MPC8308RDB: minimal support for devboard from Freescale
This patch provides support for MPC8308RDB development board from
Freescale with a minimal set of features:
Dual UART is supported
NOR flash is supported
Both TSEC Ethernet controllers are supported
PCI Express initialization is supported
The following features are enabled in configuration but not fully tested:
I2C (used to get the board revision)
I2C-connected RTC
VSC7385 switch
There is one (hopefully) minor issue: on soft reset the board sometimes
resets twice. I've not managed to find the fix for this problem yet.
As a workaround instruction cache can be disabled.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
diff --git a/MAKEALL b/MAKEALL
index 4637390..e7651dc 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -360,6 +360,7 @@
LIST_83xx=" \
caddy2 \
kmeter1 \
+ MPC8308RDB \
MPC8313ERDB_33 \
MPC8313ERDB_NAND_66 \
MPC8315ERDB \