| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> |
| * |
| * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de) |
| * |
| * Copyright (C) 2005 HP Labs |
| */ |
| |
| #include <config.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <malloc.h> |
| #include <asm/io.h> |
| #include <linux/sizes.h> |
| #include <asm/gpio.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/at91_pio.h> |
| |
| #define GPIO_PER_BANK 32 |
| |
| static struct at91_port *at91_pio_get_port(unsigned port) |
| { |
| switch (port) { |
| case AT91_PIO_PORTA: |
| return (struct at91_port *)ATMEL_BASE_PIOA; |
| case AT91_PIO_PORTB: |
| return (struct at91_port *)ATMEL_BASE_PIOB; |
| case AT91_PIO_PORTC: |
| return (struct at91_port *)ATMEL_BASE_PIOC; |
| #if (ATMEL_PIO_PORTS > 3) |
| case AT91_PIO_PORTD: |
| return (struct at91_port *)ATMEL_BASE_PIOD; |
| #if (ATMEL_PIO_PORTS > 4) |
| case AT91_PIO_PORTE: |
| return (struct at91_port *)ATMEL_BASE_PIOE; |
| #endif |
| #endif |
| default: |
| printf("Error: at91_gpio: Fail to get PIO base!\n"); |
| return NULL; |
| } |
| } |
| |
| static void at91_set_port_pullup(struct at91_port *at91_port, unsigned offset, |
| int use_pullup) |
| { |
| u32 mask; |
| |
| mask = 1 << offset; |
| if (use_pullup) |
| writel(mask, &at91_port->puer); |
| else |
| writel(mask, &at91_port->pudr); |
| writel(mask, &at91_port->per); |
| } |
| |
| int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| at91_set_port_pullup(at91_port, pin, use_pullup); |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "GPIO" peripheral role. |
| */ |
| int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(mask, &at91_port->per); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "A" internal peripheral role. |
| */ |
| int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(mask, &at91_port->mux.pio2.asr); |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "B" internal peripheral role. |
| */ |
| int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(mask, &at91_port->mux.pio2.bsr); |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "A" internal peripheral role. |
| */ |
| int at91_pio3_set_a_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(readl(&at91_port->mux.pio3.abcdsr1) & ~mask, |
| &at91_port->mux.pio3.abcdsr1); |
| writel(readl(&at91_port->mux.pio3.abcdsr2) & ~mask, |
| &at91_port->mux.pio3.abcdsr2); |
| |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "B" internal peripheral role. |
| */ |
| int at91_pio3_set_b_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(readl(&at91_port->mux.pio3.abcdsr1) | mask, |
| &at91_port->mux.pio3.abcdsr1); |
| writel(readl(&at91_port->mux.pio3.abcdsr2) & ~mask, |
| &at91_port->mux.pio3.abcdsr2); |
| |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| /* |
| * mux the pin to the "C" internal peripheral role. |
| */ |
| int at91_pio3_set_c_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(readl(&at91_port->mux.pio3.abcdsr1) & ~mask, |
| &at91_port->mux.pio3.abcdsr1); |
| writel(readl(&at91_port->mux.pio3.abcdsr2) | mask, |
| &at91_port->mux.pio3.abcdsr2); |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "D" internal peripheral role. |
| */ |
| int at91_pio3_set_d_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(readl(&at91_port->mux.pio3.abcdsr1) | mask, |
| &at91_port->mux.pio3.abcdsr1); |
| writel(readl(&at91_port->mux.pio3.abcdsr2) | mask, |
| &at91_port->mux.pio3.abcdsr2); |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| static bool at91_get_port_output(struct at91_port *at91_port, int offset) |
| { |
| u32 mask, val; |
| |
| mask = 1 << offset; |
| val = readl(&at91_port->osr); |
| return val & mask; |
| } |
| #endif |
| |
| static void at91_set_port_input(struct at91_port *at91_port, int offset, |
| int use_pullup) |
| { |
| u32 mask; |
| |
| mask = 1 << offset; |
| writel(mask, &at91_port->idr); |
| at91_set_port_pullup(at91_port, offset, use_pullup); |
| writel(mask, &at91_port->odr); |
| writel(mask, &at91_port->per); |
| } |
| |
| /* |
| * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and |
| * configure it for an input. |
| */ |
| int at91_set_pio_input(unsigned port, u32 pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| at91_set_port_input(at91_port, pin, use_pullup); |
