diff --git a/arch/arm/mach-aspeed/Makefile b/arch/arm/mach-aspeed/Makefile
index 1f7af71..9d29ff7 100644
--- a/arch/arm/mach-aspeed/Makefile
+++ b/arch/arm/mach-aspeed/Makefile
@@ -5,4 +5,4 @@
 #
 
 obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o
-obj-$(CONFIG_ASPEED_AST2500) += ast2500/
+obj-$(CONFIG_ASPEED_AST2500) += ast2500/ ast2500-board.o
diff --git a/arch/arm/mach-aspeed/ast2500-board.c b/arch/arm/mach-aspeed/ast2500-board.c
new file mode 100644
index 0000000..80446af
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2500-board.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <dm.h>
+#include <ram.h>
+#include <timer.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/wdt.h>
+#include <linux/err.h>
+#include <dm/uclass.h>
+
+/*
+ * Second Watchdog Timer by default is configured
+ * to trigger secondary boot source.
+ */
+#define AST_2ND_BOOT_WDT		1
+
+/*
+ * Third Watchdog Timer by default is configured
+ * to toggle Flash address mode switch before reset.
+ */
+#define AST_FLASH_ADDR_DETECT_WDT	2
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void lowlevel_init(void)
+{
+	/*
+	 * These two watchdogs need to be stopped as soon as possible,
+	 * otherwise the board might hang. By default they are set to
+	 * a very short timeout and even simple debug write to serial
+	 * console early in the init process might cause them to fire.
+	 */
+	struct ast_wdt *flash_addr_wdt =
+	    (struct ast_wdt *)(WDT_BASE +
+			       sizeof(struct ast_wdt) *
+			       AST_FLASH_ADDR_DETECT_WDT);
+
+	clrbits_le32(&flash_addr_wdt->ctrl, WDT_CTRL_EN);
+
+#ifndef CONFIG_FIRMWARE_2ND_BOOT
+	struct ast_wdt *sec_boot_wdt =
+	    (struct ast_wdt *)(WDT_BASE +
+			       sizeof(struct ast_wdt) *
+			       AST_2ND_BOOT_WDT);
+
+	clrbits_le32(&sec_boot_wdt->ctrl, WDT_CTRL_EN);
+#endif
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	struct udevice *dev;
+	struct ram_info ram;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (ret) {
+		debug("DRAM FAIL1\r\n");
+		return ret;
+	}
+
+	ret = ram_get_info(dev, &ram);
+	if (ret) {
+		debug("DRAM FAIL2\r\n");
+		return ret;
+	}
+
+	gd->ram_size = ram.size;
+
+	return 0;
+}