmware does not configure this correctly */
+			clock-frequency = <19200000>;
 
 			frame@b121000 {
 				reg = <0x0b121000 0x1000>,
diff --git a/src/arm64/qcom/msm8953-xiaomi-mido.dts b/src/arm64/qcom/msm8953-xiaomi-mido.dts
index ed95d09..6b9245c 100644
--- a/src/arm64/qcom/msm8953-xiaomi-mido.dts
+++ b/src/arm64/qcom/msm8953-xiaomi-mido.dts
@@ -111,6 +111,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/src/arm64/qcom/msm8953-xiaomi-tissot.dts b/src/arm64/qcom/msm8953-xiaomi-tissot.dts
index 61ff629..9ac4f50 100644
--- a/src/arm64/qcom/msm8953-xiaomi-tissot.dts
+++ b/src/arm64/qcom/msm8953-xiaomi-tissot.dts
@@ -104,6 +104,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/src/arm64/qcom/msm8953-xiaomi-vince.dts b/src/arm64/qcom/msm8953-xiaomi-vince.dts
index 1a1d3f9..b0588f3 100644
--- a/src/arm64/qcom/msm8953-xiaomi-vince.dts
+++ b/src/arm64/qcom/msm8953-xiaomi-vince.dts
@@ -113,6 +113,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/src/arm64/qcom/msm8953.dtsi b/src/arm64/qcom/msm8953.dtsi
index e7de763..ad2f8cf 100644
--- a/src/arm64/qcom/msm8953.dtsi
+++ b/src/arm64/qcom/msm8953.dtsi
@@ -174,10 +174,10 @@
 		};
 	};
 
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x10000000 0 0>;
 	};
 
 	pmu {
@@ -726,6 +726,48 @@
 				bias-disable;
 			};
 
+			spi_3_default: spi-3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_spi3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_3_sleep: spi-3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_default: spi-5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_spi5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_sleep: spi-5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_default: spi-6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_spi6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_sleep: spi-6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			wcnss_pin_a: wcnss-active-state {
 
 				wcss-wlan2-pins {
@@ -1004,7 +1046,7 @@
 
 		apps_iommu: iommu@1e20000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
-			ranges  = <0 0x01e20000 0x20000>;
+			ranges = <0 0x01e20000 0x20000>;
 
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
@@ -1360,6 +1402,26 @@
 			status = "disabled";
 		};
 
+		spi_3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_3_default>;
+			pinctrl-1 = <&spi_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b8000 0x600>;
@@ -1413,6 +1475,26 @@
 			status = "disabled";
 		};
 
+		spi_5: spi@7af5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_5_default>;
+			pinctrl-1 = <&spi_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_6: i2c@7af6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af6000 0x600>;
@@ -1433,6 +1515,26 @@
 			status = "disabled";
 		};
 
+		spi_6: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_6_default>;
+			pinctrl-1 = <&spi_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_7: i2c@7af7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af7000 0x600>;
@@ -1645,7 +1747,7 @@
 				apr {
 					compatible = "qcom,apr-v2";
 					qcom,smd-channels = "apr_audio_svc";
-					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					qcom,domain = <APR_DOMAIN_ADSP>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
diff --git a/src/arm64/qcom/msm8996.dtsi b/src/arm64/qcom/msm8996.dtsi
index 6ba9da9..ee6f87c 100644
--- a/src/arm64/qcom/msm8996.dtsi
+++ b/src/arm64/qcom/msm8996.dtsi
@@ -444,6 +444,19 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -779,10 +792,10 @@
 				 <&pciephy_0>,
 				 <&pciephy_1>,
 				 <&pciephy_2>,
-				 <&ssusb_phy_0>,
-				 <&ufsphy_lane 0>,
-				 <&ufsphy_lane 1>,
-				 <&ufsphy_lane 2>;
+				 <&usb3phy>,
+				 <&ufsphy 0>,
+				 <&ufsphy 1>,
+				 <&ufsphy 2>;
 			clock-names = "cxo",
 				      "cxo2",
 				      "sleep_clk",
@@ -799,9 +812,6 @@
 			compatible = "qcom,msm8996-bimc";
 			reg = <0x00408000 0x5a000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens0: thermal-sensor@4a9000 {
@@ -852,18 +862,12 @@
 			compatible = "qcom,msm8996-cnoc";
 			reg = <0x00500000 0x1000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@524000 {
 			compatible = "qcom,msm8996-snoc";
 			reg = <0x00524000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		a0noc: interconnect@543000 {
@@ -883,19 +887,14 @@
 			compatible = "qcom,msm8996-a1noc";
 			reg = <0x00562000 0x5000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
 		};
 
 		a2noc: interconnect@583000 {
 			compatible = "qcom,msm8996-a2noc";
 			reg = <0x00583000 0x7000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+			clock-names = "aggre2_ufs_axi", "ufs_axi";
+			clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>;
 		};
 
@@ -903,19 +902,14 @@
 			compatible = "qcom,msm8996-mnoc";
 			reg = <0x005a4000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
-				 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		pnoc: interconnect@5c0000 {
 			compatible = "qcom,msm8996-pnoc";
 			reg = <0x005c0000 0x3000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		tcsr_mutex: hwlock@740000 {
@@ -2047,7 +2041,7 @@
 			reg = <0x00624000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 
-			phys = <&ufsphy_lane>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 
 			power-domains = <&gcc UFS_GDSC>;
@@ -2100,25 +2094,18 @@
 
 		ufsphy: phy@627000 {
 			compatible = "qcom,msm8996-qmp-ufs-phy";
-			reg = <0x00627000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00627000 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
 			clock-names = "ref";
 
 			resets = <&ufshc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufsphy_lane: phy@627400 {
-				reg = <0x627400 0x12c>,
-				      <0x627600 0x200>,
-				      <0x627c00 0x1b4>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		camss: camss@a34000 {
@@ -2453,9 +2440,8 @@
 					  "handover",
 					  "stop-ack";
 
-			clocks = <&xo_board>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&xo_board>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2500,10 +2486,15 @@
 				 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
 				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
 				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_CLK>,
 				 <&rpmcc RPM_SMD_QDSS_CLK>;
-			clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
-				      "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo",
+				      "gpll0_mss",
+				      "snoc_axi",
+				      "mnoc_axi",
+				      "qdss";
 
 			resets = <&gcc GCC_MSS_RESTART>;
 			reset-names = "mss_restart";
@@ -2644,6 +2635,14 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
@@ -3056,7 +3055,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phys = <&hsusb_phy1>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
@@ -3068,32 +3067,26 @@
 
 		usb3phy: phy@7410000 {
 			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x07410000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x07410000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
-
-			ssusb_phy_0: phy@7410200 {
-				reg = <0x07410200 0x200>,
-				      <0x07410400 0x130>,
-				      <0x07410600 0x1a8>;
-				#phy-cells = <0>;
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-				#clock-cells = <0>;
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
+			status = "disabled";
 		};
 
 		hsusb_phy1: phy@7411000 {
diff --git a/src/arm64/qcom/msm8998.dtsi b/src/arm64/qcom/msm8998.dtsi
index b485bf9..2793cc2 100644
--- a/src/arm64/qcom/msm8998.dtsi
+++ b/src/arm64/qcom/msm8998.dtsi
@@ -933,7 +933,7 @@
 				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
 			reg = <0x01c00000 0x2000>,
 			      <0x1b000000 0xf1d>,
@@ -1004,7 +1004,7 @@
 			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x01da4000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufsphy_lanes>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_GDSC>;
@@ -1045,11 +1045,7 @@
 
 		ufsphy: phy@1da7000 {
 			compatible = "qcom,msm8998-qmp-ufs-phy";
-			reg = <0x01da7000 0x18c>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges;
+			reg = <0x01da7000 0x1000>;
 
 			clock-names =
 				"ref",
@@ -1061,14 +1057,8 @@
 			reset-names = "ufsphy";
 			resets = <&ufshc 0>;
 
-			ufsphy_lanes: phy@1da7400 {
-				reg = <0x01da7400 0x128>,
-				      <0x01da7600 0x1fc>,
-				      <0x01da7c00 0x1dc>,
-				      <0x01da7800 0x128>,
-				      <0x01da7a00 0x1fc>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -1615,9 +1605,8 @@
 
 			px-supply = <&vreg_lvs2a_1p8>;
 
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2031,9 +2020,11 @@
 
 			cpu = <&CPU4>;
 
-			port {
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -2048,9 +2039,11 @@
 
 			cpu = <&CPU5>;
 
-			port {
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -2065,9 +2058,11 @@
 
 			cpu = <&CPU6>;
 
-			port {
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -2082,9 +2077,11 @@
 
 			cpu = <&CPU7>;
 
-			port {
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
@@ -2149,7 +2146,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2158,33 +2155,26 @@
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
diff --git a/src/arm64/qcom/pm7250b.dtsi b/src/arm64/qcom/pm7250b.dtsi
index df0afe8..3bf7cf5 100644
--- a/src/arm64/qcom/pm7250b.dtsi
+++ b/src/arm64/qcom/pm7250b.dtsi
@@ -148,7 +148,7 @@
 			status = "disabled";
 		};
 
-		pm7250b_gpios: pinctrl@c000 {
+		pm7250b_gpios: gpio@c000 {
 			compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/src/arm64/qcom/pm8550.dtsi b/src/arm64/qcom/pm8550.dtsi
index db3d5c1..797a18c 100644
--- a/src/arm64/qcom/pm8550.dtsi
+++ b/src/arm64/qcom/pm8550.dtsi
@@ -64,9 +64,6 @@
 
 		pm8550_pwm: pwm {
 			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#pwm-cells = <2>;
 
 			status = "disabled";
diff --git a/src/arm64/qcom/pm8550ve.dtsi b/src/arm64/qcom/pm8550ve.dtsi
index c47646a..4dc1f03 100644
--- a/src/arm64/qcom/pm8550ve.dtsi
+++ b/src/arm64/qcom/pm8550ve.dtsi
@@ -33,16 +33,16 @@
 
 
 &spmi_bus {
-	pm8550ve: pmic@5 {
+	pm8550ve: pmic@PMK8550VE_SID {
 		compatible = "qcom,pm8550", "qcom,spmi-pmic";
-		reg = <0x5 SPMI_USID>;
+		reg = <PMK8550VE_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm8550ve_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
diff --git a/src/arm64/qcom/pm8916.dtsi b/src/arm64/qcom/pm8916.dtsi
index f4de867..4b2e8fb 100644
--- a/src/arm64/qcom/pm8916.dtsi
+++ b/src/arm64/qcom/pm8916.dtsi
@@ -41,6 +41,35 @@
 			};
 		};
 
+		pm8916_charger: charger@1000 {
+			compatible = "qcom,pm8916-lbc";
+			reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
+			reg-names = "chgr", "bat_if", "usb", "misc";
+
+			interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "vbat_det",
+					  "fast_chg",
+					  "chg_fail",
+					  "chg_done",
+					  "bat_pres",
+					  "temp_ok",
+					  "coarse_det",
+					  "usb_vbus",
+					  "chg_gone",
+					  "overtemp";
+
+			status = "disabled";
+		};
+
 		pm8916_usbin: usb-detect@1300 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x1300>;
@@ -91,6 +120,25 @@
 			};
 		};
 
+		pm8916_bms: battery@4000 {
+			compatible = "qcom,pm8916-bms-vm";
+			reg = <0x4000>;
+			interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "cv_leave",
+					  "cv_enter",
+					  "ocv_good",
+					  "ocv_thr",
+					  "fifo",
+					  "state_chg";
+
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;
diff --git a/src/arm64/qcom/pmk8350.dtsi b/src/arm64/qcom/pmk8350.dtsi
index 1eb7401..f0ed154 100644
--- a/src/arm64/qcom/pmk8350.dtsi
+++ b/src/arm64/qcom/pmk8350.dtsi
@@ -22,7 +22,7 @@
 		mode-bootloader = <0x02>;
 	};
 };
-	
+
 &spmi_bus {
 	pmk8350: pmic@PMK8350_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
diff --git a/src/arm64/qcom/qcm2290.dtsi b/src/arm64/qcom/qcm2290.dtsi
index d46e591..0911fb0 100644
--- a/src/arm64/qcom/qcm2290.dtsi
+++ b/src/arm64/qcom/qcm2290.dtsi
@@ -5,12 +5,15 @@
  * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,qcm2290.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
@@ -150,6 +153,8 @@
 			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 			clock-names = "core";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -194,6 +199,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP>;
 		};
 	};
@@ -261,6 +267,24 @@
 				};
 			};
 		};
+
+		mpm: interrupt-controller {
+			compatible = "qcom,mpm";
+			qcom,rpm-msg-ram = <&apss_mpm>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apcs_glb 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#power-domain-cells = <0>;
+			interrupt-parent = <&intc>;
+			qcom,mpm-pin-count = <96>;
+			qcom,mpm-pin-map = <2 275>,  /* TSENS0 uplow */
+					   <5 296>,  /* Soundwire master_irq */
+					   <12 422>, /* DWC3 ss_phy_irq */
+					   <24 79>,  /* Soundwire wake_irq */
+					   <86 183>, /* MPM wake, SPMI */
+					   <90 260>; /* QUSB2_PHY DP+DM */
+		};
 	};
 
 	reserved_memory: reserved-memory {
@@ -424,6 +448,7 @@
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 127>;
+			wakeup-parent = <&mpm>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -668,6 +693,33 @@
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,qcm2290-snoc";
+			reg = <0x0 0x01880000 0x0 0x60200>;
+			#interconnect-cells = <2>;
+
+			qup_virt: interconnect-qup {
+				compatible = "qcom,qcm2290-qup-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,qcm2290-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,qcm2290-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,qcm2290-cnoc";
+			reg = <0x0 0x01900000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b44000 {
 			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b44000 0x0 0x3000>;
@@ -680,6 +732,60 @@
 			};
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -692,7 +798,7 @@
 				    "obsrvr",
 				    "intr",
 				    "cnfg";
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "periph_irq";
 			qcom,ee = <0>;
 			qcom,channel = <0>;
@@ -707,8 +813,8 @@
 			reg = <0x0 0x04411000 0x0 0x1ff>,
 			      <0x0 0x04410000 0x0 0x8>;
 			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -720,9 +826,22 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,qcm2290-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -755,13 +874,45 @@
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
 			iommus = <&apps_smmu 0xc0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x000f642c>;
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
 
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -785,6 +936,12 @@
 			power-domains = <&rpmpd QCM2290_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0xa0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -798,11 +955,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -850,6 +1011,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -866,6 +1036,12 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -879,6 +1055,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart0_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -893,6 +1075,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -909,6 +1100,12 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -925,6 +1122,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -941,6 +1147,12 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -957,6 +1169,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -973,6 +1194,12 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -989,6 +1216,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1005,6 +1241,12 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1018,6 +1260,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart4_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1032,6 +1280,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1048,6 +1305,12 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1057,9 +1320,10 @@
 		usb: usb@4ef8800 {
 			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
 			reg = <0x0 0x04ef8800 0x0 0x400>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -1080,6 +1344,13 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			/* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
 			wakeup-source;
 
 			#address-cells = <2>;
@@ -1103,6 +1374,225 @@
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
 			};
+		};
+
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,qcm2290-mdss";
+			reg = <0x0 0x05e00000 0x0 0x1000>;
+			reg-names = "mdss";
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+			interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,qcm2290-dpu";
+				reg = <0x0 0x05e01000 0x0 0x8f000>,
+				      <0x0 0x05eb0000 0x0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x05e94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x0 0x05e94400 0x0 0x100>,
+				      <0x0 0x05e94500 0x0 0x300>,
+				      <0x0 0x05e94800 0x0 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				power-domains = <&rpmpd QCM2290_VDDMX>;
+				required-opps = <&rpmpd_opp_nom>;
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,qcm2290-dispcc";
+			reg = <0x0 0x05f00000 0x0 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk";
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		remoteproc_mpss: remoteproc@6080000 {
diff --git a/src/arm64/qcom/qcm6490-fairphone-fp5.dts b/src/arm64/qcom/qcm6490-fairphone-fp5.dts
index 2de0b8c..176898c 100644
--- a/src/arm64/qcom/qcm6490-fairphone-fp5.dts
+++ b/src/arm64/qcom/qcm6490-fairphone-fp5.dts
@@ -9,6 +9,8 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -75,26 +77,11 @@
 			no-map;
 		};
 
-		adsp_mem: adsp@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
 		cdsp_mem: cdsp@88f00000 {
 			reg = <0x0 0x88f00000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		mpss_mem: mpss@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
-		wpss_mem: wpss@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
-
 		rmtfs_mem: memory@f8500000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0xf8500000 0x0 0x600000>;
@@ -134,6 +121,106 @@
 		enable-active-high;
 		vin-supply = <&vreg_bob>;
 	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -182,8 +269,9 @@
 		};
 
 		vreg_l7b: ldo7 {
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3544000>;
+			/* Constrained for UFS VCC, at least until UFS driver scales voltage */
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -423,6 +511,42 @@
 	memory-region = <&ipa_fw_mem>;
 	firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt";
 	status = "okay";
+};
+
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
 };
 
 &pm7325_gpios {
@@ -448,8 +572,91 @@
 	};
 };
 
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &pmk8350_rtc {
 	status = "okay";
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@145 {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_cam_flash_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+
+	channel@147 {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_wide_rfc_therm";
+	};
 };
 
 &pon_pwrkey {
@@ -489,6 +696,26 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/fairphone5/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/fairphone5/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/fairphone5/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcm6490/fairphone5/wpss.mbn";
+	status = "okay";
+};
+
 &sdc2_clk {
 	drive-strength = <16>;
 	bias-disable;
@@ -632,6 +859,28 @@
 	};
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b>;
+	vcc-max-microamp = <800000>;
+	/*
+	 * Technically l9b enables an eLDO (supplied by s1b) which then powers
+	 * VCCQ2 of the UFS.
+	 */
+	vccq-supply = <&vreg_l9b>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -665,3 +914,8 @@
 
 	status = "okay";
 };
+
+&wifi {
+	qcom,ath11k-calibration-variant = "Fairphone_5";
+	status = "okay";
+};
diff --git a/src/arm64/qcom/qcm6490-idp.dts b/src/arm64/qcom/qcm6490-idp.dts
new file mode 100644
index 0000000..03e97e2
--- /dev/null
+++ b/src/arm64/qcom/qcm6490-idp.dts
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCM6490 IDP";
+	compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <4350000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p952>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};
diff --git a/src/arm64/qcom/qcs404.dtsi b/src/arm64/qcom/qcs404.dtsi
index 2721f32..2f2eeaf 100644
--- a/src/arm64/qcom/qcs404.dtsi
+++ b/src/arm64/qcom/qcs404.dtsi
@@ -558,9 +558,6 @@
 			reg = <0x00400000 0x80000>;
 			compatible = "qcom,qcs404-bimc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				<&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -601,18 +598,12 @@
 			reg = <0x00500000 0x15080>;
 			compatible = "qcom,qcs404-pcnoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-				<&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			reg = <0x00580000 0x23080>;
 			compatible = "qcom,qcs404-snoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				<&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		remoteproc_cdsp: remoteproc@b00000 {
@@ -1461,7 +1452,7 @@
 			};
 		};
 
-		pcie: pci@10000000 {
+		pcie: pcie@10000000 {
 			compatible = "qcom,pcie-qcs404";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
diff --git a/src/arm64/qcom/qcs6490-rb3gen2.dts b/src/arm64/qcom/qcs6490-rb3gen2.dts
new file mode 100644
index 0000000..8bb7d13
--- /dev/null
+++ b/src/arm64/qcom/qcs6490-rb3gen2.dts
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
+	compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <4350000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};
diff --git a/src/arm64/qcom/qdu1000.dtsi b/src/arm64/qcom/qdu1000.dtsi
index 1c0e5d2..832f472 100644
--- a/src/arm64/qcom/qdu1000.dtsi
+++ b/src/arm64/qcom/qdu1000.dtsi
@@ -381,6 +381,20 @@
 			#power-domain-cells = <1>;
 		};
 
+		ecpricc: clock-controller@280000 {
+			compatible = "qcom,qdu1000-ecpricc";
+			reg = <0x0 0x00280000 0x0 0x31c00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		gpi_dma0: dma-controller@900000  {
 			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x900000 0x0 0x60000>;
@@ -1446,13 +1460,10 @@
 		system-cache-controller@19200000 {
 			compatible = "qcom,qdu1000-llcc";
 			reg = <0 0x19200000 0 0xd80000>,
-			      <0 0x1a200000 0 0x80000>,
-			      <0 0x221c8128 0 0x4>;
-			reg-names = "llcc_base",
-				    "llcc_broadcast_base",
-				    "multi_channel_register";
+			      <0 0x1a200000 0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			multi-ch-bit-off = <24 2>;
 		};
 	};
 
diff --git a/src/arm64/qcom/qrb2210-rb1.dts b/src/arm64/qcom/qrb2210-rb1.dts
index 94885b9..aa53b6a 100644
--- a/src/arm64/qcom/qrb2210-rb1.dts
+++ b/src/arm64/qcom/qrb2210-rb1.dts
@@ -23,6 +23,14 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	clocks {
+		clk40M: can-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+			#clock-cells = <0>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -40,6 +48,17 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -158,6 +177,68 @@
 	};
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_hdmi_out_1p2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm2250_l5>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
 &pm2250_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -374,9 +455,36 @@
 	no-sdio;
 	no-mmc;
 	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&clk40M>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
 };
 
 &tlmm {
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio41";
+		function = "gpio";
+		input-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio46";
+		function = "gpio";
+		bias-disable;
+	};
+
 	sd_det_in_on: sd-det-in-on-state {
 		pins = "gpio88";
 		function = "gpio";
@@ -415,6 +523,10 @@
 	status = "okay";
 };
 
+&usb_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_hsphy {
 	vdd-supply = <&pm2250_l12>;
 	vdda-pll-supply = <&pm2250_l13>;
@@ -427,6 +539,7 @@
 	vdd-1.8-xo-supply = <&pm2250_l13>;
 	vdd-1.3-rfa-supply = <&pm2250_l10>;
 	vdd-3.3-ch0-supply = <&pm2250_l22>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB1";
 	status = "okay";
 };
 
diff --git a/src/arm64/qcom/qrb4210-rb2.dts b/src/arm64/qcom/qrb4210-rb2.dts
index a7278a9..7c19f87 100644
--- a/src/arm64/qcom/qrb4210-rb2.dts
+++ b/src/arm64/qcom/qrb4210-rb2.dts
@@ -15,6 +15,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &uart3;
 	};
 
 	chosen {
@@ -280,6 +281,12 @@
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/qrb4210/modem.mbn";
+
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -346,13 +353,14 @@
 		};
 
 		vreg_l8a_0p664: l8 {
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <728000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10a_1p8: l10 {
@@ -389,11 +397,13 @@
 		vreg_l16a_1p3: l16 {
 			regulator-min-microvolt = <1704000>;
 			regulator-max-microvolt = <1904000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1152000>;
 			regulator-max-microvolt = <1384000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l18a_1p232: l18 {
@@ -424,8 +434,9 @@
 		};
 
 		vreg_l23a_3p3: l23 {
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l24a_2p96: l24 {
@@ -487,6 +498,66 @@
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
 
+	uart3_default: uart3-default-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart3_sleep: uart3-sleep-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	lt9611_rst_pin: lt9611-rst-state {
 		pins = "gpio41";
 		function = "gpio";
@@ -508,6 +579,26 @@
 	};
 };
 
+&uart3 {
+	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-0 = <&uart3_default>;
+	pinctrl-1 = <&uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3988-bt";
+
+		vddio-supply = <&vreg_l9a_1p8>;
+		vddxo-supply = <&vreg_l16a_1p3>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l23a_3p3>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		max-speed = <3200000>;
+	};
+};
+
 &uart4 {
 	status = "okay";
 };
@@ -518,7 +609,6 @@
 
 &usb_dwc3 {
 	maximum-speed = "super-speed";
-	dr_mode = "peripheral";
 };
 
 &usb_hsphy {
@@ -536,6 +626,16 @@
 	status = "okay";
 };
 
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
+	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };
diff --git a/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts b/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts
index bb149e5..edc0e42 100644
--- a/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts
+++ b/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -46,7 +46,7 @@
 		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
 		assigned-clock-rates = <24000000>;
 
-		dovdd-supply  = <&vreg_l7f_1p8>;
+		dovdd-supply = <&vreg_l7f_1p8>;
 		avdd-supply = <&vdc_5v>;
 		dvdd-supply = <&vdc_5v>;
 
diff --git a/src/arm64/qcom/qrb5165-rb5.dts b/src/arm64/qcom/qrb5165-rb5.dts
index c8cd40a..cd0db4f 100644
--- a/src/arm64/qcom/qrb5165-rb5.dts
+++ b/src/arm64/qcom/qrb5165-rb5.dts
@@ -23,6 +23,7 @@
 
 	aliases {
 		serial0 = &uart12;
+		serial1 = &uart6;
 		sdhc2 = &sdhc_2;
 	};
 
@@ -64,8 +65,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-wlan {
@@ -1263,6 +1264,14 @@
 		"HST_WLAN_UART_TX",
 		"HST_WLAN_UART_RX";
 
+	bt_en_state: bt-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
 	lt9611_irq_pin: lt9611-irq-state {
 		pins = "gpio63";
 		function = "gpio";
@@ -1296,6 +1305,26 @@
 	};
 };
 
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>;
+
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddpmu-supply = <&vreg_s2f_0p95>;
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddrfa0p9-supply = <&vreg_s2f_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p3>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+	};
+};
+
 &uart12 {
 	status = "okay";
 };
@@ -1425,7 +1454,7 @@
 
 		altmodes {
 			displayport {
-				svid = <0xff01>;
+				svid = /bits/ 16 <0xff01>;
 				vdo = <0x00001c46>;
 			};
 		};
diff --git a/src/arm64/qcom/sa8775p-ride.dts b/src/arm64/qcom/sa8775p-ride.dts
index 9760bb4..26ad05b 100644
--- a/src/arm64/qcom/sa8775p-ride.dts
+++ b/src/arm64/qcom/sa8775p-ride.dts
@@ -461,6 +461,11 @@
 			  "ANALOG_PON_OPT";
 };
 
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
 &pmm8654au_1_gpios {
 	gpio-line-names = "PMIC_C_ID0",
 			  "PMIC_C_ID1",
diff --git a/src/arm64/qcom/sa8775p.dtsi b/src/arm64/qcom/sa8775p.dtsi
index b6a93b1..a7eaca3 100644
--- a/src/arm64/qcom/sa8775p.dtsi
+++ b/src/arm64/qcom/sa8775p.dtsi
@@ -1487,6 +1487,11 @@
 			};
 		};
 
+		rng: rng@10d2000 {
+			compatible = "qcom,sa8775p-trng", "qcom,trng";
+			reg = <0 0x010d2000 0 0x1000>;
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
@@ -1610,8 +1615,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1697,8 +1702,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 7 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1760,8 +1765,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -1910,6 +1915,50 @@
 			interrupt-controller;
 		};
 
+		tsens2: thermal-sensor@c251000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c251000 0x0 0x1ff>,
+			      <0x0 0x0c224000 0x0 0x8>;
+			interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c252000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c252000 0x0 0x1ff>,
+			      <0x0 0x0c225000 0x0 0x8>;
+			interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1ff>,
+			      <0x0 0x0c222000 0x0 0x8>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c265000 0x0 0x1ff>,
+			      <0x0 0x0c223000 0x0 0x8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
@@ -1920,6 +1969,11 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x1100>,
@@ -2181,7 +2235,7 @@
 			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
 			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		memtimer: timer@17c20000 {
@@ -2401,6 +2455,1058 @@
 		};
 	};
 
+	thermal-zones {
+		aoss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	arch_timer: timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
@@ -2409,7 +3515,7 @@
 			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	pcie0: pci@1c00000{
+	pcie0: pcie@1c00000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c00000 0x0 0x3000>,
 		      <0x0 0x40000000 0x0 0xf20>,
@@ -2509,7 +3615,7 @@
 		status = "disabled";
 	};
 
-	pcie1: pci@1c10000{
+	pcie1: pcie@1c10000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c10000 0x0 0x3000>,
 		      <0x0 0x60000000 0x0 0xf20>,
diff --git a/src/arm64/qcom/sc7180-acer-aspire1.dts b/src/arm64/qcom/sc7180-acer-aspire1.dts
index dbb4893..5afcb82 100644
--- a/src/arm64/qcom/sc7180-acer-aspire1.dts
+++ b/src/arm64/qcom/sc7180-acer-aspire1.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sc7180.dtsi"
@@ -129,6 +130,113 @@
 		pinctrl-names = "default";
 	};
 
+	sound: sound {
+		compatible = "qcom,sc7180-qdsp6-sndcard";
+		pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>;
+		pinctrl-names = "default";
+		model = "Acer-Aspire-1";
+
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		multimedia1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		multimedia2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		multimedia3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+
+		multimedia4-dai-link {
+			link-name = "MultiMedia4";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+			};
+		};
+
+		primary-rx-dai-link {
+			link-name = "Primary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		primary-tx-dai-link {
+			link-name = "Primary MI2S Capture";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		tertiary-rx-dai-link {
+			link-name = "Tertiary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+		};
+
+		displayport-rx-dai-link {
+			link-name = "DisplayPort Playback";
+
+			cpu {
+				sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+	};
+
 	reg_tp_3p3: touchpad-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "tp_3p3";
@@ -209,9 +317,22 @@
 		AVDD-supply = <&vreg_l15a_1p8>;
 		MICVDD-supply = <&reg_codec_3p3>;
 		VBAT-supply = <&reg_codec_3p3>;
+		DBVDD-supply = <&vreg_l15a_1p8>;
+		LDO1-IN-supply = <&vreg_l15a_1p8>;
 
-		realtek,dmic1-data-pin = <1>;
-		realtek,dmic1-clk-pin = <1>;
+		/*
+		 * NOTE: The board has a path from this codec to the
+		 * DMIC microphones in the lid, however some of the option
+		 * resistors are absent and the microphones are connected
+		 * to the SoC instead.
+		 *
+		 * If the resistors were to be changed by the user to
+		 * connect the codec, the following could be used:
+		 *
+		 * realtek,dmic1-data-pin = <1>;
+		 * realtek,dmic1-clk-pin = <1>;
+		 */
+
 		realtek,jd-src = <1>;
 	};
 };
@@ -351,6 +472,49 @@
 	status = "disabled";
 };
 
+&pm6150_rtc {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@17 {
+		reg = <PRIMARY_MI2S_TX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@20 {
+		reg = <TERTIARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@104 {
+		reg = <DISPLAY_PORT_RX>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -359,6 +523,12 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc7180/acer/aspire1/qcadsp7180.mbn";
+	status = "okay";
+};
+
 &remoteproc_mpss {
 	firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
 	status = "okay";
diff --git a/src/arm64/qcom/sc7180-trogdor-pompom.dtsi b/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
index 0be6233..067813f 100644
--- a/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
+++ b/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
@@ -141,7 +141,7 @@
 };
 
 &panel {
-	compatible = "kingdisplay,kd116n21-30nv-a010";
+	compatible = "edp-panel";
 };
 
 &pen_insert {
diff --git a/src/arm64/qcom/sc7180.dtsi b/src/arm64/qcom/sc7180.dtsi
index 11f353d..4dcaa15 100644
--- a/src/arm64/qcom/sc7180.dtsi
+++ b/src/arm64/qcom/sc7180.dtsi
@@ -2966,8 +2966,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3100,8 +3100,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x800 0x2>;
 
@@ -3576,7 +3580,7 @@
 			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/src/arm64/qcom/sc7280-chrome-common.dtsi b/src/arm64/qcom/sc7280-chrome-common.dtsi
index 5d462ae..c4d00a8 100644
--- a/src/arm64/qcom/sc7280-chrome-common.dtsi
+++ b/src/arm64/qcom/sc7280-chrome-common.dtsi
@@ -17,6 +17,9 @@
  * required by the setup for Chrome boards.
  */
 
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_zap_mem;
+/delete-node/ &gpu_zap_shader;
 /delete-node/ &hyp_mem;
 /delete-node/ &xbl_mem;
 /delete-node/ &reserved_xbl_uefi_log;
@@ -24,11 +27,6 @@
 
 / {
 	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
 		camera_mem: memory@8ad00000 {
 			reg = <0x0 0x8ad00000 0x0 0x500000>;
 			no-map;
@@ -38,11 +36,6 @@
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
-
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
 	};
 };
 
@@ -94,9 +87,31 @@
 	};
 };
 
+/* Currently not used */
+&remoteproc_cdsp {
+	/delete-property/ memory-region;
+};
+
 &remoteproc_wpss {
-	status = "okay";
+	compatible = "qcom,sc7280-wpss-pil";
+	clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+		 <&gcc GCC_WPSS_AHB_CLK>,
+		 <&gcc GCC_WPSS_RSCP_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "ahb_bdg",
+		      "ahb",
+		      "rscp",
+		      "xo";
+
+	resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+		 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+	reset-names = "restart", "pdc_sync";
+
+	qcom,halt-regs = <&tcsr_1 0x17000>;
+
 	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+
+	status = "okay";
 };
 
 &scm {
diff --git a/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi b/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi
index 9550554..b721a85 100644
--- a/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -8,11 +8,6 @@
 
 / {
 	reserved-memory {
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
 		mba_mem: memory@9c700000 {
 			reg = <0x0 0x9c700000 0x0 0x200000>;
 			no-map;
@@ -33,6 +28,8 @@
 
 &remoteproc_mpss {
 	compatible = "qcom,sc7280-mss-pil";
+	reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
 
 	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
 		 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
diff --git a/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi b/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi
index 2febd61..3ebc915 100644
--- a/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi
+++ b/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi
@@ -7,5 +7,6 @@
 
 /* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
 
+/delete-node/ &mpss_mem;
 /delete-node/ &remoteproc_mpss;
 /delete-node/ &rmtfs_mem;
diff --git a/src/arm64/qcom/sc7280-idp.dtsi b/src/arm64/qcom/sc7280-idp.dtsi
index 2ff549f..a005952 100644
--- a/src/arm64/qcom/sc7280-idp.dtsi
+++ b/src/arm64/qcom/sc7280-idp.dtsi
@@ -499,6 +499,25 @@
 	status = "okay";
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
diff --git a/src/arm64/qcom/sc7280.dtsi b/src/arm64/qcom/sc7280.dtsi
index 66f1eb8..83b5b76 100644
--- a/src/arm64/qcom/sc7280.dtsi
+++ b/src/arm64/qcom/sc7280.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -91,68 +92,93 @@
 		#size-cells = <2>;
 		ranges;
 
-		wlan_ce_mem: memory@4cd000 {
+		wlan_ce_mem: wlan-ce@4cd000 {
 			no-map;
 			reg = <0x0 0x004cd000 0x0 0x1000>;
 		};
 
-		hyp_mem: memory@80000000 {
+		hyp_mem: hyp@80000000 {
 			reg = <0x0 0x80000000 0x0 0x600000>;
 			no-map;
 		};
 
-		xbl_mem: memory@80600000 {
+		xbl_mem: xbl@80600000 {
 			reg = <0x0 0x80600000 0x0 0x200000>;
 			no-map;
 		};
 
-		aop_mem: memory@80800000 {
+		aop_mem: aop@80800000 {
 			reg = <0x0 0x80800000 0x0 0x60000>;
 			no-map;
 		};
 
-		aop_cmd_db_mem: memory@80860000 {
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
 			reg = <0x0 0x80860000 0x0 0x20000>;
 			compatible = "qcom,cmd-db";
 			no-map;
 		};
 
-		reserved_xbl_uefi_log: memory@80880000 {
+		reserved_xbl_uefi_log: xbl-uefi-res@80880000 {
 			reg = <0x0 0x80884000 0x0 0x10000>;
 			no-map;
 		};
 
-		sec_apps_mem: memory@808ff000 {
+		sec_apps_mem: sec-apps@808ff000 {
 			reg = <0x0 0x808ff000 0x0 0x1000>;
 			no-map;
 		};
 
-		smem_mem: memory@80900000 {
+		smem_mem: smem@80900000 {
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
 
-		cpucp_mem: memory@80b00000 {
+		cpucp_mem: cpucp@80b00000 {
 			no-map;
 			reg = <0x0 0x80b00000 0x0 0x100000>;
 		};
 
-		wlan_fw_mem: memory@80c00000 {
+		wlan_fw_mem: wlan-fw@80c00000 {
 			reg = <0x0 0x80c00000 0x0 0xc00000>;
 			no-map;
 		};
 
-		video_mem: memory@8b200000 {
+		adsp_mem: adsp@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: video@8b200000 {
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
 
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
-		ipa_fw_mem: memory@8b700000 {
+		ipa_fw_mem: ipa-fw@8b700000 {
 			reg = <0 0x8b700000 0 0x10000>;
 			no-map;
 		};
 
+		gpu_zap_mem: zap@8b71a000 {
+			reg = <0 0x8b71a000 0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
-		rmtfs_mem: memory@9c900000 {
+		rmtfs_mem: rmtfs@9c900000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0x9c900000 0x0 0x280000>;
 			no-map;
@@ -906,7 +932,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_phy>,
-				 <0>, <0>, <0>,
+				 <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
@@ -974,6 +1000,7 @@
 
 			bus-width = <8>;
 			supports-cqe;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -2034,6 +2061,11 @@
 			};
 		};
 
+		rng: rng@10d3000 {
+			compatible = "qcom,sc7280-trng", "qcom,trng";
+			reg = <0 0x010d3000 0 0x1000>;
+		};
+
 		cnoc2: interconnect@1500000 {
 			reg = <0 0x01500000 0 0x1000>;
 			compatible = "qcom,sc7280-cnoc2";
@@ -2126,7 +2158,7 @@
 			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sc7280";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2233,6 +2265,99 @@
 			status = "disabled";
 		};
 
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sc7280-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc7280-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CLKREF_EN>;
+			clock-names = "ref", "ref_aux", "qref";
+
+			power-domains = <&rpmhpd SC7280_MX>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e6 0x0011>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e4 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sc7280-ipa";
 
@@ -2598,7 +2723,8 @@
 				    "cx_mem",
 				    "cx_dbgc";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&adreno_smmu 0 0x401>;
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
@@ -2608,6 +2734,10 @@
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_zap_mem>;
+			};
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2615,14 +2745,14 @@
 					opp-hz = /bits/ 64 <315000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <1804000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <4068000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				/* Only applicable for SKUs which has 550Mhz as Fmax */
@@ -2637,28 +2767,28 @@
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <6832000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-608000000 {
 					opp-hz = /bits/ 64 <608000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <8368000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-700000000 {
 					opp-hz = /bits/ 64 <700000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-812000000 {
 					opp-hz = /bits/ 64 <812000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-840000000 {
@@ -2772,12 +2902,12 @@
 					"gpu_cc_hub_aon_clk";
 
 			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sc7280-mpss-pas";
-			reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
+			reg = <0 0x04080000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3329,6 +3459,7 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 
 			bus-width = <4>;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 
@@ -3399,6 +3530,32 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_2: usb@8cf8800 {
@@ -3426,8 +3583,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 13 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -3479,8 +3636,77 @@
 			status = "disabled";
 		};
 
+		remoteproc_adsp: remoteproc@3700000 {
+			compatible = "qcom,sc7280-adsp-pas";
+			reg = <0 0x03700000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_LCX>,
+					<&rpmhpd SC7280_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		remoteproc_wpss: remoteproc@8a00000 {
-			compatible = "qcom,sc7280-wpss-pil";
+			compatible = "qcom,sc7280-wpss-pas";
 			reg = <0 0x08a00000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
@@ -3492,12 +3718,8 @@
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
-				 <&gcc GCC_WPSS_AHB_CLK>,
-				 <&gcc GCC_WPSS_RSCP_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ahb_bdg", "ahb",
-				      "rscp", "xo";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
 
 			power-domains = <&rpmhpd SC7280_CX>,
 					<&rpmhpd SC7280_MX>;
@@ -3510,11 +3732,6 @@
 			qcom,smem-states = <&wpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
-				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
-			reset-names = "restart", "pdc_sync";
-
-			qcom,halt-regs = <&tcsr_1 0x17000>;
 
 			status = "disabled";
 
@@ -3656,6 +3873,144 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		remoteproc_cdsp: remoteproc@a300000 {
+			compatible = "qcom,sc7280-cdsp-pas";
+			reg = <0 0x0a300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MX>;
+			power-domain-names = "cx", "mx";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x11a1 0x0420>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x11a2 0x0420>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x11a3 0x0420>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x11a4 0x0420>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x11a5 0x0420>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x11a6 0x0420>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x11a7 0x0420>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x11a8 0x0420>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x11ab 0x0420>,
+							 <&apps_smmu 0x118b 0x0420>;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x11ac 0x0420>,
+							 <&apps_smmu 0x118c 0x0420>;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x11ad 0x0420>,
+							 <&apps_smmu 0x118d 0x0420>;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x11ae 0x0420>,
+							 <&apps_smmu 0x118e 0x0420>;
+					};
+				};
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -3681,9 +4036,9 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3793,6 +4148,86 @@
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -3847,8 +4282,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x900 0x402>;
 
@@ -4298,6 +4737,62 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";
@@ -5222,7 +5717,7 @@
 			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 			status = "reserved"; /* Owned by Gunyah hyp */
 		};
 
diff --git a/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts b/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
index 3ea07d0..0c22f3e 100644
--- a/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
@@ -452,8 +452,8 @@
 };
 
 &pcie3 {
-	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>;
 	pinctrl-0 = <&pcie3_default_state>;
 	pinctrl-names = "default";
 
diff --git a/src/arm64/qcom/sc8180x-primus.dts b/src/arm64/qcom/sc8180x-primus.dts
index fd2fab4..bfee60c 100644
--- a/src/arm64/qcom/sc8180x-primus.dts
+++ b/src/arm64/qcom/sc8180x-primus.dts
@@ -43,7 +43,7 @@
 		pinctrl-0 = <&hall_int_active_state>;
 
 		lid-switch {
-			gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
 			wakeup-source;
@@ -386,12 +386,18 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l12e: ldo12 {
@@ -531,8 +537,8 @@
 };
 
 &pcie1 {
-	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_default_state>;
 
diff --git a/src/arm64/qcom/sc8180x.dtsi b/src/arm64/qcom/sc8180x.dtsi
index a34f438..0430d99 100644
--- a/src/arm64/qcom/sc8180x.dtsi
+++ b/src/arm64/qcom/sc8180x.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8180x.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1684,7 +1685,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1736,7 +1737,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1751,6 +1751,7 @@
 
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1761,7 +1762,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1781,7 +1782,7 @@
 			status = "disabled";
 		};
 
-		pcie3: pci@1c08000 {
+		pcie3: pcie@1c08000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1833,7 +1834,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
@@ -1848,6 +1848,7 @@
 
 			phys = <&pcie3_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1858,7 +1859,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_3_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1879,7 +1880,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c10000 {
+		pcie1: pcie@1c10000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x68000000 0 0xf1d>,
@@ -1931,7 +1932,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1c80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
@@ -1946,6 +1946,7 @@
 
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1977,7 +1978,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c18000 {
+		pcie2: pcie@1c18000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c18000 0 0x3000>,
 			      <0 0x70000000 0 0xf1d>,
@@ -2029,7 +2030,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
 				    <0x100 &apps_smmu 0x1d01 0x1>;
 
@@ -2044,6 +2044,7 @@
 
 			phys = <&pcie2_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -2062,7 +2063,7 @@
 				      "refgen",
 				      "pipe";
 			#clock-cells = <0>;
-			clock-output-names = "pcie_3_pipe_clk";
+			clock-output-names = "pcie_2_pipe_clk";
 
 			#phy-cells = <0>;
 
@@ -2114,6 +2115,14 @@
 					<0 0>,
 					<0 0>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
 			status = "disabled";
 		};
 
@@ -2548,10 +2557,10 @@
 		usb_prim: usb@a6f8800 {
 			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
@@ -2622,10 +2631,10 @@
 				      "xo";
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -2704,11 +2713,15 @@
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&gcc GCC_DISP_HF_AXI_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
-					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
 				clock-names = "iface",
 					      "bus",
 					      "core",
-					      "vsync";
+					      "vsync",
+					      "rot",
+					      "lut";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
@@ -3117,8 +3130,6 @@
 				phys = <&edp_phy>;
 				phy-names = "dp";
 
-				#sound-dai-cells = <0>;
-
 				operating-points-v2 = <&edp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
 
@@ -3418,10 +3429,12 @@
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
 		};
 
 		apss_shared: mailbox@17c00000 {
-			compatible = "qcom,sc8180x-apss-shared";
+			compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared";
 			reg = <0x0 0x17c00000 0x0 0x1000>;
 			#mbox-cells = <1>;
 		};
diff --git a/src/arm64/qcom/sc8280xp-crd.dts b/src/arm64/qcom/sc8280xp-crd.dts
index e4861c6..4121556 100644
--- a/src/arm64/qcom/sc8280xp-crd.dts
+++ b/src/arm64/qcom/sc8280xp-crd.dts
@@ -458,6 +458,8 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -561,6 +563,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
diff --git a/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 38edaf5..eb657e5 100644
--- a/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -82,6 +82,9 @@
 	leds {
 		compatible = "gpio-leds";
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
 		led-camera-indicator {
 			label = "white:camera-indicator";
 			function = LED_FUNCTION_INDICATOR;
@@ -570,6 +573,7 @@
 
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
+	/delete-property/ #sound-dai-cells;
 
 	data-lanes = <0 1 2 3>;
 
@@ -601,6 +605,7 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -717,6 +722,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
@@ -1277,6 +1284,13 @@
 		};
 	};
 
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";
diff --git a/src/arm64/qcom/sc8280xp.dtsi b/src/arm64/qcom/sc8280xp.dtsi
index cad59af..febf283 100644
--- a/src/arm64/qcom/sc8280xp.dtsi
+++ b/src/arm64/qcom/sc8280xp.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -2731,7 +2732,7 @@
 			status = "disabled";
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2807,7 +2808,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.6.0";
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2844,7 +2845,7 @@
 			#reset-cells = <1>;
 		};
 
-		swr2: soundwire-controller@3330000 {
+		swr2: soundwire@3330000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03330000 0 0x2000>;
 			interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
@@ -3450,6 +3451,20 @@
 			};
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc8280xp-camcc";
+			reg = <0 0x0ad00000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss0: display-subsystem@ae00000 {
 			compatible = "qcom,sc8280xp-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -4030,6 +4045,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -4225,7 +4241,7 @@
 			compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/src/arm64/qcom/sdm630.dtsi b/src/arm64/qcom/sdm630.dtsi
index 775700f..513fe5e 100644
--- a/src/arm64/qcom/sdm630.dtsi
+++ b/src/arm64/qcom/sdm630.dtsi
@@ -606,9 +606,6 @@
 			compatible = "qcom,sdm660-bimc";
 			reg = <0x01008000 0x78000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		restart@10ac000 {
@@ -620,28 +617,17 @@
 			compatible = "qcom,sdm660-cnoc";
 			reg = <0x01500000 0x10000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@1626000 {
 			compatible = "qcom,sdm660-snoc";
 			reg = <0x01626000 0x7090>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		anoc2_smmu: iommu@16c0000 {
 			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
 			reg = <0x016c0000 0x40000>;
-
-			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <1000>;
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "bus";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -686,16 +672,12 @@
 			compatible = "qcom,sdm660-a2noc";
 			reg = <0x01704000 0xc100>;
 			#interconnect-cells = <1>;
-			clock-names = "bus",
-				      "bus_a",
-				      "ipa",
+			clock-names = "ipa",
 				      "ufs_axi",
 				      "aggre2_ufs_axi",
 				      "aggre2_usb3_axi",
 				      "cfg_noc_usb2_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&rpmcc RPM_SMD_IPA_CLK>,
+			clocks = <&rpmcc RPM_SMD_IPA_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -706,10 +688,8 @@
 			compatible = "qcom,sdm660-mnoc";
 			reg = <0x01745000 0xa010>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		tsens: thermal-sensor@10ae000 {
@@ -1186,7 +1166,9 @@
 			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
 				 <&gcc GCC_BIMC_GFX_CLK>,
 				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
-			clock-names = "iface", "mem", "mem_iface";
+			clock-names = "iface",
+			              "mem",
+				      "mem_iface";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -1288,20 +1270,16 @@
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc",
 				      "core",
 				      "iface",
 				      "sleep",
-				      "mock_utmi",
-				      "bus";
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>,
-					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>,
-					       <19200000>;
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
 
 			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
@@ -2204,10 +2182,9 @@
 
 			clocks = <&mmcc MNOC_AHB_CLK>,
 				 <&mmcc BIMC_SMMU_AHB_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
 				 <&mmcc BIMC_SMMU_AXI_CLK>;
 			clock-names = "iface-mm", "iface-smmu",
-				      "bus-mm", "bus-smmu";
+				      "bus-smmu";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -2324,12 +2301,6 @@
 			compatible = "qcom,sdm660-gnoc";
 			reg = <0x17900000 0xe000>;
 			#interconnect-cells = <1>;
-			/*
-			 * This one apparently features no clocks,
-			 * so let's not mess with the driver needlessly
-			 */
-			clock-names = "bus", "bus_a";
-			clocks = <&xo_board>, <&xo_board>;
 		};
 
 		apcs_glb: mailbox@17911000 {
diff --git a/src/arm64/qcom/sdm632-fairphone-fp3.dts b/src/arm64/qcom/sdm632-fairphone-fp3.dts
index 301eca9..057579a 100644
--- a/src/arm64/qcom/sdm632-fairphone-fp3.dts
+++ b/src/arm64/qcom/sdm632-fairphone-fp3.dts
@@ -80,6 +80,10 @@
 	};
 };
 
+&lpass {
+	status = "okay";
+};
+
 &pm8953_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -239,3 +243,18 @@
 &usb3_dwc3 {
 	dr_mode = "peripheral";
 };
+
+&wcnss {
+	status = "okay";
+
+	vddpx-supply = <&pm8953_l5>;
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3680";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};
diff --git a/src/arm64/qcom/sdm670.dtsi b/src/arm64/qcom/sdm670.dtsi
index ba2043d..4d7b77a 100644
--- a/src/arm64/qcom/sdm670.dtsi
+++ b/src/arm64/qcom/sdm670.dtsi
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -400,6 +401,30 @@
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1295,10 +1320,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -1353,6 +1378,273 @@
 			#interrupt-cells = <4>;
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm670-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+				 <&apps_smmu 0xc80 0x8>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm670-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
@@ -1532,7 +1824,7 @@
 		};
 
 		cpufreq_hw: cpufreq@17d43000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sdm670-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
diff --git a/src/arm64/qcom/sdm845-db845c.dts b/src/arm64/qcom/sdm845-db845c.dts
index c7eba6c..ab62204 100644
--- a/src/arm64/qcom/sdm845-db845c.dts
+++ b/src/arm64/qcom/sdm845-db845c.dts
@@ -67,8 +67,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-1 {
@@ -1130,7 +1130,7 @@
 	vdd-rx-supply = <&vreg_s4a_1p8>;
 	vdd-io-supply = <&vreg_s4a_1p8>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,1 {
 			compatible = "sdw10217201000";
 			reg = <0 1>;
diff --git a/src/arm64/qcom/sdm845-oneplus-common.dtsi b/src/arm64/qcom/sdm845-oneplus-common.dtsi
index b523b5f..e821103 100644
--- a/src/arm64/qcom/sdm845-oneplus-common.dtsi
+++ b/src/arm64/qcom/sdm845-oneplus-common.dtsi
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
@@ -484,6 +485,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &q6afedai {
 	qi2s@22 {
 		reg = <22>;
diff --git a/src/arm64/qcom/sdm845-wcd9340.dtsi b/src/arm64/qcom/sdm845-wcd9340.dtsi
index c15d488..6172cd1 100644
--- a/src/arm64/qcom/sdm845-wcd9340.dtsi
+++ b/src/arm64/qcom/sdm845-wcd9340.dtsi
@@ -54,7 +54,7 @@
 				reg = <0x42 0x2>;
 			};
 
-			swm: swm@c85 {
+			swm: soundwire@c85 {
 				compatible = "qcom,soundwire-v1.3.0";
 				reg = <0xc85 0x40>;
 				interrupts-extended = <&wcd9340 20>;
diff --git a/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi b/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 93b1582..617b17b 100644
--- a/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -355,6 +355,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &pm8998_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
diff --git a/src/arm64/qcom/sdm845.dtsi b/src/arm64/qcom/sdm845.dtsi
index bf5e6eb..c224482 100644
--- a/src/arm64/qcom/sdm845.dtsi
+++ b/src/arm64/qcom/sdm845.dtsi
@@ -2306,7 +2306,7 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c00000 0 0x2000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2405,7 +2405,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c08000 0 0x2000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2565,7 +2565,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
@@ -2595,30 +2595,50 @@
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sdm845-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2626,16 +2646,9 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -3545,11 +3558,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					etf_in: endpoint {
 						remote-endpoint =
 						  <&merge_funnel_out>;
@@ -4000,33 +4010,28 @@
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4053,10 +4058,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4104,10 +4109,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4126,7 +4131,7 @@
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -5088,7 +5093,7 @@
 			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
 			reg = <0 0x17980000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		apss_shared: mailbox@17990000 {
diff --git a/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts b/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
index 92a812b..47dc42f 100644
--- a/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
@@ -392,6 +392,8 @@
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+
+		wakeup-source;
 	};
 };
 
@@ -408,6 +410,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -482,6 +486,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c11_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -797,7 +803,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
diff --git a/src/arm64/qcom/sdm850-samsung-w737.dts b/src/arm64/qcom/sdm850-samsung-w737.dts
index 5438373..2621783 100644
--- a/src/arm64/qcom/sdm850-samsung-w737.dts
+++ b/src/arm64/qcom/sdm850-samsung-w737.dts
@@ -658,7 +658,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
diff --git a/src/arm64/qcom/sdx75-idp.dts b/src/arm64/qcom/sdx75-idp.dts
index a14e065..f76e72f 100644
--- a/src/arm64/qcom/sdx75-idp.dts
+++ b/src/arm64/qcom/sdx75-idp.dts
@@ -250,6 +250,11 @@
 	stdout-path = "serial0:115200n8";
 };
 
+&pm7550ba_eusb2_repeater {
+	vdd18-supply = <&vreg_l5b_1p776>;
+	vdd3-supply = <&vreg_l10b_3p08>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -261,3 +266,27 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4b_0p88>;
+	vdda12-supply = <&vreg_l1b_1p2>;
+
+	phys = <&pm7550ba_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+
+	status = "okay";
+};
diff --git a/src/arm64/qcom/sdx75.dtsi b/src/arm64/qcom/sdx75.dtsi
index e180aa4..7dbdf8c 100644
--- a/src/arm64/qcom/sdx75.dtsi
+++ b/src/arm64/qcom/sdx75.dtsi
@@ -8,6 +8,8 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sdx75.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -203,6 +205,19 @@
 		};
 	};
 
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sdx75-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		clocks = <&rpmhcc RPMH_QPIC_CLK>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sdx75-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x0>;
@@ -434,6 +449,9 @@
 			clock-names = "m-ahb",
 				      "s-ahb";
 			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -444,6 +462,12 @@
 				reg = <0x0 0x00984000 0x0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-0 = <&qupv3_se1_2uart_active>;
 				pinctrl-1 = <&qupv3_se1_2uart_sleep>;
@@ -453,12 +477,144 @@
 			};
 		};
 
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x00ff4000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx75-qmp-usb3-uni-phy";
+			reg = <0x0 0x00ff6000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB2_CLKREF_EN>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		system_noc: interconnect@1640000 {
+			compatible = "qcom,sdx75-system-noc";
+			reg = <0x0 0x01640000 0x0 0x4b400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@16c0000 {
+			compatible = "qcom,sdx75-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0x14200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 			#hwlock-cells = <1>;
 		};
 
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 10 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			status = "disabled";
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x80 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>,
+				       <&usb_qmpphy>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sdx75-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>,
@@ -733,6 +889,20 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
+
+		dc_noc: interconnect@190e0000 {
+			compatible = "qcom,sdx75-dc-noc";
+			reg = <0x0 0x190e0000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sdx75-gem-noc";
+			reg = <0x0 0x19100000 0x0 0x34080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
 	};
 
 	timer {
diff --git a/src/arm64/qcom/sm4450-qrd.dts b/src/arm64/qcom/sm4450-qrd.dts
index 00a1c81..866e937 100644
--- a/src/arm64/qcom/sm4450-qrd.dts
+++ b/src/arm64/qcom/sm4450-qrd.dts
@@ -10,9 +10,23 @@
 	model = "Qualcomm Technologies, Inc. SM4450 QRD";
 	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
 
-	aliases { };
+	aliases {
+		serial0 = &uart7;
+	};
 
 	chosen {
-		bootargs = "console=hvc0";
+		stdout-path = "serial0:115200n8";
 	};
 };
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>; /* NFC eSE SPI */
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/src/arm64/qcom/sm4450.dtsi b/src/arm64/qcom/sm4450.dtsi
index c4e5b33..3e7ae3b 100644
--- a/src/arm64/qcom/sm4450.dtsi
+++ b/src/arm64/qcom/sm4450.dtsi
@@ -3,8 +3,11 @@
  * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-gcc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -328,6 +331,18 @@
 		};
 	};
 
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -335,6 +350,43 @@
 		dma-ranges = <0 0 0 0 0x10 0>;
 		compatible = "simple-bus";
 
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm4450-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart7: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -351,6 +403,32 @@
 			interrupt-controller;
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm4450-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 137>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio23";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio22";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		intc: interrupt-controller@17200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
@@ -419,6 +497,35 @@
 				status = "disabled";
 			};
 		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm4450-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board>;
+				clock-names = "xo";
+			};
+		};
+
 	};
 
 	timer {
diff --git a/src/arm64/qcom/sm6115.dtsi b/src/arm64/qcom/sm6115.dtsi
index 839c603..f9849b8 100644
--- a/src/arm64/qcom/sm6115.dtsi
+++ b/src/arm64/qcom/sm6115.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
+#include <dt-bindings/interconnect/qcom,sm6115.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
@@ -264,6 +266,8 @@
 		scm: scm {
 			compatible = "qcom,scm-sm6115", "qcom,scm";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -273,6 +277,25 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -859,6 +882,43 @@
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,sm6115-snoc";
+			reg = <0x0 0x01880000 0x0 0x5f080>;
+			clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&rpmcc RPM_SMD_IPA_CLK>;
+			clock-names = "cpu_axi",
+				      "ufs_axi",
+				      "usb_axi",
+				      "ipa";
+			#interconnect-cells = <2>;
+
+			clk_virt: interconnect-clk {
+				compatible = "qcom,sm6115-clk-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,sm6115-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,sm6115-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,sm6115-cnoc";
+			reg = <0x0 0x01900000 0x0 0x6200>;
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>;
+			clock-names = "usb_axi";
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b40000 0x0 0x7000>;
@@ -883,6 +943,60 @@
 			clock-names = "core";
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,sm6115-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -912,6 +1026,12 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,sm6115-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
@@ -939,8 +1059,42 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			bus-width = <8>;
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -961,6 +1115,12 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0x00a0 0x0>;
 			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			bus-width = <4>;
 			qcom,dll-config = <0x0007642c>;
@@ -973,11 +1133,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -987,7 +1151,7 @@
 			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
@@ -1028,24 +1192,17 @@
 
 		ufs_mem_phy: phy@4807000 {
 			compatible = "qcom,sm6115-qmp-ufs-phy";
-			reg = <0x0 0x04807000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x04807000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref", "ref_aux";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@4807400 {
-				reg = <0x0 0x04807400 0x0 0x098>,
-				      <0x0 0x04807600 0x0 0x130>,
-				      <0x0 0x04807c00 0x0 0x16c>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		gpi_dma0: dma-controller@4a00000 {
@@ -1091,6 +1248,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1107,6 +1273,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1123,6 +1298,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1139,6 +1323,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1155,6 +1348,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1171,6 +1373,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1187,6 +1398,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1203,11 +1423,37 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;
@@ -1219,6 +1465,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1235,6 +1490,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1246,6 +1510,12 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1260,6 +1530,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1276,6 +1555,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1307,6 +1595,14 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			 /* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
@@ -1478,6 +1774,13 @@
 			iommus = <&apps_smmu 0x420 0x2>,
 				 <&apps_smmu 0x421 0x0>;
 
+			interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -2566,54 +2869,54 @@
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0 0x0f120000 0x0 0x1000>;
 			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x0 0x20000000>;
 			clock-frequency = <19200000>;
 
 			frame@f121000 {
-				reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
+				reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>;
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			frame@f123000 {
-				reg = <0x0 0x0f123000 0x0 0x1000>;
+				reg = <0x0 0x0f123000 0x1000>;
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f124000 {
-				reg = <0x0 0x0f124000 0x0 0x1000>;
+				reg = <0x0 0x0f124000 0x1000>;
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f125000 {
-				reg = <0x0 0x0f125000 0x0 0x1000>;
+				reg = <0x0 0x0f125000 0x1000>;
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f126000 {
-				reg = <0x0 0x0f126000 0x0 0x1000>;
+				reg = <0x0 0x0f126000 0x1000>;
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f127000 {
-				reg = <0x0 0x0f127000 0x0 0x1000>;
+				reg = <0x0 0x0f127000 0x1000>;
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f128000 {
-				reg = <0x0 0x0f128000 0x0 0x1000>;
+				reg = <0x0 0x0f128000 0x1000>;
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
diff --git a/src/arm64/qcom/sm6125.dtsi b/src/arm64/qcom/sm6125.dtsi
index eb07eca..1dd3a40 100644
--- a/src/arm64/qcom/sm6125.dtsi
+++ b/src/arm64/qcom/sm6125.dtsi
@@ -1185,6 +1185,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <66666667>;
 
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
diff --git a/src/arm64/qcom/sm6350.dtsi b/src/arm64/qcom/sm6350.dtsi
index 8fd6f4d..43cffe8 100644
--- a/src/arm64/qcom/sm6350.dtsi
+++ b/src/arm64/qcom/sm6350.dtsi
@@ -1142,7 +1142,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1187,10 +1187,7 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm6350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
 
 			clock-names = "ref",
 				      "ref_aux";
@@ -1200,16 +1197,9 @@
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
-			status = "disabled";
+			#phy-cells = <0>;
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x128>,
-				      <0 0x01d87600 0 0x1fc>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x128>,
-				      <0 0x01d87a00 0 0x1fc>;
-				#phy-cells = <0>;
-			};
+			status = "disabled";
 		};
 
 		ipa: ipa@1e40000 {
@@ -2524,7 +2514,7 @@
 			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts b/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
index b2f1bb1..cca2c2e 100644
--- a/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -80,6 +80,15 @@
 		};
 	};
 
+	touch_avdd: touch-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_avdd";
+		gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_avdd_default>;
+		enable-active-high;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -136,9 +145,10 @@
 		interrupts = <22 0x2008>;
 
 		vdd-supply = <&pm6125_l13>;
+		avdd-supply = <&touch_avdd>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+		pinctrl-0 = <&ts_int_default>;
 	};
 };
 
@@ -187,6 +197,11 @@
 	status = "okay";
 };
 
+&remoteproc_mss {
+	firmware-name = "qcom/sm6375/Sony/murray/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -238,8 +253,8 @@
 		};
 
 		pm6125_l7: l7 {
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <1050000>;
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
 		};
 
 		pm6125_l8: l8 {
@@ -306,7 +321,7 @@
 
 		pm6125_l21: l21 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l22: l22 {
@@ -317,7 +332,7 @@
 
 		pm6125_l23: l23 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l24: l24 {
@@ -340,8 +355,8 @@
 		};
 
 		pmr735a_l2: l2 {
-			regulator-min-microvolt = <352000>;
-			regulator-max-microvolt = <796000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		pmr735a_l3: l3 {
@@ -412,7 +427,7 @@
 		pins = "gpio59";
 		function = "gpio";
 		drive-strength = <8>;
-		output-high;
+		output-low;
 	};
 };
 
@@ -425,6 +440,18 @@
 };
 
 &usb_1_hsphy {
+	vdda-pll-supply = <&pm6125_l7>;
+	vdda18-supply = <&pm6125_l10>;
+	vdda33-supply = <&pmr735a_l7>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pmr735a_l2>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l2>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	vdd-3.3-ch1-supply = <&pm6125_l21>;
 	status = "okay";
 };
 
diff --git a/src/arm64/qcom/sm6375.dtsi b/src/arm64/qcom/sm6375.dtsi
index e7ff554..7ac8bf2 100644
--- a/src/arm64/qcom/sm6375.dtsi
+++ b/src/arm64/qcom/sm6375.dtsi
@@ -311,6 +311,25 @@
 		};
 	};
 
+	mpm: interrupt-controller {
+		compatible = "qcom,mpm";
+		qcom,rpm-msg-ram = <&apss_mpm>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#power-domain-cells = <0>;
+		interrupt-parent = <&intc>;
+		qcom,mpm-pin-count = <96>;
+		qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
+				   <12 422>, /* DWC3 ss_phy_irq */
+				   <86 183>, /* MPM wake, SPMI */
+				   <89 314>, /* TSENS0 0C */
+				   <90 315>, /* TSENS1 0C */
+				   <93 164>, /* DWC3 dm_hs_phy_irq */
+				   <94 165>; /* DWC3 dp_hs_phy_irq */
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -486,6 +505,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP_0>;
 		};
 	};
@@ -808,7 +828,7 @@
 			reg = <0 0x00500000 0 0x800000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&tlmm 0 0 157>;
-			/* TODO: Hook up MPM as wakeup-parent when it's there */
+			wakeup-parent = <&mpm>;
 			interrupt-controller;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -896,6 +916,36 @@
 				drive-strength = <6>;
 				bias-disable;
 			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				cts-pins {
+					pins = "gpio61";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				rts-pins {
+					pins = "gpio62";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				tx-pins {
+					pins = "gpio63";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio64";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1400000 {
@@ -930,7 +980,7 @@
 			      <0 0x01c0a000 0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -962,8 +1012,15 @@
 		};
 
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0 0x045f0000 0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -1111,6 +1168,19 @@
 				status = "disabled";
 			};
 
+			uart1: serial@4a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 			i2c2: i2c@4a88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a88000 0x0 0x4000>;
@@ -1360,10 +1430,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133333333>;
 
