Merge remote branch 'u-boot-at91/for-1.3.4'
diff --git a/MAINTAINERS b/MAINTAINERS
index 1e67b7a..d3dfd48 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -204,6 +204,10 @@
KUP4K MPC855
KUP4X MPC859
+Gary Jennejohn <garyj@denx.de>
+
+ quad100hd PPC405EP
+
Murray Jensen <Murray.Jensen@csiro.au>
cogent_mpc8xx MPC8xx
@@ -698,6 +702,7 @@
ATSTK1002 AT32AP7000
ATSTK1003 AT32AP7001
ATSTK1004 AT32AP7002
+ ATSTK1006 AT32AP7000
ATNGW100 AT32AP7000
#########################################################################
diff --git a/MAKEALL b/MAKEALL
index 8316537..3cb1d24 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -219,6 +219,7 @@
PMC405 \
PMC440 \
PPChameleonEVB \
+ quad100hd \
rainier \
sbc405 \
sc3 \
@@ -718,6 +719,7 @@
atstk1002 \
atstk1003 \
atstk1004 \
+ atstk1006 \
atngw100 \
"
diff --git a/Makefile b/Makefile
index 7e68b23..30b6aef 100644
--- a/Makefile
+++ b/Makefile
@@ -1391,6 +1391,9 @@
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+quad100hd_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
+
sbc405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
@@ -2888,6 +2891,9 @@
atstk1004_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+atstk1006_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
atngw100_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 1ccbe2c..c649855 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -25,12 +25,12 @@
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix2.h>
+#include <asm/arch/hmatrix.h>
DECLARE_GLOBAL_DATA_PTR;
-static const struct sdram_info sdram = {
- .phys_addr = CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+ .data_bits = SDRAM_DATA_16BIT,
.row_bits = 13,
.col_bits = 9,
.bank_bits = 2,
@@ -47,8 +47,8 @@
int board_early_init_f(void)
{
- /* Set the SDRAM_ENABLE bit in the HEBI SFR */
- hmatrix2_writel(SFR4, 1 << 1);
+ /* Enable SDRAM in the EBI mux */
+ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
gpio_enable_ebi();
gpio_enable_usart1();
@@ -66,7 +66,22 @@
long int initdram(int board_type)
{
- return sdram_init(&sdram);
+ unsigned long expected_size;
+ unsigned long actual_size;
+ void *sdram_base;
+
+ sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+ expected_size = sdram_init(sdram_base, &sdram_config);
+ actual_size = get_ram_size(sdram_base, expected_size);
+
+ unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+ if (expected_size != actual_size)
+ printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+
+ return actual_size;
}
void board_init_info(void)
diff --git a/board/atmel/atngw100/u-boot.lds b/board/atmel/atngw100/u-boot.lds
index 34e347a..e736adf 100644
--- a/board/atmel/atngw100/u-boot.lds
+++ b/board/atmel/atngw100/u-boot.lds
@@ -29,17 +29,10 @@
. = 0;
_text = .;
.text : {
+ *(.exception.text)
*(.text)
*(.text.*)
}
-
- . = ALIGN(32);
- __flashprog_start = .;
- .flashprog : {
- *(.flashprog)
- }
- . = ALIGN(32);
- __flashprog_end = .;
_etext = .;
.rodata : {
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 28f64c4..33bdba6 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -25,13 +25,39 @@
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix2.h>
+#include <asm/arch/hmatrix.h>
DECLARE_GLOBAL_DATA_PTR;
-static const struct sdram_info sdram = {
- .phys_addr = CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+#if defined(CONFIG_ATSTK1006)
+ /* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */
+ .data_bits = SDRAM_DATA_32BIT,
+ .row_bits = 13,
+ .col_bits = 9,
+ .bank_bits = 2,
+ .cas = 2,
+ .twr = 2,
+ .trc = 7,
+ .trp = 2,
+ .trcd = 2,
+ .tras = 4,
+ .txsr = 7,
+ /* 7.81 us */
+ .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
+#else
+ /* MT48LC2M32B2P-5 (8 MB) on motherboard */
+#ifdef CONFIG_ATSTK1004
+ .data_bits = SDRAM_DATA_16BIT,
+#else
+ .data_bits = SDRAM_DATA_32BIT,
+#endif
+#ifdef CONFIG_ATSTK1000_16MB_SDRAM
+ /* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */
+ .row_bits = 12,
+#else
.row_bits = 11,
+#endif
.col_bits = 8,
.bank_bits = 2,
.cas = 3,
@@ -43,12 +69,13 @@
.txsr = 5,
/* 15.6 us */
.refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
+#endif
};
int board_early_init_f(void)
{
- /* Set the SDRAM_ENABLE bit in the HEBI SFR */
- hmatrix2_writel(SFR4, 1 << 1);
+ /* Enable SDRAM in the EBI mux */
+ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
gpio_enable_ebi();
gpio_enable_usart1();
@@ -65,7 +92,22 @@
long int initdram(int board_type)
{
- return sdram_init(&sdram);
+ unsigned long expected_size;
+ unsigned long actual_size;
+ void *sdram_base;
+
+ sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+ expected_size = sdram_init(sdram_base, &sdram_config);
+ actual_size = get_ram_size(sdram_base, expected_size);
+
+ unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+ if (expected_size != actual_size)
+ printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+
+ return actual_size;
}
void board_init_info(void)
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index 4047825..12537f3 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -30,7 +30,7 @@
flash_info_t flash_info[1];
-static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info)
+static void flash_identify(uint16_t *flash, flash_info_t *info)
{
unsigned long flags;
@@ -76,7 +76,7 @@
info->size >> 10, info->sector_count);
}
-int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
+int flash_erase(flash_info_t *info, int s_first, int s_last)
{
unsigned long flags;
unsigned long start_time;
@@ -154,7 +154,7 @@
return ERR_OK;
}
-int __flashprog write_buff(flash_info_t *info, uchar *src,
+int write_buff(flash_info_t *info, uchar *src,
ulong addr, ulong count)
{
unsigned long flags;
diff --git a/board/atmel/atstk1000/u-boot.lds b/board/atmel/atstk1000/u-boot.lds
index 247812e..0d3b19c 100644
--- a/board/atmel/atstk1000/u-boot.lds
+++ b/board/atmel/atstk1000/u-boot.lds
@@ -29,17 +29,10 @@
. = 0;
_text = .;
.text : {
+ *(.exception.text)
*(.text)
*(.text.*)
}
-
- . = ALIGN(32);
- __flashprog_start = .;
- .flashprog : {
- *(.flashprog)
- }
- . = ALIGN(32);
- __flashprog_end = .;
_etext = .;
.rodata : {
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c
index a13eeeb..1be72a2 100644
--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -52,7 +52,7 @@
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
index 6da80dc..9bc4d3f 100644
--- a/board/gth2/gth2.c
