diff --git a/board/ronetix/pm9261/Makefile b/board/ronetix/pm9261/Makefile
index 3860283..90835d3 100644
--- a/board/ronetix/pm9261/Makefile
+++ b/board/ronetix/pm9261/Makefile
@@ -11,5 +11,5 @@
 #
 
 obj-y += pm9261.o
-obj-y += led.o
+obj-$(CONFIG_RED_LED) += led.o
 obj-$(CONFIG_HAS_DATAFLASH) += partition.o
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index 160f8f8..f338ff8 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -21,7 +21,6 @@
 
 #include <lcd.h>
 #include <atmel_lcdc.h>
-#include <dataflash.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
 #include <net.h>
 #endif
@@ -178,7 +177,7 @@
 
 void lcd_show_board_info(void)
 {
-	ulong dram_size, nand_size, flash_size, dataflash_size;
+	ulong dram_size, nand_size, flash_size;
 	int i;
 	char temp[32];
 
@@ -201,17 +200,11 @@
 	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
 		flash_size += flash_info[i].size;
 
-	dataflash_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++)
-		dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number *
-				dataflash_info[i].Device.pages_size;
-
 	lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n"
 			"%ld MB DataFlash\n",
 		dram_size >> 20,
 		nand_size >> 20,
-		flash_size >> 20,
-		dataflash_size >> 20);
+		flash_size >> 20);
 }
 #endif /* CONFIG_LCD_INFO */
 
@@ -219,11 +212,6 @@
 
 int board_early_init_f(void)
 {
-	at91_periph_clk_enable(ATMEL_ID_PIOA);
-	at91_periph_clk_enable(ATMEL_ID_PIOC);
-
-	at91_seriald_hw_init();
-
 	return 0;
 }
 
@@ -238,9 +226,6 @@
 #ifdef CONFIG_CMD_NAND
 	pm9261_nand_hw_init();
 #endif
-#ifdef CONFIG_HAS_DATAFLASH
-	at91_spi0_hw_init(1 << 0);
-#endif
 #ifdef CONFIG_DRIVER_DM9000
 	pm9261_dm9000_hw_init();
 #endif
diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig
index 1922673..a2cbb4c 100644
--- a/configs/pm9261_defconfig
+++ b/configs/pm9261_defconfig
@@ -1,6 +1,8 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_TARGET_PM9261=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261"
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_BOOTDELAY=3
@@ -14,14 +16,31 @@
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index b9c93b0..c4d3d96 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -141,10 +141,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_AT91_GPIO	1
-#define CONFIG_ATMEL_USART	1
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define	CONFIG_USART_ID			ATMEL_ID_SYS
 
 /* LCD */
 #define LCD_BPP				LCD_COLOR8
@@ -155,13 +151,6 @@
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_BGR555		1
 
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED		GPIO_PIN_PC(12)
-#define CONFIG_GREEN_LED	GPIO_PIN_PC(13)
-#define CONFIG_YELLOW_LED	GPIO_PIN_PC(15)
-
-
 /*
  * BOOTP options
  */
@@ -175,16 +164,6 @@
 #define PHYS_SDRAM				0x20000000
 #define PHYS_SDRAM_SIZE				0x04000000	/* 64 megs */
 
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
-#define AT91_SPI_CLK				15000000
-#define DATAFLASH_TCSS				(0x1a << 16)
-#define DATAFLASH_TCHS				(0x1 << 24)
-
 /* NAND flash */
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
@@ -235,13 +214,13 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_SYS_MONITOR_BASE		\
-		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 #define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_ADDR		\
-		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
 #define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_ENV_SECT_SIZE	0x210
+#define CONFIG_ENV_SPI_MAX_HZ	15000000
+#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
+				"sf read 0x22000000 0x84000 0x210000; " \
+				"bootm 0x22000000"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
 				"mtdparts=atmel_nand:-(root) "		\
@@ -324,7 +303,7 @@
 		ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
 
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
 				GENERATED_GBL_DATA_SIZE)
 
 #endif