sunxi: Add sun5i support
Add support for the Allwinner A13 and A10s SoCs also know as the Allwinner
sun5i family, and the A13-OLinuXinoM A13 based and r7-tv-dongle A10s based
boards.
The only differences compared to the already supported sun4i and sun7i
families are all in the DRAM controller initialization:
-Different hcpr values
-Different MBUS settings
-Some other small initialization changes
Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 856d353..6c70639 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -12,6 +12,7 @@
obj-y += clock.o
obj-y += pinmux.o
obj-$(CONFIG_SUN4I) += clock_sun4i.o
+obj-$(CONFIG_SUN5I) += clock_sun4i.o
obj-$(CONFIG_SUN7I) += clock_sun4i.o
ifndef CONFIG_SPL_BUILD
@@ -20,6 +21,7 @@
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SUN4I) += dram.o
+obj-$(CONFIG_SUN5I) += dram.o
obj-$(CONFIG_SUN7I) += dram.o
ifdef CONFIG_SPL_FEL
obj-y += start.o
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index c80b421..0118f5b 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -47,9 +47,21 @@
int gpio_init(void)
{
+#if CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I))
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX);
+ sunxi_gpio_set_pull(SUNXI_GPB(20), 1);
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX);
+ sunxi_gpio_set_pull(SUNXI_GPG(4), 1);
+#else
+#error Unsupported console port number. Please fix pin mux settings in board.c
+#endif
return 0;
}
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
index b4b5089..5cf35ac 100644
--- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -15,6 +15,14 @@
{
#ifdef CONFIG_SUN4I
puts("CPU: Allwinner A10 (SUN4I)\n");
+#elif defined CONFIG_SUN5I
+ u32 val = readl(SUNXI_SID_BASE + 0x08);
+ switch ((val >> 12) & 0xf) {
+ case 0: puts("CPU: Allwinner A12 (SUN5I)\n"); break;
+ case 3: puts("CPU: Allwinner A13 (SUN5I)\n"); break;
+ case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break;
+ default: puts("CPU: Allwinner A1X (SUN5I)\n");
+ }
#elif defined CONFIG_SUN7I
puts("CPU: Allwinner A20 (SUN7I)\n");
#else
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c
index 1de7529..0f1ceec 100644
--- a/arch/arm/cpu/armv7/sunxi/dram.c
+++ b/arch/arm/cpu/armv7/sunxi/dram.c
@@ -155,6 +155,16 @@
}
static u32 hpcr_value[32] = {
+#ifdef CONFIG_SUN5I
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x1031, 0x1031, 0x0735, 0x1035,
+ 0x1035, 0x0731, 0x1031, 0,
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0x0301, 0x0301, 0x0301, 0
+#endif
#ifdef CONFIG_SUN4I
0x0301, 0x0301, 0x0301, 0x0301,
0x0301, 0x0301, 0, 0,
@@ -257,9 +267,15 @@
#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
/* setup MBUS clock */
reg_val = CCM_MBUS_CTRL_GATE |
+#ifdef CONFIG_SUN7I
CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) |
CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
+#else /* defined(CONFIG_SUN5I) */
+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) |
+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
+#endif
writel(reg_val, &ccm->mbus_clk_cfg);
#endif
@@ -468,6 +484,11 @@
/* setup DRAM relative clock */
mctl_setup_dram_clock(para->clock);
+#ifdef CONFIG_SUN5I
+ /* Disable any pad power save control */
+ writel(0, &dram->ppwrsctl);
+#endif
+
/* reset external DRAM */
#ifndef CONFIG_SUN7I
mctl_ddr3_reset();