-			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
+					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
diff --git a/src/arm64/qcom/sm8150-hdk.dts b/src/arm64/qcom/sm8150-hdk.dts
index bb161b5..de670b4 100644
--- a/src/arm64/qcom/sm8150-hdk.dts
+++ b/src/arm64/qcom/sm8150-hdk.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8150.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -54,6 +55,17 @@
 			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -127,8 +139,6 @@
 		vdda_sp_sensor:
 		vdda_ufs_2ln_core_1:
 		vdda_ufs_2ln_core_2:
-		vdda_usb_ss_dp_core_1:
-		vdda_usb_ss_dp_core_2:
 		vdda_qlink_lv:
 		vdda_qlink_lv_ck:
 		vreg_l5a_0p875: ldo5 {
@@ -210,6 +220,12 @@
 			regulator-max-microvolt = <3008000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	regulators-1 {
@@ -359,15 +375,210 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &gpu {
-	/*
-	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
-	 * after display support is added on this board.
-	 */
-	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pm8150b_typec_sbu_out>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4a_1p8>;
+		vcc-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
 	status = "okay";
 };
 
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l5a_0p875>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p875>;
+	status = "okay";
+};
+
+&pm8150b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
+	status = "okay";
+};
+
+&pm8150b_typec {
+	status = "okay";
+
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		altmodes {
+			displayport {
+				svid = /bits/ 16 <0xff01>;
+				vdo = <0x00001c46>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm8150b_typec_mux_in: endpoint {
+					remote-endpoint = <&usb_1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				pm8150b_typec_sbu_out: endpoint {
+					remote-endpoint = <&fsa4480_sbu_mux>;
+				};
+			};
+		};
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -378,6 +589,10 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -402,6 +617,13 @@
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <126 4>;
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-disable;
+	};
+
 };
 
 &uart2 {
@@ -445,13 +667,26 @@
 &usb_1_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pm8150b_typec_mux_in>;
 };
 
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
 &usb_2_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l5a_0p875>;
 };
 
 &usb_1 {
@@ -463,7 +698,16 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 };
 
 &usb_2_dwc3 {
diff --git a/src/arm64/qcom/sm8150.dtsi b/src/arm64/qcom/sm8150.dtsi
index 97623af..761a675 100644
--- a/src/arm64/qcom/sm8150.dtsi
+++ b/src/arm64/qcom/sm8150.dtsi
@@ -1824,7 +1824,7 @@
 			      <0x0 0x010ad000 0x0 0x3000>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1878,7 +1878,7 @@
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -1915,7 +1915,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1972,7 +1972,7 @@
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -2016,7 +2016,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2061,10 +2061,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8150-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2074,16 +2072,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2957,11 +2949,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					replicator1_in: endpoint {
 						remote-endpoint = <&replicator_out1>;
 					};
@@ -3447,37 +3436,56 @@
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>,
-				      <0 0x088eb600 0 0x200>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -3565,10 +3573,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3589,6 +3597,25 @@
 				snps,dis_enblslpm_quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};
 
@@ -3618,10 +3645,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3640,7 +3667,7 @@
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -3719,6 +3746,13 @@
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -3746,6 +3780,86 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8150-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0x0ae90a00 0 0x600>,
+				      <0 0x0ae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8250_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -3932,6 +4046,7 @@
 				      "dp_phy_pll_link_clk",
 				      "dp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -4170,7 +4285,7 @@
 			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi b/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
index 85e5cf3..946365f 100644
--- a/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -23,7 +24,7 @@
 /delete-node/ &xbl_aop_mem;
 
 / {
-	classis-type = "tablet";
+	chassis-type = "tablet";
 
 	/* required for bootloader to select correct board */
 	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
@@ -114,7 +115,7 @@
 	};
 
 	reserved-memory {
-		xbl_aop_mem: xbl-aop@80700000 {
+		xbl_aop_mem: xbl-aop@80600000 {
 			reg = <0x0 0x80600000 0x0 0x260000>;
 			no-map;
 		};
@@ -627,6 +628,41 @@
 	};
 };
 
+&pm8150b_typec {
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_role_switch_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm8150b_vbus {
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -664,11 +700,12 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
+	usb-role-switch;
 };
 
 &usb_1_hsphy {
@@ -678,6 +715,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch_out {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
 &ufs_mem_hc {
 	vcc-supply = <&vreg_l17a_3p0>;
 	vcc-max-microamp = <800000>;
diff --git a/src/arm64/qcom/sm8250-xiaomi-pipa.dts b/src/arm64/qcom/sm8250-xiaomi-pipa.dts
new file mode 100644
index 0000000..86e1f7f
--- /dev/null
+++ b/src/arm64/qcom/sm8250-xiaomi-pipa.dts
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Copyright (c) 2023 Luka Panio <lukapanio@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+
+	model = "Xiaomi Pad 6";
+	compatible = "xiaomi,pipa", "qcom,sm8250";
+
+	chassis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x34 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1800>;
+			height = <2880>;
+			stride = <(1800 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery_l: battery-l {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	battery_r: battery-r {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p35>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_r>;
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_l>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn";
+	status = "okay";
+};
diff --git a/src/arm64/qcom/sm8250.dtsi b/src/arm64/qcom/sm8250.dtsi
index be97047..760501c 100644
--- a/src/arm64/qcom/sm8250.dtsi
+++ b/src/arm64/qcom/sm8250.dtsi
@@ -671,6 +671,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8250", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -2123,7 +2124,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2227,7 +2228,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2328,7 +2329,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c10000 {
+		pcie2: pcie@1c10000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x64000000 0 0xf1d>,
@@ -2434,7 +2435,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2463,29 +2464,48 @@
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-37500000 {
+					opp-hz = /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8250-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2493,16 +2513,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2543,6 +2557,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8250-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		wsamacro: codec@3240000 {
 			compatible = "qcom,sm8250-lpass-wsa-macro";
 			reg = <0 0x03240000 0 0x1000>;
@@ -2565,7 +2584,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
@@ -2631,7 +2650,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			reg = <0 0x03210000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			status = "disabled";
@@ -2678,7 +2697,7 @@
 		};
 
 		/* tx macro */
-		swr2: soundwire-controller@3230000 {
+		swr2: soundwire@3230000 {
 			reg = <0 0x03230000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -3095,11 +3114,8 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					tpda_out_funnel_qatb: endpoint {
 						remote-endpoint = <&funnel_qatb_in_tpda>;
 					};
@@ -3142,11 +3158,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_qatb_in_tpda: endpoint {
 						remote-endpoint = <&tpda_out_funnel_qatb>;
 					};
@@ -3355,11 +3367,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					etf_in_funnel_swao_out: endpoint {
 						remote-endpoint = <&funnel_swao_out_etf>;
 					};
@@ -3443,8 +3452,6 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				port {
 					tpdm_mm_out_tpda9: endpoint {
 						remote-endpoint = <&tpda_9_in_tpdm_mm>;
@@ -3710,11 +3717,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_apss_merg_in_funnel_apss: endpoint {
 					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
 					};
@@ -3889,32 +3892,26 @@
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -4141,6 +4138,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -4209,6 +4207,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
@@ -4223,7 +4222,7 @@
 				iommus = <&apps_smmu 0x20 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -6018,7 +6017,7 @@
 			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {
diff --git a/src/arm64/qcom/sm8350.dtsi b/src/arm64/qcom/sm8350.dtsi
index b462362..e78c83a 100644
--- a/src/arm64/qcom/sm8350.dtsi
+++ b/src/arm64/qcom/sm8350.dtsi
@@ -289,6 +289,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8350", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -677,9 +678,9 @@
 				 <0>,
 				 <0>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <0>;
 		};
@@ -919,9 +920,9 @@
 			};
 		};
 
-		gpi_dma0: dma-controller@9800000 {
+		gpi_dma0: dma-controller@900000 {
 			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
-			reg = <0 0x09800000 0 0x60000>;
+			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -1498,7 +1499,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1591,7 +1592,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1679,7 +1680,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1723,10 +1724,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -1734,17 +1733,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -1818,6 +1811,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8350-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0 0x20000>,
@@ -2021,7 +2019,7 @@
 			compatible = "qcom,sm8350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2063,7 +2061,7 @@
 			compatible = "qcom,sm8350-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2238,34 +2236,27 @@
 			};
 		};
 
-		usb_2_qmpphy: phy-wrapper@88eb000 {
+		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8350-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
+			reg = <0 0x088eb000 0 0x2000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
-
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			usb_2_ssphy: phy@88ebe00 {
-				reg = <0 0x088ebe00 0 0x200>,
-				      <0 0x088ec000 0 0x200>,
-				      <0 0x088eb200 0 0x1100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 		};
 
 		dc_noc: interconnect@90c0000 {
@@ -2418,7 +2409,7 @@
 				iommus = <&apps_smmu 0x20 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -2453,35 +2444,6 @@
 			#size-cells = <2>;
 			ranges;
 
-			dpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				/* TODO: opp-200000000 should work with
-				 * &rpmhpd_opp_low_svs, but one some of
-				 * sm8350_hdk boards reboot using this
-				 * opp.
-				 */
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-300000000 {
-					opp-hz = /bits/ 64 <300000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-345000000 {
-					opp-hz = /bits/ 64 <345000000>;
-					required-opps = <&rpmhpd_opp_svs_l1>;
-				};
-
-				opp-460000000 {
-					opp-hz = /bits/ 64 <460000000>;
-					required-opps = <&rpmhpd_opp_nom>;
-				};
-			};
-
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8350-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
@@ -2510,6 +2472,35 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <0>;
 
+				dpu_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-200000000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -3207,7 +3198,7 @@
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3512,7 +3503,7 @@
 			compatible = "qcom,sm8350-cdsp-pas";
 			reg = <0 0x98900000 0 0x1400000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git a/src/arm64/qcom/sm8450-hdk.dts b/src/arm64/qcom/sm8450-hdk.dts
index 20153d0..a20d5d7 100644
--- a/src/arm64/qcom/sm8450-hdk.dts
+++ b/src/arm64/qcom/sm8450-hdk.dts
@@ -580,6 +580,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8450/a730_zap.mbn";
+	};
+};
+
 &i2c9 {
 	clock-frequency = <400000>;
 	status = "okay";
diff --git a/src/arm64/qcom/sm8450.dtsi b/src/arm64/qcom/sm8450.dtsi
index 1783fa7..01e4dfc 100644
--- a/src/arm64/qcom/sm8450.dtsi
+++ b/src/arm64/qcom/sm8450.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
 #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8450-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
@@ -18,6 +19,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/reset/qcom,sm8450-gpucc.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
@@ -754,9 +756,9 @@
 				 <&pcie0_phy>,
 				 <&pcie1_phy>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
@@ -1739,7 +1741,12 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8450-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8450-pcie0";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1848,7 +1855,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8450-pcie1";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2014,6 +2021,206 @@
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-730.1", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-818000000 {
+					opp-hz = /bits/ 64 <818000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-791000000 {
+					opp-hz = /bits/ 64 <791000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-734000000 {
+					opp-hz = /bits/ 64 <734000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-599000000 {
+					opp-hz = /bits/ 64 <599000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-545000000 {
+					opp-hz = /bits/ 64 <545000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-492000000 {
+					opp-hz = /bits/ 64 <492000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-421000000 {
+					opp-hz = /bits/ 64 <421000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-317000000 {
+					opp-hz = /bits/ 64 <317000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-285000000 {
+					opp-hz = /bits/ 64 <285000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8450-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "gmu",
+				      "hub",
+				      "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm8450-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -2149,18 +2356,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr4: soundwire-controller@31f0000 {
+		swr4: soundwire@31f0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x031f0000 0 0x2000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2168,6 +2370,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2197,18 +2402,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2218,6 +2417,9 @@
 			qcom,din-ports = <0>;
 			qcom,dout-ports = <5>;
 
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
@@ -2243,14 +2445,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2264,18 +2461,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03250000 0 0x2000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2283,6 +2474,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2302,17 +2496,20 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@33b0000 {
+		swr2: soundwire@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x033b0000 0 0x2000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2339,8 +2536,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec", "npl";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
@@ -4122,7 +4317,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -4171,10 +4366,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8450-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref", "ref_aux", "qref";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -4182,17 +4375,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ice: crypto@1d88000 {
diff --git a/src/arm64/qcom/sm8550-mtp.dts b/src/arm64/qcom/sm8550-mtp.dts
index 9a70875..c1135ad 100644
--- a/src/arm64/qcom/sm8550-mtp.dts
+++ b/src/arm64/qcom/sm8550-mtp.dts
@@ -10,6 +10,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -510,6 +511,134 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_s6g_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
 };
 
 &i2c_master_hub_0 {
diff --git a/src/arm64/qcom/sm8550-qrd.dts b/src/arm64/qcom/sm8550-qrd.dts
index eef811d..d401d63 100644
--- a/src/arm64/qcom/sm8550-qrd.dts
+++ b/src/arm64/qcom/sm8550-qrd.dts
@@ -11,6 +11,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -527,6 +528,126 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_s6g_1p86>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &i2c_master_hub_0 {
@@ -585,6 +706,13 @@
 	};
 };
 
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8550/ipa_fws.mbn";
+	status = "okay";
+};
+
 &gcc {
 	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
 		 <&pcie0_phy>,
@@ -596,6 +724,14 @@
 		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio17";
diff --git a/src/arm64/qcom/sm8550.dtsi b/src/arm64/qcom/sm8550.dtsi
index 7b9ddde..ee1ba5a 100644
--- a/src/arm64/qcom/sm8550.dtsi
+++ b/src/arm64/qcom/sm8550.dtsi
@@ -285,9 +285,9 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <800>;
+				entry-latency-us = <550>;
 				exit-latency-us = <750>;
-				min-residency-us = <4090>;
+				min-residency-us = <6700>;
 				local-timer-stop;
 			};
 
@@ -296,27 +296,37 @@
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <600>;
-				exit-latency-us = <1550>;
-				min-residency-us = <4791>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
 				local-timer-stop;
 			};
+
+			PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "goldplus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
 		};
 
 		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
-				entry-latency-us = <1050>;
-				exit-latency-us = <2500>;
-				min-residency-us = <5309>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
 			};
 
 			CLUSTER_SLEEP_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <2700>;
-				exit-latency-us = <3500>;
-				min-residency-us = <13959>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
 			};
 		};
 	};
@@ -324,6 +334,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8550", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x19000>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 		};
 	};
@@ -400,7 +411,7 @@
 		CPU_PD7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			domain-idle-states = <&PRIME_CPU_SLEEP_0>;
 		};
 
 		CLUSTER_PD: power-domain-cluster {
@@ -1677,7 +1688,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8550-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0 0x01c00000 0 0x3000>,
@@ -1768,7 +1784,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0x0 0x01c08000 0x0 0x3000>,
@@ -1979,6 +1995,128 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43050a01", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			/* Speedbin needs more work on A740+, keep only lower freqs */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-680000000 {
+					opp-hz = /bits/ 64 <680000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-615000000 {
+					opp-hz = /bits/ 64 <615000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-475000000 {
+					opp-hz = /bits/ 64 <475000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-401000000 {
+					opp-hz = /bits/ 64 <401000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-348000000 {
+					opp-hz = /bits/ 64 <348000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+				};
+
+				opp-295000000 {
+					opp-hz = /bits/ 64 <295000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm8550-gpucc";
 			reg = <0 0x03d90000 0 0xa000>;
@@ -1990,6 +2128,89 @@
 			#power-domain-cells = <1>;
 		};
 
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
@@ -2040,17 +2261,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2058,6 +2275,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2086,17 +2306,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2104,18 +2319,21 @@
 			clock-names = "iface";
 			label = "RX";
 
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
-			qcom,din-ports = <0>;
-			qcom,dout-ports = <10>;
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
 
-			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
 
 			#address-cells = <2>;
 			#size-cells = <0>;
@@ -2131,14 +2349,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2151,17 +2364,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2169,6 +2377,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2188,16 +2399,19 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
-			clocks = <&lpass_vamacro>;
+			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2224,9 +2438,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
 			#sound-dai-cells = <1>;
@@ -2923,8 +3134,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
diff --git a/src/arm64/qcom/sm8650-mtp.dts b/src/arm64/qcom/sm8650-mtp.dts
new file mode 100644
index 0000000..be133a3
--- /dev/null
+++ b/src/arm64/qcom/sm8650-mtp.dts
@@ -0,0 +1,727 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 MTP";
+	compatible = "qcom,sm8650-mtp", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3e_0p9>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+	vdda-qref-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		output-disable;
+		power-source = <1>; /* 1.8 V */
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
+ * USB SS -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/src/arm64/qcom/sm8650-qrd.dts b/src/arm64/qcom/sm8650-qrd.dts
new file mode 100644
index 0000000..b9151c2
--- /dev/null
+++ b/src/arm64/qcom/sm8650-qrd.dts
@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 QRD";
+	compatible = "qcom,sm8650-qrd", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+		serial1 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8650/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pmk8550_rtc {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&spi4 {
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_irq: ts-irq-state {
+		pins = "gpio161";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-disable;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio162";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		vddio-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_l15b_1p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa0p8-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p9-supply = <&vreg_s6c_1p8>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
+ * USB SS -> NB7VPQ904MMUTWG -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/src/arm64/qcom/sm8650.dtsi b/src/arm64/qcom/sm8650.dtsi
new file mode 100644
index 0000000..2df7712
--- /dev/null
+++ b/src/arm64/qcom/sm8650.dtsi
@@ -0,0 +1,6013 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sm8650-gpucc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0x100>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x200>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x300>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x400>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x500>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x600>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x4";
+			reg = <0 0x700>;
+
+			clocks = <&cpufreq_hw 2>;
+
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <588>;
+
+			qcom,freq-domain = <&cpufreq_hw 2>;
+
+			#cooling-cells = <2>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			SILVER_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			GOLD_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8650", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8650-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8650-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>,
+					     <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0 0x80000000 0 0xe00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm@80e00000 {
+			reg = <0 0x80e00000 0 0x400000>;
+			no-map;
+		};
+
+		/* Merged xbl_dtlog, xbl_ramdump and aop_image regions */
+		xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		/* Secdata region can be reused by apps */
+
+		smem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi@81f00000 {
+			reg = <0 0x81f00000 0 0x20000>;
+			no-map;
+		};
+
+		pvmfw_mem: pvmfw@824a0000 {
+			reg = <0 0x824a0000 0 0x100000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@82800000 {
+			reg = <0 0x82800000 0 0x2000000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@86b00000 {
+			reg = <0 0x86b00000 0 0x4900000>;
+			no-map;
+		};
+
+		mpss_dsm_mem_2: mpss-dsm-2@8b400000 {
+			reg = <0 0x8b400000 0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8bc00000 {
+			reg = <0 0x8bc00000 0 0xf400000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+			reg = <0 0x9b000000 0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@9b080000 {
+			reg = <0 0x9b080000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@9b090000 {
+			reg = <0 0x9b090000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+			reg = <0 0x9b09a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss@9b0a0000 {
+			reg = <0 0x9b0a0000 0 0x1e0000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared@9b280000 {
+			reg = <0 0x9b280000 0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared@9b2e0000 {
+			reg = <0 0x9b2e0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera@9b300000 {
+			reg = <0 0x9b300000 0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@9bb00000 {
+			reg = <0 0x9bb00000 0 0x800000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@9c300000 {
+			reg = <0 0x9c300000 0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@9ca00000 {
+			reg = <0 0x9ca00000 0 0x1400000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 {
+			reg = <0 0x9de00000 0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 {
+			reg = <0 0x9de80000 0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@9df00000 {
+			reg = <0 0x9df00000 0 0x4080000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@d7c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xd7c00000 0 0x400000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		/* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */
+		tz_merged_mem: tz-merged@d8000000 {
+			reg = <0 0xd8000000 0 0x800000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf@e6440000 {
+			reg = <0 0xe6440000 0 0x2dd000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm@f3800000 {
+			reg = <0 0xf3800000 0 0x4400000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm@f7c00000 {
+			reg = <0 0xf7c00000 0 0x4c00000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0 0xff800000 0 0x600000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <435>, <428>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8650-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie_1_phy_aux_clk>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
+			reg = <0 0x00406000 0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			uart15: serial@89c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0 0x009c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			clock-names = "s-ahb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00980000 0 0x4000>;
+
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00984000 0 0x4000>;
+
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00988000 0 0x4000>;
+
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0098c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00990000 0 0x4000>;
+
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00994000 0 0x4000>;
+
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00998000 0 0x4000>;
+
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0099c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a0000 0 0x4000>;
+
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a4000 0 0x4000>;
+
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xc>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+
+			iommus = <&apps_smmu 0xa3 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8650-cnoc-main";
+			reg = <0 0x01500000 0 0x14080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8650-config-noc";
+			reg = <0 0x01600000 0 0x6200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8650-system-noc";
+			reg = <0 0x01680000 0 0x1d080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8650-pcie-anoc";
+			reg = <0 0x016c0000 0 0x12200>;
+
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8650-aggre1-noc";
+			reg = <0 0x016e0000 0 0x16400>;
+
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8650-aggre2-noc";
+			reg = <0 0x01700000 0 0x1e400>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8650-mmss-noc";
+			reg = <0 0x01780000 0 0x5b800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8650-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>,
+				 <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1480 0x1>,
+				    <0x100 &apps_smmu 0x1481 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			dma-coherent;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
+				 <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8650-qmp-ufs-phy";
+			reg = <0 0x01d80000 0 0x2000>;
+
+			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref",
+				      "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<100000000 403000000>,
+					<100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0>;
+
+			lanes-per-direction = <2>;
+			qcom,ice = <&ice>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8650-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sm8650-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0xa0000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8650-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8650-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+					<&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <1>;
+
+				label = "mpss";
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8650-lpass-lpiaon-noc";
+			reg = <0 0x07400000 0 0x19080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,sm8650-lpass-lpicx-noc";
+			reg = <0 0x07430000 0 0x3a200>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8650-lpass-ag-noc";
+			reg = <0 0x07e40000 0 0xe080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			iommus = <&apps_smmu 0x540 0>;
+
+			bus-width = <4>;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8650-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x1c00 0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8650-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupts-extended = <&mdss 0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae95000 0 0x200>,
+				      <0 0x0ae95200 0 0x280>,
+				      <0 0x0ae95500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae97000 0 0x200>,
+				      <0 0x0ae97200 0 0x280>,
+				      <0 0x0ae97500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp0: displayport-controller@af54000 {
+				compatible = "qcom,sm8650-dp";
+				reg = <0 0xaf54000 0 0x104>,
+				      <0 0xaf54200 0 0xc0>,
+				      <0 0xaf55000 0 0x770>,
+				      <0 0xaf56000 0 0x9c>,
+				      <0 0xaf57000 0 0x9c>;
+
+				interrupts-extended = <&mdss 12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				operating-points-v2 = <&dp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8650-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8650-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e3000 0 0x154>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x40 0>;
+
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,usb3_lpm_capable;
+				snps,usb2-lpm-disable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+
+				dma-coherent;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8650-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			interrupt-parent = <&intc>;
+
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>,
+					  <138 251 5>, <143 244 4>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c228000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c228000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <15>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c229000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c229000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c22a000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c22a000 0 0x1000>, /* TM */
+			      <0 0x0c224000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <13>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+
+			interrupt-controller;
+			#interrupt-cells = <4>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8650-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 211>;
+
+			wakeup-parent = <&pdc>;
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio66", "gpio67";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio70", "gpio71";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio74", "gpio75";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio78", "gpio79";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio60", "gpio61";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio63";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio3";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio7";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio11";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio19";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio23";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio27";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart15_default: qup-uart15-default-state {
+				/* TX, RX */
+				pins = "gpio30", "gpio31";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
+			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17140000 0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>,
+			      <0 0x17a30000 0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&CLUSTER_PD>;
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8650-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8650-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>,
+			      <0 0x17d94000 0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2",
+				    "freq-domain3";
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2",
+					  "dcvsh-irq-3";
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		pmu@24091000 {
+			compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x24091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <7980000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <12157000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <14060000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <16113000>;
+				};
+			};
+		};
+
+		pmu@240b7400 {
+			compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b7400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8650-gem-noc";
+			reg = <0 0x24100000 0 0xc5080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sm8650-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8650-adsp-pas";
+			reg = <0 0x30000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <2>;
+
+				label = "lpass";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "adsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1043 0x20>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1044 0x20>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1045 0x20>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1046 0x20>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1007 0x40>,
+							 <&apps_smmu 0x1067 0x0>,
+							 <&apps_smmu 0x1087 0x0>;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8650-nsp-noc";
+			reg = <0 0x320c0000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8650-cdsp-pas";
+			reg = <0 0x32300000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <5>;
+
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "cdsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+
+						iommus = <&apps_smmu 0x1961 0x0>,
+							 <&apps_smmu 0x0c01 0x20>,
+							 <&apps_smmu 0x19c1 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x19c2 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c03 0x20>,
+							 <&apps_smmu 0x19c3 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c04 0x20>,
+							 <&apps_smmu 0x19c4 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c05 0x20>,
+							 <&apps_smmu 0x19c5 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x19c6 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c07 0x20>,
+							 <&apps_smmu 0x19c7 0x0>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x19c8 0x0>;
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				ddr-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss4-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss5-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss6-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss6-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss7-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss7-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/src/arm64/qcom/x1e80100-crd.dts b/src/arm64/qcom/x1e80100-crd.dts
new file mode 100644
index 0000000..7532d8e
--- /dev/null
+++ b/src/arm64/qcom/x1e80100-crd.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
diff --git a/src/arm64/qcom/x1e80100-qcp.dts b/src/arm64/qcom/x1e80100-qcp.dts
new file mode 100644
index 0000000..a37ad94
--- /dev/null
+++ b/src/arm64/qcom/x1e80100-qcp.dts
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 QCP";
+	compatible = "qcom,x1e80100-qcp", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vph_pwr>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vph_pwr>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <33 3>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
diff --git a/src/arm64/qcom/x1e80100.dtsi b/src/arm64/qcom/x1e80100.dtsi
new file mode 100644
index 0000000..6f75fc3
--- /dev/null
+++ b/src/arm64/qcom/x1e80100.dtsi
@@ -0,0 +1,3527 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD8>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD9>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU10: cpu@20200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD10>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU11: cpu@20300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD11>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+
+				core1 {
+					cpu = <&CPU9>;
+				};
+
+				core2 {
+					cpu = <&CPU10>;
+				};
+
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CLUSTER_C4: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <180>;
+				exit-latency-us = <320>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_CL4: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "l2-ret";
+				arm,psci-suspend-param = <0x01000044>;
+				entry-latency-us = <350>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+
+			CLUSTER_CL5: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret-pll-off";
+				arm,psci-suspend-param = <0x01000054>;
+				entry-latency-us = <2200>;
+				exit-latency-us = <2500>;
+				min-residency-us = <7000>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-x1e80100", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,x1e80100-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,x1e80100-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD8: power-domain-cpu8 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD9: power-domain-cpu9 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD10: power-domain-cpu10 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD11: power-domain-cpu11 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CLUSTER_PD0: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD1: power-domain-cpu-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD2: power-domain-cpu-cluster2 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x800000>;
+			no-map;
+		};
+
+		hyp_elf_package_mem: hyp-elf-package@80800000 {
+			reg = <0x0 0x80800000 0x0 0x200000>;
+			no-map;
+		};
+
+		ncc_mem: ncc@80a00000 {
+			reg = <0x0 0x80a00000 0x0 0x400000>;
+			no-map;
+		};
+
+		cpucp_log_mem: cpucp-log@80e00000 {
+			reg = <0x0 0x80e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_mem: cpucp@80e40000 {
+			reg = <0x0 0x80e40000 0x0 0x540000>;
+			no-map;
+		};
+
+		reserved-region@81380000 {
+			reg = <0x0 0x81380000 0x0 0x80000>;
+			no-map;
+		};
+
+		tags_mem: tags-region@81400000 {
+			reg = <0x0 0x81400000 0x0 0x1a0000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@81a00000 {
+			reg = <0x0 0x81a00000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@81a40000 {
+			reg = <0x0 0x81a40000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@81c80000 {
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@81ca0000 {
+			reg = <0x0 0x81ca0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@81ce0000 {
+			reg = <0x0 0x81ce0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@81ce4000 {
+			reg = <0x0 0x81ce4000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@81cff000 {
+			reg = <0x0 0x81cff000 0x0 0x1000>;
+			no-map;
+		};
+
+		pdp_ns_shared_mem: pdp-ns-shared@81e00000 {
+			reg = <0x0 0x81e00000 0x0 0x100000>;
+			no-map;
+		};
+
+		gpu_prr_mem: gpu-prr@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x10000>;
+			no-map;
+		};
+
+		tpm_control_mem: tpm-control@81f10000 {
+			reg = <0x0 0x81f10000 0x0 0x10000>;
+			no-map;
+		};
+
+		usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 {
+			reg = <0x0 0x81f20000 0x0 0x10000>;
+			no-map;
+		};
+
+		pld_pep_mem: pld-pep@81f30000 {
+			reg = <0x0 0x81f30000 0x0 0x6000>;
+			no-map;
+		};
+
+		pld_gmu_mem: pld-gmu@81f36000 {
+			reg = <0x0 0x81f36000 0x0 0x1000>;
+			no-map;
+		};
+
+		pld_pdp_mem: pld-pdp@81f37000 {
+			reg = <0x0 0x81f37000 0x0 0x1000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0x0 0x82700000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 {
+			reg = <0x0 0x82800000 0x0 0xc00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 {
+			reg = <0x0 0x84b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 {
+			reg = <0x0 0x85300000 0x0 0x80000>;
+			no-map;
+		};
+
+		adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 {
+			reg = <0x0 0x866c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@86700000 {
+			reg = <0x0 0x86700000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_boot_mem: adsp-boot@86b00000 {
+			reg = <0x0 0x86b00000 0x0 0xc00000>;
+			no-map;
+		};
+
+		video_mem: video@87700000 {
+			reg = <0x0 0x87700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@87e00000 {
+			reg = <0x0 0x87e00000 0x0 0x3a00000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 {
+			reg = <0x0 0x8d900000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8d9fe000 {
+			reg = <0x0 0x8d9fe000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: camera@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x800000>;
+			no-map;
+		};
+
+		av1_encoder_mem: av1-encoder@8e900000 {
+			reg = <0x0 0x8e900000 0x0 0x700000>;
+			no-map;
+		};
+
+		reserved-region@8f000000 {
+			reg = <0x0 0x8f000000 0x0 0xa00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@8fa00000 {
+			reg = <0x0 0x8fa00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_wpss_dtb_mem: q6-wpss-dtb@91300000 {
+			reg = <0x0 0x91300000 0x0 0x80000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@d8000000 {
+			reg = <0x0 0xd8000000 0x0 0x40000>;
+			no-map;
+		};
+
+		reserved-region@d8040000 {
+			reg = <0x0 0xd8040000 0x0 0xa0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d80e0000 {
+			reg = <0x0 0xd80e0000 0x0 0x520000>;
+			no-map;
+		};
+
+		ta_mem: ta@d8600000 {
+			reg = <0x0 0xd8600000 0x0 0x8a00000>;
+			no-map;
+		};
+
+		tags_mem1: tags@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x26a0000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0x0 0xff800000 0x0 0x600000>;
+			no-map;
+		};
+
+		smem_mem: smem@ffe00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,x1e80100-gcc";
+			reg = <0 0x00100000 0 0x200000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c16: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi16: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c17: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c17_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi17: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c18: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c18_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi18: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c19: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c19_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi19: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c20: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c20_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi20: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c21: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c21_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi21: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart21: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c22: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c22_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi22: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c23: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c23_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi23: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x136 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x123 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@b00000  {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00b00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x456 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_0: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00bc0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x443 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@b84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@b84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@b88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@b88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0xb88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@b8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@b8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@b90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@b90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@b94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@b94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@b98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@b98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@b9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@b9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,x1e80100-cnoc-main";
+			reg = <0 0x1500000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,x1e80100-cnoc-cfg";
+			reg = <0 0x1600000 0 0x6600>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,x1e80100-system-noc";
+			reg = <0 0x1680000 0 0x1c080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_south_anoc: interconnect@16c0000 {
+			compatible = "qcom,x1e80100-pcie-south-anoc";
+			reg = <0 0x16c0000 0 0xd080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_center_anoc: interconnect@16d0000 {
+			compatible = "qcom,x1e80100-pcie-center-anoc";
+			reg = <0 0x16d0000 0 0x7000>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,x1e80100-aggre1-noc";
+			reg = <0 0x16E0000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,x1e80100-aggre2-noc";
+			reg = <0 0x1700000 0 0x1c400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_north_anoc: interconnect@1740000 {
+			compatible = "qcom,x1e80100-pcie-north-anoc";
+			reg = <0 0x1740000 0 0x9080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_center_anoc: interconnect@1750000 {
+			compatible = "qcom,x1e80100-usb-center-anoc";
+			reg = <0 0x1750000 0 0x8800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_north_anoc: interconnect@1760000 {
+			compatible = "qcom,x1e80100-usb-north-anoc";
+			reg = <0 0x1760000 0 0x7080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_south_anoc: interconnect@1770000 {
+			compatible = "qcom,x1e80100-usb-south-anoc";
+			reg = <0 0x1770000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,x1e80100-mmss-noc";
+			reg = <0 0x1780000 0 0x5B800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		gem_noc: interconnect@26400000 {
+			compatible = "qcom,x1e80100-gem-noc";
+			reg = <0 0x26400000 0 0x311200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,x1e80100-nsp-noc";
+			reg = <0 0x320C0000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,x1e80100-lpass-ag-noc";
+			reg = <0 0x7e40000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,x1e80100-lpass-lpiaon-noc";
+			reg = <0 0x7400000 0 0x19080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,x1e80100-lpass-lpicx-noc";
+			reg = <0 0x7430000 0 0x3A200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,x1e80100-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			qcom,pdc-ranges = <0 480 42>, <42 251 5>,
+					  <47 522 52>, <99 609 32>,
+					  <131 717 12>, <143 816 19>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,x1e80100-tlmm";
+			reg = <0 0x0f100000 0 0xf00000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 239>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup0_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup0_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup0_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup0_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup0_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup0_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup0_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio14", "gpio15";
+				function = "qup0_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio54", "gpio55";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio84", "gpio85";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c22_data_clk: qup-i2c22-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio88", "gpio89";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c23_data_clk: qup-i2c23-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio27";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio13";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio14", "gpio15", "gpio12";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio53";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio54", "gpio55", "gpio52";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio67";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio71";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio75";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio72", "gpio73", "gpio74";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio79";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio76", "gpio77", "gpio78";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_cs: qup-spi20-cs-state {
+				pins = "gpio83";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_data_clk: qup-spi20-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_cs: qup-spi21-cs-state {
+				pins = "gpio87";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_data_clk: qup-spi21-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio84", "gpio85", "gpio86";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_cs: qup-spi22-cs-state {
+				pins = "gpio91";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_data_clk: qup-spi22-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio88", "gpio89", "gpio90";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_cs: qup-spi23-cs-state {
+				pins = "gpio85";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_data_clk: qup-spi23-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio86", "gpio87", "gpio84";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart21_default: qup-uart21-default-state {
+				/* TX, RX */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se5";
+				drive-strength= <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+		};
+
+		intc: interrupt-controller@17000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17000000 0 0x10000>,     /* GICD */
+			      <0 0x17080000 0 0x480000>;    /* GICR * 12 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17040000 0 0x40000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17500000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17500000 0 0x10000>,
+			      <0 0x17510000 0 0x10000>,
+			      <0 0x17520000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			qcom,drv-count = <3>;
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,x1e80100-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,x1e80100-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		timer@17800000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17800000 0 0x1000>;
+
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0 0x20000000>;
+
+			frame@17801000 {
+				reg = <0 0x17801000 0x1000>,
+				      <0 0x17802000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17803000 {
+				reg = <0 0x17803000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17805000 {
+				reg = <0 0x17805000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17807000 {
+				reg = <0 0x17807000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17809000 {
+				reg = <0 0x17809000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1780b000 {
+				reg = <0 0x1780b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1780d000 {
+				reg = <0 0x1780d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,x1e80100-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>,
+			      <0 0x25c00000 0 0x200000>,
+			      <0 0x25e00000 0 0x200000>,
+			      <0 0x26000000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/src/arm64/renesas/draak.dtsi b/src/arm64/renesas/draak.dtsi
index ef3bb83..6f133f5 100644
--- a/src/arm64/renesas/draak.dtsi
+++ b/src/arm64/renesas/draak.dtsi
@@ -356,12 +356,9 @@
 				 * CVBS and HDMI inputs through SW[49-53]
 				 * switches.
 				 *
-				 * CVBS is the default selection, link it to
-				 * VIN4 here.
+				 * HDMI is the default selection, leave CVBS
+				 * not connected here.
 				 */
-				adv7180_out: endpoint {
-					remote-endpoint = <&vin4_in>;
-				};
 			};
 		};
 
