Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
All of the PCI/PCI-Express driver and initialization code that
was in the MPC8641HPCN port has now been moved into the common
drivers/fsl_pci_init.c. In a subsequent patch, this will be
utilized by the 85xx ports as well.
Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
Also enable the second PCI-Express controller on 8641
by getting its BATS and CFG_ setup right.
Fixed a u16 vendor compiler warning in AHCI driver too.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
diff --git a/drivers/fsl_pci_init.c b/drivers/fsl_pci_init.c
new file mode 100644
index 0000000..1d1f6df
--- /dev/null
+++ b/drivers/fsl_pci_init.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define DEBUG
+#include <common.h>
+
+#ifdef CONFIG_FSL_PCI_INIT
+
+/*
+ * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
+ *
+ * Initialize controller and call the common driver/pci pci_hose_scan to
+ * scan for bridges and devices.
+ *
+ * Hose fields which need to be pre-initialized by board specific code:
+ * regions[]
+ * first_busno
+ *
+ * Fields updated:
+ * last_busno
+ */
+
+#include <pci.h>
+#include <asm/immap_fsl_pci.h>
+
+void pciauto_prescan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus);
+void pciauto_postscan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus);
+
+void pciauto_config_init(struct pci_controller *hose);
+void
+fsl_pci_init(struct pci_controller *hose)
+{
+ u16 temp16;
+ u32 temp32;
+ int busno = hose->first_busno;
+ int enabled;
+ u16 ltssm;
+ u8 temp8;
+ int r;
+ int bridge;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr;
+ pci_dev_t dev = PCI_BDF(busno,0,0);
+
+ /* Initialize ATMU registers based on hose regions and flags */
+ volatile pot_t *po=&pci->pot[1]; /* skip 0 */
+ volatile pit_t *pi=&pci->pit[0]; /* ranges from: 3 to 1 */
+
+#ifdef DEBUG
+ int neg_link_w;
+#endif
+
+ for (r=0; r<hose->region_count; r++) {
+ if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */
+ pi->pitar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
+ pi->piwbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
+ pi->piwbear = 0;
+ pi->piwar = PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP |
+ (__ilog2(hose->regions[r].size) - 1);
+ pi++;
+ } else { /* Outbound */
+ po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
+ po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
+ po->potear = 0;
+ if (hose->regions[r].flags & PCI_REGION_IO)
+ po->powar = POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE |
+ (__ilog2(hose->regions[r].size) - 1);
+ else
+ po->powar = POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE |
+ (__ilog2(hose->regions[r].size) - 1);
+ po++;
+ }
+ }
+
+ pci_register_hose(hose);
+ pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */
+ hose->current_busno = hose->first_busno;
+
+ pci->pedr = 0xffffffff; /* Clear any errors */
+ pci->peer = 0xffffffff; /* Enable Error Interupts */
+ pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32);
+ temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */
+ pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32);
+
+ pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8);
+ bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */
+
+ if ( bridge ) {
+
+ pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm);
+ enabled = ltssm >= PCI_LTSSM_L0;
+
+ if (!enabled) {
+ debug("....PCIE link error. Skipping scan."
+ "LTSSM=0x%02x\n", temp16);
+ hose->last_busno = hose->first_busno;
+ return;
+ }
+
+ pci->pme_msg_det = 0xffffffff;
+ pci->pme_msg_int_en = 0xffffffff;
+#ifdef DEBUG
+ pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16);
+ neg_link_w = (temp16 & 0x3f0 ) >> 4;
+ debug("...PCIE LTSSM=0x%x, Negotiated link width=%d\n",
+ ltssm, neg_link_w);
+#endif
+ hose->current_busno++; /* Start scan with secondary */
+ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
+
+ } else {
+#if 0
+/* done in pci_hose_config_device() */
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
+ temp16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, temp16);
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+#endif
+ }
+
+ /* Call setup to allocate PCSRBAR window */
+ pciauto_setup_device(hose, dev, 1, hose->pci_mem,
+ hose->pci_prefetch, hose->pci_io);
+
+ printf (" Scanning PCI bus %02x\n", hose->current_busno);
+ hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno);
+
+ if ( bridge ) { /* update limit regs and subordinate busno */
+ pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
+ }
+
+ /* Clear all error indications */
+
+ if (pci->pme_msg_det && pci->pme_msg_det != 0xffffffff) {
+ debug("pci_fsl_init: pme_msg_det@%x=%x. Clearing\n",
+ &pci->pme_msg_det, pci->pme_msg_det);
+ pci->pme_msg_det = 0xffffffff;
+ }
+
+ if (pci->pedr) {
+ debug("pci_fsl_init: pedr@%x=%x. Clearing\n",
+ &pci->pedr, pci->pedr);
+ pci->pedr = 0xffffffff;
+ }
+
+ pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16);
+ if (temp16) {
+ debug("pci_fsl_init: PCI_DSR@%x=%x. Clearing\n",
+ PCI_DSR, temp16);
+ pci_hose_write_config_word(hose, dev,
+ PCI_DSR, 0xffff);
+ }
+
+ pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
+ if (temp16) {
+ debug("pci_fsl_init: PCI_SEC_STATUS@%x=%x. Clearing\n",
+ PCI_SEC_STATUS, temp16);
+ pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
+ }
+}
+
+#endif /* CONFIG_FSL_PCI */