Merge with /home/hs/SC3/u-boot
Some code cleanup.
diff --git a/CHANGELOG b/CHANGELOG
index e0b9be9..5bc95fa 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,314 @@
+commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 15 09:46:29 2007 +0100
+
+ [PATCH] Fix 440SPe rev B detection from previous patch
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a443d31410c571ee8f970da819a44d698fdd6b1f
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Sun Jan 14 13:35:31 2007 +0100
+
+ [FIX] correct I2C Writes for the LM81 Sensor.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0bba5452835f19a61204edcda3a58112fd8e2208
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Jan 13 11:17:10 2007 +0100
+
+ Undo commit 3033ebb2: reset command does not take any arguments
+
+ Haiying Wang's modification to the reset command was broken, undo it.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 95981778cff0038fd9941044d6a3eda810e33258
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 08:01:03 2007 +0100
+
+ [PATCH] Update 440SP(e) cpu revisions
+
+ Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 07:59:56 2007 +0100
+
+ [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
+
+ Now the board revision and the current PCI bus speed are printed after
+ the board message.
+
+ Also the EBC initialising is now done via defines in the board config
+ file.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 36adff362c2c0141ff8a810d42a7e478f779130f
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 07:59:19 2007 +0100
+
+ [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
+
+ Now the board revision and the current PCI bus speed are printed after
+ the board message.
+
+ Also the EBC initialising is now done via defines in the board config
+ file.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 07:57:51 2007 +0100
+
+ [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
+
+ Now the board revision and the current PCI bus speed are printed after
+ the board message.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
+Author: Reinhard Thies <Reinhard.Thies@web.de>
+Date: Wed Jan 10 14:41:14 2007 +0100
+
+ Adjusted default environment for cam5200 board.
+
+commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jan 10 15:35:52 2007 +0100
+
+ Update CHANGELOG
+
+commit 787fa15860a57833e50bd30555079a9cd4e519b8
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jan 10 01:28:39 2007 +0100
+
+ Fix auto_update for MCC200 board.
+
+ The invocation of do_auto_update() is moved to the end of the
+ misc_init_r() function, after the flash mappings have been
+ initialized. Please find attached a patch that implements that
+ change.
+
+ Also correct the decoding of the keypad status. With this update, the
+ key that will trigger the update is Column 2, Row 2.
+
+commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Jan 10 00:26:15 2007 +0100
+
+ CAM5200 flash driver modifications:
+ - use CFI driver (replaces custom flash driver) for main 'cam5200' target
+ - add second build target 'cam5200_niosflash' which still uses custom driver
+
+commit 67fea022fa957f59653b5238c7496f80a6b70432
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 16:02:48 2007 +0100
+
+ SPC1920: cleanup memory contoller setup
+
+commit 8fc2102faa23593c80381437c09f7745a14deb40
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:14 2007 +0100
+
+ Fix the cpu speed setup to work with all boards.
+
+commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:13 2007 +0100
+
+ SPC1920: add support for the FM18L08 Ramtron FRAM
+
+commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:13 2007 +0100
+
+ SPC1920: update the HPI register addresses to work with the second
+ generation of hardware
+
+commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:13 2007 +0100
+
+ Miscellanious spc1920 related cleanups
+
+commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:12 2007 +0100
+
+ SPC1920 GO/NOGO led should be set to color red in U-Boot
+
+commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:12 2007 +0100
+
+ Add support for the DS3231 RTC
+
+commit 8139567b60d678584b05f0718a681f2047c5e14f
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:11 2007 +0100
+
+ SMC1 uses external CLK4 instead of BRG on spc1920
+
+commit d8d9de1a02fbd880b613d607143d1f57342affc7
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:10 2007 +0100
+
+ Update the SPC1920 CMB PLD driver
+
+commit 3f34f869162750e5e999fd140f884f5de952bcfe
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:10 2007 +0100
+
+ Add / enable I2C support on the spc1920 board
+
+commit d28707dbce1e9ac2017ad051da4133bf22b4204f
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:10 2007 +0100
+
+ Add support for the tms320671x host port interface (HPI)
+
+commit f4eb54529bb3664c3a562e488b460fe075f79d67
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Jan 7 00:13:11 2007 +0100
+
+ Prepare for release 1.2.0
+
+commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:58:09 2007 +0100
+
+ [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
+
+ This patch fixes a problem with an incorrect setup for the refresh
+ timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f16c1da9577f06c5fc08651a4065537407de4635
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:56:13 2007 +0100
+
+ [PATCH] Update ALPR board files
+
+ This update brings the ALPR board support to the newest version.
+ It also fixes a problem with the NAND driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cd1d937f90250a32988c37b2b4af8364d25de8ed
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 11:46:05 2007 +0100
+
+ [PATCH] nand: Fix problem with oobsize calculation
+
+ Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
+
+ The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
+ returns a 0x15. In the code fragment below bits [1:0] determine the
+ page size, it is ANDed via "(extid & 0x3)" then shifted out. The
+ next field is also ANDed with 0x3. However this is a one bit field
+ as defined in the Hynix and Samsung parts in the 4th ID byte that
+ determins the oobsize, not a two bit field. It works on Samsung as
+ bits[3:2] are 01. However for the Hynix there is a 11 in these two
+ bits, so the oob size gets messed up.
+
+ I checked the correct linux code and the suggested fix from Brian is
+ also available in the linux nand mtd driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:40:36 2007 +0100
+
+ [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
+
+ This fix will make the MAL burst disabling patch for the Linux
+ EMAC driver obsolete.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 023889838282b6237b401664f22dd22dfba2c066
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:38:05 2007 +0100
+
+ [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
+
+ This code will optimize the DDR2 controller setup on a board specific
+ basis.
+
+ Note: This code doesn't work right now on the NAND booting image for the
+ Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cce4acbb68398634b8d011ed7bb0d12269c84230
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Dec 28 19:08:21 2006 +0100
+
+ Few V38B changes:
+ - fix a typo in V38B config file
+ - move watchdog initialisation earlier in the boot process
+ - add "wdt=off" to default kernel command line (disables kernel watchdog)
+
+commit 92eb729bad876725aeea908d2addba0800620840
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Dec 27 01:26:13 2006 +0100
+
+ Fix bug in adaption of Stefano Babic's CFI driver patch.
+
+commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Dec 24 01:42:57 2006 +0100
+
+ Minor code cleanup.
+
+commit d784fdb05900ada3686d5778783e1fb328e9fb66
+Author: Stefano Babic <sbabic@denx.de>
+Date: Tue Dec 12 00:22:42 2006 +0100
+
+ Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
+
+commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 22 14:29:40 2006 +0100
+
+ [PATCH] Fix sequoia flash autodetection (finally correct)
+
+ Now 32MByte and 64MByte FLASH is know to work and other
+ configurations should work too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 82e5236a8b719543643fd26d5827938ab2b94818
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Fri Dec 22 10:30:26 2006 +0100
+
+ Minor code cleanup; update CHANGELOG.
+
+commit fa23044564091f05d9695beb7b5b9a931e7f41a4
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Dec 21 17:17:02 2006 +0100
+
+ Added support for the TQM8272 board from TQ
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Dec 21 16:14:48 2006 +0100
+
+ [PATCH] Add support for the UC101 board from MAN.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
commit c84bad0ef60e7055ab0bd49b93069509cecc382a
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Wed Dec 20 00:29:43 2006 +0100
@@ -210,7 +521,7 @@
[PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
- arguments to bootm. It removes the getenv("disable_of") test that used
+ arguments to bootm. It removes the getenv("disable_of") test that used
to be used for this purpose.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
@@ -908,7 +1219,7 @@
If a Multi-Image file contains a third image we try to use it as a
device tree. The device tree image is assumed to be uncompressed in the
- image file. We automatically allocate space for the device tree in memory
+ image file. We automatically allocate space for the device tree in memory
and provide an 8k pad to allow more than a reasonable amount of growth.
Additionally, a device tree that was contained in flash will now automatically
diff --git a/Makefile b/Makefile
index 28c6aec..01349f1 100644
--- a/Makefile
+++ b/Makefile
@@ -22,8 +22,8 @@
#
VERSION = 1
-PATCHLEVEL = 1
-SUBLEVEL = 6
+PATCHLEVEL = 2
+SUBLEVEL = 0
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
@@ -557,6 +557,7 @@
@$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
cam5200_config \
+cam5200_niosflash_config \
fo300_config \
MiniFAP_config \
TQM5200S_config \
@@ -574,6 +575,10 @@
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
echo "... TQM5200S on Cam5200" ; \
}
+ @[ -z "$(findstring niosflash,$@)" ] || \
+ { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \
+ echo "... with NIOS flash driver" ; \
+ }
@[ -z "$(findstring fo300,$@)" ] || \
{ echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \
echo "... TQM5200 on FO300" ; \
@@ -597,6 +602,8 @@
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
+uc101_config: unconfig
+ @$(MKCONFIG) uc101 ppc mpc5xxx uc101
#########################################################################
## MPC8xx Systems
@@ -1193,7 +1200,7 @@
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-SOLIDCARD3_config:unconfig
+solidcard3_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx solidcard3
sycamore_config: unconfig
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 3d4ac85..45bcd4b 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -90,7 +90,7 @@
/*
* BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
* speed up boot process. It is patched after relocation to enable SA_I
- */
+ */
#ifndef CONFIG_NAND_SPL
tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
#else
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index 53f728d..77f1438 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -1,5 +1,12 @@
/*
* (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
@@ -18,10 +25,352 @@
* MA 02111-1307 USA
*/
+/* define DEBUG for debug output */
+#undef DEBUG
+
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <ppc440.h>
+#include "sdram.h"
+
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
+ defined(CONFIG_DDR_DATA_EYE)
+/*-----------------------------------------------------------------------------+
+ * wait_for_dlllock.
+ +----------------------------------------------------------------------------*/
+static int wait_for_dlllock(void)
+{
+ unsigned long val;
+ int wait = 0;
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_17);
+ val = DDR0_17_DLLLOCKREG_UNLOCKED;
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
+ /* dlllockreg bit on */
+ return 0;
+ else
+ wait++;
+ }
+ debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+ debug("Waiting for dlllockreg bit to raise\n");
+
+ return -1;
+}
+#endif
+
+#if defined(CONFIG_DDR_DATA_EYE)
+/*-----------------------------------------------------------------------------+
+ * wait_for_dram_init_complete.
+ +----------------------------------------------------------------------------*/
+int wait_for_dram_init_complete(void)
+{
+ unsigned long val;
+ int wait = 0;
+
+ /* --------------------------------------------------------------+
+ * Wait for 'DRAM initialization complete' bit in status register
+ * -------------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_00);
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+ /* 'DRAM initialization complete' bit */
+ return 0;
+ else
+ wait++;
+ }
+
+ debug("DRAM initialization complete bit in status register did not rise\n");
+
+ return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+/*-----------------------------------------------------------------------------+
+ * denali_core_search_data_eye.
+ +----------------------------------------------------------------------------*/
+void denali_core_search_data_eye(unsigned long memory_size)
+{
+ int k, j;
+ u32 val;
+ u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+ u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+ u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+ u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+ volatile u32 *ram_pointer;
+ u32 test[NUM_TRIES] = {
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+ ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
+
+ for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+ /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'wr_dqs_shift'
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ * ----------------------------------------------------------*/
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+
+ passing_cases = 0;
+
+ for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
+ /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
+ /* -----------------------------------------------------------+
+ * Set 'dll_dqs_delay_X'.
+ * ----------------------------------------------------------*/
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /* -----------------------------------------------------------+
+ * Assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ if (wait_for_dlllock() != 0) {
+ printf("dlllock did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+ wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ ppcMsync();
+ ppcMbar();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+ wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+
+ /* write values */
+ for (j=0; j<NUM_TRIES; j++) {
+ ram_pointer[j] = test[j];
+
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+ }
+
+ /* read values back */
+ for (j=0; j<NUM_TRIES; j++) {
+ for (k=0; k<NUM_READS; k++) {
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+ if (ram_pointer[j] != test[j])
+ break;
+ }
+
+ /* read error */
+ if (k != NUM_READS)
+ break;
+ }
+
+ /* See if the dll_dqs_delay_X value passed.*/
+ if (j < NUM_TRIES) {
+ /* Failed */
+ passing_cases = 0;
+ /* break; */
+ } else {
+ /* Passed */
+ if (passing_cases == 0)
+ dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
+ passing_cases++;
+ if (passing_cases >= max_passing_cases) {
+ max_passing_cases = passing_cases;
+ wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
+ dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
+ dll_dqs_delay_X_end_window = dll_dqs_delay_X;
+ }
+ }
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+
+ } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+ /* -----------------------------------------------------------+
+ * Largest passing window is now detected.
