musb-new: Use time based timeouts rather then cpu-cycles based timeouts
CPU cycle based timeouts are no good, because how long they use depends on
CPU speed. Instead use time based timeouts, and wait one second for a
device connection to show up (per the USB spec), and wait USB_TIMEOUT_MS
for various urbs to complete.
This fixes "usb start" taking for ever when no device is plugged into the
otg port.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c
index 2676f09..f8a0346 100644
--- a/drivers/usb/musb-new/musb_uboot.c
+++ b/drivers/usb/musb-new/musb_uboot.c
@@ -57,13 +57,11 @@
return &urb;
}
-#define MUSB_HOST_TIMEOUT 0x3ffffff
-
static int submit_urb(struct usb_hcd *hcd, struct urb *urb)
{
struct musb *host = hcd->hcd_priv;
int ret;
- int timeout;
+ unsigned long timeout;
ret = musb_urb_enqueue(hcd, urb, 0);
if (ret < 0) {
@@ -71,12 +69,13 @@
return ret;
}
- timeout = MUSB_HOST_TIMEOUT;
+ timeout = get_timer(0) + USB_TIMEOUT_MS(urb->pipe);
do {
if (ctrlc())
return -EIO;
host->isr(0, host);
- } while ((urb->dev->status & USB_ST_NOT_PROC) && --timeout);
+ } while ((urb->dev->status & USB_ST_NOT_PROC) &&
+ get_timer(0) < timeout);
return urb->status;
}
@@ -115,7 +114,8 @@
{
u8 power;
void *mbase;
- int timeout = MUSB_HOST_TIMEOUT;
+ /* USB spec says it may take up to 1 second for a device to connect */
+ unsigned long timeout = get_timer(0) + 1000;
if (!host) {
printf("MUSB host is not registered\n");
@@ -127,8 +127,8 @@
do {
if (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_HM)
break;
- } while (--timeout);
- if (!timeout)
+ } while (get_timer(0) < timeout);
+ if (get_timer(0) >= timeout)
return -ENODEV;
power = musb_readb(mbase, MUSB_POWER);