omap4: fix IO setting
The value from TRIM is not working for some 4430 silicons.
So, override with hw team recommended value. However, for
4460 TRIM value shall be used as long as the part is trimmed
This fixes boot problem on some OMAP4430 ES2.0 Panda boards
out there.
Cc: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Aneesh V <aneesh@ti.com>
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index cd1451a..37a86b4 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -105,7 +105,12 @@
&ctrl->control_ldosram_core_voltage_ctrl);
}
- if (!readl(&ctrl->control_efuse_1))
+ /*
+ * Over-ride the register
+ * i. unconditionally for all 4430
+ * ii. only if un-trimmed for 4460
+ */
+ if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_1))
writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
if (!readl(&ctrl->control_efuse_2))