ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)
Introduce helper macro UART_BASE_ADDR(n), which returns Nth UART base
address. Convert all board configurations to this new macro. This is the
first step toward switching CONFIG_MXC_UART_BASE to Kconfig. This is a
clean up, no functional change.
The new macro contains compile-time test to verify N is in suitable
range. The test works such that it multiplies constant N by constant
double-negation of size of a non-empty structure, i.e. it multiplies
constant N by constant 1 in each successful compilation case.
The non-empty structure may contain C11 _Static_assert(), make use of
this and place the kernel variant of static assert in there, so that
it performs the compile-time check for N in the correct range. Note
that it is not possible to directly use static_assert in compound
statements, hence this convoluted construct.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h
index b2a8ad7..1da7552 100644
--- a/arch/arm/include/asm/arch-imx8m/imx-regs.h
+++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h
@@ -48,6 +48,16 @@
#ifdef CONFIG_IMX8MM
#define USDHC3_BASE_ADDR 0x30B60000
#endif
+#define UART_BASE_ADDR(n) ( \
+ !!sizeof(struct { \
+ static_assert((n) >= 1 && (n) <= 4); \
+ int pad; \
+ }) * ( \
+ (n) == 1 ? UART1_BASE_ADDR : \
+ (n) == 2 ? UART2_BASE_ADDR : \
+ (n) == 3 ? UART3_BASE_ADDR : \
+ UART4_BASE_ADDR) \
+ )
#define TZASC_BASE_ADDR 0x32F80000
diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h
index c20c32b..6074658 100644
--- a/include/configs/imx8mm-cl-iot-gate.h
+++ b/include/configs/imx8mm-cl-iot-gate.h
@@ -145,7 +145,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h
index 7c17f14..573ddaf 100644
--- a/include/configs/imx8mm_beacon.h
+++ b/include/configs/imx8mm_beacon.h
@@ -91,7 +91,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
index 42b7848..bd10406 100644
--- a/include/configs/imx8mm_evk.h
+++ b/include/configs/imx8mm_evk.h
@@ -68,7 +68,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h
index f521add..b9b24a8 100644
--- a/include/configs/imx8mm_icore_mx8mm.h
+++ b/include/configs/imx8mm_icore_mx8mm.h
@@ -66,7 +66,7 @@
#define CONFIG_SYS_BOOTM_LEN SZ_256M
/* UART */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h
index 1b26e02..f3dad25 100644
--- a/include/configs/imx8mm_venice.h
+++ b/include/configs/imx8mm_venice.h
@@ -102,7 +102,7 @@
#define CONFIG_SYS_BOOTM_LEN SZ_256M
/* UART */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h
index 41ce3c1..79c6b10 100644
--- a/include/configs/imx8mn_beacon.h
+++ b/include/configs/imx8mn_beacon.h
@@ -107,7 +107,7 @@
#define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */
#endif
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
index 0341322..805ae2a 100644
--- a/include/configs/imx8mn_evk.h
+++ b/include/configs/imx8mn_evk.h
@@ -75,7 +75,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mn_var_som.h b/include/configs/imx8mn_var_som.h
index 318289b..0035889 100644
--- a/include/configs/imx8mn_var_som.h
+++ b/include/configs/imx8mn_var_som.h
@@ -64,7 +64,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE SZ_1G /* 1GB DDR */
-#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(4)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h
index a482677..dcb5baf 100644
--- a/include/configs/imx8mn_venice.h
+++ b/include/configs/imx8mn_venice.h
@@ -98,7 +98,7 @@
#define CONFIG_SYS_BOOTM_LEN SZ_256M
/* UART */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index cc8d65c..908ed76 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -80,7 +80,7 @@
#define PHYS_SDRAM_2 0x100000000
#define PHYS_SDRAM_2_SIZE 0xC0000000 /* 3 GB */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h
index c5dd545..c0f2824 100644
--- a/include/configs/imx8mp_rsb3720.h
+++ b/include/configs/imx8mp_rsb3720.h
@@ -169,7 +169,7 @@
#define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */
#endif
-#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
index 989486a..6eecfc8 100644
--- a/include/configs/imx8mq_cm.h
+++ b/include/configs/imx8mq_cm.h
@@ -71,7 +71,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x40000000 /* 1 GB DDR */
-#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index f7929e5..8596d99 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -78,7 +78,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */
-#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
index f641011..9cf779b 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -106,7 +106,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */
-#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h
index 1b429f7..8b2a10d 100644
--- a/include/configs/kontron-sl-mx8mm.h
+++ b/include/configs/kontron-sl-mx8mm.h
@@ -28,7 +28,7 @@
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Board and environment settings */
-#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3)
#define CONFIG_HOSTNAME "kontron-mx8mm"
#ifdef CONFIG_USB_EHCI_HCD
diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h
index e8e9292..182ee59 100644
--- a/include/configs/kontron_pitx_imx8m.h
+++ b/include/configs/kontron_pitx_imx8m.h
@@ -84,7 +84,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */
-#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3)
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index 71f0c42..46fadd5 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -84,7 +84,7 @@
#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
/* UART */
-#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
index 0c963b6..eb92c42 100644
--- a/include/configs/phycore_imx8mp.h
+++ b/include/configs/phycore_imx8mp.h
@@ -84,7 +84,7 @@
#define PHYS_SDRAM_SIZE 0x80000000
/* UART */
-#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 9584527..567b06c 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -85,7 +85,7 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2 GiB DDR */
-#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index da3dc95..130a1ed 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -84,7 +84,7 @@
#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
/* UART */
-#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index 7b74077..33cfd3d 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -101,7 +101,7 @@
#define PHYS_SDRAM_2_SIZE (SZ_4G + SZ_1G)
/* UART */
-#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K