corvus DTS / DM support
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[rebase on current ToT, don't delete gurnard DTB creation]
Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index de75e24..5338a39 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -2,7 +2,9 @@
# SPDX-License-Identifier: GPL-2.0+
#
-dtb-$(CONFIG_AT91FAMILY) += at91sam9g45-gurnard.dtb
+dtb-$(CONFIG_AT91FAMILY) += at91sam9g45-corvus.dtb \
+ at91sam9g45-gurnard.dtb
+
dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
diff --git a/arch/arm/dts/at91sam9g45-corvus.dts b/arch/arm/dts/at91sam9g45-corvus.dts
new file mode 100644
index 0000000..c207c02
--- /dev/null
+++ b/arch/arm/dts/at91sam9g45-corvus.dts
@@ -0,0 +1,108 @@
+/*
+ * at91sam9g45-corvus.dts Device Tree file fir Siemens corvus board
+ * (C) Copyright 2016 Heiko Schocher <hs@denx.de>
+ *
+ * based on:
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+
+/ {
+ model = "Siemens corvus";
+ compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+ chosen {
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x70000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ usart1: serial@fff90000 {
+ pinctrl-0 =
+ <&pinctrl_usart1
+ &pinctrl_usart1_rts
+ &pinctrl_usart1_cts>;
+ status = "okay";
+ };
+
+ macb0: ethernet@fffbc000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+
+ spi0: spi@fffa4000{
+ status = "okay";
+ cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <13000000>;
+ reg = <0>;
+ };
+ };
+
+ usb2: gadget@fff78000 {
+ atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ rtc@fffffd20 {
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+ status = "okay";
+ };
+
+ gpbr: syscon@fffffd60 {
+ status = "okay";
+ };
+
+ rtc@fffffdb0 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+ };
+
+ usb0: ohci@00700000 {
+ status = "okay";
+ num-ports = <2>;
+ atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
+ &pioD 3 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1: ehci@00800000 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 6180699..0ff0d1d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -122,6 +122,10 @@
bool "Support corvus"
select CPU_ARM926EJS
select SUPPORT_SPL
+ select DM
+ select DM_SERIAL
+ select DM_GPIO
+ select DM_ETH
config TARGET_TAURUS
bool "Support taurus"