@@ -374,6 +371,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -423,13 +426,11 @@
 				 * CVBS and HDMI inputs through SW[49-53]
 				 * switches.
 				 *
-				 * CVBS is the default selection, leave HDMI
-				 * not connected here.
+				 * HDMI is the default selection, link it to
+				 * VIN4 here.
 				 */
 				adv7612_out: endpoint {
-					pclk-sample = <0>;
-					hsync-active = <0>;
-					vsync-active = <0>;
+					remote-endpoint = <&vin4_in>;
 				};
 			};
 		};
@@ -580,8 +581,8 @@
 		function = "usb0";
 	};
 
-	vin4_pins_cvbs: vin4 {
-		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+	vin4_pins: vin4 {
+		groups = "vin4_data24", "vin4_sync", "vin4_clk";
 		function = "vin4";
 	};
 };
@@ -729,7 +730,7 @@
 };
 
 &vin4 {
-	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-0 = <&vin4_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
@@ -737,7 +738,10 @@
 	ports {
 		port {
 			vin4_in: endpoint {
-				remote-endpoint = <&adv7180_out>;
+				pclk-sample = <0>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				remote-endpoint = <&adv7612_out>;
 			};
 		};
 	};
diff --git a/src/arm64/renesas/ebisu.dtsi b/src/arm64/renesas/ebisu.dtsi
index f1a5778..cba2fde 100644
--- a/src/arm64/renesas/ebisu.dtsi
+++ b/src/arm64/renesas/ebisu.dtsi
@@ -403,6 +403,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/src/arm64/renesas/r8a77970-eagle.dts b/src/arm64/renesas/r8a77970-eagle.dts
index 405404c..0608dce 100644
--- a/src/arm64/renesas/r8a77970-eagle.dts
+++ b/src/arm64/renesas/r8a77970-eagle.dts
@@ -29,6 +29,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	d1p8: regulator-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3p3: regulator-fixed {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -166,6 +175,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&d1p8>;
+		dvdd-supply = <&d1p8>;
+		pvdd-supply = <&d1p8>;
+		dvdd-3v-supply = <&d3p3>;
+		bgvdd-supply = <&d1p8>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi b/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi
index bb4a527..913f70f 100644
--- a/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi
+++ b/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -187,6 +187,9 @@
 };
 
 &hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
diff --git a/src/arm64/renesas/r9a08g045.dtsi b/src/arm64/renesas/r9a08g045.dtsi
index 6c7b29b..5facfad 100644
--- a/src/arm64/renesas/r9a08g045.dtsi
+++ b/src/arm64/renesas/r9a08g045.dtsi
@@ -96,6 +96,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			interrupt-parent = <&irqc>;
 			gpio-ranges = <&pinctrl 0 0 152>;
 			clocks = <&cpg CPG_MOD R9A08G045_GPIO_HCLK>;
 			power-domains = <&cpg>;
@@ -104,6 +105,73 @@
 				 <&cpg R9A08G045_GPIO_SPARE_RESETN>;
 		};
 
+		irqc: interrupt-controller@11050000 {
+			compatible = "renesas,r9a08g045-irqc", "renesas,rzg2l-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0x11050000 0 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nmi",
+					  "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err";
+			clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>,
+				 <&cpg CPG_MOD R9A08G045_IA55_PCLK>;
+			clock-names = "clk", "pclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_IA55_RESETN>;
+		};
+
 		sdhi0: mmc@11c00000  {
 			compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
@@ -146,6 +214,44 @@
 			clock-names = "core", "clkh", "cd", "aclk";
 			resets = <&cpg R9A08G045_SDHI2_IXRST>;
 			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@11c30000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c40000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c40000 0 0x10000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
diff --git a/src/arm64/renesas/r9a09g011.dtsi b/src/arm64/renesas/r9a09g011.dtsi
index 33f2ecf..50ed66d 100644
--- a/src/arm64/renesas/r9a09g011.dtsi
+++ b/src/arm64/renesas/r9a09g011.dtsi
@@ -163,7 +163,7 @@
 		};
 
 		avb: ethernet@a3300000 {
-			compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
+			compatible = "renesas,etheravb-r9a09g011", "renesas,etheravb-rzv2m";
 			reg = <0 0xa3300000 0 0x800>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */
 				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */
diff --git a/src/arm64/renesas/rzg2l-smarc-som.dtsi b/src/arm64/renesas/rzg2l-smarc-som.dtsi
index 547859c..4409c47 100644
--- a/src/arm64/renesas/rzg2l-smarc-som.dtsi
+++ b/src/arm64/renesas/rzg2l-smarc-som.dtsi
@@ -312,6 +312,7 @@
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/src/arm64/renesas/rzg2lc-smarc-som.dtsi b/src/arm64/renesas/rzg2lc-smarc-som.dtsi
index 56ff924..5e4209d 100644
--- a/src/arm64/renesas/rzg2lc-smarc-som.dtsi
+++ b/src/arm64/renesas/rzg2lc-smarc-som.dtsi
@@ -241,6 +241,7 @@
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/src/arm64/renesas/rzg3s-smarc-som.dtsi b/src/arm64/renesas/rzg3s-smarc-som.dtsi
index a199de8..f062d4a 100644
--- a/src/arm64/renesas/rzg3s-smarc-som.dtsi
+++ b/src/arm64/renesas/rzg3s-smarc-som.dtsi
@@ -9,18 +9,36 @@
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
 /*
- * Signals of SW_CONFIG switches:
- * @SW_SD0_DEV_SEL:
- *	0 - SD0 is connected to eMMC
- *	1 - SD0 is connected to uSD0 card
+ * On-board switches' states:
+ * @SW_OFF: switch's state is OFF
+ * @SW_ON:  switch's state is ON
  */
-#define SW_SD0_DEV_SEL	1
+#define SW_OFF		0
+#define SW_ON		1
+
+/*
+ * SW_CONFIG[x] switches' states:
+ * @SW_CONFIG2:
+ *	SW_OFF - SD0 is connected to eMMC
+ *	SW_ON  - SD0 is connected to uSD0 card
+ * @SW_CONFIG3:
+ *	SW_OFF - SD2 is connected to SoC
+ *	SW_ON  - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
+ */
+#define SW_CONFIG2	SW_ON
+#define SW_CONFIG3	SW_ON
 
 / {
 	compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045";
 
 	aliases {
 		mmc0 = &sdhi0;
+#if SW_CONFIG3 == SW_OFF
+		mmc2 = &sdhi2;
+#else
+		eth0 = &eth0;
+		eth1 = &eth1;
+#endif
 	};
 
 	chosen {
@@ -43,7 +61,7 @@
 		enable-active-high;
 	};
 
-#if SW_SD0_DEV_SEL
+#if SW_CONFIG2 == SW_ON
 	vccq_sdhi0: regulator1 {
 		compatible = "regulator-gpio";
 		regulator-name = "SDHI0 VccQ";
@@ -63,13 +81,76 @@
 		regulator-always-on;
 	};
 #endif
+
+	vcc_sdhi2: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+#if SW_CONFIG3 == SW_ON
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
 };
 
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@7 {
+		reg = <7>;
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+#endif
+
 &extal_clk {
 	clock-frequency = <24000000>;
 };
 
-#if SW_SD0_DEV_SEL
+#if SW_CONFIG2 == SW_ON
 /* SD0 slot */
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
@@ -100,7 +181,100 @@
 };
 #endif
 
+#if SW_CONFIG3 == SW_OFF
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_sdhi2>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	status = "okay";
+};
+#endif
+
 &pinctrl {
+	eth0-phy-irq-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "eth0-phy-irq";
+	};
+
+	eth0_pins: eth0 {
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>;  /* ET0_TXC */
+			power-source = <1800>;
+			output-enable;
+			input-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		tx_ctl {
+			pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* ET0_TX_CTL */
+			power-source = <1800>;
+			output-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(1, 2, 1)>,	/* ET0_TXD0 */
+				 <RZG2L_PORT_PINMUX(1, 3, 1)>,	/* ET0_TXD1 */
+				 <RZG2L_PORT_PINMUX(1, 4, 1)>,	/* ET0_TXD2 */
+				 <RZG2L_PORT_PINMUX(2, 0, 1)>,	/* ET0_TXD3 */
+				 <RZG2L_PORT_PINMUX(3, 0, 1)>,	/* ET0_RXC */
+				 <RZG2L_PORT_PINMUX(3, 1, 1)>,	/* ET0_RX_CTL */
+				 <RZG2L_PORT_PINMUX(3, 2, 1)>,	/* ET0_RXD0 */
+				 <RZG2L_PORT_PINMUX(3, 3, 1)>,	/* ET0_RXD1 */
+				 <RZG2L_PORT_PINMUX(4, 0, 1)>,	/* ET0_RXD2 */
+				 <RZG2L_PORT_PINMUX(4, 1, 1)>,	/* ET0_RXD3 */
+				 <RZG2L_PORT_PINMUX(4, 3, 1)>,	/* ET0_MDC */
+				 <RZG2L_PORT_PINMUX(4, 4, 1)>,	/* ET0_MDIO */
+				 <RZG2L_PORT_PINMUX(4, 5, 1)>;	/* ET0_LINKSTA */
+			power-source = <1800>;
+		};
+	};
+
+	eth1-phy-irq-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "eth1-phy-irq";
+	};
+
+	eth1_pins: eth1 {
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>;	/* ET1_TXC */
+			power-source = <1800>;
+			output-enable;
+			input-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		tx_ctl {
+			pinmux = <RZG2L_PORT_PINMUX(7, 1, 1)>;	/* ET1_TX_CTL */
+			power-source = <1800>;
+			output-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(7, 2, 1)>,	/* ET1_TXD0 */
+				 <RZG2L_PORT_PINMUX(7, 3, 1)>,	/* ET1_TXD1 */
+				 <RZG2L_PORT_PINMUX(7, 4, 1)>,	/* ET1_TXD2 */
+				 <RZG2L_PORT_PINMUX(8, 0, 1)>,	/* ET1_TXD3 */
+				 <RZG2L_PORT_PINMUX(8, 4, 1)>,	/* ET1_RXC */
+				 <RZG2L_PORT_PINMUX(9, 0, 1)>,	/* ET1_RX_CTL */
+				 <RZG2L_PORT_PINMUX(9, 1, 1)>,	/* ET1_RXD0 */
+				 <RZG2L_PORT_PINMUX(9, 2, 1)>,	/* ET1_RXD1 */
+				 <RZG2L_PORT_PINMUX(9, 3, 1)>,	/* ET1_RXD2 */
+				 <RZG2L_PORT_PINMUX(10, 0, 1)>,	/* ET1_RXD3 */
+				 <RZG2L_PORT_PINMUX(10, 2, 1)>,	/* ET1_MDC */
+				 <RZG2L_PORT_PINMUX(10, 3, 1)>,	/* ET1_MDIO */
+				 <RZG2L_PORT_PINMUX(10, 4, 1)>;	/* ET1_LINKSTA */
+			power-source = <1800>;
+		};
+	};
+
 	sdhi0_pins: sd0 {
 		data {
 			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
@@ -139,4 +313,26 @@
 		       "SD0_CLK", "SD0_CMD", "SD0_RST#";
 		power-source = <1800>;
 	};
+
+	sdhi2_pins: sd2 {
+		data {
+			pins = "P11_2", "P11_3", "P12_0", "P12_1";
+			input-enable;
+		};
+
+		ctrl {
+			pins = "P11_1";
+			input-enable;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(11, 0, 8)>, /* SD2_CLK */
+				 <RZG2L_PORT_PINMUX(11, 1, 8)>, /* SD2_CMD */
+				 <RZG2L_PORT_PINMUX(11, 2, 8)>, /* SD2_DATA0 */
+				 <RZG2L_PORT_PINMUX(11, 3, 8)>, /* SD2_DATA1 */
+				 <RZG2L_PORT_PINMUX(12, 0, 8)>, /* SD2_DATA2 */
+				 <RZG2L_PORT_PINMUX(12, 1, 8)>, /* SD2_DATA3 */
+				 <RZG2L_PORT_PINMUX(14, 1, 7)>; /* SD2_CD# */
+		};
+	};
 };
diff --git a/src/arm64/renesas/rzg3s-smarc.dtsi b/src/arm64/renesas/rzg3s-smarc.dtsi
index e7073a0..2145201 100644
--- a/src/arm64/renesas/rzg3s-smarc.dtsi
+++ b/src/arm64/renesas/rzg3s-smarc.dtsi
@@ -11,6 +11,26 @@
 / {
 	aliases {
 		serial0 = &scif0;
+		mmc1 = &sdhi1;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(4, 2) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 
@@ -19,6 +39,38 @@
 		pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */
 			 <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */
 	};
+
+	sdhi1_pins: sd1 {
+		data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1-uhs {
+		data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
 };
 
 &scif0 {
@@ -26,3 +78,16 @@
 	pinctrl-0 = <&scif0_pins>;
 	status = "okay";
 };
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <125000000>;
+	status = "okay";
+};
diff --git a/src/arm64/renesas/ulcb-kf.dtsi b/src/arm64/renesas/ulcb-kf.dtsi
index 3885ef3..50de17e 100644
--- a/src/arm64/renesas/ulcb-kf.dtsi
+++ b/src/arm64/renesas/ulcb-kf.dtsi
@@ -234,6 +234,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 
@@ -294,6 +295,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -314,6 +316,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -324,6 +327,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 	};
diff --git a/src/arm64/rockchip/px30-engicam-common.dtsi b/src/arm64/rockchip/px30-engicam-common.dtsi
index 3429e12..5b4e223 100644
--- a/src/arm64/rockchip/px30-engicam-common.dtsi
+++ b/src/arm64/rockchip/px30-engicam-common.dtsi
@@ -7,6 +7,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
 	};
diff --git a/src/arm64/rockchip/px30-evb.dts b/src/arm64/rockchip/px30-evb.dts
index c1bbd55..0a90a88 100644
--- a/src/arm64/rockchip/px30-evb.dts
+++ b/src/arm64/rockchip/px30-evb.dts
@@ -14,6 +14,7 @@
 	compatible = "rockchip,px30-evb", "rockchip,px30";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git a/src/arm64/rockchip/px30-ringneck-haikou.dts b/src/arm64/rockchip/px30-ringneck-haikou.dts
index 7d4c532..16798eb 100644
--- a/src/arm64/rockchip/px30-ringneck-haikou.dts
+++ b/src/arm64/rockchip/px30-ringneck-haikou.dts
@@ -13,6 +13,7 @@
 	compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc2 = &sdmmc;
 	};
 
diff --git a/src/arm64/rockchip/px30.dtsi b/src/arm64/rockchip/px30.dtsi
index 42ce78b..9137dd7 100644
--- a/src/arm64/rockchip/px30.dtsi
+++ b/src/arm64/rockchip/px30.dtsi
@@ -20,7 +20,6 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -632,6 +631,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 12>, <&dmac 13>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
 		#address-cells = <1>;
@@ -647,6 +647,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 14>, <&dmac 15>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
 		#address-cells = <1>;
diff --git a/src/arm64/rockchip/rk3308-rock-pi-s.dts b/src/arm64/rockchip/rk3308-rock-pi-s.dts
index e9810d2..b47fe02 100644
--- a/src/arm64/rockchip/rk3308-rock-pi-s.dts
+++ b/src/arm64/rockchip/rk3308-rock-pi-s.dts
@@ -143,6 +143,68 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "header1-pin3 [GPIO0_B3]",
+		"header1-pin5 [GPIO0_B4]", "", "",
+		"header1-pin11 [GPIO0_B7]",
+		/* GPIO0_C0 - C7 */
+		"header1-pin13 [GPIO0_C0]",
+		"header1-pin15 [GPIO0_C1]", "", "", "",
+		"", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
+		"header1-pin19 [GPIO1_C7]",
+		/* GPIO1_D0 - D7 */
+		"header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]",
+		"", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]",
+		"", "",
+		"header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
+		"header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
+		/* GPIO2_B0 - B7 */
+		"header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
+		"header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
+		"header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
+		"header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_B0 - B7 */
+		"", "", "header2-pin42 [GPIO3_B2]",
+		"header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]",
+		"header2-pin39 [GPIO3_B5]", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 };
diff --git a/src/arm64/rockchip/rk3308.dtsi b/src/arm64/rockchip/rk3308.dtsi
index 2ae4bb7..cfc0a87 100644
--- a/src/arm64/rockchip/rk3308.dtsi
+++ b/src/arm64/rockchip/rk3308.dtsi
@@ -20,6 +20,11 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/src/arm64/rockchip/rk3318-a95x-z2.dts b/src/arm64/rockchip/rk3318-a95x-z2.dts
index 1deef53..c7b1862 100644
--- a/src/arm64/rockchip/rk3318-a95x-z2.dts
+++ b/src/arm64/rockchip/rk3318-a95x-z2.dts
@@ -9,6 +9,7 @@
 	compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
 
 	aliases {
+		ethernet0 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git a/src/arm64/rockchip/rk3326-anbernic-rg351m.dts b/src/arm64/rockchip/rk3326-anbernic-rg351m.dts
index ce318e0..f4d20f2 100644
--- a/src/arm64/rockchip/rk3326-anbernic-rg351m.dts
+++ b/src/arm64/rockchip/rk3326-anbernic-rg351m.dts
@@ -6,30 +6,16 @@
  */
 
 /dts-v1/;
-#include "rk3326-odroid-go.dtsi"
+#include "rk3326-anbernic-rg351m.dtsi"
 
 / {
 	model = "Anbernic RG351M";
 	compatible = "anbernic,rg351m", "rockchip,rk3326";
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm0 0 1000000 0>;
-		pwm-names = "enable";
-	};
 };
 
-/delete-node/ &builtin_gamepad;
-/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
-
 &internal_display {
 	compatible = "elida,kd35t133";
 	iovcc-supply = <&vcc_lcd>;
+	rotation = <270>;
 	vdd-supply = <&vcc_lcd>;
 };
-
-&pwm0 {
-	status = "okay";
-};
-
-/delete-node/ &rk817_charger;
diff --git a/src/arm64/rockchip/rk3326-anbernic-rg351m.dtsi b/src/arm64/rockchip/rk3326-anbernic-rg351m.dtsi
new file mode 100644
index 0000000..b6d041d
--- /dev/null
+++ b/src/arm64/rockchip/rk3326-anbernic-rg351m.dtsi
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	/*
+	 * LED is a tri-state. Driven high it is red, driven low it is
+	 * green, and not driven at all (pin set to input) it is amber.
+	 * Additionally, there is a 2nd LED that is not controllable
+	 * that is on (red) when plugged in to power.
+	 */
+	gpio_led: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin>;
+
+		red_green_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_logic";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "vdd_1v0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vccio_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_bl";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-max-microvolt = <2800000>;
+				regulator-min-microvolt = <2800000>;
+				regulator-name = "vcc_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_wifi: LDO_REG9 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_wifi";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			usb_midu: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5400000>;
+				regulator-min-microvolt = <5000000>;
+				regulator-name = "usb_midu";
+			};
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	#address-cells = <1>;
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		led_pin: led-pin {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/src/arm64/rockchip/rk3326-anbernic-rg351v.dts b/src/arm64/rockchip/rk3326-anbernic-rg351v.dts
new file mode 100644
index 0000000..c79f7a7
--- /dev/null
+++ b/src/arm64/rockchip/rk3326-anbernic-rg351v.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3326-anbernic-rg351m.dtsi"
+
+/ {
+	model = "Anbernic RG351V";
+	compatible = "anbernic,rg351v", "rockchip,rk3326";
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-vol-down {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&internal_display {
+	compatible = "anbernic,rg351v-panel", "newvision,nv3051d";
+	vdd-supply = <&vcc_lcd>;
+};
+
+&io_domains {
+	vccio1-supply = <&vccio_sd>;
+};
+
+&vcc_sd {
+	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <1800000>;
+};
+
+&vccio_sd {
+	regulator-max-microvolt = <1800000>;
+};
diff --git a/src/arm64/rockchip/rk3328-a1.dts b/src/arm64/rockchip/rk3328-a1.dts
index 40bf808..824183e 100644
--- a/src/arm64/rockchip/rk3328-a1.dts
+++ b/src/arm64/rockchip/rk3328-a1.dts
@@ -9,6 +9,7 @@
 	compatible = "azw,beelink-a1", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/src/arm64/rockchip/rk3328-evb.dts b/src/arm64/rockchip/rk3328-evb.dts
index ff6b466..1eef550 100644
--- a/src/arm64/rockchip/rk3328-evb.dts
+++ b/src/arm64/rockchip/rk3328-evb.dts
@@ -11,6 +11,7 @@
 	compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git a/src/arm64/rockchip/rk3328-nanopi-r2s.dts b/src/arm64/rockchip/rk3328-nanopi-r2s.dts
index 1445b87..a4399da 100644
--- a/src/arm64/rockchip/rk3328-nanopi-r2s.dts
+++ b/src/arm64/rockchip/rk3328-nanopi-r2s.dts
@@ -14,6 +14,7 @@
 	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		ethernet1 = &rtl8153;
 		mmc0 = &sdmmc;
 	};
diff --git a/src/arm64/rockchip/rk3328-orangepi-r1-plus-lts.dts b/src/arm64/rockchip/rk3328-orangepi-r1-plus-lts.dts
index 5d7d567..4237f2e 100644
--- a/src/arm64/rockchip/rk3328-orangepi-r1-plus-lts.dts
+++ b/src/arm64/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -26,9 +26,11 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 
+			motorcomm,auto-sleep-disabled;
 			motorcomm,clk-out-frequency-hz = <125000000>;
 			motorcomm,keep-pll-enabled;
-			motorcomm,auto-sleep-disabled;
+			motorcomm,rx-clk-drv-microamp = <5020>;
+			motorcomm,rx-data-drv-microamp = <5020>;
 
 			pinctrl-0 = <&eth_phy_reset_pin>;
 			pinctrl-names = "default";
diff --git a/src/arm64/rockchip/rk3328-orangepi-r1-plus.dts b/src/arm64/rockchip/rk3328-orangepi-r1-plus.dts
index dc83d74..f206629 100644
--- a/src/arm64/rockchip/rk3328-orangepi-r1-plus.dts
+++ b/src/arm64/rockchip/rk3328-orangepi-r1-plus.dts
@@ -15,6 +15,7 @@
 	compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		ethernet1 = &rtl8153;
 		mmc0 = &sdmmc;
 	};
diff --git a/src/arm64/rockchip/rk3328-roc-cc.dts b/src/arm64/rockchip/rk3328-roc-cc.dts
index 5d5d957..414897a 100644
--- a/src/arm64/rockchip/rk3328-roc-cc.dts
+++ b/src/arm64/rockchip/rk3328-roc-cc.dts
@@ -11,6 +11,7 @@
 	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/src/arm64/rockchip/rk3328-rock-pi-e.dts b/src/arm64/rockchip/rk3328-rock-pi-e.dts
index 018a3a5..3cda6c6 100644
--- a/src/arm64/rockchip/rk3328-rock-pi-e.dts
+++ b/src/arm64/rockchip/rk3328-rock-pi-e.dts
@@ -21,6 +21,8 @@
 	compatible = "radxa,rockpi-e", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
+		ethernet1 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
@@ -180,6 +182,59 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_D0 - D7 */
+		"", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
+		"pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
+		"pin-33 [GPIO2_A6]", "",
+		/* GPIO2_B0 - B7 */
+		"", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
+		"pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
+		"pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
+		"", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
+		/* GPIO3_B0 - B7 */
+		"pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 
diff --git a/src/arm64/rockchip/rk3328-rock64.dts b/src/arm64/rockchip/rk3328-rock64.dts
index 0a27fa5..229fe9d 100644
--- a/src/arm64/rockchip/rk3328-rock64.dts
+++ b/src/arm64/rockchip/rk3328-rock64.dts
@@ -11,6 +11,7 @@
 	compatible = "pine64,rock64", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/src/arm64/rockchip/rk3328.dtsi b/src/arm64/rockchip/rk3328.dtsi
index cc82097..7b4c15c 100644
--- a/src/arm64/rockchip/rk3328.dtsi
+++ b/src/arm64/rockchip/rk3328.dtsi
@@ -20,6 +20,10 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -27,8 +31,6 @@
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
-		ethernet0 = &gmac2io;
-		ethernet1 = &gmac2phy;
 	};
 
 	cpus {
@@ -486,7 +488,6 @@
 	pwm3: pwm@ff1b0030 {
 		compatible = "rockchip,rk3328-pwm";
 		reg = <0x0 0xff1b0030 0x0 0x10>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -916,6 +917,8 @@
 		resets = <&cru SRST_GMAC2IO_A>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;
+		tx-fifo-depth = <2048>;
+		rx-fifo-depth = <4096>;
 		snps,txpbl = <0x4>;
 		status = "disabled";
 	};
@@ -938,6 +941,8 @@
 		reset-names = "stmmaceth";
 		phy-mode = "rmii";
 		phy-handle = <&phy>;
+		tx-fifo-depth = <2048>;
+		rx-fifo-depth = <4096>;
 		snps,txpbl = <0x4>;
 		clock_in_out = "output";
 		status = "disabled";
diff --git a/src/arm64/rockchip/rk3368-evb.dtsi b/src/arm64/rockchip/rk3368-evb.dtsi
index e47d139..b48b98c 100644
--- a/src/arm64/rockchip/rk3368-evb.dtsi
+++ b/src/arm64/rockchip/rk3368-evb.dtsi
@@ -9,6 +9,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git a/src/arm64/rockchip/rk3368-geekbox.dts b/src/arm64/rockchip/rk3368-geekbox.dts
index be06e6e..029b8e2 100644
--- a/src/arm64/rockchip/rk3368-geekbox.dts
+++ b/src/arm64/rockchip/rk3368-geekbox.dts
@@ -12,6 +12,7 @@
 	compatible = "geekbuying,geekbox", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git a/src/arm64/rockchip/rk3368-lion.dtsi b/src/arm64/rockchip/rk3368-lion.dtsi
index 5753e57..8ac8acf 100644
--- a/src/arm64/rockchip/rk3368-lion.dtsi
+++ b/src/arm64/rockchip/rk3368-lion.dtsi
@@ -8,6 +8,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git a/src/arm64/rockchip/rk3368-orion-r68-meta.dts b/src/arm64/rockchip/rk3368-orion-r68-meta.dts
index 81d1064..dcee2e2 100644
--- a/src/arm64/rockchip/rk3368-orion-r68-meta.dts
+++ b/src/arm64/rockchip/rk3368-orion-r68-meta.dts
@@ -12,6 +12,7 @@
 	compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/src/arm64/rockchip/rk3368-r88.dts b/src/arm64/rockchip/rk3368-r88.dts
index 5589f3d..b16b7ca 100644
--- a/src/arm64/rockchip/rk3368-r88.dts
+++ b/src/arm64/rockchip/rk3368-r88.dts
@@ -12,6 +12,7 @@
 	compatible = "rockchip,r88", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &emmc;
 	};
diff --git a/src/arm64/rockchip/rk3368.dtsi b/src/arm64/rockchip/rk3368.dtsi
index a4c5aaf..62af0cb 100644
--- a/src/arm64/rockchip/rk3368.dtsi
+++ b/src/arm64/rockchip/rk3368.dtsi
@@ -19,7 +19,10 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/src/arm64/rockchip/rk3399-eaidk-610.dts b/src/arm64/rockchip/rk3399-eaidk-610.dts
index 6464ef4..173da81 100644
--- a/src/arm64/rockchip/rk3399-eaidk-610.dts
+++ b/src/arm64/rockchip/rk3399-eaidk-610.dts
@@ -15,6 +15,7 @@
 	compatible = "openailab,eaidk-610", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/src/arm64/rockchip/rk3399-evb.dts b/src/arm64/rockchip/rk3399-evb.dts
index 3d1e126..55eca7a 100644
--- a/src/arm64/rockchip/rk3399-evb.dts
+++ b/src/arm64/rockchip/rk3399-evb.dts
@@ -12,6 +12,7 @@
 	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 	};
 
diff --git a/src/arm64/rockchip/rk3399-ficus.dts b/src/arm64/rockchip/rk3399-ficus.dts
index 1ce85a5..30e4879 100644
--- a/src/arm64/rockchip/rk3399-ficus.dts
+++ b/src/arm64/rockchip/rk3399-ficus.dts
@@ -13,6 +13,10 @@
 	model = "96boards RK3399 Ficus";
 	compatible = "vamrs,ficus", "rockchip,rk3399";
 
+	aliases {
+		ethernet0 = &gmac;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git a/src/arm64/rockchip/rk3399-firefly.dts b/src/arm64/rockchip/rk3399-firefly.dts
index c5db64f..260415d 100644
--- a/src/arm64/rockchip/rk3399-firefly.dts
+++ b/src/arm64/rockchip/rk3399-firefly.dts
@@ -16,6 +16,7 @@
 	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/src/arm64/rockchip/rk3399-gru-bob.dts b/src/arm64/rockchip/rk3399-gru-bob.dts
index 0f9cc04..1cba1d8 100644
--- a/src/arm64/rockchip/rk3399-gru-bob.dts
+++ b/src/arm64/rockchip/rk3399-gru-bob.dts
@@ -70,7 +70,7 @@
 &spi0 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio0>;
diff --git a/src/arm64/rockchip/rk3399-gru-scarlet.dtsi b/src/arm64/rockchip/rk3399-gru-scarlet.dtsi
index c5e7de6..5846a11 100644
--- a/src/arm64/rockchip/rk3399-gru-scarlet.dtsi
+++ b/src/arm64/rockchip/rk3399-gru-scarlet.dtsi
@@ -706,7 +706,7 @@
 &spi2 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
diff --git a/src/arm64/rockchip/rk3399-hugsun-x99.dts b/src/arm64/rockchip/rk3399-hugsun-x99.dts
index 7af27e8..4a6ab6c 100644
--- a/src/arm64/rockchip/rk3399-hugsun-x99.dts
+++ b/src/arm64/rockchip/rk3399-hugsun-x99.dts
@@ -11,6 +11,7 @@
 	compatible = "hugsun,x99", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/src/arm64/rockchip/rk3399-khadas-edge-captain.dts b/src/arm64/rockchip/rk3399-khadas-edge-captain.dts
index 8302e51..99ac4ed 100644
--- a/src/arm64/rockchip/rk3399-khadas-edge-captain.dts
+++ b/src/arm64/rockchip/rk3399-khadas-edge-captain.dts
@@ -10,6 +10,10 @@
 / {
 	model = "Khadas Edge-Captain";
 	compatible = "khadas,edge-captain", "rockchip,rk3399";
+
+	aliases {
+		ethernet0 = &gmac;
+	};
 };
 