+ * ----------------------------------------------------------*/
+
+ /* Compute dll_dqs_delay_X value */
+ dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
+ wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+ debug("DQS calibration - Window detected:\n");
+ debug("max_passing_cases = %d\n", max_passing_cases);
+ debug("wr_dqs_shift = %d\n", wr_dqs_shift);
+ debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
+ debug("dll_dqs_delay_X window = %d - %d\n",
+ dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'wr_dqs_shift'
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_09=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ * ----------------------------------------------------------*/
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_22=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dll_dqs_delay_X'.
+ * ----------------------------------------------------------*/
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_17=0x%08lx\n", val);
+
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_18=0x%08lx\n", val);
+
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_19=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ if (wait_for_dlllock() != 0) {
+ printf("dlllock did not occur !!!\n");
+ hang();
+ }
+ ppcMsync();
+ ppcMbar();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* CONFIG_DDR_DATA_EYE */
+
/*************************************************************************
*
* initdram -- 440EPx's DDR controller is a DENALI Core
@@ -30,8 +379,6 @@
long int initdram (int board_type)
{
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
- volatile ulong val;
-
mtsdram(DDR0_02, 0x00000000);
mtsdram(DDR0_00, 0x0000190A);
@@ -64,14 +411,15 @@
mtsdram(DDR0_44, 0x00000005);
mtsdram(DDR0_02, 0x00000001);
- /*
- * Wait for DCC master delay line to finish calibration
- */
- mfsdram(DDR0_17, val);
- while (((val >> 8) & 0x000007f) == 0) {
- mfsdram(DDR0_17, val);
- }
+ wait_for_dlllock();
#endif /* #ifndef CONFIG_NAND_U_BOOT */
+#ifdef CONFIG_DDR_DATA_EYE
+ /* -----------------------------------------------------------+
+ * Perform data eye search if requested.
+ * ----------------------------------------------------------*/
+ denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
+#endif
+
return (CFG_MBYTES_SDRAM << 20);
}
diff --git a/board/amcc/sequoia/sdram.h b/board/amcc/sequoia/sdram.h
new file mode 100644
index 0000000..7f847aa
--- /dev/null
+++ b/board/amcc/sequoia/sdram.h
@@ -0,0 +1,505 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPD_SDRAM_DENALI_H_
+#define _SPD_SDRAM_DENALI_H_
+
+#define ppcMsync sync
+#define ppcMbar eieio
+
+/* General definitions */
+#define MAX_SPD_BYTE 128 /* highest SPD byte # to read */
+#define DENALI_REG_NUMBER 45 /* 45 Regs in PPC440EPx Denali Core */
+#define SUPPORTED_DIMMS_NB 7 /* Number of supported DIMM modules types */
+#define SDRAM_NONE 0 /* No DIMM detected in Slot */
+#define MAXRANKS 2 /* 2 ranks maximum */
+
+/* Supported PLB Frequencies */
+#define PLB_FREQ_133MHZ 133333333
+#define PLB_FREQ_152MHZ 152000000
+#define PLB_FREQ_160MHZ 160000000
+#define PLB_FREQ_166MHZ 166666666
+
+/* Denali Core Registers */
+#define SDRAM_DCR_BASE 0x10
+
+#define DDR_DCR_BASE 0x10
+#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
+#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
+
+/*-----------------------------------------------------------------------------+
+ | Values for ddrcfga register - indirect addressing of these regs
+ +-----------------------------------------------------------------------------*/
+
+#define DDR0_00 0x00
+#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
+#define DDR0_00_INT_ACK_ALL 0x7F000000
+#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+/* Status */
+#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
+/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT0 0x00010000
+/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT1 0x00020000
+/* Bit2. Single correctable ECC event detected */
+#define DDR0_00_INT_STATUS_BIT2 0x00040000
+/* Bit3. Multiple correctable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT3 0x00080000
+/* Bit4. Single uncorrectable ECC event detected. */
+#define DDR0_00_INT_STATUS_BIT4 0x00100000
+/* Bit5. Multiple uncorrectable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT5 0x00200000
+/* Bit6. DRAM initialization complete. */
+#define DDR0_00_INT_STATUS_BIT6 0x00400000
+/* Bit7. Logical OR of all lower bits. */
+#define DDR0_00_INT_STATUS_BIT7 0x00800000
+
+#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
+#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
+#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_01 0x01
+#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
+#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
+#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
+#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_01_INT_MASK_MASK 0x000000FF
+#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
+#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
+#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
+
+#define DDR0_02 0x02
+#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
+#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24)
+#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2)
+#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
+#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
+#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_02_START_MASK 0x00000001
+#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+#define DDR0_02_START_OFF 0x00000000
+#define DDR0_02_START_ON 0x00000001
+
+#define DDR0_03 0x03
+#define DDR0_03_BSTLEN_MASK 0x07000000
+#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_03_CASLAT_MASK 0x00070000
+#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
+#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_03_INITAREF_MASK 0x0000000F
+#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_04 0x04
+#define DDR0_04_TRC_MASK 0x1F000000
+#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_04_TRRD_MASK 0x00070000
+#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_04_TRTP_MASK 0x00000700
+#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
+
+#define DDR0_05 0x05
+#define DDR0_05_TMRD_MASK 0x1F000000
+#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_05_TEMRS_MASK 0x00070000
+#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_05_TRP_MASK 0x00000F00
+#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_05_TRAS_MIN_MASK 0x000000FF
+#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
+
+#define DDR0_06 0x06
+#define DDR0_06_WRITEINTERP_MASK 0x01000000
+#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_06_TWTR_MASK 0x00070000
+#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_06_TDLL_MASK 0x0000FF00
+#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_06_TRFC_MASK 0x0000007F
+#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_07 0x07
+#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
+#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_07_TFAW_MASK 0x001F0000
+#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
+#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_07_AREFRESH_MASK 0x00000001
+#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_08 0x08
+#define DDR0_08_WRLAT_MASK 0x07000000
+#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_08_TCPD_MASK 0x00FF0000
+#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_08_DQS_N_EN_MASK 0x00000100
+#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
+#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_09 0x09
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_09_RTT_0_MASK 0x00030000
+#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
+#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_10 0x0A
+#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
+#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_10_CS_MAP_MASK 0x00000300
+#define DDR0_10_CS_MAP_NO_MEM 0x00000000
+#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
+#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
+#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
+
+#define DDR0_11 0x0B
+#define DDR0_11_SREFRESH_MASK 0x01000000
+#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_11_TXSNR_MASK 0x00FF0000
+#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_11_TXSR_MASK 0x0000FF00
+#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
+
+#define DDR0_12 0x0C
+#define DDR0_12_TCKE_MASK 0x0000007
+#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0)
+#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7)
+
+#define DDR0_13 0x0D
+
+#define DDR0_14 0x0E
+#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
+#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_14_REDUC_MASK 0x00010000
+#define DDR0_14_REDUC_64BITS 0x00000000
+#define DDR0_14_REDUC_32BITS 0x00010000
+#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
+#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+
+#define DDR0_15 0x0F
+
+#define DDR0_16 0x10
+
+#define DDR0_17 0x11
+#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
+#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
+#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
+#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
+#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
+#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+
+#define DDR0_18 0x12
+#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
+#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
+#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
+#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
+#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
+#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_19 0x13
+#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
+#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
+#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
+#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
+#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
+#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_20 0x14
+#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
+#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
+#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
+#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
+#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_21 0x15
+#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
+#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
+#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
+#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
+#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_22 0x16
+/* ECC */
+#define DDR0_22_CTRL_RAW_MASK 0x03000000
+#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */
+#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/
+#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */
+#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */
+#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
+#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
+#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_23 0x17
+#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
+#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
+#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
+#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
+#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_24 0x18
+#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
+#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
+#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
+#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
+#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0)
+#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3)
+
+#define DDR0_25 0x19
+#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
+#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
+#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_26 0x1A
+#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
+#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_26_TREF_MASK 0x00003FFF
+#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_27 0x1B
+#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
+#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_27_TINIT_MASK 0x0000FFFF
+#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_28 0x1C
+#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
+#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
+#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
+
+#define DDR0_29 0x1D
+
+#define DDR0_30 0x1E
+
+#define DDR0_31 0x1F
+#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
+#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_32 0x20
+#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_33 0x21
+#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_34 0x22
+#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_35 0x23
+#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_36 0x24
+#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_37 0x25
+#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_38 0x26
+#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_39 0x27
+#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_40 0x28
+#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_41 0x29
+#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_42 0x2A
+#define DDR0_42_ADDR_PINS_MASK 0x07000000
+#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
+#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_43 0x2B
+#define DDR0_43_TWR_MASK 0x07000000
+#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_43_APREBIT_MASK 0x000F0000
+#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
+#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
+#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_44 0x2C
+#define DDR0_44_TRCD_MASK 0x000000FF
+#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
+
+#endif /* _SPD_SDRAM_DENALI_H_ */
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index ff211ae..b2b82c7 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -35,9 +35,9 @@
int board_early_init_f(void)
{
- unsigned long sdr0_cust0;
- unsigned long sdr0_pfc1, sdr0_pfc2;
- register uint reg;
+ u32 sdr0_cust0;
+ u32 sdr0_pfc1, sdr0_pfc2;
+ u32 reg;
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xb8400000);
@@ -142,6 +142,7 @@
{
uint pbcr;
int size_val = 0;
+ u32 reg;
#ifdef CONFIG_440EPX
unsigned long usb2d0cr = 0;
unsigned long usb2phy0cr, usb2h0cr = 0;
@@ -335,18 +336,33 @@
}
#endif /* CONFIG_440EPX */
+ /*
+ * Clear PLB4A0_ACR[WRP]
+ * This fix will make the MAL burst disabling patch for the Linux
+ * EMAC driver obsolete.
+ */
+ reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+ mtdcr(plb4_acr, reg);
+
return 0;
}
int checkboard(void)
{
char *s = getenv("serial#");
+ u8 rev;
+ u8 val;
#ifdef CONFIG_440EPX
printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
#else
printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
#endif
+
+ rev = *(u8 *)(CFG_CPLD + 0);
+ val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+ printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
+
if (s != NULL) {
puts(", serial# ");
puts(s);
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index 754ae44..04f58e0 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -39,24 +39,6 @@
reg = mfdcr(ebccfgd);
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
- mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
- mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */
-
- mtebc(pb1ap, 0x00000000);
- mtebc(pb1cr, 0x00000000);
-
- mtebc(pb2ap, 0x04814500);
- /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
-
- mtebc(pb3ap, 0x00000000);
- mtebc(pb3cr, 0x00000000);
-
- mtebc(pb4ap, 0x00000000);
- mtebc(pb4cr, 0x00000000);
-
- mtebc(pb5ap, 0x00000000);
- mtebc(pb5cr, 0x00000000);
-
/*--------------------------------------------------------------------
* Setup the GPIO pins
*-------------------------------------------------------------------*/
@@ -190,8 +172,15 @@
int checkboard(void)
{
char *s = getenv("serial#");
+ u8 rev;
+ u8 val;
printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
+
+ rev = *(u8 *)(CFG_CPLD + 0);
+ val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+ printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
+
if (s != NULL) {
puts(", serial# ");
puts(s);
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 588ee90..d47219c 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -39,24 +39,6 @@
reg = mfdcr(ebccfgd);
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
- mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
- mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */
-
- mtebc(pb1ap, 0x00000000);
- mtebc(pb1cr, 0x00000000);
-
- mtebc(pb2ap, 0x04814500);
- /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
-
- mtebc(pb3ap, 0x00000000);
- mtebc(pb3cr, 0x00000000);
-
- mtebc(pb4ap, 0x00000000);
- mtebc(pb4cr, 0x00000000);
-
- mtebc(pb5ap, 0x00000000);
- mtebc(pb5cr, 0x00000000);
-
/*--------------------------------------------------------------------
* Setup the GPIO pins
*-------------------------------------------------------------------*/
@@ -186,8 +168,15 @@
int checkboard(void)
{
char *s = getenv("serial#");
+ u8 rev;
+ u8 val;
printf("Board: Yosemite - AMCC PPC440EP Evaluation Board");
+
+ rev = *(u8 *)(CFG_CPLD + 0);
+ val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+ printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
+
if (s != NULL) {
puts(", serial# ");
puts(s);
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
index 63e4139..f1bb721 100644
--- a/board/mcc200/auto_update.c
+++ b/board/mcc200/auto_update.c
@@ -121,10 +121,10 @@
#define I2C_PSOC_KEYPAD_ADDR 0x53
/* keypad mask */
-#define KEYPAD_ROW 3
-#define KEYPAD_COL 3
-#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))&0xFF)
-#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))>>8)
+#define KEYPAD_ROW 2
+#define KEYPAD_COL 2
+#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))&0xFF)
+#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))>>8)
/* externals */
extern int fat_register_device(block_dev_desc_t *, int);
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 67969a6..af047e2 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -92,8 +92,8 @@
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
- * is something else than 0x00000000.
+ * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * is something else than 0x00000000.
