tegra: video: Merge the two config structures together
We have a structure for the display panel and another for the controller.
There is some overlap between them. Merge them to simplify the driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/include/asm/arch-tegra20/display.h b/arch/arm/include/asm/arch-tegra20/display.h
index 35123ed..3f5f9b1 100644
--- a/arch/arm/include/asm/arch-tegra20/display.h
+++ b/arch/arm/include/asm/arch-tegra20/display.h
@@ -48,45 +48,6 @@
FDT_LCD_CACHE_FLUSH,
};
-/* Information about the display controller */
-struct fdt_disp_config {
- int valid; /* config is valid */
- int width; /* width in pixels */
- int height; /* height in pixels */
- int bpp; /* number of bits per pixel */
-
- /*
- * log2 of number of bpp, in general, unless it bpp is 24 in which
- * case this field holds 24 also! This is a U-Boot thing.
- */
- int log2_bpp;
- struct disp_ctlr *disp; /* Display controller to use */
- fdt_addr_t frame_buffer; /* Address of frame buffer */
- unsigned pixel_clock; /* Pixel clock in Hz */
- uint horiz_timing[FDT_LCD_TIMING_COUNT]; /* Horizontal timing */
- uint vert_timing[FDT_LCD_TIMING_COUNT]; /* Vertical timing */
- int panel_node; /* node offset of panel information */
-};
-
-/* Information about the LCD panel */
-struct fdt_panel_config {
- int pwm_channel; /* PWM channel to use for backlight */
- enum lcd_cache_t cache_type;
-
- struct gpio_desc backlight_en; /* GPIO for backlight enable */
- struct gpio_desc lvds_shutdown; /* GPIO for lvds shutdown */
- struct gpio_desc backlight_vdd; /* GPIO for backlight vdd */
- struct gpio_desc panel_vdd; /* GPIO for panel vdd */
- /*
- * Panel required timings
- * Timing 1: delay between panel_vdd-rise and data-rise
- * Timing 2: delay between data-rise and backlight_vdd-rise
- * Timing 3: delay between backlight_vdd and pwm-rise
- * Timing 4: delay between pwm-rise and backlight_en-rise
- */
- uint panel_timings[FDT_LCD_TIMINGS];
-};
-
/**
* Perform the next stage of the LCD init if it is time to do so.
*
diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
index fc70beb..8fc9c06 100644
--- a/drivers/video/tegra.c
+++ b/drivers/video/tegra.c
@@ -34,10 +34,44 @@
static enum stage_t stage; /* Current stage we are at */
static unsigned long timer_next; /* Time we can move onto next stage */
+/* Information about the display controller */
+struct tegra_lcd_priv {
+ int valid; /* config is valid */
+ int width; /* width in pixels */
+ int height; /* height in pixels */
+ int bpp; /* number of bits per pixel */
+
+ /*
+ * log2 of number of bpp, in general, unless it bpp is 24 in which
+ * case this field holds 24 also! This is a U-Boot thing.