+++ b/board/gth2/gth2.c
@@ -135,7 +135,7 @@
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c
index 536c954..82b7235 100644
--- a/board/pb1x00/pb1x00.c
+++ b/board/pb1x00/pb1x00.c
@@ -51,7 +51,7 @@
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
diff --git a/board/qemu-mips/qemu-mips.c b/board/qemu-mips/qemu-mips.c
index 6869074..6e6eab2 100644
--- a/board/qemu-mips/qemu-mips.c
+++ b/board/qemu-mips/qemu-mips.c
@@ -38,7 +38,7 @@
u32 proc_id;
u32 config1;
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
printf("Board: Qemu -M mips CPU: ");
switch (proc_id) {
case 0x00018000:
@@ -51,7 +51,7 @@
printf("4KEc");
break;
case 0x00019300:
- config1 = read_mips32_cp0_config1();
+ config1 = read_c0_config1();
if (config1 & 1)
printf("24Kf");
else
@@ -64,7 +64,7 @@
printf("R4000");
break;
case 0x00018100:
- config1 = read_mips32_cp0_config1();
+ config1 = read_c0_config1();
if (config1 & 1)
printf("5Kf");
else
diff --git a/board/quad100hd/Makefile b/board/quad100hd/Makefile
new file mode 100644
index 0000000..252ad5a
--- /dev/null
+++ b/board/quad100hd/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o nand.o
+SOBJS =
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/quad100hd/config.mk b/board/quad100hd/config.mk
new file mode 100644
index 0000000..1bdf5e4
--- /dev/null
+++ b/board/quad100hd/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c
new file mode 100644
index 0000000..a36b89d
--- /dev/null
+++ b/board/quad100hd/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#if defined(CONFIG_CMD_NAND)
+#include <asm/gpio.h>
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+static void quad100hd_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ switch(cmd) {
+ case NAND_CTL_SETCLE:
+ gpio_write_bit(CFG_NAND_CLE, 1);
+ break;
+ case NAND_CTL_CLRCLE:
+ gpio_write_bit(CFG_NAND_CLE, 0);
+ break;
+
+ case NAND_CTL_SETALE:
+ gpio_write_bit(CFG_NAND_ALE, 1);
+ break;
+ case NAND_CTL_CLRALE:
+ gpio_write_bit(CFG_NAND_ALE, 0);
+ break;
+
+ case NAND_CTL_SETNCE:
+ gpio_write_bit(CFG_NAND_CE, 0);
+ break;
+ case NAND_CTL_CLRNCE:
+ gpio_write_bit(CFG_NAND_CE, 1);
+ break;
+ }
+}
+
+static int quad100hd_nand_ready(struct mtd_info *mtd)
+{
+ return gpio_read_in_bit(CFG_NAND_RDY);
+}
+
+/*
+ * Main initialization routine
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+ /* Set address of hardware control function */
+ nand->hwcontrol = quad100hd_hwcontrol;
+ nand->dev_ready = quad100hd_nand_ready;
+ nand->eccmode = NAND_ECC_SOFT;
+ /* 15 us command delay time */
+ nand->chip_delay = 20;
+
+ /* Return happy */
+ return 0;
+}
+#endif /* CONFIG_CMD_NAND */
diff --git a/board/quad100hd/quad100hd.c b/board/quad100hd/quad100hd.c
new file mode 100644
index 0000000..638bd6c
--- /dev/null
+++ b/board/quad100hd/quad100hd.c
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on board/icecube/icecube.c from PPCBoot
+ * (C) Copyright 2003 Intrinsyc Software
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <environment.h>
+#include <logbuff.h>
+#include <post.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /* taken from PPCBoot */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000);
+ mtdcr(uicpr, 0xFFFF7FFE); /* set int polarities */
+ mtdcr(uictr, 0x00000000); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+
+ mtdcr(CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+#ifdef DISPLAY_BOARD_INFO
+ sys_info_t sysinfo;
+#endif
+
+ puts("Board: Quad100hd");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+#ifdef DISPLAY_BOARD_INFO
+ /* taken from ppcboot */
+ get_sys_info(&sysinfo);
+
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tEPB: %lu MHz\n", sysinfo.freqPLB / (sysinfo.pllExtBusDiv *
+ 1000000));
+ printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+#endif
+
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ return CFG_SDRAM_SIZE;
+}
diff --git a/board/quad100hd/u-boot.lds b/board/quad100hd/u-boot.lds
new file mode 100644
index 0000000..195d91b
--- /dev/null
+++ b/board/quad100hd/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/common/usb.c b/common/usb.c
index 52e8472..a0107dc 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -48,6 +48,7 @@
#include <command.h>
#include <asm/processor.h>
#include <linux/ctype.h>
+#include <asm/byteorder.h>
#if defined(CONFIG_CMD_USB)
@@ -177,10 +178,10 @@
/* set setup command */
setup_packet.requesttype = requesttype;
setup_packet.request = request;
- setup_packet.value = swap_16(value);
- setup_packet.index = swap_16(index);
- setup_packet.length = swap_16(size);
- USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X\nvalue 0x%X index 0x%X length 0x%X\n",
+ setup_packet.value = cpu_to_le16(value);
+ setup_packet.index = cpu_to_le16(index);
+ setup_packet.length = cpu_to_le16(size);
+ USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, value 0x%X index 0x%X length 0x%X\n",
request,requesttype,value,index,size);
dev->status=USB_ST_NOT_PROC; /*not yet processed */
@@ -300,7 +301,7 @@
return -1;
}
memcpy(&dev->config, buffer, buffer[0]);
- dev->config.wTotalLength = swap_16(dev->config.wTotalLength);
+ le16_to_cpus(&(dev->config.wTotalLength));
dev->config.no_of_if = 0;
index = dev->config.bLength;
@@ -329,8 +330,7 @@
dev->config.if_desc[ifno].no_of_ep++; /* found an endpoint */
memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
&buffer[index], buffer[index]);
- dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize =
- swap_16(dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize);
+ le16_to_cpus(&(dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize));
USB_PRINTF("if %d, ep %d\n", ifno, epno);
break;
default:
@@ -413,7 +413,7 @@
printf("config descriptor too short (expected %i, got %i)\n",8,result);
return -1;
}
- tmp=swap_16(config->wTotalLength);
+ tmp = le16_to_cpu(config->wTotalLength);
if (tmp > USB_BUFSIZ) {
USB_PRINTF("usb_get_configuration_no: failed to get descriptor - too long: %d\n",
@@ -816,10 +816,10 @@
return 1;
}
/* correct le values */
- dev->descriptor.bcdUSB=swap_16(dev->descriptor.bcdUSB);
- dev->descriptor.idVendor=swap_16(dev->descriptor.idVendor);
- dev->descriptor.idProduct=swap_16(dev->descriptor.idProduct);
- dev->descriptor.bcdDevice=swap_16(dev->descriptor.bcdDevice);
+ le16_to_cpus(&dev->descriptor.bcdUSB);
+ le16_to_cpus(&dev->descriptor.idVendor);
+ le16_to_cpus(&dev->descriptor.idProduct);
