rockchip: rk3288: move board_early_init_f() back to veyron
The board_early_init_f() is only used by veyron board now,
move it into the board file veyron.c
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index 9d88365..e629df3 100644
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -243,22 +243,3 @@
"display information about clocks",
""
);
-
-int board_early_init_f(void)
-{
- struct udevice *dev;
- int ret;
-
- /*
- * This init is done in SPL, but when chain-loading U-Boot SPL will
- * have been skipped. Allow the clock driver to check if it needs
- * setting up.
- */
- ret = rockchip_get_clk(&dev);
- if (ret) {
- debug("CLK init failed: %d\n", ret);
- return ret;
- }
-
- return 0;
-}
diff --git a/board/google/veyron/veyron.c b/board/google/veyron/veyron.c
index 19edb18..361f0e9 100644
--- a/board/google/veyron/veyron.c
+++ b/board/google/veyron/veyron.c
@@ -4,9 +4,29 @@
*/
#include <common.h>
+#include <asm/arch-rockchip/clock.h>
/*
* We should increase the DDR voltage to 1.2V using the PWM regulator.
* There is a U-Boot driver for this but it may need to add support for the
* 'voltage-table' property.
*/
+
+int board_early_init_f(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ /*
+ * This init is done in SPL, but when chain-loading U-Boot SPL will
+ * have been skipped. Allow the clock driver to check if it needs
+ * setting up.
+ */
+ ret = rockchip_get_clk(&dev);
+ if (ret) {
+ debug("CLK init failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}