Code cleanup.
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
index f18313d..dcfd83e 100644
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -50,13 +50,13 @@
MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0)
| MCFSDRAMC_DACR_CASL(1)
- | MCFSDRAMC_DACR_CBM(3)
+ | MCFSDRAMC_DACR_CBM(3)
| MCFSDRAMC_DACR_PS_16);
MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M
| MCFSDRAMC_DMR_V;
- MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
+ MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
*(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5;
MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
@@ -70,10 +70,10 @@
#ifdef CFG_SDRAM_BASE1
MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1)
| MCFSDRAMC_DACR_CASL(1)
- | MCFSDRAMC_DACR_CBM(3)
+ | MCFSDRAMC_DACR_CBM(3)
| MCFSDRAMC_DACR_PS_16;
- MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M
+ MCFSDRAMC_DMR1 = MCFSDRAMC_DMR_BAM_16M
| MCFSDRAMC_DMR_V;
MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP;
@@ -82,7 +82,7 @@
MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE;
for (i=0; i < 2000; i++)
asm(" nop");
- MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS;
+ MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS;
*(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
size += CFG_SDRAM_SIZE1 * 1024 * 1024;
#endif
diff --git a/board/BuS/EB+MCF-EV123/VCxK.c b/board/BuS/EB+MCF-EV123/VCxK.c
index 4938817..4b46b7c 100644
--- a/board/BuS/EB+MCF-EV123/VCxK.c
+++ b/board/BuS/EB+MCF-EV123/VCxK.c
@@ -66,7 +66,7 @@
return 1;
}
-void vcxk_loadimage(ulong source)
+void vcxk_loadimage(ulong source)
{
int cnt;
vcxk_acknowledge_wait();
diff --git a/board/BuS/EB+MCF-EV123/VCxK.h b/board/BuS/EB+MCF-EV123/VCxK.h
index 74467ba..f591e5c 100644
--- a/board/BuS/EB+MCF-EV123/VCxK.h
+++ b/board/BuS/EB+MCF-EV123/VCxK.h
@@ -25,24 +25,24 @@
#define __VCXK_H_
extern int init_vcxk(void);
-void vcxk_loadimage(ulong source);
+void vcxk_loadimage(ulong source);
#define VIDEO_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
-#define VIDEO_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
+#define VIDEO_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
#define VIDEO_ACKNOWLEDGE_PIN 0x0001
-#define VIDEO_ENABLE_PORT MCFGPTB_GPTPORT
-#define VIDEO_ENABLE_DDR MCFGPTB_GPTDDR
+#define VIDEO_ENABLE_PORT MCFGPTB_GPTPORT
+#define VIDEO_ENABLE_DDR MCFGPTB_GPTDDR
#define VIDEO_ENABLE_PIN 0x0002
-#define VIDEO_REQUEST_PORT MCFGPTB_GPTPORT
-#define VIDEO_REQUEST_DDR MCFGPTB_GPTDDR
+#define VIDEO_REQUEST_PORT MCFGPTB_GPTPORT
+#define VIDEO_REQUEST_DDR MCFGPTB_GPTDDR
#define VIDEO_REQUEST_PIN 0x0004
#define VIDEO_Invert_CFG MCFGPIO_PEPAR
#define VIDEO_Invert_IO MCFGPIO_PEPAR_PEPA2
-#define VIDEO_INVERT_PORT MCFGPIO_PORTE
-#define VIDEO_INVERT_DDR MCFGPIO_DDRE
+#define VIDEO_INVERT_PORT MCFGPIO_PORTE
+#define VIDEO_INVERT_DDR MCFGPIO_DDRE
#define VIDEO_INVERT_PIN MCFGPIO_PORT2
#endif
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c
index 6ecf0d1..b326384 100644
--- a/board/BuS/EB+MCF-EV123/cfm_flash.c
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.c
@@ -60,7 +60,7 @@
MCFCFM_MCR = 0;
MCFCFM_CLKD = CFM_CLK;
debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
- CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
+ CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
CFG_CLK);
MCFCFM_SACC = 0;
MCFCFM_DACC = 0;
diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c
index ba76bef..5e2647d 100644
--- a/board/BuS/EB+MCF-EV123/flash.c
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -256,7 +256,7 @@
enable_interrupts ();
if (cflag)
- icache_enable ();
+ icache_enable ();
return rc;
}
diff --git a/board/BuS/EB+MCF-EV123/u-boot.lds b/board/BuS/EB+MCF-EV123/u-boot.lds
index d790018..ac53245 100644
--- a/board/BuS/EB+MCF-EV123/u-boot.lds
+++ b/board/BuS/EB+MCF-EV123/u-boot.lds
@@ -34,11 +34,11 @@
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds
index b09fc33..214752d 100644
--- a/board/LEOX/elpt860/u-boot.lds
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -43,11 +43,11 @@
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/LEOX/elpt860/u-boot.lds.debug b/board/LEOX/elpt860/u-boot.lds.debug
index 6f5af91..17f99eb 100644
--- a/board/LEOX/elpt860/u-boot.lds.debug
+++ b/board/LEOX/elpt860/u-boot.lds.debug
@@ -43,11 +43,11 @@
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
+ .rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