*/
long int initdram (int board_type)
@@ -228,10 +228,6 @@
{
ulong flash_sup_end, snum;
-#ifdef CONFIG_AUTO_UPDATE
- /* this has priority over all else */
- do_auto_update();
-#endif
/*
* Adjust flash start and offset to detected values
*/
@@ -294,6 +290,9 @@
flash_info[0].sector_count = snum;
}
+#ifdef CONFIG_AUTO_UPDATE
+ do_auto_update();
+#endif
return (0);
}
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index 2389561..5abc87d 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -77,8 +77,12 @@
mtdcr (uicb0tr, 0x00000000); /* */
mtdcr (uicb0vr, 0x00000001); /* */
+ /* Setup shutdown/SSD empty interrupt as inputs */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
+ out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
+
/* Setup GPIO/IRQ multiplexing */
- mtsdr(sdr_pfc0, 0x01a03e00);
+ mtsdr(sdr_pfc0, 0x01a33e00);
return 0;
}
@@ -105,26 +109,11 @@
static int board_rev(void)
{
- int rev;
- u32 pfc0;
-
- /* Setup GPIO14 & 15 as GPIO */
- mfsdr(sdr_pfc0, pfc0);
- pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1;
- mtsdr(sdr_pfc0, pfc0);
-
/* Setup as input */
- out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
- out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
-
- rev = (in32(GPIO0_IR) >> 16) & 0x3;
-
- /* Setup GPIO14 & 15 as non GPIO again */
- mfsdr(sdr_pfc0, pfc0);
- pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1);
- mtsdr(sdr_pfc0, pfc0);
+ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
+ out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
- return rev;
+ return (in32(GPIO0_IR) >> 16) & 0x3;
}
int checkboard (void)
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index e63c921..d66b088 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -154,7 +154,7 @@
return 1;
}
-void board_nand_init(struct nand_chip *nand)
+int board_nand_init(struct nand_chip *nand)
{
alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
@@ -169,5 +169,7 @@
nand->read_buf = alpr_nand_read_buf;
nand->verify_buf = alpr_nand_verify_buf;
nand->dev_ready = alpr_nand_dev_ready;
+
+ return 0;
}
#endif
diff --git a/board/solidcard3/init.S b/board/solidcard3/init.S
index 36039e8..e7b3c83 100644
--- a/board/solidcard3/init.S
+++ b/board/solidcard3/init.S
@@ -1,26 +1,26 @@
/*------------------------------------------------------------------------------+
*
- * This souce code has been made available to you by EuroDesign
- * (www.eurodsn.de). It's based on the original IBM source code, so
- * this follows:
+ * This souce code has been made available to you by EuroDesign
+ * (www.eurodsn.de). It's based on the original IBM source code, so
+ * this follows:
*
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
*
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
*
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
*
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
*------------------------------------------------------------------------------- */
#include <config.h>
@@ -56,12 +56,12 @@
* timings into internal flash and external flash
*/
mfdcr r24,strap /* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx
- 0 0 -> 8 bit external ROM
- 0 1 -> 16 bit internal ROM */
+ 0 0 -> 8 bit external ROM
+ 0 1 -> 16 bit internal ROM */
addi r4,0,2
srw r24,r24,r4 /* shift right r24 two positions */
andi. r24,r24,0x06000
-/*
+/*
* All calculations are based on 33MHz EBC clock.
*
* First, create a "very slow" timing (~250ns) with burst mode enabled
@@ -130,7 +130,7 @@
mtdcr ebccfgd,r4
/*-----------------------------------------------------------------------
- * Memory Bank 3 (Second-Flash) initialization
+ * Memory Bank 3 (Second-Flash) initialization
* 0xF0000000...0xF01FFFFF -> 2MB
*----------------------------------------------------------------------- */
@@ -149,7 +149,7 @@
xori r24,r24,0x2000 /* invert current bus width */
or r4,r4,r24
mtdcr ebccfgd,r4
-
+
/*-----------------------------------------------------------------------
* Memory Bank 1 (NAND-Flash) initialization
* 0x77D00000...0x77DFFFFF -> 1MB
@@ -186,7 +186,7 @@
li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */
mtdcr ebccfga,r4
lis r4,0x0180
- ori r4,r4,0x5940
+ ori r4,r4,0x5940
mtdcr ebccfgd,r4
#endif
@@ -199,7 +199,7 @@
A7 (ppc notation) or A24 (standard notation) decides about
the type of access:
A7/A24=0 -> memory cycle
- A7//A24=1 -> I/O cycle
+ A7/ /A24=1 -> I/O cycle
*/
li r4,pb2ap /* PB2AP=Peripheral Bank 2 Access Parameters */
mtdcr ebccfga,r4
@@ -253,7 +253,7 @@
li r25,pb6cr /* PB6CR=Peripheral Bank 6 Configuration Register */
mtdcr ebccfga,r25
lis r4,0x7401
- ori r4,r4,0xA000
+ ori r4,r4,0xA000
mtdcr ebccfgd,r4
li r25,pb7cr /* PB7CR=Peripheral Bank 7 Configuration Register */
@@ -295,8 +295,8 @@
*
* Note: All calculations are based on 33MHz EBC clock. One '#' or '_' is 30ns
*
- * |- 300ns --|
- * |---- 420ns ---|---- 420ns ---| cycle
+ * |- 300ns --|
+ * |---- 420ns ---|---- 420ns ---| cycle
* CS ############:###____#######:###____#######
* OE ############:####___#######:####___#######
* WE ############:####__########:####__########
@@ -380,4 +380,3 @@
stb r3,0(r4) /* 01 -> external bus controller is initialized */
nop /* pass2 DCR errata #8 */
blr
-
diff --git a/board/solidcard3/sc3nand.c b/board/solidcard3/sc3nand.c
new file mode 100644
index 0000000..7daa877
--- /dev/null
+++ b/board/solidcard3/sc3nand.c
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <nand.h>
+#include <asm/processor.h>
+
+#define readb(addr) *(volatile u_char *)(addr)
+#define readl(addr) *(volatile u_long *)(addr)
+#define writeb(d,addr) *(volatile u_char *)(addr) = (d)
+
+#define SC3_NAND_ALE 29 /* GPIO PIN 3 */
+#define SC3_NAND_CLE 30 /* GPIO PIN 2 */
+#define SC3_NAND_CE 27 /* GPIO PIN 5 */
+
+static void *sc3_io_base;
+static void *sc3_control_base = (void *)0xEF600700;
+
+static void sc3_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ set_bit (SC3_NAND_CLE, sc3_control_base);
+ break;
+ case NAND_CTL_CLRCLE:
+ clear_bit (SC3_NAND_CLE, sc3_control_base);
+ break;
+
+ case NAND_CTL_SETALE:
+ set_bit (SC3_NAND_ALE, sc3_control_base);
+ break;
+ case NAND_CTL_CLRALE:
+ clear_bit (SC3_NAND_ALE, sc3_control_base);
+ break;
+
+ case NAND_CTL_SETNCE:
+ set_bit (SC3_NAND_CE, sc3_control_base);
+ break;
+ case NAND_CTL_CLRNCE:
+ clear_bit (SC3_NAND_CE, sc3_control_base);
+ break;
+ }
+}
+
+static int sc3_nand_dev_ready(struct mtd_info *mtd)
+{
+ if (!(readl(sc3_control_base + 0x1C) & 0x4000))
+ return 0;
+ return 1;
+}
+
+static void sc3_select_chip(struct mtd_info *mtd, int chip)
+{
+ clear_bit (SC3_NAND_CE, sc3_control_base);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+
+ sc3_io_base = (void *) CFG_NAND_BASE;
+ /* Set address of NAND IO lines (Using Linear Data Access Region) */
+ nand->IO_ADDR_R = (void __iomem *) sc3_io_base;
+ nand->IO_ADDR_W = (void __iomem *) sc3_io_base;
+ /* Reference hardware control function */
+ nand->hwcontrol = sc3_nand_hwcontrol;
+ nand->dev_ready = sc3_nand_dev_ready;
+ nand->select_chip = sc3_select_chip;
+ return 0;
+}
+#endif
diff --git a/board/solidcard3/solidcard3.c b/board/solidcard3/solidcard3.c
index 8044711..21cc031 100644
--- a/board/solidcard3/solidcard3.c
+++ b/board/solidcard3/solidcard3.c
@@ -1,4 +1,4 @@
-/*
+/*
* (C) Copyright 2007
* Heiko Schocher, DENX Software Engineering, <hs@denx.de>.
*
@@ -454,7 +454,7 @@
printf("\n -Address setup %luns",
((ap & 0xC0000) >> 18) * CYCLE);
printf("\n -CS active to RD %luns/WR %luns",
- ((ap & 0x30000) >> 16) * CYCLE,
+ ((ap & 0x30000) >> 16) * CYCLE,
((ap & 0xC000) >> 14) * CYCLE);
printf("\n -WR to CS inactive %luns",
((ap & 0x3000) >> 12) * CYCLE);
@@ -496,7 +496,7 @@
for (i = 0; i < 8; i++) {
show_reg (i);
}
-
+
mtdcr (ebccfga, epcr);
ul1 = mfdcr (ebccfgd);
@@ -707,7 +707,7 @@
switch (PCI_DEV(dev)) {
case 10:
- int_line = 31; /* INT A */
+ int_line = 31; /* INT A */
POST_OUT(0x42);
break;
diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile
index 424ab1c..0c48c3a 100644
--- a/board/spc1920/Makefile
+++ b/board/spc1920/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o
+COBJS = $(BOARD).o hpi.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c
new file mode 100644
index 0000000..3c36f79
--- /dev/null
+++ b/board/spc1920/hpi.c
@@ -0,0 +1,603 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Host Port Interface (HPI)
+ */
+
+/* debug levels:
+ * 0 : errors
+ * 1 : usefull info
+ * 2 : lots of info
+ * 3 : noisy
+ */
+
+#define DEBUG 0
+
+#include <config.h>
+#include <common.h>
+#include <mpc8xx.h>
+
+#include "pld.h"
+#include "hpi.h"
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+/* original table:
+ * - inserted loops to achieve long CS low and high Periods (~217ns)
+ * - move cs high 2/4 to the right
+ */
+const uint dsp_table_slow[] =
+{
+ /* single read (offset 0x00 in upm ram) */
+ 0x8fffdc04, 0x0fffdc84, 0x0fffdc84, 0x0fffdc00,
+ 0x3fffdc04, 0xffffdc84, 0xffffdc84, 0xffffdc05,
+
+ /* burst read (offset 0x08 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* single write (offset 0x18 in upm ram) */
+ 0x8fffd004, 0x0fffd084, 0x0fffd084, 0x3fffd000,
+ 0xffffd084, 0xffffd084, 0xffffd005, _NOT_USED_,
+
+ /* burst write (offset 0x20 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /* refresh (offset 0x30 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /* exception (offset 0x3C in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* dsp hpi upm ram table
+ * works fine for noninc access, failes on incremental.
