drivers/i2c/i2c_core.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2009 Sergey Kubushyn <ksi@koi8.net>
  *
  * (C) Copyright 2012
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * Multibus/multiadapter I2C core functions (wrappers)
  */
 #include <config.h>
 #include <i2c.h>
 #include <linker_lists.h>
 #include <asm/global_data.h>

 struct i2c_adapter *i2c_get_adapter(int index)
 {
 	struct i2c_adapter *i2c_adap_p = ll_entry_start(struct i2c_adapter,
 						i2c);
 	int max = ll_entry_count(struct i2c_adapter, i2c);
 	int i;

 	if (index >= max) {
 		printf("Error, wrong i2c adapter %d max %d possible\n",
 		       index, max);
 		return i2c_adap_p;
 	}
 	if (index == 0)
 		return i2c_adap_p;

 	for (i = 0; i < index; i++)
 		i2c_adap_p++;

 	return i2c_adap_p;
 }

 #if !defined(CFG_SYS_I2C_DIRECT_BUS)
 struct i2c_bus_hose i2c_bus[CFG_SYS_NUM_I2C_BUSES] =
 			CFG_SYS_I2C_BUSES;
 #endif

 DECLARE_GLOBAL_DATA_PTR;

 #ifndef CFG_SYS_I2C_DIRECT_BUS
 /*
  * i2c_mux_set()
  * -------------
  *
  * This turns on the given channel on I2C multiplexer chip connected to
  * a given I2C adapter directly or via other multiplexers. In the latter
  * case the entire multiplexer chain must be initialized first starting
  * with the one connected directly to the adapter. When disabling a chain
  * muxes must be programmed in reverse order, starting with the one
  * farthest from the adapter.
  *
  * mux_id is the multiplexer chip type from defined in i2c.h. So far only
  * NXP (Philips) PCA954x multiplexers are supported. Switches are NOT
  * supported (anybody uses them?)
  */

 static int i2c_mux_set(struct i2c_adapter *adap, int mux_id, int chip,
 			int channel)
 {
 	uint8_t	buf;
 	int ret;

 	/* channel < 0 - turn off the mux */
 	if (channel < 0) {
 		buf = 0;
 		ret = adap->write(adap, chip, 0, 0, &buf, 1);
 		if (ret)
 			printf("%s: Could not turn off the mux.\n", __func__);
 		return ret;
 	}

 	switch (mux_id) {
 	case I2C_MUX_PCA9540_ID:
 	case I2C_MUX_PCA9542_ID:
 		if (channel > 1)
 			return -1;
 		buf = (uint8_t)((channel & 0x01) | (1 << 2));
 		break;
 	case I2C_MUX_PCA9544_ID:
 		if (channel > 3)
 			return -1;
 		buf = (uint8_t)((channel & 0x03) | (1 << 2));
 		break;
 	case I2C_MUX_PCA9547_ID:
 		if (channel > 7)
 			return -1;
 		buf = (uint8_t)((channel & 0x07) | (1 << 3));
 		break;
 	case I2C_MUX_PCA9548_ID:
 		if (channel > 7)
 			return -1;
 		buf = (uint8_t)(0x01 << channel);
 		break;
 	default:
 		printf("%s: wrong mux id: %d\n", __func__, mux_id);
 		return -1;
 	}

 	ret = adap->write(adap, chip, 0, 0, &buf, 1);
 	if (ret)
 		printf("%s: could not set mux: id: %d chip: %x channel: %d\n",
 		       __func__, mux_id, chip, channel);
 	return ret;
 }

 static int i2c_mux_set_all(void)
 {
 	struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
 	int i;

 	return 0;
 }

 static int i2c_mux_disconnect_all(void)
 {
 	struct	i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
 	int	i;
 	uint8_t	buf = 0;

 	if (I2C_ADAP->init_done == 0)
 		return 0;

 	return 0;
 }
 #endif

 /*
  * i2c_init_bus():
  * ---------------
  *
  * Initializes one bus. Will initialize the parent adapter. No current bus
  * changes, no mux (if any) setup.
  */
 static void i2c_init_bus(unsigned int bus_no, int speed, int slaveaddr)
 {
 	if (bus_no >= CFG_SYS_NUM_I2C_BUSES)
 		return;

 	I2C_ADAP->init(I2C_ADAP, speed, slaveaddr);

 	if (gd->flags & GD_FLG_RELOC) {
 		I2C_ADAP->init_done = 1;
 		I2C_ADAP->speed = speed;
 		I2C_ADAP->slaveaddr = slaveaddr;
 	}
 }