+ le16_to_cpus(&dev->descriptor.bcdDevice);
/* only support for one config for now */
usb_get_configuration_no(dev,&tmpbuf[0],0);
usb_parse_config(dev,&tmpbuf[0],0);
@@ -979,8 +979,8 @@
USB_HUB_PRINTF("get_port_status failed status %lX\n",dev->status);
return -1;
}
- portstatus = swap_16(portsts.wPortStatus);
- portchange = swap_16(portsts.wPortChange);
+ portstatus = le16_to_cpu(portsts.wPortStatus);
+ portchange = le16_to_cpu(portsts.wPortChange);
USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus ,portchange,
portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed");
USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d USB_PORT_STAT_ENABLE %d\n",
@@ -1024,8 +1024,8 @@
return;
}
- portstatus = swap_16(portsts.wPortStatus);
- portchange = swap_16(portsts.wPortChange);
+ portstatus = le16_to_cpu(portsts.wPortStatus);
+ portchange = le16_to_cpu(portsts.wPortChange);
USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus, portchange,
portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed");
@@ -1099,7 +1099,7 @@
}
memcpy((unsigned char *)&hub->desc,buffer,descriptor->bLength);
/* adjust 16bit values */
- hub->desc.wHubCharacteristics=swap_16(descriptor->wHubCharacteristics);
+ hub->desc.wHubCharacteristics = le16_to_cpu(descriptor->wHubCharacteristics);
/* set the bitmap */
bitmap=(unsigned char *)&hub->desc.DeviceRemovable[0];
memset(bitmap,0xff,(USB_MAXCHILDREN+1+7)/8); /* devices not removable by default */
@@ -1161,11 +1161,11 @@
}
hubsts = (struct usb_hub_status *)buffer;
USB_HUB_PRINTF("get_hub_status returned status %X, change %X\n",
- swap_16(hubsts->wHubStatus),swap_16(hubsts->wHubChange));
+ le16_to_cpu(hubsts->wHubStatus),le16_to_cpu(hubsts->wHubChange));
USB_HUB_PRINTF("local power source is %s\n",
- (swap_16(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? "lost (inactive)" : "good");
+ (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? "lost (inactive)" : "good");
USB_HUB_PRINTF("%sover-current condition exists\n",
- (swap_16(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? "" : "no ");
+ (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? "" : "no ");
usb_hub_power_on(hub);
for (i = 0; i < dev->maxchild; i++) {
struct usb_port_status portsts;
@@ -1175,8 +1175,8 @@
USB_HUB_PRINTF("get_port_status failed\n");
continue;
}
- portstatus = swap_16(portsts.wPortStatus);
- portchange = swap_16(portsts.wPortChange);
+ portstatus = le16_to_cpu(portsts.wPortStatus);
+ portchange = le16_to_cpu(portsts.wPortChange);
USB_HUB_PRINTF("Port %d Status %X Change %X\n",i+1,portstatus,portchange);
if (portchange & USB_PORT_STAT_C_CONNECTION) {
USB_HUB_PRINTF("port %d connection change\n", i + 1);
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index 11e861d..1e79208 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -26,6 +26,7 @@
*/
#include <common.h>
#include <devices.h>
+#include <asm/byteorder.h>
#ifdef CONFIG_USB_KEYBOARD
@@ -475,14 +476,14 @@
break;
case 2:
if ((end - start) >= 2) {
- item->data.u16 = swap_16((unsigned short *)start);
+ item->data.u16 = le16_to_cpu((unsigned short *)start);
start+=2;
return item->size;
}
case 3:
item->size++;
if ((end - start) >= 4) {
- item->data.u32 = swap_32((unsigned long *)start);
+ item->data.u32 = le32_to_cpu((unsigned long *)start);
start+=4;
return item->size;
}
@@ -705,15 +706,15 @@
}
index=head->bLength;
config=(struct usb_config_descriptor *)&buffer[0];
- len=swap_16(config->wTotalLength);
+ len=le16_to_cpu(config->wTotalLength);
/* Ok the first entry must be a configuration entry, now process the others */
head=(struct usb_descriptor_header *)&buffer[index];
while(index+1 < len) {
if(head->bDescriptorType==USB_DT_HID) {
printf("HID desc found\n");
memcpy(&usb_kbd_hid_desc,&buffer[index],buffer[index]);
- usb_kbd_hid_desc.bcdHID=swap_16(usb_kbd_hid_desc.bcdHID);
- usb_kbd_hid_desc.wDescriptorLength=swap_16(usb_kbd_hid_desc.wDescriptorLength);
+ le16_to_cpus(&usb_kbd_hid_desc.bcdHID);
+ le16_to_cpus(&usb_kbd_hid_desc.wDescriptorLength);
usb_kbd_display_hid(&usb_kbd_hid_desc);
len=0;
break;
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 7c08f95..3e113b4 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -52,6 +52,7 @@
#include <common.h>
#include <command.h>
+#include <asm/byteorder.h>
#include <asm/processor.h>
@@ -474,9 +475,9 @@
/* always OUT to the ep */
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
- cbw.dCBWSignature = swap_32(CBWSIGNATURE);
- cbw.dCBWTag = swap_32(CBWTag++);
- cbw.dCBWDataTransferLength = swap_32(srb->datalen);
+ cbw.dCBWSignature = cpu_to_le32(CBWSIGNATURE);
+ cbw.dCBWTag = cpu_to_le32(CBWTag++);
+ cbw.dCBWDataTransferLength = cpu_to_le32(srb->datalen);
cbw.bCBWFlags = (dir_in? CBWFLAGS_IN : CBWFLAGS_OUT);
cbw.bCBWLUN = srb->lun;
cbw.bCDBLength = srb->cmdlen;
@@ -692,14 +693,14 @@
printf("\n");
#endif
/* misuse pipe to get the residue */
- pipe = swap_32(csw.dCSWDataResidue);
+ pipe = le32_to_cpu(csw.dCSWDataResidue);
if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
pipe = srb->datalen - data_actlen;
- if (CSWSIGNATURE != swap_32(csw.dCSWSignature)) {
+ if (CSWSIGNATURE != le32_to_cpu(csw.dCSWSignature)) {
USB_STOR_PRINTF("!CSWSIGNATURE\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
- } else if ((CBWTag - 1) != swap_32(csw.dCSWTag)) {
+ } else if ((CBWTag - 1) != le32_to_cpu(csw.dCSWTag)) {
USB_STOR_PRINTF("!Tag\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
@@ -1222,18 +1223,9 @@
if(cap[0]>(0x200000 * 10)) /* greater than 10 GByte */
cap[0]>>=16;
#endif
-#ifdef LITTLEENDIAN
- cap[0] = ((unsigned long)(
- (((unsigned long)(cap[0]) & (unsigned long)0x000000ffUL) << 24) |
- (((unsigned long)(cap[0]) & (unsigned long)0x0000ff00UL) << 8) |
- (((unsigned long)(cap[0]) & (unsigned long)0x00ff0000UL) >> 8) |
- (((unsigned long)(cap[0]) & (unsigned long)0xff000000UL) >> 24) ));
- cap[1] = ((unsigned long)(
- (((unsigned long)(cap[1]) & (unsigned long)0x000000ffUL) << 24) |
- (((unsigned long)(cap[1]) & (unsigned long)0x0000ff00UL) << 8) |
- (((unsigned long)(cap[1]) & (unsigned long)0x00ff0000UL) >> 8) |
- (((unsigned long)(cap[1]) & (unsigned long)0xff000000UL) >> 24) ));
-#endif
+ cap[0] = cpu_to_be32(cap[0]);
+ cap[1] = cpu_to_be32(cap[1]);
+
/* this assumes bigendian! */
cap[0] += 1;
capacity = &cap[0];
diff --git a/cpu/at32ap/Makefile b/cpu/at32ap/Makefile
