arm64: mvebu: Fix A8K memory mapping and add documentation
Fix the MMU mapping for A8K device family:
- Separate A7K and A8K memory mappings
- Fix memory regions by including IO mapping for all
3 PCIe interfaces existing on each connected CP110 controller
Add A8K memory mapping documentation with all regions
configured by Marvell ATF.
Change-Id: I9c930569b1853900f5fba2d5db319b092cc7a2a6
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
diff --git a/arch/arm/mach-mvebu/armada8k/cpu.c b/arch/arm/mach-mvebu/armada8k/cpu.c
index 2719d68..2325e9a 100644
--- a/arch/arm/mach-mvebu/armada8k/cpu.c
+++ b/arch/arm/mach-mvebu/armada8k/cpu.c
@@ -21,7 +21,33 @@
#define RFU_GLOBAL_SW_RST (MVEBU_RFU_BASE + 0x84)
#define RFU_SW_RESET_OFFSET 0
+/*
+ * The following table includes all memory regions for Armada 7k and
+ * 8k SoCs. The Armada 7k is missing the CP110 slave regions here. Lets
+ * define these regions at the beginning of the struct so that they
+ * can be easier removed later dynamically if an Armada 7k device is detected.
+ * For a detailed memory map, please see doc/mvebu/armada-8k-memory.txt
+ */
+#define ARMADA_7K8K_COMMON_REGIONS_START 2
static struct mm_region mvebu_mem_map[] = {
+ /* Armada 80x0 memory regions include the CP1 (slave) units */
+ {
+ /* SRAM, MMIO regions - CP110 slave region */
+ .phys = 0xf4000000UL,
+ .virt = 0xf4000000UL,
+ .size = 0x02000000UL, /* 32MiB internal registers */
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ },
+ {
+ /* PCI CP1 regions */
+ .phys = 0xfa000000UL,
+ .virt = 0xfa000000UL,
+ .size = 0x04000000UL, /* 64MiB CP110 slave PCI space */
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ },
+ /* Armada 80x0 and 70x0 common memory regions start here */
{
/* RAM */
.phys = 0x0UL,
@@ -47,29 +73,35 @@
PTE_BLOCK_NON_SHARE
},
{
- /* SRAM, MMIO regions - CP110 slave region */
- .phys = 0xf4000000UL,
- .virt = 0xf4000000UL,
- .size = 0x02000000UL, /* 32MiB internal registers */
+ /* PCI CP0 regions */
+ .phys = 0xf6000000UL,
+ .virt = 0xf6000000UL,
+ .size = 0x04000000UL, /* 64MiB CP110 master PCI space */
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE
},
{
- /* PCI regions */
- .phys = 0xf8000000UL,
- .virt = 0xf8000000UL,
- .size = 0x08000000UL, /* 128MiB PCI space (master & slave) */
- .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
- PTE_BLOCK_NON_SHARE
- },
- {
- /* List terminator */
0,
}
};
struct mm_region *mem_map = mvebu_mem_map;
+void enable_caches(void)
+{
+ /*
+ * Armada 7k is not equipped with the CP110 slave CP. In case this
+ * code runs on an Armada 7k device, lets remove the CP110 slave
+ * entries from the memory mapping by moving the start to the
+ * common regions.
+ */
+ if (of_machine_is_compatible("marvell,armada7040"))
+ mem_map = &mvebu_mem_map[ARMADA_7K8K_COMMON_REGIONS_START];
+
+ icache_enable();
+ dcache_enable();
+}
+
void reset_cpu(ulong ignored)
{
u32 reg;