 /* implement possible board specific board init */
 __weak void i2c_init_board(void)
 {
 }

 /*
  * i2c_init_all():
  *
  * not longer needed, will deleted. Actual init the SPD_BUS
  * for compatibility.
  * i2c_adap[] must be initialized beforehead with function pointers and
  * data, including speed and slaveaddr.
  */
 void i2c_init_all(void)
 {
 	i2c_init_board();
 	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
 	return;
 }

 /*
  * i2c_get_bus_num():
  * ------------------
  *
  *  Returns index of currently active I2C bus.  Zero-based.
  */
 unsigned int i2c_get_bus_num(void)
 {
 	return gd->cur_i2c_bus;
 }

 /*
  * i2c_set_bus_num():
  * ------------------
  *
  *  Change the active I2C bus. Subsequent read/write calls will
  *  go to this one. Sets all of the muxes in a proper condition
  *  if that bus is behind muxes.
  *  If previously selected bus is behind the muxes turns off all the
  *  muxes along the path to that bus.
  *
  *	bus - bus index, zero based
  *
  *	Returns: 0 on success, not 0 on failure
  */
 int i2c_set_bus_num(unsigned int bus)
 {
 	int max;

 	if ((bus == I2C_BUS) && (I2C_ADAP->init_done > 0))
 		return 0;

 #ifndef CFG_SYS_I2C_DIRECT_BUS
 	if (bus >= CFG_SYS_NUM_I2C_BUSES)
 		return -1;
 #endif

 	max = ll_entry_count(struct i2c_adapter, i2c);
 	if (I2C_ADAPTER(bus) >= max) {
 		printf("Error, wrong i2c adapter %d max %d possible\n",
 		       I2C_ADAPTER(bus), max);
 		return -2;
 	}

 #ifndef CFG_SYS_I2C_DIRECT_BUS
 	i2c_mux_disconnect_all();
 #endif

 	gd->cur_i2c_bus = bus;
 	if (I2C_ADAP->init_done == 0)
 		i2c_init_bus(bus, I2C_ADAP->speed, I2C_ADAP->slaveaddr);

 #ifndef CFG_SYS_I2C_DIRECT_BUS
 	i2c_mux_set_all();
 #endif
 	return 0;
 }

 /*
  * Probe the given I2C chip address.  Returns 0 if a chip responded,
  * not 0 on failure.
  */
 int i2c_probe(uint8_t chip)
 {
 	return I2C_ADAP->probe(I2C_ADAP, chip);
 }

 /*
  * Read/Write interface:
  *   chip:    I2C chip address, range 0..127
  *   addr:    Memory (register) address within the chip
  *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
  *              memories, 0 for register type devices with only one
  *              register)
  *   buffer:  Where to read/write the data
  *   len:     How many bytes to read/write
  *
  *   Returns: 0 on success, not 0 on failure
  */
 int i2c_read(uint8_t chip, unsigned int addr, int alen,
 				uint8_t *buffer, int len)
 {
 	return I2C_ADAP->read(I2C_ADAP, chip, addr, alen, buffer, len);
 }

 int i2c_write(uint8_t chip, unsigned int addr, int alen,
 				uint8_t *buffer, int len)
 {
 	return I2C_ADAP->write(I2C_ADAP, chip, addr, alen, buffer, len);
 }

 unsigned int i2c_set_bus_speed(unsigned int speed)
 {
 	unsigned int ret;

 	if (I2C_ADAP->set_bus_speed == NULL)
 		return 0;
 	ret = I2C_ADAP->set_bus_speed(I2C_ADAP, speed);
 	if (gd->flags & GD_FLG_RELOC)
 		I2C_ADAP->speed = (ret == 0) ? speed : 0;

 	return ret;
 }

 unsigned int i2c_get_bus_speed(void)
 {
 	struct i2c_adapter *cur = I2C_ADAP;
 	return cur->speed;
 }

 uint8_t i2c_reg_read(uint8_t addr, uint8_t reg)
 {
 	uint8_t buf;

 	i2c_read(addr, reg, 1, &buf, 1);