 &gmac {
diff --git a/src/arm64/rockchip/rk3399-khadas-edge-v.dts b/src/arm64/rockchip/rk3399-khadas-edge-v.dts
index f5dcb99..e12e7b4 100644
--- a/src/arm64/rockchip/rk3399-khadas-edge-v.dts
+++ b/src/arm64/rockchip/rk3399-khadas-edge-v.dts
@@ -10,6 +10,10 @@
 / {
 	model = "Khadas Edge-V";
 	compatible = "khadas,edge-v", "rockchip,rk3399";
+
+	aliases {
+		ethernet0 = &gmac;
+	};
 };
 
 &gmac {
diff --git a/src/arm64/rockchip/rk3399-kobol-helios64.dts b/src/arm64/rockchip/rk3399-kobol-helios64.dts
index 1eb287a..9e3aec4 100644
--- a/src/arm64/rockchip/rk3399-kobol-helios64.dts
+++ b/src/arm64/rockchip/rk3399-kobol-helios64.dts
@@ -19,6 +19,7 @@
 	compatible = "kobol,helios64", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 		spi1 = &spi1;
diff --git a/src/arm64/rockchip/rk3399-leez-p710.dts b/src/arm64/rockchip/rk3399-leez-p710.dts
index a21ac31..cb69e21 100644
--- a/src/arm64/rockchip/rk3399-leez-p710.dts
+++ b/src/arm64/rockchip/rk3399-leez-p710.dts
@@ -15,6 +15,7 @@
 	compatible = "leez,p710", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/src/arm64/rockchip/rk3399-nanopi4.dtsi b/src/arm64/rockchip/rk3399-nanopi4.dtsi
index 7c5f441..b7f1e47 100644
--- a/src/arm64/rockchip/rk3399-nanopi4.dtsi
+++ b/src/arm64/rockchip/rk3399-nanopi4.dtsi
@@ -18,6 +18,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/src/arm64/rockchip/rk3399-orangepi.dts b/src/arm64/rockchip/rk3399-orangepi.dts
index dba4d03..e755144 100644
--- a/src/arm64/rockchip/rk3399-orangepi.dts
+++ b/src/arm64/rockchip/rk3399-orangepi.dts
@@ -17,6 +17,7 @@
 	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/src/arm64/rockchip/rk3399-puma-haikou.dts b/src/arm64/rockchip/rk3399-puma-haikou.dts
index 115c14c..18a98c4 100644
--- a/src/arm64/rockchip/rk3399-puma-haikou.dts
+++ b/src/arm64/rockchip/rk3399-puma-haikou.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "rk3399-puma.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Theobroma Systems RK3399-Q7 SoM";
@@ -18,6 +19,38 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&haikou_keys_pin>;
+		pinctrl-names = "default";
+
+		button-batlow-n {
+			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+		};
+
+		button-slp-btn-n {
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+		};
+
+		button-wake-n {
+			gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
 	leds {
 		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
 
@@ -165,11 +198,8 @@
 };
 
 &pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&haikou_pin_hog>;
-
-	hog {
-		haikou_pin_hog: haikou-pin-hog {
+	buttons {
+		haikou_keys_pin: haikou-keys-pin {
 			rockchip,pins =
 			  /* LID_BTN */
 			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
@@ -177,7 +207,7 @@
 			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
 			  /* SLP_BTN# */
 			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
-			  /* BIOS_DISABLE# */
+			  /* WAKE# */
 			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
diff --git a/src/arm64/rockchip/rk3399-puma.dtsi b/src/arm64/rockchip/rk3399-puma.dtsi
index 20e3f41..c08e693 100644
--- a/src/arm64/rockchip/rk3399-puma.dtsi
+++ b/src/arm64/rockchip/rk3399-puma.dtsi
@@ -9,6 +9,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 	};
 
@@ -119,6 +120,20 @@
 	drive-impedance-ohm = <33>;
 };
 
+&gpio0 {
+	/*
+	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+	 * signal. This usually represents the state of a switch on the baseboard.
+	 * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed.
+	 */
+	bios-disable-hog {
+		gpios = <RK_PB0 GPIO_ACTIVE_HIGH>;
+		gpio-hog;
+		input;
+		line-name = "bios_disable";
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
diff --git a/src/arm64/rockchip/rk3399-roc-pc.dtsi b/src/arm64/rockchip/rk3399-roc-pc.dtsi
index c32913d..ca7a446 100644
--- a/src/arm64/rockchip/rk3399-roc-pc.dtsi
+++ b/src/arm64/rockchip/rk3399-roc-pc.dtsi
@@ -14,6 +14,7 @@
 	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 	};
diff --git a/src/arm64/rockchip/rk3399-rock-4c-plus.dts b/src/arm64/rockchip/rk3399-rock-4c-plus.dts
index 8bfd5f8..7baf9d1 100644
--- a/src/arm64/rockchip/rk3399-rock-4c-plus.dts
+++ b/src/arm64/rockchip/rk3399-rock-4c-plus.dts
@@ -15,6 +15,7 @@
 	compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git a/src/arm64/rockchip/rk3399-rock-pi-4.dtsi b/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
index f2279aa..281a121 100644
--- a/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
+++ b/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git a/src/arm64/rockchip/rk3399-rockpro64.dtsi b/src/arm64/rockchip/rk3399-rockpro64.dtsi
index bca2b50..f30b82a 100644
--- a/src/arm64/rockchip/rk3399-rockpro64.dtsi
+++ b/src/arm64/rockchip/rk3399-rockpro64.dtsi
@@ -11,6 +11,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/src/arm64/rockchip/rk3399-sapphire.dtsi b/src/arm64/rockchip/rk3399-sapphire.dtsi
index e6ac292..b3ef1c8 100644
--- a/src/arm64/rockchip/rk3399-sapphire.dtsi
+++ b/src/arm64/rockchip/rk3399-sapphire.dtsi
@@ -12,6 +12,7 @@
 	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 	};
@@ -44,7 +45,7 @@
 	fan0: gpio-fan {
 		#cooling-cells = <2>;
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 3000 1>;
+		gpio-fan,speed-map = <0 0>, <3000 1>;
 		gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
diff --git a/src/arm64/rockchip/rk3399.dtsi b/src/arm64/rockchip/rk3399.dtsi
index da0dfb2..6e12c5a 100644
--- a/src/arm64/rockchip/rk3399.dtsi
+++ b/src/arm64/rockchip/rk3399.dtsi
@@ -19,7 +19,11 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -2114,6 +2118,7 @@
 		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		#cooling-cells = <2>;
+		dynamic-power-coefficient = <2640>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
 	};
diff --git a/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi b/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi
index 8b8992a..8823c92 100644
--- a/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi
@@ -13,6 +13,7 @@
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git a/src/arm64/rockchip/rk3566-lubancat-1.dts b/src/arm64/rockchip/rk3566-lubancat-1.dts
index 1c6d83b..6ecdf5d 100644
--- a/src/arm64/rockchip/rk3566-lubancat-1.dts
+++ b/src/arm64/rockchip/rk3566-lubancat-1.dts
@@ -455,7 +455,7 @@
 &pinctrl {
 	leds {
 		sys_led_pin: sys-status-led-pin {
-			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
diff --git a/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts b/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
index 1ead3c5..0ac64f0 100644
--- a/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
+++ b/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
@@ -5,67 +5,11 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3566-anbernic-rg353x.dtsi"
+#include "rk3566-powkiddy-rk2023.dtsi"
 
 / {
 	model = "RGB30";
 	compatible = "powkiddy,rgb30", "rockchip,rk3566";
-
-	aliases {
-		mmc1 = &sdmmc0;
-		mmc2 = &sdmmc1;
-		mmc3 = &sdmmc2;
-	};
-
-	battery: battery {
-		compatible = "simple-battery";
-		charge-full-design-microamp-hours = <3151000>;
-		charge-term-current-microamp = <300000>;
-		constant-charge-current-max-microamp = <2000000>;
-		constant-charge-voltage-max-microvolt = <4250000>;
-		factory-internal-resistance-micro-ohms = <117000>;
-		voltage-max-design-microvolt = <4172000>;
-		voltage-min-design-microvolt = <3400000>;
-
-		ocv-capacity-celsius = <20>;
-		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
-					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
-					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
-					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
-					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
-					<3400000 0>;
-	};
-
-	/*
-	 * Channels reversed for speakers. Headphones automatically switch via hardware when
-	 * detected with no ability to control output in software. Headphones appear to be mono
-	 * (each output channel receives all audio). No microphone support on 3.5mm jack.
-	 */
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "rk817_ext";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphones";
-		simple-audio-card,routing =
-			"Headphones", "HPOL",
-			"Headphones", "HPOR";
-
-		simple-audio-card,codec {
-			sound-dai = <&rk817>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s1_8ch>;
-		};
-	};
-};
-
-/delete-node/ &adc_keys;
-
-&chosen {
-	/delete-property/ stdout-path;
 };
 
 &cru {
@@ -75,87 +19,21 @@
 			       <200000000>, <292500000>;
 };
 
-&gpio_keys_control {
-	button-r1 {
-		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
-		label = "TR";
-		linux,code = <BTN_TR>;
-	};
-
-	button-r2 {
-		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
-		label = "TR2";
-		linux,code = <BTN_TR2>;
-	};
-};
+&dsi0 {
+	panel: panel@0 {
+		compatible = "powkiddy,rgb30-panel";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc3v3_lcd0_n>;
+		iovcc-supply = <&vcc3v3_lcd0_n>;
 
-/delete-node/ &{/i2c@fdd40000/regulator@40};
-
-&i2c0 {
-	vdd_cpu: regulator@1c {
-		compatible = "tcs,tcs4525";
-		reg = <0x1c>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1390000>;
-		regulator-name = "vdd_cpu";
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc_sys>;
-		regulator-state-mem {
-			regulator-off-in-suspend;
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
 		};
 	};
-};
-
-/*
- * Device has 2 red LEDs instead of an amber and a red. Relabel LEDs as
- * red_led0 and red_led1.
- */
-/delete-node/ &{/pwm-leds/led-1};
-/delete-node/ &{/pwm-leds/led-2};
-
-&leds {
-	red_led0: led-1 {
-		color = <LED_COLOR_ID_RED>;
-		function = LED_FUNCTION_CHARGING;
-		max-brightness = <255>;
-		pwms = <&pwm7 0 25000 0>;
-	};
-
-	red_led1: led-2 {
-		color = <LED_COLOR_ID_RED>;
-		default-state = "off";
-		function = LED_FUNCTION_STATUS;
-		max-brightness = <255>;
-		pwms = <&pwm0 0 25000 0>;
-	};
-};
-
-&panel {
-	compatible = "powkiddy,rgb30-panel";
-	vcc-supply = <&vcc3v3_lcd0_n>;
-	iovcc-supply = <&vcc3v3_lcd0_n>;
-	/delete-property/ vdd-supply;
 };
-
-&pwm5 {
-	status = "disabled";
-};
-
-&rk817 {
-	rk817_charger: charger {
-		monitored-battery = <&battery>;
-		rockchip,resistor-sense-micro-ohms = <10000>;
-		rockchip,sleep-enter-current-microamp = <300000>;
-		rockchip,sleep-filter-current-microamp = <100000>;
-	};
-};
-
-/* There is no UART header visible on the board for this device. */
-&uart2 {
-	status = "disabled";
-};
-
-/delete-node/ &vibrator;
diff --git a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
new file mode 100644
index 0000000..ba32d07
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+	model = "RK2023";
+	compatible = "powkiddy,rk2023", "rockchip,rk3566";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			  <200000000>, <115200000>;
+};
+
+&dsi0 {
+	panel: panel@0 {
+		compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
diff --git a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
new file mode 100644
index 0000000..0fa8f06
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
@@ -0,0 +1,875 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4250000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
+					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
+					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
+					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
+					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-up {
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	/*
+	 * Device also includes an always on LED that is wired to the 5V input
+	 * voltage and is on when the device is plugged in.
+	 */
+	leds: pwm-leds {
+		compatible = "pwm-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+			pwms = <&pwm6 0 25000 0>;
+		};
+
+		red_led: led-1 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_CHARGING;
+			max-brightness = <255>;
+			pwms = <&pwm7 0 25000 0>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	/*
+	 * Channels reversed for speakers. Headphones automatically switch via hardware when
+	 * detected with no ability to control output in software. Headphones appear to be mono
+	 * (each output channel receives all audio). No microphone support on 3.5mm jack.
+	 */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&vcc_lcd_h>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_lcd0_n";
+		vin-supply = <&vcc_3v3>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-btns {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joy-mux {
+		joy_mux_en: joy-mux-en {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc3v3-lcd {
+		vcc_lcd_h: vcc-lcd-h {
+			rockchip,pins =
+				<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc1v8_dvp>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb_host0_xhci {
+	dr_mode = "peripheral";
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/src/arm64/rockchip/rk3566-powkiddy-x55.dts b/src/arm64/rockchip/rk3566-powkiddy-x55.dts
new file mode 100644
index 0000000..4786b19
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-powkiddy-x55.dts
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Powkiddy x55";
+	compatible = "powkiddy,x55", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
+		mmc3 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc_joystick: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>,
+			      <&saradc 2>, <&saradc 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		factory-internal-resistance-micro-ohms = <91000>;
+		voltage-max-design-microvolt = <4138000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
+					<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
+					<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
+					<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
+					<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-up {
+			gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-voldown {
+			gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		red_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		amber_led: led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_host_en>;
+		pinctrl-names = "default";
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&dcdc_boost>;
+	};
+
+	vcc_lcd: regulator-vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_lcd_en>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_lcd";
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <126400000>;
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "powkiddy,x55-panel", "himax,hx8394";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vcc-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <150000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
+		    <&i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-control {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hp-detect {
+		hp_det: hp-det {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins =
+				<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vcc-lcd {
+		vcc_lcd_en: vcc-lcd-en {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc2v8_dvp>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+		    <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
+		    <&sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
+		    <&sdmmc2m1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc2v8_dvp>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/src/arm64/rockchip/rk3566-quartz64-a.dts b/src/arm64/rockchip/rk3566-quartz64-a.dts
index 854d02b4..59843a7 100644
--- a/src/arm64/rockchip/rk3566-quartz64-a.dts
+++ b/src/arm64/rockchip/rk3566-quartz64-a.dts
@@ -31,8 +31,9 @@
 	fan: gpio_fan {
 		compatible = "gpio-fan";
 		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      4500 1>;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<4500 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fan_en_h>;
 		#cooling-cells = <2>;
diff --git a/src/arm64/rockchip/rk3566-radxa-cm3-io.dts b/src/arm64/rockchip/rk3566-radxa-cm3-io.dts
index 1b1c67d..3ae24e3 100644
--- a/src/arm64/rockchip/rk3566-radxa-cm3-io.dts
+++ b/src/arm64/rockchip/rk3566-radxa-cm3-io.dts
@@ -14,6 +14,7 @@
 	compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc1 = &sdmmc0;
 	};
 
diff --git a/src/arm64/rockchip/rk3566-roc-pc.dts b/src/arm64/rockchip/rk3566-roc-pc.dts
index 938092f..63eea27 100644
--- a/src/arm64/rockchip/rk3566-roc-pc.dts
+++ b/src/arm64/rockchip/rk3566-roc-pc.dts
@@ -12,6 +12,7 @@
 	compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 		mmc2 = &sdmmc1;
diff --git a/src/arm64/rockchip/rk3566-soquartz-blade.dts b/src/arm64/rockchip/rk3566-soquartz-blade.dts
index 4e49beb..fdbf1c7 100644
--- a/src/arm64/rockchip/rk3566-soquartz-blade.dts
+++ b/src/arm64/rockchip/rk3566-soquartz-blade.dts
@@ -13,6 +13,10 @@
 	model = "PINE64 RK3566 SOQuartz on Blade carrier board";
 	compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
 	vcc3v0_sd: vcc3v0-sd-regulator {
 		compatible = "regulator-fixed";
diff --git a/src/arm64/rockchip/rk3566-soquartz-cm4.dts b/src/arm64/rockchip/rk3566-soquartz-cm4.dts
index cddf6cd..6ed3fa4 100644
--- a/src/arm64/rockchip/rk3566-soquartz-cm4.dts
+++ b/src/arm64/rockchip/rk3566-soquartz-cm4.dts
@@ -8,6 +8,10 @@
 	model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
 	compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled +12v in schematic */
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
diff --git a/src/arm64/rockchip/rk3566-soquartz-model-a.dts b/src/arm64/rockchip/rk3566-soquartz-model-a.dts
index 2208dbf..f2095df 100644
--- a/src/arm64/rockchip/rk3566-soquartz-model-a.dts
+++ b/src/arm64/rockchip/rk3566-soquartz-model-a.dts
@@ -8,6 +8,10 @@
 	model = "PINE64 RK3566 SOQuartz on Model A carrier board";
 	compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled DCIN_12V in schematic */
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
diff --git a/src/arm64/rockchip/rk3566-soquartz.dtsi b/src/arm64/rockchip/rk3566-soquartz.dtsi
index 63bae36..bfb7b95 100644
--- a/src/arm64/rockchip/rk3566-soquartz.dtsi
+++ b/src/arm64/rockchip/rk3566-soquartz.dtsi
@@ -12,7 +12,6 @@
 	compatible = "pine64,soquartz", "rockchip,rk3566";
 
 	aliases {
-		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 		mmc2 = &sdmmc1;
diff --git a/src/arm64/rockchip/rk3588-coolpi-cm5-evb.dts b/src/arm64/rockchip/rk3588-coolpi-cm5-evb.dts
new file mode 100644
index 0000000..a4946cd
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+	model = "RK3588 CoolPi CM5 EVB";
+	compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_lcd: vcc3v3-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdpwr_en>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+/* M.2 E-Key */
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+/* Standard pcie */
+&pcie3x2 {
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+/* M.2 M-Key ssd */
+&pcie3x4 {
+	num-lanes = <2>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pinctrl {
+	lcd {
+		lcdpwr_en: lcdpwr-en {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bl_en: bl-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		bt_pwron: bt-pwron {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_clkreq: pcie-clkreq {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_rst: pcie-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_pwron: wifi-pwron {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_wake: pcie-wake {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb_host1>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb_host2>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi b/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
new file mode 100644
index 0000000..cce1c8e
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "coolpi,pi-cm5", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+		serial2 = &uart2;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	avdd0v75_pcie30: avdd0v75-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v75_pcie30";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	pcie30_avdd1v8: avdd1v8-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* YT8531C/H */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&yt8531_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* ethernet */
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&yt6801_isolate>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt6801 {
+		yt6801_isolate: yt6801-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt8531 {
+		yt8531_rst: yt8531-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_2v0_pldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts b/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts
index b515438..be6a4f4 100644
--- a/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts
@@ -12,10 +12,6 @@
 	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6a", "rockchip,rk3588";
 
-	aliases {
-		serial2 = &uart2;
-	};
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts b/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts
index 9933765..070baeb 100644
--- a/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts
@@ -9,13 +9,9 @@
 
 / {
 	model = "Edgeble Neu6B IO Board";
-	compatible = "edgeble,neural-compute-module-6b-io",
+	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6b", "rockchip,rk3588";
 
-	aliases {
-		serial2 = &uart2;
-	};
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git a/src/arm64/rockchip/rk3588-evb1-v10.dts b/src/arm64/rockchip/rk3588-evb1-v10.dts
index b9d789d..de30c26 100644
--- a/src/arm64/rockchip/rk3588-evb1-v10.dts
+++ b/src/arm64/rockchip/rk3588-evb1-v10.dts
@@ -16,8 +16,8 @@
 	compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
 
 	aliases {
+		ethernet0 = &gmac0;
 		mmc0 = &sdhci;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -56,6 +56,63 @@
 		};
 	};
 
+	analog-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+		simple-audio-card,name = "RK3588 EVB1 Audio";
+		simple-audio-card,aux-devs = <&amp_headphone>, <&amp_speaker>;
+		simple-audio-card,bitclock-master = <&masterdai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&masterdai>;
+		simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,pin-switches = "Headphones", "Speaker";
+		simple-audio-card,routing =
+			"Speaker Amplifier INL", "LOUT2",
+			"Speaker Amplifier INR", "ROUT2",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR",
+			"Headphones Amplifier INL", "LOUT1",
+			"Headphones Amplifier INR", "ROUT1",
+			"Headphones", "Headphones Amplifier OUTL",
+			"Headphones", "Headphones Amplifier OUTR",
+			"LINPUT1", "Onboard Microphone",
+			"RINPUT1", "Onboard Microphone",
+			"LINPUT2", "Microphone Jack",
+			"RINPUT2", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Microphone", "Onboard Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+
+		masterdai: simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	amp_headphone: headphone-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&headphone_amplifier_en>;
+		sound-name-prefix = "Headphones Amplifier";
+	};
+
+	amp_speaker: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_amplifier_en>;
+		sound-name-prefix = "Speaker Amplifier";
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		power-supply = <&vcc12v_dcin>;
@@ -240,6 +297,32 @@
 	};
 };
 
+&i2c7 {
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		AVDD-supply = <&avcc_1v8_codec_s0>;
+		DVDD-supply = <&avcc_1v8_codec_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
 &mdio0 {
 	rgmii_phy: ethernet-phy@1 {
 		/* RTL8211F */
@@ -273,6 +356,20 @@
 };
 
 &pinctrl {
+	audio {
+		hp_detect: headphone-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		headphone_amplifier_en: headphone-amplifier-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		speaker_amplifier_en: speaker-amplifier-en {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	rtl8111 {
 		rtl8111_isolate: rtl8111-isolate {
 			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -351,6 +448,7 @@
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
diff --git a/src/arm64/rockchip/rk3588-jaguar.dts b/src/arm64/rockchip/rk3588-jaguar.dts
new file mode 100644
index 0000000..39d6500
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-jaguar.dts
@@ -0,0 +1,802 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3588-SBC Jaguar";
+	compatible = "tsd,rk3588-jaguar", "rockchip,rk3588";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		/* Can be controlled through SW2 but also GPIO1 on CP2102 on P20 */
+		button-bios-disable {
+			label = "BIOS_DISABLE";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		rtc0 = &rtc_twi;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	/* DCIN is 12-24V but standard is 12V */
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led1_pin>;
+
+		/* LED1 on PCB */
+		led-1 {
+			gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v2_s3: vcc-1v2-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v2_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Exposed on P14 and P15 */
+	vcc_2v8_s3: vcc-2v8-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_5v0_usb_a: vcc-5v0-usb-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_a_vcc";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+		gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v0_usb_c1: vcc-5v0-usb-c1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_usbc1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v0_usb_c2: vcc-5v0-usb-c2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_usbc2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+		gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc3v3_mdot2: vcc3v3-mdot2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_mdot2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_1v2_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_rx_bus2
+		     &gmac0_tx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus
+		     &eth0_pins
+		     &eth_reset>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 100000>;
+
+	status = "okay";
+};
+
+&gpio1 {
+	mdot2e-w-disable1-n-hog {
+		gpios = <RK_PB1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m.2 E-key W_DISABLE1#";
+		gpio-hog;
+	};
+};
+
+&gpio4 {
+	mdot2e-w-disable2-n-hog {
+		gpios = <RK_PC1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m.2 E-key W_DISABLE2#";
+		gpio-hog;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1m4_xfer>;
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m4_xfer>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* SE050 Secure Element at 0x48; GPIO1_A4 for enable pin */
+
+	/* Also on 0x55 */
+	eeprom@54 {
+		compatible = "st,24c04", "atmel,24c04";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&i2c8 {
+	pinctrl-0 = <&i2c8m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@6 {
+		/* KSZ9031 or KSZ9131 */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x6>;
+		clocks = <&cru REFCLKO25M_ETH0_OUT>;
+	};
+};
+
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; /* WIFI_PERST0# */
+	vpcie3v3-supply = <&vcc3v3_mdot2>;
+	status = "okay";
+};
+
+&pinctrl {
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		eth_reset: eth-reset {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led1_pin: led1-pin {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
+	supports-cqe;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-name = "vcca_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-name = "vdda_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-name = "vcca_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg3 {
+				regulator-name = "vdda_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-name = "vdda_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc_5v0_usb_a>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+/* Mule-ATtiny debug UART; typically baudrate 9600 */
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+/* Main debug interface on P20 micro-USB B port and P21 header */
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* RS485 on P19 */
+&uart3 {
+	pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* Mule-ATtiny UPDI flashing UART */
+&uart7 {
+	pinctrl-0 = <&uart7m0_xfer>;
+	status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ehci {
+	status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588-nanopc-t6.dts b/src/arm64/rockchip/rk3588-nanopc-t6.dts
index 97af4f9..997b516 100644
--- a/src/arm64/rockchip/rk3588-nanopc-t6.dts
+++ b/src/arm64/rockchip/rk3588-nanopc-t6.dts
@@ -19,7 +19,6 @@
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -190,19 +189,19 @@
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
-&cpu_b0{
+&cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
 
-&cpu_b1{
+&cpu_b1 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
 
-&cpu_b2{
+&cpu_b2 {
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
-&cpu_b3{
+&cpu_b3 {
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
@@ -537,13 +536,12 @@
 };
 
 &sdmmc {
-	max-frequency = <200000000>;
-	no-sdio;
-	no-mmc;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	disable-wp;
+	no-mmc;
+	no-sdio;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vccio_sd_s0>;
@@ -570,6 +568,8 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		system-power-controller;
+
 		vcc1-supply = <&vcc4v0_sys>;
 		vcc2-supply = <&vcc4v0_sys>;
 		vcc3-supply = <&vcc4v0_sys>;
@@ -590,7 +590,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
diff --git a/src/arm64/rockchip/rk3588-orangepi-5-plus.dts b/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
index 298c183..3e660ff 100644
--- a/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
+++ b/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
@@ -19,7 +19,6 @@
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git a/src/arm64/rockchip/rk3588-quartzpro64.dts b/src/arm64/rockchip/rk3588-quartzpro64.dts
index 5c59f95..87a0abf 100644
--- a/src/arm64/rockchip/rk3588-quartzpro64.dts
+++ b/src/arm64/rockchip/rk3588-quartzpro64.dts
@@ -17,9 +17,9 @@
 	compatible = "pine64,quartzpro64", "rockchip,rk3588";
 
 	aliases {
+		ethernet0 = &gmac0;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git a/src/arm64/rockchip/rk3588-rock-5b.dts b/src/arm64/rockchip/rk3588-rock-5b.dts
index 741f631..a0e303c 100644
--- a/src/arm64/rockchip/rk3588-rock-5b.dts
+++ b/src/arm64/rockchip/rk3588-rock-5b.dts
@@ -14,7 +14,6 @@
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -138,6 +137,10 @@
 	status = "okay";
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
@@ -423,6 +426,8 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		system-power-controller;
+
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
 		vcc3-supply = <&vcc5v0_sys>;
@@ -443,7 +448,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
@@ -765,3 +770,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588-turing-rk1.dtsi b/src/arm64/rockchip/rk3588-turing-rk1.dtsi
index d88c0e8..dc08da5 100644
--- a/src/arm64/rockchip/rk3588-turing-rk1.dtsi
+++ b/src/arm64/rockchip/rk3588-turing-rk1.dtsi
@@ -19,8 +19,6 @@
 	aliases {
 		ethernet0 = &gmac1;
 		mmc0 = &sdhci;
-		serial2 = &uart2;
-		serial9 = &uart9;
 	};
 
 	fan: pwm-fan {
diff --git a/src/arm64/rockchip/rk3588s-coolpi-4b.dts b/src/arm64/rockchip/rk3588s-coolpi-4b.dts
new file mode 100644
index 0000000..e037bf9
--- /dev/null
+++ b/src/arm64/rockchip/rk3588s-coolpi-4b.dts
@@ -0,0 +1,812 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "RK3588S CoolPi 4 Model B";
+	compatible = "coolpi,pi-4b", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds>;
+
+		led0: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-red {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	vcc3v3_mipi: vcc3v3-mipi-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_mipi";
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_u3host_en>;
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtl8111_isolate>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	led {
+		gpio_leds: gpio-leds {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>,
+					<0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	rtl8111 {
+		rtl8111_isolate: rtl8111-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_u3host_en: vcc5v0-u3host-en {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_reset_gpio: bt-reset-pin {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_gpio: bt-wake-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_irq: bt-wake-host-irq {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wireless-wlan {
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		wifi_poweren_pin: wifi-poweren-pin {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2m1_pins>;
+	status = "okay";
+};
+
+&pwm13 {
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm13m2_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* bt */
+&uart9 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588s-indiedroid-nova.dts b/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
index 60f00ce..3c22788 100644
--- a/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
+++ b/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
@@ -44,7 +44,6 @@
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -196,13 +195,13 @@
 
 &gpio1 {
 	gpio-line-names = /* GPIO1 A0-A7 */
-			  "HEADER_27_3v3", "HEADER_28_3v3", "", "",
+			  "HEADER_27_3v3", "", "", "",
 			  "HEADER_29_1v8", "", "HEADER_7_1v8", "",
 			  /* GPIO1 B0-B7 */
 			  "", "HEADER_31_1v8", "HEADER_33_1v8", "",
 			  "HEADER_11_1v8", "HEADER_13_1v8", "", "",
 			  /* GPIO1 C0-C7 */
-			  "", "", "", "",
+			  "", "HEADER_28_3v3", "", "",
 			  "", "", "", "",
 			  /* GPIO1 D0-D7 */
 			  "", "", "", "",
@@ -226,11 +225,11 @@
 
 &gpio4 {
 	gpio-line-names = /* GPIO4 A0-A7 */
-			  "", "", "HEADER_37_3v3", "HEADER_32_3v3",
-			  "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
+			  "", "", "HEADER_37_3v3", "HEADER_8_3v3",
+			  "HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3",
 			  /* GPIO4 B0-B7 */
 			  "", "", "", "HEADER_40_3v3",
-			  "HEADER_8_3v3", "HEADER_10_3v3", "", "",
+			  "HEADER_38_3v3", "HEADER_36_3v3", "", "",
 			  /* GPIO4 C0-C7 */
 			  "", "", "", "",
 			  "", "", "", "",
diff --git a/src/arm64/rockchip/rk3588s-khadas-edge2.dts b/src/arm64/rockchip/rk3588s-khadas-edge2.dts
index 82478a4..f53e993 100644
--- a/src/arm64/rockchip/rk3588s-khadas-edge2.dts
+++ b/src/arm64/rockchip/rk3588s-khadas-edge2.dts
@@ -12,7 +12,6 @@
 
 	aliases {
 		mmc0 = &sdhci;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git a/src/arm64/rockchip/rk3588s-orangepi-5.dts b/src/arm64/rockchip/rk3588s-orangepi-5.dts
index e3a839a..25de436 100644
--- a/src/arm64/rockchip/rk3588s-orangepi-5.dts
+++ b/src/arm64/rockchip/rk3588s-orangepi-5.dts
@@ -13,8 +13,8 @@
 	compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -314,6 +314,7 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 				<&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
@@ -660,3 +661,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588s-rock-5a.dts b/src/arm64/rockchip/rk3588s-rock-5a.dts
index 8347adc..2002fd0 100644
--- a/src/arm64/rockchip/rk3588s-rock-5a.dts
+++ b/src/arm64/rockchip/rk3588s-rock-5a.dts
@@ -12,9 +12,9 @@
 	compatible = "radxa,rock-5a", "rockchip,rk3588s";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	analog-sound {
@@ -114,6 +114,10 @@
 	};
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
@@ -734,3 +738,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588s.dtsi b/src/arm64/rockchip/rk3588s.dtsi
index 8aa0499..36b1b7a 100644
--- a/src/arm64/rockchip/rk3588s.dtsi
+++ b/src/arm64/rockchip/rk3588s.dtsi
@@ -18,6 +18,38 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+		serial8 = &uart8;
+		serial9 = &uart9;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -362,6 +394,11 @@
 		#clock-cells = <0>;
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -474,6 +511,16 @@
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
 	};
 
+	vop_grf: syscon@fd5a4000 {
+		compatible = "rockchip,rk3588-vop-grf", "syscon";
+		reg = <0x0 0xfd5a4000 0x0 0x2000>;
+	};
+
+	vo1_grf: syscon@fd5a8000 {
+		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x100>;
+	};
+
 	php_grf: syscon@fd5b0000 {
 		compatible = "rockchip,rk3588-php-grf", "syscon";
 		reg = <0x0 0xfd5b0000 0x0 0x1000>;
@@ -593,6 +640,74 @@
 		status = "disabled";
 	};
 
