| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2017 NXP |
| * |
| * Peng Fan <peng.fan@nxp.com> |
| */ |
| |
| #include <common.h> |
| #include <fdtdec.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <log.h> |
| #include <power/pmic.h> |
| #include <power/regulator.h> |
| #include <power/pfuze100_pmic.h> |
| |
| /** |
| * struct pfuze100_regulator_desc - regulator descriptor |
| * |
| * @name: Identify name for the regulator. |
| * @type: Indicates the regulator type. |
| * @uV_step: Voltage increase for each selector. |
| * @vsel_reg: Register for adjust regulator voltage for normal. |
| * @vsel_mask: Mask bit for setting regulator voltage for normal. |
| * @stby_reg: Register for adjust regulator voltage for standby. |
| * @stby_mask: Mask bit for setting regulator voltage for standby. |
| * @volt_table: Voltage mapping table (if table based mapping). |
| * @voltage: Current voltage for REGULATOR_TYPE_FIXED type regulator. |
| */ |
| struct pfuze100_regulator_desc { |
| char *name; |
| enum regulator_type type; |
| unsigned int uV_step; |
| unsigned int vsel_reg; |
| unsigned int vsel_mask; |
| unsigned int stby_reg; |
| unsigned int stby_mask; |
| unsigned int *volt_table; |
| unsigned int voltage; |
| }; |
| |
| /** |
| * struct pfuze100_regulator_platdata - platform data for pfuze100 |
| * |
| * @desc: Points the description entry of one regulator of pfuze100 |
| */ |
| struct pfuze100_regulator_platdata { |
| struct pfuze100_regulator_desc *desc; |
| }; |
| |
| #define PFUZE100_FIXED_REG(_name, base, vol) \ |
| { \ |
| .name = #_name, \ |
| .type = REGULATOR_TYPE_FIXED, \ |
| .voltage = (vol), \ |
| } |
| |
| #define PFUZE100_SW_REG(_name, base, step) \ |
| { \ |
| .name = #_name, \ |
| .type = REGULATOR_TYPE_BUCK, \ |
| .uV_step = (step), \ |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| .vsel_mask = 0x3F, \ |
| .stby_reg = (base) + PFUZE100_STBY_OFFSET, \ |
| .stby_mask = 0x3F, \ |
| } |
| |
| #define PFUZE100_SWB_REG(_name, base, mask, step, voltages) \ |
| { \ |
| .name = #_name, \ |
| .type = REGULATOR_TYPE_BUCK, \ |
| .uV_step = (step), \ |
| .vsel_reg = (base), \ |
| .vsel_mask = (mask), \ |
| .volt_table = (voltages), \ |
| } |
| |
| #define PFUZE100_SNVS_REG(_name, base, mask, voltages) \ |
| { \ |
| .name = #_name, \ |
| .type = REGULATOR_TYPE_OTHER, \ |
| .vsel_reg = (base), \ |
| .vsel_mask = (mask), \ |
| .volt_table = (voltages), \ |
| } |
| |
| #define PFUZE100_VGEN_REG(_name, base, step) \ |
| { \ |
| .name = #_name, \ |
| .type = REGULATOR_TYPE_LDO, \ |
| .uV_step = (step), \ |
| .vsel_reg = (base), \ |
| .vsel_mask = 0xF, \ |
| .stby_reg = (base), \ |
| .stby_mask = 0x20, \ |
| } |
| |
| #define PFUZE3000_VCC_REG(_name, base, step) \ |