| |
| return 0; |
| } |
| |
| static void at91_set_port_output(struct at91_port *at91_port, int offset, |
| int value) |
| { |
| u32 mask; |
| |
| mask = 1 << offset; |
| writel(mask, &at91_port->idr); |
| writel(mask, &at91_port->pudr); |
| if (value) |
| writel(mask, &at91_port->sodr); |
| else |
| writel(mask, &at91_port->codr); |
| writel(mask, &at91_port->oer); |
| writel(mask, &at91_port->per); |
| } |
| |
| /* |
| * mux the pin to the gpio controller (instead of "A" or "B" peripheral), |
| * and configure it for an output. |
| */ |
| int at91_set_pio_output(unsigned port, u32 pin, int value) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| at91_set_port_output(at91_port, pin, value); |
| |
| return 0; |
| } |
| |
| /* |
| * enable/disable the glitch filter. mostly used with IRQ handling. |
| */ |
| int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| if (is_on) |
| writel(mask, &at91_port->ifer); |
| else |
| writel(mask, &at91_port->ifdr); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * enable/disable the glitch filter. mostly used with IRQ handling. |
| */ |
| int at91_pio3_set_pio_deglitch(unsigned port, unsigned pin, int is_on) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| if (is_on) { |
| writel(mask, &at91_port->mux.pio3.ifscdr); |
| writel(mask, &at91_port->ifer); |
| } else { |
| writel(mask, &at91_port->ifdr); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * enable/disable the debounce filter. |
| */ |
| int at91_pio3_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| if (is_on) { |
| writel(mask, &at91_port->mux.pio3.ifscer); |
| writel(div & PIO_SCDR_DIV, &at91_port->mux.pio3.scdr); |
| writel(mask, &at91_port->ifer); |
| } else { |
| writel(mask, &at91_port->ifdr); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * enable/disable the pull-down. |
| * If pull-up already enabled while calling the function, we disable it. |
| */ |
| int at91_pio3_set_pio_pulldown(unsigned port, unsigned pin, int is_on) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| if (is_on) { |
| at91_set_pio_pullup(port, pin, 0); |
| writel(mask, &at91_port->mux.pio3.ppder); |
| } else |
| writel(mask, &at91_port->mux.pio3.ppddr); |
| } |
| |
| return 0; |
| } |
| |
| int at91_pio3_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (use_pullup) |
| at91_pio3_set_pio_pulldown(port, pin, 0); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| at91_set_port_pullup(at91_port, pin, use_pullup); |
| |
| return 0; |
| } |
| |
| /* |
| * disable Schmitt trigger |
| */ |
| int at91_pio3_set_pio_disable_schmitt_trig(unsigned port, unsigned pin) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(readl(&at91_port->schmitt) | mask, |
| &at91_port->schmitt); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * enable/disable the multi-driver. This is only valid for output and |
| * allows the output pin to run as an open collector output. |
| */ |
| int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| if (is_on) |
| writel(mask, &at91_port->mder); |
| else |
| writel(mask, &at91_port->mddr); |
| } |
| |
| return 0; |
| } |
| |
| static void at91_set_port_value(struct at91_port *at91_port, int offset, |
| int value) |
| { |
| u32 mask; |
| |
| mask = 1 << offset; |
| if (value) |
| writel(mask, &at91_port->sodr); |
| else |
| writel(mask, &at91_port->codr); |
| } |
| |
| /* |
| * assuming the pin is muxed as a gpio output, set its value. |
| */ |
| int at91_set_pio_value(unsigned port, unsigned pin, int value) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| at91_set_port_value(at91_port, pin, value); |
| |
| return 0; |
| } |
| |
| static int at91_get_port_value(struct at91_port *at91_port, int offset) |
| { |
| u32 pdsr = 0, mask; |
| |
| mask = 1 << offset; |
| pdsr = readl(&at91_port->pdsr) & mask; |
| |
| return pdsr != 0; |
| } |
| /* |
| * read the pin's value (works even if it's not muxed as a gpio). |
| */ |
| int at91_get_pio_value(unsigned port, unsigned pin) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| return at91_get_port_value(at91_port, pin); |
| |
| return 0; |
| } |
| |
| #if !CONFIG_IS_ENABLED(DM_GPIO) |
