powerpc/p4080: Add support for secure boot flow
Pre u-boot Flow:
1. User loads the u-boot image in flash
2. PBL/Configuration word is used to create LAW for Flash at 0xc0000000
(Please note that ISBC expects all these addresses, images to be
validated, entry point etc within 0 - 3.5G range)
3. ISBC validates the u-boot image, and passes control to u-boot
at 0xcffffffc.
Changes in u-boot:
1. Temporarily map CONFIG_SYS_MONITOR_BASE to the 1M
CONFIG_SYS_PBI_FLASH_WINDOW in AS=1.
(The CONFIG_SYS_PBI_FLASH_WINDOW is the address map for the flash
created by PBL/configuration word within 0 - 3.5G memory range. The
u-boot image at this address has been validated by ISBC code)
2. Remove TLB entries for 0 - 3.5G created by ISBC code
3. Remove the LAW entry for the CONFIG_SYS_PBI_FLASH_WINDOW created by
PBL/configuration word after switch to AS = 1
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Kuldip Giroh <kuldip.giroh@freescale.com>
Acked-by: Wood Scott-B07421 <B07421@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 0dd57f3..135e2d8 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2396,6 +2396,8 @@
#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
+#define CONFIG_SYS_SNVS_OFFSET 0xE6000
+#define CONFIG_SYS_SFP_OFFSET 0xE7000
#define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000
#define CONFIG_SYS_FSL_QMAN_OFFSET 0x88000
#define CONFIG_SYS_FSL_BMAN_OFFSET 0x8a000