Squashed 'dts/upstream/' changes from aaba2d45dc2a..b35b9bd1d4ee b35b9bd1d4ee Merge tag 'v6.8-dts-raw' 1f50937554b4 Merge tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 576ba37bcbf9 Merge tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net c83dc02bae3e Merge tag 'qcom-arm64-fixes-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes fb254675a395 ASoC: dt-bindings: nvidia: Fix 'lge' vendor prefix c748b8a7dbe8 Merge tag 'tegra-for-6.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes a2e893adde74 Merge tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes abb0f1b369e4 Merge tag 'qcom-arm64-fixes-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes f143aa9a89ec Revert "arm64: dts: qcom: msm8996: Hook up MPM" 9a5690b7be49 arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed ca6dcb63bd34 arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed 8532bb680bd0 dt-bindings: net: renesas,ethertsn: Document default for delays 42569705a4a0 Merge tag 'v6.8-rc6-dts-raw' 06c62487a0b4 arm64: dts: imx8mp: Fix LDB clocks property 7c93039778e4 arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM 7f9a36c5ce39 ARM: dts: imx7: remove DSI port endpoints 87ea8526eaf3 Merge tag 'loongarch-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson d4a4b892cd33 Merge tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 4faf103c7468 Merge tag 'renesas-fixes-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes c1858748b935 Merge tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes f1bb487d660f LoongArch: dts: Minor whitespace cleanup b60485a78d66 Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux d641a222a5d4 arm64: tegra: Fix Tegra234 MGBE power-domains 31aeabc2669e ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes 8c5d69d4f1e9 arm64: dts: qcom: Fix interrupt-map cell sizes 43b35c5b7347 arm: dts: Fix dtc interrupt_map warnings f00ce91341b9 arm64: dts: Fix dtc interrupt_provider warnings c21ad68d3254 arm: dts: Fix dtc interrupt_provider warnings 20a9f605f025 Merge tag 'v6.8-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes 1d9be1dcae7c Merge tag 'imx-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes c27426925b7b Merge tag 'v6.8-rc5-dts-raw' 582c3e28f603 Merge tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 81da29f3007e arm64: tegra: Set the correct PHY mode for MGBE 30e4bc5d76ff Merge tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux f0c34a9f448e riscv: dts: sifive: add missing #interrupt-cells to pmic db36be2a8839 arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names ec7d411e57d6 arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node 105b1e4e5e28 arm64: dts: rockchip: set num-cs property for spi on px30 a05f0ca9a008 arm64: dts: rockchip: minor rk3588 whitespace cleanup 41d6b3786aa9 riscv: dts: starfive: replace underscores in node names 910c8965eb0c dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg" d78e8a541b0a net: marvell,prestera: Fix example PCI bus addressing b40e56bea854 ASoC: dt-bindings: google,sc7280-herobrine: Drop bouncing @codeaurora 48b3246a26fe Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector" a1c414f8f89a Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector" 768ad06f1efa arm64: dts: tqma8mpql: fix audio codec iov-supply 77040f90f388 Merge tag 'v6.8-rc3-dts-raw' 65143ffc8608 arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds 39497955d1c0 ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes 610e244453be arm64: dts: rockchip: Fix the num-lanes of pcie3x4 on Cool Pi CM5 EVB d6e600aea013 arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB 6be17990ec10 arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi CM5 EVB 77765eecb670 arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi 4B 7bca62b5ae66 arm64: dts: qcom: sm6115: Fix missing interconnect-names b2bc58ba4504 arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC 9474eb5c3d86 ALSA: Various fixes for Cirrus Logic CS35L56 support 1e8df48d4da1 dt-bindings: tpm: Drop type from "resets" 4d5c46ab184f dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints fede8bd8306c dt-bindings: xilinx: replace Piyush Mehta maintainership eb691d1ece78 Merge tag 'v6.8-rc2-dts-raw' 5b093a56e797 ASoC: sun4i-spdif: Add Allwinner H616 compatible f2ce9dca7322 ASoC: sun4i-spdif: Fix requirements for H6 fd23c7505f20 arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio cfbd9243ac13 arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio 101ce3470b0e Merge tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm 71ca3bf1c96e Merge tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 74c898882ebb riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint format 28b77b56d972 arm64: dts: rockchip: mark system power controller on rk3588-evb1 986a9f1778ef Merge tag 'samsung-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes 6cf0227916ec arm64: dts: Fix TPM schema violations 60245a9006e9 ARM: dts: Fix TPM schema violations 92924d8db61a Merge tag 'exynos-drm-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes 3b240d0d94a9 dt-bindings: media: Remove K3 Family Prefix from Compatible 186b38b97035 ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd c4f0c99dffb8 arm64: dts: exynos: gs101: comply with the new cmu_misc clock names 429796fee0f1 dt-bindings: clock: gs101: rename cmu_misc clock-names 80d76b25d32f Merge tag 'v6.8-rc1-dts-raw' 339d8d1caab5 Merge tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip df1980733ce9 Merge tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine 8c23badf69c3 Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux d5a95e32a555 Merge tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson 815e38060bf4 Merge tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound f07a1b362766 Merge tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply 9411a3099e9c Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux fcb7108dc362 Merge tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 8e06ce5908ff Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 7b18579c0bef Merge tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy dd4871a00012 Merge tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux 8dfd2acd2c0c Merge tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight 736ecd5cf03c Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu 7d29a06cb311 dt-bindings: i2c: document st,stm32mp25-i2c compatible 365a95704e98 dt-bindings: at24: add ROHM BR24G04 05d2a9834fd6 Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 70a7bee43907 Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 6a04bf7a4f07 Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc e0c35697cd80 Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci cf29a14b0a23 Merge tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 902219ef9ed0 Merge tag 'mailbox-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox c437f65015a8 Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds d0902d05b4a0 Merge tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd 8be1d4636d32 Merge tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux 6eaaddf12639 Merge tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux 2cb012b6fe68 LoongArch: dts: DeviceTree for Loongson-2K2000 6ab0a6f08b83 LoongArch: dts: DeviceTree for Loongson-2K1000 491426707de1 LoongArch: dts: DeviceTree for Loongson-2K0500 c007f27059d1 dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names d9a3ae336ecb dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names 4ee19a9d7583 dt-bindings: loongarch: Add Loongson SoC boards compatibles 3e99ee3f7c53 dt-bindings: loongarch: Add CPU bindings for LoongArch e8bc7c9c625e dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory f5918b47370e dt-bindings: rtc: max31335: add max31335 bindings 7e34d7b53615 rtc: rv8803: add wakeup-source support 81d186f05921 Merge branch 'pci/dt-bindings' 8bd798490681 Merge branch 'pci/controller/rcar' e166e5aad3b0 Merge branch 'pci/controller/cadence' 9de355a75fde dt-bindings: gpio: xilinx: Fix node address in gpio 28bf1e4e9775 dt-bindings: mailbox: qcom-ipcc: document the X1E80100 Inter-Processor Communication Controller f6b31bdd3c60 dt-bindings: mailbox: add Versal IPI bindings c3301d070937 dt-bindings: mailbox: zynqmp: extend required list 6bf977408719 dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks b9ea63718a7e dt-bindings: mailbox: qcom,apcs-kpss-global: drop duplicated qcom,ipq8074-apcs-apps-global e485b251a3a4 Merge tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 60edd8755b1b Merge tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm f946a0610062 Merge tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid 5a9222178c60 Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media 0c57fa00ac11 Merge tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc 120152dd192c Merge tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm f25acec1f182 Merge tag 'gnss-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss 040b6611cd72 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 432f2b929aa4 Merge tag 'gpio-updates-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux 5df1a59e6086 Merge tag 'linux-watchdog-6.8-rc1' of git://www.linux-watchdog.org/linux-watchdog 1d81fba29be6 Merge tag 'hwmon-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging dd7110d3d5d1 Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound c916bd7a1d38 Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm 32704b03c7ec Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi c0d1d21fe5ff dt-bindings: fpga: altera: Convert bridge bindings to yaml 86986ec77fc7 dt-bindings: fpga: Convert bridge binding to yaml 149beabce38e dt-bindings: vendor-prefixes: Add smi da831df01407 Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc d0949aef9e29 Merge tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc c5ee04d9a430 Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 17d4b2f2c7c6 dt-bindings: riscv: Document cbop-block-size 6361e08793d7 dt-bindings: riscv: permit numbers in "riscv,isa" 99f0fa81f51f dt-bindings: riscv: cpus: Clarify mmu-type interpretation 5744984c407c ARM: dts: usr8200: Fix phy registers fd6e692990ee dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" db07ea081cee dt-bindings: power: Clarify wording for wakeup-source property 9deb5d7e7649 Merge tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 f412e763e552 dt-bindings: mfd: sprd: Add support for UMS9620 b50b2489e1a2 dt-bindings: input: bindings for Adafruit Seesaw Gamepad 9fcf5401177c Merge patch series "riscv: hwprobe: add Zicond, Zacas and Ztso support" 6b479ffcb9ed dt-bindings: riscv: add Zacas ISA extension description 45e895d242d0 Merge remote-tracking branch 'palmer/fixes' into for-next 129abc9e5b89 Merge tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 72e795875f31 Merge tag 'mtd/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux a0d6ec02f5dd Merge tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi 092d72f89f32 Merge tag 'regulator-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator f19bbcb501a1 Merge branch 'clk-rs9' into clk-next 6c5ff3361f38 Merge branches 'clk-zynq', 'clk-xilinx' and 'clk-stm' into clk-next 5348f28123c3 Merge branches 'clk-imx', 'clk-qcom', 'clk-amlogic' and 'clk-mediatek' into clk-next dde8a0d89600 Merge branches 'clk-versa', 'clk-silabs', 'clk-samsung', 'clk-starfive' and 'clk-sophgo' into clk-next 147299598f64 dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES 5e8ad2415574 dt-bindings: tpm: Document Microsoft fTPM bindings 4446def763e6 dt-bindings: tpm: Convert IBM vTPM bindings to DT schema d46251bba773 dt-bindings: tpm: Convert Google Cr50 bindings to DT schema 4c0c46fcf77f dt-bindings: tpm: Consolidate TCG TIS bindings fc825b2e9d71 dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible 5d51cf126484 dt-bindings: arm: Add remote etm dt-binding 32c458bd3442 dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo c9ab453dff7c media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas 481554b6b752 dt-bindings: display: panel: Add synaptics r63353 panel controller e04e21bef16e dt-bindings: arm: merge qcom,idle-state with idle-state 452e35e6ff26 Merge tag 'irq-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip d35742374b96 dt-bindings: display: samsung,exynos-mixer: Fix 'regs' typo ac8ffc6d0764 Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux daf5be0b133e Merge tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux b633610fad05 Revert "net: stmmac: Enable Per DMA Channel interrupt" fc2b6856183b dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example 5c111c61a49a dt-bindings: net: snps,dwmac: per channel irq 94d319464237 ASoC: dt-bindings: move tas2563 from tas2562.yaml to tas2781.yaml 8fbbcaccc3ff Merge tag 'socfpga_dts_updates_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt 1161aaee27ae dt-bindings: mmc: add Marvell ac5 e9a747531a5d dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0 57b4e3b1199f Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net cab393f5e80d dt-bindings: serial: Describe ARM dcc interface 1d92607a561e dt-bindings: usb: dwc3: Limit num-hc-interrupters definition cee9797861a0 dt-bindings: usb: xhci: Add num-hc-interrupters definition 4823f8dd230f arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry 4a4f48930e20 dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue 4ddd871b77e8 arm64: dts: qcom: msm8996: Remove PNoC clock from MSS 5598c7c58459 arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI a06133f3b90d arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI 0e31729b965a arm64: dts: qcom: msm8939: Drop RPM bus clocks a9231f1fa44d arm64: dts: qcom: sdm630: Drop RPM bus clocks 7806d0946f48 arm64: dts: qcom: qcs404: Drop RPM bus clocks 6bbd4a339ffd arm64: dts: qcom: msm8996: Drop RPM bus clocks 6c5785d4dec0 arm64: dts: qcom: msm8916: Drop RPM bus clocks d99558e0d6ba dt-bindings: usb: qcom,dwc3: Fix SDM660 clock description 0e7834fa9ba2 dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding f7405c1062e5 dt-bindings: connector: Add child nodes for multiple PD capabilities a2f2b957f7b0 arm64: dts: intel: minor whitespace cleanup around '=' a21ad91a14ac arm64: dts: socfpga: agilex: drop redundant status c64326a0161d arm64: dts: socfpga: agilex: add unit address to soc node 70eea150a8db arm64: dts: socfpga: agilex: move firmware out of soc node 056acfded5ce arm64: dts: socfpga: agilex: move FPGA region out of soc node 8e373ef160c7 arm64: dts: socfpga: agilex: align pin-controller name with bindings 56a65e118b36 arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties 5ea405da6608 arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings 0bc2b8deec9a arm64: dts: socfpga: stratix10: add unit address to soc node 3932c6fc63c2 arm64: dts: socfpga: stratix10: move firmware out of soc node 174dfac57ae2 arm64: dts: socfpga: stratix10: move FPGA region out of soc node e63c11b1c86c arm64: dts: socfpga: stratix10: align pincfg nodes with bindings 5ad3116fb135 arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB 9185b800f9c3 arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size b3832f4d101c ARM: dts: socfpga: align NAND controller name with bindings 7772fcc4eef4 ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size f466442c93ff dt-bindings: clock: mediatek: add clock controllers of MT7988 967ed08fdbd4 dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs 8bb435f3ea7d dt-bindings: clock: mediatek: add MT7988 clock IDs 8b8c659b2121 dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC b822e804fd2c dt-bindings: gpio: add NPCM sgpio driver bindings f4c19e862d2b dt-bindings: gpio: realtek: Add realtek,rtd-gpio 6690161ed7a9 Merge branches 'apple/dart', 'arm/rockchip', 'arm/smmu', 'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next 7382fa53a648 dt-bindings: net: renesas,etheravb: Document RZ/G3S support 247b8886892f dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor fec847c57a81 dt-bindings: Add MP2856/MP2857 voltage regulator device 42c42ff6c177 dt-bindings: hwmon: gpio-fan: Convert txt bindings to yaml 6c13c9d07051 dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074 1e934476b96c dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA 82a434279c9e dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901 5fa4567d6c4f Merge tag 'v6.8-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt a04786e0b7e0 Merge tag 'v6.8-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt 0bf9a2425459 Merge tag 'qcom-arm64-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt a3fde0732d5b Merge tag 'qcom-arm32-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 62073621d812 Merge tag 'arm-soc/for-6.8/devicetree' of https://github.com/Broadcom/stblinux into soc/dt 4cfe8fd4e2b4 Merge tag 'sprd-dt-6.8-rc1' of https://github.com/lyrazhang/linux into soc/dt a355b8e8cbdd dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples 36a030b546d0 dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names ca1c0a8c8091 dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller 7123707b90de dt-bindings: thermal-zones: Document critical-action c29ec9b83fd7 dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor 5a12787401b5 dt-bindings: thermal: loongson,ls2k-thermal: Fix binding check issues 0a6d923c5231 dt-bindings: thermal: convert Mediatek Thermal to the json-schema dc5dd3862b77 dt-bindings: input: iqs269a: Add bindings for OTP variants 5aa00301cee3 dt-bindings: input: iqs269a: Add bindings for slider gestures c4635c803af3 Merge tag 'iio-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next 571d91b8d8df arm64: dts: rockchip: Fix led pinctrl of lubancat 1 548cbdf62c21 arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6 86c28823371d arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b 275bc737b480 arm64: dts: rockchip: support poweroff on the rock-5b e4f7332bb7f8 arm64: dts: rockchip: Support poweroff on Orange Pi 5 d0c46aeba839 arm64: dts: rockchip: nanopc-t6 sdmmc beautification df73c00bc509 arm64: dts: sprd: Change UMS512 idle-state nodename to match bindings 12243eba2b74 arm64: dts: sprd: Add clock reference for pll2 on UMS512 af72bfcc73f3 arm64: dts: sprd: Removed unused clock references from etm nodes d8f5562e697b arm64: dts: sprd: Add support for Unisoc's UMS9620 bd8f67f82f65 dt-bindings: arm: Add compatible strings for Unisoc's UMS9620 9da3db96fae0 arm64: dts: sprd: fix the cpu node for UMS512 3ebc08960525 Merge tag 'v6.7-rc7' into gpio/for-next cb90fcbed71e dt-bindings: timer: Add StarFive JH8100 clint 6f2b19f4df72 dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs 4421b3e3124f dt-bindings: iio: Add AD7091R-8 51a0454cffd6 dt-bindings: power: supply: bq24190: Add BQ24296 compatible 4639caeeab2f dt-bindings: power: reset: xilinx: Rename node names in examples c873132667ed dt-bindings: power: reset: qcom-pon: fix inconsistent example 64cf7a912b11 arm64: dts: rockchip: Fix rk3588 USB power-domain clocks 815a2542ad42 arm64: dts: rockchip: configure eth pad driver strength for orangepi r1 plus lts 9df823a6207b arm64: dts: rockchip: Support poweroff on NanoPC-T6 78bd00069022 arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names cleanup 9d6e0741ae7c arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB a64a2e009e21 dt-bindings: arm: rockchip: Add Cool Pi CM5 4397d62daec8 arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B f1a9c321e26f dt-bindings: arm: rockchip: Add Cool Pi 4B 1e413c69529f dt-bindings: vendor-prefixes: Add Cool Pi a67ded35095e arm64: dts: rockchip: add gpio-line-names to rk3328-rock-pi-e e0ec5767b690 ARM: dts: rockchip: Remove rockchip,default-sample-phase from rk3036.dtsi 75e0afe6681c ARM: dts: rockchip: Add stdout-path for rk3036 kylin 5b38dc06a1e9 dt-bindings: watchdog: qcom,pm8916-wdt: add parent spmi node to example d2f78877f2ea dt-bindings: watchdog: nxp,pnx4008-wdt: convert txt to yaml af1fdc5cd02d dt-bindings: watchdog: qca,ar7130-wdt: convert txt to yaml 5c3d9631b9ac dt-bindings: watchdog: intel,keembay: reference common watchdog schema 6d86f883fd9c dt-bindings: watchdog: re-order entries to match coding convention e28051167c06 dt-bindings: touchscreen: neonode,zforce: Use standard properties 3119a224ac1c dt-bindings: touchscreen: convert neonode,zforce to json-schema 15bf36928144 Merge tag 'icc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next dd37eb39a550 dt-bindings: input: convert drv266x to json-schema 795f4eddfec7 Merge tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 991ab34b2120 Merge tag 'reset-for-v6.8' of git://git.pengutronix.de/pza/linux into soc/drivers 4e7b4659bc67 dt-bindings: mtd: partitions: u-boot: Fix typo 35dd951a7fd5 Merge tag 'riscv-cache-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers 69b18d58cc6d Merge tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers fc5aa9bf69fd Merge tag 'samsung-drivers-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers 84c9739eb5b5 Merge tag 'qcom-drivers-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers 0ef14d7a1f46 dt-bindings: crypto: qcom-qce: document the SC7280 crypto engine 2fd8394e6d9f dt-bindings: crypto: qcom-qce: constrain clocks for SM8150-compatible QCE 40fd9d4f3234 dt-bindings: crypto: qcom-qce: constrain clocks for IPQ9574 QCE 30960ac02d6e dt-bindings: rng: starfive: Add jh8100 compatible string e6272a79f69c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net dcd8ac1c5dd8 dt-bindings: spi: stm32: add st,stm32mp25-spi compatible 87166d1d3f3f Merge tag 'riscv-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt 69abc2365d38 dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding 822a13d2bf90 dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible 6722c7fe2a57 dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible a38a399bccf1 dt-bindings: phy: mediatek: tphy: add a property for force-mode switch ca521e2ecf25 dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header aa156a9707ec Merge tag 'amlogic-arm64-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt e6127e00f352 Merge tag 'mvebu-dt64-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt aad08c0a0671 Merge tag 'mvebu-dt-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt e4320c558711 Merge tag 'samsung-dt64-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 077793e138f6 Merge tag 'qcom-arm32-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 7ff5e1692425 Merge tag 'ti-k3-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt f009c98b2a3f dt-bindings: iio: dac: add MCP4821 e46c2c536959 Merge tag 'ti-keystone-dt-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt edeab43af36b Merge tag 'zynqmp-dt-for-6.8' of https://github.com/Xilinx/linux-xlnx into soc/dt 4e78ad68f722 Merge tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt f4ece4b3d883 Merge tag 'imx-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt 1a2b6b1db701 Merge tag 'imx-bindgins-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt 71e20fbc3d5b Merge tag 'ux500-dts-soc-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt 056c9efa37c5 Merge tag 'renesas-dts-for-v6.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt 339491d0999f Merge tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt 06086605676a dt-bindings: dma: fsl-edma: Add fsl-edma.h to prevent hardcoding in dts 640904451ab8 dt-bindings: dmaengine: Add Loongson LS2X APB DMA controller f88d59ec5d12 Merge tag 'sunxi-dt-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt e833ff47f9b9 Merge tag 'at91-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt 9f821c027b01 Merge tag 'juno-update-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt 4bab8a451f49 Merge tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt a4789dd06449 Merge tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt 5045526f0b7c Merge tag 'mtk-dts64-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt a7603f8260b8 Merge tag 'samsung-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 16a1d6e0b098 Merge tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 0f1f66f39700 ARM: dts: ste: minor whitespace cleanup around '=' 22532c5d3f4a Merge tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt 5288e13a2ad4 Merge tag 'hisi-arm64-dt-for-6.8' of https://github.com/hisilicon/linux-hisi into soc/dt f44f238cabce Merge tag 'w1-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next 61f41fa45eaf Merge tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next 07d575b06ff9 dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml fc02de1f5dc0 dt-bindings: riscv: cpus: Add AMD MicroBlaze V compatible 780449a81d3c dt-bindings: pwm: remove Xinlei's mail f96dd7edb887 arm64: dts: qcom: sc8180x: Fix up PCIe nodes b1ecf20e17e0 arm64: dts: qcom: sc8180x: Mark PCIe hosts cache-coherent eeed8f113289 dt-bindings: pinctrl: xilinx: Rename *gpio to *gpio-grp 2ef9211e8711 dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent 188c161805d3 dt-bindings: pinctrl: qcom: drop common properties 7834682c0d2c dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings c31ea3c9600f dt-bindings: pinctrl: qcom,x1e80100-tlmm: restrict number of interrupts 6cec6f6f090c dt-bindings: pinctrl: qcom,sm8650-tlmm: restrict number of interrupts ef7b1c134921 dt-bindings: pinctrl: qcom,sm8550-tlmm: restrict number of interrupts a3abecdd0e2e dt-bindings: pinctrl: qcom,sdx75-tlmm: restrict number of interrupts 2b1d1c0dd621 dt-bindings: pinctrl: qcom,sa8775p-tlmm: restrict number of interrupts 36f8bb953634 dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts 670ced18d87f dt-bindings: pinctrl: qcom: create common LPASS LPI schema 5ca197c58799 dt-bindings: pinctrl: qcom: Add SM4450 pinctrl 8d27a131f7ad dt-bindings: pinctrl: qcom,pmic-mpp: clean up example 6674c2217ce1 Merge tag 'mediatek-drm-next-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next d7dde4a72dfa Merge tag 'drm-msm-next-2023-12-15' of https://gitlab.freedesktop.org/drm/msm into drm-next 64ddcb330a18 arm64: dts: qcom: x1e80100-qcp: Fix supplies for some LDOs in PM8550 206ab99c38ce arm64: dts: qcom: sm8550: Update idle state time requirements 319f395fbc2a arm64: dts: qcom: sm8550: Separate out X3 idle state af2f75b56294 ARM: dts: qcom: sdx55: Fix the base address of PCIe PHY 4a72661b117b arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK 5b72e989a37a arm64: dts: qcom: x1e80100: align mem timer size cells with bindings b17d7383c10f arm64: dts: qcom: sc7280: Mark SDHCI hosts as cache-coherent 3840ead2163a ARM: dts: qcom: sdx55: fix USB SS wakeup 9e773fad2487 ARM: dts: qcom: sdx55: fix USB DP/DM HS PHY interrupts d0728def7588 ARM: dts: qcom: sdx55: fix pdc '#interrupt-cells' 0ee9dac79d46 ASoC: qcom: add sound card support for SM8650 345b970f1857 add es8326 dt-bindings, commonize headset codec 85a45459eeed GPIO inclusion fixes to misc sound drivers 616e88e1109d arm64: dts: qcom: sc8180x: fix USB SS wakeup f3d1b2acf659 arm64: dts: qcom: sdm670: fix USB SS wakeup 987f42804a25 arm64: dts: qcom: sdm670: fix USB DP/DM HS PHY interrupts 2e58236aa851 ASoC: dt-bindings: qcom,lpass-va-macro: remove spurious contains in if statement bded77d8cc7b dt-bindings: regulator: qcom,usb-vbus-regulator: clean up example e1481a467961 powerpc/fsl: Fix fsl,tmu-calibration to match the schema 26e2fad496d4 arm64: dts: amlogic: fix format for s4 uart node 8a5115be3855 arm64: dts: amlogic: drop redundant status=okay 799049c22bf2 arm64: dts: amlogic: enable some nodes for board AQ222 3fea93dcdd73 arm64: dts: amlogic: add some device nodes for S4 44721ac7f4da Merge tag 'drm-misc-next-2023-12-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next d623bb97a280 Merge tag 'samsung-pinctrl-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel 81d84dd62616 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS WSA 4f673348bd77 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS VA d5b1bc404268 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS TX 40420db77069 ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS RX 605001444f21 ASoC: dt-bindings: qcom,sm8250: Add X1E80100 sound card 4e179f2c3905 ASoC: dt-bindings: mt8188-mt6359: add es8326 support 0c819517fcb2 ASoC: dt-bindings: qcom,sm8250: document SM8650 sound card 0292b51ac8c4 ASoC: tegra: tegra20_ac97: Convert to use GPIO descriptors 4c6bc6503e5e Merge tag 'device_is_big_endian-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into gpio/for-next 31d8096d43a1 dt-bindings: gpio: dwapb: allow gpio-ranges 873d4c02bbfa dt-bindings: clock: google,gs101: rename CMU_TOP gate defines bfc73914844a dt-bindings: clock: si5351: add PLL reset mode property af0493badd9d dt-bindings: clock: si5351: convert to yaml d1a5fb288be1 dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform ee353e29bfb4 dt-bindings: clk: rs9: Add 9FGV0841 48b20705829d dt-bindings: clock: brcm,kona-ccu: convert to YAML b2b282bb3ba9 dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema e35ce136c12f dt-bindings: clock: xilinx: add versal compatible 746818ace7a3 dt-bindings: rtc: Add Nuvoton ma35d1 rtc d8c717fd9bc8 dt-bindings: Remove alt_ref from versal e9caccbf099c arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting b616df631790 arm64: dts: qcom: sc8180x: Describe the GIC redistributor ae7e39a80f0f arm64: dts: qcom: sc8180x: Add interconnects to UFS 0f32e7aa54e0 arm64: dts: qcom: sc8180x: Add missing MDP clocks 3641f17d731d arm64: dts: qcom: sc8180x: Add UFS GDSC 2bbb23973697 arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi a5b4605b6fc6 ARM: dts: qcom: msm8974*: Re-enable remoteprocs on various boards f1ecb44efc55 ARM: dts: qcom: msm8974: Remove bogus cd-gpio pinctrl 9dd85d38d004 ARM: dts: qcom: msm8974-klte: Remove unused property 34c2fdcebf94 arm64: dts: qcom: sc7280: Rename reserved-memory nodes 84a50703ca7d dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles 47f83514132e dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names 1dce719ef64f arm64: dts: qcom: sc7280: Remove unused second MPSS reg afedac693f18 arm64: dts: qcom: sdm670: add display subsystem 1d8d2d147ea5 dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel 3ea56a52a7c2 dt-bindings: wdt: Add ts72xx 18522cdf3ec6 dt-bindings: watchdog: dlg,da9062-watchdog: Document DA9063 watchdog 688fe0bdd724 dt-bindings: watchdog: dlg,da9062-watchdog: Add fallback for DA9061 watchdog 9054003bb13e dt-bindings: watchdog: mediatek,mtk-wdt: add MT7988 watchdog and toprgu 63d466a6e3b3 dt-bindings: watchdog: realtek,rtd1295-watchdog: convert txt to yaml 5b6c41392896 dt-bindings: watchdog: qcom-wdt: Make the interrupt example edge triggered 4f8423c375eb dt-bindings: iio: chemical: add aosong,ags02ma 766801c2fc4b dt-bindings: vendor-prefixes: add aosong 530dcc2cff54 arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode a63d7ac5c9ca arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host 6177bf5ba3b4 arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY cccb449ab331 arm64: dts: qcom: sm8150: add DisplayPort controller 414013ad4921 arm64: dts: qcom: sm8150-hdk: fix SS USB regulators 94e5a8422a14 arm64: dts: qcom: sm8150-hdk: enable HDMI output 94cd2b0ff062 arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX d8577fce5e20 arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes e14f9c1044bd arm64: dts: qcom: sm8550-qrd: add PM8010 regulators 66e97e0962a7 arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators 6437200479ec arm64: dts: qcom: qcm2290: Hook up MPM 75b87eb7e3ee arm64: dts: qcom: msm8996: Hook up MPM e043072a3a33 arm64: dts: qcom: sm6375: Hook up MPM 623a6180066f dt-bindings: arm: qcom: Add Motorola Moto G 4G (2013) 030e5c73208a arm64: dts: qcom: x1e80100-crd: Fix supplies for some LDOs in PM8550 58e87053c1f0 arm64: dts: qcom: sc7280: add QCrypto nodes 6d138c9b4127 arm64: dts: qcom: sc7180: Switch pompom to the generic edp-panel 9248e79cd654 arm64: dts: qcom: sm8150: fix USB SS wakeup 8143f0f67202 arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts 1d46c82d351b arm64: dts: qcom: sdm845: fix USB SS wakeup 5c261eb8cd11 arm64: dts: qcom: sdm845: fix USB DP/DM HS PHY interrupts 2998fdbc15fe arm64: dts: qcom: sc8180x: fix USB DP/DM HS PHY interrupts 220ee261025f arm64: dts: qcom: sm8550: drop unneeded assigned-clocks from codec macros ef2823c0a498 arm64: dts: qcom: sm8550: move Soundwire pinctrl to its nodes 611112fa3972 arm64: dts: qcom: sm8450: drop unneeded assigned-clocks from codec macros 7fe6ee08b28c arm64: dts: qcom: sm8450: move Soundwire pinctrl to its nodes eb6e95625c03 arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration 6f45533e32ad arm64: dts: qcom: sm8650: drop unneeded assigned-clocks from WSA macro 108c60eb7746 dt-bindings: arm: qcom: Fix up htc-memul compatible c493fe546f0a arm64: dts: qcom: sm6115: Hook up interconnects fd22f3a58a9e Merge branch 'icc-sm6115' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into HEAD 85a531800a07 ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree 9c323b20cda8 ARM: dts: qcom: ipq4019: add dedicated SDHCI compatible 2fcaa70bfc3c arm64: dts: qcom: ipq8074: add dedicated SDHCI compatible 757c981838e3 arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports 34e4f27862d1 arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property 61e7df01e058 arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property 786be94e8465 arm64: dts: qcom: qrb5165-rb5: add the Bluetooth node fe9d727180d2 arm64: dts: qcom: sa8775p: Add missing space between node name and braces 8df2548eb151 arm64: dts: qcom: Use "pcie" as the node name instead of "pci" 756ec289cf35 ARM: dts: qcom: Use "pcie" as the node name instead of "pci" 2066a55949a7 arm64: dts: qcom: acer-aspire1: Add sound 90485d1f88ce arm64: dts: qcom: acer-aspire1: Correct audio codec definition 3d97796b14f9 arm64: dts: qcom: acer-aspire1: Enable RTC 5d870a6a209b arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings 1e57f262d57c arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings 731a9974488a arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings 8a512baad9fa arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings 9c4063711b1f arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings 79c130d88048 arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings 65d88afa8518 arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings fa34450ebcf9 arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings 2d00768d0566 arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings 6d501541ab8b arm64: dts: qcom: sm8450-hdk: Enable the A730 GPU 9999a06044c2 arm64: dts: qcom: sm8550-mtp: Enable the A740 GPU 1c8862cd1be0 arm64: dts: qcom: sm8550-qrd: Enable the A740 GPU db2dd74a4321 arm64: dts: qcom: sm8550: Add GPU nodes 41411e46e180 arm64: dts: qcom: sm8450: Add GPU nodes 67082abed4d1 arm64: dts: qcom: msm8939: Make blsp_dma controlled-remotely b0768548dacf arm64: dts: qcom: msm8916: Make blsp_dma controlled-remotely e529c8cd00c4 arm64: dts: qcom: msm8939: Add clock-frequency for broadcast timer dc95d696633b arm64: dts: qcom: Add missing vio-supply for AW2013 ce476167f046 arm64: dts: qcom: ipq6018: Add QUP5 SPI node 4723cf41be1a arm64: dts: qcom: ipq6018: Add remaining QUP UART node af3ecf0ef5eb Merge branch '20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com' into clk-for-6.8 eeb32e2a4dbd dt-bindings: clock: Update the videocc resets for sm8150 c591d3616c87 arm64: dts: qcom: qrb4210-rb2: Enable MPSS and Wi-Fi 479632ff42dd arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibration 4c12613ce6e0 ARM: dts: imx27-phytec-phycore-som: Use 'rtc' as node name e55cb89e6ef8 ARM: dts: imx25: Remove unneeded keypad properties 610b835be6b9 dt-bindings: net: marvell,orion-mdio: Drop "reg" sizes schema 5605354f949e arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by default bb83d09752aa arm64: dts: imx8qxp: Add VPU subsystem file 11f5b7454c94 arm64: dts: imx8qxp-mek: Move port under USB connector f6d6c203902d arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup 643674137f59 dt-bindings: PCI: qcom: Document the SM8650 PCIe Controller ddec040496f1 dt-bindings: PCI: dwc: rockchip: Document optional PCIe reference clock input 2d8a490fd767 dt-bindings: PCI: qcom: Correct reset-names property 2bdefbbe9381 dt-bindings: PCI: qcom: Correct clocks for SM8150 01ce80af6cc2 dt-bindings: PCI: qcom: Correct clocks for SC8180x 9c60f1faccc9 dt-bindings: PCI: qcom: Adjust iommu-map for different SoC c78e4dd9c7c0 arm64: dts: rockchip: make use gpio-keys for buttons on puma-haikou 146cf4124863 arm64: dts: rockchip: