rockchip: rk3288: remove pinctrl init in spl_board_init
The pinctrl will default init the io while driver is probe
with new pinctrl driver.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c
index d8d215d..b7fab63 100644
--- a/arch/arm/mach-rockchip/rk3288-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-spl.c
@@ -23,7 +23,6 @@
#include <asm/arch-rockchip/sdram_common.h>
#include <asm/arch-rockchip/sys_proto.h>
#include <asm/arch-rockchip/timer.h>
-#include <dm/pinctrl.h>
#include <dm/root.h>
#include <dm/test.h>
#include <dm/util.h>
diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index e2de5b2..a250d50 100644
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -16,7 +16,6 @@
#include <asm/arch-rockchip/qos_rk3288.h>
#include <asm/arch-rockchip/boot_mode.h>
#include <asm/gpio.h>
-#include <dm/pinctrl.h>
#include <dt-bindings/clock/rk3288-cru.h>
#include <power/regulator.h>
@@ -145,33 +144,7 @@
int board_init(void)
{
#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)
- struct udevice *pinctrl;
- int ret;
-
- /*
- * We need to implement sdcard iomux here for the further
- * initlization, otherwise, it'll hit sdcard command sending
- * timeout exception.
- */
- ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
- if (ret) {
- debug("%s: Cannot find pinctrl device\n", __func__);
- goto err;
- }
- ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
- if (ret) {
- debug("%s: Failed to set up SD card\n", __func__);
- goto err;
- }
-
return 0;
-err:
- printf("board_init: Error %d\n", ret);
-
- /* No way to report error here */
- hang();
-
- return -1;
#else
int ret;