+	vop: vop@fdd90000 {
+		compatible = "rockchip,rk3588-vop";
+		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+		reg-names = "vop", "gamma-lut";
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>,
+			 <&cru HCLK_VOP>,
+			 <&cru DCLK_VOP0>,
+			 <&cru DCLK_VOP1>,
+			 <&cru DCLK_VOP2>,
+			 <&cru DCLK_VOP3>,
+			 <&cru PCLK_VOP_ROOT>;
+		clock-names = "aclk",
+			      "hclk",
+			      "dclk_vp0",
+			      "dclk_vp1",
+			      "dclk_vp2",
+			      "dclk_vp3",
+			      "pclk_vop";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3588_PD_VOP>;
+		rockchip,grf = <&sys_grf>;
+		rockchip,vop-grf = <&vop_grf>;
+		rockchip,vo1-grf = <&vo1_grf>;
+		rockchip,pmu = <&pmu>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+			};
+
+			vp1: port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+
+			vp2: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+			};
+
+			vp3: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fdd97e00 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_VOP>;
+		status = "disabled";
+	};
+
 	uart0: serial@fd890000 {
 		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xfd890000 0x0 0x100>;
@@ -916,6 +1031,7 @@
 				reg = <RK3588_PD_USB>;
 				clocks = <&cru PCLK_PHP_ROOT>,
 					 <&cru ACLK_USB_ROOT>,
+					 <&cru ACLK_USB>,
 					 <&cru HCLK_USB_ROOT>,
 					 <&cru HCLK_HOST0>,
 					 <&cru HCLK_HOST_ARB0>,
diff --git a/src/arm64/sprd/ums512.dtsi b/src/arm64/sprd/ums512.dtsi
index 024be59..dbdb79f 100644
--- a/src/arm64/sprd/ums512.dtsi
+++ b/src/arm64/sprd/ums512.dtsi
@@ -96,7 +96,7 @@
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a55";
+			compatible = "arm,cortex-a75";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			cpu-idle-states = <&CORE_PD>;
@@ -104,7 +104,7 @@
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a55";
+			compatible = "arm,cortex-a75";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			cpu-idle-states = <&CORE_PD>;
@@ -113,7 +113,7 @@
 
 	idle-states {
 		entry-method = "psci";
-		CORE_PD: core-pd {
+		CORE_PD: cpu-pd {
 			compatible = "arm,idle-state";
 			entry-latency-us = <4000>;
 			exit-latency-us = <4000>;
@@ -291,6 +291,7 @@
 			pll2: clock-controller@0 {
 				compatible = "sprd,ums512-gc-pll";
 				reg = <0x0 0x100>;
+				clocks = <&ext_26m>;
 				clock-names = "ext-26m";
 				#clock-cells = <1>;
 			};
@@ -682,8 +683,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f040000 0 0x1000>;
 			cpu = <&CPU0>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -699,8 +700,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f140000 0 0x1000>;
 			cpu = <&CPU1>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -716,8 +717,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f240000 0 0x1000>;
 			cpu = <&CPU2>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -733,8 +734,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f340000 0 0x1000>;
 			cpu = <&CPU3>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -750,8 +751,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f440000 0 0x1000>;
 			cpu = <&CPU4>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -767,8 +768,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f540000 0 0x1000>;
 			cpu = <&CPU5>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -784,8 +785,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f640000 0 0x1000>;
 			cpu = <&CPU6>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -801,8 +802,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f740000 0 0x1000>;
 			cpu = <&CPU7>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
diff --git a/src/arm64/sprd/ums9620-2h10.dts b/src/arm64/sprd/ums9620-2h10.dts
new file mode 100644
index 0000000..b356711
--- /dev/null
+++ b/src/arm64/sprd/ums9620-2h10.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620-2h10 board DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "ums9620.dtsi"
+
+/ {
+	model = "Unisoc UMS9620-2H10 Board";
+
+	compatible = "sprd,ums9620-2h10", "sprd,ums9620";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/src/arm64/sprd/ums9620.dtsi b/src/arm64/sprd/ums9620.dtsi
new file mode 100644
index 0000000..2191f0a
--- /dev/null
+++ b/src/arm64/sprd/ums9620.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620 DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		LIT_CORE_PD: cpu-pd-lit {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <500>;
+			min-residency-us = <2500>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+
+		BIG_CORE_PD: cpu-pd-big {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@12000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x12000000 0 0x20000>,	/* GICD */
+			      <0x0 0x12040000 0 0x100000>;	/* GICR */
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apb@20200000 {
+			compatible = "simple-bus";
+			ranges = <0 0 0x20200000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uart0: serial@0 {
+				compatible = "sprd,ums9620-uart",
+					     "sprd,sc9836-uart";
+				reg = <0 0x100>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@10000 {
+				compatible = "sprd,ums9620-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x10000 0x100>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: clk-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_4m: clk-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	ext_32k: clk-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	rco_100m: clk-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+
+	dphy_312m5: dphy-312m5 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <312500000>;
+		clock-output-names = "dphy-312m5";
+	};
+
+	dphy_416m7: dphy-416m7 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <416700000>;
+		clock-output-names = "dphy-416m7";
+	};
+};
diff --git a/src/arm64/st/stm32mp251.dtsi b/src/arm64/st/stm32mp251.dtsi
index 124403f..96859d0 100644
--- a/src/arm64/st/stm32mp251.dtsi
+++ b/src/arm64/st/stm32mp251.dtsi
@@ -140,6 +140,22 @@
 			};
 		};
 
+		bsec: efuse@44000000 {
+			compatible = "st,stm32mp25-bsec";
+			reg = <0x44000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			part_number_otp@24 {
+				reg = <0x24 0x4>;
+			};
+
+			package_otp@1e8 {
+				reg = <0x1e8 0x1>;
+				bits = <0 3>;
+			};
+		};
+
 		syscfg: syscon@44230000 {
 			compatible = "st,stm32mp25-syscfg", "syscon";
 			reg = <0x44230000 0x10000>;
diff --git a/src/arm64/tesla/fsd.dtsi b/src/arm64/tesla/fsd.dtsi
index bb50a9f..aaffb50 100644
--- a/src/arm64/tesla/fsd.dtsi
+++ b/src/arm64/tesla/fsd.dtsi
@@ -342,6 +342,18 @@
 		#clock-cells = <0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mfc_left: region@84000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0 0x84000000 0 0x8000000>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -581,7 +593,7 @@
 		};
 
 		serial_0: serial@14180000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
 			reg = <0x0 0x14180000 0x0 0x100>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 1>, <&pdma1 0>;
@@ -593,7 +605,7 @@
 		};
 
 		serial_1: serial@14190000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
 			reg = <0x0 0x14190000 0x0 0x100>;
 			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 3>, <&pdma1 2>;
@@ -605,12 +617,12 @@
 		};
 
 		pmu_system_controller: system-controller@11400000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "tesla,fsd-pmu", "samsung,exynos7-pmu", "syscon";
 			reg = <0x0 0x11400000 0x0 0x5000>;
 		};
 
 		watchdog_0: watchdog@100a0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100a0000 0x0 0x100>;
 			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -619,7 +631,7 @@
 		};
 
 		watchdog_1: watchdog@100b0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100b0000 0x0 0x100>;
 			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -628,7 +640,7 @@
 		};
 
 		watchdog_2: watchdog@100c0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100c0000 0x0 0x100>;
 			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -637,7 +649,7 @@
 		};
 
 		pwm_0: pwm@14100000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
 			reg = <0x0 0x14100000 0x0 0x100>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
@@ -647,7 +659,7 @@
 		};
 
 		pwm_1: pwm@14110000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
 			reg = <0x0 0x14110000 0x0 0x100>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
@@ -657,7 +669,7 @@
 		};
 
 		hsi2c_0: i2c@14200000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14200000 0x0 0x1000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -670,7 +682,7 @@
 		};
 
 		hsi2c_1: i2c@14210000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14210000 0x0 0x1000>;
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -683,7 +695,7 @@
 		};
 
 		hsi2c_2: i2c@14220000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14220000 0x0 0x1000>;
 			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -696,7 +708,7 @@
 		};
 
 		hsi2c_3: i2c@14230000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14230000 0x0 0x1000>;
 			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -709,7 +721,7 @@
 		};
 
 		hsi2c_4: i2c@14240000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14240000 0x0 0x1000>;
 			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -722,7 +734,7 @@
 		};
 
 		hsi2c_5: i2c@14250000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14250000 0x0 0x1000>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -735,7 +747,7 @@
 		};
 
 		hsi2c_6: i2c@14260000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14260000 0x0 0x1000>;
 			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -748,7 +760,7 @@
 		};
 
 		hsi2c_7: i2c@14270000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14270000 0x0 0x1000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -956,6 +968,15 @@
 			clock-names = "fin_pll", "mct";
 		};
 
+		mfc: mfc@12880000 {
+			compatible = "tesla,fsd-mfc";
+			reg = <0x0 0x12880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "mfc";
+			clocks = <&clock_mfc MFC_MFC_IPCLKPORT_ACLK>;
+			memory-region = <&mfc_left>;
+		};
+
 		ufs: ufs@15120000 {
 			compatible = "tesla,fsd-ufs";
 			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */
diff --git a/src/arm64/ti/k3-am62-main.dtsi b/src/arm64/ti/k3-am62-main.dtsi
index e5c64c8..464b756 100644
--- a/src/arm64/ti/k3-am62-main.dtsi
+++ b/src/arm64/ti/k3-am62-main.dtsi
@@ -121,8 +121,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -138,8 +143,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 
@@ -502,6 +512,9 @@
 	main_gpio0: gpio@600000 {
 		compatible = "ti,am64-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-ranges = <&main_pmx0  0  0 32>,
+			      <&main_pmx0 32 33 38>,
+			      <&main_pmx0 70 72 22>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
@@ -520,6 +533,10 @@
 		compatible = "ti,am64-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x00601000 0x0 0x100>;
 		gpio-controller;
+		gpio-ranges = <&main_pmx0  0  94 41>,
+			      <&main_pmx0 41 136  6>,
+			      <&main_pmx0 47 143  3>,
+			      <&main_pmx0 50 149  2>;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
 		interrupts = <180>, <181>, <182>,
@@ -675,6 +692,15 @@
 		};
 	};
 
+	gpu: gpu@fd00000 {
+		compatible = "ti,am62-gpu", "img,img-axe";
+		reg = <0x00 0x0fd00000 0x00 0x20000>;
+		clocks = <&k3_clks 187 0>;
+		clock-names = "core";
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+	};
+
 	cpsw3g: ethernet@8000000 {
 		compatible = "ti,am642-cpsw-nuss";
 		#address-cells = <2>;
@@ -965,4 +991,66 @@
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		dmas = <&main_bcdma 0 0x4700 0>;
+		dma-names = "rx0";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
 };
diff --git a/src/arm64/ti/k3-am62-verdin-dahlia.dtsi b/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
index 013357d..bf6d27e 100644
--- a/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
@@ -214,6 +214,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git a/src/arm64/ti/k3-am62-verdin-dev.dtsi b/src/arm64/ti/k3-am62-verdin-dev.dtsi
index 6701cb8..6800716 100644
--- a/src/arm64/ti/k3-am62-verdin-dev.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-dev.dtsi
@@ -235,6 +235,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git a/src/arm64/ti/k3-am62-verdin-mallow.dtsi b/src/arm64/ti/k3-am62-verdin-mallow.dtsi
new file mode 100644
index 0000000..17b9353
--- /dev/null
+++ b/src/arm64/ti/k3-am62-verdin-mallow.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETH */
+&cpsw3g {
+	status = "okay";
+};
+
+/* Verdin MDIO */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1*/
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 and PWM_2*/
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3 DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2 DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-0 = <&pinctrl_spi1>,
+		    <&pinctrl_spi1_cs0>,
+		    <&pinctrl_qspi1_cs2_gpio>;
+	cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git a/src/arm64/ti/k3-am62-verdin-yavia.dtsi b/src/arm64/ti/k3-am62-verdin-yavia.dtsi
index c685df7..997dfaf 100644
--- a/src/arm64/ti/k3-am62-verdin-yavia.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-yavia.dtsi
@@ -207,6 +207,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git a/src/arm64/ti/k3-am62-verdin.dtsi b/src/arm64/ti/k3-am62-verdin.dtsi
index 5db52f2..6a06724 100644
--- a/src/arm64/ti/k3-am62-verdin.dtsi
+++ b/src/arm64/ti/k3-am62-verdin.dtsi
@@ -233,6 +233,13 @@
 		>;
 	};
 
+	/* Verdin SPI_1 CS as GPIO */
+	pinctrl_qspi1_io4_gpio: main-gpio0-7-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 7) /* (J23) OSPI0_D4.GPIO0_7 */ /* SODIMM 202 */
+		>;
+	};
+
 	/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
 	pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins {
 		pinctrl-single,pins = <
@@ -599,12 +606,18 @@
 	pinctrl_spi1: main-spi1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */
-			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
 			AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0  */ /* SODIMM 200 */
 			AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1  */ /* SODIMM 198 */
 		>;
 	};
 
+	/* Verdin SPI_1 CS */
+	pinctrl_spi1_cs0: main-spi1-cs0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
+		>;
+	};
+
 	/* ETH_25MHz_CLK */
 	pinctrl_eth_clock: main-system-clkout0-default-pins {
 		pinctrl-single,pins = <
@@ -1278,7 +1291,7 @@
 /* Verdin SPI_1 */
 &main_spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1>;
+	pinctrl-0 = <&pinctrl_spi1>, <&pinctrl_spi1_cs0>;
 	ti,pindir-d0-out-d1-in;
 	status = "disabled";
 };
diff --git a/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso b/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso
new file mode 100644
index 0000000..5e80ca7
--- /dev/null
+++ b/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&main_gpio0 {
+	p11-hog {
+		/* P11 - CSI2_CAMERA_GPIO1 */
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "CSI2_CAMERA_GPIO1";
+	};
+};
+
+&wkup_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
diff --git a/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso b/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
new file mode 100644
index 0000000..5e1cbbc
--- /dev/null
+++ b/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_gpio0 {
+	p11-hog {
+		/* P11 - CSI2_CAMERA_GPIO1 */
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "CSI2_CAMERA_GPIO1";
+	};
+};
+
+&wkup_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
diff --git a/src/arm64/ti/k3-am625-beagleplay.dts b/src/arm64/ti/k3-am625-beagleplay.dts
index 9a6bd0a..eadbdd9 100644
--- a/src/arm64/ti/k3-am625-beagleplay.dts
+++ b/src/arm64/ti/k3-am625-beagleplay.dts
@@ -443,7 +443,7 @@
 		>;
 	};
 
-	console_pins_default: console-default-pins {
+	main_uart0_pins_default: main-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
@@ -877,7 +877,7 @@
 &main_uart0 {
 	bootph-all;
 	pinctrl-names = "default";
-	pinctrl-0 = <&console_pins_default>;
+	pinctrl-0 = <&main_uart0_pins_default>;
 	status = "okay";
 };
 
diff --git a/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts b/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
index a438baf..4bc0134 100644
--- a/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -35,6 +35,18 @@
 		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
 	};
 
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
 	keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -93,6 +105,37 @@
 		>;
 	};
 
+	hdmi_int_pins_default: hdmi-int-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
+		>;
+	};
+
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+		>;
+	};
+
 	main_i2c1_pins_default: main-i2c1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
@@ -184,10 +227,30 @@
 	};
 };
 
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+	status = "okay";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP2: DPI/HDMI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &main_i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 	status = "okay";
 
 	gpio_exp: gpio-expander@21 {
@@ -201,12 +264,43 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
+		gpio-line-names = "", "GPIO1_CAN0_nEN",
 				  "GPIO2_LED2", "GPIO3_LVDS_GPIO",
 				  "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
 				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
 	};
 
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_int_pins_default>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
 	eeprom@51 {
 		compatible = "atmel,24c02";
 		pagesize = <16>;
diff --git a/src/arm64/ti/k3-am625-verdin-nonwifi-mallow.dts b/src/arm64/ti/k3-am625-verdin-nonwifi-mallow.dts
new file mode 100644
index 0000000..9cae121
--- /dev/null
+++ b/src/arm64/ti/k3-am625-verdin-nonwifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Mallow Board";
+	compatible = "toradex,verdin-am62-nonwifi-mallow",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/src/arm64/ti/k3-am625-verdin-wifi-mallow.dts b/src/arm64/ti/k3-am625-verdin-wifi-mallow.dts
new file mode 100644
index 0000000..81d834b
--- /dev/null
+++ b/src/arm64/ti/k3-am625-verdin-wifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Mallow Board";
+	compatible = "toradex,verdin-am62-wifi-mallow",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/src/arm64/ti/k3-am62a-main.dtsi b/src/arm64/ti/k3-am62a-main.dtsi
index 4ae7fdc..f0b8c9a 100644
--- a/src/arm64/ti/k3-am62a-main.dtsi
+++ b/src/arm64/ti/k3-am62a-main.dtsi
@@ -101,8 +101,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 			ti,sci = <&dmsc>;
@@ -117,8 +122,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 			ti,sci = <&dmsc>;
@@ -144,6 +154,44 @@
 		};
 	};
 
+	dmss_csi: bus@4e000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>;
+
+		ti,sci-dev-id = <198>;
+
+		inta_main_dmss_csi: interrupt-controller@4e0a0000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x4e0a0000 0x00 0x8000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <200>;
+			ti,interrupt-ranges = <0 237 8>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		};
+
+		main_bcdma_csi: dma-controller@4e230000 {
+			compatible = "ti,am62a-dmss-bcdma-csirx";
+			reg = <0x00 0x4e230000 0x00 0x100>,
+			      <0x00 0x4e180000 0x00 0x8000>,
+			      <0x00 0x4e100000 0x00 0x10000>;
+			reg-names = "gcfg", "rchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss_csi>;
+			#dma-cells = <3>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <199>;
+			ti,sci-rm-range-rchan = <0x21>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		};
+	};
+
 	dmsc: system-controller@44043000 {
 		compatible = "ti,k2g-sci";
 		reg = <0x00 0x44043000 0x00 0xfe0>;
@@ -462,7 +510,7 @@
 			     <193>, <194>, <195>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <87>;
+		ti,ngpio = <92>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 77 0>;
@@ -480,7 +528,7 @@
 			     <183>, <184>, <185>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <88>;
+		ti,ngpio = <52>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 78 0>;
@@ -876,4 +924,65 @@
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		dmas = <&main_bcdma_csi 0 0x5000 0>;
+		dma-names = "rx0";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };
diff --git a/src/arm64/ti/k3-am62a7-sk.dts b/src/arm64/ti/k3-am62a7-sk.dts
index 8f64ac2..7b71425 100644
--- a/src/arm64/ti/k3-am62a7-sk.dts
+++ b/src/arm64/ti/k3-am62a7-sk.dts
@@ -274,6 +274,12 @@
 			AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
 		>;
 	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
 };
 
 &mcu_pmx0 {
@@ -407,6 +413,12 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
 
 		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
 				   "BT_EN_SOC", "MMC1_SD_EN",
@@ -434,8 +446,35 @@
 		DRVDD-supply = <&vcc_3v3_sys>;
 		DVDD-supply = <&buck5>;
 	};
+
+	exp2: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "", "",
+				  "", "",
+				  "", "",
+				  "", "",
+				  "WL_LT_EN", "CSI_RSTz",
+				  "", "",
+				  "", "",
+				  "", "",
+				  "SPI0_FET_SEL", "SPI0_FET_OE",
+				  "RGMII2_BRD_CONN_DET", "CSI_SEL2",
+				  "CSI_EN", "AUTO_100M_1000M_CONFIG",
+				  "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST";
+	};
 };
 
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
 &sdhci1 {
 	/* SD/MMC */
 	status = "okay";
diff --git a/src/arm64/ti/k3-am62p-main.dtsi b/src/arm64/ti/k3-am62p-main.dtsi
index 963758c..4c51bae 100644
--- a/src/arm64/ti/k3-am62p-main.dtsi
+++ b/src/arm64/ti/k3-am62p-main.dtsi
@@ -101,8 +101,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -119,8 +124,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 			bootph-all;
diff --git a/src/arm64/ti/k3-am62p5-sk.dts b/src/arm64/ti/k3-am62p5-sk.dts
index f377ead..1773c05 100644
--- a/src/arm64/ti/k3-am62p5-sk.dts
+++ b/src/arm64/ti/k3-am62p5-sk.dts
@@ -598,3 +598,12 @@
 	status = "reserved";
 	bootph-all;
 };
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
+};
diff --git a/src/arm64/ti/k3-am62x-sk-common.dtsi b/src/arm64/ti/k3-am62x-sk-common.dtsi
index 19f57ea..33768c0 100644
--- a/src/arm64/ti/k3-am62x-sk-common.dtsi
+++ b/src/arm64/ti/k3-am62x-sk-common.dtsi
@@ -399,6 +399,13 @@
 	};
 };
 
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
 &sdhci0 {
 	bootph-all;
 	status = "okay";
@@ -517,3 +524,12 @@
 		};
 	};
 };
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
+};
diff --git a/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso b/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso
new file mode 100644
index 0000000..6f4cd73
--- /dev/null
+++ b/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IMX219 (RPi v2) Camera Module
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_imx219_fixed: imx219-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@10 {
+				compatible = "sony,imx219";
+				reg = <0x10>;
+
+				clocks = <&clk_imx219_fixed>;
+				clock-names = "xclk";
+
+				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						link-frequencies = /bits/ 64 <456000000>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git a/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso b/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso
new file mode 100644
index 0000000..9323a4b
--- /dev/null
+++ b/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@3c {
+				compatible = "ovti,ov5640";
+				reg = <0x3c>;
+
+				clocks = <&clk_ov5640_fixed>;
+				clock-names = "xclk";
+				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git a/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
new file mode 100644
index 0000000..dcaa33a
--- /dev/null
+++ b/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@3c {
+				compatible = "ovti,ov5640";
+				reg = <0x3c>;
+
+				clocks = <&clk_ov5640_fixed>;
+				clock-names = "xclk";
+				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git a/src/arm64/ti/k3-am64-main.dtsi b/src/arm64/ti/k3-am64-main.dtsi
index 0be642b..e348114 100644
--- a/src/arm64/ti/k3-am64-main.dtsi
+++ b/src/arm64/ti/k3-am64-main.dtsi
@@ -63,7 +63,7 @@
 			#phy-cells = <1>;
 		};
 
-		epwm_tbclk: clock-controller@4140 {
+		epwm_tbclk: clock-controller@4130 {
 			compatible = "ti,am64-epwm-tbclk";
 			reg = <0x4130 0x4>;
 			#clock-cells = <1>;
@@ -138,8 +138,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -155,8 +160,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x20000>,
+			      <0x00 0x484a0000 0x00 0x4000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 
@@ -623,6 +633,7 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -641,6 +652,7 @@
 		ti,otap-del-sel-sdr104 = <0x6>;
 		ti,otap-del-sel-ddr50 = <0x9>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
 	};
 
 	cpsw3g: ethernet@8000000 {
diff --git a/src/arm64/ti/k3-am64-phycore-som.dtsi b/src/arm64/ti/k3-am64-phycore-som.dtsi
index f87f09d..1678e74 100644
--- a/src/arm64/ti/k3-am64-phycore-som.dtsi
+++ b/src/arm64/ti/k3-am64-phycore-som.dtsi
@@ -29,7 +29,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -39,6 +39,54 @@
 			alignment = <0x1000>;
 			no-map;
 		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
 	};
 
 	leds {
@@ -166,6 +214,34 @@
 	status = "disabled";
 };
 
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
 &main_i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -191,6 +267,30 @@
 	};
 };
 
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -211,6 +311,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
diff --git a/src/arm64/ti/k3-am642-evm.dts b/src/arm64/ti/k3-am642-evm.dts
index 4dba189..8c5651d 100644
--- a/src/arm64/ti/k3-am642-evm.dts
+++ b/src/arm64/ti/k3-am642-evm.dts
@@ -468,11 +468,15 @@
 	bootph-all;
 };
 
-/* mcu_gpio0 is reserved for mcu firmware usage */
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
 };
 
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
 &main_spi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -487,17 +491,19 @@
 	};
 };
 
+/* eMMC */
 &sdhci0 {
-	/* emmc */
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
 	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
diff --git a/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts b/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
index 9175e96..53b64e5 100644
--- a/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
@@ -264,6 +264,7 @@
 };
 
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vcc_3v3_mmc>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git a/src/arm64/ti/k3-am642-sk.dts b/src/arm64/ti/k3-am642-sk.dts
index f29c8a9..1dddd6f 100644
--- a/src/arm64/ti/k3-am642-sk.dts
+++ b/src/arm64/ti/k3-am642-sk.dts
@@ -433,12 +433,17 @@
 	};
 };
 
-/* mcu_gpio0 is reserved for mcu firmware usage */
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
 };
 
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
 &sdhci0 {
+	status = "okay";
 	vmmc-supply = <&wlan_en>;
 	bus-width = <4>;
 	non-removable;
@@ -458,9 +463,10 @@
 	};
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
 	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
diff --git a/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index d95d800..55102d3 100644
--- a/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -425,7 +425,6 @@
 	ti,driver-strength-ohm = <50>;
 	ti,fails-without-test-cd;
 	/* Enabled by overlay */
-	status = "disabled";
 };
 
 &tscadc0 {
diff --git a/src/arm64/ti/k3-am642-tqma64xxl.dtsi b/src/arm64/ti/k3-am642-tqma64xxl.dtsi
index d82d4a9..6c785ef 100644
--- a/src/arm64/ti/k3-am642-tqma64xxl.dtsi
+++ b/src/arm64/ti/k3-am642-tqma64xxl.dtsi
@@ -219,6 +219,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	non-removable;
 	disable-wp;
 	no-sdio;
diff --git a/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi b/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
index 51f902f..1d19798 100644
--- a/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
+++ b/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) Siemens AG, 2021
+ * Copyright (c) Siemens AG, 2021-2023
  *
  * Authors:
  *   Jan Kiszka <jan.kiszka@siemens.com>
@@ -44,3 +44,11 @@
 &tx_pru2_1 {
 	status = "disabled";
 };
+
+&icssg0_eth {
+	status = "disabled";
+};
+
+&icssg0_mdio {
+	status = "disabled";
+};
diff --git a/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi b/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi
index e9419c4..e9b57b8 100644
--- a/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi
+++ b/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -20,7 +20,9 @@
 
 &main_gpio1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp2102n_reset_pin_default>;
+	pinctrl-0 =
+		<&main_pcie_enable_pins_default>,
+		<&cp2102n_reset_pin_default>;
 	gpio-line-names =
 		"", "", "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "", "", "",
diff --git a/src/arm64/ti/k3-am65-iot2050-common.dtsi b/src/arm64/ti/k3-am65-iot2050-common.dtsi
index ba1c14a..61a634a 100644
--- a/src/arm64/ti/k3-am65-iot2050-common.dtsi
+++ b/src/arm64/ti/k3-am65-iot2050-common.dtsi
@@ -9,14 +9,26 @@
  * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
  */
 
-#include "k3-am654.dtsi"
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/net/ti-dp83867.h>
 
 / {
 	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &main_i2c0;
+		i2c3 = &main_i2c1;
+		i2c4 = &main_i2c2;
+		i2c5 = &main_i2c3;
 		spi0 = &mcu_spi0;
 		mmc0 = &sdhci1;
 		mmc1 = &sdhci0;
+		ethernet1 = &icssg0_emac0;
+		ethernet2 = &icssg0_emac1;
 	};
 
 	chosen {
@@ -101,9 +113,498 @@
 		#clock-cells = <0>;
 		clock-frequency = <19200000>;
 	};
+
+	/* Dual Ethernet application node on PRU-ICSSG0 */
+	icssg0_eth: icssg0-eth {
+		compatible = "ti,am654-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg0_rgmii_pins_default>;
+		sram = <&msmc_ram>;
+
+		ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>,
+			<&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		ti,pruss-gp-mux-sel = <2>,      /* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ti,mii-g-rt = <&icssg0_mii_g_rt>;
+		ti,mii-rt = <&icssg0_mii_rt>;
+		ti,iep = <&icssg0_iep0>,  <&icssg0_iep1>;
+
+		interrupt-parent = <&icssg0_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+
+		dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+		       <&main_udmap 0xc101>, /* egress slice 0 */
+		       <&main_udmap 0xc102>, /* egress slice 0 */
+		       <&main_udmap 0xc103>, /* egress slice 0 */
+		       <&main_udmap 0xc104>, /* egress slice 1 */
+		       <&main_udmap 0xc105>, /* egress slice 1 */
+		       <&main_udmap 0xc106>, /* egress slice 1 */
+		       <&main_udmap 0xc107>, /* egress slice 1 */
+		       <&main_udmap 0x4100>, /* ingress slice 0 */
+		       <&main_udmap 0x4101>; /* ingress slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg0_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg0_eth0_phy>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4100>;
+				ti,half-duplex-capable;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			icssg0_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg0_eth1_phy>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4104>;
+				ti,half-duplex-capable;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
 };
 
 &wkup_pmx0 {
+	pinctrl-names =
+		"default",
+		"d0-uart0-rxd",  "d0-gpio",  "d0-gpio-pullup",  "d0-gpio-pulldown",
+		"d1-uart0-txd",  "d1-gpio",  "d1-gpio-pullup",  "d1-gpio-pulldown",
+		"d2-uart0-ctsn", "d2-gpio",  "d2-gpio-pullup",  "d2-gpio-pulldown",
+		"d3-uart0-rtsn", "d3-gpio",  "d3-gpio-pullup",  "d3-gpio-pulldown",
+		"d10-spi0-cs0",  "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown",
+		"d11-spi0-d0",   "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown",
+		"d12-spi0-d1",   "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown",
+		"d13-spi0-clk",  "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown",
+		"a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown",
+		"a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown",
+		"a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown",
+		"a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown",
+		"a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown",
+		"a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown";
+
+	pinctrl-0 = <&d0_uart0_rxd>;
+	pinctrl-1 = <&d0_uart0_rxd>;
+	pinctrl-2 = <&d0_gpio>;
+	pinctrl-3 = <&d0_gpio_pullup>;
+	pinctrl-4 = <&d0_gpio_pulldown>;
+	pinctrl-5 = <&d1_uart0_txd>;
+	pinctrl-6 = <&d1_gpio>;
+	pinctrl-7 = <&d1_gpio_pullup>;
+	pinctrl-8 = <&d1_gpio_pulldown>;
+	pinctrl-9 = <&d2_uart0_ctsn>;
+	pinctrl-10 = <&d2_gpio>;
+	pinctrl-11 = <&d2_gpio_pullup>;
+	pinctrl-12 = <&d2_gpio_pulldown>;
+	pinctrl-13 = <&d3_uart0_rtsn>;
+	pinctrl-14 = <&d3_gpio>;
+	pinctrl-15 = <&d3_gpio_pullup>;
+	pinctrl-16 = <&d3_gpio_pulldown>;
+	pinctrl-17 = <&d10_spi0_cs0>;
+	pinctrl-18 = <&d10_gpio>;
+	pinctrl-19 = <&d10_gpio_pullup>;
+	pinctrl-20 = <&d10_gpio_pulldown>;
+	pinctrl-21 = <&d11_spi0_d0>;
+	pinctrl-22 = <&d11_gpio>;
+	pinctrl-23 = <&d11_gpio_pullup>;
+	pinctrl-24 = <&d11_gpio_pulldown>;
+	pinctrl-25 = <&d12_spi0_d1>;
+	pinctrl-26 = <&d12_gpio>;
+	pinctrl-27 = <&d12_gpio_pullup>;
+	pinctrl-28 = <&d12_gpio_pulldown>;
+	pinctrl-29 = <&d13_spi0_clk>;
+	pinctrl-30 = <&d13_gpio>;
+	pinctrl-31 = <&d13_gpio_pullup>;
+	pinctrl-32 = <&d13_gpio_pulldown>;
+	pinctrl-33 = <&a0_gpio>;
+	pinctrl-34 = <&a0_gpio_pullup>;
+	pinctrl-35 = <&a0_gpio_pulldown>;
+	pinctrl-36 = <&a1_gpio>;
+	pinctrl-37 = <&a1_gpio_pullup>;
+	pinctrl-38 = <&a1_gpio_pulldown>;
+	pinctrl-39 = <&a2_gpio>;
+	pinctrl-40 = <&a2_gpio_pullup>;
+	pinctrl-41 = <&a2_gpio_pulldown>;
+	pinctrl-42 = <&a3_gpio>;
+	pinctrl-43 = <&a3_gpio_pullup>;
+	pinctrl-44 = <&a3_gpio_pulldown>;
+	pinctrl-45 = <&a4_gpio>;
+	pinctrl-46 = <&a4_gpio_pullup>;
+	pinctrl-47 = <&a4_gpio_pulldown>;
+	pinctrl-48 = <&a5_gpio>;
+	pinctrl-49 = <&a5_gpio_pullup>;
+	pinctrl-50 = <&a5_gpio_pulldown>;
+
+	d0_uart0_rxd: d0-uart0-rxd-pins {
+		pinctrl-single,pins = <
+			/* (P4) MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
+		>;
+	};
+
+	d0_gpio: d0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)
+		>;
+	};
+
+	d0_gpio_pullup: d0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d0_gpio_pulldown: d0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d1_uart0_txd: d1-uart0-txd-pins {
+		pinctrl-single,pins = <
+			/* (P5) MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d1_gpio: d1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pullup: d1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pulldown: d1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d2_uart0_ctsn: d2-uart0-ctsn-pins {
+		pinctrl-single,pins = <
+			/* (P1) MCU_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)
+		>;
+	};
+
+	d2_gpio: d2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pullup: d2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pulldown: d2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d3_uart0_rtsn: d3-uart0-rtsn-pins {
+		pinctrl-single,pins = <
+			/* (N3) MCU_UART0_RTSn */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d3_gpio: d3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pullup: d3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pulldown: d3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d10_spi0_cs0: d10-spi0-cs0-pins {
+		pinctrl-single,pins = <
+			/* (Y4) MCU_SPI0_CS0 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	d10_gpio: d10-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pullup: d10-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pulldown: d10-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d11_spi0_d0: d11-spi0-d0-pins {
+		pinctrl-single,pins = <
+			/* (Y3) MCU_SPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
+		>;
+	};
+
+	d11_gpio: d11-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pullup: d11-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pulldown: d11-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d12_spi0_d1: d12-spi0-d1-pins {
+		pinctrl-single,pins = <
+			/* (Y2) MCU_SPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
+		>;
+	};
+
+	d12_gpio: d12-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pullup: d12-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pulldown: d12-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d13_spi0_clk: d13-spi0-clk-pins {
+		pinctrl-single,pins = <
+			/* (Y1) MCU_SPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
+		>;
+	};
+
+	d13_gpio: d13-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pullup: d13-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pulldown: d13-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a0_gpio: a0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pullup: a0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pulldown: a0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a1_gpio: a1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pullup: a1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pulldown: a1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a2_gpio: a2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pullup: a2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pulldown: a2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a3_gpio: a3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pullup: a3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pulldown: a3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a4_gpio: a4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pullup: a4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pulldown: a4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a5_gpio: a5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7)
+		>;
+	};
+
+	a5_gpio_pullup: a5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	a5_gpio_pulldown: a5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
 			/* (AC7) WKUP_I2C0_SCL */
@@ -136,23 +637,6 @@
 		>;
 	};
 