index f69b1f3..d16c58b 100644
--- a/cpu/at32ap/Makefile
+++ b/cpu/at32ap/Makefile
@@ -27,13 +27,19 @@
LIB := $(obj)lib$(CPU).a
-START := start.o
-SOBJS := entry.o
-COBJS := cpu.o hsdramc.o exception.o cache.o
-COBJS += interrupts.o pio.o atmel_mci.o
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
+START-y += start.o
+
+COBJS-y += cpu.o
+COBJS-y += hsdramc.o
+COBJS-y += exception.o
+COBJS-y += cache.o
+COBJS-y += interrupts.o
+COBJS-y += pio.o
+COBJS-$(CONFIG_MMC) += atmel_mci.o
+
+SRCS := $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+START := $(addprefix $(obj),$(START-y))
all: $(obj).depend $(START) $(LIB)
diff --git a/cpu/at32ap/at32ap700x/Makefile b/cpu/at32ap/at32ap700x/Makefile
index d276712..7404235 100644
--- a/cpu/at32ap/at32ap700x/Makefile
+++ b/cpu/at32ap/at32ap700x/Makefile
@@ -24,7 +24,7 @@
LIB := $(obj)lib$(SOC).a
-COBJS := gpio.o
+COBJS := gpio.o clk.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c
new file mode 100644
index 0000000..b3aa034
--- /dev/null
+++ b/cpu/at32ap/at32ap700x/clk.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2005-2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#include "sm.h"
+
+void clk_init(void)
+{
+ uint32_t cksel;
+
+ /* in case of soft resets, disable watchdog */
+ sm_writel(WDT_CTRL, SM_BF(KEY, 0x55));
+ sm_writel(WDT_CTRL, SM_BF(KEY, 0xaa));
+
+#ifdef CONFIG_PLL
+ /* Initialize the PLL */
+ sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
+ | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
+ | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
+ | SM_BF(PLLOPT, CFG_PLL0_OPT)
+ | SM_BF(PLLOSC, 0)
+ | SM_BIT(PLLEN)));
+
+ /* Wait for lock */
+ while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
+#endif
+
+ /* Set up clocks for the CPU and all peripheral buses */
+ cksel = 0;
+ if (CFG_CLKDIV_CPU)
+ cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
+ if (CFG_CLKDIV_HSB)
+ cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
+ if (CFG_CLKDIV_PBA)
+ cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
+ if (CFG_CLKDIV_PBB)
+ cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
+ sm_writel(PM_CKSEL, cksel);
+
+#ifdef CONFIG_PLL
+ /* Use PLL0 as main clock */
+ sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
+#endif
+}
diff --git a/cpu/at32ap/sm.h b/cpu/at32ap/at32ap700x/sm.h
similarity index 100%
rename from cpu/at32ap/sm.h
rename to cpu/at32ap/at32ap700x/sm.h
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
index f59dfb5..3795add 100644
--- a/cpu/at32ap/atmel_mci.c
+++ b/cpu/at32ap/atmel_mci.c
@@ -21,8 +21,6 @@
*/
#include <common.h>
-#ifdef CONFIG_MMC
-
#include <part.h>
#include <mmc.h>
@@ -139,7 +137,7 @@
pr_debug("mmc: status 0x%08lx\n", status);
- if (status & ERROR_FLAGS) {
+ if (status & error_flags) {
printf("mmc: command %lu failed (status: 0x%08lx)\n",
cmd, status);
return -EIO;
@@ -182,12 +180,13 @@
static unsigned long
mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
- unsigned long *buffer)
+ void *buffer)
{
int ret, i = 0;
unsigned long resp[4];
unsigned long card_status, data;
unsigned long wordcount;
+ u32 *p = buffer;
u32 status;
if (blkcnt == 0)
@@ -225,7 +224,7 @@
if (status & MMCI_BIT(RXRDY)) {
data = mmci_readl(RDR);
/* pr_debug("%x\n", data); */
- *buffer++ = data;
+ *p++ = data;
wordcount++;
}
} while(wordcount < (mmc_blkdev.blksz / 4));
@@ -443,6 +442,7 @@
dtocyc = timeout_clks;
dtomul = 0;
+ shift = 0;
while (dtocyc > 15 && dtomul < 8) {
dtomul++;
shift = dtomul_to_shift[dtomul];
@@ -546,5 +546,3 @@
{
return 0;
}
-
-#endif /* CONFIG_MMC */
diff --git a/cpu/at32ap/cpu.c b/cpu/at32ap/cpu.c
index 311466b..0ba8361 100644
--- a/cpu/at32ap/cpu.c
+++ b/cpu/at32ap/cpu.c
@@ -30,7 +30,6 @@
#include <asm/arch/memory-map.h>
#include "hsmc3.h"
-#include "sm.h"
/* Sanity checks */
#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB) \
@@ -44,47 +43,9 @@
DECLARE_GLOBAL_DATA_PTR;
-static void pm_init(void)
-{
- uint32_t cksel;
-
-#ifdef CONFIG_PLL
- /* Initialize the PLL */
- sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
- | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
- | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
- | SM_BF(PLLOPT, CFG_PLL0_OPT)
- | SM_BF(PLLOSC, 0)
- | SM_BIT(PLLEN)));
-
- /* Wait for lock */
- while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
-#endif
-
- /* Set up clocks for the CPU and all peripheral buses */
- cksel = 0;
- if (CFG_CLKDIV_CPU)
- cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
- if (CFG_CLKDIV_HSB)
- cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
- if (CFG_CLKDIV_PBA)
- cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
- if (CFG_CLKDIV_PBB)
- cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
- sm_writel(PM_CKSEL, cksel);
-
- gd->cpu_hz = get_cpu_clk_rate();
-
-#ifdef CONFIG_PLL
- /* Use PLL0 as main clock */
- sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
-#endif
-}
-
int cpu_init(void)
{
extern void _evba(void);
- char *p;
gd->cpu_hz = CFG_OSC0_HZ;
@@ -95,16 +56,15 @@
hsmc3_writel(PULSE0, 0x0b0a0906);
hsmc3_writel(SETUP0, 0x00010002);
- pm_init();
+ clk_init();
+ /* Update the CPU speed according to the PLL configuration */
+ gd->cpu_hz = get_cpu_clk_rate();
+
+ /* Set up the exception handler table and enable exceptions */
sysreg_write(EVBA, (unsigned long)&_evba);
asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET));
- /* Lock everything that mess with the flash in the icache */
- for (p = __flashprog_start; p <= (__flashprog_end + CFG_ICACHE_LINESZ);
- p += CFG_ICACHE_LINESZ)
- asm volatile("cache %0, 0x02" : "=m"(*p) :: "memory");
-
return 0;
}
diff --git a/cpu/at32ap/entry.S b/cpu/at32ap/entry.S
deleted file mode 100644
index a6fc688..0000000
--- a/cpu/at32ap/entry.S
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <asm/sysreg.h>
-#include <asm/ptrace.h>
-
- .section .text.exception,"ax"
- .global _evba
- .type _evba,@function
- .align 10
-_evba:
- .irp x,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
- .align 2
- rjmp unknown_exception
- .endr
-
- .global timer_interrupt_handler
- .type timer_interrupt_handler,@function
- .align 2
-timer_interrupt_handler:
- /*
- * Increment timer_overflow and re-write COMPARE with 0xffffffff.
- *
- * We're running at interrupt level 3, so we don't need to save
- * r8-r12 or lr to the stack.