+ * - removed first word
+ */
+const uint dsp_table_fast[] =
+{
+ /* single read (offset 0x00 in upm ram) */
+ 0x8fffdc04, 0x0fffdc04, 0x0fffdc00, 0x3fffdc04,
+ 0xffffdc05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* burst read (offset 0x08 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* single write (offset 0x18 in upm ram) */
+ 0x8fffd004, 0x0fffd004, 0x3fffd000, 0xffffd005,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* burst write (offset 0x20 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /* refresh (offset 0x30 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /* exception (offset 0x3C in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+#undef HPI_TEST_OSZI
+
+#define HPI_TEST_CHUNKSIZE 0x1000
+#define HPI_TEST_PATTERN 0x00000000
+#define HPI_TEST_START 0x0
+#define HPI_TEST_END 0x30000
+
+#define TINY_AUTOINC_DATA_SIZE 16 /* 32bit words */
+#define TINY_AUTOINC_BASE_ADDR 0x0
+
+static int hpi_activate(void);
+static void hpi_inactivate(void);
+static void dsp_reset(void);
+
+static int hpi_write_inc(u32 addr, u32 *data, u32 count);
+static int hpi_read_inc(u32 addr, u32 *buf, u32 count);
+static int hpi_write_noinc(u32 addr, u32 data);
+static u32 hpi_read_noinc(u32 addr);
+
+int hpi_test(void);
+static int hpi_write_addr_test(u32 addr);
+static int hpi_read_write_test(u32 addr, u32 data);
+static int hpi_tiny_autoinc_test(void);
+#endif /* CONFIG_SPC1920_HPI_TEST */
+
+
+/* init the host port interface on UPMA */
+int hpi_init(void)
+{
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immr->im_memctl;
+ volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+
+ upmconfig(UPMA, (uint *)dsp_table_slow, sizeof(dsp_table_slow)/sizeof(uint));
+ udelay(100);
+
+ memctl->memc_mamr = CFG_MAMR;
+ memctl->memc_or3 = CFG_OR3;
+ memctl->memc_br3 = CFG_BR3;
+
+ /* reset dsp */
+ dsp_reset();
+
+ /* activate hpi switch*/
+ pld->dsp_hpi_on = 0x1;
+
+ udelay(100);
+
+ return 0;
+}
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+/* activate the Host Port interface */
+static int hpi_activate(void)
+{
+ volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+
+ /* turn on hpi */
+ pld->dsp_hpi_on = 0x1;
+
+ udelay(5);
+
+ /* turn on the power EN_DSP_POWER high*/
+ /* currently always on TBD */
+
+ /* setup hpi control register */
+ HPI_HPIC_1 = (u16) 0x0008;
+ HPI_HPIC_2 = (u16) 0x0008;
+
+ udelay(100);
+
+ return 0;
+}
+
+/* turn off the host port interface */
+static void hpi_inactivate(void)
+{
+ volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+
+ /* deactivate hpi */
+ pld->dsp_hpi_on = 0x0;
+
+ /* reset the dsp */
+ /* pld->dsp_reset = 0x0; */
+
+ /* turn off the power EN_DSP_POWER# high*/
+ /* currently always on TBD */
+
+}
+
+/* reset the DSP */
+static void dsp_reset(void)
+{
+ volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+ pld->dsp_reset = 0x1;
+ pld->dsp_hpi_on = 0x0;
+
+ udelay(300000);
+
+ pld->dsp_reset = 0x0;
+ pld->dsp_hpi_on = 0x1;
+}
+
+
+/* write using autoinc (count is number of 32bit words) */
+static int hpi_write_inc(u32 addr, u32 *data, u32 count)
+{
+ int i;
+ u16 addr1, addr2;
+
+ addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+ addr2 = (u16) (addr & 0xffff);
+
+ /* write address */
+ HPI_HPIA_1 = addr1;
+ HPI_HPIA_2 = addr2;
+
+ debugX(4, "writing from data=0x%x to 0x%x\n", data, (data+count));
+
+ for(i=0; i<count; i++) {
+ HPI_HPID_INC_1 = (u16) ((data[i] >> 16) & 0xffff);
+ HPI_HPID_INC_2 = (u16) (data[i] & 0xffff);
+ debugX(4, "hpi_write_inc: data1=0x%x, data2=0x%x\n",
+ (u16) ((data[i] >> 16) & 0xffff),
+ (u16) (data[i] & 0xffff));
+ }
+#if 0
+ while(data_ptr < (u16*) (data + count)) {
+ HPI_HPID_INC_1 = *(data_ptr++);
+ HPI_HPID_INC_2 = *(data_ptr++);
+ }
+#endif
+
+ /* return number of bytes written */
+ return count;
+}
+
+/*
+ * read using autoinc (count is number of 32bit words)
+ */
+static int hpi_read_inc(u32 addr, u32 *buf, u32 count)
+{
+ int i;
+ u16 addr1, addr2, data1, data2;
+
+ addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+ addr2 = (u16) (addr & 0xffff);
+
+ /* write address */
+ HPI_HPIA_1 = addr1;
+ HPI_HPIA_2 = addr2;
+
+ for(i=0; i<count; i++) {
+ data1 = HPI_HPID_INC_1;
+ data2 = HPI_HPID_INC_2;
+ debugX(4, "hpi_read_inc: data1=0x%x, data2=0x%x\n", data1, data2);
+ buf[i] = (((u32) data1) << 16) | (data2 & 0xffff);
+ }
+
+#if 0
+ while(buf_ptr < (u16*) (buf + count)) {
+ *(buf_ptr++) = HPI_HPID_INC_1;
+ *(buf_ptr++) = HPI_HPID_INC_2;
+ }
+#endif
+
+ /* return number of bytes read */
+ return count;
+}
+
+
+/* write to non- auto inc regs */
+static int hpi_write_noinc(u32 addr, u32 data)
+{
+
+ u16 addr1, addr2, data1, data2;
+
+ addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+ addr2 = (u16) (addr & 0xffff);
+
+ /* printf("hpi_write_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */
+
+ HPI_HPIA_1 = addr1;
+ HPI_HPIA_2 = addr2;
+
+ data1 = (u16) ((data >> 16) & 0xffff);
+ data2 = (u16) (data & 0xffff);
+
+ /* printf("hpi_write_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */
+
+ HPI_HPID_NOINC_1 = data1;
+ HPI_HPID_NOINC_2 = data2;
+
+ return 0;
+}
+
+/* read from non- auto inc regs */
+static u32 hpi_read_noinc(u32 addr)
+{
+ u16 addr1, addr2, data1, data2;
+ u32 ret;
+
+ addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+ addr2 = (u16) (addr & 0xffff);
+
+ HPI_HPIA_1 = addr1;
+ HPI_HPIA_2 = addr2;
+
+ /* printf("hpi_read_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */
+
+ data1 = HPI_HPID_NOINC_1;
+ data2 = HPI_HPID_NOINC_2;
+
+ /* printf("hpi_read_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */
+
+ ret = (((u32) data1) << 16) | (data2 & 0xffff);
+ return ret;
+
+}
+
+/*
+ * Host Port Interface Tests
+ */
+
+#ifndef HPI_TEST_OSZI
+/* main test function */
+int hpi_test(void)
+{
+ int err = 0;
+ u32 i, ii, pattern, tmp;
+
+ pattern = HPI_TEST_PATTERN;
+
+ u32 test_data[HPI_TEST_CHUNKSIZE];
+ u32 read_data[HPI_TEST_CHUNKSIZE];
+
+ debugX(2, "hpi_test: activating hpi...");
+ hpi_activate();
+ debugX(2, "OK.\n");
+
+#if 0
+ /* Dump the first 1024 bytes
+ *
+ */
+ for(i=0; i<1024; i+=4) {
+ if(i%16==0)
+ printf("\n0x%08x: ", i);
+ printf("0x%08x ", hpi_read_noinc(i));
+ }
+#endif
+
+ /* HPIA read-write test
+ *
+ */
+ debugX(1, "hpi_test: starting HPIA read-write tests...\n");
+ err |= hpi_write_addr_test(0xdeadc0de);
+ err |= hpi_write_addr_test(0xbeefd00d);
+ err |= hpi_write_addr_test(0xabcd1234);
+ err |= hpi_write_addr_test(0xaaaaaaaa);
+ if(err) {
+ debugX(1, "hpi_test: HPIA read-write tests: *** FAILED ***\n");
+ return -1;
+ }
+ debugX(1, "hpi_test: HPIA read-write tests: OK\n");
+
+
+ /* read write test using nonincremental data regs
+ *
+ */
+ debugX(1, "hpi_test: starting nonincremental tests...\n");
+ for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) {
+ err |= hpi_read_write_test(i, pattern);
+
+ /* stolen from cmd_mem.c */
+ if(pattern & 0x80000000) {
+ pattern = -pattern; /* complement & increment */
+ } else {
+ pattern = ~pattern;
+ }
+ err |= hpi_read_write_test(i, pattern);
+
+ if(err) {
+ debugX(1, "hpi_test: nonincremental tests *** FAILED ***\n");
+ return -1;
+ }
+ }
+ debugX(1, "hpi_test: nonincremental test OK\n");
+
+ /* read write a chunk of data using nonincremental data regs
+ *
+ */
+ debugX(1, "hpi_test: starting nonincremental chunk tests...\n");
+ pattern = HPI_TEST_PATTERN;
+ for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) {
+ hpi_write_noinc(i, pattern);
+
+ /* stolen from cmd_mem.c */
+ if(pattern & 0x80000000) {
+ pattern = -pattern; /* complement & increment */
+ } else {
+ pattern = ~pattern;
+ }
+ }
+ pattern = HPI_TEST_PATTERN;
+ for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) {
+ tmp = hpi_read_noinc(i);
+
+ if(tmp != pattern) {
+ debugX(1, "hpi_test: noninc chunk test *** FAILED *** @ 0x%x, written=0x%x, read=0x%x\n", i, pattern, tmp);
+ err = -1;
+ }
+ /* stolen from cmd_mem.c */
+ if(pattern & 0x80000000) {
+ pattern = -pattern; /* complement & increment */
+ } else {
+ pattern = ~pattern;
+ }
+ }
+ if(err)
+ return -1;
+ debugX(1, "hpi_test: nonincremental chunk test OK\n");
+
+
+#ifdef DO_TINY_TEST
+ /* small verbose test using autoinc and nonautoinc to compare
+ *
+ */
+ debugX(1, "hpi_test: tiny_autoinc_test...\n");
+ hpi_tiny_autoinc_test();
+ debugX(1, "hpi_test: tiny_autoinc_test done\n");
+#endif /* DO_TINY_TEST */
+
+
+ /* $%& write a chunk of data using the autoincremental regs
+ *
+ */
+ debugX(1, "hpi_test: starting autoinc test %d chunks with 0x%x bytes...\n",
+ ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE),
+ HPI_TEST_CHUNKSIZE);
+
+ for(i=HPI_TEST_START;
+ i < ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE);
+ i++) {
+ /* generate the pattern data */
+ debugX(3, "generating pattern data: ");
+ for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) {
+ debugX(3, "0x%x ", pattern);
+
+ test_data[ii] = pattern;
+ read_data[ii] = 0x0; /* zero to be sure */
+
+ /* stolen from cmd_mem.c */
+ if(pattern & 0x80000000) {
+ pattern = -pattern; /* complement & increment */
+ } else {
+ pattern = ~pattern;
+ }
+ }
+ debugX(3, "done\n");
+
+ debugX(2, "Writing autoinc data @ 0x%x\n", i);
+ hpi_write_inc(i, test_data, HPI_TEST_CHUNKSIZE);
+
+ debugX(2, "Reading autoinc data @ 0x%x\n", i);
+ hpi_read_inc(i, read_data, HPI_TEST_CHUNKSIZE);
+
+ /* compare */
+ for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) {
+ debugX(3, "hpi_test_autoinc: @ 0x%x, written=0x%x, read=0x%x", i+ii, test_data[ii], read_data[ii]);
+ if(read_data[ii] != test_data[ii]) {
+ debugX(0, "hpi_test: autoinc test @ 0x%x, written=0x%x, read=0x%x *** FAILED ***\n", i+ii, test_data[ii], read_data[ii]);
+ return -1;
+ }
+ }
+ }
+ debugX(1, "hpi_test: autoinc test OK\n");
+
+ return 0;
+}
+#else /* HPI_TEST_OSZI */
+int hpi_test(void)
+{
+ int i;
+ u32 read_data[TINY_AUTOINC_DATA_SIZE];
+
+ unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = {
+ 0x11112222, 0x33334444, 0x55556666, 0x77778888,
+ 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111,
+ 0x00010002, 0x00030004, 0x00050006, 0x00070008,
+ 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001
+ };
+
+ debugX(0, "hpi_test: activating hpi...");
+ hpi_activate();
+ debugX(0, "OK.\n");
+
+ while(1) {
+ led9(1);
+ debugX(0, " writing to autoinc...\n");
+ hpi_write_inc(TINY_AUTOINC_BASE_ADDR,
+ dummy_data, TINY_AUTOINC_DATA_SIZE);
+
+ debugX(0, " reading from autoinc...\n");
+ hpi_read_inc(TINY_AUTOINC_BASE_ADDR,
+ read_data, TINY_AUTOINC_DATA_SIZE);
+
+ for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) {
+ debugX(0, " written=0x%x, read(inc)=0x%x\n",
+ dummy_data[i], read_data[i]);
+ }
+ led9(0);
+ udelay(2000000);
+ }
+ return 0;
+}
+#endif
+
+/* test if Host Port Address Register can be written correctly */
+static int hpi_write_addr_test(u32 addr)
+{
+ u32 read_back;
+ /* write address */
+ HPI_HPIA_1 = ((u16) (addr >> 16)); /* First HW is most significant */
+ HPI_HPIA_2 = ((u16) addr);
+
+ read_back = (((u32) HPI_HPIA_1)<<16) | ((u32) HPI_HPIA_2);
+
+ if(read_back == addr) {
+ debugX(2, " hpi_write_addr_test OK: written=0x%x, read=0x%x\n",
+ addr, read_back);
+ return 0;
+ } else {
+ debugX(0, " hpi_write_addr_test *** FAILED ***: written=0x%x, read=0x%x\n",
+ addr, read_back);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* test if a simple read/write sequence succeeds */
+static int hpi_read_write_test(u32 addr, u32 data)
+{
+ u32 read_back;
+
+ hpi_write_noinc(addr, data);
+ read_back = hpi_read_noinc(addr);
+
+ if(read_back == data) {
+ debugX(2, " hpi_read_write_test: OK, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back);
+ return 0;
+ } else {
+ debugX(0, " hpi_read_write_test: *** FAILED ***, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int hpi_tiny_autoinc_test(void)
+{
+ int i;
+ u32 read_data[TINY_AUTOINC_DATA_SIZE];
+ u32 read_data_noinc[TINY_AUTOINC_DATA_SIZE];
+
+ unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = {
+ 0x11112222, 0x33334444, 0x55556666, 0x77778888,
+ 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111,
+ 0x00010002, 0x00030004, 0x00050006, 0x00070008,
+ 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001
+ };
+
+ printf(" writing to autoinc...\n");
+ hpi_write_inc(TINY_AUTOINC_BASE_ADDR, dummy_data, TINY_AUTOINC_DATA_SIZE);
+
+ printf(" reading from autoinc...\n");
+ hpi_read_inc(TINY_AUTOINC_BASE_ADDR, read_data, TINY_AUTOINC_DATA_SIZE);
+
+ printf(" reading from noinc for comparison...\n");
+ for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++)
+ read_data_noinc[i] = hpi_read_noinc(TINY_AUTOINC_BASE_ADDR+i*4);
+
