rockchip: rk3399: remove duplicate call to regulators_enable_boot_on
An earlier commit makes the common SPL code call
regulators_enable_boot_on and regulators_enable_boot_off before
iterating over possible boot media for U-Boot proper. There is therefore
no need to do this in the rk3399-specific code, so let's remove it.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Tested-by: Xavier Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
index a7cc91a..cbd2ea0 100644
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -280,15 +280,5 @@
if (cru->glb_rst_st != 0)
rk3399_force_power_on_reset();
}
-
- if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) {
- /*
- * Turning the eMMC and SPI back on (if disabled via the Qseven
- * BIOS_ENABLE) signal is done through a always-on regulator).
- */
- if (regulators_enable_boot_on(false))
- debug("%s: Cannot enable boot on regulator\n",
- __func__);
- }
}
#endif