| /* Common GPIO API */ |
| |
| int gpio_request(unsigned gpio, const char *label) |
| { |
| return 0; |
| } |
| |
| int gpio_free(unsigned gpio) |
| { |
| return 0; |
| } |
| |
| int gpio_direction_input(unsigned gpio) |
| { |
| at91_set_pio_input(at91_gpio_to_port(gpio), |
| at91_gpio_to_pin(gpio), 0); |
| return 0; |
| } |
| |
| int gpio_direction_output(unsigned gpio, int value) |
| { |
| at91_set_pio_output(at91_gpio_to_port(gpio), |
| at91_gpio_to_pin(gpio), value); |
| return 0; |
| } |
| |
| int gpio_get_value(unsigned gpio) |
| { |
| return at91_get_pio_value(at91_gpio_to_port(gpio), |
| at91_gpio_to_pin(gpio)); |
| } |
| |
| int gpio_set_value(unsigned gpio, int value) |
| { |
| at91_set_pio_value(at91_gpio_to_port(gpio), |
| at91_gpio_to_pin(gpio), value); |
| |
| return 0; |
| } |
| #endif |
| |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| |
| struct at91_port_priv { |
| struct at91_port *regs; |
| }; |
| |
| /* set GPIO pin 'gpio' as an input */ |
| static int at91_gpio_direction_input(struct udevice *dev, unsigned offset) |
| { |
| struct at91_port_priv *port = dev_get_priv(dev); |
| |
| at91_set_port_input(port->regs, offset, 0); |
| |
| return 0; |
| } |
| |
| /* set GPIO pin 'gpio' as an output, with polarity 'value' */ |
| static int at91_gpio_direction_output(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct at91_port_priv *port = dev_get_priv(dev); |
| |
| at91_set_port_output(port->regs, offset, value); |
| |
| return 0; |
| } |
| |
| /* read GPIO IN value of pin 'gpio' */ |
| static int at91_gpio_get_value(struct udevice *dev, unsigned offset) |
| { |
| struct at91_port_priv *port = dev_get_priv(dev); |
| |
| return at91_get_port_value(port->regs, offset); |
| } |
| |
| /* write GPIO OUT value to pin 'gpio' */ |
| static int at91_gpio_set_value(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct at91_port_priv *port = dev_get_priv(dev); |
| |
| at91_set_port_value(port->regs, offset, value); |
| |
| return 0; |
| } |
| |
| static int at91_gpio_get_function(struct udevice *dev, unsigned offset) |
| { |
| struct at91_port_priv *port = dev_get_priv(dev); |
| |
| /* GPIOF_FUNC is not implemented yet */ |
| if (at91_get_port_output(port->regs, offset)) |
| return GPIOF_OUTPUT; |
| else |
| return GPIOF_INPUT; |
| } |
| |
| static const char *at91_get_bank_name(uint32_t base_addr) |
| { |
| switch (base_addr) { |
| case ATMEL_BASE_PIOA: |
| return "PIOA"; |
| case ATMEL_BASE_PIOB: |
| return "PIOB"; |
| case ATMEL_BASE_PIOC: |
| return "PIOC"; |
| #if (ATMEL_PIO_PORTS > 3) |
| case ATMEL_BASE_PIOD: |
| return "PIOD"; |
| #if (ATMEL_PIO_PORTS > 4) |
| case ATMEL_BASE_PIOE: |
| return "PIOE"; |
| #endif |
| #endif |
| } |
| |
| return "undefined"; |
| } |
| |
| static const struct dm_gpio_ops gpio_at91_ops = { |
| .direction_input = at91_gpio_direction_input, |
| .direction_output = at91_gpio_direction_output, |
| .get_value = at91_gpio_get_value, |
| .set_value = at91_gpio_set_value, |
| .get_function = at91_gpio_get_function, |
| }; |
| |
| static int at91_gpio_probe(struct udevice *dev) |
| { |
| struct at91_port_priv *port = dev_get_priv(dev); |
| struct at91_port_plat *plat = dev_get_plat(dev); |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct clk clk; |
| int ret; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_enable(&clk); |
| if (ret) |
| return ret; |
| |
| #if CONFIG_IS_ENABLED(OF_CONTROL) |
| plat->base_addr = dev_read_addr(dev); |
| #endif |
| plat->bank_name = at91_get_bank_name(plat->base_addr); |
| port->regs = (struct at91_port *)plat->base_addr; |
| |
| uc_priv->bank_name = plat->bank_name; |
| uc_priv->gpio_count = GPIO_PER_BANK; |
| |
| return 0; |
| } |
| |
| #if CONFIG_IS_ENABLED(OF_CONTROL) |
| static const struct udevice_id at91_gpio_ids[] = { |
| { .compatible = "atmel,at91rm9200-gpio" }, |
| { } |
| }; |
| #endif |
| |
| U_BOOT_DRIVER(atmel_at91rm9200_gpio) = { |
| .name = "atmel_at91rm9200_gpio", |
| .id = UCLASS_GPIO, |
| #if CONFIG_IS_ENABLED(OF_CONTROL) |
| .of_match = at91_gpio_ids, |
| .plat_auto = sizeof(struct at91_port_plat), |
| #endif |
| .ops = &gpio_at91_ops, |
| .probe = at91_gpio_probe, |
| .priv_auto = sizeof(struct at91_port_priv), |
| }; |
| #endif |