| { \ |
| .name = #_name, \ |
| .type = REGULATOR_TYPE_LDO, \ |
| .uV_step = (step), \ |
| .vsel_reg = (base), \ |
| .vsel_mask = 0x3, \ |
| .stby_reg = (base), \ |
| .stby_mask = 0x20, \ |
| } |
| |
| #define PFUZE3000_SW1_REG(_name, base, step) \ |
| { \ |
| .name = #_name, \ |
| .type = REGULATOR_TYPE_BUCK, \ |
| .uV_step = (step), \ |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| .vsel_mask = 0x1F, \ |
| .stby_reg = (base) + PFUZE100_STBY_OFFSET, \ |
| .stby_mask = 0x1F, \ |
| } |
| |
| #define PFUZE3000_SW2_REG(_name, base, step) \ |
| { \ |
| .name = #_name, \ |
| .type = REGULATOR_TYPE_BUCK, \ |
| .uV_step = (step), \ |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| .vsel_mask = 0x7, \ |
| .stby_reg = (base) + PFUZE100_STBY_OFFSET, \ |
| .stby_mask = 0x7, \ |
| } |
| |
| #define PFUZE3000_SW3_REG(_name, base, step) \ |
| { \ |
| .name = #_name, \ |
| .type = REGULATOR_TYPE_BUCK, \ |
| .uV_step = (step), \ |
| .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ |
| .vsel_mask = 0xF, \ |
| .stby_reg = (base) + PFUZE100_STBY_OFFSET, \ |
| .stby_mask = 0xF, \ |
| } |
| |
| static unsigned int pfuze100_swbst[] = { |
| 5000000, 5050000, 5100000, 5150000 |
| }; |
| |
| static unsigned int pfuze100_vsnvs[] = { |
| 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, -1 |
| }; |
| |
| static unsigned int pfuze3000_vsnvs[] = { |
| -1, -1, -1, -1, -1, -1, 3000000, -1 |
| }; |
| |
| static unsigned int pfuze3000_sw2lo[] = { |
| 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000 |
| }; |
| |
| /* PFUZE100 */ |
| static struct pfuze100_regulator_desc pfuze100_regulators[] = { |
| PFUZE100_SW_REG(sw1ab, PFUZE100_SW1ABVOL, 25000), |
| PFUZE100_SW_REG(sw1c, PFUZE100_SW1CVOL, 25000), |
| PFUZE100_SW_REG(sw2, PFUZE100_SW2VOL, 25000), |
| PFUZE100_SW_REG(sw3a, PFUZE100_SW3AVOL, 25000), |
| PFUZE100_SW_REG(sw3b, PFUZE100_SW3BVOL, 25000), |
| PFUZE100_SW_REG(sw4, PFUZE100_SW4VOL, 25000), |
| PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst), |
| PFUZE100_SNVS_REG(vsnvs, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), |
| PFUZE100_FIXED_REG(vrefddr, PFUZE100_VREFDDRCON, 750000), |
| PFUZE100_VGEN_REG(vgen1, PFUZE100_VGEN1VOL, 50000), |
| PFUZE100_VGEN_REG(vgen2, PFUZE100_VGEN2VOL, 50000), |
| PFUZE100_VGEN_REG(vgen3, PFUZE100_VGEN3VOL, 100000), |
| PFUZE100_VGEN_REG(vgen4, PFUZE100_VGEN4VOL, 100000), |
| PFUZE100_VGEN_REG(vgen5, PFUZE100_VGEN5VOL, 100000), |
| PFUZE100_VGEN_REG(vgen6, PFUZE100_VGEN6VOL, 100000), |
| }; |
| |
| /* PFUZE200 */ |
| static struct pfuze100_regulator_desc pfuze200_regulators[] = { |
| PFUZE100_SW_REG(sw1ab, PFUZE100_SW1ABVOL, 25000), |
| PFUZE100_SW_REG(sw2, PFUZE100_SW2VOL, 25000), |
| PFUZE100_SW_REG(sw3a, PFUZE100_SW3AVOL, 25000), |
