reset: uniphier: Add USB glue reset support
Add reset control support in USB glue logic. This needs to control
the external clocks and resets for the logic before accessing the
glue logic.
The USB dm tree when using dwc3-generic is the following:
USB glue
+-- controller (need controller-reset)
+-- controller-reset (need syscon-reset)
+-- phy
The controller needs to deassert "controller-reset" in USB glue before
the controller registers are accessed. The glue needs to deassert
"syscon-reset" before the glue registers are accessed.
The glue itself doesn't have "syscon-reset", so the controller-reset
controls "syscon-reset" instead.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 7adae51..35e3cce 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -2,6 +2,7 @@
/*
* Copyright (C) 2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
*/
#include <common.h>
@@ -9,6 +10,8 @@
#include <log.h>
#include <malloc.h>
#include <reset-uclass.h>
+#include <clk.h>
+#include <reset.h>
#include <dm/device_compat.h>
#include <linux/bitops.h>
#include <linux/io.h>
@@ -178,10 +181,17 @@
UNIPHIER_RESET_END,
};
+/* Glue reset data */
+static const struct uniphier_reset_data uniphier_pro4_usb3_reset_data[] = {
+ UNIPHIER_RESETX(15, 0, 15)
+};
+
/* core implementaton */
struct uniphier_reset_priv {
void __iomem *base;
const struct uniphier_reset_data *data;
+ struct clk_bulk clks;
+ struct reset_ctl_bulk rsts;
};
static int uniphier_reset_update(struct reset_ctl *reset_ctl, int assert)
@@ -233,10 +243,47 @@
.rst_deassert = uniphier_reset_deassert,
};
+static int uniphier_reset_rst_init(struct udevice *dev)
+{
+ struct uniphier_reset_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = reset_get_bulk(dev, &priv->rsts);
+ if (ret == -ENOSYS || ret == -ENOENT)
+ return 0;
+ else if (ret)
+ return ret;
+
+ ret = reset_deassert_bulk(&priv->rsts);
+ if (ret)
+ reset_release_bulk(&priv->rsts);
+
+ return ret;
+}
+
+static int uniphier_reset_clk_init(struct udevice *dev)
+{
+ struct uniphier_reset_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = clk_get_bulk(dev, &priv->clks);
+ if (ret == -ENOSYS || ret == -ENOENT)
+ return 0;
+ if (ret)
+ return ret;
+
+ ret = clk_enable_bulk(&priv->clks);
+ if (ret)
+ clk_release_bulk(&priv->clks);
+
+ return ret;
+}
+
static int uniphier_reset_probe(struct udevice *dev)
{
struct uniphier_reset_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
+ int ret;
addr = dev_read_addr(dev->parent);
if (addr == FDT_ADDR_T_NONE)
@@ -248,7 +295,11 @@
priv->data = (void *)dev_get_driver_data(dev);
- return 0;
+ ret = uniphier_reset_clk_init(dev);
+ if (ret)
+ return ret;
+
+ return uniphier_reset_rst_init(dev);
}
static const struct udevice_id uniphier_reset_match[] = {
@@ -355,6 +406,31 @@
.compatible = "socionext,uniphier-pxs3-peri-reset",
.data = (ulong)uniphier_pro4_peri_reset_data,
},
+ /* USB glue reset */
+ {
+ .compatible = "socionext,uniphier-pro4-usb3-reset",
+ .data = (ulong)uniphier_pro4_usb3_reset_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pro5-usb3-reset",
+ .data = (ulong)uniphier_pro4_usb3_reset_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs2-usb3-reset",
+ .data = (ulong)uniphier_pro4_usb3_reset_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-usb3-reset",
+ .data = (ulong)uniphier_pro4_usb3_reset_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs3-usb3-reset",
+ .data = (ulong)uniphier_pro4_usb3_reset_data,
+ },
+ {
+ .compatible = "socionext,uniphier-nx1-usb3-reset",
+ .data = (ulong)uniphier_pro4_usb3_reset_data,
+ },
{ /* sentinel */ }
};