-	arduino_uart_pins_default: arduino-uart-default-pins {
-		pinctrl-single,pins = <
-			/* (P4) MCU_UART0_RXD */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT,  4)
-			/* (P5) MCU_UART0_TXD */
-			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
-		>;
-	};
-
-	arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins {
-		pinctrl-single,pins = <
-			/* (P1) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
-		>;
-	};
 
 	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
 		pinctrl-single,pins = <
@@ -232,6 +716,220 @@
 };
 
 &main_pmx0 {
+	pinctrl-names =
+		"default",
+		"d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown",
+		"d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown",
+		"d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown",
+		"d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown",
+		"d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown",
+		"d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown";
+
+	pinctrl-0 = <&d4_ehrpwm0_a>;
+	pinctrl-1 = <&d4_ehrpwm0_a>;
+	pinctrl-2 = <&d4_gpio>;
+	pinctrl-3 = <&d4_gpio_pullup>;
+	pinctrl-4 = <&d4_gpio_pulldown>;
+
+	pinctrl-5 = <&d5_ehrpwm1_a>;
+	pinctrl-6 = <&d5_gpio>;
+	pinctrl-7 = <&d5_gpio_pullup>;
+	pinctrl-8 = <&d5_gpio_pulldown>;
+
+	pinctrl-9 = <&d6_ehrpwm2_a>;
+	pinctrl-10 = <&d6_gpio>;
+	pinctrl-11 = <&d6_gpio_pullup>;
+	pinctrl-12 = <&d6_gpio_pulldown>;
+
+	pinctrl-13 = <&d7_ehrpwm3_a>;
+	pinctrl-14 = <&d7_gpio>;
+	pinctrl-15 = <&d7_gpio_pullup>;
+	pinctrl-16 = <&d7_gpio_pulldown>;
+
+	pinctrl-17 = <&d8_ehrpwm4_a>;
+	pinctrl-18 = <&d8_gpio>;
+	pinctrl-19 = <&d8_gpio_pullup>;
+	pinctrl-20 = <&d8_gpio_pulldown>;
+
+	pinctrl-21 = <&d9_ehrpwm5_a>;
+	pinctrl-22 = <&d9_gpio>;
+	pinctrl-23 = <&d9_gpio_pullup>;
+	pinctrl-24 = <&d9_gpio_pulldown>;
+
+	d4_ehrpwm0_a: d4-ehrpwm0-a-pins {
+		pinctrl-single,pins = <
+			/* (AG18) EHRPWM0_A */
+			AM65X_IOPAD(0x0084, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d4_gpio: d4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	d4_gpio_pullup: d4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d4_gpio_pulldown: d4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d5_ehrpwm1_a: d5-ehrpwm1-a-pins {
+		pinctrl-single,pins = <
+			/* (AF17) EHRPWM1_A */
+			AM65X_IOPAD(0x008C, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d5_gpio: d5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT, 7)
+		>;
+	};
+
+	d5_gpio_pullup: d5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d5_gpio_pulldown: d5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d6_ehrpwm2_a: d6-ehrpwm2-a-pins {
+		pinctrl-single,pins = <
+			/* (AH16) EHRPWM2_A */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d6_gpio: d6-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d6_gpio_pullup: d6-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d6_gpio_pulldown: d6-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d7_ehrpwm3_a: d7-ehrpwm3-a-pins {
+		pinctrl-single,pins = <
+			/* (AH15) EHRPWM3_A */
+			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d7_gpio: d7-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT, 7)
+		>;
+	};
+
+	d7_gpio_pullup: d7-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d7_gpio_pulldown: d7-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d8_ehrpwm4_a: d8-ehrpwm4-a-pins {
+		pinctrl-single,pins = <
+			/* (AG15) EHRPWM4_A */
+			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d8_gpio: d8-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT, 7)
+		>;
+	};
+
+	d8_gpio_pullup: d8-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d8_gpio_pulldown: d8-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d9_ehrpwm5_a: d9-ehrpwm5-a-pins {
+		pinctrl-single,pins = <
+			/* (AD15) EHRPWM5_A */
+			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d9_gpio: d9-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT, 7)
+		>;
+	};
+
+	d9_gpio_pullup: d9-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d9_gpio_pulldown: d9-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	main_pcie_enable_pins_default: main-pcie-enable-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
+		>;
+	};
+
 	main_uart1_pins_default: main-uart1-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0174, PIN_INPUT,  6)  /* (AE23) UART1_RXD */
@@ -273,17 +971,6 @@
 		>;
 	};
 
-	arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0084, PIN_OUTPUT, 7)  /* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x008C, PIN_OUTPUT, 7)  /* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x0098, PIN_OUTPUT, 7)  /* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7)  /* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7)  /* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7)  /* (AD15) GPIO0_51 */
-		>;
-	};
-
 	dss_vout1_pins_default: dss-vout1-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)  /* VOUT1_DATA0 */
@@ -329,6 +1016,43 @@
 			AM65X_IOPAD(0x0070, PIN_INPUT,  5)  /* (R25) I2C2_SDA */
 		>;
 	};
+
+	icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */
+			AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */
+		>;
+	};
+
+	icssg0_rgmii_pins_default: icssg0-rgmii-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+			AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+			AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+			AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+			AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */
+			AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */
+			AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */
+			AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */
+			AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+			AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */
+			AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+			AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+
+			AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+			AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+			AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+			AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+			AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */
+			AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */
+			AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */
+			AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */
+			AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+			AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */
+			AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+			AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+		>;
+	};
 };
 
 &main_pmx1 {
@@ -345,12 +1069,6 @@
 			AM65X_IOPAD(0x000c, PIN_INPUT,  0)  /* (E21) I2C1_SDA */
 		>;
 	};
-
-	ecap0_pins_default: ecap0-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0010, PIN_INPUT,  0)  /* (D21) ECAP0_IN_APWM_OUT */
-		>;
-	};
 };
 
 &wkup_uart0 {
@@ -366,13 +1084,9 @@
 
 &mcu_uart0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&arduino_uart_pins_default>;
 };
 
 &main_gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
 	gpio-line-names =
 		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "", "", "",
@@ -382,10 +1096,14 @@
 		"", "IO9";
 };
 
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_pcie_enable_pins_default>;
+};
+
 &wkup_gpio0 {
 	pinctrl-names = "default";
 	pinctrl-0 =
-		<&arduino_io_d2_to_d3_pins_default>,
 		<&arduino_i2c_aio_switch_pins_default>,
 		<&arduino_io_oe_pins_default>,
 		<&push_button_pins_default>,
@@ -547,13 +1265,8 @@
 	status = "disabled";
 };
 
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins_default>;
-};
-
 &sdhci1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
@@ -574,9 +1287,6 @@
 
 &mcu_spi0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_spi0_pins_default>;
-
 	#address-cells = <1>;
 	#size-cells = <0>;
 	ti,pindir-d0-out-d1-in;
@@ -716,3 +1426,21 @@
 			<&mcu_r5fss0_core1_memory_region>;
 	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
 };
+
+&icssg0_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg0_mdio_pins_default>;
+
+	icssg0_eth0_phy: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	icssg0_eth1_phy: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
diff --git a/src/arm64/ti/k3-am65-main.dtsi b/src/arm64/ti/k3-am65-main.dtsi
index 5ebb87f..fcea544 100644
--- a/src/arm64/ti/k3-am65-main.dtsi
+++ b/src/arm64/ti/k3-am65-main.dtsi
@@ -449,6 +449,7 @@
 		ti,otap-del-sel-hs400 = <0x0>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@4fa0000 {
@@ -471,6 +472,7 @@
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	scm_conf: scm-conf@100000 {
@@ -498,8 +500,8 @@
 		};
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
-			compatible = "syscon";
-			reg = <0x000041e0 0x14>;
+			compatible = "ti,am654-dss-oldi-io-ctrl", "syscon";
+			reg = <0x41e0 0x14>;
 		};
 
 		ehrpwm_tbclk: clock-controller@4140 {
@@ -790,8 +792,12 @@
 			compatible = "ti,am654-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x100000>,
-			      <0x0 0x35000000 0x0 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x100000>,
+			      <0x0 0x30b00000 0x0 0x10000>,
+			      <0x0 0x30c00000 0x0 0x10000>,
+			      <0x0 0x30d00000 0x0 0x8000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_udmass>;
 			#dma-cells = <1>;
 
@@ -1034,7 +1040,7 @@
 		assigned-clocks = <&k3_clks 67 2>;
 		assigned-clock-parents = <&k3_clks 67 5>;
 
-		interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 
 		dma-coherent;
 
diff --git a/src/arm64/ti/k3-am65-mcu.dtsi b/src/arm64/ti/k3-am65-mcu.dtsi
index edd5cfb..ecd7356 100644
--- a/src/arm64/ti/k3-am65-mcu.dtsi
+++ b/src/arm64/ti/k3-am65-mcu.dtsi
@@ -214,8 +214,12 @@
 			compatible = "ti,am654-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_udmass>;
 			#dma-cells = <1>;
 
diff --git a/src/arm64/ti/k3-am65-wakeup.dtsi b/src/arm64/ti/k3-am65-wakeup.dtsi
index fd2b998..f037b36 100644
--- a/src/arm64/ti/k3-am65-wakeup.dtsi
+++ b/src/arm64/ti/k3-am65-wakeup.dtsi
@@ -34,9 +34,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x43000014 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
diff --git a/src/arm64/ti/k3-am652.dtsi b/src/arm64/ti/k3-am652.dtsi
new file mode 100644
index 0000000..0f22e00
--- /dev/null
+++ b/src/arm64/ti/k3-am652.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM65 SoC family in Dual core configuration
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-am654-industrial-thermal.dtsi"
+	};
+};
diff --git a/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi b/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi
index 5ab434c..1d6cddb 100644
--- a/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi
+++ b/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -9,6 +9,7 @@
  * Common bits of the IOT2050 Basic variant, PG1 and PG2
  */
 
+#include "k3-am652.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
 
 / {
@@ -17,21 +18,6 @@
 		/* 1G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
-
-	cpus {
-		cpu-map {
-			/delete-node/ cluster1;
-		};
-		/delete-node/ cpu@100;
-		/delete-node/ cpu@101;
-	};
-
-	/delete-node/ l2-cache1;
-};
-
-/* eMMC */
-&sdhci0 {
-	status = "disabled";
 };
 
 &main_pmx0 {
diff --git a/src/arm64/ti/k3-am654-base-board.dts b/src/arm64/ti/k3-am654-base-board.dts
index 1637ec5..822c288 100644
--- a/src/arm64/ti/k3-am654-base-board.dts
+++ b/src/arm64/ti/k3-am654-base-board.dts
@@ -449,6 +449,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
@@ -463,6 +464,7 @@
  * disable sdhci1
  */
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1_sd>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git a/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi b/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi
index be55494..3864ec5 100644
--- a/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ b/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 
+#include "k3-am654.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
 
 / {
@@ -43,6 +44,7 @@
 
 /* eMMC */
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
diff --git a/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts b/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts
index 774eb14..bd6f2e6 100644
--- a/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -27,12 +27,6 @@
 };
 
 &main_pmx0 {
-	main_m2_enable_pins_default: main-m2-enable-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
-		>;
-	};
-
 	main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
@@ -66,15 +60,13 @@
 
 &main_gpio0 {
 	pinctrl-names = "default";
-	pinctrl-0 =
-		<&main_m2_pcie_mux_control>,
-		<&arduino_io_d4_to_d9_pins_default>;
+	pinctrl-0 = <&main_m2_pcie_mux_control>;
 };
 
 &main_gpio1 {
 	pinctrl-names = "default";
 	pinctrl-0 =
-		<&main_m2_enable_pins_default>,
+		<&main_pcie_enable_pins_default>,
 		<&main_pmx0_m2_config_pins_default>,
 		<&main_pmx1_m2_config_pins_default>,
 		<&cp2102n_reset_pin_default>;
diff --git a/src/arm64/ti/k3-am68-sk-base-board.dts b/src/arm64/ti/k3-am68-sk-base-board.dts
index 1e1a82f..d0cfdea 100644
--- a/src/arm64/ti/k3-am68-sk-base-board.dts
+++ b/src/arm64/ti/k3-am68-sk-base-board.dts
@@ -31,6 +31,7 @@
 		can1 = &mcu_mcan1;
 		can2 = &main_mcan6;
 		can3 = &main_mcan7;
+		ethernet0 = &cpsw_port1;
 	};
 
 	vusb_main: regulator-vusb-main5v0 {
diff --git a/src/arm64/ti/k3-am69-sk.dts b/src/arm64/ti/k3-am69-sk.dts
index 9868c70..8da5915 100644
--- a/src/arm64/ti/k3-am69-sk.dts
+++ b/src/arm64/ti/k3-am69-sk.dts
@@ -433,6 +433,13 @@
 
 &wkup_pmx2 {
 	bootph-all;
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (AA37) MCU_ADC1_AIN4.WKUP_GPIO0_83 */
+			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7)
+		>;
+	};
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -631,6 +638,93 @@
 		compatible = "atmel,24c512";
 		reg = <0x51>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vds_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &wkup_gpio0 {
@@ -671,7 +765,7 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		gpio-line-names	= "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
+		gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
 				"IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#",
 				"IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz",
 				"PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz",
diff --git a/src/arm64/ti/k3-j7200-main.dtsi b/src/arm64/ti/k3-j7200-main.dtsi
index 264913f..da67bf8 100644
--- a/src/arm64/ti/k3-j7200-main.dtsi
+++ b/src/arm64/ti/k3-j7200-main.dtsi
@@ -281,8 +281,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x00 0x31150000 0x00 0x100>,
 			      <0x00 0x34000000 0x00 0x100000>,
-			      <0x00 0x35000000 0x00 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x35000000 0x00 0x100000>,
+			      <0x00 0x30b00000 0x00 0x4000>,
+			      <0x00 0x30c00000 0x00 0x4000>,
+			      <0x00 0x30d00000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -647,6 +651,7 @@
 		ti,otap-del-sel-hs400 = <0x5>;
 		ti,itap-del-sel-legacy = <0x10>;
 		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,strobe-sel = <0x77>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
diff --git a/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi b/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
index 3fc588b..60b2637 100644
--- a/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
@@ -178,9 +178,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
@@ -346,8 +353,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,
-			      <0x00 0x2aa00000 0x00 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x2aa00000 0x00 0x40000>,
+			      <0x00 0x284a0000 0x00 0x4000>,
+			      <0x00 0x284c0000 0x00 0x4000>,
+			      <0x00 0x28400000 0x00 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/src/arm64/ti/k3-j7200-som-p0.dtsi b/src/arm64/ti/k3-j7200-som-p0.dtsi
index 5a300d4..ea47f10 100644
--- a/src/arm64/ti/k3-j7200-som-p0.dtsi
+++ b/src/arm64/ti/k3-j7200-som-p0.dtsi
@@ -127,6 +127,14 @@
 	};
 };
 
+&wkup_pmx3 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (E18) WKUP_GPIO0_84 */
+		>;
+	};
+};
+
 &main_pmx0 {
 	main_i2c0_pins_default: main-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -264,6 +272,151 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659414: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka1: buck1 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka2: buck2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdd_wk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lp876441: pmic@4c {
+		compatible = "ti,lp8764-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+
+		regulators: regulators {
+			buckb1: buck1 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				bootph-pre-ram;
+			};
+
+			buckb2: buck2 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb3: buck3 {
+				regulator-name = "vdd_core_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &ospi0 {
diff --git a/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso b/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso
new file mode 100644
index 0000000..0c82a13
--- /dev/null
+++ b/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE0 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie0_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie0_ep: pcie-ep@2900000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 239 1>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+	};
+};
diff --git a/src/arm64/ti/k3-j721e-main.dtsi b/src/arm64/ti/k3-j721e-main.dtsi
index 746b9f8..2569b4c 100644
--- a/src/arm64/ti/k3-j721e-main.dtsi
+++ b/src/arm64/ti/k3-j721e-main.dtsi
@@ -382,8 +382,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x100000>,
-			      <0x0 0x35000000 0x0 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x100000>,
+			      <0x0 0x30b00000 0x0 0x20000>,
+			      <0x0 0x30c00000 0x0 0x10000>,
+			      <0x0 0x30d00000 0x0 0x8000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
index f7ab771..a74912d 100644
--- a/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
@@ -48,9 +48,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x0 0x43000014 0x0 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
@@ -468,8 +475,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/src/arm64/ti/k3-j721e-sk.dts b/src/arm64/ti/k3-j721e-sk.dts
index 42fe8ee..188dfe2 100644
--- a/src/arm64/ti/k3-j721e-sk.dts
+++ b/src/arm64/ti/k3-j721e-sk.dts
@@ -459,6 +459,12 @@
 };
 
 &wkup_pmx0 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+		>;
+	};
+
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
@@ -560,6 +566,151 @@
 		compatible = "atmel,24c512";
 		reg = <0x51>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck123-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka123: buck123 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659411: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_sd_dv";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_usb_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &mcu_uart0 {
diff --git a/src/arm64/ti/k3-j721e-som-p0.dtsi b/src/arm64/ti/k3-j721e-som-p0.dtsi
index 7f0686c2..a75611e 100644
--- a/src/arm64/ti/k3-j721e-som-p0.dtsi
+++ b/src/arm64/ti/k3-j721e-som-p0.dtsi
@@ -152,6 +152,12 @@
 		>;
 	};
 
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0d4, PIN_INPUT, 7) /* (G26) WKUP_GPIO0_9 */
+		>;
+	};
+
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
@@ -199,6 +205,160 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659411: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_sd_dv";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_usb_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &ospi0 {
diff --git a/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso b/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso
new file mode 100644
index 0000000..43568eb
--- /dev/null
+++ b/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+	};
+};
diff --git a/src/arm64/ti/k3-j721s2-main.dtsi b/src/arm64/ti/k3-j721s2-main.dtsi
index b03731b..ea7f2b2 100644
--- a/src/arm64/ti/k3-j721s2-main.dtsi
+++ b/src/arm64/ti/k3-j721s2-main.dtsi
@@ -766,6 +766,7 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
@@ -1086,8 +1087,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x80000>,
-			      <0x0 0x35000000 0x0 0x200000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x200000>,
+			      <0x0 0x30b00000 0x0 0x20000>,
+			      <0x0 0x30c00000 0x0 0x8000>,
+			      <0x0 0x30d00000 0x0 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi b/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
index 7254f3b..80aa33c 100644
--- a/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -34,9 +34,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -471,8 +478,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/src/arm64/ti/k3-j721s2-som-p0.dtsi b/src/arm64/ti/k3-j721s2-som-p0.dtsi
index dcad372..da3237b 100644
--- a/src/arm64/ti/k3-j721s2-som-p0.dtsi
+++ b/src/arm64/ti/k3-j721s2-som-p0.dtsi
@@ -172,6 +172,15 @@
 	};
 };
 
+&wkup_pmx1 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+		>;
+	};
+};
+
 &wkup_pmx2 {
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -208,6 +217,190 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659411: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka1234: buck1234 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuwk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcu_gpioret_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659414: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1: buck1 {
+				regulator-name = "vdd_io_1v8_reg";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buckb2: buck2 {
+				regulator-name = "vdd_fpd_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb3: buck3 {
+				regulator-name = "vdd_phy_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_wk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_gpioret_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lp876411: pmic@58 {
+		compatible = "ti,lp8764-q1";
+		reg = <0x58>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+
+		regulators {
+			buckc1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &main_i2c0 {
diff --git a/src/arm64/ti/k3-j784s4-evm.dts b/src/arm64/ti/k3-j784s4-evm.dts
index f1f4c86..f34b92a 100644
--- a/src/arm64/ti/k3-j784s4-evm.dts
+++ b/src/arm64/ti/k3-j784s4-evm.dts
@@ -273,6 +273,10 @@
 	};
 };
 
+&wkup_gpio0 {
+	status = "okay";
+};
+
 &main_pmx0 {
 	bootph-all;
 	main_uart8_pins_default: main-uart8-default-pins {
@@ -407,6 +411,17 @@
 	};
 };
 
+&wkup_pmx1 {
+	status = "okay";
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+		>;
+	};
+};
+
 &wkup_pmx0 {
 	bootph-all;
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
@@ -471,6 +486,93 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vds_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &mcu_uart0 {
diff --git a/src/arm64/ti/k3-j784s4-main.dtsi b/src/arm64/ti/k3-j784s4-main.dtsi
index d89bcdd..f2b720e 100644
--- a/src/arm64/ti/k3-j784s4-main.dtsi
+++ b/src/arm64/ti/k3-j784s4-main.dtsi
@@ -712,6 +712,7 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
@@ -1188,8 +1189,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x00 0x31150000 0x00 0x100>,
 			      <0x00 0x34000000 0x00 0x80000>,
-			      <0x00 0x35000000 0x00 0x200000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x35000000 0x00 0x200000>,
+			      <0x00 0x30b00000 0x00 0x20000>,
+			      <0x00 0x30c00000 0x00 0x8000>,
+			      <0x00 0x30d00000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi b/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
index adb5ea6..3902a92 100644
--- a/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -38,10 +38,18 @@
 		};
 	};
 
-	chipid@43000014 {
+	wkup_conf: bus@43000000 {
 		bootph-all;
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			bootph-all;
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -478,8 +486,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,
-			      <0x00 0x2aa00000 0x00 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x2aa00000 0x00 0x40000>,
+			      <0x00 0x284a0000 0x00 0x4000>,
+			      <0x00 0x284c0000 0x00 0x4000>,
+			      <0x00 0x28400000 0x00 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso b/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
index ae1b9b2..92f4190 100644
--- a/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -21,57 +21,57 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 and SATA */
 &psgtr {
 	status = "okay";
diff --git a/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso b/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso
index b59e48b..f88b71f 100644
--- a/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -16,58 +16,58 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u43 - 0x2d - usb5744 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u43 - 0x2d - usb5744 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 */
 &psgtr {
 	status = "okay";
diff --git a/src/arm64/xilinx/zynqmp-sm-k26-revA.dts b/src/arm64/xilinx/zynqmp-sm-k26-revA.dts
index c4774a4..5162289 100644
--- a/src/arm64/xilinx/zynqmp-sm-k26-revA.dts
+++ b/src/arm64/xilinx/zynqmp-sm-k26-revA.dts
@@ -131,9 +131,7 @@
 &qspi { /* MIO 0-5 - U143 */
 	status = "okay";
 	spi_flash: flash@0 { /* MT25QU512A */
-		compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
-		#address-cells = <1>;
-		#size-cells = <1>;
+		compatible = "jedec,spi-nor"; /* 64MB */
 		reg = <0>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
@@ -222,9 +220,9 @@
 				label = "Secure OS Storage";
 				reg = <0x2280000 0x20000>; /* 128KB */
 			};
-			partition@22A0000 {
+			partition@22a0000 {
 				label = "User";
-				reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
+				reg = <0x22a0000 0x1d60000>; /* 29.375 MB */
 			};
 		};
 	};
diff --git a/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts b/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts
index e821d55..7349162 100644
--- a/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -98,8 +98,12 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem3_default>;
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts b/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts
index b59e113..f767708 100644
--- a/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -91,12 +91,16 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem2_default>;
-	phy0: ethernet-phy@5 {
-		reg = <5>;
-		ti,rx-internal-delay = <0x8>;
-		ti,tx-internal-delay = <0xa>;
-		ti,fifo-depth = <0x1>;
-		ti,dp83867-rxctrl-strap-quirk;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@5 {
+			reg = <5>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+		};
 	};
 };
 
diff --git a/src/arm64/xilinx/zynqmp-zc1751-xm017-dc3.dts b/src/arm64/xilinx/zynqmp-zc1751-xm017-dc3.dts
index 38b0a31..f553b31 100644
--- a/src/arm64/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/src/arm64/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -88,8 +88,12 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: ethernet-phy@0 { /* VSC8211 */
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 { /* VSC8211 */
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/src/arm64/xilinx/zynqmp-zc1751-xm018-dc4.dts b/src/arm64/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 6636e76..6ec1d98 100644
--- a/src/arm64/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ b/src/arm64/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -116,17 +116,21 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy0>;
-	ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
-		reg = <0>;
-	};
-	ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
-		reg = <7>;
-	};
-	ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
-		reg = <3>;
-	};
-	ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
-		reg = <8>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+			reg = <0>;
+		};
+		ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+			reg = <7>;
+		};
+		ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+			reg = <3>;
+		};
+		ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+			reg = <8>;
+		};
 	};
 };
 
diff --git a/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts b/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts
index 0d2ea9c..b1857e1 100644
--- a/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -77,8 +77,12 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem1_default>;
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/src/arm64/xilinx/zynqmp-zcu100-revC.dts b/src/arm64/xilinx/zynqmp-zcu100-revC.dts
index d0091d3..52f998c 100644
--- a/src/arm64/xilinx/zynqmp-zcu100-revC.dts
+++ b/src/arm64/xilinx/zynqmp-zcu100-revC.dts
@@ -123,13 +123,13 @@
 		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
 	};
 
-	si5335_0: si5335_0 { /* clk0_usb - u23 */
+	si5335_0: si5335-0 { /* clk0_usb - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5335_1: si5335_1 { /* clk1_dp - u23 */
+	si5335_1: si5335-1 { /* clk1_dp - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
diff --git a/src/arm64/xilinx/zynqmp.dtsi b/src/arm64/xilinx/zynqmp.dtsi
index b61fc99..eaba466 100644
--- a/src/arm64/xilinx/zynqmp.dtsi
+++ b/src/arm64/xilinx/zynqmp.dtsi
@@ -129,7 +129,7 @@
 		};
 	};
 
-	zynqmp_ipi: zynqmp_ipi {
+	zynqmp_ipi: zynqmp-ipi {
 		bootph-all;
 		compatible = "xlnx,zynqmp-ipi-mailbox";
 		interrupt-parent = <&gic>;
@@ -141,6 +141,7 @@
 
 		ipi_mailbox_pmu1: mailbox@ff9905c0 {
 			bootph-all;
+			compatible = "xlnx,zynqmp-ipi-dest-mailbox";
 			reg = <0x0 0xff9905c0 0x0 0x20>,
 			      <0x0 0xff9905e0 0x0 0x20>,
 			      <0x0 0xff990e80 0x0 0x20>,
@@ -194,12 +195,12 @@
 				mbox-names = "tx", "rx";
 			};
 
