diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
new file mode 100644
index 0000000..d5388c6
--- /dev/null
+++ b/drivers/clk/qcom/clock-apq8096.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Clock drivers for Qualcomm APQ8096
+ *
+ * (C) Copyright 2017 Jorge Ramirez Ortiz <jorge.ramirez-ortiz@linaro.org>
+ *
+ * Based on Little Kernel driver, simplified
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+
+#include "clock-qcom.h"
+
+/* GPLL0 clock control registers */
+#define GPLL0_STATUS_ACTIVE		BIT(30)
+#define APCS_GPLL_ENA_VOTE_GPLL0	BIT(0)
+
+static const struct bcr_regs sdc_regs = {
+	.cfg_rcgr = SDCC2_CFG_RCGR,
+	.cmd_rcgr = SDCC2_CMD_RCGR,
+	.M = SDCC2_M,
+	.N = SDCC2_N,
+	.D = SDCC2_D,
+};
+
+static const struct pll_vote_clk gpll0_vote_clk = {
+	.status = GPLL0_STATUS,
+	.status_bit = GPLL0_STATUS_ACTIVE,
+	.ena_vote = APCS_GPLL_ENA_VOTE,
+	.vote_bit = APCS_GPLL_ENA_VOTE_GPLL0,
+};
+
+static struct vote_clk gcc_blsp2_ahb_clk = {
+	.cbcr_reg = BLSP2_AHB_CBCR,
+	.ena_vote = APCS_CLOCK_BRANCH_ENA_VOTE,
+	.vote_bit = BIT(15),
+};
+
+static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
+{
+	int div = 3;
+
+	clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
+	clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
+			     CFG_CLK_SRC_GPLL0);
+	clk_enable_gpll0(priv->base, &gpll0_vote_clk);
+	clk_enable_cbc(priv->base + SDCC2_APPS_CBCR);
+
+	return rate;
+}
+
+static const struct bcr_regs uart2_regs = {
+	.cfg_rcgr = BLSP2_UART2_APPS_CFG_RCGR,
+	.cmd_rcgr = BLSP2_UART2_APPS_CMD_RCGR,
+	.M = BLSP2_UART2_APPS_M,
+	.N = BLSP2_UART2_APPS_N,
+	.D = BLSP2_UART2_APPS_D,
+};
+
+static int clk_init_uart(struct msm_clk_priv *priv)
+{
+	/* Enable AHB clock */
+	clk_enable_vote_clk(priv->base, &gcc_blsp2_ahb_clk);
+
+	/* 7372800 uart block clock @ GPLL0 */
+	clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 192, 15625,
+			     CFG_CLK_SRC_GPLL0);
+
+	/* Vote for gpll0 clock */
+	clk_enable_gpll0(priv->base, &gpll0_vote_clk);
+
+	/* Enable core clk */
+	clk_enable_cbc(priv->base + BLSP2_UART2_APPS_CBCR);
+
+	return 0;
+}
+
+ulong msm_set_rate(struct clk *clk, ulong rate)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {
+	case 0: /* SDC1 */
+		return clk_init_sdc(priv, rate);
+		break;
+	case 4: /*UART2*/
+		return clk_init_uart(priv);
+	default:
+		return 0;
+	}
+}
+
+int msm_enable(struct clk *clk)
+{
+	return 0;
+}