diff --git a/board/MAI/AmigaOneG3SE/Makefile b/board/MAI/AmigaOneG3SE/Makefile
index cb6ea26..fa28d3b 100644
--- a/board/MAI/AmigaOneG3SE/Makefile
+++ b/board/MAI/AmigaOneG3SE/Makefile
@@ -30,7 +30,7 @@
LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \
- via686.o i8259.o ../bios_emulator/x86interface.o \
+ via686.o i8259.o ../bios_emulator/x86interface.o \
../bios_emulator/bios.o ../bios_emulator/glue.o \
interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \
../menu/cmd_menu.o cmd_boota.o nvram.o
diff --git a/board/MAI/AmigaOneG3SE/articiaS_pci.c b/board/MAI/AmigaOneG3SE/articiaS_pci.c
index 480dae5..45b81950 100644
--- a/board/MAI/AmigaOneG3SE/articiaS_pci.c
+++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c
@@ -368,11 +368,11 @@
if (articiaS_init_vga() == -1)
{
/* If the VGA didn't init and we have stdout set to VGA, reset to serial */
-/* s = getenv("stdout"); */
-/* if (s && strcmp(s, "vga") == 0) */
-/* { */
-/* setenv("stdout", "serial"); */
-/* } */
+/* s = getenv("stdout"); */
+/* if (s && strcmp(s, "vga") == 0) */
+/* { */
+/* setenv("stdout", "serial"); */
+/* } */
}
}
pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF);
diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c
index d4be889..ad2bcde 100644
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ b/board/MAI/AmigaOneG3SE/enet.c
@@ -41,57 +41,57 @@
/* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */
-#define TotalReset (0<<11)
-#define SelectWindow (1<<11)
-#define StartCoax (2<<11)
-#define RxDisable (3<<11)
-#define RxEnable (4<<11)
-#define RxReset (5<<11)
-#define UpStall (6<<11)
-#define UpUnstall (6<<11)+1
-#define DownStall (6<<11)+2
-#define DownUnstall (6<<11)+3
-#define RxDiscard (8<<11)
-#define TxEnable (9<<11)
-#define TxDisable (10<<11)
-#define TxReset (11<<11)
-#define FakeIntr (12<<11)
-#define AckIntr (13<<11)
-#define SetIntrEnb (14<<11)
-#define SetStatusEnb (15<<11)
-#define SetRxFilter (16<<11)
-#define SetRxThreshold (17<<11)
-#define SetTxThreshold (18<<11)
-#define SetTxStart (19<<11)
-#define StartDMAUp (20<<11)
-#define StartDMADown (20<<11)+1
+#define TotalReset (0<<11)
+#define SelectWindow (1<<11)
+#define StartCoax (2<<11)
+#define RxDisable (3<<11)
+#define RxEnable (4<<11)
+#define RxReset (5<<11)
+#define UpStall (6<<11)
+#define UpUnstall (6<<11)+1
+#define DownStall (6<<11)+2
+#define DownUnstall (6<<11)+3
+#define RxDiscard (8<<11)
+#define TxEnable (9<<11)
+#define TxDisable (10<<11)
+#define TxReset (11<<11)
+#define FakeIntr (12<<11)
+#define AckIntr (13<<11)
+#define SetIntrEnb (14<<11)
+#define SetStatusEnb (15<<11)
+#define SetRxFilter (16<<11)
+#define SetRxThreshold (17<<11)
+#define SetTxThreshold (18<<11)
+#define SetTxStart (19<<11)
+#define StartDMAUp (20<<11)
+#define StartDMADown (20<<11)+1
#define StatsEnable (21<<11)
#define StatsDisable (22<<11)
-#define StopCoax (23<<11)
-#define SetFilterBit (25<<11)
+#define StopCoax (23<<11)
+#define SetFilterBit (25<<11)
/* The SetRxFilter command accepts the following classes */
-#define RxStation 1
+#define RxStation 1
#define RxMulticast 2
#define RxBroadcast 4
-#define RxProm 8
+#define RxProm 8
/* 3Com status word defnitions */
-#define IntLatch 0x0001
-#define HostError 0x0002
-#define TxComplete 0x0004
-#define TxAvailable 0x0008
-#define RxComplete 0x0010
-#define RxEarly 0x0020
-#define IntReq 0x0040
-#define StatsFull 0x0080
-#define DMADone (1<<8)
-#define DownComplete (1<<9)
-#define UpComplete (1<<10)
-#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
-#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
+#define IntLatch 0x0001
+#define HostError 0x0002
+#define TxComplete 0x0004
+#define TxAvailable 0x0008
+#define RxComplete 0x0010
+#define RxEarly 0x0020
+#define IntReq 0x0040
+#define StatsFull 0x0080
+#define DMADone (1<<8)
+#define DownComplete (1<<9)
+#define UpComplete (1<<10)
+#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
+#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
/* Polling Registers */
@@ -100,17 +100,17 @@
/* Register window 0 offets */
-#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
-#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
+#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
+#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
#define IntrStatus 0x0E /* Valid in all windows. */
/* Register window 0 EEPROM bits */
-#define EEPROM_Read 0x80