| PFUZE100_SW_REG(sw3b, PFUZE100_SW3BVOL, 25000), |
| PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst), |
| PFUZE100_SNVS_REG(vsnvs, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), |
| PFUZE100_FIXED_REG(vrefddr, PFUZE100_VREFDDRCON, 750000), |
| PFUZE100_VGEN_REG(vgen1, PFUZE100_VGEN1VOL, 50000), |
| PFUZE100_VGEN_REG(vgen2, PFUZE100_VGEN2VOL, 50000), |
| PFUZE100_VGEN_REG(vgen3, PFUZE100_VGEN3VOL, 100000), |
| PFUZE100_VGEN_REG(vgen4, PFUZE100_VGEN4VOL, 100000), |
| PFUZE100_VGEN_REG(vgen5, PFUZE100_VGEN5VOL, 100000), |
| PFUZE100_VGEN_REG(vgen6, PFUZE100_VGEN6VOL, 100000), |
| }; |
| |
| /* PFUZE3000 */ |
| static struct pfuze100_regulator_desc pfuze3000_regulators[] = { |
| PFUZE3000_SW1_REG(sw1a, PFUZE100_SW1ABVOL, 25000), |
| PFUZE3000_SW1_REG(sw1b, PFUZE100_SW1CVOL, 25000), |
| PFUZE100_SWB_REG(sw2, PFUZE100_SW2VOL, 0x7, 50000, pfuze3000_sw2lo), |
| PFUZE3000_SW3_REG(sw3, PFUZE100_SW3AVOL, 50000), |
| PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst), |
| PFUZE100_SNVS_REG(vsnvs, PFUZE100_VSNVSVOL, 0x7, pfuze3000_vsnvs), |
| PFUZE100_FIXED_REG(vrefddr, PFUZE100_VREFDDRCON, 750000), |
| PFUZE100_VGEN_REG(vldo1, PFUZE100_VGEN1VOL, 100000), |
| PFUZE100_VGEN_REG(vldo2, PFUZE100_VGEN2VOL, 50000), |
| PFUZE3000_VCC_REG(vccsd, PFUZE100_VGEN3VOL, 150000), |
| PFUZE3000_VCC_REG(v33, PFUZE100_VGEN4VOL, 150000), |
| PFUZE100_VGEN_REG(vldo3, PFUZE100_VGEN5VOL, 100000), |
| PFUZE100_VGEN_REG(vldo4, PFUZE100_VGEN6VOL, 100000), |
| }; |
| |
| #define MODE(_id, _val, _name) { \ |
| .id = _id, \ |
| .register_value = _val, \ |
| .name = _name, \ |
| } |
| |
| /* SWx Buck regulator mode */ |
| static struct dm_regulator_mode pfuze_sw_modes[] = { |
| MODE(OFF_OFF, OFF_OFF, "OFF_OFF"), |
| MODE(PWM_OFF, PWM_OFF, "PWM_OFF"), |
| MODE(PFM_OFF, PFM_OFF, "PFM_OFF"), |
| MODE(APS_OFF, APS_OFF, "APS_OFF"), |
| MODE(PWM_PWM, PWM_PWM, "PWM_PWM"), |
| MODE(PWM_APS, PWM_APS, "PWM_APS"), |
| MODE(APS_APS, APS_APS, "APS_APS"), |
| MODE(APS_PFM, APS_PFM, "APS_PFM"), |
| MODE(PWM_PFM, PWM_PFM, "PWM_PFM"), |
| }; |
| |
| /* Boost Buck regulator mode for normal operation */ |
| static struct dm_regulator_mode pfuze_swbst_modes[] = { |
| MODE(SWBST_MODE_OFF, SWBST_MODE_OFF , "SWBST_MODE_OFF"), |
| MODE(SWBST_MODE_PFM, SWBST_MODE_PFM, "SWBST_MODE_PFM"), |
| MODE(SWBST_MODE_AUTO, SWBST_MODE_AUTO, "SWBST_MODE_AUTO"), |
| MODE(SWBST_MODE_APS, SWBST_MODE_APS, "SWBST_MODE_APS"), |
| }; |
| |
| /* VGENx LDO regulator mode for normal operation */ |
| static struct dm_regulator_mode pfuze_ldo_modes[] = { |
| MODE(LDO_MODE_OFF, LDO_MODE_OFF, "LDO_MODE_OFF"), |
| MODE(LDO_MODE_ON, LDO_MODE_ON, "LDO_MODE_ON"), |
| }; |
| |
| static struct pfuze100_regulator_desc *se_desc(struct pfuze100_regulator_desc *desc, |