+ for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) {
+ printf(" written=0x%x, read(inc)=0x%x, read(noinc)=0x%x\n",
+ dummy_data[i], read_data[i], read_data_noinc[i]);
+ }
+ return 0;
+}
+
+#endif /* CONFIG_SPC1920_HPI_TEST */
diff --git a/board/spc1920/hpi.h b/board/spc1920/hpi.h
new file mode 100644
index 0000000..4503873
--- /dev/null
+++ b/board/spc1920/hpi.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+int hpi_init(void);
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+int hpi_test(void);
+#endif
diff --git a/board/spc1920/pld.h b/board/spc1920/pld.h
index 3254f82..5beb71b 100644
--- a/board/spc1920/pld.h
+++ b/board/spc1920/pld.h
@@ -5,8 +5,8 @@
uchar com1_en;
uchar dsp_reset;
uchar dsp_hpi_on;
+ uchar superv_mode;
uchar codec_dsp_power_en;
- uchar clk2_en;
uchar clk3_select;
uchar clk4_select;
} spc1920_pld_t;
diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c
index 028f4c6..1f5dcb5 100644
--- a/board/spc1920/spc1920.c
+++ b/board/spc1920/spc1920.c
@@ -27,9 +27,9 @@
#include <common.h>
#include <mpc8xx.h>
#include "pld.h"
+#include "hpi.h"
#define _NOT_USED_ 0xFFFFFFFF
-/* #define debug(fmt,args...) printf (fmt ,##args) */
static long int dram_size (long int, long int *, long int);
@@ -172,10 +172,12 @@
memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
udelay (1000);
+ /* initalize the DSP Host Port Interface */
+ hpi_init();
- /* PLD Setup */
- memctl->memc_or5 = CFG_OR5_PRELIM;
- memctl->memc_br5 = CFG_BR5_PRELIM;
+ /* FRAM Setup */
+ memctl->memc_or4 = CFG_OR4;
+ memctl->memc_br4 = CFG_BR4;
udelay(1000);
return (size_b0);
@@ -207,13 +209,31 @@
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ /* Set Go/NoGo led (PA15) to color red */
+ immap->im_ioport.iop_papar &= ~0x1;
+ immap->im_ioport.iop_paodr &= ~0x1;
+ immap->im_ioport.iop_padir |= 0x1;
+ immap->im_ioport.iop_padat |= 0x1;
+#if 0
/* Turn on LED PD9 */
immap->im_ioport.iop_pdpar &= ~(0x0040);
immap->im_ioport.iop_pddir |= 0x0040;
immap->im_ioport.iop_pddat |= 0x0040;
+#endif
+
+ /*
+ * Enable console on SMC1. This requires turning on
+ * the com2_en signal and SMC1_DISABLE
+ */
+
+ /* SMC1_DISABLE: PB17 */
+ immap->im_cpm.cp_pbodr &= ~0x4000;
+ immap->im_cpm.cp_pbpar &= ~0x4000;
+ immap->im_cpm.cp_pbdir |= 0x4000;
+ immap->im_cpm.cp_pbdat &= ~0x4000;
- /* Enable PD10 (COM2_EN) */
+ /* COM2_EN: PD10 */
immap->im_ioport.iop_pdpar &= ~0x0020;
immap->im_ioport.iop_pddir &= ~0x4000;
immap->im_ioport.iop_pddir |= 0x0020;
@@ -228,6 +248,14 @@
return 0;
}
+int last_stage_init(void)
+{
+#ifdef CONFIG_SPC1920_HPI_TEST
+ printf("CMB1920 Host Port Interface Test: %s\n",
+ hpi_test() ? "Failed!" : "OK");
+#endif
+ return 0;
+}
int checkboard (void)
{
diff --git a/board/tqm5200/cam5200_flash.c b/board/tqm5200/cam5200_flash.c
index 8c3f62e..b3f095d 100644
--- a/board/tqm5200/cam5200_flash.c
+++ b/board/tqm5200/cam5200_flash.c
@@ -25,7 +25,7 @@
#include <mpc5xxx.h>
#include <asm/processor.h>
-#ifdef CONFIG_CAM5200
+#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
#if 0
#define DEBUGF(x...) printf(x)
@@ -783,4 +783,4 @@
return total_b;
}
-#endif /* ifdef CONFIG_CAM5200 */
+#endif /* if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) */
diff --git a/board/uc101/Makefile b/board/uc101/Makefile
new file mode 100644
index 0000000..ddfd2ef
--- /dev/null
+++ b/board/uc101/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/uc101/config.mk b/board/uc101/config.mk
new file mode 100644
index 0000000..51e8e84c
--- /dev/null
+++ b/board/uc101/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# INKA 4X0 board:
+#
+# Valid values for TEXT_BASE are:
+#
+# 0xFFE00000 boot high
+#
+# 0x00100000 boot from RAM (for testing only)
+#
+
+ifndef TEXT_BASE
+## Standard: boot high
+TEXT_BASE = 0xFFF00000
+## For testing: boot from RAM
+#TEXT_BASE = 0x00100000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/uc101/u-boot.lds b/board/uc101/u-boot.lds
new file mode 100644
index 0000000..123a14c
--- /dev/null
+++ b/board/uc101/u-boot.lds
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc5xxx/start.o (.text)
+ cpu/mpc5xxx/traps.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/cache.o (.text)
+ lib_ppc/time.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.ppcenv)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c
new file mode 100644
index 0000000..b803585
--- /dev/null
+++ b/board/uc101/uc101.c
@@ -0,0 +1,371 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2004
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <malloc.h>
+
+/* some SIMPLE GPIO Pins */
+#define GPIO_USB_8 (31-12)
+#define GPIO_USB_7 (31-13)
+#define GPIO_USB_6 (31-14)
+#define GPIO_USB_0 (31-15)
+#define GPIO_PSC3_7 (31-18)
+#define GPIO_PSC3_6 (31-19)
+#define GPIO_PSC3_1 (31-22)
+#define GPIO_PSC3_0 (31-23)
+
+/* some simple Interrupt GPIO Pins */
+#define GPIO_PSC3_8 2
+#define GPIO_USB1_9 3
+
+#define GPT_OUT_0 0x00000027
+#define GPT_OUT_1 0x00000037
+#define GPT_DISABLE 0x00000000 /* GPT pin disabled */
+
+#define GP_SIMP_ENABLE_O(n, v) {pgpio->simple_dvo |= (v << n); \
+ pgpio->simple_ddr |= (1 << n); \
+ pgpio->simple_gpioe |= (1 << n); \
+ }
+
+#define GP_SIMP_ENABLE_I(n) { pgpio->simple_ddr |= ~(1 << n); \
+ pgpio->simple_gpioe |= (1 << n); \
+ }
+
+#define GP_SIMP_SET_O(n, v) (pgpio->simple_dvo = v ? \
+ (pgpio->simple_dvo | (1 << n)) : \
+ (pgpio->simple_dvo & ~(1 << n)) )
+
+#define GP_SIMP_GET_O(n) ((pgpio->simple_dvo >> n) & 1)
+#define GP_SIMP_GET_I(n) ((pgpio->simple_ival >> n) & 1)
+
+#define GP_SINT_SET_O(n, v) (pgpio->sint_dvo = v ? \
+ (pgpio->sint_dvo | (1 << n)) : \
+ (pgpio->sint_dvo & ~(1 << n)) )
+
+#define GP_SINT_ENABLE_O(n, v) {pgpio->sint_ode &= ~(1 << n); \
+ pgpio->sint_ddr |= (1 << n); \
+ GP_SINT_SET_O(n, v); \
+ pgpio->sint_gpioe |= (1 << n); \
+ }
+
+#define GP_SINT_ENABLE_I(n) { pgpio->sint_ddr |= ~(1 << n); \
+ pgpio->sint_gpioe |= (1 << n); \
+ }
+
+#define GP_SINT_GET_O(n) ((pgpio->sint_ival >> n) & 1)
+#define GP_SINT_GET_I(n) ((pgpio-ntt_ival >> n) & 1)
+
+#define GP_TIMER_ENABLE_O(n, v) ( \
+ ((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr = v ? \
+ GPT_OUT_1 : \
+ GPT_OUT_0 )
+
+#define GP_TIMER_SET_O(n, v) GP_TIMER_ENABLE_O(n, v)
+
+#define GP_TIMER_GET_O(n, v) ( \
+ (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr & 0x10) >> 4)
+
+#define GP_TIMER_GET_I(n, v) ( \
+ (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->sr & 0x100) >> 8)
+
+#ifndef CFG_RAMBOOT
+static void sdram_start (int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set mode register: extended mode */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+ __asm__ volatile ("sync");
+
+ /* set mode register: reset DLL */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+ __asm__ volatile ("sync");
+#endif
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+ __asm__ volatile ("sync");
+
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+ __asm__ volatile ("sync");
+}
+#endif
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * is something else than 0x00000000.
+ */
+
+long int initdram (int board_type)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* setup SDRAM chip selects */
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
+ __asm__ volatile ("sync");
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set tap delay */
+ *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+ __asm__ volatile ("sync");
+#endif
+
+ /* find RAM size using SDRAM CS0 only */
+ sdram_start(0);
+ test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ sdram_start(1);
+ test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20)) {
+ dramsize = 0;
+ }
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
+ __builtin_ffs(dramsize >> 20) - 1;
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+ }
+
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+#else /* CFG_RAMBOOT */
+
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13) {
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ } else {
+ dramsize = 0;
+ }
+
+ /* retrieve size of memory connected to SDRAM CS1 */
+ dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+ if (dramsize2 >= 0x13) {
+ dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+ } else {
+ dramsize2 = 0;
+ }
+
+#endif /* CFG_RAMBOOT */
+
+/* return dramsize + dramsize2; */
+ return dramsize;
+}
+
+int checkboard (void)
+{
+ puts ("Board: MAN UC101\n");
+ return 0;
+}
+
+static void init_ports (void)
+{
+ volatile struct mpc5xxx_gpio *pgpio =
+ (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+ GP_SIMP_ENABLE_I(GPIO_USB_8); /* HEX Bit 3 */
+ GP_SIMP_ENABLE_I(GPIO_USB_7); /* HEX Bit 2 */
+ GP_SIMP_ENABLE_I(GPIO_USB_6); /* HEX Bit 1 */
+ GP_SIMP_ENABLE_I(GPIO_USB_0); /* HEX Bit 0 */
+ GP_SIMP_ENABLE_I(GPIO_PSC3_0); /* Switch Menue A */
+ GP_SIMP_ENABLE_I(GPIO_PSC3_1); /* Switch Menue B */
+ GP_SIMP_ENABLE_I(GPIO_PSC3_6); /* Switch Cold_Warm */
+ GP_SIMP_ENABLE_I(GPIO_PSC3_7); /* Switch Restart */
+ GP_SINT_ENABLE_O(GPIO_PSC3_8, 0); /* LED H2 */
+ GP_SINT_ENABLE_O(GPIO_USB1_9, 0); /* LED H3 */
+ GP_TIMER_ENABLE_O(4, 0); /* LED H4 */
+ GP_TIMER_ENABLE_O(5, 0); /* LED H5 */
+ GP_TIMER_ENABLE_O(3, 0); /* LED HB */
+ GP_TIMER_ENABLE_O(1, 0); /* RES_COLDSTART */
+}
+
+#ifdef CONFIG_PREBOOT
+
+static uchar kbd_magic_prefix[] = "key_magic";
+static uchar kbd_command_prefix[] = "key_cmd";
+
+struct kbd_data_t {
+ char s1;
+};
+
+struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
+{
+ volatile struct mpc5xxx_gpio *pgpio =
+ (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+ kbd_data->s1 = GP_SIMP_GET_I(GPIO_USB_8) << 3 | \
+ GP_SIMP_GET_I(GPIO_USB_7) << 2 | \
+ GP_SIMP_GET_I(GPIO_USB_6) << 1 | \
+ GP_SIMP_GET_I(GPIO_USB_0) << 0;
+ return kbd_data;
+}
+
+static int compare_magic (const struct kbd_data_t *kbd_data, uchar *str)
+{
+ char s1 = str[0];
+
+ if (s1 >= '0' && s1 <= '9')
+ s1 -= '0';
+ else if (s1 >= 'a' && s1 <= 'f')
+ s1 = s1 - 'a' + 10;
+ else if (s1 >= 'A' && s1 <= 'F')
+ s1 = s1 - 'A' + 10;
+ else
+ return -1;
+
+ if (s1 != kbd_data->s1) return -1;
+ return 0;
+}
+
+static uchar *key_match (const struct kbd_data_t *kbd_data)
+{
+ uchar magic[sizeof (kbd_magic_prefix) + 1];
+ uchar *suffix;
+ uchar *kbd_magic_keys;
+
+ /*
+ * The following string defines the characters that can be appended
+ * to "key_magic" to form the names of environment variables that
+ * hold "magic" key codes, i. e. such key codes that can cause
+ * pre-boot actions. If the string is empty (""), then only
+ * "key_magic" is checked (old behaviour); the string "125" causes
+ * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
+ */
+ if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
+ kbd_magic_keys = "";
+
+ /* loop over all magic keys;
+ * use '\0' suffix in case of empty string
+ */
+ for (suffix = kbd_magic_keys; *suffix ||
+ suffix == kbd_magic_keys; ++suffix) {
+ sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
+
+ if (compare_magic(kbd_data, getenv(magic)) == 0) {
+ uchar cmd_name[sizeof (kbd_command_prefix) + 1];
+ char *cmd;
+
+ sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
+ cmd = getenv (cmd_name);
+
+ return (cmd);
+ }
+ }
+
+ return (NULL);
+}
+
+#endif /* CONFIG_PREBOOT */
+
+int misc_init_r (void)
+{
+ /* Init the I/O ports */
+ init_ports ();
+
+#ifdef CONFIG_PREBOOT
+ struct kbd_data_t kbd_data;
+ /* Decode keys */
+ uchar *str = strdup (key_match (get_keys (&kbd_data)));
+ /* Set or delete definition */
+ setenv ("preboot", str);
+ free (str);
+#endif /* CONFIG_PREBOOT */
+ return 0;
+}
+
+int board_early_init_r (void)
+{
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+ *(vu_long *)MPC5XXX_BOOTCS_START =
+ *(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
+ *(vu_long *)MPC5XXX_BOOTCS_STOP =
+ *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
+ /* Interbus enable it here ?? */
+ *(vu_long *)MPC5XXX_GPT6_ENABLE = GPT_OUT_1;
+ return 0;
+}
+#ifdef CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc5xxx_init(&hose);
+}
+#endif
+
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+ /* Trigger HW Watchdog with TIMER_0 */
+ *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_1;
+ *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_0;
+}
+#endif
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
index dede996..ace4aa2 100644
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@@ -191,16 +191,8 @@
return 0;
}
-
-int board_early_init_r(void)
+int board_early_init_f(void)
{
- /*
- * Now, when we are in RAM, enable flash write access for the
- * detection process. Note that CS_BOOT cannot be cleared when
- * executing in flash.