- */
- lda.w r8, timer_overflow
- ld.w r9, r8[0]
- mov r10, -1
- mtsr SYSREG_COMPARE, r10
- sub r9, -1
- st.w r8[0], r9
- rete
-
- .type unknown_exception, @function
-unknown_exception:
- pushm r0-r12
- sub r8, sp, REG_R12 - REG_R0 - 4
- mov r9, lr
- mfsr r10, SYSREG_RAR_EX
- mfsr r11, SYSREG_RSR_EX
- pushm r8-r11
- mfsr r12, SYSREG_ECR
- mov r11, sp
- rcall do_unknown_exception
-1: rjmp 1b
diff --git a/cpu/at32ap/exception.c b/cpu/at32ap/exception.c
index 0672685..dc9c300 100644
--- a/cpu/at32ap/exception.c
+++ b/cpu/at32ap/exception.c
@@ -111,7 +111,8 @@
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
- if (regs->sp < CFG_SDRAM_BASE || regs->sp >= gd->stack_end)
+ if (regs->sp < (gd->stack_end - CONFIG_STACKSIZE)
+ || regs->sp >= gd->stack_end)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else
dump_mem("\nStack: ", regs->sp, gd->stack_end);
diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c
index 1fcfe75..992612b 100644
--- a/cpu/at32ap/hsdramc.c
+++ b/cpu/at32ap/hsdramc.c
@@ -30,39 +30,32 @@
#include "hsdramc1.h"
-unsigned long sdram_init(const struct sdram_info *info)
+unsigned long sdram_init(void *sdram_base, const struct sdram_config *config)
{
- unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
unsigned long sdram_size;
- unsigned long tmp;
- unsigned long bus_hz;
+ uint32_t cfgreg;
unsigned int i;
- if (!info->refresh_period)
- panic("ERROR: SDRAM refresh period == 0. "
- "Please update the board code\n");
+ cfgreg = (HSDRAMC1_BF(NC, config->col_bits - 8)
+ | HSDRAMC1_BF(NR, config->row_bits - 11)
+ | HSDRAMC1_BF(NB, config->bank_bits - 1)
+ | HSDRAMC1_BF(CAS, config->cas)
+ | HSDRAMC1_BF(TWR, config->twr)
+ | HSDRAMC1_BF(TRC, config->trc)
+ | HSDRAMC1_BF(TRP, config->trp)
+ | HSDRAMC1_BF(TRCD, config->trcd)
+ | HSDRAMC1_BF(TRAS, config->tras)
+ | HSDRAMC1_BF(TXSR, config->txsr));
- tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
- | HSDRAMC1_BF(NR, info->row_bits - 11)
- | HSDRAMC1_BF(NB, info->bank_bits - 1)
- | HSDRAMC1_BF(CAS, info->cas)
- | HSDRAMC1_BF(TWR, info->twr)
- | HSDRAMC1_BF(TRC, info->trc)
- | HSDRAMC1_BF(TRP, info->trp)
- | HSDRAMC1_BF(TRCD, info->trcd)
- | HSDRAMC1_BF(TRAS, info->tras)
- | HSDRAMC1_BF(TXSR, info->txsr));
+ if (config->data_bits == SDRAM_DATA_16BIT)
+ cfgreg |= HSDRAMC1_BIT(DBW);
-#ifdef CFG_SDRAM_16BIT
- tmp |= HSDRAMC1_BIT(DBW);
- sdram_size = 1 << (info->row_bits + info->col_bits
- + info->bank_bits + 1);
-#else
- sdram_size = 1 << (info->row_bits + info->col_bits
- + info->bank_bits + 2);
-#endif
+ hsdramc1_writel(CR, cfgreg);
- hsdramc1_writel(CR, tmp);
+ /* Send a NOP to turn on the clock (necessary on some chips) */
+ hsdramc1_writel(MR, HSDRAMC1_MODE_NOP);
+ hsdramc1_readl(MR);
+ writel(0, sdram_base);
/*
* Initialization sequence for SDRAM, from the data sheet:
@@ -77,7 +70,7 @@
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
hsdramc1_readl(MR);
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 3. Eight auto-refresh (CBR) cycles are provided
@@ -85,58 +78,41 @@
hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
hsdramc1_readl(MR);
for (i = 0; i < 8; i++)
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 4. A mode register set (MRS) cycle is issued to program
* SDRAM parameters, in particular CAS latency and burst
* length.
*
- * CAS from info struct, burst length 1, serial burst type
+ * The address will be chosen by the SDRAMC automatically; we
+ * just have to make sure BA[1:0] are set to 0.
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
hsdramc1_readl(MR);
- writel(0, sdram + (info->cas << 4));
+ writel(0, sdram_base);
/*
- * 5. A Normal Mode command is provided, 3 clocks after tMRD
- * is met.
- *
- * From the timing diagram, it looks like tMRD is 3
- * cycles...try a dummy read from the peripheral bus.
+ * 5. The application must go into Normal Mode, setting Mode
+ * to 0 in the Mode Register and performing a write access
+ * at any location in the SDRAM.
*/
- hsdramc1_readl(MR);
hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
hsdramc1_readl(MR);
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 6. Write refresh rate into SDRAMC refresh timer count
* register (refresh rate = timing between refresh cycles).
- *
- * 15.6 us is a typical value for a burst of length one
*/
- bus_hz = get_sdram_clk_rate();
- hsdramc1_writel(TR, info->refresh_period);
-
- printf("SDRAM: %u MB at address 0x%08lx\n",
- sdram_size >> 20, info->phys_addr);
-
- printf("Testing SDRAM...");
- for (i = 0; i < sdram_size / 4; i++)
- sdram[i] = i;
-
- for (i = 0; i < sdram_size / 4; i++) {
- tmp = sdram[i];
- if (tmp != i) {
- printf("FAILED at address 0x%08lx\n",
- info->phys_addr + i * 4);
- printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);
- return 0;
- }
- }
+ hsdramc1_writel(TR, config->refresh_period);
- puts("OK\n");
+ if (config->data_bits == SDRAM_DATA_16BIT)
+ sdram_size = 1 << (config->row_bits + config->col_bits
+ + config->bank_bits + 1);
+ else
+ sdram_size = 1 << (config->row_bits + config->col_bits
+ + config->bank_bits + 2);
return sdram_size;
}
diff --git a/cpu/at32ap/interrupts.c b/cpu/at32ap/interrupts.c
index bef1f30..160838e 100644
--- a/cpu/at32ap/interrupts.c
+++ b/cpu/at32ap/interrupts.c
@@ -98,18 +98,16 @@
*/
void udelay(unsigned long usec)
{
- unsigned long now, end;
+ unsigned long cycles;
+ unsigned long base;
+ unsigned long now;
- now = sysreg_read(COUNT);
+ base = sysreg_read(COUNT);
+ cycles = ((usec * (get_tbclk() / 10000)) + 50) / 100;
- end = ((usec * (get_tbclk() / 10000)) + 50) / 100;
- end += now;
-
- while (now > end)
- now = sysreg_read(COUNT);
-
- while (now < end)
+ do {
now = sysreg_read(COUNT);
+ } while ((now - base) < cycles);
}
static int set_interrupt_handler(unsigned int nr, void (*handler)(void),
diff --git a/cpu/at32ap/pm.c b/cpu/at32ap/pm.c
deleted file mode 100644
index c78d547..0000000
--- a/cpu/at32ap/pm.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#ifdef CFG_POWER_MANAGER
-#include <asm/errno.h>
-#include <asm/io.h>
-
-#include <asm/arch/memory-map.h>
-
-#include "sm.h"
-
-
-#ifdef CONFIG_PLL
-#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
-#else
-#define MAIN_CLK_RATE (CFG_OSC0_HZ)
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-
-#endif /* CFG_POWER_MANAGER */
diff --git a/cpu/at32ap/start.S b/cpu/at32ap/start.S
index ab8c2b7..907e9b1 100644
--- a/cpu/at32ap/start.S
+++ b/cpu/at32ap/start.S
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2008 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -20,12 +20,9 @@
* MA 02111-1307 USA
*/
#include <config.h>
+#include <asm/ptrace.h>
#include <asm/sysreg.h>
-#ifndef PART_SPECIFIC_BOOTSTRAP
-# define PART_SPECIFIC_BOOTSTRAP
-#endif
-
#define SYSREG_MMUCR_I_OFFSET 2
#define SYSREG_MMUCR_S_OFFSET 4
@@ -34,11 +31,115 @@
| SYSREG_BIT(FE) | SYSREG_BIT(RE) \
| SYSREG_BIT(IBE) | SYSREG_BIT(IEE))
- .text
+ /*
+ * To save some space, we use the same entry point for
+ * exceptions and reset. This avoids lots of alignment padding
+ * since the reset vector is always suitably aligned.
