powerpc/mpc8536ds: Add eSPI support for MPC8536DS
1. The SD_DATA[4:7] signals are shared with the SPI chip selects on 8536DS,
so don't set MPC85xx_PMUXCR_SD_DATA that config eSDHC data bus-width
to 4-bit and enable SPI signals.
2. Add eSPI controller and SPI-FLASH definition.
Signed-off-by: Xie Xiaobo <r63061@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index fb5ef91..a29fe35 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1934,7 +1934,12 @@
u8 res1[8];
u32 gpporcr; /* General-purpose POR configuration */
u8 res2[12];
+#if defined(CONFIG_MPC8536)
+ u32 gencfgr; /* General Configuration Register */
+#define MPC85xx_GENCFGR_SDHC_WP_INV 0x20000000
+#else
u32 gpiocr; /* GPIO control */
+#endif
u8 res3[12];
#if defined(CONFIG_MPC8569)
u32 plppar1; /* Platform port pin assignment 1 */
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index b292e13..2beea34 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2010, 2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -49,10 +49,8 @@
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
setbits_be32(&gur->pmuxcr,
- (MPC85xx_PMUXCR_SD_DATA |
- MPC85xx_PMUXCR_SDHC_CD |
+ (MPC85xx_PMUXCR_SDHC_CD |
MPC85xx_PMUXCR_SDHC_WP));
-
#endif
return 0;
}
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 3efe937..36e25f6 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -77,6 +77,7 @@
#define CONFIG_MPC8536DS 1
#define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */
+#define CONFIG_SPI_FLASH 1 /* Has SPI Flash */
#define CONFIG_PCI 1 /* Enable PCI/PCIE */
#define CONFIG_PCI1 1 /* Enable PCI controller 1 */
#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
@@ -458,6 +459,19 @@
#define CONFIG_SYS_EEPROM_BUS_NUM 1
/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_HARD_SPI
+#define CONFIG_FSL_ESPI
+
+#if defined(CONFIG_SPI_FLASH)
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED 10000000
+#define CONFIG_SF_DEFAULT_MODE 0
+#endif
+
+/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/