- */
- *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
-
#ifdef CONFIG_HW_WATCHDOG
/*
* Enable and configure the direction (output) of PSC3_9 - watchdog
@@ -210,6 +202,17 @@
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9;
#endif /* CONFIG_HW_WATCHDOG */
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write access for the
+ * detection process. Note that CS_BOOT cannot be cleared when
+ * executing in flash.
+ */
+ *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
/*
* Enable GPIO_WKUP_7 to "read the status of the actual power
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index 182e2ab..e68f16f 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -83,7 +83,7 @@
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
- reset, CFG_MAXARGS, 1, do_reset,
+ reset, 1, 0, do_reset,
"reset - Perform RESET of the CPU\n",
NULL
);
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index b7e00b3..7e65821 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -123,7 +123,7 @@
#endif
#if defined(CFG_CS7_START) && defined(CFG_CS7_SIZE)
- *(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS5_START);
+ *(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS7_START);
*(vu_long *)MPC5XXX_CS7_STOP = STOP_REG(CFG_CS7_START, CFG_CS7_SIZE);
addecr |= (1 << 27);
#endif
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 37fe3e7..71c1bfa 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -376,7 +376,7 @@
#if (DEBUG & 0x2)
if (fec->xcv_type != SEVENWIRE)
- mpc5xxx_fec_phydump ();
+ mpc5xxx_fec_phydump (dev->name);
#endif
/*
@@ -575,7 +575,7 @@
#if (DEBUG & 0x2)
if (fec->xcv_type != SEVENWIRE)
- mpc5xxx_fec_phydump ();
+ mpc5xxx_fec_phydump (dev->name);
#endif
/*
@@ -882,7 +882,8 @@
defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \
defined(CONFIG_MCC200) || defined(CONFIG_O2DNT) || \
defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \
- defined(CONFIG_TQM5200) || defined(CONFIG_V38B)
+ defined(CONFIG_TQM5200) || defined(CONFIG_V38B) || \
+ defined(CONFIG_UC101)
# ifndef CONFIG_FEC_10MBIT
fec->xcv_type = MII100;
# else
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index 8ae584f..9d0fc6b 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -227,8 +227,17 @@
sp->smc_smcm = 0;
sp->smc_smce = 0xff;
-#ifdef CFG_SPC1920_SMC1_CLK4 /* clock source is PLD */
- *((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0xff;
+#ifdef CFG_SPC1920_SMC1_CLK4
+ /* clock source is PLD */
+
+ /* set freq to 19200 Baud */
+ *((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0x3;
+ /* configure clk4 as input */
+ im->im_ioport.iop_pdpar |= 0x800;
+ im->im_ioport.iop_pddir &= ~0x800;
+
+ cp->cp_simode = 0x0000;
+ cp->cp_simode |= 0x7000;
#else
/* Set up the baud rate generator */
smc_setbrg ();
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 9c5c910..57a7e8d 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -332,24 +332,44 @@
strcpy(addstr, "No Security/Kasumi support");
break;
- case PVR_440SP_RA:
- puts("SP Rev. A");
+ case PVR_440SP_6_RAB:
+ puts("SP Rev. A/B");
+ strcpy(addstr, "RAID 6 support");
break;
- case PVR_440SP_RB:
- puts("SP Rev. B");
+ case PVR_440SP_RAB:
+ puts("SP Rev. A/B");
+ strcpy(addstr, "No RAID 6 support");
break;
+ case PVR_440SP_6_RC:
+ puts("SP Rev. C");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
case PVR_440SP_RC:
puts("SP Rev. C");
+ strcpy(addstr, "No RAID 6 support");
break;
+ case PVR_440SPe_6_RA:
+ puts("SPe Rev. A");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
case PVR_440SPe_RA:
puts("SPe Rev. A");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SPe_6_RB:
+ puts("SPe Rev. B");
+ strcpy(addstr, "RAID 6 support");
break;
case PVR_440SPe_RB:
puts("SPe Rev. B");
+ strcpy(addstr, "No RAID 6 support");
break;
default:
@@ -419,7 +439,7 @@
unsigned int pvr;
pvr = get_pvr();
- if (pvr == PVR_440SPe_RB)
+ if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB))
return 1;
else
return 0;
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 9e24b33..e2aa867 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -31,8 +31,6 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
-#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-
#ifdef CFG_INIT_DCACHE_CS
# if (CFG_INIT_DCACHE_CS == 0)
# define PBxAP pb0ap
@@ -221,6 +219,10 @@
void
cpu_init_f (void)
{
+#if defined(CONFIG_WATCHDOG)
+ unsigned long val;
+#endif
+
#if defined(CONFIG_405EP)
/*
* GPIO0 setup (select GPIO or alternate function)
@@ -312,12 +314,11 @@
#endif
#if defined (CONFIG_SOLIDCARD3)
-mtebc(epcr, 0xb84ef000);
-*(unsigned long *)0x79000080 = 0x0001;
+ mtebc(epcr, 0xb84ef000);
+ *(unsigned long *)0x79000080 = 0x0001;
#endif
-#if defined(CONFIG_WATCHDOG)
- unsigned long val;
+#if defined(CONFIG_WATCHDOG)
val = mfspr(tcr);
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index f06038e..294b89c 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -380,7 +380,7 @@
mtsdram(mem_b0cr, mb0cf[i].reg);
mtsdram(mem_tr0, 0x41094012);
mtsdram(mem_tr1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
- mtsdram(mem_rtr, 0x7e000000); /* Interval 15.20µs @ 133MHz PLB*/
+ mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */
mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/
udelay(400); /* Delay 200 usecs (min) */
diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c
index 7fdf57b..8495829 100644
--- a/drivers/nand/nand_base.c
+++ b/drivers/nand/nand_base.c
@@ -2338,7 +2338,7 @@
mtd->oobblock = 1024 << (extid & 0x3);
extid >>= 2;
/* Calc oobsize */
- mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
+ mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock / 512);
extid >>= 2;
/* Calc blocksize. Blocksize is multiples of 64KiB */
mtd->erasesize = (64 * 1024) << (extid & 0x03);
diff --git a/dtt/Makefile b/dtt/Makefile
index 79d4e9f..e6cb128 100644
--- a/dtt/Makefile
+++ b/dtt/Makefile
@@ -30,7 +30,7 @@
LIB = $(obj)libdtt.a
-COBJS = lm75.o ds1621.o adm1021.o
+COBJS = lm75.o ds1621.o adm1021.o lm81.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/dtt/lm81.c b/dtt/lm81.c
new file mode 100644
index 0000000..03bc53d
--- /dev/null
+++ b/dtt/lm81.c
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, DENX Software Enginnering <hs@denx.de>
+ *
+ * based on dtt/lm75.c which is ...
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * On Semiconductor's LM81 Temperature Sensor
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DTT_LM81
+#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
+ (CFG_EEPROM_PAGE_WRITE_BITS < 1)
+# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM81"
+#endif
+
+#include <i2c.h>
+#include <dtt.h>
+
+/*
+ * Device code
+ */
+#define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */
+
+int dtt_read(int sensor, int reg)
+{
+ int dlen = 1;
+ uchar data[2];
+
+ /*
+ * Calculate sensor address and register.
+ */
+ sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */
+
+ /*
+ * Now try to read the register.
+ */
+ if (i2c_read(sensor, reg, 1, data, dlen) != 0)
+ return -1;
+
+ return (int)data[0];
+} /* dtt_read() */
+
+
+int dtt_write(int sensor, int reg, int val)
+{
+ uchar data;
+
+ /*
+ * Calculate sensor address and register.
+ */
+ sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */
+
+ data = (char)(val & 0xff);
+
+ /*
+ * Write value to register.