| int size, |
| const char *name) |
| { |
| int i; |
| |
| for (i = 0; i < size; desc++) { |
| if (!strcmp(desc->name, name)) |
| return desc; |
| continue; |
| } |
| |
| return NULL; |
| } |
| |
| static int pfuze100_regulator_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| struct pfuze100_regulator_platdata *plat = dev_get_platdata(dev); |
| struct pfuze100_regulator_desc *desc; |
| |
| switch (dev_get_driver_data(dev_get_parent(dev))) { |
| case PFUZE100: |
| desc = se_desc(pfuze100_regulators, |
| ARRAY_SIZE(pfuze100_regulators), |
| dev->name); |
| break; |
| case PFUZE200: |
| desc = se_desc(pfuze200_regulators, |
| ARRAY_SIZE(pfuze200_regulators), |
| dev->name); |
| break; |
| case PFUZE3000: |
| desc = se_desc(pfuze3000_regulators, |
| ARRAY_SIZE(pfuze3000_regulators), |
| dev->name); |
| break; |
| default: |
| debug("Unsupported PFUZE\n"); |
| return -EINVAL; |
| } |
| if (!desc) { |
| debug("Do not support regulator %s\n", dev->name); |
| return -EINVAL; |
| } |
| |
| plat->desc = desc; |
| uc_pdata = dev_get_uclass_platdata(dev); |
| |
| uc_pdata->type = desc->type; |
| if (uc_pdata->type == REGULATOR_TYPE_BUCK) { |
| if (!strcmp(dev->name, "swbst")) { |
| uc_pdata->mode = pfuze_swbst_modes; |
| uc_pdata->mode_count = ARRAY_SIZE(pfuze_swbst_modes); |
| } else { |
| uc_pdata->mode = pfuze_sw_modes; |
| uc_pdata->mode_count = ARRAY_SIZE(pfuze_sw_modes); |
| } |
| } else if (uc_pdata->type == REGULATOR_TYPE_LDO) { |
| uc_pdata->mode = pfuze_ldo_modes; |
| uc_pdata->mode_count = ARRAY_SIZE(pfuze_ldo_modes); |
| } else { |
| uc_pdata->mode = NULL; |
| uc_pdata->mode_count = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int pfuze100_regulator_mode(struct udevice *dev, int op, int *opmode) |
| { |
| int val; |
| struct pfuze100_regulator_platdata *plat = dev_get_platdata(dev); |
| struct pfuze100_regulator_desc *desc = plat->desc; |
| |
| if (op == PMIC_OP_GET) { |
| if (desc->type == REGULATOR_TYPE_BUCK) { |
| if (!strcmp(dev->name, "swbst")) { |
| val = pmic_reg_read(dev->parent, |
| desc->vsel_reg); |
| if (val < 0) |
| return val; |
| |
| val &= SWBST_MODE_MASK; |
| val >>= SWBST_MODE_SHIFT; |
| *opmode = val; |
| |
| return 0; |
| } |
| val = pmic_reg_read(dev->parent, |
| desc->vsel_reg + |
| PFUZE100_MODE_OFFSET); |
| if (val < 0) |
| return val; |
| |
| val &= SW_MODE_MASK; |
| val >>= SW_MODE_SHIFT; |
| *opmode = val; |
| |
| return 0; |
| |
| } else if (desc->type == REGULATOR_TYPE_LDO) { |
| val = pmic_reg_read(dev->parent, desc->vsel_reg); |
| if (val < 0) |
| return val; |
| |
| val &= LDO_MODE_MASK; |
| val >>= LDO_MODE_SHIFT; |
| *opmode = val; |
| |
| return 0; |
| } else { |
| return -EINVAL; |
| } |
| } |
| |
| if (desc->type == REGULATOR_TYPE_BUCK) { |
