mpc8379erdb: Add device tree
Signed-off-by: Sinan Akman <sinan@writeme.com>
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
index 3ecda36..ceaa8ce 100644
--- a/arch/powerpc/dts/Makefile
+++ b/arch/powerpc/dts/Makefile
@@ -7,6 +7,7 @@
dtb-$(CONFIG_TARGET_KMSUPX5) += kmsupc5.dtb kmsupm5.dtb
dtb-$(CONFIG_TARGET_KMTEGR1) += kmtegr1.dtb
dtb-$(CONFIG_TARGET_KMTEPR2) += kmtepr2.dtb
+dtb-$(CONFIG_TARGET_MPC837XERDB) += mpc8379erdb.dtb
dtb-$(CONFIG_TARGET_MPC8548CDS) += mpc8548cds.dtb mpc8548cds_36b.dtb
dtb-$(CONFIG_TARGET_P1010RDB_PA) += p1010rdb-pa.dtb p1010rdb-pa_36b.dtb
dtb-$(CONFIG_TARGET_P1010RDB_PB) += p1010rdb-pb.dtb p1010rdb-pb_36b.dtb
diff --git a/arch/powerpc/dts/mpc8379erdb.dts b/arch/powerpc/dts/mpc8379erdb.dts
new file mode 100644
index 0000000..b1881b1
--- /dev/null
+++ b/arch/powerpc/dts/mpc8379erdb.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * MPC8379E RDB Device Tree Source
+ *
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "fsl,mpc8379erdb";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8379@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; // 256MB at 0
+ };
+
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ immr@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ bus-frequency = <0>;
+
+ sdhc@2e000 {
+ compatible = "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ bus-width = <0x4>;
+ clock-frequency = <0>;
+ };
+
+ ipic: interrupt-controller@700 {
+ compatible = "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ device_type = "ipic";
+ };
+
+ };
+
+};