expose BIOS Disable feedback pin on rk3399-puma 26575df71b2d arm64: dts: rockchip: fix misleading comment in rk3399-puma-haikou.dts 93c2098cfa35 ARM: dts: ux500-href: Switch HREF520 to AB8505 488dc522177c ARM: dts: ux500-href: Push AB8500 config out 7acade644174 ARM: dts: ux500-href: Push AB8500 inclusion to the top 0043c908a991 dt-bindings: connector: usb: add accessory mode description 7b7f80d863a5 arm64: dts: rockchip: Add vop on rk3588 ef9ea9ea51ca arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode a843a4a028e7 arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode 83869275890f arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed mode 237d1d3aa847 arm64: dts: ti: k3-am6*: Add additional regs for DMA components 6540bf190683 arm64: dts: ti: k3-j7*: Add additional regs for DMA components f584859d0f96 arm64: dts: ti: k3-am65: Add additional regs for DMA components e76881a36a46 arm64: dts: cn913x: add device trees for COM Express boards a57b87e79272 dt-bindings: arm64: add Marvell COM Express boards 22b670935a1f arm64: dts: armada-3720-turris-mox: set irq type for RTC 6b8494ce5492 ARM64: dts: Add special compatibles for the Turris Mox 8fcbbd77bc4f ARM64: dts: marvell: Fix some common switch mistakes 61b4fbe68e70 ARM: dts: marvell: make dts use gpio-fan matrix instead of array 1a025bb583e1 ARM: dts: marvell: Fix some common switch mistakes 283f9ebb847c dt-bindings: serial: Add a new compatible string for UMS9620 42414ddb491a dt-bindings: serial: imx: Properly describe the i.MX1 interrupts a5b226724ae1 dt-bindings: usb: qcom,dwc3: Add X1E80100 binding a94c79572ac2 dt-bindings: usb: Document WCD939x USB SubSystem Altmode/Analog Audio Switch 6c2112d5f3f3 arm64: dts: qcom: qrb5165-rb5: use u16 for DP altmode svid 79493bc9fc10 dt-bindings: connector: usb: add altmodes description a98f9ad936ee dt-bindings: usb: nxp,ptn5110: Fix typos in the title da44f4e15545 dt-bindings: usb: genesys,gl850g: Document 'peer-hub' c32fd07e4010 dt-bindings: nvmem: add new stm32mp25 compatible for stm32-romem cc8835249ffb ARM: dts: stm32: add dcmipp support to stm32mp135 dc483bc0495b dt-bindings: gnss: u-blox: add "reset-gpios" binding 82239f64506f dt-bindings: iommu: rockchip: Add Rockchip RK3588 b10f7d79bc86 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net e39b04bbed6e Merge branch 'icc-qcm2290' into icc-next c95f389c0366 Merge branch 'icc-sm6115' into icc-next b1f1b32e611b dt-bindings: PCI: rcar-pci-host: Add optional regulators 51eab76bc15c arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box 8f65017d5eb4 dt-bindings: arm: sunxi: document Transpeed 8K618-T board name a043657dff28 dt-bindings: vendor-prefixes: add Transpeed b9b13eec182f arm64: dts: st: add bsec support to stm32mp25 4ba9da13226a ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15 3cd8f921b287 ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles 9d7cd7004fbc dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles 3409584c8b1b ARM: dts: stm32: minor whitespace cleanup around '=' 46d3a566ba35 regulator: dt-bindings: qcom,rpmh: add compatible for pm8010 b876feae34ef ASoC: dt-bindings: audio-graph-port: Document new DAI link flags playback-only/capture-only b0c246496fbc dt-bindings: display: msm: dp: declare compatible string for sm8150 363bcab6054e scsi: ufs: qcom: dt-bindings: Add SC7280 compatible string 3d1e051b5db8 arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector ef545aff5ca3 arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector 13069c168986 arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description c92840a54a7a arm64: dts: imx8mp-venice: Fix USB connector description d0235ca7db0f arm64: dts: imx8mp-verdin: Fix USB connector description 8e6a721ca452 arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB node 7662ace2b978 arm64: dts: imx8mn-evk: Move port under USB connector 92576b82f349 arm64: dts: imx8mm-evk: Move port under USB connector 91c629656840 arm64: dts: freescale: introduce dimonoff-gateway-evk board 8b75c148251b dt-bindings: arm: fsl: add Dimonoff gateway EVK board 192ca710eafd dt-bindings: vendor-prefixes: add dimonoff edc62a2939e3 arm64: dts: imx8m*-tqma8m*: Add chassis-type d35e9fd630d7 arm64: dts: imx8mn-beacon: Support overdrive mode a684f6ef9a40 arm64: dts: imx8mn: Enable Overdrive mode 0c6ce8fb001d arm64: dts: imx8mm-beacon: Enable overdrive mode 42e3d3eaa3cb arm64: dts: imx8mm: Add optional overdrive DTSI f9b749293626 arm64: dts: imx8mm: Reduce GPU to nominal speed aadc35d489bd arm64: dts: imx93: Fix the micfil clock-names entries f8b732c140f6 ARM: dts: imx23/28: Fix the DMA controller node name 9697ec153a9c ARM: dts: imx23-sansa: Use preferred i2c-gpios properties 62875ee7373e ARM: dts: imx27-apf27dev: Fix LED name 6bd0d6d0fb3d ARM: dts: imx25/27: Pass timing0 3cd4341f361d ARM: dts: imx25: Fix the iim compatible string 52eef6a12e21 arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support b0f009ddef83 arm64: dts: exynos: google: Add initial Google gs101 SoC support 7932b36aab04 dt-bindings: arm: google: Add bindings for Google ARM platforms c439b1ecd46b dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings 5114ddf2754e dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes 5142777cc846 arm64: dts: renesas: white-hawk-cpu: Fix missing serial console pin control 9c5b72f0dbf7 arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces c20cd1060c83 arm64: dts: renesas: rzg3s-smarc-som: Use switches' names to select on-board functionalities d1702886b9b1 arm64: dts: renesas: r9a08g045: Add Ethernet nodes c8bc29914258 arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller node 2ac19b878bcd arm64: zynqmp: Add missing destination mailbox compatible bfda609d3986 arm64: zynqmp: Fix clock node name in kv260 cards bf79a715a44c arm64: zynqmp: Move fixed clock to / for kv260 067130bf35dd dt-bindings: soc: Add new board description for MicroBlaze V 3909199b5365 dt-bindings: soc: xilinx: Move xilinx.yaml from arm to soc 5a30f0c409d5 arm64: xilinx: Remove address/size-cells from gem nodes c7afa96873c9 arm64: xilinx: Remove address/size-cells from flash node e3a99f7f8d11 arm64: xilinx: Put ethernet phys to mdio node 6f4a9a0c8df9 arm64: xilinx: Remove mt25qu512a compatible string from SOM e3823e6a85e8 arm64: xilinx: Use lower case for partition address ee878ab978b7 arm64: xilinx: Do not use '_' in DT node names edb56e5ac871 riscv: dts: starfive: Enable SDIO wifi on JH7100 boards 738fd2fd6271 riscv: dts: starfive: Enable SD-card on JH7100 boards 4a3456d5f756 riscv: dts: starfive: Add JH7100 MMC nodes 0b98a998f256 riscv: dts: starfive: Add pool for coherent DMA memory on JH7100 boards b7e59570a83e riscv: dts: starfive: Add JH7100 cache controller 0e3644417255 riscv: dts: starfive: Mark the JH7100 as having non-coherent DMAs 2ce3980ca0ba riscv: dts: starfive: Group tuples in interrupt properties 21bb4608c1f4 arm64: dts: ti: k3-am62-main: Add GPU device node 21dbc3bb6085 dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance 0a5288800340 dt-bindings: rockchip,vop2: Add more endpoint definition 689213783aed dt-bindings: display: vop2: Add rk3588 support d06f02a431a5 dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6115 bwmon instance a67732e07f79 arm64: dts: fsd: Add MFC related DT enteries a8f325704092 arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode c33d48e723e9 arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE0 Endpoint Mode 411f344456e4 arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs e88109a7ea70 arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC 8203df16463f arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC 12693cd3a151 arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs 022683d6bab2 arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs b13637076b0a arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs 073920a8e469 spi: dw: Remove Intel Thunder Bay SOC support 853b38b4ccbe dt-bindings: media: s5p-mfc: Add mfcv12 variant af1444135df0 dt-bindings: soc: rockchip: add rk3588 vop/vo syscon ea9d3ade1f63 media: dt-bindings: Add OmniVision OV64A40 eac07152e0b8 media: dt-bindings: media: imx335: Add supply bindings 37535c00a2ec media: dt-bindings: gc0308: add binding 9be8a81b5d55 media: dt-bindings: ov8856: decouple lanes and link frequency from driver e78a33d58798 media: dt-bindings: alvium: add document YAML binding 123e53dddda5 dt-bindings: vendor-prefixes: Add prefix alliedvision 5367c47d39ee media: dt-bindings: ak7375: Add ak7345 support 33368f1c353f dt-bindings: mfd: pm8008: Clean up example node names 2ab5a6b315e7 dt-bindings: leds: qcom,spmi-flash-led: Fix example node name fa6a05463677 dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints 44e89edff478 dt-bindings: leds: awinic,aw200xx: Add AW20108 device 6cd025d35790 dt-bindings: leds: aw200xx: Remove property "awinic,display-rows" 65b3a1cec5b9 dt-bindings: leds: aw200xx: Introduce optional enable-gpios property 48e46bb513fb dt-bindings: leds: Add Allwinner A100 LED controller 193b43eae00d dt-bindings: leds: Fix JSON pointer in max-brightness ac28e493721a ARM: dts: imx25: Move usbphy nodes out of simple-bus 90f8840e451d ARM: dts: imx1: Use 'bus' for AIPI bus dfc79426f635 ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-bus 92c19f27621f ARM: dts: imx27-pdk: Move usbphy0 out of simple-bus 09cddc0d2c3d ARM: dts: imx27: Use 'bus' for EMI bus e7cd1893e9ea ARM: dts: imx27: Use 'bus' for AIPI bus 81e952ba68c6 media: dt-bindings: media: i2c: Add bindings for TW9900 2ed7758d7c0a dt-bindings: vendor-prefixes: Add techwell vendor prefix 9b5febaeea2a arm64: dts: freescale: add fsl-lx2160a-mblx2160a board c763b70a3ecc dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boards 6c6fc780325f ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix 2571ab1025eb ARM: dts: imx1: Fix sram node c64c46277345 ARM: dts: imx27: Fix sram node 4606862f29a7 ARM: dts: imx: Use flash@0,0 pattern e9c196aff7af ARM: dts: imx25/27-eukrea: Fix RTC node name 34087a021485 ARM: dts: imx25-pdk: Pass #sound-dai-cells f91e9208f059 ARM: dts: imx25: Pass I2C clock-names property cb93e178f443 arm64: dts: freescale: imx93: add i3c1 and i3c2 3b2d451cf59f arm64: dts: ls1012a: Remove big-endian from thermal 25e47251c772 dt-bindings: input: microchip,cap11xx: add advanced sensitivity settings a0fb1bc7fd22 Merge tag 'exynos-drm-next-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next aae3e1a63026 dt-bindings: riscv: add Zfa ISA extension description ab9eea090f24 dt-bindings: riscv: add Zvfh[min] ISA extension description 7a64028da27c dt-bindings: riscv: add Zihintntl ISA extension description f4789213e5b6 dt-bindings: riscv: add Zfh[min] ISA extensions description c5de05064f79 dt-bindings: riscv: add vector crypto ISA extensions description 215c236fe6da dt-bindings: riscv: add scalar crypto ISA extensions description 1a96ef0c118a Merge tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 6dbce6382acc Merge tag 'pef2256-framer' into devel 1c566bdd0e0f dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer 0e2e3f19a42d arm64: dts: rockchip: Add Anbernic RG351V aa1c981f085f arm64: dts: rockchip: Split RG351M from Odroid Go Advance 5985d0436d7f dt-bindings: arm: rockchip: Add Anbernic RG351V dddd8bf614e2 arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards e79626358af1 arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards c2bbb4cb37ce arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30 5df2cd229ef2 arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328 773747ea9224 arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368 c47780f2190d arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399 0e5a28940713 arm64: dts: rockchip: make dts use gpio-fan matrix instead of array 51d3d03836a0 arm64: dts: rockchip: add gpio alias for gpio dt nodes 5fcf2d67aa35 arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU 80e922961b8e arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi 8f3fbd13ee16 arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi 15b3dffcbe21 arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi 095c6f3ed2af arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi 5dc789289ead arm64: dts: rockchip: add Theobroma Jaguar SBC bc75d639d8bd dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC 3c240c87c027 arm64: dts: rockchip: Add Powkiddy X55 2496d275584a dt-bindings: arm: rockchip: Add Powkiddy X55 517f4adf026d arm64: dts: rockchip: add USB3 host to rock-5a d474a82f6b8f arm64: dts: rockchip: add USB3 host to rock-5b 4bf4fdf576e0 arm64: dts: rockchip: add missing tx/rx-fifo-depth for rk3328 gmac 56e0ff652ec1 arm64: dts: rockchip: add gpio-line-names to rk3308-rock-pi-s 36bdcd2e79dd ARM: dts: rockchip: add hdmi-connector node to rk3036-kylin bd117185d559 ARM: dts: rockchip: fix rk3036 hdmi ports node 2127f8eafedb dt-bindings: clock: google,gs101: fix incorrect numbering and DGB suffix fff73dbf51fc dt-bindings: soc: samsung: usi: add google,gs101-usi compatible 37ffa8542576 dt-bindings: serial: samsung: Make samsung,uart-fifosize a required property fd8ed4626aeb dt-bindings: serial: samsung: Add google-gs101-uart compatible 33bfe5e1dc68 dt-bindings: watchdog: Document Google gs101 watchdog bindings e6381c01b68b riscv: dts: thead: Enable LicheePi 4A eMMC and microSD 3bd0505c030a riscv: dts: thead: Enable BeagleV Ahead eMMC and microSD a53de85228bf riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock fd1214b13ed4 ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node 5d2956b92dea dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle 402b4259739c dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S 150ddb24b2f0 Merge tag 'coresight-next-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next 64011b700499 dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU a5ab14d25e79 dt-bindings: arm-smmu: Add compatible for X1E80100 SoC aaa9819e17c5 dt-bindings: iommu: arm,smmu: document the SM8650 System MMU c04ccbbeb58a dt-bindings: iommu: arm,smmu: document clocks for the SM8350 GPU SMMU b73f681e020f arm64: dts: juno: Align thermal zone names with bindings 8762e182cc34 dt-bindings: hwmon: Add lltc ltc4286 driver bindings 7711cd743748 Merge tag 'exynos-drm-next-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next 0c9c816dddb4 Backmerge tag 'v6.7-rc5' into drm-next cc330eac5dd3 dt-bindings: iio: humidity: Add TI HDC302x support 07a88600291a dt-bindings: iio: light: add ltr390 a803f8c65ec8 dt-bindings: iio: pressure: add honeywell,hsc030 49600f0eeb26 dt-bindings: iio: temperature: add MLX90635 device 5f69a9e8d3dd dt-bindings: hwmon: Increase max number of io-channels 565f404ae838 dt-bindings: hwmon: Add mps mp5990 driver bindings ad5cba1ee29a ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8650 LPASS WSA 880126e66fb3 ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8650 LPASS VA 19ed8a218bd9 ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8650 LPASS TX 322423704418 ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8650 LPASS RX f09397ff6cbf dt-bindings: dma: Add dma-channel-mask to nvidia,tegra210-adma 6263d2ffbb0f dt-bindings: dma: sf-pdma: add new compatible name 7581e8bd108d arm64: dts: mediatek: mt8192: Add Smart Voltage Scaling node de53c9a33f27 arm64: dts: mediatek: mt8195: Add SVS node and reduce LVTS_AP iospace 53ceb33cc2de arm64: dts: mediatek: mt8183: Change iospaces for thermal and svs d305525393a4 arm64: dts: mediatek: mt8186: fix address warning for ADSP mailboxes d4dbd2b56a9f arm64: dts: mediatek: mt8186: Fix alias prefix for ovl_2l0 209e23166717 arm64: dts: mt6358: Drop bogus "regulator-fixed" compatible properties b5aaf3dc3cc4 arm64: dts: mt8183: kukui-jacuzzi: Drop bogus anx7625 panel_flag property aef30bad7a04 arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile c8d764a0bbc6 dt-bindings: soc: mediatek: pwrap: Modify compatible for MT8188 1b35e3cf8066 dt-bindings: arm: mediatek: Add mt8188 pericfg compatible 7e4914880550 dt-bindings: arm: Add compatible for MediaTek MT8188 c4c85ca7297e arm64: dts: mediatek: mt8195: add DSI and MIPI DPHY nodes e7300ae6b913 dt-bindings: display: mediatek: dsi: add compatible for MediaTek MT8195 cebba0dd1a01 arm64: dts: mediatek: mt6358: Merge ldo_vcn33_* regulators 8ac8be12ac45 dt-bindings: arm: mediatek: convert audsys and mt2701-afe-pcm to yaml 275042f3fe7b arm64: dts: mediatek: mt8195: add MDP3 nodes aba1f17e7acc arm64: dts: mediatek: mt8195: revise VDOSYS RDMA node name 7032d5f144c2 arm64: dts: mediatek: mt8183: correct MDP3 DMA-related nodes 22bae315e031 dt-bindings: display: mediatek: padding: add compatible for MT8195 751c1a1076cb dt-bindings: display: mediatek: split: add compatible for MT8195 e2f195c9941b dt-bindings: display: mediatek: ovl: add compatible for MT8195 98aa994aefee dt-bindings: display: mediatek: merge: add compatible for MT8195 6f5d6cbaa3f9 dt-bindings: display: mediatek: color: add compatible for MT8195 ef86984ae659 dt-bindings: display: mediatek: aal: add compatible for MT8195 8f6efe19695a dt-bindings: media: mediatek: mdp3: add component TDSHP for MT8195 f3a2d9b01651 dt-bindings: media: mediatek: mdp3: add component TCC for MT8195 9952a02bb5ee dt-bindings: media: mediatek: mdp3: add component STITCH for MT8195 6c49acbc4134 dt-bindings: media: mediatek: mdp3: add component HDR for MT8195 d6fdbfb3b4ad dt-bindings: media: mediatek: mdp3: add component FG for MT8195 a7d6e829425b dt-bindings: media: mediatek: mdp3: add compatible for MT8195 WROT 7db0370c2d66 dt-bindings: media: mediatek: mdp3: add compatible for MT8195 RSZ 5620ceb8b6ca dt-bindings: media: mediatek: mdp3: add config for MT8195 RDMA 8f056e0ef45c dt-bindings: media: mediatek: mdp3: merge the indentical RDMA under display c2d8940ef6fd dt-bindings: media: mediatek: mdp3: correct RDMA and WROT node with generic names 4347ab16a815 media: dt-bindings: mediatek: Add phandle to mediatek,scp on MDP3 RDMA e14664bd10f6 arm64: dts: mediatek: mt8195-cherry: Assign sram supply to MFG1 pd 0561502a0693 arm64: dts: mediatek: mt8195-cherry: Add MFG0 domain supply 08b52bb4b076 dt-bindings: reset: mt8188: Add VDOSYS reset control bits 10fbcb9df4e2 dt-bindings: arm: mediatek: Add compatible for MT8188 88c996595db3 dt-bindings: display: mediatek: padding: Add MT8188 ca5643fef42b dt-bindings: display: mediatek: merge: Add compatible for MT8188 ae3b78a94c61 dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188 744464b66c7e dt-bindings: display: mediatek: ethdr: Add compatible for MT8188 01b1569a2d88 dt-bindings: thermal: convert Mediatek Thermal to the json-schema 90d08ec14e3c arm64: dts: mt8183: Add jacuzzi pico/pico6 board 5df3f176b5bf dt-bindings: arm64: mediatek: Add mt8183-kukui-jacuzzi-pico 281ab3bf124c arm64: dts: mt8183: Add jacuzzi makomo board 52cfc0fd5dd9 dt-bindings: arm64: mediatek: Add mt8183-kukui-jacuzzi-makomo 19dd875d8e0a arm64: dts: mt8183: Add kukui katsu board b8dd2f8c3e1c dt-bindings: arm64: mediatek: Add mt8183-kukui-katsu 9a6a916f0bc6 arm64: dts: mediatek: Move MT6358 PMIC interrupts to MT8183 boards 3f27ea46dc3d arm64: dts: mediatek: Use interrupts-extended where possible ad0c69fd2fa3 arm64: dts: mediatek: mt8173: Use interrupts-extended where possible c82e8139aeaa arm64: dts: mediatek: mt8183: Use interrupts-extended where possible d8a485fe96f7 dt-bindings: soc: mediatek: add mt8186 and mt8195 svs dt-bindings e66d619c0c3a dt-bindings: arm: mediatek: mmsys: Add VPPSYS compatible for MT8188 5e6b938fc74f arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones e90ef555e054 arm64: dts: mediatek: mt8183: Add decoder 0f0ccec6cc8d arm64: dts: mediatek: mt8173: Drop VDEC_SYS reg from decoder b6aed11d9548 arm64: dts: mediatek: cherry: Add platform thermal configuration 86760b83d52b dt-bindings: display: simple: Add AUO G156HAN04.0 LVDS display a9ddc30ef584 dt-bindings: display: panel: Add Ilitek ili9805 panel controller defac25462fb dt-bindings: display: st7701: Add Anbernic RG-ARC panel 336bc0e68db2 dt-bindings: display: panel: add Fascontek FS035VG158 panel 955ce81826fb dt-bindings: vendor-prefixes: Add fascontek 752a79b7aaef dt-bindings: display: panel: Clean up leadtek,ltk035c5444t properties 770aea203c16 Merge 6.7-rc5 into tty-next 34ef5edc5b88 Merge 6.7-rc5 into usb-next 621073890e71 Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64 bf94b2d5359e arm64: dts: exynos: add minimal support for exynosautov920 sadk board e9fd8cf1d2d8 arm64: dts: exynos: add initial support for exynosautov920 SoC d0863d30608a dt-bindings: pinctrl: samsung: correct ExynosAutov920 wake-up compatibles 9bdf0db8ae4b dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum 5b54324e6d5b dt-bindings: dma: Drop undocumented examples e2fd1a08fd82 Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next a04c2351b389 dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101 9b3c118b3d19 dt-bindings: clock: Add Google gs101 clock management unit bindings d97b5e938286 dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible 6a5a439c0701 dt-bindings: pinctrl: samsung: add gs101-wakeup-eint compatible 10422d721886 dt-bindings: pinctrl: samsung: add google,gs101-pinctrl compatible 3a5cb767f670 media: dt-bindings: media: rkisp1: Fix the port description for the parallel interface 1da803cb7af8 arm64: dts: qcom: qcm6490-fairphone-fp5: Enable WiFi 8da528961e4e arm64: dts: qcom: qcm6490-fairphone-fp5: Enable various remoteprocs e6fa65e6d152 arm64: dts: qcom: sc7280: Add CDSP node fc9753f721c5 arm64: dts: qcom: sc7280: Add ADSP node c8ee1d58df76 arm64: dts: qcom: sc7280: Use WPSS PAS instead of PIL 52f7c413fda4 arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS 4df3a7b5d504 arm64: dts: qcom: msm8953: Set initial address for memory 423afe7e3dcb ARM: dts: qcom: msm8226: Add GPU bba409f9c339 ARM: dts: qcom: Disable pm8941 & pm8226 smbb charger by default 7e9db953a623 arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board 4e3613f89c7f arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc d8bfc2581200 dt-bindings: input: gpio-mouse: Convert to json-schema 2691fb7a0b13 dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml 2dc455b73efa ARM: dts: samsung: exynos4210-i9100: Add accelerometer node 0fab2792a476 ARM: dts: samsung: exynos4210-i9100: Add node for touch keys 7ea4a30a8fd6 ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12 4cee9945012b ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node e76f84dfaedb arm64: dts: qcom: sm8650: Add DisplayPort device nodes 2cfe9148e611 arm64: dts: qcom: pm8550: drop PWM address/size cells 49e3d2a63a49 dt-bindings: display: mediatek: padding: Add MT8188 8c1a5538e89b dt-bindings: display: mediatek: merge: Add compatible for MT8188 29025812d6c3 dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries 3e60d5b58b7d dt-bindings: gpu: samsung-scaler: constrain iommus and power-domains 1d6aee346b02 dt-bindings: gpu: samsung-g2d: constrain iommus and power-domains d4a84a84e922 dt-bindings: gpu: samsung: constrain clocks in top-level properties 1e0b14dc8237 dt-bindings: gpu: samsung: re-order entries to match coding convention ba50ff463c59 dt-bindings: gpu: samsung-rotator: drop redundant quotes 1a3c1bf5b141 dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188 0a16c7e2c414 dt-bindings: display: mediatek: ethdr: Add compatible for MT8188 925f69a6cc7d dt-bindings: serial: qcom,msm-uartdm: Vote for shared resources 44f4478aa927 dt-bindings: serial: snps-dw-apb-uart: include rs485 schema fad4b52a0fdb arm64: dts: hisilicon: hikey970-pmic: clean up SPMI node 051c12eb5d46 arm64: dts: hisilicon: hikey970-pmic: fix regulator cells properties e567127bd619 dt-bindings: hisilicon: Merge hi3620-clock into hisilicon,sysctrl binding 4b823f7042ef arm64: dts: qcom: x1e80100: Add Compute Reference Device f51679f0f817 arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts ca121fc146b2 dt-bindings: arm: qcom: Document X1E80100 SoC and boards c53c3b8c12a4 dt-bindings: arm: cpus: Add qcom,oryon compatible aa432318faa9 Merge branch 'icc-x1e80100' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.8 9eba2f2fb214 Merge branch '20231205061002.30759-4-quic_sibis@quicinc.com' into arm64-for-6.8 f213e67c84b7 Merge branch '20231205061002.30759-4-quic_sibis@quicinc.com' into clk-for-6.8 ecc521e21905 dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100 079af735ef3c dt-bindings: clock: qcom: Add X1E80100 GCC clocks 8f4495322f78 arm64: dts: qcom: sm8650-mtp: add WSA8845 speakers 02b73ff63440 arm64: dts: qcom: sm8650: add Soundwire controllers e6679602ac09 arm64: dts: qcom: sm8650: add ADSP audio codec macros 5c0a5d9640c3 arm64: dts: qcom: sm8650: add LPASS LPI pin controller 7f6211cc8e63 arm64: dts: qcom: sm8650: add ADSP GPR b72a9e98977b arm64: dts: qcom: sm8650-qrd: enable IPA 13bdc41575ab arm64: dts: qcom: sm8650: add IPA information 0fd767d395a1 arm64: dts: qcom: sm8650-qrd: add interconnect dependent device nodes d68c8f7f237a arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes 900a28b939d2 arm64: dts: qcom: sm8650: add interconnect dependent device nodes ff01973261d0 arm64: dts: qcom: sm8650: add initial SM8650 QRD dts 185ce15a620b arm64: dts: qcom: sm8650: add initial SM8650 MTP dts 487b5dde17e2 arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable 61ff00c8e1de arm64: dts: qcom: add initial SM8650 dtsi 7266e49a2f3e dt-bindings: arm: qcom: document SM8650 and the reference boards 34a104c65fa9 Merge branch 'icc-sm8650' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.8 dc9c79dc36cc Merge branch '20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into arm64-for-6.8 482bf7559678 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 89cdcbe73e3a dt-bindings: display: msm: dp-controller: document SM8650 compatible 6457d6362b66 docs: dt-bindings: add DTS Coding Style document 17bd76b0dcba ARM: dts: rockchip: add gpio alias for gpio dt nodes 1e3bf6cdb555 dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example ebf62e0e08ff dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding ff778a37f71a dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference 60bfc8c9aef9 dt-bindings: firmware: qcom,scm: Allow interconnect for everyone ae3daad140cd arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree 3ab4a6461f9d dt-bindings: arm: qcom: Add Xiaomi Pad 6 (xiaomi-pipa) a4229e4b1bf7 arm64: dts: qcom: sm8550-qrd: enable IPA 0b02bd1a7f8b arm64: dts: qcom: sm8550: add IPA information 1d704f347212 dt-bindings: firmware: qcom,scm: document SCM on X1E80100 SoCs a07e2c07074c dt-bindings: arm: qcom-soc: extend pattern matching for X1E80100 SoC 190053cb1ce8 arm64: dts: qcom: minor whitespace cleanup around '=' e5d9eb69d255 ARM: dts: qcom: minor whitespace cleanup around '=' a12829c0d5ea arm64: dts: qcom: ipq8074: Add QUP4 SPI node 81c5f29af493 arm64: dts: qcom: qdu1000: Add ECPRI clock controller 7f8d2a160503 Merge branch '20231123064735.2979802-2-quic_imrashai@quicinc.com' into clk-for-6.8 a7b1e49f140b dt-bindings: clock: qcom: Add ECPRICC clocks for QDU1000 and QRU1000 0d8365b85a68 ARM: dts: qcom: sdx55: fix USB wakeup interrupt types 4e5dc5d2a1e5 arm64: dts: qcom: sm8550: fix USB wakeup interrupt types b0dd9226dd63 arm64: dts: qcom: sm8150: fix USB wakeup interrupt types 301d240b276b arm64: dts: qcom: sm6375: fix USB wakeup interrupt types bcfa8e3ed274 arm64: dts: qcom: sdm845: fix USB wakeup interrupt types 20a6fe5d28b2 arm64: dts: qcom: sdm670: fix USB wakeup interrupt types d2c7cfd6cfc3 arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types 6f29d799b7cf arm64: dts: qcom: sc7280: fix usb_2 wakeup interrupt types ca84d4480b44 arm64: dts: qcom: sc7280: fix usb_1 wakeup interrupt types 096085135fda arm64: dts: qcom: sc7180: fix USB wakeup interrupt types 6c1f003cc9a1 arm64: dts: qcom: sa8775p: fix USB wakeup interrupt types 45bd09d633c8 arm64: dts: qcom: msm8916-longcheer-l8150: Add battery and charger 195857e6f299 arm64: dts: qcom: pm8916: Add BMS and charger 6caacf1f1bd3 arm64: dts: qcom: sc7280: Add 0xac Adreno speed bin 3ddcb3a31e24 arm64: dts: qcom: sc7280: Mark Adreno SMMU as DMA coherent b8bf84b9efc0 arm64: dts: qcom: sc7280: Fix up GPU SIDs 0830942e59a4 arm64: dts: qcom: sc7280: Add ZAP shader support 6a2b85d201c9 dt-bindings: arm: qcom-soc: extend pattern for matching existing SoCs ddd782c9e1e9 dt-bindings: cache: qcom,llcc: Add X1E80100 compatible 573141bcc2f7 arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support 93789523f679 arm64: dts: qcom: Add USB3 and PHY support on SDX75 ddc8552a97e0 arm64: dts: qcom: Add interconnect nodes for SDX75 2f6480d75792 arm64: dts: qcom: sm8350: Fix remoteproc interrupt type 22ab1e4b96e5 arm64: dts: qcom: pm8350k: Remove hanging whitespace 648dd7cb906d arm64: dts: qcom: sm8350: Fix DMA0 address aa5e755d7246 dt-bindings: iio: adc: qcom: Add Qualcomm smb139x aee24a669374 arm64: dts: qcom: sc8180x: align APSS with bindings c51b52a3c7aa arm64: dts: qcom: sm6375-pdx225: add fixed touchscreen AVDD regulator 714c2d01cb79 arm64: dts: qcom: sm6125: add interrupts to DWC3 USB controller 869ed2bf0b06 arm64: dts: qcom: sm6115: align mem timer size cells with bindings 5b01a3bc4e38 arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs abcbd3630645 arm64: dts: qcom: sc8180x-primus: use 'gpios' suffix for PCI GPIOs 5281b1e2c756 arm64: dts: qcom: sc8180x-flex-5g: use 'gpios' suffix for PCI GPIOs dbf927ecfde3 arm64: dts: qcom: sdm845: correct Soundwire node name 27d49e38f5d4 arm64: dts: qcom: sdm845-db845c: correct LED panic indicator 85591f38ba27 arm64: dts: qcom: qrb5165-rb5: correct LED panic indicator 65b61add6d70 arm64: dts: qcom: sm8250: Add wakeup-source to usb_1 and usb_2 343c9084fd53 arm64: dts: qcom: sdm850-lenovo-yoga: Add wakeup-sources eb9d72ac20a4 arm64: dts: qcom: sa8775p-ride: enable pmm8654au_0_pon_resin e4828a6315b4 arm64: dts: qcom: sm8350: move DPU opp-table to its node cfa2fb4b7f5b arm64: dts: qcom: sc8280xp-x13s: drop sound-dai-cells from eDisplayPort 927e9926b48f arm64: dts: qcom: sc8180x-primus: drop sound-dai-cells from eDisplayPort ca8a02834a8f arm64: dts: qcom: sm8250: correct Soundwire node name 682a341c0cdc arm64: dts: qcom: sc8280xp: correct Soundwire node name 13f2dbc0a9cb arm64: dts: qcom: qdu1000-idp: drop unused LLCC multi-ch-bit-off 6cda67d14000 arm64: dts: qcom: qdu1000: correct LLCC reg entries 208a56e344a2 arm64: dts: qcom: sm8450: fix soundwire controllers node name c7bee631d3e9 arm64: dts: qcom: sm8550: fix soundwire controllers node name 255ca7c95406 Merge branch '20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into clk-for-6.8 52721c372031 dt-bindings: clock: qcom: Document the SM8650 RPMH Clock Controller a8430c36d8bc dt-bindings: clock: qcom: document the SM8650 GPU Clock Controller e39f08bf115a dt-bindings: clock: qcom: document the SM8650 Display Clock Controller 076aa9fc05f3 dt-bindings: clock: qcom: document the SM8650 General Clock Controller abeff2c9f476 dt-bindings: clock: qcom: document the SM8650 TCSR Clock Controller 3714369ceebb dt-bindings: cache: qcom,llcc: Document the SM8650 Last Level Cache Controller cb0f1e272d52 dt-bindings: clock: qcom,gcc-msm8939: Add CSI2 related clocks 7ee4127b7a3f arm64: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp d380ef670205 Merge branch '20231026105345.3376-3-bryan.odonoghue@linaro.org' into arm64-for-6.8 30a292de3f9a Merge branch '20231026105345.3376-3-bryan.odonoghue@linaro.org' into clk-for-6.8 f007e023cbd5 dt-bindings: clock: Add SC8280XP CAMCC aec8967c6dce dt-bindings: clock: Use gcc.yaml for common clock properties 7c1eb93bd0d3 dt-bindings: clock: qcom,gcc-ipq6018: split to separate schema b6364ec8f82d dt-bindings: arm: qcom,ids: Add SoC ID for SM8650 3f482ad7991e arm64: dts: qcom: sm8550: Enable download mode register write fe077e894545 arm64: dts: qcom: sm8350: Add TCSR halt register space 956699ec82d4 arm64: dts: qcom: sm8250: Add TCSR halt register space e0bd046de230 arm64: dts: qcom: ipq5018: add few more reserved memory regions c38c43d3b995 arm64: dts: qcom: ipq5332: add missing properties to the GPIO LED node 0390c1ee5e11 arm64: dts: qcom: ipq9574: enable GPIO based LED 2f9b91c0cf6d arm64: dts: qcom: qrb2210-rb1: use USB host mode 2196010939c0 dt-bindings: firmware: qcom,scm: document SM8650 SCM Firmware Interface ae8a176c474a dt-bindings: soc: qcom: pmic-glink: document SM8650 compatible c3cb68af1e5d dt-bindings: soc: qcom,aoss-qmp: document the SM8560 Always-On Subsystem side channel a6ea4114f911 dt-bindings: mmc: mtk-sd: add tuning steps related property 30e4bc60ac6d dt-bindings: mfd: ti,am3359-tscadc: Allow dmas property to be optional 5c51588d48df dt-bindings: mfd: qcom,spmi-pmic: Add pm8916 vm-bms and lbc a03962f53dbd dt-bindings: mfd: qcom-spmi-pmic: Document PM8937 PMIC 81a2c830f173 dt-bindings: mfd: qcom,tcsr: Add compatible for sm8250/sm8350 fe50e0fb05fc dt-bindings: mfd: ams,as3711: Convert to json-schema 197c27b6cfaa arm64: dts: fsd: add specific compatibles for Tesla FSD 395fa67b6b72 Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64 5927c83d20c8 dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD 78e4ed4670d7 dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD c168df69f5a1 dt-bindings: serial: samsung: add specific compatible for Tesla FSD 6dedf66f0e8b dt-bindings: pwm: samsung: add specific compatible for Tesla FSD 457e5d03f14d dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD 4b7a14529669 dt-bindings: mmc: renesas,sdhi: Document RZ/Five SoC a135e0045af7 dt-bindings: mmc: arasan,sdci: Add gate property for Xilinx platforms d0ed6c92c98e dt-bindings: mmc: sdhci-of-dwcmhsc: Add T-Head TH1520 support f7a9df14027b dt-bindings: net: microchip,ksz: document microchip,rmii-clk-internal b81aa4a5992d media: dt-bindings: mediatek: Add phandle to mediatek,scp on MDP3 RDMA b80f939c4051 dt-bindings: iio/adc: qcom,spmi-vadc: clean up examples 44c4f2c40551 dt-bindings: iio/adc: qcom,spmi-vadc: fix example node names c57fab0a68f9 dt-bindings: iio/adc: qcom,spmi-rradc: clean up example f330b6a06a10 dt-bindings: iio/adc: qcom,spmi-iadc: clean up example d089bb38e3f6 dt-bindings: iio/adc: qcom,spmi-iadc: fix example node name d92310a0b805 dt-bindings: iio/adc: qcom,spmi-iadc: fix reg description 6afb70912c0a Merge tag 'renesas-dts-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt 77be7b2ec3d6 arm64: dts: ti: Add verdin am62 mallow board 5fe3785a98a1 dt-bindings: arm: ti: Add verdin am62 mallow board 7bf01a4e3239 ASoC: dt-bindings: fsl,xcvr: Adjust the number of interrupts 568ee5fdf77d dt-bindings: interconnect: Add Qualcomm SM6115 NoC 7549b7adec53 arm64: dts: ti: verdin-am62: Improve spi1 chip-select pinctrl 0b160138fdcc arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Remove HDMI Reset Line Name 42aed107725d arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add HDMI support 766ac2241c85 arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Lower I2C1 frequency bcf7dd5b8b09 arm64: dts: ti: phycore-am64: Add R5F DMA Region and Mailboxes e1dfb1eb87a4 riscv: dts: microchip: add the mpfs' system controller qspi & associated flash 59d2f723c14b dt-bindings: soc: microchip: add a property for system controller flash 4b452a4cfa9e ARM: dts: imx23/28: Remove undocumented "fsl,clkctrl" 485e1601cd25 ARM: dts: bcm2711: Add BCM2711 xHCI support 439353e944b0 dt-bindings: usb: xhci: Add support for BCM2711 4b95e8b40522 ARM: dts: imx28-lwe: Pass device_type to the memory node ea0431aa1757 ARM: dts: imx23/28: Remove unneeded "fsl,mxs-gpio" e63738dd96c8 ARM: dts: imx28-tx28: Pass #sound-dai-cells fc88878c01c0 arm64: dts: imx8mq-phanbell: make dts use gpio-fan matrix instead of array e21fe3809cd3 arm64: dts: freescale: verdin-imx8mp: add support to mallow board a75cfdc4a966 arm64: dts: freescale: verdin-imx8mm: add support to mallow board 3b7bee60295f arm64: dts: imx8mm-venice-gw7: Adjust PCI Ethernet nodes 5241ecb06203 dt-bindings: arm: fsl: add verdin imx8mp mallow board b80ecc880136 dt-bindings: arm: fsl: add verdin imx8mm mallow board ad1ae2498610 arm64: dts: imx8mm: Slow default video_pll1 clock rate 5aa830cec5a3 arm64: dts: imx8mm: Remove video_pll1 clock rate from clk node 110274d03548 arm64: dts: imx8mm: Simplify mipi_dsi clocks 99d898689e0b ARM: dts: imx7s: Add on-chip memory 29d17af3b09b ARM: dts: imx7: add MIPI-DSI support d9c25edf04ae scsi: ufs: dt-bindings: Add msi-parent for UFS MCQ dba1025f17d0 ARM: dts: nxp: Fix some common switch mistakes 4ea7b578957d arm64: dts: freescale: minor whitespace cleanup around '=' dbb52d93894b arm64: dts: imx8dxl-ss-ddr: change ddr_pmu0 compatible 941d70d2ae55 arm64: dts: tqma8mpql: Remove invalid/unused property ec00a410133c arm64: dts: imx8-ss-audio: Remove unexistent'shared-interrupt' 604139ed79f6 arm64: dts: imx93: Remove unexistent 'shared-interrupt' 7a445842e287 arm64: dts: imx8qxp-mek: Fix gpio-sbu-mux compatible 0c2122b767be arm64: dts: imx8mp-debix-model-a: Use phy-mode 2e9827c5e054 arm64: dts: imx8mm-nitrogen-r2: Fix I2C mux subnode name d1e22a0dfb43 arm64: dts: imx8dxl-ss-conn: Fix Ethernet interrupt-names order 6299d7ae35e5 arm64: dts: imx8mm-emcon-avari: Fix gpio-cells 9de3f32f3c7d arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names 6905c613057b arm64: dts: freescale: Add SKOV IMX8MP CPU revB board b20a05f3b464 arm64: dts: imx8mn-var-som-symphony: add vcc supply for PCA9534 a5a6af3c0bdd arm64: dts: freescale: introduce rve-gateway board 83600000758e arm64: dts: freescale: debix-som-a-bmb-08: Add CSI Power Regulators b5e632bcd082 arm64: dts: imx8-apalis: add can power-up delay on ixora board 9804057f0f96 arm64: dts: imx8mn-var-som: add fixed 3.3V regulator for EEPROM e3c93255cfdb arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodes 8357f0b7ae64 arm64: dts: imx8mp: Disable dsp reserved memory by default 3b2b78d127df arm64: dts: imx8mp: Add NPU Node b13969aeeefc arm64: dts: freescale: debix-som: Add heartbeat LED 5c6068a3aecc arm64: dts: freescale: Add dual-channel LVDS overlay for TQMa8MPxL 37dbfb74c066 arm64: dts: imx8mp-venice-gw74xx: remove unecessary propreties in tpm node 12f50b18b3a5 ARM: dts: nxp: minor whitespace cleanup around '=' 7e4a296e0073 ARM: dts: imx7d-colibri-emmc: Add usdhc aliases aac483d2d190 ARM: dts: imx6qdl-colibri: Add usdhc aliases 534d21c04c41 ARM: dts: imx6qdl-apalis: Add usdhc aliases 4105f51d0c63 ARM: dts: nxp: imx7d-pico: add cpu-supply nodes 4a5f36c1120b dt-bindings: arm: Add compatible for SKOV i.MX8MP RevB board 7efe4371f644 dt-bindings: arm: fsl: add RVE gateway board 3c86e357feb0 dt-bindings: vendor-prefixes: add rve 04660a3dbd9f ARM: dts: broadcom: Add BCM63138's high speed UART 2e36ee7e60cd arm64: dts: ti: k3-am62x: Add overlay for IMX219 8478bfdedc00 arm64: dts: ti: k3-am62a7-sk: Enable camera peripherals a361c10e44cc arm64: dts: ti: k3-am62x: Add overlays for OV5640 820399f7bf0f arm64: dts: ti: k3-am62x-sk: Enable camera peripherals 4de948eeb982 arm64: dts: ti: k3-am625-beagleplay: Add overlays for OV5640 8d6be01e5e7c arm64: dts: ti: k3-am62a-main: Enable CSI2-RX d52951f9d78a arm64: dts: ti: k3-am62-main: Enable CSI2-RX 4d667e27b3fd arm64: dts: ti: k3-am65: Add AM652 dtsi file 3d2161ed0c2b dt-bindings: perf: fsl-imx-ddr: Add i.MX8DXL compatible 189fe310f16e dt-bindings: clock: support i.MX93 ANATOP clock module b44d3f817227 ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx) b654e96c546e dt-bindings: display: simple: add Evervision VGG644804 panel 05a02c1a58e1 dt-bindings: ili9881c: Add Ampire AM8001280G LCD panel 96be0427a528 ARM: dts: rockchip: Move uart aliases to SoC dtsi for RK3128 18c0b8b47af4 ARM: dts: rockchip: Move i2c aliases to SoC dtsi for RK3128 0191774d40bb ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128 4b6344ed1b32 ARM: dts: rockchip: Add Sonoff iHost Smart Home Hub 3cbab293b053 dt-bindings: arm: rockchip: Add Sonoff iHost afacdf8be4db ARM: dts: rockchip: Add rv1109 SoC ad1e5ad721a5 ARM: dts: rockchip: Split up rgmii1 pinctrl on rv1126 fc0ef88ee0a1 ARM: dts: rockchip: Add i2c2 node to rv1126 bf739d2f67ae ARM: dts: rockchip: Serial aliases for rv1126 049605e5080d ARM: dts: rockchip: Add alternate UART pins to rv1126 59e8d345382e ARM: dts: rockchip: Enable GPU for XPI-3128 464bddcf0726 ARM: dts: rockchip: Add GPU node for RK3128 8af06043d850 ARM: dts: rockchip: Add power-controller for RK3128 8f65bb97112e dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel ed2d8407a82d dt-bindings: display: Document Himax HX8394 panel rotation 5319f5062c10 dt-bindings: display: simple: Add boe,bp101wx1-100 panel db09be0ff97b ARM: dts: imx6q-apalis: add can power-up delay on ixora board 31fdbd1cd6c6 dt-bindings: display: msm: document the SM8650 Mobile Display Subsystem 52e16372d1c6 dt-bindings: display: msm: document the SM8650 DPU 258f55b8a6c7 dt-bindings: display: msm-dsi-controller-main: document the SM8650 DSI Controller f06034e33173 dt-bindings: display: msm-dsi-phy-7nm: document the SM8650 DSI PHY e7cafbdafccf dt-bindings: display: msm: Add SDM670 MDSS 58504ed9c645 dt-bindings: display/msm: sdm845-dpu: Describe SDM670 d8b80f6fd0c5 dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible 0c71ce621111 arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name 0895f560a171 arm64: dts: ti: k3-am62a7-sk: Add interrupt support for IO Expander 696f6e8d6176 arm64: dts: ti: k3-am625-verdin: Enable Verdin UART2 145b9a5ffb00 arm64: dts: ti: k3-am62-main: Add gpio-ranges properties 0d95f5e22dde arm64: dts: ti: k3-am64: Enable SDHCI nodes at the board level 8ccabbb5322f arm64: dts: ti: k3-am65: Enable SDHCI nodes at the board level 4b9d0ee63df8 arm64: dts: ti: k3-am65: Add full compatible to dss-oldi-io-ctrl node b64af72b8e7b arm64: dts: ti: k3-j784s4: Add chipid node to wkup_conf bus a70ca898f980 arm64: dts: ti: k3-j721s2: Add chipid node to wkup_conf bus 638e0242808a arm64: dts: ti: k3-j721e: Add chipid node to wkup_conf bus 0b0e18c3dce2 arm64: dts: ti: k3-j7200: Add chipid node to wkup_conf bus 16b21e3cf2ea arm64: dts: ti: k3-am65: Add chipid node to wkup_conf bus ba6541592794 dt-bindings: iio: light: isl76682: Document ISL76682 3678e1e114f2 dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: add X1E80100 LPASS LPI 4854bb4b43e2 dt-bindings: pinctrl: pinctrl-single: add ti,j7200-padconf compatible 062b01e5c736 dt-bindings: iio: light: add support for Vishay VEML6075 3f170ed89d6f dt-bindings: usb: tps6598x: add reset-gpios property 69a424bfd498 dt-bindings: iio/adc: ti,palmas-gpadc: Drop incomplete example 5cf3c6e7327b dt-bindings: adi,ad5791: Add support for controlling RBUF 7a11d1470ed1 dt-bindings: display: bridge: lt8912b: Add power supplies 562bb8392ec6 spi: spl022: fix sleeping in interrupt context 83c535a1ec6b dt-bindings: iio: honeywell,mprls0025pa: drop ref from pressure properties 7cb202a1a899 dt-bindings: media: add bindings for stm32 dcmipp fce776c784a0 dt-bindings: media: Add bindings for THine THP7312 ISP 23c5bf41000e dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings e6429afd32f1 dt-bindings: vendor-prefixes: Add prefix for GalaxyCore Inc. d1287a3d111f dt-bindings: gpio: rockchip: add a pattern for gpio hogs e08aefe3ce14 Merge tag 'qcom-dts-for-6.7-2' into arm32-for-6.8 66862cc676b1 ARM: dts: qcom: Add support for HTC One Mini 2 ac27d4b5eaa6 Merge tag 'v6.7-rc4' into media_stage 8a745825682b arm64: dts: qcom: sm6350: Make watchdog bark interrupt edge triggered 4de273b8d5cf arm64: dts: qcom: sc8280xp: Make watchdog bark interrupt edge triggered 94d4ed6b0efb arm64: dts: qcom: sa8775p: Make watchdog bark interrupt edge triggered 9e80723d8b4f arm64: dts: qcom: sm8250: Make watchdog bark interrupt edge triggered ef5fa5d97caa arm64: dts: qcom: sm8150: Make watchdog bark interrupt edge triggered 3879bc4c1c04 arm64: dts: qcom: sdm845: Make watchdog bark interrupt edge triggered 8e7e69e2041a arm64: dts: qcom: sc7280: Make watchdog bark interrupt edge triggered 6584d8b4799e arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered 04f80707bc19 arm64: dts: qcom: sc8180x: drop duplicated PCI iommus property 04597b9d0b6f dt-bindings: arm: qcom: Add HTC One Mini 2 7ff927ff9139 dt-bindings: vendor-prefixes: document HTC Corporation fa70da0426ea arm64: dts: qcom: sm8550: correct TX Soundwire clock ed7e07a029d6 arm64: dts: qcom: sm8450: correct TX Soundwire clock 541ded0776d2 arm64: dts: qcom: sc8180x-primus: Fix HALL_INT polarity 39c752cf5603 arm64: dts: qcom: sc8280xp-crd: fix eDP phy compatible e5319a1187df arm64: dts: qcom: sdm632-fairphone-fp3: Enable LPASS daf6cf6a007f arm64: dts: qcom: msm8916-acer-a1-724: Add notification LED 2a186fbc9370 arm64: dts: qcom: ipq6018: use CPUFreq NVMEM 91d98fe1640a arm64: dts: qcom: msm8939-huawei-kiwi: Add initial device tree 6718a893d987 dt-bindings: arm: qcom: Add Huawei Honor 5X / GR5 (2016) f36c60304a90 arm64: dts: qcom: msm8953: Use non-deprecated qcom,domain in LPASS fa91149122fc arm64: dts: qcom: qrb2210-rb1: add wifi variant property 9862c76b6484 arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller 90510995b456 arm64: dts: qcom: qrb2210-rb1: Set up HDMI f168a1f5fd2a arm64: dts: qcom: qcm2290: Hook up interconnects a66c95bb5052 arm64: dts: qcom: qcm2290: Add display nodes 1b3d99e8ad9d arm64: dts: qcom: sc7280: Add the missing MDSS icc path 463b9cc7faa3 arm64: dts: qcom: sc7180: Add the missing MDSS icc path a2b32f52593b arm64: dts: qcom: sc8280xp: Add QMP handle to RPMh stats 0541077473ea dt-bindings: soc: qcom: stats: Add QMP handle 46fd383def7f arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node and enable usb otg 45ca7aacee21 arm64: dts: qcom: sm8250-xiaomi-elish: Fix typos 9dee357f1ff5 arm64: dts: qcom: msm8939-longcheer-l9100: Add proximity-near-level d6b8367dbb65 arm64: dts: qcom: qrb4210-rb2: Enable bluetooth 9e8fcdbc4d75 arm64: dts: qcom: sm6115: Add UART3 e88a0c4a9117 arm64: dts: qcom: sdm632-fairphone-fp3: Enable WiFi/Bluetooth a808b8c6d7f4 dt-bindings: arm: qcom: Fix html link 004244e4cbd5 arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts 3f55e77ebc86 arm64: dts: qcom: Add base qcm6490 idp board dts 9e08836a864f dt-bindings: arm: qcom: Add QCM6490 IDP and QCS6490 RB3Gen2 board c538a9224903 arm64: dts: qcom: sm4450-qrd: mark QRD4450 reserved gpios 34764956c2e4 arm64: dts: qcom: sm4450-qrd: add QRD4450 uart support b5fe030e21e0 arm64: dts: qcom: sm4450: add uart console support 76478ce29df3 arm64: dts: qcom: sm4450: Add RPMH and Global clock 52ea11ee57e9 arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node d42f9497ccad arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to GCC 9b98d0a1718e dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks 2417b30e3609 arm64: dts: qcom: msm8953: add SPI interfaces 66dd2b49a0b3 arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7325 thermals 0b651704285a arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMK7325 thermals 8630d7baedf5 arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals 959371b1b650 iio: adc: Add PM7325 PMIC7 ADC bindings b1e6472aae24 arm64: dts: qcom: sm8250: Add OPP table support to UFSHC 6aeff20d0bd6 arm64: dts: qcom: sdm845: Add OPP table support to UFSHC e8d1d500097e ARM: dts: qcom: msm8974: Add watchdog node 615027dbbe1d dt-bindings: arm: qcom: drop the IPQ board types ebb3e763ee5b arm64: dts: qcom: ipq5018: enable the CPUFreq support 3ca74e9810cf dt-bindings: clock: qcom,a53pll: add IPQ5018 compatible dcbafe8963f4 ARM: dts: qcom: sdx65: correct SPMI node name 98b030d58c93 ARM: dts: qcom: sdx65: add missing GCC clocks 07a16205d0e0 ARM: dts: qcom: sdx65: correct PCIe EP phy-names fe48cd5331dc dt-bindings: display: msm: Add reg bus and rotator interconnects 8c1892c5f696 dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat 7cfd5769a991 dt-bindings: display/msm: qcom, sm8150-mdss: correct DSI PHY compatible 91abf991ed4a dt-bindings: display/msm: qcom, sm8250-mdss: add DisplayPort controller node c203dee53e38 ARM: dts: rockchip: Enable gmac for XPI-3128 a31102a06882 ARM: dts: rockchip: Add gmac node for RK3128 d02bab784773 dt-bindings: gpu: mali-utgard: Add Rockchip RK3128 compatible 61b6b8e5340b dt-bindings: net: qcom,ipa: document SM8650 compatible a0fa8df10233 Merge tag 'renesas-pinctrl-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel 6c58c6977828 dt-bindings: gpio: modepin: Describe label property 7f00d1c96321 dt-bindings: display: ti: Add support for am62a7 dss 6bed64726635 arm64: dts: ti: k3-am68-sk-base-board: Add alias for MCU CPSW2G f494c9948974 arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG2 devices 403938b5222f arm64: dts: ti: iot2050: Refactor the m.2 and minipcie power pin 45e3b6aa9185 arm64: dts: ti: iot2050: Definitions for runtime pinmuxing b14c51a347fb arm64: dts: ti: iot2050: Drop unused ecap0 PWM 38f52ad2cea9 arm64: dts: ti: iot2050: Re-add aliases a84e54a6c2a0 arm64: dts: ti: k3-am62x-sk-common: Mark mcu gpio and mcu_gpio_intr as reserved 0baa456c51ce arm64: dts: ti: k3-am62p5-sk: Mark mcu gpio and mcu_gpio_intr as reserved 131aadfec025 arm64: dts: ti: k3-am642-evm/sk: Mark mcu_gpio_intr as reserved bbda0d8be30e arm64: dts: ti: k3-am64-main: Fix typo in epwm_tbclk node name 5e8876dba890 arm64: dts: ti: k3-am65-main: Fix DSS irq trigger type fd78a91dedf3 arm64: dts: ti: k3-am62a-main: Fix GPIO pin count in DT nodes 05614d5b4f00 arm64: dts: ti: minor whitespace cleanup around '=' ca6dff24071e ARM: dts: omap4-embt2ws: Add Bluetooth cff0864e2eea Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2a2ae1545117 dt-bindings: input: gpio-keys: Allow optional dedicated wakeirq aed93474ebc0 Merge patch series "Add Huashan Pi board support" 318917bad2c6 riscv: dts: sophgo: add Huashan Pi board device tree 8a2824be66df riscv: dts: sophgo: add initial CV1812H SoC device tree 3ff295494c04 riscv: dts: sophgo: cv18xx: Add gpio devices dfcd3e4c81d9 riscv: dts: sophgo: Separate compatible specific for CV1800B soc 8c5d4ad957fa dt-bindings: riscv: Add SOPHGO Huashan Pi board compatibles e393d2e6705e dt-bindings: timer: Add SOPHGO CV1812H clint 65cc6be0d442 dt-bindings: interrupt-controller: Add SOPHGO CV1812H plic dce8266bb548 ARM: dts: omap: logicpd-torpedo: do not disguise GNSS device 0f0cee70a881 ARM: dts: omap4-embt2ws: enable 32K clock on WLAN 33dfdcf03832 ARM: dts: ti/omap: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties aa5a9a109405 dt-bindings: power: meson-g12a-power: document ISP power domain a9f86a1f45b5 dt-bindings: marvell: Add Marvell MV88E6060 DSA schema 5024553a10f5 dt-bindings: marvell: Rewrite MV88E6xxx in schema ad4c44e96eec dt-bindings: net: ethernet-switch: Accept special variants 17baedd697fb dt-bindings: net: mvusb: Fix up DSA example 9c7ccdf2dc30 dt-bindings: net: dsa: Require ports or ethernet-ports 8adbf64f3cdd dt-bindings: input: mediatek,pmic-keys: Drop incomplete example cdc098b167e1 dt-bindings: input: sprd,sc27xx-vibrator: Drop incomplete example 0629a76a9d04 dt-bindings: correct white-spaces in examples 2f78b6dd5c42 dt-bindings: reset: hisilicon,hi3660-reset: Drop providers and consumers from example f835598ebf60 dt-bindings: arm/calxeda: drop unneeded quotes 0d2567437a54 dt-bindings: fsl,dpaa2-console: drop unneeded quotes 352ed027a423 dt-bindings: interrupt-controller: qcom,pdc: document pdc on X1E80100 df641036bac4 dt-bindings: qcom,pdc: document the SM8650 Power Domain Controller 1e17b2ba4499 dt-bindings: interrupt-controller: Add SDX75 PDC compatible c0aff4abb03a dt-bindings: reset: imx-src: Simplify compatible schema and drop unneeded quotes df20c9f94014 dt-bindings: reset: qcom: drop unneeded quotes 1516b28c7069 dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/Five SoC a80bc27a0fe8 dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller 0b8db84ecfc4 ASoC: Intel: Soundwire related board and match updates 303600aff1ef Merge v6.7-rc3 into drm-next d03f6dca688d arm64: dts: rockchip: Use NCM6A-IO board for edgeble-neu6b 2dcf7dbe2812 dt-bindings: arm: rockchip: Update edgeble-neu6 bindings b2a45d98f95b arm64: dts: rockchip: add USB3 host on rk3588s-orangepi-5 766aa3119c2f ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617 3ea15a23d9c7 ARM: dts: motorola-mapphone: Move handset devices to a common file 5127524f7e6f ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894 7e16bd264a3a dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets 7d420d843f98 ARM: dts: renesas: r9a06g032: Add missing space in compatible 0faa59be192f arm64: dts: renesas: r9a09g011: Add missing space in compatible 807cfe5cde5c dt-bindings: phy: add compatible for Mediatek MT8195 c52707b1bf77 dt-bindings: phy: amlogic,g12a-mipi-dphy-analog: drop unneeded reg property and example 34ec5dda2a01 dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: drop text about parent syscon and drop example f738d7a9dfab dt-bindings: iommu: dart: Add t8103-usb4-dart compatible 2c963cfa7e8e ARM: dts: renesas: armadillo800eva: Add LCD panel a35135dad31c dt-bindings: pinctrl: renesas: Drop unneeded quotes d5212619f0a0 ARM: dts: renesas: r8a7740: Add LCDC nodes 048bdb67a0f6 arm64: dts: renesas: draak: Move HDMI bus properties to correct node ab52a67f9767 arm64: dts: renesas: draak: Make HDMI the default video input dab3ba03f28c Merge 6.7-rc3 into usb-next ec6cd76a8793 arm64: dts: meson-axg: jethub-jxx add support for EEPROM 2da076589eac arm64: dts: amlogic: meson-axg: pinctrl node for NAND cdc5df918882 arm64: dts: amlogic: minor whitespace cleanup around '=' a5dead35fc4b arm64: dts: Add watchdog node for Amlogic S4 SoCs 37c5369b4667 arm64: dts: Add watchdog node for Amlogic C3 SoCs 1d8b2a265b81 dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl 9556e1708419 ARM: dts: imx7s: Add DMA channels for CSPI peripherals c1e5b6c6855f arm64: dts: imx8mp-venice-gw72xx: add TPM device fc1ee0050ce4 arm64: dts: imx8mm-venice-gw72xx: add TPM device 5a125bf20bf1 arm64: dts: imx93: update anatop node 292fc296ecdd arm64: dts: imx93-11x11-evk: add 12 ms delay to make sure the VDD_SD power off b81451d8d4d3 arm64: dts: imx93: change tuning start to get a large scan range for standard tuning 7ee940495143 arm64: dts: imx93-11x11-evk: set SION for cmd and data pad of USDHC 1b2037987962 arm64: dts: imx8mp: Describe M24C32-D write-lockable page in DH i.MX8MP DHCOM DT 94d5d7d36ba8 ARM: dts: imx6ul: mba6ulx: fix typo in comments cbbed6036bfe ARM: dts: imx6qdl: mba6: fix typo in comments e6c50d6fd99e arm64: dts: imx8mp-beacon-kit: Enable DSI to HDMI Bridge 3743277142d0 arm64: dts: imx8mm: Add CCM interrupts 663758efb819 arm64: dts: imx8mn: Add CCM interrupts 88774bafda13 arm64: dts: imx8mp: Add CCM interrupts e4d9f4208c6c ARM: dts: imx7s: Add missing #thermal-sensor-cells e4c3f040fee6 ARM: dts: imx7s: Fix nand-controller #size-cells 62a7c97c7c3f ARM: dts: imx7s: Fix lcdif compatible 9f3037b332bf ARM: dts: imx7d: Fix coresight funnel ports d844fe5270b1 arm64: dts: freescale: add initial device tree for MBa93xxCA starter kit ad161fbd54ca arm64: dts: freescale: tqma9352-mba93xxla: add 'chassis-type' property 8ec09c8f530c arm64: dts: imx93: Configure clock rate for audio PLL 9d7ba48273ea arm64: dts: imx93: Add audio device nodes b1553710809c dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator 471ace1f09be dt-bindings: gpio: brcmstb: drop unneeded quotes f8159413e6f1 ARM: dts: ti: keystone: minor whitespace cleanup around '=' 381a63044158 dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids c1ad3e49f07c dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids c8fb56a76774 dt-bindings: dma: qcom,gpi: document the SM8650 GPI DMA Engine 8e868f10ea21 dt-bindings: dma: rz-dmac: Document RZ/Five SoC e1504d7602c0 dt-bindings: net: qcom,ipa: add SM8550 compatible f118e169a194 dt-bindings: dma: qcom: gpi: add compatible for X1E80100 11518ff4d13c dt-bindings: pinctrl: qcom: Add X1E80100 pinctrl d3fe1008f0c8 ASoC: dt-bindings: correct white-spaces in examples f9b11918132f dt-bindings: crypto: convert Inside Secure SafeXcel to the json-schema 52b8a84c5283 dt-bindings: dma: ti: k3-udma: Describe cfg register regions 9b2e4fa1e7f2 dt-bindings: dma: ti: k3-pktdma: Describe cfg register regions 6d91e2a3766b dt-bindings: dma: ti: k3-bcdma: Describe cfg register regions ea1d92699d2a dt-bindings: dma: ti: k3-*: Add descriptions for register regions 7cf45f021d31 arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller dc0e2a7e69c2 arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers 185cc3e40c9f dt-bindings: pinctrl: samsung: use Exynos7 fallbacks for newer wake-up controllers 54829849af39 Merge branch 'icc-x1e80100' into icc-next 8e2202f335a4 dt-bindings: interconnect: Add Qualcomm X1E80100 SoC 54f1f68e019b dt-bindings: interconnect: qcom-bwmon: document SM8650 BWMONs 4e7bf80ce812 dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM8650 SoC 615397ecb02b Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net e673bd9cbb13 dt-bindings: serial: fsl-linflexuart: change the maintainer email address f79b00fe4cab dt-bindings: serial: renesas,sci: Document RZ/Five SoC 911d5cce2a4e Merge tag 'drm-misc-next-2023-11-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next ab1f350663b1 dt-bindings: power: rpmpd: Update part number to X1E80100 6fe8e1a8dc99 dt-bindings: backlight: mp3309c: Remove two required properties cc4e22233cb5 dt-bindings: usb: qcom,dwc3: adjust number of interrupts on SM6125 9161184d7271 dt-bindings: net: renesas,ethertsn: Add Ethernet TSN 788d52642da4 Merge tag 'v6.7-rc2' into media_stage d2975fb00035 dt-bindings: gpu: Add Imagination Technologies PowerVR/IMG GPU 59078ccb21d1 dt-bindings: usb: qcom,dwc3: document the SM8560 SuperSpeed DWC3 USB controller 627316c016dd dt-bindings: usb: renesas,usbhs: Document RZ/Five SoC 99b07ecabc3d dt-bindings: cache: sifive,ccache0: Add StarFive JH7100 compatible 0118ff6d8abd ASoC: dt-bindings: fsl,mqs: Convert format to json-schema 0a9a12593184 ASoC: dt-bindings: sound-card-common: List sound widgets ignoring system suspend 165648aad162 ARM: dts: stm32: add SPI support on STM32F746 8f3fa20269a0 ARM: dts: stm32: add STM32F746 syscfg clock dc50601ba2d8 dt-bindings: net: xlnx,axi-ethernet: Introduce DMA support 72d23e1de1b0 arm64: dts: imx8mp: Add reserve-memory nodes for DSP 9bab315d31f8 spi: axi-spi-engine improvements 23a75f159231 ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-disco 4656437906e9 ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128 25251d661471 ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128 2d36fa2aa286 ARM: dts: rockchip: Add USB host clocks for RK3128 4e1bd401bbe3 ARM: dts: rockchip: Add Geniatech XPI-3128 RK3128 board 7e6458d9a7f3 ARM: dts: rockchip: Add sdmmc_det pinctrl for RK3128 12867f1ccb42 dt-bindings: arm: rockchip: Add Geniatech XPI-3128 fda729bcbd69 arm64: dts: rockchip: Add Powkiddy RK2023 317a36f59e1b arm64: dts: rockchip: Update powkiddy,rgb30 include to rk2023 DTSI dc9a81379af6 dt-bindings: arm: rockchip: Add Powkiddy RK2023 70a31fd9ffa3 dt-bindings: spi: axi-spi-engine: convert to yaml b68504144dbe Merge tag 'drm-misc-next-2023-11-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next 8260e721d1b5 dt-bindings: display: nv3051d: Update NewVision NV3051D compatibles 0a502f9716cc arm64: dts: renesas: rzg3s-smarc: Enable SDHI1 eccf7ee1aefe arm64: dts: renesas: rzg3s-smarc-som: Enable SDHI2 fbd14cd9ff35 ARM: dts: microchip: sam9x60ek: Add IRQ support for ethernet PHY c86d9749ca2a ARM: dts: microchip: sam9x60_curiosity: Add IRQ support for ethernet PHY 1e1f6887a01b arm64: dts: allwinner: h616: add Orange Pi Zero 2W support 5795c68b5edc dt-bindings: arm: sunxi: add Orange Pi Zero 2W a5b7fa02fbde dt-bindings: crypto: qcom,prng: document SM8650 53be5450f8ac dt-bindings: crypto: qcom-qce: document the SM8650 crypto engine e65dc233e98b dt-bindings: crypto: qcom,inline-crypto-engine: document the SM8650 ICE d2a2bd80cca6 dt-bindings: net: renesas,etheravb: Document RZ/Five SoC f491b5315b58 dt-bindings: Document Marvell Aquantia PHY 7b52e889e53f arm64: dts: rockchip: add analog audio to RK3588 EVB1 92de4720f37c spi: dt-bindings: renesas,rspi: Document RZ/Five SoC 6e54c4bd7590 ASoC: dt-bindings: renesas,rz-ssi: Document RZ/Five SoC 87bb03481662 dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property 91e2c8ceb4de dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property f9fe5526efd5 dt-bindings: iio: Add MCP9600 thermocouple EMF converter 9942ece9d870 dt-bindings: iio: imu: Add Bosch BMI323 49d380d6e152 dt-bindings: adc: provide max34408/9 device tree binding document 895869158303 dt-bindings: media: wave5: add yaml devicetree bindings 77bf61c28407 dt-bindings: arm: Add support for DSB MSR register 18adf91da0ca dt-bindings: arm: Add support for DSB element size 075ac55ca93b dt-bindings: phy: qcom,snps-eusb2: document the SM8650 Synopsys eUSB2 PHY fda8409f7058 dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: document the SM8650 QMP USB/DP Combo PHY b0b6815d9143 dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: document the SM8650 QMP PCIe PHYs db24b834638a dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the SM8650 QMP UFS PHY 6a737e056a8b media: dt-bindings: Add JH7110 Camera Subsystem 716cbea9d35a dt-bindings: power: reset: $ref reboot-mode in nvmem-reboot-mode c8dedfdf167b dt-bindings: power: reset: $ref reboot-mode in syscon-reboot-mode 6c14a95472bb ARM: dts: samsung: s5pv210: fix camera unit addresses/ranges 866767db6bbb ARM: dts: samsung: exynos4: fix camera unit addresses/ranges f0d3848e2cef ARM: dts: samsung: exynos4x12: replace duplicate pmu node with phandle dc6ff9889013 dt-bindings: w1: Add AMD AXI w1 host and MAINTAINERS entry a8a9188e96a6 dt-bindings: power: fsl,scu-pd: Document imx8dl f06b78172daa dt-bindings: qcom,pdc: Add compatible for SM8550 7a87643120eb dt-bindings: input: samsung,s6sy761: convert to DT schema e4ccdd770c53 Merge branch 'for-v6.8/samsung-bindings-compatibles' into next/dt64 7b213bd80e13 dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible 892b87e000d2 dt-bindings: arm: samsung: Document exynosautov920 SADK board binding ce1b89aee7ea dt-bindings: pwm: samsung: add exynosautov920 compatible 5e6bd42714ad dt-bindings: serial: samsung: add exynosautov920-uart compatible 3ea12f0eff84 dt-bindings: samsung: usi: add exynosautov920-usi compatible 5b6e042a72b8 dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible 2dff85192843 dt-bindings: samsung: exynos-sysreg: add exynosautov920 sysreg 3123103c12c0 dt-bindings: pinctrl: samsung: add exynosautov920 5b929ffdc9be arm64: dts: exynos: add gpio-key node for exynosautov9-sadk 6bc5effbe8dd arm64: dts: exynosautov9: add specific compatibles to several blocks 25addf827769 arm64: dts: exynos850: add specific compatibles to several blocks 5ab70c11f08f arm64: dts: exynos7885: add specific compatibles to several blocks f7c77a1ea95a arm64: dts: exynos7: add specific compatibles to several blocks 56493af64c01 arm64: dts: exynos5433: add specific compatibles to several blocks 3530786802b6 dt-bindings: pwm: samsung: add specific compatibles for existing SoC 97419692fe3c ASoC: dt-bindings: samsung-i2s: add specific compatibles for existing SoC 7081448ca2cf dt-bindings: iio: samsung,exynos-adc: add specific compatibles for existing SoC 973115e1f51f dt-bindings: gpu: arm,mali-midgard: add specific compatibles for existing Exynos SoC 6b99281097f0 dt-bindings: samsung: exynos-pmu: add specific compatibles for existing SoC a893a294345b dt-bindings: serial: samsung: add specific compatibles for existing SoC 2a3d0691d56f dt-bindings: rtc: s3c-rtc: add specific compatibles for existing SoC 7e49408d51e6 dt-bindings: pinctrl: samsung: add specific compatibles for existing SoC 1bb1eca74ad5 Merge drm/drm-next into drm-misc-next e9731895ee20 dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatibles for existing SoC 33b5aa8f7d9a ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name fa1f536e3df0 ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name 4e5382dc8820 ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel 6be6ba7888ef ARM: dts: qcom: pm8921: Disable keypad by default 5917ae72cd70 ARM: dts: qcom: msm8974: move regulators to board files 551cbcd2547c ARM: dts: qcom: msm8960: drop useless rpm regulators node 6d9878cc6a6a ARM: dts: qcom: msm8660: move RPM regulators to board files d0ed11e33ba0 ARM: dts: qcom: mdm9615: move RPM regulators to board files 1c636116afea ARM: dts: qcom: apq8064: move RPM regulators to board files b9d11fecae9e ARM: dts: qcom: pm8058: switch to interrupts-extended e8a26b432fd4 ARM: dts: qcom: pm8018: switch to interrupts-extended 86831cb445f6 ARM: dts: qcom: pm8921: switch to interrupts-extended 6d6c0b95e077 ARM: dts: qcom: pm8058: use defined IRQ flags 9d0903209824 ARM: dts: qcom: pm8921: move reg property 6a63db48b660 ARM: dts: qcom: pm8018: move reg property 9d6af1dd4790 ARM: dts: qcom: pm8921: reorder nodes 5db5515193a6 ARM: dts: qcom: pm8058: reorder nodes d4df6f1babb5 ARM: dts: qcom: msm8660: split PMIC to separate dtsi files c56480ffb4b8 ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files f8574d2c7c62 ARM: dts: qcom: apq8064: split PMICs to separate dtsi files 298695290d90 ARM: dts: qcom: msm8960: split PMIC to separate dtsi files 1c3c930ec46c ARM: dts: qcom: msm8960: move PMIC interrupts to the board files 7f5541db889f ARM: dts: qcom: msm8660: move PMIC interrupts to the board files 812cfe71b26a ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files f5c8a18b7116 ARM: dts: qcom: apq8064: move PMIC interrupts to the board files b7510b8da2f6 ARM: dts: qcom: msm8960: fix PMIC node labels 6475671dcca1 ARM: dts: qcom: msm8660: fix PMIC node labels 4dfac4d841ef ARM: dts: qcom: mdm9615: fix PMIC node labels 07091c1b87fb ARM: dts: qcom: apq8064: fix PMIC node labels 155004433670 ARM: dts: qcom: strip prefix from PMIC files 21220b16b281 ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses 3d3f8059a9f6 ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place b9d136b033b8 ARM: dts: qcom: msm8660-surf: use keypad label directly fc4f79da1abe ARM: dts: qcom: msm8960: introduce label for PMIC keypad 0e33f3448e7c ARM: dts: qcom: apq8064: correct XOADC register address 9bed8b24890a ARM: dts: qcom-sdx65: switch USB QMP PHY to new style of bindings edfbe32172f4 ARM: dts: qcom-sdx55: switch USB QMP PHY to new style of bindings c709366fb89e arm64: dts: qcom: sm8350: switch USB QMP PHY to new style of bindings 29a99a6d955d arm64: dts: qcom: sm8250: switch USB QMP PHY to new style of bindings e13f8dc0ea91 arm64: dts: qcom: sm8150: switch USB QMP PHY to new style of bindings bed6aed8ceec arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings 7cb8dff829b0 arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings 77a8ce42cb30 arm64: dts: qcom: msm8996: switch USB QMP PHY to new style of bindings b92a18870b3e arm64: dts: qcom: ipq8074: switch USB QMP PHY to new style of bindings 18dd153b1c8f arm64: dts: qcom: ipq6018: switch USB QMP PHY to new style of bindings ad3769d7933c Merge tag 'qcom-arm64-for-6.7-2' into arm64-for-6.8 8088e683c89b dt-bindings: i2c: samsung,s3c2410-i2c: add specific compatibles for existing SoC c15df41a0c35 dt-bindings: i2c: exynos5: add specific compatibles for existing SoC d755df63e9df dt-bindings: hwinfo: samsung,exynos-chipid: add specific compatibles for existing SoC 6f4cb3f40711 arm64: dts: renesas: rzg2lc-smarc-som: Enable 4-bit tx support 5ddba1791b2b arm64: dts: renesas: rzg2l-smarc-som: Enable 4-bit tx support 75b8e7f58abe regulator: add under-voltage support (part 2) 791f1550a798 Add DMIC slew rate controls e128625eb7cb dt-bindings: pinctrl: document the SM8650 Top Level Mode Multiplexer c3c85cc965c8 dt-bindings: pinctrl: qcom,sm8650-lpass-lpi-pinctrl: add SM8650 LPASS 6da3c9fd1509 ARM: dts: renesas: marzen: Rename keyboard nodes 2d7a77894ba8 ARM: dts: renesas: iwg22d-sodimm: Fix stmpe node names f4c62eb4fbd6 arm64: dts: renesas: Add missing ADV751[13] power supply properties a94c426db9b8 ARM: dts: renesas: Add missing ADV751[13] power supply properties f213adc3b192 ARM: dts: renesas: rcar-gen2: Fix I2C bus demux node names 127c56414e9f riscv: dts: renesas: Convert isa detection to new properties 9836c1c69324 ARM: dts: renesas: blanche: Add FLASH node d446795daa00 ARM: dts: renesas: marzen: Add FLASH node 9a4a8a78013a spi: add stm32f7-spi compatible e74e9793f9c7 regulator: dt-bindings: Add 'regulator-uv-less-critical-window-ms' property eafbf4f37d51 regulator: dt-bindings: Allow system-critical marking for fixed-regulator 52381ed5b4ac regulator: dt-bindings: Add system-critical-regulator property ec8f058714a6 dt-bindings: regulator: qcom,smd-rpm-regulator: Document PM8937 IC cf118cc80e89 dt-bindings: regulator: qcom,spmi-regulator: Document PM8937 PMIC 2ae471b5eeb2 ASoC: dt-bindings: use "soundwire" as controller's node name in examples caa17228e281 ASoC: dt-bindings: qcom,sm8250: add SM8550 sound card 2d2f997a2bdc dt-bindings: es8328: convert to DT schema format 68e113702391 ASoC: dt-bindings: Simplify port schema eac536a576c7 ASoC: dt-bindings: nau8821: Add DMIC slew rate. 409f501ee9b2 dt-bindings: gpu: v3d: Add BCM2712's compatible 22f7441e8685 dt-bindings: display: ssd132x: Remove '-' before compatible enum a3de98e60ec5 ARM: dts: qcom: add device tree for Nokia Lumia 830 9ad6bcd4499d ARM: dts: qcom: add device tree for Nokia Lumia 735 41ee9ea2aefd ARM: dts: qcom: add device tree for Microsoft Lumia 640 XL 0dc127c0d612 ARM: dts: qcom: add device tree for Microsoft Lumia 640 d30c995f440e ARM: dts: qcom: add common dt for MSM8x26 Lumias along with Nokia Lumia 630 ed92546211d5 dt-bindings: arm: qcom: Document MSM8x26-based Lumia phones d783936fa1dc arm64: dts: qcom: msm8939-longcheer-l9100: Enable RGB LED b14cb550d720 arm64: dts: qcom: msm8916-longcheer-l8910: Enable RGB LED 183a2f447424 arm64: dts: qcom: msm8939-samsung-a7: Add sound and modem 9b7d68606781 arm64: dts: qcom: msm8916-samsung-j5: Add sound and modem f382f197e0c5 arm64: dts: qcom: msm8916-samsung-gt5: Add sound and modem 59a815c1572d arm64: dts: qcom: msm8916-longcheer-l8910: Add sound and modem 582b4cfec9a9 ARM: dts: qcom: msm8226: provide dsi phy clocks to mmcc 1703230be2a6 ARM: dts: qcom: msm8974: sort nodes by reg e23f302820cb ARM: dts: qcom: msm8974: replace incorrect indentation in interconnect 373015625e6b arm64: dts: qcom: msm8916-longcheer-l8150: Add sound and modem c1a66861dc32 arm64: dts: qcom: msm8916-asus-z00l: Add sound and modem 489f91f0dfcc arm64: dts: qcom: msm8916-alcatel-idol347: Add sound and modem 2f81e02a3b04 arm64: dts: qcom: msm8916-wingtech-wt88047: Add sound and modem 07047876d71e arm64: dts: qcom: msm8916-samsung-serranove: Add sound and modem 1d94420f32b0 arm64: dts: qcom: msm8916-samsung-a2015: Add sound and modem 9334b10d351c arm64: dts: qcom: msm8916: Add common msm8916-modem-qdsp6.dtsi 30b857e0f639 arm64: dts: qcom: msm8939: Add QDSP6 5b210c47425a arm64: dts: qcom: msm8916: Add QDSP6 f1aed61c2c48 arm64: dts: qcom: msm8939: Add BAM-DMUX WWAN 702f57c12856 arm64: dts: qcom: sc8280xp-x13s: add missing camera LED pin config d21fc2d89cfd arm64: dts: qcom: pm7250b: Use correct node name for gpios ecc4cb08c0f3 arm64: dts: qcom: sc7280: Add Camera Control Interface busses c01ef95e3aa7 arm64: dts: qcom: sdm845-xiaomi-beryllium: enable flash led fe3ccb41dafa arm64: dts: qcom: sdm845-oneplus: enable flash LED 0f6538f89c64 arm64: dts: qcom: sc8280xp-x13s: Use the correct DP PHY compatible c9e8e85b1afd arm64: dts: qcom: msm8916-*: Fix alphabetic node order 9e38e840740d arm64: dts: qcom: msm8939-longcheer-l9100: Enable wcnss_mem 5cdb05e593ef arm64: dts: qcom: msm8916-samsung-gt5: Enable GPU 0d72dfbbf352 arm64: dts: qcom: ipq5332: include the GPLL0 as clock provider for mailbox 13c545bfe884 arm64: dts: qcom: ipq9574: include the GPLL0 as clock provider for mailbox 8b57686e7ad0 arm64: dts: qcom: ipq6018: include the GPLL0 as clock provider for mailbox 11d8f7a1bf44 arm64: dts: qcom: ipq8074: include the GPLL0 as clock provider for mailbox 9b0b036ea0de arm64: dts: qcom: ipq9574: populate the opp table based on the eFuse f3636ba1edce arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse 8831b26a6579 arm64: dts: qcom: sdm670: add specific cpufreq compatible 8ce87f299cdb arm64: dts: qcom: sm8150: extend the size of the PDC resource b3cbe4ff9c30 arm64: dts: qcom: ipq5018: add QUP1 SPI controller f330c2991aa0 arm64: dts: qcom: qrb4210-rb2: don't force usb peripheral mode daa68cbafb06 arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC 6232143457ae arm64: dts: qcom: sa8775p: Add RPMh sleep stats 973959c2edf1 arm64: dts: qcom: sc7280: Add ports subnodes in usb/dp qmpphy node 4c021a56b758 arm64: dts: qcom: sm6375-pdx225: Add USBPHY regulators 6fb033b4f60e arm64: dts: qcom: sm6375-pdx225: Enable ATH10K WiFi fa14ce25949b arm64: dts: qcom: sm6375-pdx225: Enable MSS e77ac5cceb8e arm64: dts: qcom: sm6375: Add UART1 dec2e7998de5 arm64: dts: qcom: ipq9574: Enable WPS buttons d3619641203e arm64: dts: qcom: ipq9574: Add common RDP dtsi file 9faa71835343 arm64: dts: qcom: ipq5018: Enable USB 71275274da1f arm64: dts: qcom: ipq5018: Add USB related nodes af8b25f21479 arm64: dts: qcom: sc7280: add TRNG node 00e1b06bb47a arm64: dts: qcom: sa8775p: add TRNG node ac7c5d2655a7 arm64: dts: qcom: sm8450: add TRNG node 0087dcd6513a arm64: dts: qcom: sm8550: add TRNG node git-subtree-dir: dts/upstream git-subtree-split: b35b9bd1d4eed2acf8bc38ec5b1b6eef6261b4f0

