aspeed: Board init functions and common configs for ast2500 based boards
Add configuration file with parameters that are very likely to be shared by
all ast2500-based boards.
Add ast2500-board.c file with the init code that is very likely to be
shared by all ast2500-based boards.
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/mach-aspeed/ast2500-board.c b/arch/arm/mach-aspeed/ast2500-board.c
new file mode 100644
index 0000000..80446af
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2500-board.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <dm.h>
+#include <ram.h>
+#include <timer.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/wdt.h>
+#include <linux/err.h>
+#include <dm/uclass.h>
+
+/*
+ * Second Watchdog Timer by default is configured
+ * to trigger secondary boot source.
+ */
+#define AST_2ND_BOOT_WDT 1
+
+/*
+ * Third Watchdog Timer by default is configured
+ * to toggle Flash address mode switch before reset.
+ */
+#define AST_FLASH_ADDR_DETECT_WDT 2
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void lowlevel_init(void)
+{
+ /*
+ * These two watchdogs need to be stopped as soon as possible,
+ * otherwise the board might hang. By default they are set to
+ * a very short timeout and even simple debug write to serial
+ * console early in the init process might cause them to fire.
+ */
+ struct ast_wdt *flash_addr_wdt =
+ (struct ast_wdt *)(WDT_BASE +
+ sizeof(struct ast_wdt) *
+ AST_FLASH_ADDR_DETECT_WDT);
+
+ clrbits_le32(&flash_addr_wdt->ctrl, WDT_CTRL_EN);
+
+#ifndef CONFIG_FIRMWARE_2ND_BOOT
+ struct ast_wdt *sec_boot_wdt =
+ (struct ast_wdt *)(WDT_BASE +
+ sizeof(struct ast_wdt) *
+ AST_2ND_BOOT_WDT);
+
+ clrbits_le32(&sec_boot_wdt->ctrl, WDT_CTRL_EN);
+#endif
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ struct udevice *dev;
+ struct ram_info ram;
+ int ret;
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM FAIL1\r\n");
+ return ret;
+ }
+
+ ret = ram_get_info(dev, &ram);
+ if (ret) {
+ debug("DRAM FAIL2\r\n");
+ return ret;
+ }
+
+ gd->ram_size = ram.size;
+
+ return 0;
+}