| if (!strcmp(dev->name, "swbst")) |
| return pmic_clrsetbits(dev->parent, desc->vsel_reg, |
| SWBST_MODE_MASK, |
| *opmode << SWBST_MODE_SHIFT); |
| |
| val = pmic_clrsetbits(dev->parent, |
| desc->vsel_reg + PFUZE100_MODE_OFFSET, |
| SW_MODE_MASK, |
| *opmode << SW_MODE_SHIFT); |
| |
| } else if (desc->type == REGULATOR_TYPE_LDO) { |
| val = pmic_clrsetbits(dev->parent, desc->vsel_reg, |
| LDO_MODE_MASK, |
| *opmode << LDO_MODE_SHIFT); |
| return val; |
| } else { |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int pfuze100_regulator_enable(struct udevice *dev, int op, bool *enable) |
| { |
| int val; |
| int ret, on_off; |
| struct dm_regulator_uclass_platdata *uc_pdata = |
| dev_get_uclass_platdata(dev); |
| |
| if (op == PMIC_OP_GET) { |
| if (!strcmp(dev->name, "vrefddr")) { |
| val = pmic_reg_read(dev->parent, PFUZE100_VREFDDRCON); |
| if (val < 0) |
| return val; |
| |
| if (val & VREFDDRCON_EN) |
| *enable = true; |
| else |
| *enable = false; |
| return 0; |
| } |
| ret = pfuze100_regulator_mode(dev, op, &on_off); |
| if (ret) |
| return ret; |
| switch (on_off) { |
| /* OFF_OFF, SWBST_MODE_OFF, LDO_MODE_OFF have same value */ |
| case OFF_OFF: |
| *enable = false; |
| break; |
| default: |
| *enable = true; |
| break; |
| } |
| } else if (op == PMIC_OP_SET) { |
| if (!strcmp(dev->name, "vrefddr")) { |
| val = pmic_reg_read(dev->parent, PFUZE100_VREFDDRCON); |
| if (val < 0) |
| return val; |
| |
| if (val & VREFDDRCON_EN) |
| return 0; |
| val |= VREFDDRCON_EN; |
| |
| return pmic_reg_write(dev->parent, PFUZE100_VREFDDRCON, |
| val); |
| } |
| |
| if (uc_pdata->type == REGULATOR_TYPE_LDO) { |
| on_off = *enable ? LDO_MODE_ON : LDO_MODE_OFF; |
| } else if (uc_pdata->type == REGULATOR_TYPE_BUCK) { |
| if (!strcmp(dev->name, "swbst")) |
| on_off = *enable ? SWBST_MODE_AUTO : |
| SWBST_MODE_OFF; |
| else |
| on_off = *enable ? APS_PFM : OFF_OFF; |
| } else { |
| return -EINVAL; |
| } |
| |
| return pfuze100_regulator_mode(dev, op, &on_off); |
| } |
| |
| return 0; |
| } |
| |
| static int pfuze100_regulator_val(struct udevice *dev, int op, int *uV) |
| { |
| int i; |
| int val; |
| struct pfuze100_regulator_platdata *plat = dev_get_platdata(dev); |
| struct pfuze100_regulator_desc *desc = plat->desc; |
| struct dm_regulator_uclass_platdata *uc_pdata = |
| dev_get_uclass_platdata(dev); |
| |
| if (op == PMIC_OP_GET) { |
| *uV = 0; |
| if (uc_pdata->type == REGULATOR_TYPE_FIXED) { |
| *uV = desc->voltage; |
| } else if (desc->volt_table) { |
| val = pmic_reg_read(dev->parent, desc->vsel_reg); |
| if (val < 0) |
| return val; |
| val &= desc->vsel_mask; |
| *uV = desc->volt_table[val]; |
| } else { |
| if (uc_pdata->min_uV < 0) { |
