spi: spi-uclass: Add new spi_get_bus_and_cs() implementation
Move legacy spi_get_bus_and_cs() code to _spi_get_bus_and_cs().
Add new spi_get_bus_and_cs() implementation which rely on DT
for speed and mode and don't need any drv_name nor dev_name
parameters. This will prepare the ground for next patch.
Update all callers to use _spi_get_bus_and_cs() to keep the
same behavior.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index a4738b3..68bc315 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -149,9 +149,9 @@
struct udevice *dev;
int ret;
- ret = spi_get_bus_and_cs(0, 1, 1000000, SPI_CPHA | SPI_CPOL,
- "spi_generic_drv", "moxtet@1", &dev,
- &slave);
+ ret = _spi_get_bus_and_cs(0, 1, 1000000, SPI_CPHA | SPI_CPOL,
+ "spi_generic_drv", "moxtet@1", &dev,
+ &slave);
if (ret)
goto fail;
diff --git a/cmd/spi.c b/cmd/spi.c
index 6dc3267..454ebe3 100644
--- a/cmd/spi.c
+++ b/cmd/spi.c
@@ -46,8 +46,8 @@
str = strdup(name);
if (!str)
return -ENOMEM;
- ret = spi_get_bus_and_cs(bus, cs, freq, mode, "spi_generic_drv",
- str, &dev, &slave);
+ ret = _spi_get_bus_and_cs(bus, cs, freq, mode, "spi_generic_drv",
+ str, &dev, &slave);
if (ret)
return ret;
#else
diff --git a/drivers/mtd/spi/sf-uclass.c b/drivers/mtd/spi/sf-uclass.c
index 63d1629..b45ba54 100644
--- a/drivers/mtd/spi/sf-uclass.c
+++ b/drivers/mtd/spi/sf-uclass.c
@@ -74,7 +74,7 @@
snprintf(name, sizeof(name), "spi_flash@%d:%d", busnum, cs);
str = strdup(name);
#endif
- ret = spi_get_bus_and_cs(busnum, cs, max_hz, spi_mode,
+ ret = _spi_get_bus_and_cs(busnum, cs, max_hz, spi_mode,
"jedec_spi_nor", str, &bus, &slave);
if (ret)
return ret;
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index f8ec312..f2791c4 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -340,11 +340,67 @@
return ret;
}
-int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
- const char *drv_name, const char *dev_name,
- struct udevice **busp, struct spi_slave **devp)
+int spi_get_bus_and_cs(int busnum, int cs, struct udevice **busp,
+ struct spi_slave **devp)
{
struct udevice *bus, *dev;
+ struct dm_spi_bus *bus_data;
+ struct spi_slave *slave;
+ int ret;
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ ret = uclass_first_device_err(UCLASS_SPI, &bus);
+#else
+ ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
+#endif
+ if (ret) {
+ log_err("Invalid bus %d (err=%d)\n", busnum, ret);
+ return ret;
+ }
+ ret = spi_find_chip_select(bus, cs, &dev);
+ if (ret) {
+ dev_err(bus, "Invalid chip select %d:%d (err=%d)\n", busnum, cs, ret);
+ return ret;
+ }
+
+ if (!device_active(dev)) {
+ struct spi_slave *slave;
+
+ ret = device_probe(dev);
+ if (ret)
+ goto err;
+ slave = dev_get_parent_priv(dev);
+ slave->dev = dev;
+ }
+
+ slave = dev_get_parent_priv(dev);
+ bus_data = dev_get_uclass_priv(bus);
+
+ /*
+ * In case the operation speed is not yet established by
+ * dm_spi_claim_bus() ensure the bus is configured properly.
+ */
+ if (!bus_data->speed) {
+ ret = spi_claim_bus(slave);
+ if (ret)
+ goto err;
+ }
+ *busp = bus;
+ *devp = slave;
+
+ return 0;
+
+err:
+ log_debug("%s: Error path, device '%s'\n", __func__, dev->name);
+
+ return ret;
+}
+
+int _spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
+ const char *drv_name, const char *dev_name,
+ struct udevice **busp, struct spi_slave **devp)
+{
+ struct udevice *bus, *dev;
struct dm_spi_slave_plat *plat;
struct dm_spi_bus *bus_data;
struct spi_slave *slave;
@@ -453,8 +509,8 @@
struct udevice *dev;
int ret;
- ret = spi_get_bus_and_cs(busnum, cs, speed, mode, NULL, 0, &dev,
- &slave);
+ ret = _spi_get_bus_and_cs(busnum, cs, speed, mode, NULL, 0, &dev,
+ &slave);
if (ret)
return NULL;
diff --git a/drivers/usb/gadget/max3420_udc.c b/drivers/usb/gadget/max3420_udc.c
index a16095f..fa655c9 100644
--- a/drivers/usb/gadget/max3420_udc.c
+++ b/drivers/usb/gadget/max3420_udc.c
@@ -830,8 +830,8 @@
cs = slave_pdata->cs;
speed = slave_pdata->max_hz;
mode = slave_pdata->mode;
- spi_get_bus_and_cs(busnum, cs, speed, mode, "spi_generic_drv",
- NULL, &spid, &udc->slave);
+ _spi_get_bus_and_cs(busnum, cs, speed, mode, false, "spi_generic_drv",
+ NULL, &spid, &udc->slave);
udc->dev = dev;
udc->gadget.ep0 = &udc->ep[0].ep_usb;
diff --git a/include/spi.h b/include/spi.h
index fa9ab12..9a8c1fb 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -572,6 +572,23 @@
* Given a bus number and chip select, this finds the corresponding bus
* device and slave device.
