configs: at91: sama7g54_curiosity: Add initial default configs
Add default configuration for nand-flash to boot the linux kernel.
Add default configuration for qspi-flash to boot the linux kernel.
Add default configuration for sd-card to boot the linux kernel.
Configs are synced with savedefconfig.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
diff --git a/configs/sama7g54_curiosity_nandflash_defconfig b/configs/sama7g54_curiosity_nandflash_defconfig
new file mode 100644
index 0000000..331bb8d
--- /dev/null
+++ b/configs/sama7g54_curiosity_nandflash_defconfig
@@ -0,0 +1,122 @@
+CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
+CONFIG_TEXT_BASE=0x66f00000
+CONFIG_SYS_MALLOC_LEN=0x1000000
+CONFIG_SYS_MALLOC_F_LEN=0x40000
+CONFIG_TARGET_SAMA7G54_CURIOSITY=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60044000
+CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_ENV_SECT_SIZE=0x1000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama7g54_curiosity"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x62000000
+CONFIG_SYS_MEMTEST_START=0x60000000
+CONFIG_SYS_MEMTEST_END=0x68000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_FIT=y
+# CONFIG_BOOTSTD is not set
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_NAND_BOOT=y
+CONFIG_QSPI_BOOT=y
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk1p2 rw rootwait"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="nand read 0x61000000 0x180000 0x80000; nand read 0x62000000 0x200000 0x600000; bootz 0x62000000 - 0x61000000"
+CONFIG_LOGLEVEL=6
+CONFIG_BOARD_TYPES=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEM_SEARCH=y
+CONFIG_CMD_MX_CYCLIC=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_STRINGS=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_LSBLK=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_CMD_NAND_TORTURE=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_XXD=y
+CONFIG_CMD_RTC=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SPREAD=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
+CONFIG_MTDIDS_DEFAULT="nand0=nand0,nor0=nor0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=nand0:256k(bootstrap-nand)ro,1M(u-boot-nand)ro,256k(env-nand)ro,512k(dtb-nand)ro,6M(kernel-nand)ro,-(rootfs-nand)ro;nor0:256k(bootstrap-nor)ro,1M(u-boot-nor)ro,256k(env-nor)ro,512k(dtb-nor)ro,6M(kernel-nor)ro"
+CONFIG_OF_CONTROL=y
+# CONFIG_OF_TAG_MIGRATE is not set
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_HOSTNAME=y
+CONFIG_HOSTNAME="SAMA7G54"
+CONFIG_VERSION_VARIABLE=y
+# CONFIG_NET is not set
+CONFIG_CLK=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_CPU=y
+CONFIG_ATMEL_PIO4=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_NAND_ATMEL=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_SST=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91PIO4=y
+CONFIG_RESET_AT91=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_EMULATION=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_AT91=y
+CONFIG_TIMER=y
+CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_FAT_WRITE=y
+CONFIG_CMD_DHRYSTONE=y
+# CONFIG_EFI_LOADER is not set
+CONFIG_PHANDLE_CHECK_SEQ=y