commit: 93743d241c64bc1f7ecbf3262d1683176551e11f [log] [tgz]
author: Tom Rini <trini@konsulko.com> Mon Apr 01 09:08:13 2024 -0400
committer: Tom Rini <trini@konsulko.com> Mon Apr 01 09:08:13 2024 -0400
tree: 11abd1331cf3b50d686ebe65a24e69373bac27e4
parent: 53633a893a06bd5a0c807287d9cc29337806eaf7 [diff]
diff --git a/src/arm64/qcom/ipq5018-rdp432-c2.dts b/src/arm64/qcom/ipq5018-rdp432-c2.dts
index e636a1c..8460b53 100644
--- a/src/arm64/qcom/ipq5018-rdp432-c2.dts
+++ b/src/arm64/qcom/ipq5018-rdp432-c2.dts

@@ -67,6 +67,18 @@
 	};
 };
 
+&usb {
+	status = "okay";
+};
+
+&usb_dwc {
+	dr_mode = "host";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <24000000>;
 };

diff --git a/src/arm64/qcom/ipq5018.dtsi b/src/arm64/qcom/ipq5018.dtsi
index 38ffdc3..32b178b 100644
--- a/src/arm64/qcom/ipq5018.dtsi
+++ b/src/arm64/qcom/ipq5018.dtsi

@@ -5,6 +5,7 @@
  * Copyright (c) 2023 The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
@@ -36,6 +37,8 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		CPU1: cpu@1 {
@@ -44,6 +47,8 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		L2_0: l2-cache {
@@ -54,6 +59,23 @@
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
@@ -82,6 +104,24 @@
 		#size-cells = <2>;
 		ranges;
 
+		bootloader@4a800000 {
+			reg = <0x0 0x4a800000 0x0 0x200000>;
+			no-map;
+		};
+
+		sbl@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
 		tz_region: tz@4ac00000 {
 			reg = <0x0 0x4ac00000 0x0 0x200000>;
 			no-map;
@@ -94,6 +134,19 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usbphy0: phy@5b000 {
+			compatible = "qcom,ipq5018-usb-hsphy";
+			reg = <0x0005b000 0x120>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -129,6 +182,12 @@
 			#power-domain-cells = <1>;
 		};
 
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x7804000 0x1000>;
@@ -146,6 +205,16 @@
 			status = "disabled";
 		};
 
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1d000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x078af000 0x200>;
@@ -153,9 +222,64 @@
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
+		usb: usb@8af8800 {
+			compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB0_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
@@ -189,6 +313,24 @@
 			clocks = <&sleep_clk>;
 		};
 
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5018-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq5018-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board_clk>;
+			clock-names = "xo";
+		};
+
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0b120000 0x1000>;

diff --git a/src/arm64/qcom/ipq5332-rdp-common.dtsi b/src/arm64/qcom/ipq5332-rdp-common.dtsi
index 4870cdb..b37ae77 100644
--- a/src/arm64/qcom/ipq5332-rdp-common.dtsi
+++ b/src/arm64/qcom/ipq5332-rdp-common.dtsi

@@ -9,6 +9,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "ipq5332.dtsi"
 
 / {
@@ -39,6 +40,8 @@
 		pinctrl-names = "default";
 
 		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
 			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";

diff --git a/src/arm64/qcom/ipq5332-rdp441.dts b/src/arm64/qcom/ipq5332-rdp441.dts
index e89e2e9..8464138 100644
--- a/src/arm64/qcom/ipq5332-rdp441.dts
+++ b/src/arm64/qcom/ipq5332-rdp441.dts

@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";

diff --git a/src/arm64/qcom/ipq5332-rdp442.dts b/src/arm64/qcom/ipq5332-rdp442.dts
index efd480a..ed8a54e 100644
--- a/src/arm64/qcom/ipq5332-rdp442.dts
+++ b/src/arm64/qcom/ipq5332-rdp442.dts

@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";

diff --git a/src/arm64/qcom/ipq5332-rdp474.dts b/src/arm64/qcom/ipq5332-rdp474.dts
index eb1fa33..d5f99e7 100644
--- a/src/arm64/qcom/ipq5332-rdp474.dts
+++ b/src/arm64/qcom/ipq5332-rdp474.dts

@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";

diff --git a/src/arm64/qcom/ipq5332.dtsi b/src/arm64/qcom/ipq5332.dtsi
index d3fef2f..42e2e48 100644
--- a/src/arm64/qcom/ipq5332.dtsi
+++ b/src/arm64/qcom/ipq5332.dtsi

@@ -91,13 +91,21 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
-		opp-1488000000 {
-			opp-hz = /bits/ 64 <1488000000>;
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+		};
 	};
 
 	pmu {
@@ -163,6 +171,11 @@
 			reg = <0x000a4000 0x721>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@1d {
+				reg = <0x1d 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -390,8 +403,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo_board>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 

diff --git a/src/arm64/qcom/ipq6018.dtsi b/src/arm64/qcom/ipq6018.dtsi
index e59b9df..61c8fd4 100644
--- a/src/arm64/qcom/ipq6018.dtsi
+++ b/src/arm64/qcom/ipq6018.dtsi

@@ -96,42 +96,49 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&cpu_speed_bin>;
 		opp-shared;
 
 		opp-864000000 {
 			opp-hz = /bits/ 64 <864000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -236,31 +243,26 @@
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x00078000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x00078000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "gcc_usb0_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
-				      <0x0 0x00078400 0x0 0x200>, /* Rx */
-				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
-				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: qusb@79000 {
@@ -314,6 +316,11 @@
 			reg = <0x0 0x000a4000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@135 {
+				reg = <0x135 0x1>;
+				bits = <7 1>;
+			};
 		};
 
 		prng: qrng@e3000 {
@@ -439,6 +446,26 @@
 			qcom,ee = <0>;
 		};
 
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78af000 0x0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b0000 0x0 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart3: serial@78b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x0 0x078b1000 0x0 0x200>;
@@ -449,6 +476,36 @@
 			status = "disabled";
 		};
 
+		blsp1_uart4: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b2000 0x0 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b3000 0x0 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b4000 0x0 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -477,6 +534,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b9000 0x0 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -557,7 +628,7 @@
 					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
 					       <133330000>,
-					       <20000000>;
+					       <24000000>;
 
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
@@ -566,7 +637,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x0 0x08a00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				clocks = <&xo>;
 				clock-names = "ref";
@@ -611,8 +682,8 @@
 			compatible = "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0 0x0b111000 0x0 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
@@ -731,7 +802,7 @@
 			};
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq6018";
 			reg = <0x0 0x20000000 0x0 0xf1d>,
 			      <0x0 0x20000f20 0x0 0xa8>,
@@ -759,10 +830,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,

diff --git a/src/arm64/qcom/ipq8074.dtsi b/src/arm64/qcom/ipq8074.dtsi
index 2f275c8..2644144 100644
--- a/src/arm64/qcom/ipq8074.dtsi
+++ b/src/arm64/qcom/ipq8074.dtsi

@@ -125,32 +125,26 @@
 
 		ssphy_1: phy@58000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00058000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00058000 0x1000>;
 
 			clocks = <&gcc GCC_USB1_AUX_CLK>,
-				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB1_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_1_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB1_PHY_BCR>,
-				<&gcc GCC_USB3PHY_1_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@58200 {
-				reg = <0x00058200 0x130>,     /* Tx */
-				      <0x00058400 0x200>,     /* Rx */
-				      <0x00058800 0x1f8>,     /* PCS */
-				      <0x00058600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB1_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_1_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_1: phy@59000 {
@@ -168,32 +162,26 @@
 
 		ssphy_0: phy@78000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00078000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00078000 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_0_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
-				<&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x00078200 0x130>,     /* Tx */
-				      <0x00078400 0x200>,     /* Rx */
-				      <0x00078800 0x1f8>,     /* PCS */
-				      <0x00078600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_0_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: phy@79000 {
@@ -369,8 +357,14 @@
 		gcc: gcc@1800000 {
 			compatible = "qcom,gcc-ipq8074";
 			reg = <0x01800000 0x80000>;
-			clocks = <&xo>, <&sleep_clk>;
-			clock-names = "xo", "sleep_clk";
+			clocks = <&xo>,
+				 <&sleep_clk>,
+				 <&pcie_qmp0>,
+				 <&pcie_qmp1>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "pcie0_pipe",
+				      "pcie1_pipe";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
@@ -406,7 +400,7 @@
 		};
 
 		sdhc_1: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x500>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 
@@ -523,6 +517,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c5: i2c@78b9000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -628,7 +636,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -670,7 +678,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phys = <&qusb_phy_1>, <&ssphy_1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -708,8 +716,8 @@
 			compatible = "qcom,ipq8074-apcs-apps-global",
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;
@@ -781,7 +789,7 @@
 			};
 		};
 
-		pcie1: pci@10000000 {
+		pcie1: pcie@10000000 {
 			compatible = "qcom,pcie-ipq8074";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
@@ -806,13 +814,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142
+			interrupt-map = <0 0 0 1 &intc 0 0 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143
+					<0 0 0 2 &intc 0 0 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144
+					<0 0 0 3 &intc 0 0 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145
+					<0 0 0 4 &intc 0 0 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -842,7 +850,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq8074-gen3";
 			reg = <0x20000000 0xf1d>,
 			      <0x20000f20 0xa8>,
@@ -868,13 +876,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
+			interrupt-map = <0 0 0 1 &intc 0 0 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
+					<0 0 0 2 &intc 0 0 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
+					<0 0 0 3 &intc 0 0 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
+					<0 0 0 4 &intc 0 0 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,

diff --git a/src/arm64/qcom/ipq9574-rdp-common.dtsi b/src/arm64/qcom/ipq9574-rdp-common.dtsi
new file mode 100644
index 0000000..91e104b
--- /dev/null
+++ b/src/arm64/qcom/ipq9574-rdp-common.dtsi

@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP board common device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq9574.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-supply = <&regulator_fixed_0p925>;
+
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	vdd-supply = <&regulator_fixed_0p925>;
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};

diff --git a/src/arm64/qcom/ipq9574-rdp418.dts b/src/arm64/qcom/ipq9574-rdp418.dts
index 2b093e0..f4f9199 100644
--- a/src/arm64/qcom/ipq9574-rdp418.dts
+++ b/src/arm64/qcom/ipq9574-rdp418.dts

@@ -8,58 +8,12 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
 	compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -74,10 +28,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -110,15 +60,4 @@
 			bias-pull-down;
 		};
 	};
-
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
 };
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
-};

diff --git a/src/arm64/qcom/ipq9574-rdp433.dts b/src/arm64/qcom/ipq9574-rdp433.dts
index 877026c..1bb8d96 100644
--- a/src/arm64/qcom/ipq9574-rdp433.dts
+++ b/src/arm64/qcom/ipq9574-rdp433.dts