+ */
+ .section .exception.text, "ax", @progbits
.global _start
+ .global _evba
+ .type _start, @function
+ .type _evba, @function
_start:
- PART_SPECIFIC_BOOTSTRAP
+ .size _start, 0
+_evba:
+ .org 0x00
+ rjmp unknown_exception /* Unrecoverable exception */
+ .org 0x04
+ rjmp unknown_exception /* TLB multiple hit */
+ .org 0x08
+ rjmp unknown_exception /* Bus error data fetch */
+ .org 0x0c
+ rjmp unknown_exception /* Bus error instruction fetch */
+ .org 0x10
+ rjmp unknown_exception /* NMI */
+ .org 0x14
+ rjmp unknown_exception /* Instruction address */
+ .org 0x18
+ rjmp unknown_exception /* ITLB protection */
+ .org 0x1c
+ rjmp unknown_exception /* Breakpoint */
+ .org 0x20
+ rjmp unknown_exception /* Illegal opcode */
+ .org 0x24
+ rjmp unknown_exception /* Unimplemented instruction */
+ .org 0x28
+ rjmp unknown_exception /* Privilege violation */
+ .org 0x2c
+ rjmp unknown_exception /* Floating-point */
+ .org 0x30
+ rjmp unknown_exception /* Coprocessor absent */
+ .org 0x34
+ rjmp unknown_exception /* Data Address (read) */
+ .org 0x38
+ rjmp unknown_exception /* Data Address (write) */
+ .org 0x3c
+ rjmp unknown_exception /* DTLB Protection (read) */
+ .org 0x40
+ rjmp unknown_exception /* DTLB Protection (write) */
+ .org 0x44
+ rjmp unknown_exception /* DTLB Modified */
+
+ .org 0x50
+ rjmp unknown_exception /* ITLB Miss */
+ .org 0x60
+ rjmp unknown_exception /* DTLB Miss (read) */
+ .org 0x70
+ rjmp unknown_exception /* DTLB Miss (write) */
+
+ .size _evba, . - _evba
+
+ .align 2
+ .type unknown_exception, @function
+unknown_exception:
+ /* Figure out whether we're handling an exception (Exception
+ * mode) or just booting (Supervisor mode). */
+ csrfcz SYSREG_M1_OFFSET
+ brcc at32ap_cpu_bootstrap
+
+ /* This is an exception. Complain. */
+ pushm r0-r12
+ sub r8, sp, REG_R12 - REG_R0 - 4
+ mov r9, lr
+ mfsr r10, SYSREG_RAR_EX
+ mfsr r11, SYSREG_RSR_EX
+ pushm r8-r11
+ mfsr r12, SYSREG_ECR
+ mov r11, sp
+ rcall do_unknown_exception
+1: rjmp 1b
+
+ /* The COUNT/COMPARE timer interrupt handler */
+ .global timer_interrupt_handler
+ .type timer_interrupt_handler,@function
+ .align 2
+timer_interrupt_handler:
+ /*
+ * Increment timer_overflow and re-write COMPARE with 0xffffffff.
+ *
+ * We're running at interrupt level 3, so we don't need to save
+ * r8-r12 or lr to the stack.
+ */
+ lda.w r8, timer_overflow
+ ld.w r9, r8[0]
+ mov r10, -1
+ mtsr SYSREG_COMPARE, r10
+ sub r9, -1
+ st.w r8[0], r9
+ rete
+ /*
+ * CPU bootstrap after reset is handled here. SoC code may
+ * override this in case they need to initialize oscillators,
+ * etc.
+ */
+ .section .text.at32ap_cpu_bootstrap, "ax", @progbits
+ .global at32ap_cpu_bootstrap
+ .weak at32ap_cpu_bootstrap
+ .type at32ap_cpu_bootstrap, @function
+ .align 2
+at32ap_cpu_bootstrap:
/* Reset the Status Register */
mov r0, lo(SR_INIT)
orh r0, hi(SR_INIT)
@@ -66,9 +167,16 @@
lddpc pc, 1f
.align 2
-1: .long 2f
+1: .long at32ap_low_level_init
+ .size _start, . - _start
-2: lddpc sp, sp_init
+ /* Common CPU bootstrap code after oscillator/cache/etc. init */
+ .section .text.avr32ap_low_level_init, "ax", @progbits
+ .global at32ap_low_level_init
+ .type at32ap_low_level_init, @function
+ .align 2
+at32ap_low_level_init:
+ lddpc sp, sp_init
/* Initialize the GOT pointer */
lddpc r6, got_init
@@ -90,6 +198,7 @@
* Relocate the u-boot image into RAM and continue from there.
* Does not return.
*/
+ .section .text.relocate_code,"ax",@progbits
.global relocate_code
.type relocate_code,@function
relocate_code:
@@ -162,3 +271,5 @@
.align 2
got_init_reloc:
.long 3b - _GLOBAL_OFFSET_TABLE_
+
+ .size relocate_code, . - relocate_code
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
index e267bba..0f58d25 100644
--- a/cpu/mips/cpu.c
+++ b/cpu/mips/cpu.c
@@ -66,10 +66,10 @@
void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
{
- write_32bit_cp0_register(CP0_ENTRYLO0, low0);
- write_32bit_cp0_register(CP0_PAGEMASK, pagemask);
- write_32bit_cp0_register(CP0_ENTRYLO1, low1);
- write_32bit_cp0_register(CP0_ENTRYHI, hi);
- write_32bit_cp0_register(CP0_INDEX, index);
+ write_c0_entrylo0(low0);
+ write_c0_pagemask(pagemask);
+ write_c0_entrylo1(low1);
+ write_c0_entryhi(hi);
+ write_c0_index(index);
tlb_write_indexed();
}
diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci
index c44c501..147ea51 100644
--- a/doc/README.generic_usb_ohci
+++ b/doc/README.generic_usb_ohci
@@ -51,6 +51,12 @@
CONFIG_PCI_OHCI
+If you have several USB PCI controllers, define
+
+ CONFIG_PCI_OHCI_DEVNO: number of the OHCI device in PCI list
+
+If undefined, the first instance found in PCI space will be used.
