include/configs: Use new CONFIG_CMD_* in various B* named board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
diff --git a/include/configs/B2.h b/include/configs/B2.h
index e55858d..244ad4f 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -74,14 +74,17 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 5
#define CONFIG_ETHADDR 00:50:c2:1e:af:fb
diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h
index 46bdfa2..2569c91 100644
--- a/include/configs/BAB7xx.h
+++ b/include/configs/BAB7xx.h
@@ -68,12 +68,19 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 |\
- CFG_CMD_SCSI | CFG_CMD_IDE | CFG_CMD_DATE |\
- CFG_CMD_FDC | CFG_CMD_ELF)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FDC
+#define CONFIG_CMD_ELF
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -86,7 +93,7 @@
*/
#define CONFIG_CONS_INDEX 1
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -436,7 +443,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index bc30977..00b656e 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -61,11 +61,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -106,12 +101,6 @@
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#ifdef CONFIG_PCI
-# define ADD_PCI_CMD CFG_CMD_PCI
-#else
-# define ADD_PCI_CMD 0
-#endif
-
/*
* Video console
*/
@@ -126,12 +115,6 @@
# define CONFIG_SPLASH_SCREEN
# define CFG_CONSOLE_IS_IN_ENV
-#ifdef CONFIG_VIDEO
-# define ADD_BMP_CMD CFG_CMD_BMP
-#else
-# define ADD_BMP_CMD 0
-#endif
-
/*
* Partitions
*/
@@ -144,10 +127,7 @@
*/
#ifdef CONFIG_BC3450_USB
# define CONFIG_USB_OHCI
-# define ADD_USB_CMD CFG_CMD_USB
# define CONFIG_USB_STORAGE
-#else /* !CONFIG_BC3450_USB */
-# define ADD_USB_CMD 0
#endif /* CONFIG_BC3450_USB */
/*
@@ -165,59 +145,53 @@
# define CFG_CMD_POST_DIAG 0
#endif /* CONFIG_POST */
+
/*
- * IDE
+ * Command line configuration.
*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_POST_DIAG
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_BSP
+
+#ifdef CONFIG_VIDEO
+ #define CONFIG_CMD_BMP
+#endif
+
#ifdef CONFIG_BC3450_IDE
-# define ADD_IDE_CMD CFG_CMD_IDE
-#else
-# define ADD_IDE_CMD 0
-#endif /* CONFIG_BC3450_IDE */
+ #define CONFIG_CMD_IDE
+#endif
-/*
- * Filesystem support
- */
-#if defined (CONFIG_BC3450_IDE) || defined (CONFIG_BC3450_USB)
-#ifdef CONFIG_FAT
-# define ADD_FAT_CMD CFG_CMD_FAT
-#else
-# define ADD_FAT_CMD 0
-#endif /* CONFIG_FAT */
+#if defined(CONFIG_BC3450_IDE) || defined(CONFIG_BC3450_USB)
+ #ifdef CONFIG_FAT
+ #define CONFIG_CMD_FAT
+ #endif
-#ifdef CONFIG_EXT2
-# define ADD_EXT2_CMD CFG_CMD_EXT2
-#else
-# define ADD_EXT2_CMD 0
-#endif /* CONFIG_EXT2 */
-#endif /* CONFIG_BC3450_IDE / _USB */
+ #ifdef CONFIG_EXT2
+ #define CONFIG_CMD_EXT2
+ #endif
+#endif
-/*
- * Supported commands
- */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- ADD_BMP_CMD | \
- ADD_IDE_CMD | \
- ADD_FAT_CMD | \
- ADD_EXT2_CMD | \
- ADD_PCI_CMD | \
- ADD_USB_CMD | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_POST_DIAG | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SNTP | \
- CFG_CMD_BSP)
+#ifdef CONFIG_BC3450_USB
+ #define CONFIG_CMD_USB
+#endif
+
+#ifdef CONFIG_PCI
+ #define CONFIG_CMD_PCI
+#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_TIMESTAMP /* display image timestamps */
@@ -450,7 +424,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -469,6 +443,11 @@
#define CFG_HZ 1000 /* dec freq: 1ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
* which is normally part of the default commands (CFV_CMD_DFL)
diff --git a/include/configs/BMW.h b/include/configs/BMW.h
index 3bd43d8..b062316 100644
--- a/include/configs/BMW.h
+++ b/include/configs/BMW.h
@@ -64,28 +64,26 @@
#define CFG_DOC_SUPPORT_2000 1
#define CFG_DOC_SUPPORT_MILLENNIUM 1
#define CFG_DOC_SHORT_TIMEOUT 1
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DOC | \
- CFG_CMD_ELF | \
- 0 )
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_ELF
+
/* CFG_CMD_DOC required legacy NAND support */
#define CFG_NAND_LEGACY
#if 0
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | \
- CFG_CMD_PCI | CFG_CMD_DOC | CFG_CMD_DATE)
-
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
#endif
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
-
-
/*
* Miscellaneous configurable options
*/
@@ -293,7 +291,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif