Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_NAND_5_ADDR_CYCLE
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 4e90af6..dc85a84 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -57,6 +57,7 @@
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
+# CONFIG_SYS_NAND_5_ADDR_CYCLE is not set
CONFIG_PHYLIB=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=31
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index dab392e..0c536c9 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -425,6 +425,15 @@
if SPL
+config SYS_NAND_5_ADDR_CYCLE
+ bool "Wait 5 address cycles during NAND commands"
+ depends on SPL_NAND_AM33XX_BCH || SPL_NAND_SIMPLE || \
+ (SPL_NAND_SUPPORT && NAND_ATMEL)
+ default y
+ help
+ Some controllers require waiting for 5 address cycles when issuing
+ some commands, on NAND chips larger than 128MiB.
+
choice
prompt "NAND bad block marker/indicator positon in the OOB"
depends on SPL_NAND_AM33XX_BCH || SPL_NAND_DENALI || SPL_NAND_SIMPLE || \
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index a8ee559..ec34992 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -180,7 +180,6 @@
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h
index 087b2d0..43b8363 100644
--- a/include/configs/am335x_guardian.h
+++ b/include/configs/am335x_guardian.h
@@ -106,9 +106,6 @@
#define CONFIG_SYS_BOOTCOUNT_LE
#ifdef CONFIG_MTD_RAW_NAND
-
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index 71ecd55..ed2685d 100644
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -106,7 +106,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION 1
/* NAND config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index e36cf25..1ce0c47 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -19,7 +19,6 @@
/* Board NAND Info. */
#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, \
11, 12, 13, 14, 16, 17, 18, 19, 20, \
21, 22, 23, 24, 25, 26, 27, 28, 30, \
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index ea2b564..ad31e2e 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -157,7 +157,6 @@
/* NAND support */
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 7147103..6f75ca5 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -95,7 +95,6 @@
#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 2611f5b..48ec065 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -115,6 +115,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 08ce67a..798a100 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -98,6 +98,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 8c5d1e7..8ada88d 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -209,7 +209,6 @@
#ifndef CONFIG_NOR_BOOT
#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 2f499b3..1dfe7d0 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -146,7 +146,6 @@
#define CONFIG_SYS_NAND_BASE 0x8000000
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index 704b2e6..ed918a7 100644
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -123,7 +123,6 @@
#define CONFIG_SYS_BOOTCOUNT_BE
/* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 7cb56cb..685f226 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -85,7 +85,6 @@
/* Network. */
/* NAND support */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index f5521c5..c6cdcf1 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -23,7 +23,6 @@
/* NAND support */
#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 6509366..2984420 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -188,7 +188,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
#endif
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 027a1c3..de432a4 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -97,7 +97,6 @@
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 068e5f6..f7c5d40 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -121,7 +121,6 @@
#undef CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000
#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 89221a8..66c8cd2 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -133,7 +133,6 @@
/* Defines for SPL */
/* NAND boot config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
10, 11, 12, 13}
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 975e1cd..b5a2f6c 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -80,7 +80,6 @@
/* NAND support */
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h
index d69f2a0..45414f9 100644
--- a/include/configs/gardena-smart-gateway-at91sam.h
+++ b/include/configs/gardena-smart-gateway-at91sam.h
@@ -60,8 +60,6 @@
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS
#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 4b45e33..eb073b9 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -137,7 +137,6 @@
#ifdef CONFIG_NAND_MXS
# define CONFIG_SYS_MAX_NAND_DEVICE 1
# define CONFIG_SYS_NAND_BASE 0x40000000
-# define CONFIG_SYS_NAND_5_ADDR_CYCLE
# define CONFIG_SYS_NAND_ONFI_DETECTION
# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index e493703..520cc17 100644
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -129,7 +129,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index 5cd51a4..48b8a30 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -52,7 +52,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h
index 62b8de3..7d8b80e 100644
--- a/include/configs/mx6sxsabreauto.h
+++ b/include/configs/mx6sxsabreauto.h
@@ -106,7 +106,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 42b729b..83a94f4 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -111,7 +111,6 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 64f017a..b5c525d 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -114,7 +114,6 @@
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x60000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
/* OCOTP */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 7ba1902..30c6d2c 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -22,7 +22,6 @@
#if defined(CONFIG_MTD_RAW_NAND)
#define CONFIG_SYS_FLASH_BASE NAND_BASE
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 88590ef..8d1233c 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -27,7 +27,6 @@
#if defined(CONFIG_MTD_RAW_NAND)
#define CONFIG_SYS_FLASH_BASE NAND_BASE
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 8f3c7d1..ced449d 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -75,7 +75,6 @@
#define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
/* NAND config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 50ff5f8..0da7388 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -18,7 +18,6 @@
#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
13, 14, 16, 17, 18, 19, 20, 21, 22, \
23, 24, 25, 26, 27, 28, 30, 31, 32, \
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 056cf90..4227610 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -122,7 +122,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
diff --git a/include/configs/phycore_am335x_r2.h b/include/configs/phycore_am335x_r2.h
index 02d1245..e398a01 100644
--- a/include/configs/phycore_am335x_r2.h
+++ b/include/configs/phycore_am335x_r2.h
@@ -85,7 +85,6 @@
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 029a7cb..6f4bae3 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -85,7 +85,6 @@
#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 44fc164..198d8da 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -70,7 +70,6 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* Falcon boot support on raw MMC */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x100 /* 128 KiB */
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index b54e639..1bca98c 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -82,6 +82,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 4aba68e..652c4df 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -46,6 +46,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index 64113b4..4278e17 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -46,6 +46,5 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#endif
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 4d613c4..8fea607 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -73,7 +73,6 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 41881ea..cc5f538 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -166,7 +166,6 @@
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_SIZE (SZ_256M)
#define CONFIG_SYS_NAND_ECCSIZE 256
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 9176f1c..a4f1628 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -126,7 +126,6 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
/* NAND boot config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\
48, 49, 50, 51, 52, 53, 54, 55,\
56, 57, 58, 59, 60, 61, 62, 63}
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index fef55d85..fa4b6f4 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -168,7 +168,6 @@
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_SIZE (256 * SZ_1M)
#define CONFIG_SYS_NAND_ECCSIZE 256
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 74dc9fe..3124c78 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -57,7 +57,6 @@
/* NAND: SPL related configs */
/* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 8d0d9ca..42136a1 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -2359,7 +2359,6 @@
CONFIG_SYS_MXS_VDD5V_ONLY
CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
CONFIG_SYS_NAND_4_ADDR_CYCLE
-CONFIG_SYS_NAND_5_ADDR_CYCLE
CONFIG_SYS_NAND_ACTL_ALE
CONFIG_SYS_NAND_ACTL_CLE
CONFIG_SYS_NAND_ACTL_DELAY