 #ifdef DEBUG
 	printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
 	       __func__, i2c_get_bus_num(), addr, reg, buf);
 #endif

 	return buf;
 }

 void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val)
 {
 #ifdef DEBUG
 	printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
 	       __func__, i2c_get_bus_num(), addr, reg, val);
 #endif

 	i2c_write(addr, reg, 1, &val, 1);
 }

 __weak void i2c_init(int speed, int slaveaddr)
 {
 	i2c_init_bus(i2c_get_bus_num(), speed, slaveaddr);
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Copyright (C) 2009 Sergey Kubushyn <ksi@koi8.net>
	*
	* (C) Copyright 2012
	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	*
	* Multibus/multiadapter I2C core functions (wrappers)
	*/
	#include <config.h>
	#include <i2c.h>
	#include <linker_lists.h>
	#include <asm/global_data.h>

	struct i2c_adapter *i2c_get_adapter(int index)
	{
	struct i2c_adapter *i2c_adap_p = ll_entry_start(struct i2c_adapter,
	i2c);
	int max = ll_entry_count(struct i2c_adapter, i2c);
	int i;

	if (index >= max) {
	printf("Error, wrong i2c adapter %d max %d possible\n",
	index, max);
	return i2c_adap_p;
	}
	if (index == 0)
	return i2c_adap_p;

	for (i = 0; i < index; i++)
	i2c_adap_p++;

	return i2c_adap_p;
	}

	#if !defined(CFG_SYS_I2C_DIRECT_BUS)
	struct i2c_bus_hose i2c_bus[CFG_SYS_NUM_I2C_BUSES] =
	CFG_SYS_I2C_BUSES;
	#endif

	DECLARE_GLOBAL_DATA_PTR;

	#ifndef CFG_SYS_I2C_DIRECT_BUS
	/*
	* i2c_mux_set()
	* -------------
	*
	* This turns on the given channel on I2C multiplexer chip connected to
	* a given I2C adapter directly or via other multiplexers. In the latter
	* case the entire multiplexer chain must be initialized first starting
	* with the one connected directly to the adapter. When disabling a chain
	* muxes must be programmed in reverse order, starting with the one
	* farthest from the adapter.
	*
	* mux_id is the multiplexer chip type from defined in i2c.h. So far only
	* NXP (Philips) PCA954x multiplexers are supported. Switches are NOT
	* supported (anybody uses them?)
	*/

	static int i2c_mux_set(struct i2c_adapter *adap, int mux_id, int chip,
	int channel)
	{
	uint8_t buf;
	int ret;

	/* channel < 0 - turn off the mux */
	if (channel < 0) {
	buf = 0;
	ret = adap->write(adap, chip, 0, 0, &buf, 1);
	if (ret)
	printf("%s: Could not turn off the mux.\n", __func__);
	return ret;
	}

	switch (mux_id) {
	case I2C_MUX_PCA9540_ID:
	case I2C_MUX_PCA9542_ID:
	if (channel > 1)
	return -1;
	buf = (uint8_t)((channel & 0x01) \| (1 << 2));
	break;
	case I2C_MUX_PCA9544_ID:
	if (channel > 3)
	return -1;
	buf = (uint8_t)((channel & 0x03) \| (1 << 2));
	break;
	case I2C_MUX_PCA9547_ID:
	if (channel > 7)
	return -1;
	buf = (uint8_t)((channel & 0x07) \| (1 << 3));
	break;
	case I2C_MUX_PCA9548_ID:
	if (channel > 7)
	return -1;
	buf = (uint8_t)(0x01 << channel);
	break;
	default:
	printf("%s: wrong mux id: %d\n", __func__, mux_id);
	return -1;
	}

	ret = adap->write(adap, chip, 0, 0, &buf, 1);
	if (ret)
	printf("%s: could not set mux: id: %d chip: %x channel: %d\n",
	__func__, mux_id, chip, channel);
	return ret;
	}

	static int i2c_mux_set_all(void)
	{
	struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
	int i;

	return 0;
	}

	static int i2c_mux_disconnect_all(void)
	{
	struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
	int i;
	uint8_t buf = 0;

	if (I2C_ADAP->init_done == 0)
	return 0;

	return 0;
	}
	#endif

	/*
	* i2c_init_bus():
	* ---------------
	*
	* Initializes one bus. Will initialize the parent adapter. No current bus
	* changes, no mux (if any) setup.
	*/
	static void i2c_init_bus(unsigned int bus_no, int speed, int slaveaddr)
	{
	if (bus_no >= CFG_SYS_NUM_I2C_BUSES)
	return;

	I2C_ADAP->init(I2C_ADAP, speed, slaveaddr);

	if (gd->flags & GD_FLG_RELOC) {
	I2C_ADAP->init_done = 1;
	I2C_ADAP->speed = speed;
	I2C_ADAP->slaveaddr = slaveaddr;
	}
	}