| debug("Need to provide min_uV in dts.\n"); |
| return -EINVAL; |
| } |
| val = pmic_reg_read(dev->parent, desc->vsel_reg); |
| if (val < 0) |
| return val; |
| val &= desc->vsel_mask; |
| *uV = uc_pdata->min_uV + (int)val * desc->uV_step; |
| } |
| |
| return 0; |
| } |
| |
| if (uc_pdata->type == REGULATOR_TYPE_FIXED) { |
| debug("Set voltage for REGULATOR_TYPE_FIXED regulator\n"); |
| return -EINVAL; |
| } else if (desc->volt_table) { |
| for (i = 0; i <= desc->vsel_mask; i++) { |
| if (*uV == desc->volt_table[i]) |
| break; |
| } |
| if (i == desc->vsel_mask + 1) { |
| debug("Unsupported voltage %u\n", *uV); |
| return -EINVAL; |
| } |
| |
| return pmic_clrsetbits(dev->parent, desc->vsel_reg, |
| desc->vsel_mask, i); |
| } else { |
| if (uc_pdata->min_uV < 0) { |
| debug("Need to provide min_uV in dts.\n"); |
| return -EINVAL; |
| } |
| return pmic_clrsetbits(dev->parent, desc->vsel_reg, |
| desc->vsel_mask, |
| (*uV - uc_pdata->min_uV) / desc->uV_step); |
| } |
| |
| return 0; |
| } |
| |
| static int pfuze100_regulator_get_value(struct udevice *dev) |
| { |
| int uV; |
| int ret; |
| |
| ret = pfuze100_regulator_val(dev, PMIC_OP_GET, &uV); |
| if (ret) |
| return ret; |
| |
| return uV; |
| } |
| |
| static int pfuze100_regulator_set_value(struct udevice *dev, int uV) |
| { |
| return pfuze100_regulator_val(dev, PMIC_OP_SET, &uV); |
| } |
| |
| static int pfuze100_regulator_get_enable(struct udevice *dev) |
| { |
| int ret; |
| bool enable = false; |
| |
| ret = pfuze100_regulator_enable(dev, PMIC_OP_GET, &enable); |
| if (ret) |
| return ret; |
| |
| return enable; |
| } |
| |
| static int pfuze100_regulator_set_enable(struct udevice *dev, bool enable) |
| { |
| return pfuze100_regulator_enable(dev, PMIC_OP_SET, &enable); |
| } |
| |
| static int pfuze100_regulator_get_mode(struct udevice *dev) |
| { |
| int mode; |
| int ret; |
| |
| ret = pfuze100_regulator_mode(dev, PMIC_OP_GET, &mode); |
| if (ret) |
| return ret; |
| |
| return mode; |
| } |
| |
| static int pfuze100_regulator_set_mode(struct udevice *dev, int mode) |
| { |
| return pfuze100_regulator_mode(dev, PMIC_OP_SET, &mode); |
| } |
| |
| static const struct dm_regulator_ops pfuze100_regulator_ops = { |
| .get_value = pfuze100_regulator_get_value, |
| .set_value = pfuze100_regulator_set_value, |
| .get_enable = pfuze100_regulator_get_enable, |
| .set_enable = pfuze100_regulator_set_enable, |
| .get_mode = pfuze100_regulator_get_mode, |
| .set_mode = pfuze100_regulator_set_mode, |
| }; |
| |
| U_BOOT_DRIVER(pfuze100_regulator) = { |
| .name = "pfuze100_regulator", |
| .id = UCLASS_REGULATOR, |
| .ops = &pfuze100_regulator_ops, |
| .probe = pfuze100_regulator_probe, |
| .platdata_auto = sizeof(struct pfuze100_regulator_platdata), |
| }; |