serial: serial_stm32: move clock config from driver to board
This patch removes the uart clock enable from serial driver & move it in the
board code.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/include/asm/arch-stm32f4/stm32_defs.h b/arch/arm/include/asm/arch-stm32f4/stm32_defs.h
new file mode 100644
index 0000000..29b98ae
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f4/stm32_defs.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __STM32_DEFS_H__
+#define __STM32_DEFS_H__
+#include <asm/arch/stm32_periph.h>
+
+int clock_setup(enum periph_clock);
+
+#endif
+
diff --git a/arch/arm/include/asm/arch-stm32f4/stm32_periph.h b/arch/arm/include/asm/arch-stm32f4/stm32_periph.h
new file mode 100644
index 0000000..a1af25c
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f4/stm32_periph.h
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+ UART1_GPIOA_9_10 = 0,
+ UART2_GPIOD_5_6,
+};
+
+enum periph_clock {
+ USART1_CLOCK_CFG = 0,
+ USART2_CLOCK_CFG,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/mach-stm32/stm32f4/clock.c b/arch/arm/mach-stm32/stm32f4/clock.c
index 3deb17a..576d3e6 100644
--- a/arch/arm/mach-stm32/stm32f4/clock.c
+++ b/arch/arm/mach-stm32/stm32f4/clock.c
@@ -11,6 +11,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/stm32.h>
+#include <asm/arch/stm32_periph.h>
#define RCC_CR_HSION (1 << 0)
#define RCC_CR_HSEON (1 << 16)
@@ -50,6 +51,14 @@
#define RCC_APB1ENR_PWREN (1 << 28)
+/*
+ * RCC USART specific definitions
+ */
+#define RCC_ENR_USART1EN (1 << 4)
+#define RCC_ENR_USART2EN (1 << 17)
+#define RCC_ENR_USART3EN (1 << 18)
+#define RCC_ENR_USART6EN (1 << 5)
+
#define PWR_CR_VOS0 (1 << 14)
#define PWR_CR_VOS1 (1 << 15)
#define PWR_CR_VOS_MASK 0xC000
@@ -221,3 +230,14 @@
break;
}
}
+
+void clock_setup(int peripheral)
+{
+ switch (peripheral) {
+ case USART1_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->apb2enr, RCC_ENR_USART1EN);
+ break;
+ default:
+ break;
+ }
+}