	/* implement possible board specific board init */
	__weak void i2c_init_board(void)
	{
	}

	/*
	* i2c_init_all():
	*
	* not longer needed, will deleted. Actual init the SPD_BUS
	* for compatibility.
	* i2c_adap[] must be initialized beforehead with function pointers and
	* data, including speed and slaveaddr.
	*/
	void i2c_init_all(void)
	{
	i2c_init_board();
	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
	return;
	}

	/*
	* i2c_get_bus_num():
	* ------------------
	*
	* Returns index of currently active I2C bus. Zero-based.
	*/
	unsigned int i2c_get_bus_num(void)
	{
	return gd->cur_i2c_bus;
	}

	/*
	* i2c_set_bus_num():
	* ------------------
	*
	* Change the active I2C bus. Subsequent read/write calls will
	* go to this one. Sets all of the muxes in a proper condition
	* if that bus is behind muxes.
	* If previously selected bus is behind the muxes turns off all the
	* muxes along the path to that bus.
	*
	* bus - bus index, zero based
	*
	* Returns: 0 on success, not 0 on failure
	*/
	int i2c_set_bus_num(unsigned int bus)
	{
	int max;

	if ((bus == I2C_BUS) && (I2C_ADAP->init_done > 0))
	return 0;

	#ifndef CFG_SYS_I2C_DIRECT_BUS
	if (bus >= CFG_SYS_NUM_I2C_BUSES)
	return -1;
	#endif

	max = ll_entry_count(struct i2c_adapter, i2c);
	if (I2C_ADAPTER(bus) >= max) {
	printf("Error, wrong i2c adapter %d max %d possible\n",
	I2C_ADAPTER(bus), max);
	return -2;
	}

	#ifndef CFG_SYS_I2C_DIRECT_BUS
	i2c_mux_disconnect_all();
	#endif

	gd->cur_i2c_bus = bus;
	if (I2C_ADAP->init_done == 0)
	i2c_init_bus(bus, I2C_ADAP->speed, I2C_ADAP->slaveaddr);

	#ifndef CFG_SYS_I2C_DIRECT_BUS
	i2c_mux_set_all();
	#endif
	return 0;
	}

	/*
	* Probe the given I2C chip address. Returns 0 if a chip responded,
	* not 0 on failure.
	*/
	int i2c_probe(uint8_t chip)
	{
	return I2C_ADAP->probe(I2C_ADAP, chip);
	}

	/*
	* Read/Write interface:
	* chip: I2C chip address, range 0..127
	* addr: Memory (register) address within the chip
	* alen: Number of bytes to use for addr (typically 1, 2 for larger
	* memories, 0 for register type devices with only one
	* register)
	* buffer: Where to read/write the data
	* len: How many bytes to read/write
	*
	* Returns: 0 on success, not 0 on failure
	*/
	int i2c_read(uint8_t chip, unsigned int addr, int alen,
	uint8_t *buffer, int len)
	{
	return I2C_ADAP->read(I2C_ADAP, chip, addr, alen, buffer, len);
	}

	int i2c_write(uint8_t chip, unsigned int addr, int alen,
	uint8_t *buffer, int len)
	{
	return I2C_ADAP->write(I2C_ADAP, chip, addr, alen, buffer, len);
	}

	unsigned int i2c_set_bus_speed(unsigned int speed)
	{
	unsigned int ret;

	if (I2C_ADAP->set_bus_speed == NULL)
	return 0;
	ret = I2C_ADAP->set_bus_speed(I2C_ADAP, speed);
	if (gd->flags & GD_FLG_RELOC)
	I2C_ADAP->speed = (ret == 0) ? speed : 0;

	return ret;
	}

	unsigned int i2c_get_bus_speed(void)
	{
	struct i2c_adapter *cur = I2C_ADAP;
	return cur->speed;
	}

	uint8_t i2c_reg_read(uint8_t addr, uint8_t reg)
	{
	uint8_t buf;

	i2c_read(addr, reg, 1, &buf, 1);

	#ifdef DEBUG
	printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
	__func__, i2c_get_bus_num(), addr, reg, buf);
	#endif

	return buf;
	}

	void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val)
	{
	#ifdef DEBUG
	printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
	__func__, i2c_get_bus_num(), addr, reg, val);
	#endif

	i2c_write(addr, reg, 1, &val, 1);
	}

	__weak void i2c_init(int speed, int slaveaddr)
	{
	i2c_init_bus(i2c_get_bus_num(), speed, slaveaddr);
	}