mpc83xx: Introduce ARCH_MPC831*
Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 142b924..20780ba 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -17,6 +17,7 @@
config TARGET_VE8313
bool "Support ve8313"
+ select ARCH_MPC8313
config TARGET_VME8349
bool "Support vme8349"
@@ -28,11 +29,13 @@
config TARGET_MPC8313ERDB
bool "Support MPC8313ERDB"
+ select ARCH_MPC8313
select BOARD_EARLY_INIT_F
select SUPPORT_SPL
config TARGET_MPC8315ERDB
bool "Support MPC8315ERDB"
+ select ARCH_MPC8315
select BOARD_EARLY_INIT_F
config TARGET_MPC8323ERDB
@@ -65,6 +68,7 @@
config TARGET_IDS8313
bool "Support ids8313"
+ select ARCH_MPC8313
select DM
imply CMD_DM
@@ -113,6 +117,17 @@
bool
select ARCH_MPC830X
+config ARCH_MPC831X
+ bool
+
+config ARCH_MPC8313
+ bool
+ select ARCH_MPC831X
+
+config ARCH_MPC8315
+ bool
+ select ARCH_MPC831X
+
source "board/esd/vme8349/Kconfig"
source "board/freescale/mpc8308rdb/Kconfig"
source "board/freescale/mpc8313erdb/Kconfig"
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index b29f271..8a88068 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -18,7 +18,7 @@
#include <tsec.h>
#include <netdev.h>
#include <fsl_esdhc.h>
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_MPC831x)
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_ARCH_MPC831X)
#include <linux/immap_qe.h>
#include <asm/io.h>
#endif
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index 1555205..7d8d551 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -240,7 +240,7 @@
/* System General Purpose Register */
#ifdef CONFIG_SYS_SICRH
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
+#if defined(CONFIG_MPC834x) || defined(CONFIG_ARCH_MPC8313)
/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
__raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
&im->sysconf.sicrh);
@@ -312,7 +312,7 @@
im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
#endif
-#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_MPC831x)
+#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_ARCH_MPC831X)
uint32_t temp;
struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c
index 0ecafd7..cfd391b 100644
--- a/arch/powerpc/cpu/mpc83xx/fdt.c
+++ b/arch/powerpc/cpu/mpc83xx/fdt.c
@@ -16,7 +16,7 @@
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
- (defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
+ (defined(CONFIG_QE) && !defined(CONFIG_ARCH_MPC831X))
#include <linux/immap_qe.h>
void fdt_fixup_muram (void *blob)
@@ -52,7 +52,7 @@
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
-#ifdef CONFIG_MPC8313
+#ifdef CONFIG_ARCH_MPC8313
/*
* mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
* h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
@@ -123,7 +123,7 @@
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
- (defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
+ (defined(CONFIG_QE) && !defined(CONFIG_ARCH_MPC831X))
fdt_fixup_muram (blob);
#endif
}
diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
index 97ef771..3f18aad 100644
--- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c
+++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
@@ -31,7 +31,7 @@
printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
>> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X)
if ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) == SDRAM_CFG_DBW_16)
puts(", 16-bit");
else if ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) == SDRAM_CFG_DBW_32)
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index d537af5..9f09d29 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -85,7 +85,7 @@
u32 lcrr;
u32 csb_clk;
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
u32 tsec1_clk;
u32 tsec2_clk;
@@ -101,7 +101,7 @@
#if !defined(CONFIG_MPC832x)
u32 i2c2_clk;
#endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
u32 tdm_clk;
#endif
#if defined(CONFIG_FSL_ESDHC)
@@ -122,12 +122,12 @@
u32 qe_clk;
u32 brg_clk;
#endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC837x)
u32 pciexp1_clk;
u32 pciexp2_clk;
#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_MPC837x) || defined(CONFIG_ARCH_MPC8315)
u32 sata_clk;
#endif
@@ -155,7 +155,7 @@
sccr = im->clk.sccr;
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
@@ -176,7 +176,7 @@
}
#endif
-#if defined(CONFIG_ARCH_MPC830X) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC830X) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
case 0:
@@ -197,7 +197,7 @@
}
#endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC8315) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
@@ -216,7 +216,7 @@
/* unknown SCCR_TSEC2CM value */
return -4;
}
-#elif defined(CONFIG_MPC8313)
+#elif defined(CONFIG_ARCH_MPC8313)
tsec2_clk = tsec1_clk;
if (!(sccr & SCCR_TSEC1ON))
@@ -291,7 +291,7 @@
return -8;
}
#endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
case 0:
tdm_clk = 0;
@@ -317,7 +317,7 @@
i2c1_clk = csb_clk;
#elif defined(CONFIG_MPC832x)
i2c1_clk = enc_clk;
-#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x)
+#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X)
i2c1_clk = enc_clk;
#elif defined(CONFIG_FSL_ESDHC)
i2c1_clk = sdhc_clk;
@@ -330,7 +330,7 @@
i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
#endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC837x)
switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
case 0:
@@ -369,7 +369,7 @@
}
#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_MPC837x) || defined(CONFIG_ARCH_MPC8315)
switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
case 0:
sata_clk = 0;
@@ -448,7 +448,7 @@
#endif
gd->arch.csb_clk = csb_clk;
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
gd->arch.tsec1_clk = tsec1_clk;
gd->arch.tsec2_clk = tsec2_clk;
@@ -459,7 +459,7 @@
#if defined(CONFIG_MPC834x)
gd->arch.usbmph_clk = usbmph_clk;
#endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
gd->arch.tdm_clk = tdm_clk;
#endif
#if defined(CONFIG_FSL_ESDHC)
@@ -483,12 +483,12 @@
gd->arch.qe_clk = qe_clk;
gd->arch.brg_clk = brg_clk;
#endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC837x)
gd->arch.pciexp1_clk = pciexp1_clk;
gd->arch.pciexp2_clk = pciexp2_clk;
#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_MPC837x) || defined(CONFIG_ARCH_MPC8315)
gd->arch.sata_clk = sata_clk;
#endif
gd->pci_clk = pci_sync_in;
@@ -550,7 +550,7 @@
printf(" I2C2: %-4s MHz\n",
strmhz(buf, gd->arch.i2c2_clk));
#endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
printf(" TDM: %-4s MHz\n",
strmhz(buf, gd->arch.tdm_clk));
#endif
@@ -558,7 +558,7 @@
printf(" SDHC: %-4s MHz\n",
strmhz(buf, gd->arch.sdhc_clk));
#endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
printf(" TSEC1: %-4s MHz\n",
strmhz(buf, gd->arch.tsec1_clk));
@@ -574,14 +574,14 @@
printf(" USB MPH: %-4s MHz\n",
strmhz(buf, gd->arch.usbmph_clk));
#endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC837x)
printf(" PCIEXP1: %-4s MHz\n",
strmhz(buf, gd->arch.pciexp1_clk));
printf(" PCIEXP2: %-4s MHz\n",
strmhz(buf, gd->arch.pciexp2_clk));
#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_MPC837x) || defined(CONFIG_ARCH_MPC8315)
printf(" SATA: %-4s MHz\n",
strmhz(buf, gd->arch.sata_clk));
#endif
diff --git a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h
index 4e5a352..74ba91a 100644
--- a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h
+++ b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h
@@ -6,8 +6,8 @@
/*
* The MCP83xx's 1-2 GPIO controllers each with 32 bits.
*/
-#if defined(CONFIG_MPC8313) || defined(CONFIG_ARCH_MPC8308) || \
- defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8313) || defined(CONFIG_ARCH_MPC8308) || \
+ defined(CONFIG_ARCH_MPC8315)
#define MPC83XX_GPIO_CTRLRS 1
#elif defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
#define MPC83XX_GPIO_CTRLRS 2
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 700e2be..0c3a4ad 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -35,7 +35,7 @@
#else
/* There are other clocks in the MPC83XX */
u32 csb_clk;
-# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
u32 tsec1_clk;
u32 tsec2_clk;
@@ -46,19 +46,19 @@
# if defined(CONFIG_MPC834x)
u32 usbmph_clk;
# endif /* CONFIG_MPC834x */
-# if defined(CONFIG_MPC8315)
+# if defined(CONFIG_ARCH_MPC8315)
u32 tdm_clk;
# endif
u32 core_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
-# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_MPC837x)
u32 pciexp1_clk;
u32 pciexp2_clk;
# endif
-# if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+# if defined(CONFIG_MPC837x) || defined(CONFIG_ARCH_MPC8315)
u32 sata_clk;
# endif
# if defined(CONFIG_MPC8360)
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index b10feb5..d22d887 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -679,7 +679,7 @@
#define CONFIG_SYS_MPC83xx_USB2_OFFSET 0x23000
#endif
-#elif defined(CONFIG_MPC8313)
+#elif defined(CONFIG_ARCH_MPC8313)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
@@ -714,7 +714,7 @@
u8 res7[0xC0000];
} immap_t;
-#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC8315)
+#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
diff --git a/arch/powerpc/include/asm/mpc8xxx_spi.h b/arch/powerpc/include/asm/mpc8xxx_spi.h
index 518d0c3..3edd561 100644
--- a/arch/powerpc/include/asm/mpc8xxx_spi.h
+++ b/arch/powerpc/include/asm/mpc8xxx_spi.h
@@ -11,8 +11,8 @@
#include <asm/types.h>
#if defined(CONFIG_ARCH_MPC8308) || \
- defined(CONFIG_MPC8313) || \
- defined(CONFIG_MPC8315) || \
+ defined(CONFIG_ARCH_MPC8313) || \
+ defined(CONFIG_ARCH_MPC8315) || \
defined(CONFIG_MPC834x) || \
defined(CONFIG_MPC837x)