+ */
+ if (i2c_write(sensor, reg, 1, &data, 1) != 0)
+ return 1;
+
+ return 0;
+} /* dtt_write() */
+
+#define DTT_MANU 0x3e
+#define DTT_REV 0x3f
+#define DTT_CONFIG 0x40
+#define DTT_ADR 0x48
+
+static int _dtt_init(int sensor)
+{
+ int man;
+ int adr;
+ int rev;
+
+ if (dtt_write (sensor, DTT_CONFIG, 0x01) < 0)
+ return 1;
+ /* The LM81 needs 400ms to get the correct values ... */
+ udelay (400000);
+ man = dtt_read (sensor, DTT_MANU);
+ if (man != 0x01)
+ return 1;
+ adr = dtt_read (sensor, DTT_ADR);
+ if (adr < 0)
+ return 1;
+ rev = dtt_read (sensor, DTT_REV);
+ if (adr < 0)
+ return 1;
+
+ printf ("DTT: Found LM81@%x Rev: %d\n", adr, rev);
+ return 0;
+} /* _dtt_init() */
+
+
+int dtt_init (void)
+{
+ int i;
+ unsigned char sensors[] = CONFIG_DTT_SENSORS;
+ const char *const header = "DTT: ";
+
+ for (i = 0; i < sizeof(sensors); i++) {
+ if (_dtt_init(sensors[i]) != 0)
+ printf("%s%d FAILED INIT\n", header, i+1);
+ else
+ printf("%s%d is %i C\n", header, i+1,
+ dtt_get_temp(sensors[i]));
+ }
+
+ return (0);
+} /* dtt_init() */
+
+#define TEMP_FROM_REG(temp) \
+ ((temp)<256?((((temp)&0x1fe) >> 1) * 10) + ((temp) & 1) * 5: \
+ ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5) \
+
+int dtt_get_temp(int sensor)
+{
+ int val = dtt_read (sensor, DTT_READ_TEMP);
+ int tmpcnf = dtt_read (sensor, DTT_CONFIG_TEMP);
+
+ return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10;
+} /* dtt_get_temp() */
+
+#endif /* CONFIG_DTT_LM81 */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 6619686..f102600 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -747,11 +747,14 @@
#define PVR_440GX_RC 0x51B21892
#define PVR_440GX_RF 0x51B21894
#define PVR_405EP_RB 0x51210950
-#define PVR_440SP_RA 0x53221850
-#define PVR_440SP_RB 0x53221891
-#define PVR_440SP_RC 0x53221892
-#define PVR_440SPe_RA 0x53421890
-#define PVR_440SPe_RB 0x53421891
+#define PVR_440SP_6_RAB 0x53221850 /* 440SP rev A&B with RAID 6 support enabled */
+#define PVR_440SP_RAB 0x53321850 /* 440SP rev A&B without RAID 6 support */
+#define PVR_440SP_6_RC 0x53221891 /* 440SP rev C with RAID 6 support enabled */
+#define PVR_440SP_RC 0x53321891 /* 440SP rev C without RAID 6 support */
+#define PVR_440SPe_6_RA 0x53421890 /* 440SPe rev A with RAID 6 support enabled */
+#define PVR_440SPe_RA 0x53521890 /* 440SPe rev A without RAID 6 support */
+#define PVR_440SPe_6_RB 0x53421891 /* 440SPe rev B with RAID 6 support enabled */
+#define PVR_440SPe_RB 0x53521891 /* 440SPe rev B without RAID 6 support */
#define PVR_601 0x00010000
#define PVR_602 0x00050000
#define PVR_603 0x00030000
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 08674ca..7069b35 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -231,6 +231,17 @@
"protect on FC000000 +${filesize}\0"
#endif
+#ifndef CONFIG_CAM5200
+#define CUSTOM_ENV_SETTINGS \
+ "bootfile=/tftpboot/tqm5200/uImage\0" \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin\0"
+#else
+#define CUSTOM_ENV_SETTINGS \
+ "bootfile=cam5200/uImage\0" \
+ "u-boot=cam5200/u-boot.bin\0" \
+ "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
@@ -248,8 +259,7 @@
"bootm ${kernel_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \
"bootm\0" \
- "bootfile=/tftpboot/tqm5200/uImage\0" \
- "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
+ CUSTOM_ENV_SETTINGS \
"load=tftp 200000 ${u-boot}\0" \
ENV_UPDT \
""
@@ -325,15 +335,7 @@
*/
#define CFG_FLASH_BASE 0xFC000000
-#ifndef CONFIG_CAM5200
-/* use CFI flash driver */
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
- (= chip selects) */
-#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
-#else /* CONFIG_CAM5200 */
+#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks
(= chip selects) */
#define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */
@@ -344,7 +346,15 @@
#define CFG_FLASH_ADDR1 0x2AA
#define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */
#define CFG_MAX_FLASH_SECT 128
-#endif /* ifndef CONFIG_CAM5200 */
+#else
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#endif
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index bbe6b76..49027da 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -166,8 +166,23 @@
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load;run update\0" \
+ "ethprime=ppc_4xx_eth3\0" \
+ "ethact=ppc_4xx_eth3\0" \
+ "autoload=no\0" \
+ "ipconfig=dhcp;setenv serverip 11.0.0.152\0" \
+ "actkernel=kernel2\0" \
+ "load_fpga=fpga load 0 ffe00000 10dd9a\0" \
+ "mtdargs=setenv bootargs root=/dev/mtdblock6 rw " \
+ "rootfstype=jffs2 init=/sbin/init\0" \
+ "kernel1_mtd=nand read 200000 0 200000;run mtdargs addip addtty"\
+ ";bootm 200000\0" \
+ "kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip " \
+ "addtty;bootm 200000\0" \
+ "kernel1=run ipconfig load_fpga kernel1_mtd\0" \
+ "kernel2=run ipconfig load_fpga kernel2_mtd\0" \
""
-#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_BOOTCOMMAND "run kernel2"
#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */
@@ -291,6 +306,8 @@
/*-----------------------------------------------------------------------
* Definitions for GPIO setup
*-----------------------------------------------------------------------*/
+#define CFG_GPIO_SHUTDOWN (0x80000000 >> 6)
+#define CFG_GPIO_SSD_EMPTY (0x80000000 >> 9)
#define CFG_GPIO_EREADY (0x80000000 >> 26)
#define CFG_GPIO_REV0 (0x80000000 >> 14)
#define CFG_GPIO_REV1 (0x80000000 >> 15)
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 00b9222..e7f0108 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -188,7 +188,10 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM (256) /* 256MB */
+#define CFG_MBYTES_SDRAM (256) /* 256MB */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
+#endif
/*-----------------------------------------------------------------------
* I2C
diff --git a/include/configs/SOLIDCARD3.h b/include/configs/solidcard3.h
similarity index 90%
rename from include/configs/SOLIDCARD3.h
rename to include/configs/solidcard3.h
index 16e68b5..867cba5 100644
--- a/include/configs/SOLIDCARD3.h
+++ b/include/configs/solidcard3.h
@@ -94,7 +94,7 @@
* define CONFIG_BAUDRATE to the baudrate value you want to use as default
*/
#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
@@ -137,7 +137,7 @@
#define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */
#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
+ (CONFIG_CMD_DFL | \
CFG_CMD_PCI | \
CFG_CMD_IRQ | \
CFG_CMD_NET | \
@@ -183,8 +183,8 @@
* Consider the OPB clock! If it get lower the BASE_BAUD must be lower to
* (see 405GP datasheet for descritpion)
*/
-#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
-#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
#define CFG_BASE_BAUD 921600 /* internal clock */
/* The following table includes the supported baudrates */
@@ -201,7 +201,7 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define I2C_INIT
#define I2C_ACTIVE 0
@@ -217,26 +217,26 @@
* PCI stuff
*-----------------------------------------------------------------------
*/
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
- /* resource configuration */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
/* If you want to see, whats connected to your PCI bus */
/* #define CONFIG_PCI_SCAN_SHOW */
-#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
-#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
-#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
/*-----------------------------------------------------------------------
* External peripheral base address
@@ -244,8 +244,8 @@
*/
#if !(CONFIG_COMMANDS & CFG_CMD_IDE)
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* no reset for ide supported */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#undef CONFIG_IDE_RESET /* no reset for ide supported */
/*-----------------------------------------------------------------------
* IDE/ATA stuff
@@ -254,9 +254,9 @@
#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
#define CONFIG_START_IDE 1 /* check, if use IDE */
-#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* no reset for ide supported */
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#undef CONFIG_IDE_RESET /* no reset for ide supported */
#define CONFIG_ATAPI
#define CONFIG_DOS_PARTITION
@@ -345,7 +345,7 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
- * FLASH organization // FIXME: lookup in datasheet
+ * FLASH organization ## FIXME: lookup in datasheet
*/
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
@@ -360,8 +360,8 @@
#define CFG_ENV_IS_IN_FLASH 1
#if CFG_ENV_IS_IN_FLASH
#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector in bottom type */
- #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
- #define CFG_ENV_SECT_SIZE 0x4000 /* see README - env sector total size */
+ #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+ #define CFG_ENV_SECT_SIZE 0x4000 /* see README - env sector total size */
#endif
/* let us changing anything in our environment */
#define CONFIG_ENV_OVERWRITE
@@ -421,21 +421,21 @@
#undef CFG_INIT_DCACHE_CS
/* Where the internal SRAM starts */
-#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR
/* Where the internal SRAM ends (only offset) */
-#define CFG_INIT_RAM_END 0x0F00
+#define CFG_INIT_RAM_END 0x0F00
/*
CFG_INIT_RAM_ADDR ------> ------------ lower address
- | |
- | ^ |
- | | |
- | | Stack |
+ | |
+ | ^ |
+ | | |
+ | | Stack |
CFG_GBL_DATA_OFFSET ----> ------------
- | |
- | 64 Bytes |
- | |
+ | |
+ | 64 Bytes |
+ | |
CFG_INIT_RAM_END ------> ------------ higher address
(offset only)
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 9d3609a..09bbebd 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -44,19 +44,19 @@
#define CONFIG_BAUDRATE 19200
/* use PLD CLK4 instead of brg */
-#undef CFG_SPC1920_SMC1_CLK4
+#define CFG_SPC1920_SMC1_CLK4
#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */
#define CONFIG_8xx_CPUCLK_DEFAULT 50000000
#define CFG_8xx_CPUCLK_MIN 40000000
#define CFG_8xx_CPUCLK_MAX 133000000
-#define CFG_RESET_ADDRESS 0xf8000000
+#define CFG_RESET_ADDRESS 0xC0000000
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_LAST_STAGE_INIT
-
-#if 1
+#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
@@ -83,12 +83,13 @@
#ifndef CONFIG_COMMANDS
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_ASKENV \
+ | CFG_CMD_DATE \
| CFG_CMD_ECHO \
| CFG_CMD_IMMAP \
| CFG_CMD_JFFS2 \
| CFG_CMD_PING \
| CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
+ | CFG_CMD_I2C \
| CFG_CMD_MII)
/* & ~( CFG_CMD_NET)) */
@@ -193,13 +194,39 @@
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#ifdef CFG_CMD_DATE
+# define CONFIG_RTC_DS3231
+# define CFG_I2C_RTC_ADDR 0x68
+#endif
+
/*-----------------------------------------------------------------------
* I2C configuration
*/
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */
-#define CFG_I2C_SLAVE 0x7F
+/* enable I2C and select the hardware/software driver */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+
+#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */
+#define CFG_I2C_SLAVE 0xFE
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PB_SCL 0x00000020 /* PB 26 */
+#define PB_SDA 0x00000010 /* PB 27 */
+
+#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
+#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
+#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
#endif
/*-----------------------------------------------------------------------
@@ -220,7 +247,7 @@
*-----------------------------------------------------------------------
* PCMCIA config., multi-function pin tri-state
*/
-#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CFG_SIUMCR (SIUMCR_FRC)
/*-----------------------------------------------------------------------
* TBSCR - Time Base Status and Control 11-26
@@ -283,7 +310,7 @@
* FLASH timing:
*/
#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
- OR_SCY_3_CLK | OR_EHTR | OR_BI)
+ OR_SCY_6_CLK | OR_EHTR | OR_BI)
#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
@@ -329,8 +356,57 @@
MBMR_WLFB_1X | \
MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
+
+/*
+ * DSP Host Port Interface CS3
+ */
+#define CFG_SPC1920_HPI_BASE 0x90000000
+#define CFG_PRELIM_OR3_AM 0xF8000000
+
+#define CFG_OR3 (CFG_PRELIM_OR3_AM | \
+ OR_G5LS | \
+ OR_SCY_0_CLK | \
+ OR_BI)
+
+#define CFG_BR3 ((CFG_SPC1920_HPI_BASE & BR_BA_MSK) | \
+ BR_MS_UPMA | \
+ BR_PS_16 | \
+ BR_V);
-/* PLD CS5 */
+#define CFG_MAMR (MAMR_GPL_A4DIS | \
+ MAMR_RLFA_5X | \
+ MAMR_WLFA_5X)
+
+#define CONFIG_SPC1920_HPI_TEST
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+#define HPI_REG(x) (*((volatile u16 *) (CFG_SPC1920_HPI_BASE + x)))
+#define HPI_HPIC_1 HPI_REG(0)
+#define HPI_HPIC_2 HPI_REG(2)
+#define HPI_HPIA_1 HPI_REG(0x2000008)
+#define HPI_HPIA_2 HPI_REG(0x2000008 + 2)
+#define HPI_HPID_INC_1 HPI_REG(0x1000004)
+#define HPI_HPID_INC_2 HPI_REG(0x1000004 + 2)
+#define HPI_HPID_NOINC_1 HPI_REG(0x300000c)
+#define HPI_HPID_NOINC_2 HPI_REG(0x300000c + 2)
+#endif /* CONFIG_SPC1920_HPI_TEST */
+
+/*
+ * Ramtron FM18L08 FRAM 32KB on CS4
+ */
+#define CFG_SPC1920_FRAM_BASE 0x80100000
+#define CFG_PRELIM_OR4_AM 0xffff8000
+#define CFG_OR4 (CFG_PRELIM_OR4_AM | \
+ OR_ACS_DIV2 | \
+ OR_BI | \
+ OR_SCY_4_CLK | \
+ OR_TRLX)
+
+#define CFG_BR4 ((CFG_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
+
+/*
+ * PLD CS5
+ */
#define CFG_SPC1920_PLD_BASE 0x80000000
#define CFG_PRELIM_OR5_AM 0xffff8000
@@ -343,10 +419,6 @@
#define CFG_BR5_PRELIM ((CFG_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
-/* #define CFG_PLD_BASE 0x30000000 */
-/* #define CFG_OR5_PRELIM 0xffff1110 */
-/* #define CFG_BR5_PRELIM 0x30000401 */
-
/*
* Internal Definitions
*
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
new file mode 100644
index 0000000..8cd8e9b
--- /dev/null
+++ b/include/configs/uc101.h
@@ -0,0 +1,353 @@
+/*
+ * (C) Copyright 2003-2006
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
+#define CONFIG_UC101 1 /* UC101 board */
+
