board: armltd: Add support for Total Compute platform
Total Compute is based on ARM architecture and has
the following features enabled in u-boot:
- PL011 UART
- PL180 MMC
- NOR Flash
- FIT image with Signature
- AVB
Signed-off-by: Usama Arif <usama.arif@arm.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9b8dadc..c5ebd59 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1198,6 +1198,15 @@
select USB
select DM_USB
+config TARGET_TOTAL_COMPUTE
+ bool "Support Total Compute Platform"
+ select ARM64
+ select PL01X_SERIAL
+ select DM
+ select DM_SERIAL
+ select DM_MMC
+ select DM_GPIO
+
config TARGET_LS2080A_EMU
bool "Support ls2080a_emu"
select ARCH_LS2080A
@@ -1904,6 +1913,8 @@
source "arch/arm/mach-nexell/Kconfig"
+source "board/armltd/total_compute/Kconfig"
+
source "board/bosch/shc/Kconfig"
source "board/bosch/guardian/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b2b5360..4bdfdf1 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -981,6 +981,8 @@
dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
+dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
+
dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
diff --git a/arch/arm/dts/total_compute.dts b/arch/arm/dts/total_compute.dts
new file mode 100644
index 0000000..4399269
--- /dev/null
+++ b/arch/arm/dts/total_compute.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Arm Limited
+ */
+
+/dts-v1/;
+
+/ {
+ model = "total_compute";
+ compatible = "arm,total_compute";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ sysreg: sysreg@1c010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x0 0x001c010000 0x0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ fixed_3v3: v2m-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmci@1c050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x0 0x001c050000 0x0 0x1000>;
+ cd-gpios = <&sysreg 0 0>;
+ arm,primecell-periphid = <0x00880180>;
+ wp-gpios = <&sysreg 1 0>;
+ bus-width = <8>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&fixed_3v3>;
+ clocks = <&clock24mhz>, <&clock24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ clock24mhz: clock24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "bp:clock24mhz";
+ };
+};
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 7dc87af..6ecb876 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -3,7 +3,7 @@
!defined(CONFIG_ARCH_BCM6858) && !defined(CONFIG_ARCH_BCM63158) && \
!defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_ASPEED) && \
!defined(CONFIG_ARCH_U8500) && !defined(CONFIG_CORTINA_PLATFORM) && \
- !defined(CONFIG_TARGET_BCMNS3)
+ !defined(CONFIG_TARGET_BCMNS3) && !defined(CONFIG_TARGET_TOTAL_COMPUTE)
#include <asm/arch/gpio.h>
#endif
#include <asm-generic/gpio.h>