*
+ * @busnum: SPI bus number
+ * @cs: Chip select to look for
+ * @busp: Returns bus device
+ * @devp: Return slave device
+ * @return 0 if found, -ve on error
+ */
+int spi_get_bus_and_cs(int busnum, int cs,
+ struct udevice **busp, struct spi_slave **devp);
+
+/**
+ * _spi_get_bus_and_cs() - Find and activate bus and slave devices by number
+ * As spi_flash_probe(), This is an old-style function. We should remove
+ * it when all SPI flash drivers use dm
+ *
+ * Given a bus number and chip select, this finds the corresponding bus
+ * device and slave device.
+ *
* If no such slave exists, and drv_name is not NULL, then a new slave device
* is automatically bound on this chip select with requested speed and mode.
*
@@ -588,7 +605,7 @@
* @devp: Return slave device
* Return: 0 if found, -ve on error
*/
-int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
+int _spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
const char *drv_name, const char *dev_name,
struct udevice **busp, struct spi_slave **devp);
diff --git a/test/dm/spi.c b/test/dm/spi.c
index ee4ad3a..7ab0820 100644
--- a/test/dm/spi.c
+++ b/test/dm/spi.c
@@ -46,19 +46,19 @@
/* This finds nothing because we removed the device */
ut_asserteq(-ENODEV, spi_find_bus_and_cs(busnum, cs, &bus, &dev));
- ut_asserteq(-ENODEV, spi_get_bus_and_cs(busnum, cs, speed, mode,
- NULL, 0, &bus, &slave));
+ ut_asserteq(-ENODEV, _spi_get_bus_and_cs(busnum, cs, speed, mode,
+ NULL, 0, &bus, &slave));
/*
* This forces the device to be re-added, but there is no emulation
* connected so the probe will fail. We require that bus is left
- * alone on failure, and that the spi_get_bus_and_cs() does not add
+ * alone on failure, and that the _spi_get_bus_and_cs() does not add
* a 'partially-inited' device.
*/
ut_asserteq(-ENODEV, spi_find_bus_and_cs(busnum, cs, &bus, &dev));
- ut_asserteq(-ENOENT, spi_get_bus_and_cs(busnum, cs, speed, mode,
- "jedec_spi_nor", "name", &bus,
- &slave));
+ ut_asserteq(-ENOENT, _spi_get_bus_and_cs(busnum, cs, speed, mode,
+ "jedec_spi_nor", "name", &bus,
+ &slave));
sandbox_sf_unbind_emul(state_get_current(), busnum, cs);
ut_assertok(spi_cs_info(bus, cs, &info));
ut_asserteq_ptr(NULL, info.dev);
@@ -67,8 +67,8 @@
ut_assertok(sandbox_sf_bind_emul(state, busnum, cs, bus, node,
"name"));
ut_assertok(spi_find_bus_and_cs(busnum, cs, &bus, &dev));
- ut_assertok(spi_get_bus_and_cs(busnum, cs, speed, mode,
- "jedec_spi_nor", "name", &bus, &slave));
+ ut_assertok(_spi_get_bus_and_cs(busnum, cs, speed, mode,
+ "jedec_spi_nor", "name", &bus, &slave));
ut_assertok(spi_cs_info(bus, cs, &info));
ut_asserteq_ptr(info.dev, slave->dev);
@@ -76,8 +76,9 @@
/* We should be able to add something to another chip select */
ut_assertok(sandbox_sf_bind_emul(state, busnum, cs_b, bus, node,
"name"));
- ut_asserteq(-EINVAL, spi_get_bus_and_cs(busnum, cs_b, speed, mode,
- "jedec_spi_nor", "name", &bus, &slave));
+ ut_asserteq(-EINVAL, _spi_get_bus_and_cs(busnum, cs_b, speed, mode,
+ "jedec_spi_nor", "name", &bus,
+ &slave));
ut_asserteq(-EINVAL, spi_cs_info(bus, cs_b, &info));
ut_asserteq_ptr(NULL, info.dev);
@@ -145,11 +146,11 @@
const int busnum = 0, cs_a = 0, cs_b = 1, mode = 0;
/* Get spi slave on CS0 */
- ut_assertok(spi_get_bus_and_cs(busnum, cs_a, 1000000, mode, NULL, 0,
- &bus, &slave_a));
+ ut_assertok(_spi_get_bus_and_cs(busnum, cs_a, 1000000, mode, NULL, 0,
+ &bus, &slave_a));
/* Get spi slave on CS1 */
- ut_assertok(spi_get_bus_and_cs(busnum, cs_b, 1000000, mode, NULL, 0,
- &bus, &slave_b));
+ ut_assertok(_spi_get_bus_and_cs(busnum, cs_b, 1000000, mode, NULL, 0,
+ &bus, &slave_b));
/* Different max_hz, different mode. */
ut_assert(slave_a->max_hz != slave_b->max_hz);
@@ -182,8 +183,8 @@
const char dout[5] = {0x9f};
unsigned char din[5];
- ut_assertok(spi_get_bus_and_cs(busnum, cs, 1000000, mode, NULL, 0,
- &bus, &slave));
+ ut_assertok(_spi_get_bus_and_cs(busnum, cs, 1000000, mode, NULL, 0,
+ &bus, &slave));
ut_assertok(spi_claim_bus(slave));
ut_assertok(spi_xfer(slave, 40, dout, din,
SPI_XFER_BEGIN | SPI_XFER_END));