@@ -8,69 +8,11 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
 	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulator_fixed_3p3: s3300 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_3p3";
-	};
-
-	regulator_fixed_0p925: s0925 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <925000>;
-		regulator-max-microvolt = <925000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_0p925";
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-
-		mp5496_l2: l2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -85,10 +27,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -122,30 +60,3 @@
 		};
 	};
 };
-
-&usb_0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-supply = <&regulator_fixed_0p925>;
-
-	status = "okay";
-};
-
-&usb_0_qusbphy {
-	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
-
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
-};

diff --git a/src/arm64/qcom/ipq9574-rdp449.dts b/src/arm64/qcom/ipq9574-rdp449.dts
index c8fa54e..d36d107 100644
--- a/src/arm64/qcom/ipq9574-rdp449.dts
+++ b/src/arm64/qcom/ipq9574-rdp449.dts

@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
 	compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };

diff --git a/src/arm64/qcom/ipq9574-rdp453.dts b/src/arm64/qcom/ipq9574-rdp453.dts
index f01de66..c30c9fb 100644
--- a/src/arm64/qcom/ipq9574-rdp453.dts
+++ b/src/arm64/qcom/ipq9574-rdp453.dts

@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
 	compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };

diff --git a/src/arm64/qcom/ipq9574-rdp454.dts b/src/arm64/qcom/ipq9574-rdp454.dts
index 6efae34..0dc382f 100644
--- a/src/arm64/qcom/ipq9574-rdp454.dts
+++ b/src/arm64/qcom/ipq9574-rdp454.dts

@@ -8,73 +8,9 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
 	compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };

diff --git a/src/arm64/qcom/ipq9574.dtsi b/src/arm64/qcom/ipq9574.dtsi
index 8a72ad4..5f83ee4 100644
--- a/src/arm64/qcom/ipq9574.dtsi
+++ b/src/arm64/qcom/ipq9574.dtsi

@@ -106,42 +106,56 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
 		opp-936000000 {
 			opp-hz = /bits/ 64 <936000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1104000000 {
 			opp-hz = /bits/ 64 <1104000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <862500>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+		};
+
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1488000000 {
 			opp-hz = /bits/ 64 <1488000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-2208000000 {
 			opp-hz = /bits/ 64 <2208000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -223,6 +237,11 @@
 			reg = <0x000a4000 0x5a1>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@15 {
+				reg = <0x15 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		cryptobam: dma-controller@704000 {
@@ -652,8 +671,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a73pll>, <&xo_board_clk>;
-			clock-names = "pll", "xo";
+			clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 

diff --git a/src/arm64/qcom/msm8916-acer-a1-724.dts b/src/arm64/qcom/msm8916-acer-a1-724.dts
index 57a74ee..b32c7a9 100644
--- a/src/arm64/qcom/msm8916-acer-a1-724.dts
+++ b/src/arm64/qcom/msm8916-acer-a1-724.dts

@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * NOTE: The original firmware from Acer can only boot 32-bit kernels.
@@ -83,6 +84,29 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 

diff --git a/src/arm64/qcom/msm8916-alcatel-idol347.dts b/src/arm64/qcom/msm8916-alcatel-idol347.dts
index aa4c1ab..3459145 100644
--- a/src/arm64/qcom/msm8916-alcatel-idol347.dts
+++ b/src/arm64/qcom/msm8916-alcatel-idol347.dts

@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -22,6 +24,19 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		/delete-node/ reserved@86680000;
+		/delete-node/ rmtfs@86700000;
+
+		rmtfs: rmtfs@86680000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86680000 0x0 0x160000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,6 +65,17 @@
 		};
 	};
 
+	reg_headphones_avdd: regulator-headphones-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "headphones_avdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&headphones_avdd_default>;
+		pinctrl-names = "default";
+	};
+
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
@@ -58,8 +84,41 @@
 	};
 };
 
-&blsp_uart2 {
+&blsp_i2c3 {
 	status = "okay";
+
+	headphones: audio-codec@10 {
+		compatible = "asahi-kasei,ak4375";
+		reg = <0x10>;
+		avdd-supply = <&reg_headphones_avdd>;
+		tvdd-supply = <&pm8916_l6>;
+		pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&headphones_pdn_default>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_top: audio-codec@34 {
+		compatible = "nxp,tfa9897";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_top_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Top";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_bottom: audio-codec@36 {
+		compatible = "nxp,tfa9897";
+		reg = <0x36>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_bottom_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Bottom";
+		#sound-dai-cells = <0>;
+	};
 };
 
 &blsp_i2c4 {
@@ -153,6 +212,22 @@
 	};
 };
 
+&blsp_uart2 {
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -169,6 +244,17 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@18 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -183,6 +269,54 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/* Add pin switches for speakers to allow disabling them individually */
+	model = "alcatel-idol3";
+	widgets =
+		"Speaker", "Speaker Top",
+		"Speaker", "Speaker Bottom";
+	pin-switches = "Speaker Top", "Speaker Bottom";
+	audio-routing =
+		"Speaker Top", "Speaker Top OUT",
+		"Speaker Bottom", "Speaker Bottom OUT",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>;
+		};
+	};
+};
+
+&sound_link_backend0 {
+	/* Primary MI2S is not used, replace with Secondary MI2S for headphones */
+	link-name = "Secondary MI2S";
+
+	cpu {
+		sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+	};
+	platform {
+		sound-dai = <&q6routing>;
+	};
+	codec {
+		sound-dai = <&headphones>;
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -212,6 +346,15 @@
 	status = "okay";
 };
 
+/* Only some of the pins are used */
+&pri_mi2s_default {
+	pins = "gpio113", "gpio115";
+};
+
+&pri_mi2s_sleep {
+	pins = "gpio113", "gpio115";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio31";
@@ -245,6 +388,20 @@
 		bias-disable;
 	};
 
+	headphones_avdd_default: headphones-avdd-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	headphones_pdn_default: headphones-pdn-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	/*
 	 * The OEM wired an additional GPIO to be asserted so that
 	 * the si-en,sn3190 LED IC works. Since this GPIO is not
@@ -291,6 +448,20 @@
 		bias-disable;
 	};
 
+	speaker_bottom_default: speaker-bottom-default-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	speaker_top_default: speaker-top-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	ts_int_reset_default: ts-int-reset-default-state {
 		pins = "gpio13", "gpio100";
 		function = "gpio";

diff --git a/src/arm64/qcom/msm8916-asus-z00l.dts b/src/arm64/qcom/msm8916-asus-z00l.dts
index a8be6ff..77618c7 100644
--- a/src/arm64/qcom/msm8916-asus-z00l.dts
+++ b/src/arm64/qcom/msm8916-asus-z00l.dts

@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -130,6 +132,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_rpm_regulators {
 	pm8916_l17: l17 {
 		regulator-min-microvolt = <2850000>;
@@ -151,6 +165,13 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;

diff --git a/src/arm64/qcom/msm8916-longcheer-l8150.dts b/src/arm64/qcom/msm8916-longcheer-l8150.dts
index 47d1c5c..3a3e794 100644
--- a/src/arm64/qcom/msm8916-longcheer-l8150.dts
+++ b/src/arm64/qcom/msm8916-longcheer-l8150.dts

@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -25,19 +27,47 @@
 
 	/*
 	 * For some reason, the signed wcnss firmware is not relocatable.
-	 * It must be loaded at 0x8b600000. All other firmware is relocatable,
-	 * so place wcnss at the fixed address and then all other firmware
-	 * regions will be automatically allocated at a fitting place.
+	 * It must be loaded at 0x8b600000. Unfortunately, this also means that
+	 * mpss_mem does not fit when loaded to the typical address at 0x86800000.
+	 *
+	 * Load wcnss_mem to the fixed address and relocate mpss_mem to the next
+	 * working higher address. For some reason the modem firmware does not
+	 * boot when placed at 0x8a800000 to 0x8e800000.
 	 */
 	reserved-memory {
+		/delete-node/ mpss@86800000;
 		/delete-node/ wcnss;
 
 		wcnss_mem: wcnss@8b600000 {
 			reg = <0x0 0x8b600000 0x0 0x600000>;
 			no-map;
 		};
+
+		mpss_mem: mpss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x5000000>;
+			no-map;
+		};
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <9500000>;
+		charge-full-design-microamp-hours = <2500000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
+			<4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
+			<4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
+			<3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
+			<3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
+			<3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
+			<3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
+			<3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
+			<3000000 0>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -93,6 +123,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
 
 		led@0 {
 			reg = <0>;
@@ -223,6 +254,29 @@
 
 &blsp_uart2 {
 	status = "okay";
+};
+
+&pm8916_bms {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+	power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+
+	qcom,fast-charge-safe-current = <900000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
 };
 
 &pm8916_resin {
@@ -237,10 +291,6 @@
 	};
 };
 
-&pm8916_usbin {
-	status = "okay";
-};
-
 &pm8916_vib {
 	status = "okay";
 };
@@ -254,14 +304,21 @@
 	non-removable;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS Internal1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS Internal3";
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "peripheral";
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &usb_hs_phy {
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &venus {

diff --git a/src/arm64/qcom/msm8916-longcheer-l8910.dts b/src/arm64/qcom/msm8916-longcheer-l8910.dts
index 41cadb9..3b7fdb6 100644
--- a/src/arm64/qcom/msm8916-longcheer-l8910.dts
+++ b/src/arm64/qcom/msm8916-longcheer-l8910.dts

@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "BQ Aquaris X5 (Longcheer L8910)";
@@ -22,6 +25,16 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+
+		pinctrl-0 = <&spk_ext_pa_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
@@ -74,6 +87,46 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -107,6 +160,27 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -137,6 +211,28 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker separately.
+	 * The hardware does not provide a way to disable the output via the
+	 * headphone jack when the speaker is enabled.
+	 */
+	model = "bq-paella";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker";
+	audio-routing =
+		"Speaker", "Speaker Amp OUT",
+		"Speaker Amp IN", "HPH_R",
+		"Headphones", "HPH_L",
+		"Headphones", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+	aux-devs = <&speaker_amp>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -205,6 +301,13 @@
 		bias-disable;
 	};
 
+	spk_ext_pa_default: spk-ext-pa-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";

diff --git a/src/arm64/qcom/msm8916-modem-qdsp6.dtsi b/src/arm64/qcom/msm8916-modem-qdsp6.dtsi
new file mode 100644
index 0000000..0399616
--- /dev/null
+++ b/src/arm64/qcom/msm8916-modem-qdsp6.dtsi

@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices
+ * (or similar SoCs) with audio routed via the QDSP6 services provided by the
+ * modem firmware. The digital/analog codec in the SoC/PMIC is used by default,
+ * but boards can define additional codecs by adding additional backend DAI links.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+&apr {
+	status = "okay";
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&lpass {
+	status = "reserved"; /* Controlled by QDSP6 */
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mba_mem {
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+};
+
+&mpss_mem {
+	status = "okay";
+};
+
+&pm8916_codec {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <0 1>;
+	};
+	dai@20 {
+		reg = <TERTIARY_MI2S_TX>;
+		qcom,sd-lines = <0 1>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@1 {
+		reg = <1>;
+		direction = <Q6ASM_DAI_TX>;
+	};
+	dai@2 {
+		reg = <2>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@3 {
+		reg = <3>;
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+	};
+};
+
+&sound {
+	compatible = "qcom,msm8916-qdsp6-sndcard";
+	model = "msm8916";
+
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	frontend0-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	frontend1-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	frontend2-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	frontend3-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	sound_link_backend0: backend0-dai-link {
+		link-name = "Primary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	sound_link_backend1: backend1-dai-link {
+		link-name = "Tertiary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai TERTIARY_MI2S_TX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};

diff --git a/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
index 0b29132..2937495 100644
--- a/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi

@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -196,6 +199,18 @@
 	};
 };
 
+&blsp_i2c1 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c2 {
 	status = "okay";
 
@@ -243,6 +258,25 @@
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -253,6 +287,10 @@
 	pinctrl-1 = <&mdss_sleep>;
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -265,6 +303,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -279,6 +324,32 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;

diff --git a/src/arm64/qcom/msm8916-samsung-a3u-eur.dts b/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
index f5a8083..3b934f5 100644
--- a/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
+++ b/src/arm64/qcom/msm8916-samsung-a3u-eur.dts

@@ -49,11 +49,6 @@
 	};
 };
 
-&touchkey {
-	vcc-supply = <&reg_touch_key>;
-	vdd-supply = <&reg_key_led>;
-};
-
 &accelerometer {
 	mount-matrix = "0", "1", "0",
 		       "1", "0", "0",
@@ -108,6 +103,11 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_key_led>;
+};
+
 &vibrator {
 	status = "okay";
 };

diff --git a/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi b/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
index 0824ab0..3c49dac 100644
--- a/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-e2015-common.dtsi

@@ -65,6 +65,10 @@
 	};
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &reg_motor_vdd {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;

diff --git a/src/arm64/qcom/msm8916-samsung-grandmax.dts b/src/arm64/qcom/msm8916-samsung-grandmax.dts
index 3f145dd..5882b3a 100644
--- a/src/arm64/qcom/msm8916-samsung-grandmax.dts
+++ b/src/arm64/qcom/msm8916-samsung-grandmax.dts

@@ -49,6 +49,10 @@
 	status = "disabled";
 };
 
+&sound {
+	model = "samsung-gmax"; /* No secondary microphone */
+};
+
 &tlmm {
 	gpio_leds_default: gpio-led-default-state {
 		pins = "gpio60";

diff --git a/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi b/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi
index c19cf20..fbd2caf 100644
--- a/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi

@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -65,25 +68,6 @@
 	};
 };
 
-&blsp_i2c4 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max77849-battery";
-		reg = <0x36>;
-
-		maxim,rsns-microohm = <10000>;
-		maxim,over-heat-temp = <600>;
-		maxim,over-volt = <4400>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-0 = <&fuelgauge_int_default>;
-		pinctrl-names = "default";
-	};
-};
-
 &blsp_i2c2 {
 	status = "okay";
 
@@ -112,10 +96,52 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77849-battery";
+		reg = <0x36>;
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4400>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -133,6 +159,13 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -147,6 +180,27 @@
 	status = "okay";
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	dr_mode = "peripheral";
 	extcon = <&pm8916_usbin>;

diff --git a/src/arm64/qcom/msm8916-samsung-gt510.dts b/src/arm64/qcom/msm8916-samsung-gt510.dts
index 75c4854..5b34529 100644
--- a/src/arm64/qcom/msm8916-samsung-gt510.dts
+++ b/src/arm64/qcom/msm8916-samsung-gt510.dts

@@ -9,6 +9,14 @@
 	compatible = "samsung,gt510", "qcom,msm8916";
 	chassis-type = "tablet";
 
+	speaker_codec: audio-codec {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		pinctrl-0 = <&audio_sdmode_default>;
+		pinctrl-names = "default";
+	};
+
 	clk_pwm: pwm {
 		compatible = "clk-pwm";
 		#pwm-cells = <2>;
@@ -112,6 +120,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -142,7 +154,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-gt510";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	audio_sdmode_default: audio-sdmode-default-state {
+		pins = "gpio55";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio51";
 		function = "gpio";

diff --git a/src/arm64/qcom/msm8916-samsung-gt58.dts b/src/arm64/qcom/msm8916-samsung-gt58.dts
index 11359bc..579312e 100644
--- a/src/arm64/qcom/msm8916-samsung-gt58.dts
+++ b/src/arm64/qcom/msm8916-samsung-gt58.dts

@@ -35,6 +35,26 @@
 		pinctrl-names = "default";
 	};
 
+	i2c-amplifier {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&amp_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		speaker_codec: audio-codec@34 {
+			compatible = "nxp,tfa9895";
+			reg = <0x34>;
+			vddd-supply = <&pm8916_l5>;
+			sound-name-prefix = "Speaker";
+			#sound-dai-cells = <0>;
+		};
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
@@ -64,6 +84,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -94,7 +118,21 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	amp_i2c_default: amp-i2c-default-state {
+		pins = "gpio55", "gpio56";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	buckbooster_en_default: buckbooster-en-default-state {
 		pins = "gpio8";
 		function = "gpio";
@@ -123,6 +161,14 @@
 		bias-disable;
 	};
 
+	secondary_mic_default: secondary-mic-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
 	tsp_int_default: tsp-int-default-state {
 		pins = "gpio13";
 		function = "gpio";

diff --git a/src/arm64/qcom/msm8916-samsung-j5-common.dtsi b/src/arm64/qcom/msm8916-samsung-j5-common.dtsi
index fe59be3..5ca2ada 100644
--- a/src/arm64/qcom/msm8916-samsung-j5-common.dtsi
+++ b/src/arm64/qcom/msm8916-samsung-j5-common.dtsi

@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -135,6 +137,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -154,6 +160,14 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";

diff --git a/src/arm64/qcom/msm8916-samsung-j5.dts b/src/arm64/qcom/msm8916-samsung-j5.dts
index 58c2f5a..ba86509 100644
--- a/src/arm64/qcom/msm8916-samsung-j5.dts
+++ b/src/arm64/qcom/msm8916-samsung-j5.dts

@@ -19,6 +19,10 @@
 	status = "disabled";
 };
 
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+};
+
 &touchscreen {
 	/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
 };

diff --git a/src/arm64/qcom/msm8916-samsung-serranove.dts b/src/arm64/qcom/msm8916-samsung-serranove.dts
index 68da2a2..5ce8f13 100644
--- a/src/arm64/qcom/msm8916-samsung-serranove.dts
+++ b/src/arm64/qcom/msm8916-samsung-serranove.dts

@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -319,6 +321,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -350,6 +356,13 @@
 	no-1-8-v;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;

diff --git a/src/arm64/qcom/msm8916-thwc-uf896.dts b/src/arm64/qcom/msm8916-thwc-uf896.dts
index 6fe1850..f349975 100644
--- a/src/arm64/qcom/msm8916-thwc-uf896.dts
+++ b/src/arm64/qcom/msm8916-thwc-uf896.dts

@@ -13,16 +13,16 @@
 	gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {

diff --git a/src/arm64/qcom/msm8916-thwc-ufi001c.dts b/src/arm64/qcom/msm8916-thwc-ufi001c.dts
index 16d4a91..6cb3911 100644
--- a/src/arm64/qcom/msm8916-thwc-ufi001c.dts
+++ b/src/arm64/qcom/msm8916-thwc-ufi001c.dts

@@ -13,16 +13,16 @@
 	gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 };
 
-&led_r {
-	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 };
 
 &mpss {

diff --git a/src/arm64/qcom/msm8916-wingtech-wt88047.dts b/src/arm64/qcom/msm8916-wingtech-wt88047.dts
index 419f35c..510b3b3 100644
--- a/src/arm64/qcom/msm8916-wingtech-wt88047.dts
+++ b/src/arm64/qcom/msm8916-wingtech-wt88047.dts

@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -25,6 +27,28 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp";
+		pinctrl-0 = <&speaker_amp_default>;
+		pinctrl-names = "default";
+	};
+
+	/*
+	 * This seems to be actually an analog switch that either routes audio
+	 * to the headphone jack or nowhere. Given that we need to enable a GPIO
+	 * to get sound on headphones, modelling it as simple-audio-amplifier
+	 * works just fine.
+	 */
+	headphones_switch: audio-switch {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Switch";
+		pinctrl-0 = <&headphones_switch_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
@@ -118,6 +142,7 @@
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
 
 		led@0 {
 			reg = <0>;
@@ -146,6 +171,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5100000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -180,6 +217,30 @@
 	non-removable;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker and headphones
+	 * separately. Both are routed via the HPH_L/HPH_R pins of the codec.
+	 */
+	model = "wt88047";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker", "Headphones";
+	audio-routing =
+		"Speaker", "Speaker Amp OUTL",
+		"Speaker", "Speaker Amp OUTR",
+		"Speaker Amp INL", "HPH_R",
+		"Speaker Amp INR", "HPH_R",
+		"Headphones", "Headphones Switch OUTL",
+		"Headphones", "Headphones Switch OUTR",
+		"Headphones Switch INL", "HPH_L",
+		"Headphones Switch INR", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2";
+	aux-devs = <&speaker_amp>, <&headphones_switch>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -226,6 +287,13 @@
 		bias-pull-up;
 	};
 
+	headphones_switch_default: headphones-switch-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	imu_default: imu-default-state {
 		pins = "gpio115";
 		function = "gpio";
@@ -234,6 +302,13 @@
 		bias-disable;
 	};
 
+	speaker_amp_default: speaker-amp-default-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	touchscreen_default: touchscreen-default-state {
 		touchscreen-pins {
 			pins = "gpio13";

diff --git a/src/arm64/qcom/msm8916-yiming-uz801v3.dts b/src/arm64/qcom/msm8916-yiming-uz801v3.dts
index 5e6ba8c..a98efcf 100644
--- a/src/arm64/qcom/msm8916-yiming-uz801v3.dts
+++ b/src/arm64/qcom/msm8916-yiming-uz801v3.dts

@@ -13,16 +13,16 @@
 	gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {

diff --git a/src/arm64/qcom/msm8916.dtsi b/src/arm64/qcom/msm8916.dtsi
index 4f799b5..e423c57 100644
--- a/src/arm64/qcom/msm8916.dtsi
+++ b/src/arm64/qcom/msm8916.dtsi

@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -539,9 +540,6 @@
 			compatible = "qcom,msm8916-bimc";
 			reg = <0x00400000 0x62000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -574,18 +572,12 @@
 			compatible = "qcom,msm8916-pcnoc";
 			reg = <0x00500000 0x11000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8916-snoc";
 			reg = <0x00580000 0x14000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		stm: stm@802000 {
@@ -1989,6 +1981,54 @@
 
 				label = "hexagon";
 
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,smd-channels = "fastrpcsmd-apps-dsp";
@@ -2106,6 +2146,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {

diff --git a/src/arm64/qcom/msm8939-huawei-kiwi.dts b/src/arm64/qcom/msm8939-huawei-kiwi.dts
new file mode 100644
index 0000000..3cec518
--- /dev/null
+++ b/src/arm64/qcom/msm8939-huawei-kiwi.dts

@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Huawei Honor 5X / GR5 (2016)";
+	compatible = "huawei,kiwi", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1600000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <25000>;
+		amstaos,proximity-diodes = <0>;
+
+		pinctrl-0 = <&prox_irq_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@1c {
+		compatible = "cypress,tt21000";
+
+		reg = <0x1c>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
+		 * fixed regulator that is automatically enabled by pm8916_l16.
+		 */
+		vdd-supply = <&pm8916_l16>;
+		vddio-supply = <&pm8916_l16>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_l8 {
+	regulator-min-microvolt = <2950000>;
+	regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	prox_irq_default: prox-irq-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};

diff --git a/src/arm64/qcom/msm8939-longcheer-l9100.dts b/src/arm64/qcom/msm8939-longcheer-l9100.dts
index 6802714..e3404c4 100644
--- a/src/arm64/qcom/msm8939-longcheer-l9100.dts
+++ b/src/arm64/qcom/msm8939-longcheer-l9100.dts

@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
 / {
@@ -120,6 +121,46 @@
 
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -139,6 +180,7 @@
 	light-sensor@23 {
 		compatible = "liteon,ltr559";
 		reg = <0x23>;
+		proximity-near-level = <75>;
 
 		vdd-supply = <&pm8916_l17>;
 		vddio-supply = <&pm8916_l5>;
@@ -184,6 +226,16 @@
 	status = "okay";
 };
 
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_mpps {
 	pwm_out: mpp4-state {
 		pins = "mpp4";
@@ -247,6 +299,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	button_backlight_default: button-backlight-default-state {
 		pins = "gpio17";

diff --git a/src/arm64/qcom/msm8939-samsung-a7.dts b/src/arm64/qcom/msm8939-samsung-a7.dts
index fccd8fe..aa6c394 100644
--- a/src/arm64/qcom/msm8939-samsung-a7.dts
+++ b/src/arm64/qcom/msm8939-samsung-a7.dts

@@ -3,10 +3,12 @@
 /dts-v1/;
 
 #include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	model = "Samsung Galaxy A7 (2015)";
@@ -287,6 +289,18 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -309,6 +323,29 @@
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -321,6 +358,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -335,6 +379,32 @@
 	status = "okay";
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";

diff --git a/src/arm64/qcom/msm8939.dtsi b/src/arm64/qcom/msm8939.dtsi
index 324b5d2..82d85ff 100644
--- a/src/arm64/qcom/msm8939.dtsi
+++ b/src/arm64/qcom/msm8939.dtsi

@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -601,9 +602,6 @@
 		bimc: interconnect@400000 {
 			compatible = "qcom,msm8939-bimc";
 			reg = <0x00400000 0x62000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
@@ -647,25 +645,16 @@
 		pcnoc: interconnect@500000 {
 			compatible = "qcom,msm8939-pcnoc";
 			reg = <0x00500000 0x11000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8939-snoc";
 			reg = <0x00580000 0x14080>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 			#interconnect-cells = <1>;
 
 			snoc_mm: interconnect-snoc {
 				compatible = "qcom,msm8939-snoc-mm";
-				clock-names = "bus", "bus_a";
-				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
-					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
 				#interconnect-cells = <1>;
 			};
 		};
@@ -1537,6 +1526,20 @@
 			#interrupt-cells = <4>;
 		};
 
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>, <0x04020000 0x040>;
@@ -1569,6 +1572,22 @@
 			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
 			status = "disabled";
 
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&hexagon_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
 			mba {
 				memory-region = <&mba_mem>;
 			};
@@ -1585,6 +1604,54 @@
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
+
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1682,6 +1749,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp_uart1: serial@78af000 {
@@ -2116,6 +2184,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			/* Necessary because firmware does not configure this correctly */
+			clock-frequency = <19200000>;
 
 			frame@b121000 {
 				reg = <0x0b121000 0x1000>,

diff --git a/src/arm64/qcom/msm8953-xiaomi-mido.dts b/src/arm64/qcom/msm8953-xiaomi-mido.dts
index ed95d09..6b9245c 100644
--- a/src/arm64/qcom/msm8953-xiaomi-mido.dts
+++ b/src/arm64/qcom/msm8953-xiaomi-mido.dts

@@ -111,6 +111,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;

diff --git a/src/arm64/qcom/msm8953-xiaomi-tissot.dts b/src/arm64/qcom/msm8953-xiaomi-tissot.dts
index 61ff629..9ac4f50 100644
--- a/src/arm64/qcom/msm8953-xiaomi-tissot.dts
+++ b/src/arm64/qcom/msm8953-xiaomi-tissot.dts

@@ -104,6 +104,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;

diff --git a/src/arm64/qcom/msm8953-xiaomi-vince.dts b/src/arm64/qcom/msm8953-xiaomi-vince.dts
index 1a1d3f9..b0588f3 100644
--- a/src/arm64/qcom/msm8953-xiaomi-vince.dts
+++ b/src/arm64/qcom/msm8953-xiaomi-vince.dts

@@ -113,6 +113,7 @@
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;

diff --git a/src/arm64/qcom/msm8953.dtsi b/src/arm64/qcom/msm8953.dtsi
index e7de763..ad2f8cf 100644
--- a/src/arm64/qcom/msm8953.dtsi
+++ b/src/arm64/qcom/msm8953.dtsi

@@ -174,10 +174,10 @@
 		};
 	};
 
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x10000000 0 0>;
 	};
 
 	pmu {
@@ -726,6 +726,48 @@
 				bias-disable;
 			};
 
+			spi_3_default: spi-3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_spi3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_3_sleep: spi-3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_default: spi-5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_spi5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_sleep: spi-5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_default: spi-6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_spi6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_sleep: spi-6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			wcnss_pin_a: wcnss-active-state {
 
 				wcss-wlan2-pins {
@@ -1004,7 +1046,7 @@
 
 		apps_iommu: iommu@1e20000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
-			ranges  = <0 0x01e20000 0x20000>;
+			ranges = <0 0x01e20000 0x20000>;
 
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
@@ -1360,6 +1402,26 @@
 			status = "disabled";
 		};
 
+		spi_3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_3_default>;
+			pinctrl-1 = <&spi_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b8000 0x600>;
@@ -1413,6 +1475,26 @@
 			status = "disabled";
 		};
 
+		spi_5: spi@7af5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_5_default>;
+			pinctrl-1 = <&spi_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_6: i2c@7af6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af6000 0x600>;
@@ -1433,6 +1515,26 @@
 			status = "disabled";
 		};
 
+		spi_6: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_6_default>;
+			pinctrl-1 = <&spi_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_7: i2c@7af7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af7000 0x600>;
@@ -1645,7 +1747,7 @@
 				apr {
 					compatible = "qcom,apr-v2";
 					qcom,smd-channels = "apr_audio_svc";
-					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					qcom,domain = <APR_DOMAIN_ADSP>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 

diff --git a/src/arm64/qcom/msm8996.dtsi b/src/arm64/qcom/msm8996.dtsi
index 6ba9da9..ee6f87c 100644
--- a/src/arm64/qcom/msm8996.dtsi
+++ b/src/arm64/qcom/msm8996.dtsi

@@ -444,6 +444,19 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -779,10 +792,10 @@
 				 <&pciephy_0>,
 				 <&pciephy_1>,
 				 <&pciephy_2>,
-				 <&ssusb_phy_0>,
-				 <&ufsphy_lane 0>,
-				 <&ufsphy_lane 1>,
-				 <&ufsphy_lane 2>;
+				 <&usb3phy>,
+				 <&ufsphy 0>,
+				 <&ufsphy 1>,
+				 <&ufsphy 2>;
 			clock-names = "cxo",
 				      "cxo2",
 				      "sleep_clk",
@@ -799,9 +812,6 @@
 			compatible = "qcom,msm8996-bimc";
 			reg = <0x00408000 0x5a000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens0: thermal-sensor@4a9000 {
@@ -852,18 +862,12 @@
 			compatible = "qcom,msm8996-cnoc";
 			reg = <0x00500000 0x1000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@524000 {
 			compatible = "qcom,msm8996-snoc";
 			reg = <0x00524000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		a0noc: interconnect@543000 {
@@ -883,19 +887,14 @@
 			compatible = "qcom,msm8996-a1noc";
 			reg = <0x00562000 0x5000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
 		};
 
 		a2noc: interconnect@583000 {
 			compatible = "qcom,msm8996-a2noc";
 			reg = <0x00583000 0x7000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+			clock-names = "aggre2_ufs_axi", "ufs_axi";
+			clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>;
 		};
 
@@ -903,19 +902,14 @@
 			compatible = "qcom,msm8996-mnoc";
 			reg = <0x005a4000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
-				 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		pnoc: interconnect@5c0000 {
 			compatible = "qcom,msm8996-pnoc";
 			reg = <0x005c0000 0x3000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		tcsr_mutex: hwlock@740000 {
@@ -2047,7 +2041,7 @@
 			reg = <0x00624000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 
-			phys = <&ufsphy_lane>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 
 			power-domains = <&gcc UFS_GDSC>;
@@ -2100,25 +2094,18 @@
 
 		ufsphy: phy@627000 {
 			compatible = "qcom,msm8996-qmp-ufs-phy";
-			reg = <0x00627000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00627000 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
 			clock-names = "ref";
 
 			resets = <&ufshc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufsphy_lane: phy@627400 {
-				reg = <0x627400 0x12c>,
-				      <0x627600 0x200>,
-				      <0x627c00 0x1b4>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		camss: camss@a34000 {
@@ -2453,9 +2440,8 @@
 					  "handover",
 					  "stop-ack";
 
-			clocks = <&xo_board>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&xo_board>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2500,10 +2486,15 @@
 				 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
 				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
 				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_CLK>,
 				 <&rpmcc RPM_SMD_QDSS_CLK>;
-			clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
-				      "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo",
+				      "gpll0_mss",
+				      "snoc_axi",
+				      "mnoc_axi",
+				      "qdss";
 
 			resets = <&gcc GCC_MSS_RESTART>;
 			reset-names = "mss_restart";
@@ -2644,6 +2635,14 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
@@ -3056,7 +3055,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phys = <&hsusb_phy1>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
@@ -3068,32 +3067,26 @@
 
 		usb3phy: phy@7410000 {
 			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x07410000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x07410000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
-
-			ssusb_phy_0: phy@7410200 {
-				reg = <0x07410200 0x200>,
-				      <0x07410400 0x130>,
-				      <0x07410600 0x1a8>;
-				#phy-cells = <0>;
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-				#clock-cells = <0>;
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
+			status = "disabled";
 		};
 
 		hsusb_phy1: phy@7411000 {

diff --git a/src/arm64/qcom/msm8998.dtsi b/src/arm64/qcom/msm8998.dtsi
index b485bf9..2793cc2 100644
--- a/src/arm64/qcom/msm8998.dtsi
+++ b/src/arm64/qcom/msm8998.dtsi

@@ -933,7 +933,7 @@
 				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
 			reg = <0x01c00000 0x2000>,
 			      <0x1b000000 0xf1d>,
@@ -1004,7 +1004,7 @@
 			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x01da4000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufsphy_lanes>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_GDSC>;
@@ -1045,11 +1045,7 @@
 
 		ufsphy: phy@1da7000 {
 			compatible = "qcom,msm8998-qmp-ufs-phy";
-			reg = <0x01da7000 0x18c>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges;
+			reg = <0x01da7000 0x1000>;
 
 			clock-names =
 				"ref",
@@ -1061,14 +1057,8 @@
 			reset-names = "ufsphy";
 			resets = <&ufshc 0>;
 
-			ufsphy_lanes: phy@1da7400 {
-				reg = <0x01da7400 0x128>,
-				      <0x01da7600 0x1fc>,
-				      <0x01da7c00 0x1dc>,
-				      <0x01da7800 0x128>,
-				      <0x01da7a00 0x1fc>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -1615,9 +1605,8 @@
 
 			px-supply = <&vreg_lvs2a_1p8>;
 
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2031,9 +2020,11 @@
 
 			cpu = <&CPU4>;
 
-			port {
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -2048,9 +2039,11 @@
 
 			cpu = <&CPU5>;
 
-			port {
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -2065,9 +2058,11 @@
 
 			cpu = <&CPU6>;
 
-			port {
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -2082,9 +2077,11 @@
 
 			cpu = <&CPU7>;
 
-			port {
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
@@ -2149,7 +2146,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2158,33 +2155,26 @@
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {

diff --git a/src/arm64/qcom/pm7250b.dtsi b/src/arm64/qcom/pm7250b.dtsi
index df0afe8..3bf7cf5 100644
--- a/src/arm64/qcom/pm7250b.dtsi
+++ b/src/arm64/qcom/pm7250b.dtsi

@@ -148,7 +148,7 @@
 			status = "disabled";
 		};
 
-		pm7250b_gpios: pinctrl@c000 {
+		pm7250b_gpios: gpio@c000 {
 			compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

diff --git a/src/arm64/qcom/pm8550.dtsi b/src/arm64/qcom/pm8550.dtsi
index db3d5c1..797a18c 100644
--- a/src/arm64/qcom/pm8550.dtsi
+++ b/src/arm64/qcom/pm8550.dtsi

@@ -64,9 +64,6 @@
 
 		pm8550_pwm: pwm {
 			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#pwm-cells = <2>;
 
 			status = "disabled";

diff --git a/src/arm64/qcom/pm8550ve.dtsi b/src/arm64/qcom/pm8550ve.dtsi
index c47646a..4dc1f03 100644
--- a/src/arm64/qcom/pm8550ve.dtsi
+++ b/src/arm64/qcom/pm8550ve.dtsi

@@ -33,16 +33,16 @@
 
 
 &spmi_bus {
-	pm8550ve: pmic@5 {
+	pm8550ve: pmic@PMK8550VE_SID {
 		compatible = "qcom,pm8550", "qcom,spmi-pmic";
-		reg = <0x5 SPMI_USID>;
+		reg = <PMK8550VE_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm8550ve_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 

diff --git a/src/arm64/qcom/pm8916.dtsi b/src/arm64/qcom/pm8916.dtsi
index f4de867..4b2e8fb 100644
--- a/src/arm64/qcom/pm8916.dtsi
+++ b/src/arm64/qcom/pm8916.dtsi

@@ -41,6 +41,35 @@
 			};
 		};
 
+		pm8916_charger: charger@1000 {
+			compatible = "qcom,pm8916-lbc";
+			reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
+			reg-names = "chgr", "bat_if", "usb", "misc";
+
+			interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "vbat_det",
+					  "fast_chg",
+					  "chg_fail",
+					  "chg_done",
+					  "bat_pres",
+					  "temp_ok",
+					  "coarse_det",
+					  "usb_vbus",
+					  "chg_gone",
+					  "overtemp";
+
+			status = "disabled";
+		};
+
 		pm8916_usbin: usb-detect@1300 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x1300>;
@@ -91,6 +120,25 @@
 			};
 		};
 
+		pm8916_bms: battery@4000 {
+			compatible = "qcom,pm8916-bms-vm";
+			reg = <0x4000>;
+			interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "cv_leave",
+					  "cv_enter",
+					  "ocv_good",
+					  "ocv_thr",
+					  "fifo",
+					  "state_chg";
+
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;

diff --git a/src/arm64/qcom/pmk8350.dtsi b/src/arm64/qcom/pmk8350.dtsi
index 1eb7401..f0ed154 100644
--- a/src/arm64/qcom/pmk8350.dtsi
+++ b/src/arm64/qcom/pmk8350.dtsi

@@ -22,7 +22,7 @@
 		mode-bootloader = <0x02>;
 	};
 };
-	
+
 &spmi_bus {
 	pmk8350: pmic@PMK8350_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";

diff --git a/src/arm64/qcom/qcm2290.dtsi b/src/arm64/qcom/qcm2290.dtsi
index d46e591..0911fb0 100644
--- a/src/arm64/qcom/qcm2290.dtsi
+++ b/src/arm64/qcom/qcm2290.dtsi

@@ -5,12 +5,15 @@
  * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,qcm2290.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
@@ -150,6 +153,8 @@
 			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 			clock-names = "core";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -194,6 +199,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP>;
 		};
 	};
@@ -261,6 +267,24 @@
 				};
 			};
 		};
+
+		mpm: interrupt-controller {
+			compatible = "qcom,mpm";
+			qcom,rpm-msg-ram = <&apss_mpm>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apcs_glb 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#power-domain-cells = <0>;
+			interrupt-parent = <&intc>;
+			qcom,mpm-pin-count = <96>;
+			qcom,mpm-pin-map = <2 275>,  /* TSENS0 uplow */
+					   <5 296>,  /* Soundwire master_irq */
+					   <12 422>, /* DWC3 ss_phy_irq */
+					   <24 79>,  /* Soundwire wake_irq */
+					   <86 183>, /* MPM wake, SPMI */
+					   <90 260>; /* QUSB2_PHY DP+DM */
+		};
 	};
 
 	reserved_memory: reserved-memory {
@@ -424,6 +448,7 @@
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 127>;
+			wakeup-parent = <&mpm>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -668,6 +693,33 @@
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,qcm2290-snoc";
+			reg = <0x0 0x01880000 0x0 0x60200>;
+			#interconnect-cells = <2>;
+
+			qup_virt: interconnect-qup {
+				compatible = "qcom,qcm2290-qup-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,qcm2290-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,qcm2290-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,qcm2290-cnoc";
+			reg = <0x0 0x01900000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b44000 {
 			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b44000 0x0 0x3000>;
@@ -680,6 +732,60 @@
 			};
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -692,7 +798,7 @@
 				    "obsrvr",
 				    "intr",
 				    "cnfg";
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "periph_irq";
 			qcom,ee = <0>;
 			qcom,channel = <0>;
@@ -707,8 +813,8 @@
 			reg = <0x0 0x04411000 0x0 0x1ff>,
 			      <0x0 0x04410000 0x0 0x8>;
 			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -720,9 +826,22 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,qcm2290-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -755,13 +874,45 @@
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
 			iommus = <&apps_smmu 0xc0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x000f642c>;
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
 
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -785,6 +936,12 @@
 			power-domains = <&rpmpd QCM2290_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0xa0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -798,11 +955,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -850,6 +1011,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -866,6 +1036,12 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -879,6 +1055,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart0_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -893,6 +1075,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -909,6 +1100,12 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -925,6 +1122,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -941,6 +1147,12 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -957,6 +1169,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -973,6 +1194,12 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -989,6 +1216,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1005,6 +1241,12 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1018,6 +1260,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart4_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1032,6 +1280,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1048,6 +1305,12 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1057,9 +1320,10 @@
 		usb: usb@4ef8800 {
 			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
 			reg = <0x0 0x04ef8800 0x0 0x400>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -1080,6 +1344,13 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			/* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
 			wakeup-source;
 
 			#address-cells = <2>;
@@ -1103,6 +1374,225 @@
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
 			};
+		};
+
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,qcm2290-mdss";
+			reg = <0x0 0x05e00000 0x0 0x1000>;
+			reg-names = "mdss";
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+			interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,qcm2290-dpu";
+				reg = <0x0 0x05e01000 0x0 0x8f000>,
+				      <0x0 0x05eb0000 0x0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x05e94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x0 0x05e94400 0x0 0x100>,
+				      <0x0 0x05e94500 0x0 0x300>,
+				      <0x0 0x05e94800 0x0 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				power-domains = <&rpmpd QCM2290_VDDMX>;
+				required-opps = <&rpmpd_opp_nom>;
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,qcm2290-dispcc";
+			reg = <0x0 0x05f00000 0x0 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk";
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		remoteproc_mpss: remoteproc@6080000 {

diff --git a/src/arm64/qcom/qcm6490-fairphone-fp5.dts b/src/arm64/qcom/qcm6490-fairphone-fp5.dts
index 2de0b8c..176898c 100644
--- a/src/arm64/qcom/qcm6490-fairphone-fp5.dts
+++ b/src/arm64/qcom/qcm6490-fairphone-fp5.dts

@@ -9,6 +9,8 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -75,26 +77,11 @@
 			no-map;
 		};
 
-		adsp_mem: adsp@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
 		cdsp_mem: cdsp@88f00000 {
 			reg = <0x0 0x88f00000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		mpss_mem: mpss@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
-		wpss_mem: wpss@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
-
 		rmtfs_mem: memory@f8500000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0xf8500000 0x0 0x600000>;
@@ -134,6 +121,106 @@
 		enable-active-high;
 		vin-supply = <&vreg_bob>;
 	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -182,8 +269,9 @@
 		};
 
 		vreg_l7b: ldo7 {
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3544000>;
+			/* Constrained for UFS VCC, at least until UFS driver scales voltage */
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -423,6 +511,42 @@
 	memory-region = <&ipa_fw_mem>;
 	firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt";
 	status = "okay";
+};
+
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
 };
 
 &pm7325_gpios {
@@ -448,8 +572,91 @@
 	};
 };
 
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &pmk8350_rtc {
 	status = "okay";
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@145 {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_cam_flash_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+
+	channel@147 {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_wide_rfc_therm";
+	};
 };
 
 &pon_pwrkey {
@@ -489,6 +696,26 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/fairphone5/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/fairphone5/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/fairphone5/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcm6490/fairphone5/wpss.mbn";
+	status = "okay";
+};
+
 &sdc2_clk {
 	drive-strength = <16>;
 	bias-disable;
@@ -632,6 +859,28 @@
 	};
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b>;
+	vcc-max-microamp = <800000>;
+	/*
+	 * Technically l9b enables an eLDO (supplied by s1b) which then powers
+	 * VCCQ2 of the UFS.
+	 */
+	vccq-supply = <&vreg_l9b>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -665,3 +914,8 @@
 
 	status = "okay";
 };
+
+&wifi {
+	qcom,ath11k-calibration-variant = "Fairphone_5";
+	status = "okay";
+};

diff --git a/src/arm64/qcom/qcm6490-idp.dts b/src/arm64/qcom/qcm6490-idp.dts
new file mode 100644
index 0000000..03e97e2
--- /dev/null
+++ b/src/arm64/qcom/qcm6490-idp.dts

@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCM6490 IDP";
+	compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <4350000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p952>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};

diff --git a/src/arm64/qcom/qcs404.dtsi b/src/arm64/qcom/qcs404.dtsi
index 2721f32..2f2eeaf 100644
--- a/src/arm64/qcom/qcs404.dtsi
+++ b/src/arm64/qcom/qcs404.dtsi

@@ -558,9 +558,6 @@
 			reg = <0x00400000 0x80000>;
 			compatible = "qcom,qcs404-bimc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				<&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -601,18 +598,12 @@
 			reg = <0x00500000 0x15080>;
 			compatible = "qcom,qcs404-pcnoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-				<&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			reg = <0x00580000 0x23080>;
 			compatible = "qcom,qcs404-snoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				<&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		remoteproc_cdsp: remoteproc@b00000 {
@@ -1461,7 +1452,7 @@
 			};
 		};
 
-		pcie: pci@10000000 {
+		pcie: pcie@10000000 {
 			compatible = "qcom,pcie-qcs404";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,

diff --git a/src/arm64/qcom/qcs6490-rb3gen2.dts b/src/arm64/qcom/qcs6490-rb3gen2.dts
new file mode 100644
index 0000000..8bb7d13
--- /dev/null
+++ b/src/arm64/qcom/qcs6490-rb3gen2.dts

@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
+	compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <4350000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};

diff --git a/src/arm64/qcom/qdu1000.dtsi b/src/arm64/qcom/qdu1000.dtsi
index 1c0e5d2..832f472 100644
--- a/src/arm64/qcom/qdu1000.dtsi
+++ b/src/arm64/qcom/qdu1000.dtsi

@@ -381,6 +381,20 @@
 			#power-domain-cells = <1>;
 		};
 
+		ecpricc: clock-controller@280000 {
+			compatible = "qcom,qdu1000-ecpricc";
+			reg = <0x0 0x00280000 0x0 0x31c00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		gpi_dma0: dma-controller@900000  {
 			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x900000 0x0 0x60000>;
@@ -1446,13 +1460,10 @@
 		system-cache-controller@19200000 {
 			compatible = "qcom,qdu1000-llcc";
 			reg = <0 0x19200000 0 0xd80000>,
-			      <0 0x1a200000 0 0x80000>,
-			      <0 0x221c8128 0 0x4>;
-			reg-names = "llcc_base",
-				    "llcc_broadcast_base",
-				    "multi_channel_register";
+			      <0 0x1a200000 0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			multi-ch-bit-off = <24 2>;
 		};
 	};
 

diff --git a/src/arm64/qcom/qrb2210-rb1.dts b/src/arm64/qcom/qrb2210-rb1.dts
index 94885b9..aa53b6a 100644
--- a/src/arm64/qcom/qrb2210-rb1.dts
+++ b/src/arm64/qcom/qrb2210-rb1.dts

@@ -23,6 +23,14 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	clocks {
+		clk40M: can-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+			#clock-cells = <0>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -40,6 +48,17 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -158,6 +177,68 @@
 	};
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_hdmi_out_1p2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm2250_l5>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
 &pm2250_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -374,9 +455,36 @@
 	no-sdio;
 	no-mmc;
 	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&clk40M>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
 };
 
 &tlmm {
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio41";
+		function = "gpio";
+		input-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio46";
+		function = "gpio";
+		bias-disable;
+	};
+
 	sd_det_in_on: sd-det-in-on-state {
 		pins = "gpio88";
 		function = "gpio";
@@ -415,6 +523,10 @@
 	status = "okay";
 };
 
+&usb_dwc3 {
+	dr_mode = "host";
+};
+
 &usb_hsphy {
 	vdd-supply = <&pm2250_l12>;
 	vdda-pll-supply = <&pm2250_l13>;
@@ -427,6 +539,7 @@
 	vdd-1.8-xo-supply = <&pm2250_l13>;
 	vdd-1.3-rfa-supply = <&pm2250_l10>;
 	vdd-3.3-ch0-supply = <&pm2250_l22>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB1";
 	status = "okay";
 };
 

diff --git a/src/arm64/qcom/qrb4210-rb2.dts b/src/arm64/qcom/qrb4210-rb2.dts
index a7278a9..7c19f87 100644
--- a/src/arm64/qcom/qrb4210-rb2.dts
+++ b/src/arm64/qcom/qrb4210-rb2.dts

@@ -15,6 +15,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &uart3;
 	};
 
 	chosen {
@@ -280,6 +281,12 @@
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/qrb4210/modem.mbn";
+
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -346,13 +353,14 @@
 		};
 
 		vreg_l8a_0p664: l8 {
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <728000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10a_1p8: l10 {
@@ -389,11 +397,13 @@
 		vreg_l16a_1p3: l16 {
 			regulator-min-microvolt = <1704000>;
 			regulator-max-microvolt = <1904000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1152000>;
 			regulator-max-microvolt = <1384000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l18a_1p232: l18 {
@@ -424,8 +434,9 @@
 		};
 
 		vreg_l23a_3p3: l23 {
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l24a_2p96: l24 {
@@ -487,6 +498,66 @@
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
 
+	uart3_default: uart3-default-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart3_sleep: uart3-sleep-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	lt9611_rst_pin: lt9611-rst-state {
 		pins = "gpio41";
 		function = "gpio";
@@ -508,6 +579,26 @@
 	};
 };
 
+&uart3 {
+	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-0 = <&uart3_default>;
+	pinctrl-1 = <&uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3988-bt";
+
+		vddio-supply = <&vreg_l9a_1p8>;
+		vddxo-supply = <&vreg_l16a_1p3>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l23a_3p3>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		max-speed = <3200000>;
+	};
+};
+
 &uart4 {
 	status = "okay";
 };
@@ -518,7 +609,6 @@
 
 &usb_dwc3 {
 	maximum-speed = "super-speed";
-	dr_mode = "peripheral";
 };
 
 &usb_hsphy {
@@ -536,6 +626,16 @@
 	status = "okay";
 };
 
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
+	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };

diff --git a/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts b/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts
index bb149e5..edc0e42 100644
--- a/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts
+++ b/src/arm64/qcom/qrb5165-rb5-vision-mezzanine.dts

@@ -46,7 +46,7 @@
 		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
 		assigned-clock-rates = <24000000>;
 
-		dovdd-supply  = <&vreg_l7f_1p8>;
+		dovdd-supply = <&vreg_l7f_1p8>;
 		avdd-supply = <&vdc_5v>;
 		dvdd-supply = <&vdc_5v>;
 

diff --git a/src/arm64/qcom/qrb5165-rb5.dts b/src/arm64/qcom/qrb5165-rb5.dts
index c8cd40a..cd0db4f 100644
--- a/src/arm64/qcom/qrb5165-rb5.dts
+++ b/src/arm64/qcom/qrb5165-rb5.dts

@@ -23,6 +23,7 @@
 
 	aliases {
 		serial0 = &uart12;
+		serial1 = &uart6;
 		sdhc2 = &sdhc_2;
 	};
 
@@ -64,8 +65,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-wlan {
@@ -1263,6 +1264,14 @@
 		"HST_WLAN_UART_TX",
 		"HST_WLAN_UART_RX";
 
+	bt_en_state: bt-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
 	lt9611_irq_pin: lt9611-irq-state {
 		pins = "gpio63";
 		function = "gpio";
@@ -1296,6 +1305,26 @@
 	};
 };
 
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>;
+
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddpmu-supply = <&vreg_s2f_0p95>;
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddrfa0p9-supply = <&vreg_s2f_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p3>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+	};
+};
+
 &uart12 {
 	status = "okay";
 };
@@ -1425,7 +1454,7 @@
 
 		altmodes {
 			displayport {
-				svid = <0xff01>;
+				svid = /bits/ 16 <0xff01>;
 				vdo = <0x00001c46>;
 			};
 		};

diff --git a/src/arm64/qcom/sa8775p-ride.dts b/src/arm64/qcom/sa8775p-ride.dts
index 9760bb4..26ad05b 100644
--- a/src/arm64/qcom/sa8775p-ride.dts
+++ b/src/arm64/qcom/sa8775p-ride.dts

@@ -461,6 +461,11 @@
 			  "ANALOG_PON_OPT";
 };
 
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
 &pmm8654au_1_gpios {
 	gpio-line-names = "PMIC_C_ID0",
 			  "PMIC_C_ID1",

diff --git a/src/arm64/qcom/sa8775p.dtsi b/src/arm64/qcom/sa8775p.dtsi
index b6a93b1..a7eaca3 100644
--- a/src/arm64/qcom/sa8775p.dtsi
+++ b/src/arm64/qcom/sa8775p.dtsi

@@ -1487,6 +1487,11 @@
 			};
 		};
 
+		rng: rng@10d2000 {
+			compatible = "qcom,sa8775p-trng", "qcom,trng";
+			reg = <0 0x010d2000 0 0x1000>;
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
@@ -1610,8 +1615,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1697,8 +1702,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 7 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1760,8 +1765,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -1910,6 +1915,50 @@
 			interrupt-controller;
 		};
 
+		tsens2: thermal-sensor@c251000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c251000 0x0 0x1ff>,
+			      <0x0 0x0c224000 0x0 0x8>;
+			interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c252000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c252000 0x0 0x1ff>,
+			      <0x0 0x0c225000 0x0 0x8>;
+			interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1ff>,
+			      <0x0 0x0c222000 0x0 0x8>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c265000 0x0 0x1ff>,
+			      <0x0 0x0c223000 0x0 0x8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
@@ -1920,6 +1969,11 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x1100>,
@@ -2181,7 +2235,7 @@
 			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
 			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		memtimer: timer@17c20000 {
@@ -2401,6 +2455,1058 @@
 		};
 	};
 
+	thermal-zones {
+		aoss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	arch_timer: timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
@@ -2409,7 +3515,7 @@
 			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	pcie0: pci@1c00000{
+	pcie0: pcie@1c00000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c00000 0x0 0x3000>,
 		      <0x0 0x40000000 0x0 0xf20>,
@@ -2509,7 +3615,7 @@
 		status = "disabled";
 	};
 
-	pcie1: pci@1c10000{
+	pcie1: pcie@1c10000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c10000 0x0 0x3000>,
 		      <0x0 0x60000000 0x0 0xf20>,

diff --git a/src/arm64/qcom/sc7180-acer-aspire1.dts b/src/arm64/qcom/sc7180-acer-aspire1.dts
index dbb4893..5afcb82 100644
--- a/src/arm64/qcom/sc7180-acer-aspire1.dts
+++ b/src/arm64/qcom/sc7180-acer-aspire1.dts

@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sc7180.dtsi"
@@ -129,6 +130,113 @@
 		pinctrl-names = "default";
 	};
 
+	sound: sound {
+		compatible = "qcom,sc7180-qdsp6-sndcard";
+		pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>;
+		pinctrl-names = "default";
+		model = "Acer-Aspire-1";
+
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		multimedia1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		multimedia2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		multimedia3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+
+		multimedia4-dai-link {
+			link-name = "MultiMedia4";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+			};
+		};
+
+		primary-rx-dai-link {
+			link-name = "Primary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		primary-tx-dai-link {
+			link-name = "Primary MI2S Capture";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		tertiary-rx-dai-link {
+			link-name = "Tertiary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+		};
+
+		displayport-rx-dai-link {
+			link-name = "DisplayPort Playback";
+
+			cpu {
+				sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+	};
+
 	reg_tp_3p3: touchpad-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "tp_3p3";
@@ -209,9 +317,22 @@
 		AVDD-supply = <&vreg_l15a_1p8>;
 		MICVDD-supply = <&reg_codec_3p3>;
 		VBAT-supply = <&reg_codec_3p3>;
+		DBVDD-supply = <&vreg_l15a_1p8>;
+		LDO1-IN-supply = <&vreg_l15a_1p8>;
 
-		realtek,dmic1-data-pin = <1>;
-		realtek,dmic1-clk-pin = <1>;
+		/*
+		 * NOTE: The board has a path from this codec to the
+		 * DMIC microphones in the lid, however some of the option
+		 * resistors are absent and the microphones are connected
+		 * to the SoC instead.
+		 *
+		 * If the resistors were to be changed by the user to
+		 * connect the codec, the following could be used:
+		 *
+		 * realtek,dmic1-data-pin = <1>;
+		 * realtek,dmic1-clk-pin = <1>;
+		 */
+
 		realtek,jd-src = <1>;
 	};
 };
@@ -351,6 +472,49 @@
 	status = "disabled";
 };
 
+&pm6150_rtc {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@17 {
+		reg = <PRIMARY_MI2S_TX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@20 {
+		reg = <TERTIARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@104 {
+		reg = <DISPLAY_PORT_RX>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -359,6 +523,12 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc7180/acer/aspire1/qcadsp7180.mbn";
+	status = "okay";
+};
+
 &remoteproc_mpss {
 	firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
 	status = "okay";

diff --git a/src/arm64/qcom/sc7180-trogdor-pompom.dtsi b/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
index 0be6233..067813f 100644
--- a/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
+++ b/src/arm64/qcom/sc7180-trogdor-pompom.dtsi

@@ -141,7 +141,7 @@
 };
 
 &panel {
-	compatible = "kingdisplay,kd116n21-30nv-a010";
+	compatible = "edp-panel";
 };
 
 &pen_insert {

diff --git a/src/arm64/qcom/sc7180.dtsi b/src/arm64/qcom/sc7180.dtsi
index 11f353d..4dcaa15 100644
--- a/src/arm64/qcom/sc7180.dtsi
+++ b/src/arm64/qcom/sc7180.dtsi

@@ -2966,8 +2966,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3100,8 +3100,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x800 0x2>;
 
@@ -3576,7 +3580,7 @@
 			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {

diff --git a/src/arm64/qcom/sc7280-chrome-common.dtsi b/src/arm64/qcom/sc7280-chrome-common.dtsi
index 5d462ae..c4d00a8 100644
--- a/src/arm64/qcom/sc7280-chrome-common.dtsi
+++ b/src/arm64/qcom/sc7280-chrome-common.dtsi

@@ -17,6 +17,9 @@
  * required by the setup for Chrome boards.
  */
 
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_zap_mem;
+/delete-node/ &gpu_zap_shader;
 /delete-node/ &hyp_mem;
 /delete-node/ &xbl_mem;
 /delete-node/ &reserved_xbl_uefi_log;
@@ -24,11 +27,6 @@
 
 / {
 	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
 		camera_mem: memory@8ad00000 {
 			reg = <0x0 0x8ad00000 0x0 0x500000>;
 			no-map;
@@ -38,11 +36,6 @@
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
-
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
 	};
 };
 
@@ -94,9 +87,31 @@
 	};
 };
 
+/* Currently not used */
+&remoteproc_cdsp {
+	/delete-property/ memory-region;
+};
+
 &remoteproc_wpss {
-	status = "okay";
+	compatible = "qcom,sc7280-wpss-pil";
+	clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+		 <&gcc GCC_WPSS_AHB_CLK>,
+		 <&gcc GCC_WPSS_RSCP_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "ahb_bdg",
+		      "ahb",
+		      "rscp",
+		      "xo";
+
+	resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+		 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+	reset-names = "restart", "pdc_sync";
+
+	qcom,halt-regs = <&tcsr_1 0x17000>;
+
 	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+
+	status = "okay";
 };
 
 &scm {

diff --git a/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi b/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi
index 9550554..b721a85 100644
--- a/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/src/arm64/qcom/sc7280-herobrine-lte-sku.dtsi

@@ -8,11 +8,6 @@
 
 / {
 	reserved-memory {
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
 		mba_mem: memory@9c700000 {
 			reg = <0x0 0x9c700000 0x0 0x200000>;
 			no-map;
@@ -33,6 +28,8 @@
 
 &remoteproc_mpss {
 	compatible = "qcom,sc7280-mss-pil";
+	reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
 
 	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
 		 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,

diff --git a/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi b/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi
index 2febd61..3ebc915 100644
--- a/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi
+++ b/src/arm64/qcom/sc7280-herobrine-wifi-sku.dtsi

@@ -7,5 +7,6 @@
 
 /* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
 
+/delete-node/ &mpss_mem;
 /delete-node/ &remoteproc_mpss;
 /delete-node/ &rmtfs_mem;

diff --git a/src/arm64/qcom/sc7280-idp.dtsi b/src/arm64/qcom/sc7280-idp.dtsi
index 2ff549f..a005952 100644
--- a/src/arm64/qcom/sc7280-idp.dtsi
+++ b/src/arm64/qcom/sc7280-idp.dtsi

@@ -499,6 +499,25 @@
 	status = "okay";
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };

diff --git a/src/arm64/qcom/sc7280.dtsi b/src/arm64/qcom/sc7280.dtsi
index 66f1eb8..83b5b76 100644
--- a/src/arm64/qcom/sc7280.dtsi
+++ b/src/arm64/qcom/sc7280.dtsi

@@ -15,6 +15,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -91,68 +92,93 @@
 		#size-cells = <2>;
 		ranges;
 
-		wlan_ce_mem: memory@4cd000 {
+		wlan_ce_mem: wlan-ce@4cd000 {
 			no-map;
 			reg = <0x0 0x004cd000 0x0 0x1000>;
 		};
 
-		hyp_mem: memory@80000000 {
+		hyp_mem: hyp@80000000 {
 			reg = <0x0 0x80000000 0x0 0x600000>;
 			no-map;
 		};
 
-		xbl_mem: memory@80600000 {
+		xbl_mem: xbl@80600000 {
 			reg = <0x0 0x80600000 0x0 0x200000>;
 			no-map;
 		};
 
-		aop_mem: memory@80800000 {
+		aop_mem: aop@80800000 {
 			reg = <0x0 0x80800000 0x0 0x60000>;
 			no-map;
 		};
 
-		aop_cmd_db_mem: memory@80860000 {
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
 			reg = <0x0 0x80860000 0x0 0x20000>;
 			compatible = "qcom,cmd-db";
 			no-map;
 		};
 
-		reserved_xbl_uefi_log: memory@80880000 {
+		reserved_xbl_uefi_log: xbl-uefi-res@80880000 {
 			reg = <0x0 0x80884000 0x0 0x10000>;
 			no-map;
 		};
 
-		sec_apps_mem: memory@808ff000 {
+		sec_apps_mem: sec-apps@808ff000 {
 			reg = <0x0 0x808ff000 0x0 0x1000>;
 			no-map;
 		};
 
-		smem_mem: memory@80900000 {
+		smem_mem: smem@80900000 {
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
 
-		cpucp_mem: memory@80b00000 {
+		cpucp_mem: cpucp@80b00000 {
 			no-map;
 			reg = <0x0 0x80b00000 0x0 0x100000>;
 		};
 
-		wlan_fw_mem: memory@80c00000 {
+		wlan_fw_mem: wlan-fw@80c00000 {
 			reg = <0x0 0x80c00000 0x0 0xc00000>;
 			no-map;
 		};
 
-		video_mem: memory@8b200000 {
+		adsp_mem: adsp@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: video@8b200000 {
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
 
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
-		ipa_fw_mem: memory@8b700000 {
+		ipa_fw_mem: ipa-fw@8b700000 {
 			reg = <0 0x8b700000 0 0x10000>;
 			no-map;
 		};
 
+		gpu_zap_mem: zap@8b71a000 {
+			reg = <0 0x8b71a000 0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
-		rmtfs_mem: memory@9c900000 {
+		rmtfs_mem: rmtfs@9c900000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0x9c900000 0x0 0x280000>;
 			no-map;
@@ -906,7 +932,7 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_phy>,
-				 <0>, <0>, <0>,
+				 <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
@@ -974,6 +1000,7 @@
 
 			bus-width = <8>;
 			supports-cqe;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -2034,6 +2061,11 @@
 			};
 		};
 
+		rng: rng@10d3000 {
+			compatible = "qcom,sc7280-trng", "qcom,trng";
+			reg = <0 0x010d3000 0 0x1000>;
+		};
+
 		cnoc2: interconnect@1500000 {
 			reg = <0 0x01500000 0 0x1000>;
 			compatible = "qcom,sc7280-cnoc2";
@@ -2126,7 +2158,7 @@
 			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sc7280";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2233,6 +2265,99 @@
 			status = "disabled";
 		};
 
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sc7280-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc7280-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CLKREF_EN>;
+			clock-names = "ref", "ref_aux", "qref";
+
+			power-domains = <&rpmhpd SC7280_MX>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e6 0x0011>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e4 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sc7280-ipa";
 
@@ -2598,7 +2723,8 @@
 				    "cx_mem",
 				    "cx_dbgc";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&adreno_smmu 0 0x401>;
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
@@ -2608,6 +2734,10 @@
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_zap_mem>;
+			};
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2615,14 +2745,14 @@
 					opp-hz = /bits/ 64 <315000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <1804000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <4068000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				/* Only applicable for SKUs which has 550Mhz as Fmax */
@@ -2637,28 +2767,28 @@
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <6832000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-608000000 {
 					opp-hz = /bits/ 64 <608000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <8368000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-700000000 {
 					opp-hz = /bits/ 64 <700000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-812000000 {
 					opp-hz = /bits/ 64 <812000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-840000000 {
@@ -2772,12 +2902,12 @@
 					"gpu_cc_hub_aon_clk";
 
 			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sc7280-mpss-pas";
-			reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
+			reg = <0 0x04080000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3329,6 +3459,7 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 
 			bus-width = <4>;
+			dma-coherent;
 
 			qcom,dll-config = <0x0007642c>;
 
