dts: rk3399: move rockchip, vbus-gpio properties into board-specific files
The (shared) rk3399.dtsi had defined the 'rockchip,vbus-gpio'
properties for each USB 3.0 controller.
As the GPIO usage will vary (e.g. one of those GPIOs shuts down one of
the regulators on the RK3399-Q7) between boards, we move this from the
shared dtsi into the device tree file for the EVB board which these
GPIO definitions match.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
index a959989..c3a7ca2 100644
--- a/arch/arm/dts/rk3399-evb.dts
+++ b/arch/arm/dts/rk3399-evb.dts
@@ -95,6 +95,7 @@
};
&dwc3_typec0 {
+ rockchip,vbus-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -107,6 +108,7 @@
};
&dwc3_typec1 {
+ rockchip,vbus-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
index 754d34a..dbe55f2 100644
--- a/arch/arm/dts/rk3399.dtsi
+++ b/arch/arm/dts/rk3399.dtsi
@@ -239,7 +239,6 @@
compatible = "rockchip,rk3399-xhci";
reg = <0x0 0xfe800000 0x0 0x100000>;
status = "disabled";
- rockchip,vbus-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
snps,dis-enblslpm-quirk;
snps,phyif-utmi-bits = <16>;
snps,dis-u2-freeclk-exists-quirk;
@@ -261,7 +260,6 @@
compatible = "rockchip,rk3399-xhci";
reg = <0x0 0xfe900000 0x0 0x100000>;
status = "disabled";
- rockchip,vbus-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
snps,dis-enblslpm-quirk;
snps,phyif-utmi-bits = <16>;
snps,dis-u2-freeclk-exists-quirk;