sunxi: Add support for the I2C controller which is part of the PRCM
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
[hdegoede@redhat.com: Minor cleanups]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
applied with fixing 2 checkpatch warnings:
WARNING: please, no space before tabs
Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
index 4501884..1da5455 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -77,6 +77,16 @@
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ if (port == 5) {
+ if (state)
+ prcm_apb0_enable(
+ PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+ else
+ prcm_apb0_disable(
+ PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+ return 0;
+ }
+
/* set the apb clock gate for twi */
if (state)
setbits_le32(&ccm->apb2_gate,
diff --git a/arch/arm/cpu/armv7/sunxi/prcm.c b/arch/arm/cpu/armv7/sunxi/prcm.c
index 19b4938..e1d091f 100644
--- a/arch/arm/cpu/armv7/sunxi/prcm.c
+++ b/arch/arm/cpu/armv7/sunxi/prcm.c
@@ -33,3 +33,15 @@
/* deassert reset for module */
setbits_le32(&prcm->apb0_reset, flags);
}
+
+void prcm_apb0_disable(u32 flags)
+{
+ struct sunxi_prcm_reg *prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+ /* assert reset for module */
+ clrbits_le32(&prcm->apb0_reset, flags);
+
+ /* close the clock for module */
+ clrbits_le32(&prcm->apb0_gate, flags);
+}
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index 63b161a..0cdefdc 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -134,6 +134,7 @@
#define SUNXI_RTC_BASE 0x01f00000
#define SUNXI_PRCM_BASE 0x01f01400
#define SUN6I_CPUCFG_BASE 0x01f01c00
+#define SUNXI_R_TWI_BASE 0x01f02400
#define SUNXI_R_UART_BASE 0x01f02800
#define SUNXI_R_PIO_BASE 0x01f02c00
#define SUN6I_P2WI_BASE 0x01f03400
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index a2a9a38..649f6cd 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -199,6 +199,8 @@
#define SUN6I_GPL1_R_P2WI_SDA 3
#define SUN8I_GPL_R_RSB 2
+#define SUN8I_H3_GPL_R_TWI 2
+#define SUN8I_A23_GPL_R_TWI 3
#define SUN8I_GPL_R_UART 2
#define SUN9I_GPN_R_RSB 3
diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h
index 561cd2b..4dfd313 100644
--- a/arch/arm/include/asm/arch-sunxi/i2c.h
+++ b/arch/arm/include/asm/arch-sunxi/i2c.h
@@ -23,6 +23,9 @@
#ifdef CONFIG_I2C4_ENABLE
#define CONFIG_I2C_MVTWSI_BASE4 SUNXI_TWI4_BASE
#endif
+#ifdef CONFIG_R_I2C_ENABLE
+#define CONFIG_I2C_MVTWSI_BASE5 SUNXI_R_TWI_BASE
+#endif
/* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
#define CONFIG_SYS_TCLK 24000000
diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h
index 82ed541..556c1af 100644
--- a/arch/arm/include/asm/arch-sunxi/prcm.h
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
@@ -236,5 +236,7 @@
};
void prcm_apb0_enable(u32 flags);
+void prcm_apb0_disable(u32 flags);
+
#endif /* __ASSEMBLY__ */
#endif /* _PRCM_H */