| #include <common.h> |
| #include <netdev.h> |
| #include <miiphy.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/gpio.h> |
| |
| int sunxi_gmac_initialize(bd_t *bis) |
| { |
| int pin; |
| struct sunxi_ccm_reg *const ccm = |
| (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| |
| /* Set up clock gating */ |
| #ifndef CONFIG_MACH_SUN6I |
| setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC); |
| #else |
| setbits_le32(&ccm->ahb_reset0_cfg, 0x1 << AHB_RESET_OFFSET_GMAC); |
| setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_GMAC); |
| #endif |
| |
| /* Set MII clock */ |
| #ifdef CONFIG_RGMII |
| setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | |
| CCM_GMAC_CTRL_GPIT_RGMII); |
| setbits_le32(&ccm->gmac_clk_cfg, |
| CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY)); |
| #else |
| setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII | |
| CCM_GMAC_CTRL_GPIT_MII); |
| #endif |
| |
| #ifndef CONFIG_MACH_SUN6I |
| /* Configure pin mux settings for GMAC */ |
| for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { |
| #ifdef CONFIG_RGMII |
| /* skip unused pins in RGMII mode */ |
| if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) |
| continue; |
| #endif |
| sunxi_gpio_set_cfgpin(pin, SUN7I_GPA_GMAC); |
| sunxi_gpio_set_drv(pin, 3); |
| } |
| #elif defined CONFIG_RGMII |
| /* Configure sun6i RGMII mode pin mux settings */ |
| for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++) { |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| sunxi_gpio_set_drv(pin, 3); |
| } |
| for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) { |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| sunxi_gpio_set_drv(pin, 3); |
| } |
| for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(20); pin++) { |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| sunxi_gpio_set_drv(pin, 3); |
| } |
| for (pin = SUNXI_GPA(25); pin <= SUNXI_GPA(27); pin++) { |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| sunxi_gpio_set_drv(pin, 3); |
| } |
| #elif defined CONFIG_GMII |
| /* Configure sun6i GMII mode pin mux settings */ |
| for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(27); pin++) { |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| sunxi_gpio_set_drv(pin, 2); |
| } |
| #else |
| /* Configure sun6i MII mode pin mux settings */ |
| for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++) |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| for (pin = SUNXI_GPA(8); pin <= SUNXI_GPA(9); pin++) |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| for (pin = SUNXI_GPA(11); pin <= SUNXI_GPA(14); pin++) |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(24); pin++) |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++) |
| sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC); |
| #endif |
| |
| #ifdef CONFIG_RGMII |
| return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII); |
| #elif defined CONFIG_GMII |
| return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_GMII); |
| #else |
| return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII); |
| #endif |
| } |