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DISPLAY | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PING | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_DTT | \
+ CFG_CMD_IDE | \
+ CFG_CMD_FAT | \
+ CFG_CMD_NFS | \
+ CFG_CMD_MII | \
+ CFG_CMD_SNTP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
+
+#if (TEXT_BASE == 0xFFF00000) /* Boot low */
+# define CFG_LOWBOOT 1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addwdt=setenv bootargs ${bootargs} wdt=off" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "net_nfs=tftp 300000 ${bootfile};run nfsargs addip addwdt;bootm\0" \
+ "rootpath=/opt/eldk/ppc_82xx\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+
+#define CONFIG_MISC_INIT_R 1
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x58
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+/* for LM81 */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR 0x51
+
+/* I2C SYSMON (LM75) */
+#define CONFIG_DTT_LM81 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
+#define CFG_DTT_MAX_TEMP 70
+#define CFG_DTT_LOW_TEMP -30
+#define CFG_DTT_HYSTERESIS 3
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE 0xFF800000
+
+#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */
+#define CFG_MAX_FLASH_SECT 140 /* max num of sects on one chip */
+
+#define CFG_ENV_ADDR (TEXT_BASE+0x40000) /* second sector */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_CFI_AMD_RESET
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x4000
+#define CFG_ENV_SECT_SIZE 0x10000
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SRAM_BASE 0x80100000 /* CS 1 */
+#define CFG_DISPLAY_BASE 0x80600000 /* CS 3 */
+#define CFG_IB_MASTER 0xc0510000 /* CS 6 */
+#define CFG_IB_EPLD 0xc0500000 /* CS 7 */
+
+/* Settings for XLB = 132 MHz */
+#define SDRAM_DDR 1
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x714f0f00
+#define SDRAM_CONFIG1 0x73722930
+#define SDRAM_CONFIG2 0x47770000
+#define SDRAM_TAPDELAY 0x10000000
+
+/* SRAM */
+#define SRAM_BASE CFG_SRAM_BASE /* SRAM base address */
+#define SRAM_LEN 0x1fffff
+#define SRAM_END (SRAM_BASE + SRAM_LEN)
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#endif
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
+#define CFG_MALLOC_LEN (512 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_PHY_ADDR 0x00
+#define CONFIG_MII 1
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG 0x4d558044
+
+/*use Hardware WDT */
+#define CONFIG_HW_WATCHDOG
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+/* Enable an alternate, more extensive memory test */
+#define CFG_ALT_MEMTEST
+
+#define CFG_MEMTEST_START 0x00300000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 3 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x300000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+#else
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+#endif
+
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x00045D00
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+/* 8Mbit SRAM @0x80100000 */
+#define CFG_CS1_START CFG_SRAM_BASE
+#define CFG_CS1_SIZE 0x00100000
+#define CFG_CS1_CFG 0x21D00
+
+/* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */
+#define CFG_CS3_START CFG_DISPLAY_BASE
+#define CFG_CS3_SIZE 0x00000100
+#define CFG_CS3_CFG 0x00081802
+
+/* Interbus Master 16 Bit */
+#define CFG_CS6_START CFG_IB_MASTER
+#define CFG_CS6_SIZE 0x00010000
+#define CFG_CS6_CFG 0x00FF3500
+
+/* Interbus EPLD 8 Bit */
+#define CFG_CS7_START CFG_IB_EPLD
+#define CFG_CS7_SIZE 0x00010000
+#define CFG_CS7_CFG 0x00081800
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333333
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
+
+#define CONFIG_IDE_PREINIT 1
+/* #define CONFIG_IDE_RESET 1 beispile siehe tqm5200.c */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
+
+#define CONFIG_ATAPI 1
+
+/*---------------------------------------------------------------------*/
+/* Display addresses */
+/*---------------------------------------------------------------------*/
+#define CFG_DISP_CHR_RAM (CFG_DISPLAY_BASE + 0x38)
+#define CFG_DISP_CWORD (CFG_DISPLAY_BASE + 0x30)
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 554a7a4..e19591d 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -39,6 +39,7 @@
#define CONFIG_NETCONSOLE 1
#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* do board-specific init */
#define CFG_XLB_PIPELINING 1 /* gives better performance */
@@ -101,7 +102,7 @@
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
- CFG_CMD_SDRAMi | \
+ CFG_CMD_SDRAM | \
CFG_CMD_DATE | \
CFG_CMD_USB | \
CFG_CMD_FAT)
@@ -135,7 +136,7 @@
"preboot=echo;echo Type \"run flash_nfs\" to mount root " \
"filesystem over NFS; echo\0" \
"netdev=eth0\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw wdt=off \0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
"$(netmask):$(hostname):$(netdev):off panic=1\0" \
@@ -144,7 +145,7 @@
"$(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$(serverip):$(rootpath)\0" \
+ "nfsroot=$(serverip):$(rootpath) wdt=off\0" \
"hostname=v38b\0" \
"ethact=FEC ETHERNET\0" \
"rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index 58717f8..911a52d 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -302,6 +302,20 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+#define CFG_CPLD 0x80000000
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x03017300
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000)
+
+/* Memory Bank 2 (CPLD) initialization */
+#define CFG_EBC_PB2AP 0x04814500
+#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000)
+
+/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 6e942ab..2cc18db 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -307,6 +307,20 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+#define CFG_CPLD 0x80000000
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x03017300
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000)
+
+/* Memory Bank 2 (CPLD) initialization */
+#define CFG_EBC_PB2AP 0x04814500
+#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000)
+
+/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
diff --git a/include/dtt.h b/include/dtt.h
index a17aa67..842a761 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -29,6 +29,7 @@
#if defined(CONFIG_DTT_LM75) || \
defined(CONFIG_DTT_DS1621) || \
+ defined(CONFIG_DTT_LM81) || \
defined(CONFIG_DTT_ADM1021)
#define CONFIG_DTT /* We have a DTT */
@@ -58,6 +59,14 @@
#define DTT_TEMP_SET 0x3
#endif
+#if defined(CONFIG_DTT_LM81)
+#define DTT_READ_TEMP 0x27
+#define DTT_CONFIG_TEMP 0x4b
+#define DTT_TEMP_MAX 0x39
+#define DTT_TEMP_HYST 0x3a
+#define DTT_CONFIG 0x40
+#endif
+
#if defined(CONFIG_DTT_DS1621)
#define DTT_READ_TEMP 0xAA
#define DTT_READ_COUNTER 0xA8
diff --git a/include/ppc440.h b/include/ppc440.h
index 50f4ec4..91cff41 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -887,12 +887,14 @@
/* PLB4 Arbiter - PowerPC440EP Pass1 */
#define PLB4_DCR_BASE 0x080
+#define plb4_acr (PLB4_DCR_BASE+0x1)
#define plb4_revid (PLB4_DCR_BASE+0x2)
-#define plb4_acr (PLB4_DCR_BASE+0x3)
#define plb4_besr (PLB4_DCR_BASE+0x4)
#define plb4_bearl (PLB4_DCR_BASE+0x6)
#define plb4_bearh (PLB4_DCR_BASE+0x7)
+#define PLB4_ACR_WRP (0x80000000 >> 7)
+
/* Nebula PLB4 Arbiter - PowerPC440EP */
#define PLB_ARBITER_BASE 0x80
@@ -3284,26 +3286,26 @@
/*
* Macros for accessing the indirect EBC registers
*/
-#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
+#define mtebc(reg, data) { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); }
+#define mfebc(reg, data) { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); }
/*
* Macros for accessing the indirect SDRAM controller registers
*/
-#define mtsdram(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-#define mfsdram(reg, data) mtdcr(memcfga,reg);data = mfdcr(memcfgd)
+#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); }
+#define mfsdram(reg, data) { mtdcr(memcfga,reg);data = mfdcr(memcfgd); }
/*
* Macros for accessing the indirect clocking controller registers
*/
-#define mtclk(reg, data) mtdcr(clkcfga,reg);mtdcr(clkcfgd,data)
-#define mfclk(reg, data) mtdcr(clkcfga,reg);data = mfdcr(clkcfgd)
+#define mtclk(reg, data) { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); }
+#define mfclk(reg, data) { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); }
/*
* Macros for accessing the sdr controller registers
*/
-#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data)
-#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd)
+#define mtsdr(reg, data) { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); }
+#define mfsdr(reg, data) { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); }
#ifndef __ASSEMBLY__
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index a71f583..b42da8c 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -76,7 +76,9 @@
$(obj)sdram.c:
@rm -f $(obj)sdram.c
+ @rm -f $(obj)sdram.h
ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $(obj)sdram.c
+ ln -s $(SRCTREE)/board/amcc/sequoia/sdram.h $(obj)sdram.h
# from nand_spl directory
$(obj)nand_boot.c:
diff --git a/rtc/Makefile b/rtc/Makefile
index cf2b24e..cdc8ac9 100644
--- a/rtc/Makefile
+++ b/rtc/Makefile
@@ -29,7 +29,7 @@
COBJS = date.o \
bf533_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \
- ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o \
+ ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \
m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \
mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o
diff --git a/rtc/ds3231.c b/rtc/ds3231.c
new file mode 100644
index 0000000..50aeeb5
--- /dev/null
+++ b/rtc/ds3231.c
@@ -0,0 +1,193 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, mk@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
+ * Extremly Accurate DS3231 Real Time Clock (RTC).
+ *
+ * copied from ds1337.c
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+
+#if defined(CONFIG_RTC_DS3231) && (CONFIG_COMMANDS & CFG_CMD_DATE)
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_RTC
+
+#ifdef DEBUG_RTC
+#define DEBUGR(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGR(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+/*
+ * RTC register addresses
+ */
+#define RTC_SEC_REG_ADDR 0x0
+#define RTC_MIN_REG_ADDR 0x1
+#define RTC_HR_REG_ADDR 0x2
+#define RTC_DAY_REG_ADDR 0x3
+#define RTC_DATE_REG_ADDR 0x4
+#define RTC_MON_REG_ADDR 0x5
+#define RTC_YR_REG_ADDR 0x6
+#define RTC_CTL_REG_ADDR 0x0e
+#define RTC_STAT_REG_ADDR 0x0f
+
+
+/*
+ * RTC control register bits
+ */
+#define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */
+#define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */
+#define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */
+#define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */
+#define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */
+#define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */
+
+/*
+ * RTC status register bits
+ */
+#define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */
+#define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */
+#define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */
+
+
+static uchar rtc_read (uchar reg);
+static void rtc_write (uchar reg, uchar val);
+static uchar bin2bcd (unsigned int n);
+static unsigned bcd2bin (uchar c);
+
+
+/*
+ * Get the current time from the RTC
+ */
+void rtc_get (struct rtc_time *tmp)
+{
+ uchar sec, min, hour, mday, wday, mon_cent, year, control, status;
+
+ control = rtc_read (RTC_CTL_REG_ADDR);
+ status = rtc_read (RTC_STAT_REG_ADDR);
+ sec = rtc_read (RTC_SEC_REG_ADDR);
+ min = rtc_read (RTC_MIN_REG_ADDR);
+ hour = rtc_read (RTC_HR_REG_ADDR);
+ wday = rtc_read (RTC_DAY_REG_ADDR);
+ mday = rtc_read (RTC_DATE_REG_ADDR);
+ mon_cent = rtc_read (RTC_MON_REG_ADDR);
+ year = rtc_read (RTC_YR_REG_ADDR);
+
+ DEBUGR ("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
+ "hr: %02x min: %02x sec: %02x control: %02x status: %02x\n",
+ year, mon_cent, mday, wday, hour, min, sec, control, status);
+
+ if (status & RTC_STAT_BIT_OSF) {
+ printf ("### Warning: RTC oscillator has stopped\n");
+ /* clear the OSF flag */
+ rtc_write (RTC_STAT_REG_ADDR,
+ rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
+ }
+
+ tmp->tm_sec = bcd2bin (sec & 0x7F);
+ tmp->tm_min = bcd2bin (min & 0x7F);
+ tmp->tm_hour = bcd2bin (hour & 0x3F);
+ tmp->tm_mday = bcd2bin (mday & 0x3F);
+ tmp->tm_mon = bcd2bin (mon_cent & 0x1F);
+ tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900);
+ tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
+ tmp->tm_yday = 0;
+ tmp->tm_isdst= 0;
+
+ DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+}
+
+
+/*
+ * Set the RTC
+ */
+void rtc_set (struct rtc_time *tmp)
+{
+ uchar century;
+
+ DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
+
+ century = (tmp->tm_year >= 2000) ? 0x80 : 0;
+ rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century);
+
+ rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
+ rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
+ rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
+ rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
+ rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
+}
+
+
+/*
+ * Reset the RTC. We also enable the oscillator output on the
+ * SQW/INTB* pin and program it for 32,768 Hz output. Note that
+ * according to the datasheet, turning on the square wave output
+ * increases the current drain on the backup battery from about
+ * 600 nA to 2uA.
+ */
+void rtc_reset (void)
+{
+ rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2);
+}
+
+
+/*
+ * Helper functions
+ */
+
+static
+uchar rtc_read (uchar reg)
+{
+ return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+}
+
+
+static void rtc_write (uchar reg, uchar val)
+{
+ i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+}
+
+static unsigned bcd2bin (uchar n)
+{
+ return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+static unsigned char bin2bcd (unsigned int n)
+{
+ return (((n / 10) << 4) | (n % 10));
+}
+
+#endif /* (CONFIG_RTC_DS3231) && (CONFIG_COMMANDS & CFG_CMD_DATE) */