diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index 1293e18..540c016 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -108,8 +108,8 @@
 
 	writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
 	       &regs->grstctl);
-	ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_TXFFLSH,
-			   false, 1000, false);
+	ret = wait_for_bit_le32(&regs->grstctl, DWC2_GRSTCTL_TXFFLSH,
+				false, 1000, false);
 	if (ret)
 		printf("%s: Timeout!\n", __func__);
 
@@ -127,8 +127,8 @@
 	int ret;
 
 	writel(DWC2_GRSTCTL_RXFFLSH, &regs->grstctl);
-	ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_RXFFLSH,
-			   false, 1000, false);
+	ret = wait_for_bit_le32(&regs->grstctl, DWC2_GRSTCTL_RXFFLSH,
+				false, 1000, false);
 	if (ret)
 		printf("%s: Timeout!\n", __func__);
 
@@ -145,15 +145,15 @@
 	int ret;
 
 	/* Wait for AHB master IDLE state. */
-	ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_AHBIDLE,
-			   true, 1000, false);
+	ret = wait_for_bit_le32(&regs->grstctl, DWC2_GRSTCTL_AHBIDLE,
+				true, 1000, false);
 	if (ret)
 		printf("%s: Timeout!\n", __func__);
 
 	/* Core Soft Reset */
 	writel(DWC2_GRSTCTL_CSFTRST, &regs->grstctl);
-	ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_CSFTRST,
-			   false, 1000, false);
+	ret = wait_for_bit_le32(&regs->grstctl, DWC2_GRSTCTL_CSFTRST,
+				false, 1000, false);
 	if (ret)
 		printf("%s: Timeout!\n", __func__);
 
@@ -267,8 +267,8 @@
 		clrsetbits_le32(&regs->hc_regs[i].hcchar,
 				DWC2_HCCHAR_EPDIR,
 				DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
-		ret = wait_for_bit(__func__, &regs->hc_regs[i].hcchar,
-				   DWC2_HCCHAR_CHEN, false, 1000, false);
+		ret = wait_for_bit_le32(&regs->hc_regs[i].hcchar,
+					DWC2_HCCHAR_CHEN, false, 1000, false);
 		if (ret)
 			printf("%s: Timeout!\n", __func__);
 	}
@@ -783,8 +783,8 @@
 	int ret;
 	uint32_t hcint, hctsiz;
 
-	ret = wait_for_bit(__func__, &hc_regs->hcint, DWC2_HCINT_CHHLTD, true,
-			   1000, false);
+	ret = wait_for_bit_le32(&hc_regs->hcint, DWC2_HCINT_CHHLTD, true,
+				1000, false);
 	if (ret)
 		return ret;
 
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 2c0c633..f5320ca 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -133,8 +133,7 @@
 	setbits_le32(&ehci->usbcmd, CMD_RESET);
 
 	/* Wait for reset */
-	if (wait_for_bit(__func__, &ehci->usbcmd, CMD_RESET, false, 30,
-			 false)) {
+	if (wait_for_bit_le32(&ehci->usbcmd, CMD_RESET, false, 30, false)) {
 		printf("Stuck on USB reset.\n");
 		return -ETIMEDOUT;
 	}
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index fe2627e..2c8fc3c 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -142,13 +142,12 @@
 
 	/* Stop then Reset */
 	clrbits_le32(usb_cmd, UCMD_RUN_STOP);
-	ret = wait_for_bit(__func__, usb_cmd, UCMD_RUN_STOP, false, 10000,
-			   false);
+	ret = wait_for_bit_le32(usb_cmd, UCMD_RUN_STOP, false, 10000, false);
 	if (ret)
 		return ret;
 
 	setbits_le32(usb_cmd, UCMD_RESET);
-	ret = wait_for_bit(__func__, usb_cmd, UCMD_RESET, false, 10000, false);
+	ret = wait_for_bit_le32(usb_cmd, UCMD_RESET, false, 10000, false);
 	if (ret)
 		return ret;
 
diff --git a/drivers/usb/host/ohci-lpc32xx.c b/drivers/usb/host/ohci-lpc32xx.c
index 2f2b4b9..44a4980 100644
--- a/drivers/usb/host/ohci-lpc32xx.c
+++ b/drivers/usb/host/ohci-lpc32xx.c
@@ -143,8 +143,8 @@
 	setbits_le32(&clk_pwr->usb_ctrl, CLK_USBCTRL_POSTDIV_2POW(0x01));
 	setbits_le32(&clk_pwr->usb_ctrl, CLK_USBCTRL_PLL_PWRUP);
 
-	ret = wait_for_bit(__func__, &clk_pwr->usb_ctrl, CLK_USBCTRL_PLL_STS,
-			   true, CONFIG_SYS_HZ, false);
+	ret = wait_for_bit_le32(&clk_pwr->usb_ctrl, CLK_USBCTRL_PLL_STS,
+				true, CONFIG_SYS_HZ, false);
 	if (ret)
 		return ret;
 
@@ -178,8 +178,8 @@
 
 	/* enable I2C clock */
 	writel(OTG_CLK_I2C_EN, &otg->otg_clk_ctrl);
-	ret = wait_for_bit(__func__, &otg->otg_clk_sts, OTG_CLK_I2C_EN, true,
-			   CONFIG_SYS_HZ, false);
+	ret = wait_for_bit_le32(&otg->otg_clk_sts, OTG_CLK_I2C_EN, true,
+				CONFIG_SYS_HZ, false);
 	if (ret)
 		return ret;
 
@@ -199,8 +199,8 @@
 			 OTG_CLK_I2C_EN | OTG_CLK_HOST_EN;
 	writel(mask, &otg->otg_clk_ctrl);
 
-	ret = wait_for_bit(__func__, &otg->otg_clk_sts, mask, true,
-			   CONFIG_SYS_HZ, false);
+	ret = wait_for_bit_le32(&otg->otg_clk_sts, mask, true,
+				CONFIG_SYS_HZ, false);
 	if (ret)
 		return ret;
 
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index d47c996..71202d7 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -55,18 +55,18 @@
 		setbits_le32(regs + RCAR_USB3_DL_CTRL,
 			     RCAR_USB3_DL_CTRL_FW_SET_DATA0);
 
-		ret = wait_for_bit("xhci-rcar", regs + RCAR_USB3_DL_CTRL,
-				   RCAR_USB3_DL_CTRL_FW_SET_DATA0, false,
-				   10, false);
+		ret = wait_for_bit_le32(regs + RCAR_USB3_DL_CTRL,
+					RCAR_USB3_DL_CTRL_FW_SET_DATA0, false,
+					10, false);
 		if (ret)
 			break;
 	}
 
 	clrbits_le32(regs + RCAR_USB3_DL_CTRL, RCAR_USB3_DL_CTRL_ENABLE);
 
-	ret = wait_for_bit("xhci-rcar", regs + RCAR_USB3_DL_CTRL,
-			   RCAR_USB3_DL_CTRL_FW_SUCCESS, true,
-			   10, false);
+	ret = wait_for_bit_le32(regs + RCAR_USB3_DL_CTRL,
+				RCAR_USB3_DL_CTRL_FW_SUCCESS, true,
+				10, false);
 
 	return ret;
 }