+
PCI Controllers need to do byte swapping on register accesses, so they
should to define:
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 6c5624a..c82f77b 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -153,6 +153,13 @@
priv_nand->bbt = NULL;
}
+ if (erase_length < meminfo->erasesize) {
+ printf("Warning: Erase size 0x%08x smaller than one " \
+ "erase block 0x%08x\n",erase_length, meminfo->erasesize);
+ printf(" Erasing 0x%08x instead\n", meminfo->erasesize);
+ erase_length = meminfo->erasesize;
+ }
+
for (;
erase.addr < opts->offset + erase_length;
erase.addr += meminfo->erasesize) {
diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c
index ee0f2e4..fd60edb 100644
--- a/drivers/usb/usb_ohci.c
+++ b/drivers/usb/usb_ohci.c
@@ -53,6 +53,9 @@
#if defined(CONFIG_PCI_OHCI)
# include <pci.h>
+#if !defined(CONFIG_PCI_OHCI_DEVNO)
+#define CONFIG_PCI_OHCI_DEVNO 0
+#endif
#endif
#include <malloc.h>
@@ -1218,9 +1221,9 @@
}
bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = cpu_to_le16 (cmd->value);
- wIndex = cpu_to_le16 (cmd->index);
- wLength = cpu_to_le16 (cmd->length);
+ wValue = le16_to_cpu (cmd->value);
+ wIndex = le16_to_cpu (cmd->index);
+ wLength = le16_to_cpu (cmd->length);
info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
@@ -1818,7 +1821,7 @@
gohci.sleeping = 0;
gohci.irq = -1;
#ifdef CONFIG_PCI_OHCI
- pdev = pci_find_devices(ohci_pci_ids, 0);
+ pdev = pci_find_devices(ohci_pci_ids, CONFIG_PCI_OHCI_DEVNO);
if (pdev != -1) {
u16 vid, did;
diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
index 385319a..4a1dd33 100644
--- a/include/asm-avr32/arch-at32ap700x/clk.h
+++ b/include/asm-avr32/arch-at32ap700x/clk.h
@@ -58,7 +58,7 @@
return get_pba_clk_rate();
}
#endif
-#ifdef AT32AP700x_CHIP_HAS_USART
+#ifdef AT32AP700x_CHIP_HAS_MACB
static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
{
return get_pbb_clk_rate();
@@ -75,6 +75,8 @@
}
#endif
+extern void clk_init(void);
+
/* Board code may need the SDRAM base clock as a compile-time constant */
#define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CFG_CLKDIV_HSB)
diff --git a/include/asm-avr32/arch-at32ap700x/hmatrix.h b/include/asm-avr32/arch-at32ap700x/hmatrix.h
new file mode 100644
index 0000000..d6b6263
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/hmatrix.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_HMATRIX_H__
+#define __ASM_AVR32_ARCH_HMATRIX_H__
+
+#include <asm/hmatrix-common.h>
+
+/* Bitfields in SFR4 (EBI) */
+#define HMATRIX_EBI_SDRAM_ENABLE_OFFSET 1
+#define HMATRIX_EBI_SDRAM_ENABLE_SIZE 1
+#define HMATRIX_EBI_NAND_ENABLE_OFFSET 3
+#define HMATRIX_EBI_NAND_ENABLE_SIZE 1
+#define HMATRIX_EBI_CF0_ENABLE_OFFSET 4
+#define HMATRIX_EBI_CF0_ENABLE_SIZE 1
+#define HMATRIX_EBI_CF1_ENABLE_OFFSET 5
+#define HMATRIX_EBI_CF1_ENABLE_SIZE 1
+#define HMATRIX_EBI_PULLUP_DISABLE_OFFSET 8
+#define HMATRIX_EBI_PULLUP_DISABLE_SIZE 1
+
+/* HSB masters */
+#define HMATRIX_MASTER_CPU_DCACHE 0
+#define HMATRIX_MASTER_CPU_ICACHE 1
+#define HMATRIX_MASTER_PDC 2
+#define HMATRIX_MASTER_ISI 3
+#define HMATRIX_MASTER_USBA 4
+#define HMATRIX_MASTER_LCDC 5
+#define HMATRIX_MASTER_MACB0 6
+#define HMATRIX_MASTER_MACB1 7
+#define HMATRIX_MASTER_DMACA_M0 8
+#define HMATRIX_MASTER_DMACA_M1 9
+
+/* HSB slaves */
+#define HMATRIX_SLAVE_SRAM0 0
+#define HMATRIX_SLAVE_SRAM1 1
+#define HMATRIX_SLAVE_PBA 2
+#define HMATRIX_SLAVE_PBB 3
+#define HMATRIX_SLAVE_EBI 4
+#define HMATRIX_SLAVE_USBA 5
+#define HMATRIX_SLAVE_LCDC 6
+#define HMATRIX_SLAVE_DMACA 7
+
+#endif /* __ASM_AVR32_ARCH_HMATRIX_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
deleted file mode 100644
index b0e787a..0000000
--- a/include/asm-avr32/arch-at32ap700x/hmatrix2.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Register definition for the High-speed Bus Matrix
- */
-#ifndef __ASM_AVR32_HMATRIX2_H__
-#define __ASM_AVR32_HMATRIX2_H__
-
-/* HMATRIX2 register offsets */
-#define HMATRIX2_MCFG0 0x0000
-#define HMATRIX2_MCFG1 0x0004
-#define HMATRIX2_MCFG2 0x0008
-#define HMATRIX2_MCFG3 0x000c
-#define HMATRIX2_MCFG4 0x0010
-#define HMATRIX2_MCFG5 0x0014
-#define HMATRIX2_MCFG6 0x0018
-#define HMATRIX2_MCFG7 0x001c
-#define HMATRIX2_MCFG8 0x0020
-#define HMATRIX2_MCFG9 0x0024
-#define HMATRIX2_MCFG10 0x0028
-#define HMATRIX2_MCFG11 0x002c
-#define HMATRIX2_MCFG12 0x0030
-#define HMATRIX2_MCFG13 0x0034
-#define HMATRIX2_MCFG14 0x0038
-#define HMATRIX2_MCFG15 0x003c
-#define HMATRIX2_SCFG0 0x0040
-#define HMATRIX2_SCFG1 0x0044
-#define HMATRIX2_SCFG2 0x0048
-#define HMATRIX2_SCFG3 0x004c
-#define HMATRIX2_SCFG4 0x0050