+ */
+ int log2_bpp;
+ struct disp_ctlr *disp; /* Display controller to use */
+ fdt_addr_t frame_buffer; /* Address of frame buffer */
+ unsigned pixel_clock; /* Pixel clock in Hz */
+ uint horiz_timing[FDT_LCD_TIMING_COUNT]; /* Horizontal timing */
+ uint vert_timing[FDT_LCD_TIMING_COUNT]; /* Vertical timing */
+ int panel_node; /* node offset of panel information */
+ int pwm_channel; /* PWM channel to use for backlight */
+ enum lcd_cache_t cache_type;
+
+ struct gpio_desc backlight_en; /* GPIO for backlight enable */
+ struct gpio_desc lvds_shutdown; /* GPIO for lvds shutdown */
+ struct gpio_desc backlight_vdd; /* GPIO for backlight vdd */
+ struct gpio_desc panel_vdd; /* GPIO for panel vdd */
+ /*
+ * Panel required timings
+ * Timing 1: delay between panel_vdd-rise and data-rise
+ * Timing 2: delay between data-rise and backlight_vdd-rise
+ * Timing 3: delay between backlight_vdd and pwm-rise
+ * Timing 4: delay between pwm-rise and backlight_en-rise
+ */
+ uint panel_timings[FDT_LCD_TIMINGS];
+};
+
/* Our LCD config, set up in handle_stage() */
-static struct fdt_panel_config config;
-struct fdt_disp_config *disp_config; /* Display controller config */
-static struct fdt_disp_config dconfig;
+static struct tegra_lcd_priv config;
+struct tegra_lcd_priv *disp_config; /* Display controller config */
enum {
/* Maximum LCD size we support */
@@ -107,14 +141,14 @@
writel(val, &dc->cmd.state_ctrl);
}
-static void write_pair(struct fdt_disp_config *config, int item, u32 *reg)
+static void write_pair(struct tegra_lcd_priv *config, int item, u32 *reg)
{
writel(config->horiz_timing[item] |
(config->vert_timing[item] << 16), reg);
}
static int update_display_mode(struct dc_disp_reg *disp,
- struct fdt_disp_config *config)
+ struct tegra_lcd_priv *config)
{
unsigned long val;
unsigned long rate;
@@ -230,7 +264,7 @@
}
static int setup_window(struct disp_ctl_win *win,
- struct fdt_disp_config *config)
+ struct tegra_lcd_priv *config)
{
win->x = 0;
win->y = 0;
@@ -268,9 +302,9 @@
* @return pointer to display configuration, or NULL if there is no valid
* config
*/
-struct fdt_disp_config *tegra_display_get_config(void)
+struct tegra_lcd_priv *tegra_display_get_config(void)
{
- return dconfig.valid ? &dconfig : NULL;
+ return config.valid ? &config : NULL;
}
static void debug_timing(const char *name, unsigned int timing[])
@@ -294,7 +328,7 @@
* @return 0 if ok, -ve on error
*/
static int tegra_decode_panel(const void *blob, int node,
- struct fdt_disp_config *config)
+ struct tegra_lcd_priv *config)
{
int front, back, ref;
@@ -349,7 +383,7 @@
* @return 0 if ok, -ve on error
*/
static int tegra_display_decode_config(const void *blob,
- struct fdt_disp_config *config)
+ struct tegra_lcd_priv *config)
{
int node, rgb;
int bpp, bit;
@@ -403,7 +437,7 @@
*
* The frame buffer can be positioned by U-Boot or overriden by the fdt.
* You should pass in the U-Boot address here, and check the contents of
- * struct fdt_disp_config to see what was actually chosen.
+ * struct tegra_lcd_priv to see what was actually chosen.
*
* @param blob Device tree blob
* @param default_lcd_base Default address of LCD frame buffer
@@ -414,12 +448,12 @@
struct disp_ctl_win window;
struct dc_ctlr *dc;
- if (tegra_display_decode_config(blob, &dconfig))
+ if (tegra_display_decode_config(blob, &config))
return -1;
- dconfig.frame_buffer = (u32)default_lcd_base;
+ config.frame_buffer = (u32)default_lcd_base;
- dc = (struct dc_ctlr *)dconfig.disp;
+ dc = (struct dc_ctlr *)config.disp;
/*
* A header file for clock constants was NAKed upstream.
@@ -434,10 +468,10 @@
basic_init_timer(&dc->disp);
rgb_enable(&dc->com);
- if (dconfig.pixel_clock)
- update_display_mode(&dc->disp, &dconfig);
+ if (config.pixel_clock)
+ update_display_mode(&dc->disp, &config);
- if (setup_window(&window, &dconfig))
+ if (setup_window(&window, &config))
return -1;
update_window(dc, &window);
@@ -445,7 +479,7 @@
return 0;
}
-static void update_panel_size(struct fdt_disp_config *config)
+static void update_panel_size(struct tegra_lcd_priv *config)
{
panel_info.vl_col = config->width;
panel_info.vl_row = config->height;
@@ -515,7 +549,7 @@
* @param config structure to store fdt config into
* @return 0 if ok, -ve on error
*/
-static int fdt_decode_lcd(const void *blob, struct fdt_panel_config *config)
+static int fdt_decode_lcd(const void *blob, struct tegra_lcd_priv *config)
{
int display_node;