@@ -3399,6 +3530,32 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_2: usb@8cf8800 {
@@ -3426,8 +3583,8 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 13 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -3479,8 +3636,77 @@
 			status = "disabled";
 		};
 
+		remoteproc_adsp: remoteproc@3700000 {
+			compatible = "qcom,sc7280-adsp-pas";
+			reg = <0 0x03700000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_LCX>,
+					<&rpmhpd SC7280_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		remoteproc_wpss: remoteproc@8a00000 {
-			compatible = "qcom,sc7280-wpss-pil";
+			compatible = "qcom,sc7280-wpss-pas";
 			reg = <0 0x08a00000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
@@ -3492,12 +3718,8 @@
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
-				 <&gcc GCC_WPSS_AHB_CLK>,
-				 <&gcc GCC_WPSS_RSCP_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ahb_bdg", "ahb",
-				      "rscp", "xo";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
 
 			power-domains = <&rpmhpd SC7280_CX>,
 					<&rpmhpd SC7280_MX>;
@@ -3510,11 +3732,6 @@
 			qcom,smem-states = <&wpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
-				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
-			reset-names = "restart", "pdc_sync";
-
-			qcom,halt-regs = <&tcsr_1 0x17000>;
 
 			status = "disabled";
 
@@ -3656,6 +3873,144 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		remoteproc_cdsp: remoteproc@a300000 {
+			compatible = "qcom,sc7280-cdsp-pas";
+			reg = <0 0x0a300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MX>;
+			power-domain-names = "cx", "mx";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x11a1 0x0420>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x11a2 0x0420>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x11a3 0x0420>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x11a4 0x0420>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x11a5 0x0420>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x11a6 0x0420>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x11a7 0x0420>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x11a8 0x0420>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x11ab 0x0420>,
+							 <&apps_smmu 0x118b 0x0420>;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x11ac 0x0420>,
+							 <&apps_smmu 0x118c 0x0420>;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x11ad 0x0420>,
+							 <&apps_smmu 0x118d 0x0420>;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x11ae 0x0420>,
+							 <&apps_smmu 0x118e 0x0420>;
+					};
+				};
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -3681,9 +4036,9 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3793,6 +4148,86 @@
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -3847,8 +4282,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x900 0x402>;
 
@@ -4298,6 +4737,62 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";
@@ -5222,7 +5717,7 @@
 			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 			status = "reserved"; /* Owned by Gunyah hyp */
 		};
 

diff --git a/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts b/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
index 3ea07d0..0c22f3e 100644
--- a/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts

@@ -452,8 +452,8 @@
 };
 
 &pcie3 {
-	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>;
 	pinctrl-0 = <&pcie3_default_state>;
 	pinctrl-names = "default";
 

diff --git a/src/arm64/qcom/sc8180x-primus.dts b/src/arm64/qcom/sc8180x-primus.dts
index fd2fab4..bfee60c 100644
--- a/src/arm64/qcom/sc8180x-primus.dts
+++ b/src/arm64/qcom/sc8180x-primus.dts

@@ -43,7 +43,7 @@
 		pinctrl-0 = <&hall_int_active_state>;
 
 		lid-switch {
-			gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
 			wakeup-source;
@@ -386,12 +386,18 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l12e: ldo12 {
@@ -531,8 +537,8 @@
 };
 
 &pcie1 {
-	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_default_state>;
 

diff --git a/src/arm64/qcom/sc8180x.dtsi b/src/arm64/qcom/sc8180x.dtsi
index a34f438..0430d99 100644
--- a/src/arm64/qcom/sc8180x.dtsi
+++ b/src/arm64/qcom/sc8180x.dtsi

@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8180x.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1684,7 +1685,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1736,7 +1737,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1751,6 +1751,7 @@
 
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1761,7 +1762,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1781,7 +1782,7 @@
 			status = "disabled";
 		};
 
-		pcie3: pci@1c08000 {
+		pcie3: pcie@1c08000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1833,7 +1834,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
@@ -1848,6 +1848,7 @@
 
 			phys = <&pcie3_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1858,7 +1859,7 @@
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
 				 <&gcc GCC_PCIE_3_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
@@ -1879,7 +1880,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c10000 {
+		pcie1: pcie@1c10000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x68000000 0 0xf1d>,
@@ -1931,7 +1932,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1c80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
@@ -1946,6 +1946,7 @@
 
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1977,7 +1978,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c18000 {
+		pcie2: pcie@1c18000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c18000 0 0x3000>,
 			      <0 0x70000000 0 0xf1d>,
@@ -2029,7 +2030,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
 				    <0x100 &apps_smmu 0x1d01 0x1>;
 
@@ -2044,6 +2044,7 @@
 
 			phys = <&pcie2_phy>;
 			phy-names = "pciephy";
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -2062,7 +2063,7 @@
 				      "refgen",
 				      "pipe";
 			#clock-cells = <0>;
-			clock-output-names = "pcie_3_pipe_clk";
+			clock-output-names = "pcie_2_pipe_clk";
 
 			#phy-cells = <0>;
 
@@ -2114,6 +2115,14 @@
 					<0 0>,
 					<0 0>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
 			status = "disabled";
 		};
 
@@ -2548,10 +2557,10 @@
 		usb_prim: usb@a6f8800 {
 			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",
@@ -2622,10 +2631,10 @@
 				      "xo";
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -2704,11 +2713,15 @@
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&gcc GCC_DISP_HF_AXI_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
-					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
 				clock-names = "iface",
 					      "bus",
 					      "core",
-					      "vsync";
+					      "vsync",
+					      "rot",
+					      "lut";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
@@ -3117,8 +3130,6 @@
 				phys = <&edp_phy>;
 				phy-names = "dp";
 
-				#sound-dai-cells = <0>;
-
 				operating-points-v2 = <&edp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
 
@@ -3418,10 +3429,12 @@
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
 		};
 
 		apss_shared: mailbox@17c00000 {
-			compatible = "qcom,sc8180x-apss-shared";
+			compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared";
 			reg = <0x0 0x17c00000 0x0 0x1000>;
 			#mbox-cells = <1>;
 		};

diff --git a/src/arm64/qcom/sc8280xp-crd.dts b/src/arm64/qcom/sc8280xp-crd.dts
index e4861c6..4121556 100644
--- a/src/arm64/qcom/sc8280xp-crd.dts
+++ b/src/arm64/qcom/sc8280xp-crd.dts

@@ -458,6 +458,8 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -561,6 +563,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 

diff --git a/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 38edaf5..eb657e5 100644
--- a/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

@@ -82,6 +82,9 @@
 	leds {
 		compatible = "gpio-leds";
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
 		led-camera-indicator {
 			label = "white:camera-indicator";
 			function = LED_FUNCTION_INDICATOR;
@@ -570,6 +573,7 @@
 
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
+	/delete-property/ #sound-dai-cells;
 
 	data-lanes = <0 1 2 3>;
 
@@ -601,6 +605,7 @@
 };
 
 &mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
 	vdda-phy-supply = <&vreg_l6b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
@@ -717,6 +722,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
@@ -1277,6 +1284,13 @@
 		};
 	};
 
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";

diff --git a/src/arm64/qcom/sc8280xp.dtsi b/src/arm64/qcom/sc8280xp.dtsi
index cad59af..febf283 100644
--- a/src/arm64/qcom/sc8280xp.dtsi
+++ b/src/arm64/qcom/sc8280xp.dtsi

@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -2731,7 +2732,7 @@
 			status = "disabled";
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2807,7 +2808,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.6.0";
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2844,7 +2845,7 @@
 			#reset-cells = <1>;
 		};
 
-		swr2: soundwire-controller@3330000 {
+		swr2: soundwire@3330000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03330000 0 0x2000>;
 			interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
@@ -3450,6 +3451,20 @@
 			};
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc8280xp-camcc";
+			reg = <0 0x0ad00000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss0: display-subsystem@ae00000 {
 			compatible = "qcom,sc8280xp-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -4030,6 +4045,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -4225,7 +4241,7 @@
 			compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {

diff --git a/src/arm64/qcom/sdm630.dtsi b/src/arm64/qcom/sdm630.dtsi
index 775700f..513fe5e 100644
--- a/src/arm64/qcom/sdm630.dtsi
+++ b/src/arm64/qcom/sdm630.dtsi

@@ -606,9 +606,6 @@
 			compatible = "qcom,sdm660-bimc";
 			reg = <0x01008000 0x78000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		restart@10ac000 {
@@ -620,28 +617,17 @@
 			compatible = "qcom,sdm660-cnoc";
 			reg = <0x01500000 0x10000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@1626000 {
 			compatible = "qcom,sdm660-snoc";
 			reg = <0x01626000 0x7090>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		anoc2_smmu: iommu@16c0000 {
 			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
 			reg = <0x016c0000 0x40000>;
-
-			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <1000>;
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "bus";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -686,16 +672,12 @@
 			compatible = "qcom,sdm660-a2noc";
 			reg = <0x01704000 0xc100>;
 			#interconnect-cells = <1>;
-			clock-names = "bus",
-				      "bus_a",
-				      "ipa",
+			clock-names = "ipa",
 				      "ufs_axi",
 				      "aggre2_ufs_axi",
 				      "aggre2_usb3_axi",
 				      "cfg_noc_usb2_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&rpmcc RPM_SMD_IPA_CLK>,
+			clocks = <&rpmcc RPM_SMD_IPA_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -706,10 +688,8 @@
 			compatible = "qcom,sdm660-mnoc";
 			reg = <0x01745000 0xa010>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		tsens: thermal-sensor@10ae000 {
@@ -1186,7 +1166,9 @@
 			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
 				 <&gcc GCC_BIMC_GFX_CLK>,
 				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
-			clock-names = "iface", "mem", "mem_iface";
+			clock-names = "iface",
+			              "mem",
+				      "mem_iface";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -1288,20 +1270,16 @@
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc",
 				      "core",
 				      "iface",
 				      "sleep",
-				      "mock_utmi",
-				      "bus";
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>,
-					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>,
-					       <19200000>;
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
 
 			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
@@ -2204,10 +2182,9 @@
 
 			clocks = <&mmcc MNOC_AHB_CLK>,
 				 <&mmcc BIMC_SMMU_AHB_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
 				 <&mmcc BIMC_SMMU_AXI_CLK>;
 			clock-names = "iface-mm", "iface-smmu",
-				      "bus-mm", "bus-smmu";
+				      "bus-smmu";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -2324,12 +2301,6 @@
 			compatible = "qcom,sdm660-gnoc";
 			reg = <0x17900000 0xe000>;
 			#interconnect-cells = <1>;
-			/*
-			 * This one apparently features no clocks,
-			 * so let's not mess with the driver needlessly
-			 */
-			clock-names = "bus", "bus_a";
-			clocks = <&xo_board>, <&xo_board>;
 		};
 
 		apcs_glb: mailbox@17911000 {

diff --git a/src/arm64/qcom/sdm632-fairphone-fp3.dts b/src/arm64/qcom/sdm632-fairphone-fp3.dts
index 301eca9..057579a 100644
--- a/src/arm64/qcom/sdm632-fairphone-fp3.dts
+++ b/src/arm64/qcom/sdm632-fairphone-fp3.dts

@@ -80,6 +80,10 @@
 	};
 };
 
+&lpass {
+	status = "okay";
+};
+
 &pm8953_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -239,3 +243,18 @@
 &usb3_dwc3 {
 	dr_mode = "peripheral";
 };
+
+&wcnss {
+	status = "okay";
+
+	vddpx-supply = <&pm8953_l5>;
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3680";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};

diff --git a/src/arm64/qcom/sdm670.dtsi b/src/arm64/qcom/sdm670.dtsi
index ba2043d..4d7b77a 100644
--- a/src/arm64/qcom/sdm670.dtsi
+++ b/src/arm64/qcom/sdm670.dtsi

@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -400,6 +401,30 @@
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1295,10 +1320,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -1353,6 +1378,273 @@
 			#interrupt-cells = <4>;
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm670-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+				 <&apps_smmu 0xc80 0x8>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm670-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
@@ -1532,7 +1824,7 @@
 		};
 
 		cpufreq_hw: cpufreq@17d43000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sdm670-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 

diff --git a/src/arm64/qcom/sdm845-db845c.dts b/src/arm64/qcom/sdm845-db845c.dts
index c7eba6c..ab62204 100644
--- a/src/arm64/qcom/sdm845-db845c.dts
+++ b/src/arm64/qcom/sdm845-db845c.dts

@@ -67,8 +67,8 @@
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
 			default-state = "off";
+			panic-indicator;
 		};
 
 		led-1 {
@@ -1130,7 +1130,7 @@
 	vdd-rx-supply = <&vreg_s4a_1p8>;
 	vdd-io-supply = <&vreg_s4a_1p8>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,1 {
 			compatible = "sdw10217201000";
 			reg = <0 1>;

diff --git a/src/arm64/qcom/sdm845-oneplus-common.dtsi b/src/arm64/qcom/sdm845-oneplus-common.dtsi
index b523b5f..e821103 100644
--- a/src/arm64/qcom/sdm845-oneplus-common.dtsi
+++ b/src/arm64/qcom/sdm845-oneplus-common.dtsi

@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
@@ -484,6 +485,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &q6afedai {
 	qi2s@22 {
 		reg = <22>;

diff --git a/src/arm64/qcom/sdm845-wcd9340.dtsi b/src/arm64/qcom/sdm845-wcd9340.dtsi
index c15d488..6172cd1 100644
--- a/src/arm64/qcom/sdm845-wcd9340.dtsi
+++ b/src/arm64/qcom/sdm845-wcd9340.dtsi

@@ -54,7 +54,7 @@
 				reg = <0x42 0x2>;
 			};
 
-			swm: swm@c85 {
+			swm: soundwire@c85 {
 				compatible = "qcom,soundwire-v1.3.0";
 				reg = <0xc85 0x40>;
 				interrupts-extended = <&wcd9340 20>;

diff --git a/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi b/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 93b1582..617b17b 100644
--- a/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/src/arm64/qcom/sdm845-xiaomi-beryllium-common.dtsi

@@ -355,6 +355,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &pm8998_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";

diff --git a/src/arm64/qcom/sdm845.dtsi b/src/arm64/qcom/sdm845.dtsi
index bf5e6eb..c224482 100644
--- a/src/arm64/qcom/sdm845.dtsi
+++ b/src/arm64/qcom/sdm845.dtsi

@@ -2306,7 +2306,7 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c00000 0 0x2000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2405,7 +2405,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c08000 0 0x2000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2565,7 +2565,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
@@ -2595,30 +2595,50 @@
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sdm845-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2626,16 +2646,9 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -3545,11 +3558,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					etf_in: endpoint {
 						remote-endpoint =
 						  <&merge_funnel_out>;
@@ -4000,33 +4010,28 @@
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4053,10 +4058,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4104,10 +4109,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -4126,7 +4131,7 @@
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -5088,7 +5093,7 @@
 			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
 			reg = <0 0x17980000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		apss_shared: mailbox@17990000 {

diff --git a/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts b/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
index 92a812b..47dc42f 100644
--- a/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts

@@ -392,6 +392,8 @@
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+
+		wakeup-source;
 	};
 };
 
@@ -408,6 +410,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -482,6 +486,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c11_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -797,7 +803,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;

diff --git a/src/arm64/qcom/sdm850-samsung-w737.dts b/src/arm64/qcom/sdm850-samsung-w737.dts
index 5438373..2621783 100644
--- a/src/arm64/qcom/sdm850-samsung-w737.dts
+++ b/src/arm64/qcom/sdm850-samsung-w737.dts

@@ -658,7 +658,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;

diff --git a/src/arm64/qcom/sdx75-idp.dts b/src/arm64/qcom/sdx75-idp.dts
index a14e065..f76e72f 100644
--- a/src/arm64/qcom/sdx75-idp.dts
+++ b/src/arm64/qcom/sdx75-idp.dts

@@ -250,6 +250,11 @@
 	stdout-path = "serial0:115200n8";
 };
 
+&pm7550ba_eusb2_repeater {
+	vdd18-supply = <&vreg_l5b_1p776>;
+	vdd3-supply = <&vreg_l10b_3p08>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -261,3 +266,27 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4b_0p88>;
+	vdda12-supply = <&vreg_l1b_1p2>;
+
+	phys = <&pm7550ba_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+
+	status = "okay";
+};

diff --git a/src/arm64/qcom/sdx75.dtsi b/src/arm64/qcom/sdx75.dtsi
index e180aa4..7dbdf8c 100644
--- a/src/arm64/qcom/sdx75.dtsi
+++ b/src/arm64/qcom/sdx75.dtsi

@@ -8,6 +8,8 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sdx75.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -203,6 +205,19 @@
 		};
 	};
 
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sdx75-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		clocks = <&rpmhcc RPMH_QPIC_CLK>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sdx75-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x0>;
@@ -434,6 +449,9 @@
 			clock-names = "m-ahb",
 				      "s-ahb";
 			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -444,6 +462,12 @@
 				reg = <0x0 0x00984000 0x0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-0 = <&qupv3_se1_2uart_active>;
 				pinctrl-1 = <&qupv3_se1_2uart_sleep>;
@@ -453,12 +477,144 @@
 			};
 		};
 
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x00ff4000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx75-qmp-usb3-uni-phy";
+			reg = <0x0 0x00ff6000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB2_CLKREF_EN>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		system_noc: interconnect@1640000 {
+			compatible = "qcom,sdx75-system-noc";
+			reg = <0x0 0x01640000 0x0 0x4b400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@16c0000 {
+			compatible = "qcom,sdx75-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0x14200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 			#hwlock-cells = <1>;
 		};
 
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 10 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			status = "disabled";
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x80 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>,
+				       <&usb_qmpphy>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sdx75-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>,
@@ -733,6 +889,20 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
+
+		dc_noc: interconnect@190e0000 {
+			compatible = "qcom,sdx75-dc-noc";
+			reg = <0x0 0x190e0000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sdx75-gem-noc";
+			reg = <0x0 0x19100000 0x0 0x34080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
 	};
 
 	timer {

diff --git a/src/arm64/qcom/sm4450-qrd.dts b/src/arm64/qcom/sm4450-qrd.dts
index 00a1c81..866e937 100644
--- a/src/arm64/qcom/sm4450-qrd.dts
+++ b/src/arm64/qcom/sm4450-qrd.dts

@@ -10,9 +10,23 @@
 	model = "Qualcomm Technologies, Inc. SM4450 QRD";
 	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
 
-	aliases { };
+	aliases {
+		serial0 = &uart7;
+	};
 
 	chosen {
-		bootargs = "console=hvc0";
+		stdout-path = "serial0:115200n8";
 	};
 };
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>; /* NFC eSE SPI */
+};
+
+&uart7 {
+	status = "okay";
+};

diff --git a/src/arm64/qcom/sm4450.dtsi b/src/arm64/qcom/sm4450.dtsi
index c4e5b33..3e7ae3b 100644
--- a/src/arm64/qcom/sm4450.dtsi
+++ b/src/arm64/qcom/sm4450.dtsi

@@ -3,8 +3,11 @@
  * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-gcc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -328,6 +331,18 @@
 		};
 	};
 
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -335,6 +350,43 @@
 		dma-ranges = <0 0 0 0 0x10 0>;
 		compatible = "simple-bus";
 
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm4450-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart7: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -351,6 +403,32 @@
 			interrupt-controller;
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm4450-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 137>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio23";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio22";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		intc: interrupt-controller@17200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
@@ -419,6 +497,35 @@
 				status = "disabled";
 			};
 		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm4450-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board>;
+				clock-names = "xo";
+			};
+		};
+
 	};
 
 	timer {

diff --git a/src/arm64/qcom/sm6115.dtsi b/src/arm64/qcom/sm6115.dtsi
index 839c603..f9849b8 100644
--- a/src/arm64/qcom/sm6115.dtsi
+++ b/src/arm64/qcom/sm6115.dtsi

@@ -10,6 +10,8 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
+#include <dt-bindings/interconnect/qcom,sm6115.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
@@ -264,6 +266,8 @@
 		scm: scm {
 			compatible = "qcom,scm-sm6115", "qcom,scm";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -273,6 +277,25 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -859,6 +882,43 @@
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,sm6115-snoc";
+			reg = <0x0 0x01880000 0x0 0x5f080>;
+			clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&rpmcc RPM_SMD_IPA_CLK>;
+			clock-names = "cpu_axi",
+				      "ufs_axi",
+				      "usb_axi",
+				      "ipa";
+			#interconnect-cells = <2>;
+
+			clk_virt: interconnect-clk {
+				compatible = "qcom,sm6115-clk-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,sm6115-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,sm6115-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,sm6115-cnoc";
+			reg = <0x0 0x01900000 0x0 0x6200>;
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>;
+			clock-names = "usb_axi";
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b40000 0x0 0x7000>;
@@ -883,6 +943,60 @@
 			clock-names = "core";
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,sm6115-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -912,6 +1026,12 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,sm6115-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
@@ -939,8 +1059,42 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			bus-width = <8>;
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -961,6 +1115,12 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0x00a0 0x0>;
 			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			bus-width = <4>;
 			qcom,dll-config = <0x0007642c>;
@@ -973,11 +1133,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -987,7 +1151,7 @@
 			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
@@ -1028,24 +1192,17 @@
 
 		ufs_mem_phy: phy@4807000 {
 			compatible = "qcom,sm6115-qmp-ufs-phy";
-			reg = <0x0 0x04807000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x04807000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref", "ref_aux";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@4807400 {
-				reg = <0x0 0x04807400 0x0 0x098>,
-				      <0x0 0x04807600 0x0 0x130>,
-				      <0x0 0x04807c00 0x0 0x16c>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		gpi_dma0: dma-controller@4a00000 {
@@ -1091,6 +1248,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1107,6 +1273,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1123,6 +1298,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1139,6 +1323,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1155,6 +1348,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1171,6 +1373,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1187,6 +1398,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1203,11 +1423,37 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;
@@ -1219,6 +1465,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1235,6 +1490,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1246,6 +1510,12 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1260,6 +1530,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1276,6 +1555,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1307,6 +1595,14 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			 /* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
@@ -1478,6 +1774,13 @@
 			iommus = <&apps_smmu 0x420 0x2>,
 				 <&apps_smmu 0x421 0x0>;
 
+			interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -2566,54 +2869,54 @@
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0 0x0f120000 0x0 0x1000>;
 			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x0 0x20000000>;
 			clock-frequency = <19200000>;
 
 			frame@f121000 {
-				reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
+				reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>;
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			frame@f123000 {
-				reg = <0x0 0x0f123000 0x0 0x1000>;
+				reg = <0x0 0x0f123000 0x1000>;
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f124000 {
-				reg = <0x0 0x0f124000 0x0 0x1000>;
+				reg = <0x0 0x0f124000 0x1000>;
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f125000 {
-				reg = <0x0 0x0f125000 0x0 0x1000>;
+				reg = <0x0 0x0f125000 0x1000>;
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f126000 {
-				reg = <0x0 0x0f126000 0x0 0x1000>;
+				reg = <0x0 0x0f126000 0x1000>;
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f127000 {
-				reg = <0x0 0x0f127000 0x0 0x1000>;
+				reg = <0x0 0x0f127000 0x1000>;
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f128000 {
-				reg = <0x0 0x0f128000 0x0 0x1000>;
+				reg = <0x0 0x0f128000 0x1000>;
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";

diff --git a/src/arm64/qcom/sm6125.dtsi b/src/arm64/qcom/sm6125.dtsi
index eb07eca..1dd3a40 100644
--- a/src/arm64/qcom/sm6125.dtsi
+++ b/src/arm64/qcom/sm6125.dtsi

@@ -1185,6 +1185,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <66666667>;
 
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";

diff --git a/src/arm64/qcom/sm6350.dtsi b/src/arm64/qcom/sm6350.dtsi
index 8fd6f4d..43cffe8 100644
--- a/src/arm64/qcom/sm6350.dtsi
+++ b/src/arm64/qcom/sm6350.dtsi

@@ -1142,7 +1142,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1187,10 +1187,7 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm6350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
 
 			clock-names = "ref",
 				      "ref_aux";
@@ -1200,16 +1197,9 @@
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
-			status = "disabled";
+			#phy-cells = <0>;
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x128>,
-				      <0 0x01d87600 0 0x1fc>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x128>,
-				      <0 0x01d87a00 0 0x1fc>;
-				#phy-cells = <0>;
-			};
+			status = "disabled";
 		};
 
 		ipa: ipa@1e40000 {
@@ -2524,7 +2514,7 @@
 			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {

diff --git a/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts b/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
index b2f1bb1..cca2c2e 100644
--- a/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts

@@ -80,6 +80,15 @@
 		};
 	};
 
+	touch_avdd: touch-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_avdd";
+		gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_avdd_default>;
+		enable-active-high;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -136,9 +145,10 @@
 		interrupts = <22 0x2008>;
 
 		vdd-supply = <&pm6125_l13>;
+		avdd-supply = <&touch_avdd>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+		pinctrl-0 = <&ts_int_default>;
 	};
 };
 
@@ -187,6 +197,11 @@
 	status = "okay";
 };
 
+&remoteproc_mss {
+	firmware-name = "qcom/sm6375/Sony/murray/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -238,8 +253,8 @@
 		};
 
 		pm6125_l7: l7 {
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <1050000>;
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
 		};
 
 		pm6125_l8: l8 {
@@ -306,7 +321,7 @@
 
 		pm6125_l21: l21 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l22: l22 {
@@ -317,7 +332,7 @@
 
 		pm6125_l23: l23 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l24: l24 {
@@ -340,8 +355,8 @@
 		};
 
 		pmr735a_l2: l2 {
-			regulator-min-microvolt = <352000>;
-			regulator-max-microvolt = <796000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		pmr735a_l3: l3 {
@@ -412,7 +427,7 @@
 		pins = "gpio59";
 		function = "gpio";
 		drive-strength = <8>;
-		output-high;
+		output-low;
 	};
 };
 
@@ -425,6 +440,18 @@
 };
 
 &usb_1_hsphy {
+	vdda-pll-supply = <&pm6125_l7>;
+	vdda18-supply = <&pm6125_l10>;
+	vdda33-supply = <&pmr735a_l7>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pmr735a_l2>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l2>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	vdd-3.3-ch1-supply = <&pm6125_l21>;
 	status = "okay";
 };
 

diff --git a/src/arm64/qcom/sm6375.dtsi b/src/arm64/qcom/sm6375.dtsi
index e7ff554..7ac8bf2 100644
--- a/src/arm64/qcom/sm6375.dtsi
+++ b/src/arm64/qcom/sm6375.dtsi

@@ -311,6 +311,25 @@
 		};
 	};
 
+	mpm: interrupt-controller {
+		compatible = "qcom,mpm";
+		qcom,rpm-msg-ram = <&apss_mpm>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#power-domain-cells = <0>;
+		interrupt-parent = <&intc>;
+		qcom,mpm-pin-count = <96>;
+		qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
+				   <12 422>, /* DWC3 ss_phy_irq */
+				   <86 183>, /* MPM wake, SPMI */
+				   <89 314>, /* TSENS0 0C */
+				   <90 315>, /* TSENS1 0C */
+				   <93 164>, /* DWC3 dm_hs_phy_irq */
+				   <94 165>; /* DWC3 dp_hs_phy_irq */
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -486,6 +505,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP_0>;
 		};
 	};
@@ -808,7 +828,7 @@
 			reg = <0 0x00500000 0 0x800000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&tlmm 0 0 157>;
-			/* TODO: Hook up MPM as wakeup-parent when it's there */
+			wakeup-parent = <&mpm>;
 			interrupt-controller;
 			gpio-controller;
 			#interrupt-cells = <2>;
@@ -896,6 +916,36 @@
 				drive-strength = <6>;
 				bias-disable;
 			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				cts-pins {
+					pins = "gpio61";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				rts-pins {
+					pins = "gpio62";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				tx-pins {
+					pins = "gpio63";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio64";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1400000 {
@@ -930,7 +980,7 @@
 			      <0 0x01c0a000 0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -962,8 +1012,15 @@
 		};
 
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0 0x045f0000 0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -1111,6 +1168,19 @@
 				status = "disabled";
 			};
 
+			uart1: serial@4a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 			i2c2: i2c@4a88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a88000 0x0 0x4000>;
@@ -1360,10 +1430,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133333333>;
 
-			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
+					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",

diff --git a/src/arm64/qcom/sm8150-hdk.dts b/src/arm64/qcom/sm8150-hdk.dts
index bb161b5..de670b4 100644
--- a/src/arm64/qcom/sm8150-hdk.dts
+++ b/src/arm64/qcom/sm8150-hdk.dts

@@ -7,6 +7,7 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8150.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -54,6 +55,17 @@
 			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -127,8 +139,6 @@
 		vdda_sp_sensor:
 		vdda_ufs_2ln_core_1:
 		vdda_ufs_2ln_core_2:
-		vdda_usb_ss_dp_core_1:
-		vdda_usb_ss_dp_core_2:
 		vdda_qlink_lv:
 		vdda_qlink_lv_ck:
 		vreg_l5a_0p875: ldo5 {
@@ -210,6 +220,12 @@
 			regulator-max-microvolt = <3008000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	regulators-1 {
@@ -359,15 +375,210 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &gpu {
-	/*
-	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
-	 * after display support is added on this board.
-	 */
-	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pm8150b_typec_sbu_out>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4a_1p8>;
+		vcc-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
 	status = "okay";
 };
 
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l5a_0p875>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p875>;
+	status = "okay";
+};
+
+&pm8150b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
+	status = "okay";
+};
+
+&pm8150b_typec {
+	status = "okay";
+
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		altmodes {
+			displayport {
+				svid = /bits/ 16 <0xff01>;
+				vdo = <0x00001c46>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm8150b_typec_mux_in: endpoint {
+					remote-endpoint = <&usb_1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				pm8150b_typec_sbu_out: endpoint {
+					remote-endpoint = <&fsa4480_sbu_mux>;
+				};
+			};
+		};
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -378,6 +589,10 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -402,6 +617,13 @@
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <126 4>;
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-disable;
+	};
+
 };
 
 &uart2 {
@@ -445,13 +667,26 @@
 &usb_1_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pm8150b_typec_mux_in>;
 };
 
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
 &usb_2_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l5a_0p875>;
 };
 
 &usb_1 {
@@ -463,7 +698,16 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 };
 
 &usb_2_dwc3 {

diff --git a/src/arm64/qcom/sm8150.dtsi b/src/arm64/qcom/sm8150.dtsi
index 97623af..761a675 100644
--- a/src/arm64/qcom/sm8150.dtsi
+++ b/src/arm64/qcom/sm8150.dtsi

@@ -1824,7 +1824,7 @@
 			      <0x0 0x010ad000 0x0 0x3000>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1878,7 +1878,7 @@
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -1915,7 +1915,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1972,7 +1972,7 @@
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -2016,7 +2016,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2061,10 +2061,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8150-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2074,16 +2072,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2957,11 +2949,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					replicator1_in: endpoint {
 						remote-endpoint = <&replicator_out1>;
 					};
@@ -3447,37 +3436,56 @@
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>,
-				      <0 0x088eb600 0 0x200>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -3565,10 +3573,10 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3589,6 +3597,25 @@
 				snps,dis_enblslpm_quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};
 
@@ -3618,10 +3645,10 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
@@ -3640,7 +3667,7 @@
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -3719,6 +3746,13 @@
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -3746,6 +3780,86 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8150-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0x0ae90a00 0 0x600>,
+				      <0 0x0ae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8250_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -3932,6 +4046,7 @@
 				      "dp_phy_pll_link_clk",
 				      "dp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -4170,7 +4285,7 @@
 			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {

diff --git a/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi b/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
index 85e5cf3..946365f 100644
--- a/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi

@@ -6,6 +6,7 @@
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -23,7 +24,7 @@
 /delete-node/ &xbl_aop_mem;
 
 / {
-	classis-type = "tablet";
+	chassis-type = "tablet";
 
 	/* required for bootloader to select correct board */
 	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
@@ -114,7 +115,7 @@
 	};
 
 	reserved-memory {
-		xbl_aop_mem: xbl-aop@80700000 {
+		xbl_aop_mem: xbl-aop@80600000 {
 			reg = <0x0 0x80600000 0x0 0x260000>;
 			no-map;
 		};
@@ -627,6 +628,41 @@
 	};
 };
 
+&pm8150b_typec {
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_role_switch_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm8150b_vbus {
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -664,11 +700,12 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
+	usb-role-switch;
 };
 
 &usb_1_hsphy {
@@ -678,6 +715,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch_out {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
 &ufs_mem_hc {
 	vcc-supply = <&vreg_l17a_3p0>;
 	vcc-max-microamp = <800000>;

diff --git a/src/arm64/qcom/sm8250-xiaomi-pipa.dts b/src/arm64/qcom/sm8250-xiaomi-pipa.dts
new file mode 100644
index 0000000..86e1f7f
--- /dev/null
+++ b/src/arm64/qcom/sm8250-xiaomi-pipa.dts