-			nvmem_firmware {
+			nvmem-firmware {
 				compatible = "xlnx,zynqmp-nvmem-fw";
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				soc_revision: soc_revision@0 {
+				soc_revision: soc-revision@0 {
 					reg = <0x0 0x4>;
 				};
 			};
@@ -584,8 +585,6 @@
 				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x874>;
 			power-domains = <&zynqmp_firmware PD_ETH_0>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
@@ -600,8 +599,6 @@
 				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x875>;
 			power-domains = <&zynqmp_firmware PD_ETH_1>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
@@ -616,8 +613,6 @@
 				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x876>;
 			power-domains = <&zynqmp_firmware PD_ETH_2>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
@@ -632,8 +627,6 @@
 				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x877>;
 			power-domains = <&zynqmp_firmware PD_ETH_3>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
diff --git a/src/loongarch/loongson-2k0500-ref.dts b/src/loongarch/loongson-2k0500-ref.dts
new file mode 100644
index 0000000..8aefb0c
--- /dev/null
+++ b/src/loongarch/loongson-2k0500-ref.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k0500.dtsi"
+
+/ {
+	compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500";
+	model = "Loongson-2K0500 Reference Board";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x0ee00000>,
+		      <0x0 0x90000000 0x0 0x60000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	bus_id = <0x0>;
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	bus_id = <0x1>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@57 {
+		compatible = "atmel,24c16";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
diff --git a/src/loongarch/loongson-2k0500.dtsi b/src/loongarch/loongson-2k0500.dtsi
new file mode 100644
index 0000000..444779c
--- /dev/null
+++ b/src/loongarch/loongson-2k0500.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	cpu_clk: cpu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		isa@16400000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x16400000 0x4000>;
+		};
+
+		liointc0: interrupt-controller@1fe11400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11400 0x0 0x40>,
+			      <0x0 0x1fe11040 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe11440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11440 0x0 0x40>,
+			      <0x0 0x1fe11048 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <4>;
+			interrupt-names = "int2";
+
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0xffffffff>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe11600 {
+			compatible = "loongson,ls2k0500-eiointc";
+			reg = <0x0 0x1fe11600 0x0 0xea00>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		gmac0: ethernet@1f020000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f020000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@1f030000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f030000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		sata: sata@1f040000 {
+			compatible = "snps,spear-ahci";
+			reg = <0x0 0x1f040000 0x0 0x10000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <75>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1f050000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0x1f050000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		ohci0: usb@1f058000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0x1f058000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <72>;
+			status = "disabled";
+		};
+
+		uart0: serial@1ff40800 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1ff40800 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <2>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1ff48000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <14>;
+			status = "disabled";
+		};
+
+		i2c@1ff48800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <15>;
+			status = "disabled";
+		};
+
+		i2c@1ff49000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+
+		i2c@1ff49800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <17>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <18>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <19>;
+			status = "disabled";
+		};
+
+		pmc: power-management@1ff6c000 {
+			compatible = "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x1ff6c000 0x0 0x58>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <56>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		rtc0: rtc@1ff6c100 {
+			compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x1ff6c100 0x0 0x100>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <35>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0x5>;
+			ranges = <0x01000000 0x0 0x00004000 0x0 0x16404000 0x0 0x00004000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+			pcie@0,0 {
+				reg = <0x0000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>;
+				ranges;
+			};
+
+			pcie@1,0 {
+				reg = <0x0800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>;
+				ranges;
+			};
+		};
+	};
+};
diff --git a/src/loongarch/loongson-2k1000-ref.dts b/src/loongarch/loongson-2k1000-ref.dts
new file mode 100644
index 0000000..ed4d324
--- /dev/null
+++ b/src/loongarch/loongson-2k1000-ref.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k1000.dtsi"
+
+/ {
+	compatible = "loongson,ls2k1000-ref", "loongson,ls2k1000";
+	model = "Loongson-2K1000 Reference Board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x06e00000>,
+		      <0x0 0x08000000 0x0 0x07000000>,
+		      <0x0 0x90000000 0x1 0xe0000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy1: ethernet-phy@1 {
+			reg = <16>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins_default>;
+	pinctrl-names = "default";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@57 {
+		compatible = "atmel,24c16";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&clk {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&pctrl {
+	status = "okay";
+
+	sdio_pins_default: sdio-pins {
+		sdio-pinmux {
+			groups = "sdio";
+			function = "sdio";
+		};
+		sdio-det-pinmux {
+			groups = "pwm2";
+			function = "gpio";
+		};
+	};
+
+	pwm1_pins_default: pwm1-pins {
+		pinmux {
+			groups = "pwm1";
+			function = "pwm1";
+		};
+	};
+
+	pwm0_pins_default: pwm0-pins {
+		pinmux {
+			groups = "pwm0";
+			function = "pwm0";
+		};
+	};
+
+	i2c1_pins_default: i2c1-pins {
+		pinmux {
+			groups = "i2c1";
+			function = "i2c1";
+		};
+	};
+
+	i2c0_pins_default: i2c0-pins {
+		pinmux {
+			groups = "i2c0";
+			function = "i2c0";
+		};
+	};
+
+	nand_pins_default: nand-pins {
+		pinmux {
+			groups = "nand";
+			function = "nand";
+		};
+	};
+
+	hda_pins_default: hda-pins {
+		grp0-pinmux {
+			groups = "hda";
+			function = "hda";
+		};
+		grp1-pinmux {
+			groups = "i2s";
+			function = "gpio";
+		};
+	};
+};
diff --git a/src/loongarch/loongson-2k1000.dtsi b/src/loongarch/loongson-2k1000.dtsi
new file mode 100644
index 0000000..49a70f8
--- /dev/null
+++ b/src/loongarch/loongson-2k1000.dtsi
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg= <0x0>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg = <0x1>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+	};
+
+	ref_100m: clock-ref-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	/* i2c of the dvi eeprom edid */
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	/* i2c of the eeprom edid */
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		scl-gpios = <&gpio0 33 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio0 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <33000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+
+		liointc0: interrupt-controller@1fe01400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe01400 0x0 0x40>,
+			      <0x0 0x1fe01040 0x0 0x8>,
+			      <0x0 0x1fe01140 0x0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe01440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe01440 0x0 0x40>,
+			      <0x0 0x1fe01048 0x0 0x8>,
+			      <0x0 0x1fe01148 0x0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+			interrupt-names = "int1";
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						  <0xffffffff>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		chipid@1fe00000 {
+			compatible = "loongson,ls2k-chipid";
+			reg = <0x0 0x1fe00000 0x0 0x30>;
+			little-endian;
+		};
+
+		pctrl: pinctrl@1fe00420 {
+			compatible = "loongson,ls2k-pinctrl";
+			reg = <0x0 0x1fe00420 0x0 0x18>;
+			status = "disabled";
+		};
+
+		clk: clock-controller@1fe00480 {
+			compatible = "loongson,ls2k-clk";
+			reg = <0x0 0x1fe00480 0x0 0x58>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+			status = "disabled";
+		};
+
+		gpio0: gpio@1fe00500 {
+			compatible = "loongson,ls2k-gpio";
+			reg = <0x0 0x1fe00500 0x0 0x38>;
+			ngpios = <64>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pctrl 0x0 0x0 15>,
+				      <&pctrl 16 16 15>,
+				      <&pctrl 32 32 10>,
+				      <&pctrl 44 44 20>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>,
+				     <29 IRQ_TYPE_LEVEL_HIGH>,
+				     <30 IRQ_TYPE_LEVEL_HIGH>,
+				     <30 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <>,
+				     <>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		tsensor: thermal-sensor@1fe01500 {
+			compatible = "loongson,ls2k1000-thermal";
+			reg = <0x0 0x1fe01500 0x0 0x30>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dma-controller@1fe00c00 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c00 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c10 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c10 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c20 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c20 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c30 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c30 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c40 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c40 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		uart0: serial@1fe20000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1fe20000 0x0 0x10>;
+			clock-frequency = <125000000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <0x0 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1fe21000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe21000 0x0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@1fe21800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe21800 0x0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pmc: power-management@1fe27000 {
+			compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x1fe27000 0x0 0x58>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		rtc0: rtc@1fe27800 {
+			compatible = "loongson,ls2k1000-rtc";
+			reg = <0x0 0x1fe27800 0x0 0x100>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi0: spi@1fff0220 {
+			compatible = "loongson,ls2k1000-spi";
+			reg = <0x0 0x1fff0220 0x0 0x10>;
+			clocks = <&clk LOONGSON2_BOOT_CLK>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18008000 0x0 0x00008000>,
+				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+			gmac0: ethernet@3,0 {
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			gmac1: ethernet@3,1 {
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			ehci0: usb@4,1 {
+				reg = <0x2100 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc1>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			ohci0: usb@4,2 {
+				reg = <0x2200 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc1>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			display@6,0 {
+				reg = <0x3000 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			hda@7,0 {
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sata: sata@8,0 {
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupt-parent = <&liointc0>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 0x0 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@a,0 {
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@b,0 {
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@c,0 {
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@d,0 {
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@e,0 {
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+		};
+	};
+};
diff --git a/src/loongarch/loongson-2k2000-ref.dts b/src/loongarch/loongson-2k2000-ref.dts
new file mode 100644
index 0000000..dca91ca
--- /dev/null
+++ b/src/loongarch/loongson-2k2000-ref.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k2000.dtsi"
+
+/ {
+	compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000";
+	model = "Loongson-2K2000 Reference Board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x0ee00000>,
+		      <0x0 0x90000000 0x0 0x70000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+};
diff --git a/src/loongarch/loongson-2k2000.dtsi b/src/loongarch/loongson-2k2000.dtsi
new file mode 100644
index 0000000..a231949
--- /dev/null
+++ b/src/loongarch/loongson-2k2000.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@1 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&cpu_clk>;
+		};
+
+		cpu1: cpu@2 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x1>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	cpu_clk: cpu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1400000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		pmc: power-management@100d0000 {
+			compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x100d0000 0x0 0x58>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <47>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		liointc: interrupt-controller@1fe01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0x0 0x1fe01400 0x0 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe01600 {
+			compatible = "loongson,ls2k2000-eiointc";
+			reg = <0x0 0x1fe01600 0x0 0xea00>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		pic: interrupt-controller@10000000 {
+			compatible = "loongson,pch-pic-1.0";
+			reg = <0x0 0x10000000 0x0 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			loongson,pic-base-vec = <0>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		msi: msi-controller@1fe01140 {
+			compatible = "loongson,pch-msi-1.0";
+			reg = <0x0 0x1fe01140 0x0 0x8>;
+			msi-controller;
+			loongson,msi-base-vec = <64>;
+			loongson,msi-num-vecs = <192>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		rtc0: rtc@100d0100 {
+			compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x100d0100 0x0 0x100>;
+			interrupt-parent = <&pic>;
+			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1fe001e0 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>,
+				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+			gmac0: ethernet@3,0 {
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			gmac1: ethernet@3,1 {
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			gmac2: ethernet@3,2 {
+				reg = <0x1a00 0x0 0x0 0x0 0x0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			xhci0: usb@4,0 {
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			xhci1: usb@19,0 {
+				reg = <0xc800 0x0 0x0 0x0 0x0>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			display@6,1 {
+				reg = <0x3100 0x0 0x0 0x0 0x0>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			hda@7,0 {
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			sata: sata@8,0 {
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@a,0 {
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@b,0 {
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@c,0 {
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@d,0 {
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@e,0 {
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@f,0 {
+				reg = <0x7800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@10,0 {
+				reg = <0x8000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t1023si-post.dtsi b/src/powerpc/fsl/t1023si-post.dtsi
index d552044..aa5152c 100644
--- a/src/powerpc/fsl/t1023si-post.dtsi
+++ b/src/powerpc/fsl/t1023si-post.dtsi
@@ -367,45 +367,46 @@
 		reg = <0xf0000 0x1000>;
 		interrupts = <18 2 0 0>;
 		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
-		fsl,tmu-calibration = <0x00000000 0x0000000f
-				       0x00000001 0x00000017
-				       0x00000002 0x0000001e
-				       0x00000003 0x00000026
-				       0x00000004 0x0000002e
-				       0x00000005 0x00000035
-				       0x00000006 0x0000003d
-				       0x00000007 0x00000044
-				       0x00000008 0x0000004c
-				       0x00000009 0x00000053
-				       0x0000000a 0x0000005b
-				       0x0000000b 0x00000064
+		fsl,tmu-calibration =
+				<0x00000000 0x0000000f>,
+				<0x00000001 0x00000017>,
+				<0x00000002 0x0000001e>,
+				<0x00000003 0x00000026>,
+				<0x00000004 0x0000002e>,
+				<0x00000005 0x00000035>,
+				<0x00000006 0x0000003d>,
+				<0x00000007 0x00000044>,
+				<0x00000008 0x0000004c>,
+				<0x00000009 0x00000053>,
+				<0x0000000a 0x0000005b>,
+				<0x0000000b 0x00000064>,
 
-				       0x00010000 0x00000011
-				       0x00010001 0x0000001c
-				       0x00010002 0x00000024
-				       0x00010003 0x0000002b
-				       0x00010004 0x00000034
-				       0x00010005 0x00000039
-				       0x00010006 0x00000042
-				       0x00010007 0x0000004c
-				       0x00010008 0x00000051
-				       0x00010009 0x0000005a
-				       0x0001000a 0x00000063
+				<0x00010000 0x00000011>,
+				<0x00010001 0x0000001c>,
+				<0x00010002 0x00000024>,
+				<0x00010003 0x0000002b>,
+				<0x00010004 0x00000034>,
+				<0x00010005 0x00000039>,
+				<0x00010006 0x00000042>,
+				<0x00010007 0x0000004c>,
+				<0x00010008 0x00000051>,
+				<0x00010009 0x0000005a>,
+				<0x0001000a 0x00000063>,
 
-				       0x00020000 0x00000013
-				       0x00020001 0x00000019
-				       0x00020002 0x00000024
-				       0x00020003 0x0000002c
-				       0x00020004 0x00000035
-				       0x00020005 0x0000003d
-				       0x00020006 0x00000046
-				       0x00020007 0x00000050
-				       0x00020008 0x00000059
+				<0x00020000 0x00000013>,
+				<0x00020001 0x00000019>,
+				<0x00020002 0x00000024>,
+				<0x00020003 0x0000002c>,
+				<0x00020004 0x00000035>,
+				<0x00020005 0x0000003d>,
+				<0x00020006 0x00000046>,
+				<0x00020007 0x00000050>,
+				<0x00020008 0x00000059>,
 
-				       0x00030000 0x00000002
-				       0x00030001 0x0000000d
-				       0x00030002 0x00000019
-				       0x00030003 0x00000024>;
+				<0x00030000 0x00000002>,
+				<0x00030001 0x0000000d>,
+				<0x00030002 0x00000019>,
+				<0x00030003 0x00000024>;
 		#thermal-sensor-cells = <1>;
 	};
 
diff --git a/src/powerpc/fsl/t1040si-post.dtsi b/src/powerpc/fsl/t1040si-post.dtsi
index ad0ab33..7767886 100644
--- a/src/powerpc/fsl/t1040si-post.dtsi
+++ b/src/powerpc/fsl/t1040si-post.dtsi
@@ -447,41 +447,42 @@
 		reg = <0xf0000 0x1000>;
 		interrupts = <18 2 0 0>;
 		fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>;
-		fsl,tmu-calibration = <0x00000000 0x00000025
-				       0x00000001 0x00000028
-				       0x00000002 0x0000002d
-				       0x00000003 0x00000031
-				       0x00000004 0x00000036
-				       0x00000005 0x0000003a
-				       0x00000006 0x00000040
-				       0x00000007 0x00000044
-				       0x00000008 0x0000004a
-				       0x00000009 0x0000004f
-				       0x0000000a 0x00000054
+		fsl,tmu-calibration =
+				<0x00000000 0x00000025>,
+				<0x00000001 0x00000028>,
+				<0x00000002 0x0000002d>,
+				<0x00000003 0x00000031>,
+				<0x00000004 0x00000036>,
+				<0x00000005 0x0000003a>,
+				<0x00000006 0x00000040>,
+				<0x00000007 0x00000044>,
+				<0x00000008 0x0000004a>,
+				<0x00000009 0x0000004f>,
+				<0x0000000a 0x00000054>,
 
-				       0x00010000 0x0000000d
-				       0x00010001 0x00000013
-				       0x00010002 0x00000019
-				       0x00010003 0x0000001f
-				       0x00010004 0x00000025
-				       0x00010005 0x0000002d
-				       0x00010006 0x00000033
-				       0x00010007 0x00000043
-				       0x00010008 0x0000004b
-				       0x00010009 0x00000053
+				<0x00010000 0x0000000d>,
+				<0x00010001 0x00000013>,
+				<0x00010002 0x00000019>,
+				<0x00010003 0x0000001f>,
+				<0x00010004 0x00000025>,
+				<0x00010005 0x0000002d>,
+				<0x00010006 0x00000033>,
+				<0x00010007 0x00000043>,
+				<0x00010008 0x0000004b>,
+				<0x00010009 0x00000053>,
 
-				       0x00020000 0x00000010
-				       0x00020001 0x00000017
-				       0x00020002 0x0000001f
-				       0x00020003 0x00000029
-				       0x00020004 0x00000031
-				       0x00020005 0x0000003c
-				       0x00020006 0x00000042
-				       0x00020007 0x0000004d
-				       0x00020008 0x00000056
+				<0x00020000 0x00000010>,
+				<0x00020001 0x00000017>,
+				<0x00020002 0x0000001f>,
+				<0x00020003 0x00000029>,
+				<0x00020004 0x00000031>,
+				<0x00020005 0x0000003c>,
+				<0x00020006 0x00000042>,
+				<0x00020007 0x0000004d>,
+				<0x00020008 0x00000056>,
 
-				       0x00030000 0x00000012
-				       0x00030001 0x0000001d>;
+				<0x00030000 0x00000012>,
+				<0x00030001 0x0000001d>;
 		#thermal-sensor-cells = <1>;
 	};
 
diff --git a/src/riscv/microchip/mpfs-icicle-kit.dts b/src/riscv/microchip/mpfs-icicle-kit.dts
index dce96f2..222a39d 100644
--- a/src/riscv/microchip/mpfs-icicle-kit.dts
+++ b/src/riscv/microchip/mpfs-icicle-kit.dts
@@ -192,6 +192,27 @@
 	status = "okay";
 };
 
+&syscontroller_qspi {
+	/*
+	 * The flash *is* there, but Icicle kits that have engineering sample
+	 * silicon (write?) access to this flash to non-functional. The system
+	 * controller itself can actually access it, but the MSS cannot write
+	 * an image there. Instantiating a coreQSPI in the fabric & connecting
+	 * it to the flash instead should work though. Pre-production or later
+	 * silicon does not have this issue.
+	 */
+	status = "disabled";
+
+	sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "host";
diff --git a/src/riscv/microchip/mpfs.dtsi b/src/riscv/microchip/mpfs.dtsi
index 266489d..59fd2d4 100644
--- a/src/riscv/microchip/mpfs.dtsi
+++ b/src/riscv/microchip/mpfs.dtsi
@@ -194,6 +194,12 @@
 		mboxes = <&mbox 0>;
 	};
 
+	scbclk: mssclkclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <80000000>;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -524,5 +530,16 @@
 			#mbox-cells = <1>;
 			status = "disabled";
 		};
+
+		syscontroller_qspi: spi@37020100 {
+			compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x37020100 0x0 0x100>;
+			interrupt-parent = <&plic>;
+			interrupts = <110>;
+			clocks = <&scbclk>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/src/riscv/renesas/r9a07g043f.dtsi b/src/riscv/renesas/r9a07g043f.dtsi
index b079601..a92cfcf 100644
--- a/src/riscv/renesas/r9a07g043f.dtsi
+++ b/src/riscv/renesas/r9a07g043f.dtsi
@@ -24,6 +24,10 @@
 			reg = <0x0>;
 			status = "okay";
 			riscv,isa = "rv64imafdc";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+					       "zicntr", "zicsr", "zifencei",
+					       "zihpm";
 			mmu-type = "riscv,sv39";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <0x40>;
diff --git a/src/riscv/sifive/hifive-unmatched-a00.dts b/src/riscv/sifive/hifive-unmatched-a00.dts
index 07387f9..72b87b0 100644
--- a/src/riscv/sifive/hifive-unmatched-a00.dts
+++ b/src/riscv/sifive/hifive-unmatched-a00.dts
@@ -123,6 +123,7 @@
 		interrupt-parent = <&gpio>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/src/riscv/sophgo/cv1800b.dtsi b/src/riscv/sophgo/cv1800b.dtsi
index aec6401..165e9e3 100644
--- a/src/riscv/sophgo/cv1800b.dtsi
+++ b/src/riscv/sophgo/cv1800b.dtsi
@@ -3,120 +3,16 @@
  * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
  */
 
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx.dtsi"
 
 / {
 	compatible = "sophgo,cv1800b";
-	#address-cells = <1>;
-	#size-cells = <1>;
+};
 
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		timebase-frequency = <25000000>;
-
-		cpu0: cpu@0 {
-			compatible = "thead,c906", "riscv";
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-block-size = <64>;
-			d-cache-sets = <512>;
-			d-cache-size = <65536>;
-			i-cache-block-size = <64>;
-			i-cache-sets = <128>;
-			i-cache-size = <32768>;
-			mmu-type = "riscv,sv39";
-			riscv,isa = "rv64imafdc";
-			riscv,isa-base = "rv64i";
-			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
-					       "zifencei", "zihpm";
-
-			cpu0_intc: interrupt-controller {
-				compatible = "riscv,cpu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	osc: oscillator {
-		compatible = "fixed-clock";
-		clock-output-names = "osc_25m";
-		#clock-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&plic>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		dma-noncoherent;
-		ranges;
-
-		uart0: serial@4140000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04140000 0x100>;
-			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart1: serial@4150000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04150000 0x100>;
-			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart2: serial@4160000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04160000 0x100>;
-			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart3: serial@4170000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04170000 0x100>;
-			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart4: serial@41c0000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x041c0000 0x100>;
-			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		plic: interrupt-controller@70000000 {
-			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
-			reg = <0x70000000 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			riscv,ndev = <101>;
-		};
+&plic {
+	compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
+};
 
-		clint: timer@74000000 {
-			compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
-			reg = <0x74000000 0x10000>;
-			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
-		};
-	};
+&clint {
+	compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
 };
diff --git a/src/riscv/sophgo/cv1812h-huashan-pi.dts b/src/riscv/sophgo/cv1812h-huashan-pi.dts
new file mode 100644
index 0000000..aa361f3
--- /dev/null
+++ b/src/riscv/sophgo/cv1812h-huashan-pi.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "cv1812h.dtsi"
+
+/ {
+	model = "Huashan Pi";
+	compatible = "sophgo,huashan-pi", "sophgo,cv1812h";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		coprocessor_rtos: region@8fe00000 {
+			reg = <0x8fe00000 0x200000>;
+			no-map;
+		};
+	};
+};
+
+&osc {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/riscv/sophgo/cv1812h.dtsi b/src/riscv/sophgo/cv1812h.dtsi
new file mode 100644
index 0000000..3e7a942
--- /dev/null
+++ b/src/riscv/sophgo/cv1812h.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx.dtsi"
+
+/ {
+	compatible = "sophgo,cv1812h";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&plic {
+	compatible = "sophgo,cv1812h-plic", "thead,c900-plic";
+};
+
+&clint {
+	compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
+};
diff --git a/src/riscv/sophgo/cv18xx.dtsi b/src/riscv/sophgo/cv18xx.dtsi
new file mode 100644
index 0000000..2d6f4a4
--- /dev/null
+++ b/src/riscv/sophgo/cv18xx.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <25000000>;
+
+		cpu0: cpu@0 {
+			compatible = "thead,c906", "riscv";
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <65536>;
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
+					       "zifencei", "zihpm";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc_25m";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-noncoherent;
+		ranges;
+
+		gpio0: gpio@3020000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@3021000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3021000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@3022000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3022000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio3: gpio@3023000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3023000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			portd: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@4140000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04140000 0x100>;
+			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@4150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04150000 0x100>;
+			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@4160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04160000 0x100>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@4170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04170000 0x100>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart4: serial@41c0000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x041c0000 0x100>;
+			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		plic: interrupt-controller@70000000 {
+			reg = <0x70000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <101>;
+		};
+
+		clint: timer@74000000 {
+			reg = <0x74000000 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+		};
+	};
+};
diff --git a/src/riscv/sophgo/sg2042.dtsi b/src/riscv/sophgo/sg2042.dtsi
index 9325654..ead1cc3 100644
--- a/src/riscv/sophgo/sg2042.dtsi
+++ b/src/riscv/sophgo/sg2042.dtsi
@@ -93,144 +93,160 @@
 					      <&cpu63_intc 3>;
 		};
 
-		clint_mtimer0: timer@70ac000000 {
+		clint_mtimer0: timer@70ac004000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac000000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac004000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu0_intc 7>,
 					      <&cpu1_intc 7>,
 					      <&cpu2_intc 7>,
 					      <&cpu3_intc 7>;
 		};
 
-		clint_mtimer1: timer@70ac010000 {
+		clint_mtimer1: timer@70ac014000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac010000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac014000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu4_intc 7>,
 					      <&cpu5_intc 7>,
 					      <&cpu6_intc 7>,
 					      <&cpu7_intc 7>;
 		};
 
-		clint_mtimer2: timer@70ac020000 {
+		clint_mtimer2: timer@70ac024000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac020000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac024000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu8_intc 7>,
 					      <&cpu9_intc 7>,
 					      <&cpu10_intc 7>,
 					      <&cpu11_intc 7>;
 		};
 
-		clint_mtimer3: timer@70ac030000 {
+		clint_mtimer3: timer@70ac034000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac030000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac034000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu12_intc 7>,
 					      <&cpu13_intc 7>,
 					      <&cpu14_intc 7>,
 					      <&cpu15_intc 7>;
 		};
 
-		clint_mtimer4: timer@70ac040000 {
+		clint_mtimer4: timer@70ac044000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac040000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac044000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu16_intc 7>,
 					      <&cpu17_intc 7>,
 					      <&cpu18_intc 7>,
 					      <&cpu19_intc 7>;
 		};
 
-		clint_mtimer5: timer@70ac050000 {
+		clint_mtimer5: timer@70ac054000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac050000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac054000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu20_intc 7>,
 					      <&cpu21_intc 7>,
 					      <&cpu22_intc 7>,
 					      <&cpu23_intc 7>;
 		};
 
-		clint_mtimer6: timer@70ac060000 {
+		clint_mtimer6: timer@70ac064000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac060000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac064000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu24_intc 7>,
 					      <&cpu25_intc 7>,
 					      <&cpu26_intc 7>,
 					      <&cpu27_intc 7>;
 		};
 
-		clint_mtimer7: timer@70ac070000 {
+		clint_mtimer7: timer@70ac074000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac070000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac074000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu28_intc 7>,
 					      <&cpu29_intc 7>,
 					      <&cpu30_intc 7>,
 					      <&cpu31_intc 7>;
 		};
 
-		clint_mtimer8: timer@70ac080000 {
+		clint_mtimer8: timer@70ac084000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac080000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac084000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu32_intc 7>,
 					      <&cpu33_intc 7>,
 					      <&cpu34_intc 7>,
 					      <&cpu35_intc 7>;
 		};
 
-		clint_mtimer9: timer@70ac090000 {
+		clint_mtimer9: timer@70ac094000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac090000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac094000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu36_intc 7>,
 					      <&cpu37_intc 7>,
 					      <&cpu38_intc 7>,
 					      <&cpu39_intc 7>;
 		};
 
-		clint_mtimer10: timer@70ac0a0000 {
+		clint_mtimer10: timer@70ac0a4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0a0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0a4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu40_intc 7>,
 					      <&cpu41_intc 7>,
 					      <&cpu42_intc 7>,
 					      <&cpu43_intc 7>;
 		};
 
-		clint_mtimer11: timer@70ac0b0000 {
+		clint_mtimer11: timer@70ac0b4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0b0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0b4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu44_intc 7>,
 					      <&cpu45_intc 7>,
 					      <&cpu46_intc 7>,
 					      <&cpu47_intc 7>;
 		};
 
-		clint_mtimer12: timer@70ac0c0000 {
+		clint_mtimer12: timer@70ac0c4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0c0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0c4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu48_intc 7>,
 					      <&cpu49_intc 7>,
 					      <&cpu50_intc 7>,
 					      <&cpu51_intc 7>;
 		};
 
-		clint_mtimer13: timer@70ac0d0000 {
+		clint_mtimer13: timer@70ac0d4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0d0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0d4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu52_intc 7>,
 					      <&cpu53_intc 7>,
 					      <&cpu54_intc 7>,
 					      <&cpu55_intc 7>;
 		};
 
-		clint_mtimer14: timer@70ac0e0000 {
+		clint_mtimer14: timer@70ac0e4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0e0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0e4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu56_intc 7>,
 					      <&cpu57_intc 7>,
 					      <&cpu58_intc 7>,
 					      <&cpu59_intc 7>;
 		};
 
-		clint_mtimer15: timer@70ac0f0000 {
+		clint_mtimer15: timer@70ac0f4000 {
 			compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
-			reg = <0x00000070 0xac0f0000 0x00000000 0x00007ff8>;
+			reg = <0x00000070 0xac0f4000 0x00000000 0x0000c000>;
+			reg-names = "mtimecmp";
 			interrupts-extended = <&cpu60_intc 7>,
 					      <&cpu61_intc 7>,
 					      <&cpu62_intc 7>,
diff --git a/src/riscv/starfive/jh7100-common.dtsi b/src/riscv/starfive/jh7100-common.dtsi
index b93ce35..42fb61c 100644
--- a/src/riscv/starfive/jh7100-common.dtsi
+++ b/src/riscv/starfive/jh7100-common.dtsi
@@ -12,6 +12,8 @@
 
 / {
 	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdio1;
 		serial0 = &uart3;
 	};
 
@@ -39,6 +41,35 @@
 			label = "ack";
 		};
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dma-reserved@fa000000 {
+			reg = <0x0 0xfa000000 0x0 0x1000000>;
+			no-map;
+		};
+
+		linux,dma@107a000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10 0x7a000000 0x0 0x1000000>;
+			no-map;
+			linux,dma-default;
+		};
+	};
+
+	soc {
+		dma-ranges = <0x00 0x80000000 0x00 0x80000000 0x00 0x7a000000>,
+			     <0x00 0xfa000000 0x10 0x7a000000 0x00 0x01000000>,
+			     <0x00 0xfb000000 0x00 0xfb000000 0x07 0x85000000>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &gpio {
@@ -84,6 +115,78 @@
 		};
 	};
 
+	sdio0_pins: sdio0-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		sdio-pins {
+			pinmux = <GPIOMUX(55, GPO_LOW, GPO_DISABLE,
+				  GPI_SDIO0_PAD_CARD_DETECT_N)>,
+				 <GPIOMUX(53,
+				  GPO_SDIO0_PAD_CCMD_OUT,
+				  GPO_SDIO0_PAD_CCMD_OEN,
+				  GPI_SDIO0_PAD_CCMD_IN)>,
+				 <GPIOMUX(49,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT0,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT0,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT0)>,
+				 <GPIOMUX(50,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT1,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT1,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT1)>,
+				 <GPIOMUX(51,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT2,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT2,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT2)>,
+				 <GPIOMUX(52,
+				  GPO_SDIO0_PAD_CDATA_OUT_BIT3,
+				  GPO_SDIO0_PAD_CDATA_OEN_BIT3,
+				  GPI_SDIO0_PAD_CDATA_IN_BIT3)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	sdio1_pins: sdio1-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(33, GPO_SDIO1_PAD_CCLK_OUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+		sdio-pins {
+			pinmux = <GPIOMUX(29,
+				  GPO_SDIO1_PAD_CCMD_OUT,
+				  GPO_SDIO1_PAD_CCMD_OEN,
+				  GPI_SDIO1_PAD_CCMD_IN)>,
+				 <GPIOMUX(36,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT0,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT0,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT0)>,
+				 <GPIOMUX(30,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT1,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT1,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT1)>,
+				 <GPIOMUX(34,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT2,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT2,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT2)>,
+				 <GPIOMUX(31,
+				  GPO_SDIO1_PAD_CDATA_OUT_BIT3,
+				  GPO_SDIO1_PAD_CDATA_OEN_BIT3,
+				  GPI_SDIO1_PAD_CDATA_IN_BIT3)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
 	uart3_pins: uart3-0 {
 		rx-pins {
 			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
@@ -154,6 +257,34 @@
 	clock-frequency = <27000000>;
 };
 
+&sdio0 {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_pins>;
+	status = "okay";
+};
+
+&sdio1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	cap-power-off-card;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio1_pins>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
diff --git a/src/riscv/starfive/jh7100.dtsi b/src/riscv/starfive/jh7100.dtsi
index e68cafe..8bcf36d 100644
--- a/src/riscv/starfive/jh7100.dtsi
+++ b/src/riscv/starfive/jh7100.dtsi
@@ -32,6 +32,7 @@
 			i-tlb-sets = <1>;
 			i-tlb-size = <32>;
 			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc";
 			riscv,isa-base = "rv64i";
 			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
@@ -60,6 +61,7 @@
 			i-tlb-sets = <1>;
 			i-tlb-size = <32>;
 			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc";
 			riscv,isa-base = "rv64i";
 			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
@@ -94,14 +96,14 @@
 			thermal-sensors = <&sfctemp>;
 
 			trips {
-				cpu_alert0 {
+				cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit {
+				cpu-crit {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
@@ -111,28 +113,28 @@
 		};
 	};
 
-	osc_sys: osc_sys {
+	osc_sys: osc-sys {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
 
-	osc_aud: osc_aud {
+	osc_aud: osc-aud {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
 
-	gmac_rmii_ref: gmac_rmii_ref {
+	gmac_rmii_ref: gmac-rmii-ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* Should be overridden by the board when needed */
 		clock-frequency = <0>;
 	};
 
-	gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+	gmac_gr_mii_rxclk: gmac-gr-mii-rxclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		/* Should be overridden by the board when needed */
@@ -144,26 +146,64 @@
 		interrupt-parent = <&plic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
+		dma-noncoherent;
 		ranges;
 
 		clint: clint@2000000 {
 			compatible = "starfive,jh7100-clint", "sifive,clint0";
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-					       &cpu1_intc 3 &cpu1_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>;
 		};
 
+		ccache: cache-controller@2010000 {
+			compatible = "starfive,jh7100-ccache", "sifive,ccache0", "cache";
+			reg = <0x0 0x2010000 0x0 0x1000>;
+			interrupts = <128>, <130>, <131>, <129>;
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+		};
+
 		plic: interrupt-controller@c000000 {
 			compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9
-					       &cpu1_intc 11 &cpu1_intc 9>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			riscv,ndev = <133>;
 		};
 
+		sdio0: mmc@10000000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_SDIO0_AHB>,
+				 <&clkgen JH7100_CLK_SDIO0_CCLKINT_INV>;
+			clock-names = "biu", "ciu";
+			interrupts = <4>;
+			data-addr = <0>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			status = "disabled";
+		};
+
+		sdio1: mmc@10010000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_SDIO1_AHB>,
+				 <&clkgen JH7100_CLK_SDIO1_CCLKINT_INV>;
+			clock-names = "biu", "ciu";
+			interrupts = <5>;
+			data-addr = <0>;
+			fifo-depth = <32>;
+			fifo-watermark-aligned;
+			status = "disabled";
+		};
+
 		clkgen: clock-controller@11800000 {
 			compatible = "starfive,jh7100-clkgen";
 			reg = <0x0 0x11800000 0x0 0x10000>;
diff --git a/src/riscv/starfive/jh7110.dtsi b/src/riscv/starfive/jh7110.dtsi
index 45213cd..74ed3b9 100644
--- a/src/riscv/starfive/jh7110.dtsi
+++ b/src/riscv/starfive/jh7110.dtsi
@@ -237,14 +237,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit {
+				cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
diff --git a/src/riscv/thead/th1520-beaglev-ahead.dts b/src/riscv/thead/th1520-beaglev-ahead.dts
index 70e8042..d9b4de9 100644
--- a/src/riscv/thead/th1520-beaglev-ahead.dts
+++ b/src/riscv/thead/th1520-beaglev-ahead.dts
@@ -48,6 +48,10 @@
 	clock-frequency = <62500000>;
 };
 
+&sdhci_clk {
+	clock-frequency = <198000000>;
+};
+
 &uart_sclk {
 	clock-frequency = <100000000>;
 };
@@ -56,6 +60,22 @@
 	status = "okay";
 };
 
+&emmc {
+	bus-width = <8>;
+	max-frequency = <198000000>;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	max-frequency = <198000000>;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/src/riscv/thead/th1520-lichee-module-4a.dtsi b/src/riscv/thead/th1520-lichee-module-4a.dtsi
index a802ab1..1365d3a 100644
--- a/src/riscv/thead/th1520-lichee-module-4a.dtsi
+++ b/src/riscv/thead/th1520-lichee-module-4a.dtsi
@@ -29,6 +29,10 @@
 	clock-frequency = <62500000>;
 };
 
+&sdhci_clk {
+	clock-frequency = <198000000>;
+};
+
 &uart_sclk {
 	clock-frequency = <100000000>;
 };
@@ -36,3 +40,19 @@
 &dmac0 {
 	status = "okay";
 };
+
+&emmc {
+	bus-width = <8>;
+	max-frequency = <198000000>;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	max-frequency = <198000000>;
+	status = "okay";
+};
diff --git a/src/riscv/thead/th1520.dtsi b/src/riscv/thead/th1520.dtsi
index ba4d2c6..8b915e2 100644
--- a/src/riscv/thead/th1520.dtsi
+++ b/src/riscv/thead/th1520.dtsi
@@ -146,6 +146,13 @@
 		#clock-cells = <0>;
 	};
 
+	sdhci_clk: sdhci-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "sdhci_clk";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -304,6 +311,33 @@
 			status = "disabled";
 		};
 
+		emmc: mmc@ffe7080000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe7080000 0x0 0x10000>;
+			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		sdio0: mmc@ffe7090000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe7090000 0x0 0x10000>;
+			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		sdio1: mmc@ffe70a0000 {
+			compatible = "thead,th1520-dwcmshc";
+			reg = <0xff 0xe70a0000 0x0 0x10000>;
+			interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdhci_clk>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
 		timer0: timer@ffefc32000 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xefc32000 0x0 0x14>;