-#define EEPROM_WRITE 0x40
-#define EEPROM_ERASE 0xC0
-#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
-#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
+#define EEPROM_Read 0x80
+#define EEPROM_WRITE 0x40
+#define EEPROM_ERASE 0xC0
+#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
+#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
/* EEPROM locations. */
@@ -129,13 +129,13 @@
/* Register window 1 offsets, the window used in normal operation */
-#define TX_FIFO 0x10
-#define RX_FIFO 0x10
-#define RxErrors 0x14
-#define RxStatus 0x18
+#define TX_FIFO 0x10
+#define RX_FIFOa 0x10
+#define RxErrors 0x14
+#define RxStatus 0x18
#define Timer 0x1A
-#define TxStatus 0x1B
-#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
+#define TxStatus 0x1B
+#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
/* Register Window 2 */
@@ -147,47 +147,47 @@
#define Wn3_MAC_Ctrl 6
#define Wn3_Options 8
-#define BFEXT(value, offset, bitcount) \
+#define BFEXT(value, offset, bitcount) \
((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
#define BFINS(lhs, rhs, offset, bitcount) \
- (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
+ (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
(((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
#define RAM_SIZE(v) BFEXT(v, 0, 3)
-#define RAM_WIDTH(v) BFEXT(v, 3, 1)
-#define RAM_SPEED(v) BFEXT(v, 4, 2)
+#define RAM_WIDTH(v) BFEXT(v, 3, 1)
+#define RAM_SPEED(v) BFEXT(v, 4, 2)
#define ROM_SIZE(v) BFEXT(v, 6, 2)
-#define RAM_SPLIT(v) BFEXT(v, 16, 2)
+#define RAM_SPLIT(v) BFEXT(v, 16, 2)
#define XCVR(v) BFEXT(v, 20, 4)
-#define AUTOSELECT(v) BFEXT(v, 24, 1)
+#define AUTOSELECT(v) BFEXT(v, 24, 1)
/* Register Window 4: Xcvr/media bits */
-#define Wn4_FIFODiag 4
-#define Wn4_NetDiag 6
+#define Wn4_FIFODiag 4
+#define Wn4_NetDiag 6
#define Wn4_PhysicalMgmt 8
-#define Wn4_Media 10
+#define Wn4_Media 10
-#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */
-#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
-#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */
-#define Media_LnkBeat 0x0800
+#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */
+#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
+#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */
+#define Media_LnkBeat 0x0800
/* Register Window 7: Bus Master control */
-#define Wn7_MasterAddr 0
-#define Wn7_MasterLen 6
-#define Wn7_MasterStatus 12
+#define Wn7_MasterAddr 0
+#define Wn7_MasterLen 6
+#define Wn7_MasterStatus 12
/* Boomerang bus master control registers. */
-#define PktStatus 0x20
+#define PktStatus 0x20
#define DownListPtr 0x24
-#define FragAddr 0x28
-#define FragLen 0x2c
+#define FragAddr 0x28
+#define FragLen 0x2c
#define TxFreeThreshold 0x2f
-#define UpPktStatus 0x30
+#define UpPktStatus 0x30
#define UpListPtr 0x38
/* The Rx and Tx descriptor lists. */
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 12acc57..d741e6b 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -190,7 +190,7 @@
{
debug ("init_ide_reset\n");
- /* Configure PSC1_4 as GPIO output for ATA reset */
+ /* Configure PSC1_4 as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
}
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index f14331b..a925b84 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -191,8 +191,7 @@
extern void pci_mpc5xxx_init(struct pci_controller *);
-void pci_init_board(void
- ) {
+void pci_init_board(void) {
pci_mpc5xxx_init(&hose);
}
#endif
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index 1f30d45..77e164b 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -191,8 +191,7 @@
extern void pci_mpc5xxx_init(struct pci_controller *);
-void pci_init_board(void
- ) {
+void pci_init_board(void) {
pci_mpc5xxx_init(&hose);
}
#endif
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index ddad1bb..700c9d9 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -316,7 +316,7 @@
{
debug ("init_ide_reset\n");
- /* Configure PSC1_4 as GPIO output for ATA reset */
+ /* Configure PSC1_4 as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
/* Deassert reset */
diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c
index bb60e73..d6a12b8 100644
--- a/board/mpc8349emds/pci.c
+++ b/board/mpc8349emds/pci.c
@@ -74,7 +74,7 @@
*/
/* Switch temporarily to I2C bus #2 */
orig_i2c_bus = i2c_get_bus_num();
- i2c_set_bus_num(1);
+ i2c_set_bus_num(1);
val8 = 0;
i2c_write(0x23, 0x6, 1, &val8, 1);