omap: Drop CONFIG_OMAP_VC_I2C_HS_MCODE
The symbol CONFIG_OMAP_VC_I2C_HS_MCODE always uses the default value.
Restructure the comment and code such that if a need arises later to use
another value we can address this then.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index a68f1d1..b7f7980 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -19,14 +19,6 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/clock.h>
-/*
- * Define Master code if there are multiple masters on the I2C_SR bus.
- * Normally not required
- */
-#ifndef CONFIG_OMAP_VC_I2C_HS_MCODE
-#define CONFIG_OMAP_VC_I2C_HS_MCODE 0x0
-#endif
-
/* Register defines and masks for VC IP Block */
/* PRM_VC_CFG_I2C_MODE */
#define PRM_VC_CFG_I2C_MODE_DFILTEREN_BIT (0x1 << 6)
@@ -84,8 +76,10 @@
(cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
writel(val, (*prcm)->prm_vc_cfg_i2c_clk);
- val = CONFIG_OMAP_VC_I2C_HS_MCODE <<
- PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
+ /*
+ * Master code if there are multiple masters on the I2C_SR bus.
+ */
+ val = 0x0 << PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
/* No HS mode for now */
val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT;
writel(val, (*prcm)->prm_vc_cfg_i2c_mode);
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e86e738..bb73ba7 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1987,7 +1987,6 @@
CONFIG_OMAP_USB2PHY2_HOST
CONFIG_OMAP_USB3PHY1_HOST
CONFIG_OMAP_USB_PHY
-CONFIG_OMAP_VC_I2C_HS_MCODE
CONFIG_OPTREX_BW
CONFIG_ORIGEN
CONFIG_OS1_ENV_ADDR