@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Copyright (c) 2023 Luka Panio <lukapanio@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+
+	model = "Xiaomi Pad 6";
+	compatible = "xiaomi,pipa", "qcom,sm8250";
+
+	chassis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x34 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1800>;
+			height = <2880>;
+			stride = <(1800 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery_l: battery-l {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	battery_r: battery-r {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p35>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_r>;
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_l>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn";
+	status = "okay";
+};

diff --git a/src/arm64/qcom/sm8250.dtsi b/src/arm64/qcom/sm8250.dtsi
index be97047..760501c 100644
--- a/src/arm64/qcom/sm8250.dtsi
+++ b/src/arm64/qcom/sm8250.dtsi

@@ -671,6 +671,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8250", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -2123,7 +2124,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2227,7 +2228,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2328,7 +2329,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c10000 {
+		pcie2: pcie@1c10000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x64000000 0 0xf1d>,
@@ -2434,7 +2435,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2463,29 +2464,48 @@
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-37500000 {
+					opp-hz = /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8250-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2493,16 +2513,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2543,6 +2557,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8250-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		wsamacro: codec@3240000 {
 			compatible = "qcom,sm8250-lpass-wsa-macro";
 			reg = <0 0x03240000 0 0x1000>;
@@ -2565,7 +2584,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
@@ -2631,7 +2650,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			reg = <0 0x03210000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			status = "disabled";
@@ -2678,7 +2697,7 @@
 		};
 
 		/* tx macro */
-		swr2: soundwire-controller@3230000 {
+		swr2: soundwire@3230000 {
 			reg = <0 0x03230000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -3095,11 +3114,8 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					tpda_out_funnel_qatb: endpoint {
 						remote-endpoint = <&funnel_qatb_in_tpda>;
 					};
@@ -3142,11 +3158,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_qatb_in_tpda: endpoint {
 						remote-endpoint = <&tpda_out_funnel_qatb>;
 					};
@@ -3355,11 +3367,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					etf_in_funnel_swao_out: endpoint {
 						remote-endpoint = <&funnel_swao_out_etf>;
 					};
@@ -3443,8 +3452,6 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				port {
 					tpdm_mm_out_tpda9: endpoint {
 						remote-endpoint = <&tpda_9_in_tpdm_mm>;
@@ -3710,11 +3717,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_apss_merg_in_funnel_apss: endpoint {
 					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
 					};
@@ -3889,32 +3892,26 @@
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -4141,6 +4138,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -4209,6 +4207,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
@@ -4223,7 +4222,7 @@
 				iommus = <&apps_smmu 0x20 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -6018,7 +6017,7 @@
 			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
 			reg = <0 0x17c10000 0 0x1000>;
 			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		timer@17c20000 {

diff --git a/src/arm64/qcom/sm8350.dtsi b/src/arm64/qcom/sm8350.dtsi
index b462362..e78c83a 100644
--- a/src/arm64/qcom/sm8350.dtsi
+++ b/src/arm64/qcom/sm8350.dtsi

@@ -289,6 +289,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8350", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -677,9 +678,9 @@
 				 <0>,
 				 <0>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <0>;
 		};
@@ -919,9 +920,9 @@
 			};
 		};
 
-		gpi_dma0: dma-controller@9800000 {
+		gpi_dma0: dma-controller@900000 {
 			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
-			reg = <0 0x09800000 0 0x60000>;
+			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -1498,7 +1499,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1591,7 +1592,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1679,7 +1680,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1723,10 +1724,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -1734,17 +1733,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -1818,6 +1811,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8350-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0 0x20000>,
@@ -2021,7 +2019,7 @@
 			compatible = "qcom,sm8350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2063,7 +2061,7 @@
 			compatible = "qcom,sm8350-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2238,34 +2236,27 @@
 			};
 		};
 
-		usb_2_qmpphy: phy-wrapper@88eb000 {
+		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8350-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
+			reg = <0 0x088eb000 0 0x2000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
-
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			usb_2_ssphy: phy@88ebe00 {
-				reg = <0 0x088ebe00 0 0x200>,
-				      <0 0x088ec000 0 0x200>,
-				      <0 0x088eb200 0 0x1100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 		};
 
 		dc_noc: interconnect@90c0000 {
@@ -2418,7 +2409,7 @@
 				iommus = <&apps_smmu 0x20 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -2453,35 +2444,6 @@
 			#size-cells = <2>;
 			ranges;
 
-			dpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				/* TODO: opp-200000000 should work with
-				 * &rpmhpd_opp_low_svs, but one some of
-				 * sm8350_hdk boards reboot using this
-				 * opp.
-				 */
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-300000000 {
-					opp-hz = /bits/ 64 <300000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-345000000 {
-					opp-hz = /bits/ 64 <345000000>;
-					required-opps = <&rpmhpd_opp_svs_l1>;
-				};
-
-				opp-460000000 {
-					opp-hz = /bits/ 64 <460000000>;
-					required-opps = <&rpmhpd_opp_nom>;
-				};
-			};
-
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8350-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
@@ -2510,6 +2472,35 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <0>;
 
+				dpu_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-200000000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -3207,7 +3198,7 @@
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3512,7 +3503,7 @@
 			compatible = "qcom,sm8350-cdsp-pas";
 			reg = <0 0x98900000 0 0x1400000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,

diff --git a/src/arm64/qcom/sm8450-hdk.dts b/src/arm64/qcom/sm8450-hdk.dts
index 20153d0..a20d5d7 100644
--- a/src/arm64/qcom/sm8450-hdk.dts
+++ b/src/arm64/qcom/sm8450-hdk.dts

@@ -580,6 +580,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8450/a730_zap.mbn";
+	};
+};
+
 &i2c9 {
 	clock-frequency = <400000>;
 	status = "okay";

diff --git a/src/arm64/qcom/sm8450.dtsi b/src/arm64/qcom/sm8450.dtsi
index 1783fa7..01e4dfc 100644
--- a/src/arm64/qcom/sm8450.dtsi
+++ b/src/arm64/qcom/sm8450.dtsi

@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
 #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8450-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
@@ -18,6 +19,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/reset/qcom,sm8450-gpucc.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
@@ -754,9 +756,9 @@
 				 <&pcie0_phy>,
 				 <&pcie1_phy>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
@@ -1739,7 +1741,12 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8450-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8450-pcie0";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1848,7 +1855,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8450-pcie1";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2014,6 +2021,206 @@
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-730.1", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-818000000 {
+					opp-hz = /bits/ 64 <818000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-791000000 {
+					opp-hz = /bits/ 64 <791000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-734000000 {
+					opp-hz = /bits/ 64 <734000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-599000000 {
+					opp-hz = /bits/ 64 <599000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-545000000 {
+					opp-hz = /bits/ 64 <545000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-492000000 {
+					opp-hz = /bits/ 64 <492000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-421000000 {
+					opp-hz = /bits/ 64 <421000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-317000000 {
+					opp-hz = /bits/ 64 <317000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-285000000 {
+					opp-hz = /bits/ 64 <285000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8450-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "gmu",
+				      "hub",
+				      "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm8450-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -2149,18 +2356,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr4: soundwire-controller@31f0000 {
+		swr4: soundwire@31f0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x031f0000 0 0x2000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2168,6 +2370,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2197,18 +2402,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2218,6 +2417,9 @@
 			qcom,din-ports = <0>;
 			qcom,dout-ports = <5>;
 
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
@@ -2243,14 +2445,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2264,18 +2461,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03250000 0 0x2000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2283,6 +2474,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2302,17 +2496,20 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@33b0000 {
+		swr2: soundwire@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x033b0000 0 0x2000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2339,8 +2536,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec", "npl";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
@@ -4122,7 +4317,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -4171,10 +4366,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8450-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref", "ref_aux", "qref";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -4182,17 +4375,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ice: crypto@1d88000 {

diff --git a/src/arm64/qcom/sm8550-mtp.dts b/src/arm64/qcom/sm8550-mtp.dts
index 9a70875..c1135ad 100644
--- a/src/arm64/qcom/sm8550-mtp.dts
+++ b/src/arm64/qcom/sm8550-mtp.dts

@@ -10,6 +10,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -510,6 +511,134 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_s6g_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
 };
 
 &i2c_master_hub_0 {

diff --git a/src/arm64/qcom/sm8550-qrd.dts b/src/arm64/qcom/sm8550-qrd.dts
index eef811d..d401d63 100644
--- a/src/arm64/qcom/sm8550-qrd.dts
+++ b/src/arm64/qcom/sm8550-qrd.dts

@@ -11,6 +11,7 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
@@ -527,6 +528,126 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_s6g_1p86>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &i2c_master_hub_0 {
@@ -585,6 +706,13 @@
 	};
 };
 
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8550/ipa_fws.mbn";
+	status = "okay";
+};
+
 &gcc {
 	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
 		 <&pcie0_phy>,
@@ -596,6 +724,14 @@
 		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio17";

diff --git a/src/arm64/qcom/sm8550.dtsi b/src/arm64/qcom/sm8550.dtsi
index 7b9ddde..ee1ba5a 100644
--- a/src/arm64/qcom/sm8550.dtsi
+++ b/src/arm64/qcom/sm8550.dtsi

@@ -285,9 +285,9 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <800>;
+				entry-latency-us = <550>;
 				exit-latency-us = <750>;
-				min-residency-us = <4090>;
+				min-residency-us = <6700>;
 				local-timer-stop;
 			};
 
@@ -296,27 +296,37 @@
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <600>;
-				exit-latency-us = <1550>;
-				min-residency-us = <4791>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
 				local-timer-stop;
 			};
+
+			PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "goldplus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
 		};
 
 		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
-				entry-latency-us = <1050>;
-				exit-latency-us = <2500>;
-				min-residency-us = <5309>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
 			};
 
 			CLUSTER_SLEEP_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <2700>;
-				exit-latency-us = <3500>;
-				min-residency-us = <13959>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
 			};
 		};
 	};
@@ -324,6 +334,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8550", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x19000>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 		};
 	};
@@ -400,7 +411,7 @@
 		CPU_PD7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			domain-idle-states = <&PRIME_CPU_SLEEP_0>;
 		};
 
 		CLUSTER_PD: power-domain-cluster {
@@ -1677,7 +1688,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8550-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0 0x01c00000 0 0x3000>,
@@ -1768,7 +1784,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0x0 0x01c08000 0x0 0x3000>,
@@ -1979,6 +1995,128 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43050a01", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			/* Speedbin needs more work on A740+, keep only lower freqs */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-680000000 {
+					opp-hz = /bits/ 64 <680000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-615000000 {
+					opp-hz = /bits/ 64 <615000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-475000000 {
+					opp-hz = /bits/ 64 <475000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-401000000 {
+					opp-hz = /bits/ 64 <401000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-348000000 {
+					opp-hz = /bits/ 64 <348000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+				};
+
+				opp-295000000 {
+					opp-hz = /bits/ 64 <295000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm8550-gpucc";
 			reg = <0 0x03d90000 0 0xa000>;
@@ -1990,6 +2128,89 @@
 			#power-domain-cells = <1>;
 		};
 
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
@@ -2040,17 +2261,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2058,6 +2275,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2086,17 +2306,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2104,18 +2319,21 @@
 			clock-names = "iface";
 			label = "RX";
 
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
-			qcom,din-ports = <0>;
-			qcom,dout-ports = <10>;
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
 
-			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
 
 			#address-cells = <2>;
 			#size-cells = <0>;
@@ -2131,14 +2349,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2151,17 +2364,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2169,6 +2377,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2188,16 +2399,19 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
-			clocks = <&lpass_vamacro>;
+			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2224,9 +2438,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
 			#sound-dai-cells = <1>;
@@ -2923,8 +3134,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",

diff --git a/src/arm64/qcom/sm8650-mtp.dts b/src/arm64/qcom/sm8650-mtp.dts
new file mode 100644
index 0000000..be133a3
--- /dev/null
+++ b/src/arm64/qcom/sm8650-mtp.dts

@@ -0,0 +1,727 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 MTP";
+	compatible = "qcom,sm8650-mtp", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3e_0p9>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+	vdda-qref-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		output-disable;
+		power-source = <1>; /* 1.8 V */
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
+ * USB SS -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};

diff --git a/src/arm64/qcom/sm8650-qrd.dts b/src/arm64/qcom/sm8650-qrd.dts
new file mode 100644
index 0000000..b9151c2
--- /dev/null
+++ b/src/arm64/qcom/sm8650-qrd.dts

@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 QRD";
+	compatible = "qcom,sm8650-qrd", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+		serial1 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8650/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pmk8550_rtc {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&spi4 {
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_irq: ts-irq-state {
+		pins = "gpio161";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-disable;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio162";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		vddio-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_l15b_1p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa0p8-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p9-supply = <&vreg_s6c_1p8>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
+ * USB SS -> NB7VPQ904MMUTWG -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};

diff --git a/src/arm64/qcom/sm8650.dtsi b/src/arm64/qcom/sm8650.dtsi
new file mode 100644
index 0000000..2df7712
--- /dev/null
+++ b/src/arm64/qcom/sm8650.dtsi

@@ -0,0 +1,6013 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sm8650-gpucc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0x100>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x200>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x300>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x400>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x500>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x600>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x4";
+			reg = <0 0x700>;
+
+			clocks = <&cpufreq_hw 2>;
+
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <588>;
+
+			qcom,freq-domain = <&cpufreq_hw 2>;
+
+			#cooling-cells = <2>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			SILVER_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			GOLD_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8650", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8650-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8650-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>,
+					     <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0 0x80000000 0 0xe00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm@80e00000 {
+			reg = <0 0x80e00000 0 0x400000>;
+			no-map;
+		};
+
+		/* Merged xbl_dtlog, xbl_ramdump and aop_image regions */
+		xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		/* Secdata region can be reused by apps */
+
+		smem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi@81f00000 {
+			reg = <0 0x81f00000 0 0x20000>;
+			no-map;
+		};
+
+		pvmfw_mem: pvmfw@824a0000 {
+			reg = <0 0x824a0000 0 0x100000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@82800000 {
+			reg = <0 0x82800000 0 0x2000000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@86b00000 {
+			reg = <0 0x86b00000 0 0x4900000>;
+			no-map;
+		};
+
+		mpss_dsm_mem_2: mpss-dsm-2@8b400000 {
+			reg = <0 0x8b400000 0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8bc00000 {
+			reg = <0 0x8bc00000 0 0xf400000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+			reg = <0 0x9b000000 0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@9b080000 {
+			reg = <0 0x9b080000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@9b090000 {
+			reg = <0 0x9b090000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+			reg = <0 0x9b09a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss@9b0a0000 {
+			reg = <0 0x9b0a0000 0 0x1e0000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared@9b280000 {
+			reg = <0 0x9b280000 0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared@9b2e0000 {
+			reg = <0 0x9b2e0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera@9b300000 {
+			reg = <0 0x9b300000 0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@9bb00000 {
+			reg = <0 0x9bb00000 0 0x800000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@9c300000 {
+			reg = <0 0x9c300000 0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@9ca00000 {
+			reg = <0 0x9ca00000 0 0x1400000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 {
+			reg = <0 0x9de00000 0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 {
+			reg = <0 0x9de80000 0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@9df00000 {
+			reg = <0 0x9df00000 0 0x4080000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@d7c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xd7c00000 0 0x400000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		/* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */
+		tz_merged_mem: tz-merged@d8000000 {
+			reg = <0 0xd8000000 0 0x800000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf@e6440000 {
+			reg = <0 0xe6440000 0 0x2dd000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm@f3800000 {
+			reg = <0 0xf3800000 0 0x4400000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm@f7c00000 {
+			reg = <0 0xf7c00000 0 0x4c00000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0 0xff800000 0 0x600000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <435>, <428>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8650-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie_1_phy_aux_clk>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
+			reg = <0 0x00406000 0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			uart15: serial@89c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0 0x009c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			clock-names = "s-ahb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00980000 0 0x4000>;
+
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00984000 0 0x4000>;
+
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00988000 0 0x4000>;
+
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0098c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00990000 0 0x4000>;
+
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00994000 0 0x4000>;
+
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00998000 0 0x4000>;
+
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0099c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a0000 0 0x4000>;
+
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a4000 0 0x4000>;
+
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xc>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+
+			iommus = <&apps_smmu 0xa3 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8650-cnoc-main";
+			reg = <0 0x01500000 0 0x14080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8650-config-noc";
+			reg = <0 0x01600000 0 0x6200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8650-system-noc";
+			reg = <0 0x01680000 0 0x1d080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8650-pcie-anoc";
+			reg = <0 0x016c0000 0 0x12200>;
+
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8650-aggre1-noc";
+			reg = <0 0x016e0000 0 0x16400>;
+
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8650-aggre2-noc";
+			reg = <0 0x01700000 0 0x1e400>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8650-mmss-noc";
+			reg = <0 0x01780000 0 0x5b800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8650-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>,
+				 <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1480 0x1>,
+				    <0x100 &apps_smmu 0x1481 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			dma-coherent;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
+				 <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8650-qmp-ufs-phy";
+			reg = <0 0x01d80000 0 0x2000>;
+
+			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref",
+				      "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<100000000 403000000>,
+					<100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0>;
+
+			lanes-per-direction = <2>;
+			qcom,ice = <&ice>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8650-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sm8650-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0xa0000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8650-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8650-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+					<&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <1>;
+
+				label = "mpss";
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8650-lpass-lpiaon-noc";
+			reg = <0 0x07400000 0 0x19080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,sm8650-lpass-lpicx-noc";
+			reg = <0 0x07430000 0 0x3a200>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8650-lpass-ag-noc";
+			reg = <0 0x07e40000 0 0xe080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			iommus = <&apps_smmu 0x540 0>;
+
+			bus-width = <4>;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8650-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x1c00 0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8650-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupts-extended = <&mdss 0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae95000 0 0x200>,
+				      <0 0x0ae95200 0 0x280>,
+				      <0 0x0ae95500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae97000 0 0x200>,
+				      <0 0x0ae97200 0 0x280>,
+				      <0 0x0ae97500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp0: displayport-controller@af54000 {
+				compatible = "qcom,sm8650-dp";
+				reg = <0 0xaf54000 0 0x104>,
+				      <0 0xaf54200 0 0xc0>,
+				      <0 0xaf55000 0 0x770>,
+				      <0 0xaf56000 0 0x9c>,
+				      <0 0xaf57000 0 0x9c>;
+
+				interrupts-extended = <&mdss 12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				operating-points-v2 = <&dp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8650-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8650-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e3000 0 0x154>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x40 0>;
+
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,usb3_lpm_capable;
+				snps,usb2-lpm-disable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+
+				dma-coherent;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8650-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			interrupt-parent = <&intc>;
+
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>,
+					  <138 251 5>, <143 244 4>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c228000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c228000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <15>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c229000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c229000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c22a000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c22a000 0 0x1000>, /* TM */
+			      <0 0x0c224000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <13>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+
+			interrupt-controller;
+			#interrupt-cells = <4>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8650-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 211>;
+
+			wakeup-parent = <&pdc>;
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio66", "gpio67";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio70", "gpio71";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio74", "gpio75";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio78", "gpio79";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio60", "gpio61";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio63";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio3";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio7";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio11";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio19";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio23";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio27";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart15_default: qup-uart15-default-state {
+				/* TX, RX */
+				pins = "gpio30", "gpio31";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
+			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17140000 0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>,
+			      <0 0x17a30000 0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&CLUSTER_PD>;
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8650-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8650-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>,
+			      <0 0x17d94000 0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2",
+				    "freq-domain3";
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2",
+					  "dcvsh-irq-3";
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		pmu@24091000 {
+			compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x24091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <7980000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <12157000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <14060000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <16113000>;
+				};
+			};
+		};
+
+		pmu@240b7400 {
+			compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b7400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8650-gem-noc";
+			reg = <0 0x24100000 0 0xc5080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sm8650-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8650-adsp-pas";
+			reg = <0 0x30000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <2>;
+
+				label = "lpass";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "adsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1043 0x20>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1044 0x20>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1045 0x20>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1046 0x20>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1007 0x40>,
+							 <&apps_smmu 0x1067 0x0>,
+							 <&apps_smmu 0x1087 0x0>;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8650-nsp-noc";
+			reg = <0 0x320c0000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8650-cdsp-pas";
+			reg = <0 0x32300000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <5>;
+
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "cdsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+
+						iommus = <&apps_smmu 0x1961 0x0>,
+							 <&apps_smmu 0x0c01 0x20>,
+							 <&apps_smmu 0x19c1 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x19c2 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c03 0x20>,
+							 <&apps_smmu 0x19c3 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c04 0x20>,
+							 <&apps_smmu 0x19c4 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c05 0x20>,
+							 <&apps_smmu 0x19c5 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x19c6 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c07 0x20>,
+							 <&apps_smmu 0x19c7 0x0>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x19c8 0x0>;
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				ddr-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss4-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss5-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss6-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss6-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss7-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss7-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};

diff --git a/src/arm64/qcom/x1e80100-crd.dts b/src/arm64/qcom/x1e80100-crd.dts
new file mode 100644
index 0000000..7532d8e
--- /dev/null
+++ b/src/arm64/qcom/x1e80100-crd.dts

@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};

diff --git a/src/arm64/qcom/x1e80100-qcp.dts b/src/arm64/qcom/x1e80100-qcp.dts
new file mode 100644
index 0000000..a37ad94
--- /dev/null
+++ b/src/arm64/qcom/x1e80100-qcp.dts

@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 QCP";
+	compatible = "qcom,x1e80100-qcp", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vph_pwr>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vph_pwr>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <33 3>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};

diff --git a/src/arm64/qcom/x1e80100.dtsi b/src/arm64/qcom/x1e80100.dtsi
new file mode 100644
index 0000000..6f75fc3
--- /dev/null
+++ b/src/arm64/qcom/x1e80100.dtsi

@@ -0,0 +1,3527 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD8>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD9>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU10: cpu@20200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD10>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU11: cpu@20300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD11>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+
+				core1 {
+					cpu = <&CPU9>;
+				};
+
+				core2 {
+					cpu = <&CPU10>;
+				};
+
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CLUSTER_C4: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <180>;
+				exit-latency-us = <320>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_CL4: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "l2-ret";
+				arm,psci-suspend-param = <0x01000044>;
+				entry-latency-us = <350>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+
+			CLUSTER_CL5: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret-pll-off";
+				arm,psci-suspend-param = <0x01000054>;
+				entry-latency-us = <2200>;
+				exit-latency-us = <2500>;
+				min-residency-us = <7000>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-x1e80100", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,x1e80100-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,x1e80100-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD8: power-domain-cpu8 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD9: power-domain-cpu9 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD10: power-domain-cpu10 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD11: power-domain-cpu11 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CLUSTER_PD0: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD1: power-domain-cpu-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD2: power-domain-cpu-cluster2 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x800000>;
+			no-map;
+		};
+
+		hyp_elf_package_mem: hyp-elf-package@80800000 {
+			reg = <0x0 0x80800000 0x0 0x200000>;
+			no-map;
+		};
+
+		ncc_mem: ncc@80a00000 {
+			reg = <0x0 0x80a00000 0x0 0x400000>;
+			no-map;
+		};
+
+		cpucp_log_mem: cpucp-log@80e00000 {
+			reg = <0x0 0x80e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_mem: cpucp@80e40000 {
+			reg = <0x0 0x80e40000 0x0 0x540000>;
+			no-map;
+		};
+
+		reserved-region@81380000 {
+			reg = <0x0 0x81380000 0x0 0x80000>;
+			no-map;
+		};
+
+		tags_mem: tags-region@81400000 {
+			reg = <0x0 0x81400000 0x0 0x1a0000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@81a00000 {
+			reg = <0x0 0x81a00000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@81a40000 {
+			reg = <0x0 0x81a40000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@81c80000 {
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@81ca0000 {
+			reg = <0x0 0x81ca0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@81ce0000 {
+			reg = <0x0 0x81ce0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@81ce4000 {
+			reg = <0x0 0x81ce4000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@81cff000 {
+			reg = <0x0 0x81cff000 0x0 0x1000>;
+			no-map;
+		};
+
+		pdp_ns_shared_mem: pdp-ns-shared@81e00000 {
+			reg = <0x0 0x81e00000 0x0 0x100000>;
+			no-map;
+		};
+
+		gpu_prr_mem: gpu-prr@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x10000>;
+			no-map;
+		};
+
+		tpm_control_mem: tpm-control@81f10000 {
+			reg = <0x0 0x81f10000 0x0 0x10000>;
+			no-map;
+		};
+
+		usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 {
+			reg = <0x0 0x81f20000 0x0 0x10000>;
+			no-map;
+		};
+
+		pld_pep_mem: pld-pep@81f30000 {
+			reg = <0x0 0x81f30000 0x0 0x6000>;
+			no-map;
+		};
+
+		pld_gmu_mem: pld-gmu@81f36000 {
+			reg = <0x0 0x81f36000 0x0 0x1000>;
+			no-map;
+		};
+
+		pld_pdp_mem: pld-pdp@81f37000 {
+			reg = <0x0 0x81f37000 0x0 0x1000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0x0 0x82700000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 {
+			reg = <0x0 0x82800000 0x0 0xc00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 {
+			reg = <0x0 0x84b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 {
+			reg = <0x0 0x85300000 0x0 0x80000>;
+			no-map;
+		};
+
+		adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 {
+			reg = <0x0 0x866c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@86700000 {
+			reg = <0x0 0x86700000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_boot_mem: adsp-boot@86b00000 {
+			reg = <0x0 0x86b00000 0x0 0xc00000>;
+			no-map;
+		};
+
+		video_mem: video@87700000 {
+			reg = <0x0 0x87700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@87e00000 {
+			reg = <0x0 0x87e00000 0x0 0x3a00000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 {
+			reg = <0x0 0x8d900000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8d9fe000 {
+			reg = <0x0 0x8d9fe000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: camera@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x800000>;
+			no-map;
+		};
+
+		av1_encoder_mem: av1-encoder@8e900000 {
+			reg = <0x0 0x8e900000 0x0 0x700000>;
+			no-map;
+		};
+
+		reserved-region@8f000000 {
+			reg = <0x0 0x8f000000 0x0 0xa00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@8fa00000 {
+			reg = <0x0 0x8fa00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_wpss_dtb_mem: q6-wpss-dtb@91300000 {
+			reg = <0x0 0x91300000 0x0 0x80000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@d8000000 {
+			reg = <0x0 0xd8000000 0x0 0x40000>;
+			no-map;
+		};
+
+		reserved-region@d8040000 {
+			reg = <0x0 0xd8040000 0x0 0xa0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d80e0000 {
+			reg = <0x0 0xd80e0000 0x0 0x520000>;
+			no-map;
+		};
+
+		ta_mem: ta@d8600000 {
+			reg = <0x0 0xd8600000 0x0 0x8a00000>;
+			no-map;
+		};
+
+		tags_mem1: tags@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x26a0000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0x0 0xff800000 0x0 0x600000>;
+			no-map;
+		};
+
+		smem_mem: smem@ffe00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,x1e80100-gcc";
+			reg = <0 0x00100000 0 0x200000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c16: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi16: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c17: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c17_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi17: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c18: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c18_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi18: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c19: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c19_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi19: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c20: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c20_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi20: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c21: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c21_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi21: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart21: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c22: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c22_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi22: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c23: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c23_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi23: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x136 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x123 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@b00000  {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00b00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x456 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_0: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00bc0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x443 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@b84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@b84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@b88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@b88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0xb88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@b8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@b8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@b90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@b90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@b94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@b94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@b98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@b98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@b9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@b9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,x1e80100-cnoc-main";
+			reg = <0 0x1500000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,x1e80100-cnoc-cfg";
+			reg = <0 0x1600000 0 0x6600>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,x1e80100-system-noc";
+			reg = <0 0x1680000 0 0x1c080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_south_anoc: interconnect@16c0000 {
+			compatible = "qcom,x1e80100-pcie-south-anoc";
+			reg = <0 0x16c0000 0 0xd080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_center_anoc: interconnect@16d0000 {
+			compatible = "qcom,x1e80100-pcie-center-anoc";
+			reg = <0 0x16d0000 0 0x7000>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,x1e80100-aggre1-noc";
+			reg = <0 0x16E0000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,x1e80100-aggre2-noc";
+			reg = <0 0x1700000 0 0x1c400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_north_anoc: interconnect@1740000 {
+			compatible = "qcom,x1e80100-pcie-north-anoc";
+			reg = <0 0x1740000 0 0x9080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_center_anoc: interconnect@1750000 {
+			compatible = "qcom,x1e80100-usb-center-anoc";
+			reg = <0 0x1750000 0 0x8800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_north_anoc: interconnect@1760000 {
+			compatible = "qcom,x1e80100-usb-north-anoc";
+			reg = <0 0x1760000 0 0x7080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_south_anoc: interconnect@1770000 {
+			compatible = "qcom,x1e80100-usb-south-anoc";
+			reg = <0 0x1770000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,x1e80100-mmss-noc";
+			reg = <0 0x1780000 0 0x5B800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		gem_noc: interconnect@26400000 {
+			compatible = "qcom,x1e80100-gem-noc";
+			reg = <0 0x26400000 0 0x311200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,x1e80100-nsp-noc";
+			reg = <0 0x320C0000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,x1e80100-lpass-ag-noc";
+			reg = <0 0x7e40000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,x1e80100-lpass-lpiaon-noc";
+			reg = <0 0x7400000 0 0x19080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,x1e80100-lpass-lpicx-noc";
+			reg = <0 0x7430000 0 0x3A200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,x1e80100-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			qcom,pdc-ranges = <0 480 42>, <42 251 5>,
+					  <47 522 52>, <99 609 32>,
+					  <131 717 12>, <143 816 19>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,x1e80100-tlmm";
+			reg = <0 0x0f100000 0 0xf00000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 239>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup0_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup0_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup0_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup0_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup0_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup0_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup0_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio14", "gpio15";
+				function = "qup0_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio54", "gpio55";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio84", "gpio85";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c22_data_clk: qup-i2c22-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio88", "gpio89";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c23_data_clk: qup-i2c23-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio27";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio13";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio14", "gpio15", "gpio12";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio53";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio54", "gpio55", "gpio52";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio67";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio71";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio75";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio72", "gpio73", "gpio74";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio79";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio76", "gpio77", "gpio78";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_cs: qup-spi20-cs-state {
+				pins = "gpio83";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_data_clk: qup-spi20-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_cs: qup-spi21-cs-state {
+				pins = "gpio87";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_data_clk: qup-spi21-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio84", "gpio85", "gpio86";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_cs: qup-spi22-cs-state {
+				pins = "gpio91";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_data_clk: qup-spi22-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio88", "gpio89", "gpio90";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_cs: qup-spi23-cs-state {
+				pins = "gpio85";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_data_clk: qup-spi23-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio86", "gpio87", "gpio84";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart21_default: qup-uart21-default-state {
+				/* TX, RX */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se5";
+				drive-strength= <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+		};
+
+		intc: interrupt-controller@17000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17000000 0 0x10000>,     /* GICD */
+			      <0 0x17080000 0 0x480000>;    /* GICR * 12 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17040000 0 0x40000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17500000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17500000 0 0x10000>,
+			      <0 0x17510000 0 0x10000>,
+			      <0 0x17520000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			qcom,drv-count = <3>;
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,x1e80100-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,x1e80100-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		timer@17800000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17800000 0 0x1000>;
+
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0 0x20000000>;
+
+			frame@17801000 {
+				reg = <0 0x17801000 0x1000>,
+				      <0 0x17802000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17803000 {
+				reg = <0 0x17803000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17805000 {
+				reg = <0 0x17805000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17807000 {
+				reg = <0 0x17807000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17809000 {
+				reg = <0 0x17809000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1780b000 {
+				reg = <0 0x1780b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1780d000 {
+				reg = <0 0x1780d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,x1e80100-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>,
+			      <0 0x25c00000 0 0x200000>,
+			      <0 0x25e00000 0 0x200000>,
+			      <0 0x26000000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
commit	93743d241c64bc1f7ecbf3262d1683176551e11f	[log] [tgz]
author	Tom Rini <trini@konsulko.com>	Mon Apr 01 09:08:13 2024 -0400
committer	Tom Rini <trini@konsulko.com>	Mon Apr 01 09:08:13 2024 -0400
tree	11abd1331cf3b50d686ebe65a24e69373bac27e4
parent	53633a893a06bd5a0c807287d9cc29337806eaf7 [diff]