-#define HMATRIX2_SCFG5 0x0054
-#define HMATRIX2_SCFG6 0x0058
-#define HMATRIX2_SCFG7 0x005c
-#define HMATRIX2_SCFG8 0x0060
-#define HMATRIX2_SCFG9 0x0064
-#define HMATRIX2_SCFG10 0x0068
-#define HMATRIX2_SCFG11 0x006c
-#define HMATRIX2_SCFG12 0x0070
-#define HMATRIX2_SCFG13 0x0074
-#define HMATRIX2_SCFG14 0x0078
-#define HMATRIX2_SCFG15 0x007c
-#define HMATRIX2_PRAS0 0x0080
-#define HMATRIX2_PRBS0 0x0084
-#define HMATRIX2_PRAS1 0x0088
-#define HMATRIX2_PRBS1 0x008c
-#define HMATRIX2_PRAS2 0x0090
-#define HMATRIX2_PRBS2 0x0094
-#define HMATRIX2_PRAS3 0x0098
-#define HMATRIX2_PRBS3 0x009c
-#define HMATRIX2_PRAS4 0x00a0
-#define HMATRIX2_PRBS4 0x00a4
-#define HMATRIX2_PRAS5 0x00a8
-#define HMATRIX2_PRBS5 0x00ac
-#define HMATRIX2_PRAS6 0x00b0
-#define HMATRIX2_PRBS6 0x00b4
-#define HMATRIX2_PRAS7 0x00b8
-#define HMATRIX2_PRBS7 0x00bc
-#define HMATRIX2_PRAS8 0x00c0
-#define HMATRIX2_PRBS8 0x00c4
-#define HMATRIX2_PRAS9 0x00c8
-#define HMATRIX2_PRBS9 0x00cc
-#define HMATRIX2_PRAS10 0x00d0
-#define HMATRIX2_PRBS10 0x00d4
-#define HMATRIX2_PRAS11 0x00d8
-#define HMATRIX2_PRBS11 0x00dc
-#define HMATRIX2_PRAS12 0x00e0
-#define HMATRIX2_PRBS12 0x00e4
-#define HMATRIX2_PRAS13 0x00e8
-#define HMATRIX2_PRBS13 0x00ec
-#define HMATRIX2_PRAS14 0x00f0
-#define HMATRIX2_PRBS14 0x00f4
-#define HMATRIX2_PRAS15 0x00f8
-#define HMATRIX2_PRBS15 0x00fc
-#define HMATRIX2_MRCR 0x0100
-#define HMATRIX2_SFR0 0x0110
-#define HMATRIX2_SFR1 0x0114
-#define HMATRIX2_SFR2 0x0118
-#define HMATRIX2_SFR3 0x011c
-#define HMATRIX2_SFR4 0x0120
-#define HMATRIX2_SFR5 0x0124
-#define HMATRIX2_SFR6 0x0128
-#define HMATRIX2_SFR7 0x012c
-#define HMATRIX2_SFR8 0x0130
-#define HMATRIX2_SFR9 0x0134
-#define HMATRIX2_SFR10 0x0138
-#define HMATRIX2_SFR11 0x013c
-#define HMATRIX2_SFR12 0x0140
-#define HMATRIX2_SFR13 0x0144
-#define HMATRIX2_SFR14 0x0148
-#define HMATRIX2_SFR15 0x014c
-#define HMATRIX2_VERSION 0x01fc
-
-/* Bitfields in MCFG0 */
-#define HMATRIX2_ULBT_OFFSET 0
-#define HMATRIX2_ULBT_SIZE 3
-
-/* Bitfields in SCFG0 */
-#define HMATRIX2_SLOT_CYCLE_OFFSET 0
-#define HMATRIX2_SLOT_CYCLE_SIZE 8
-#define HMATRIX2_DEFMSTR_TYPE_OFFSET 16
-#define HMATRIX2_DEFMSTR_TYPE_SIZE 2
-#define HMATRIX2_FIXED_DEFMSTR_OFFSET 18
-#define HMATRIX2_FIXED_DEFMSTR_SIZE 4
-#define HMATRIX2_ARBT_OFFSET 24
-#define HMATRIX2_ARBT_SIZE 2
-
-/* Bitfields in PRAS0 */
-#define HMATRIX2_M0PR_OFFSET 0
-#define HMATRIX2_M0PR_SIZE 4
-#define HMATRIX2_M1PR_OFFSET 4
-#define HMATRIX2_M1PR_SIZE 4
-#define HMATRIX2_M2PR_OFFSET 8
-#define HMATRIX2_M2PR_SIZE 4
-#define HMATRIX2_M3PR_OFFSET 12
-#define HMATRIX2_M3PR_SIZE 4
-#define HMATRIX2_M4PR_OFFSET 16
-#define HMATRIX2_M4PR_SIZE 4
-#define HMATRIX2_M5PR_OFFSET 20
-#define HMATRIX2_M5PR_SIZE 4
-#define HMATRIX2_M6PR_OFFSET 24
-#define HMATRIX2_M6PR_SIZE 4
-#define HMATRIX2_M7PR_OFFSET 28
-#define HMATRIX2_M7PR_SIZE 4
-
-/* Bitfields in PRBS0 */
-#define HMATRIX2_M8PR_OFFSET 0
-#define HMATRIX2_M8PR_SIZE 4
-#define HMATRIX2_M9PR_OFFSET 4
-#define HMATRIX2_M9PR_SIZE 4
-#define HMATRIX2_M10PR_OFFSET 8
-#define HMATRIX2_M10PR_SIZE 4
-#define HMATRIX2_M11PR_OFFSET 12
-#define HMATRIX2_M11PR_SIZE 4
-#define HMATRIX2_M12PR_OFFSET 16
-#define HMATRIX2_M12PR_SIZE 4
-#define HMATRIX2_M13PR_OFFSET 20
-#define HMATRIX2_M13PR_SIZE 4
-#define HMATRIX2_M14PR_OFFSET 24
-#define HMATRIX2_M14PR_SIZE 4
-#define HMATRIX2_M15PR_OFFSET 28
-#define HMATRIX2_M15PR_SIZE 4
-
-/* Bitfields in MRCR */
-#define HMATRIX2_RBC0_OFFSET 0
-#define HMATRIX2_RBC0_SIZE 1
-#define HMATRIX2_RBC1_OFFSET 1
-#define HMATRIX2_RBC1_SIZE 1
-#define HMATRIX2_RBC2_OFFSET 2
-#define HMATRIX2_RBC2_SIZE 1
-#define HMATRIX2_RBC3_OFFSET 3
-#define HMATRIX2_RBC3_SIZE 1
-#define HMATRIX2_RBC4_OFFSET 4
-#define HMATRIX2_RBC4_SIZE 1
-#define HMATRIX2_RBC5_OFFSET 5
-#define HMATRIX2_RBC5_SIZE 1
-#define HMATRIX2_RBC6_OFFSET 6
-#define HMATRIX2_RBC6_SIZE 1
-#define HMATRIX2_RBC7_OFFSET 7
-#define HMATRIX2_RBC7_SIZE 1
-#define HMATRIX2_RBC8_OFFSET 8
-#define HMATRIX2_RBC8_SIZE 1
-#define HMATRIX2_RBC9_OFFSET 9
-#define HMATRIX2_RBC9_SIZE 1
-#define HMATRIX2_RBC10_OFFSET 10
-#define HMATRIX2_RBC10_SIZE 1
-#define HMATRIX2_RBC11_OFFSET 11
-#define HMATRIX2_RBC11_SIZE 1
-#define HMATRIX2_RBC12_OFFSET 12
-#define HMATRIX2_RBC12_SIZE 1
-#define HMATRIX2_RBC13_OFFSET 13
-#define HMATRIX2_RBC13_SIZE 1
-#define HMATRIX2_RBC14_OFFSET 14
-#define HMATRIX2_RBC14_SIZE 1
-#define HMATRIX2_RBC15_OFFSET 15
-#define HMATRIX2_RBC15_SIZE 1
-
-/* Bitfields in SFR0 */
-#define HMATRIX2_SFR_OFFSET 0
-#define HMATRIX2_SFR_SIZE 32
-
-/* Bitfields in SFR4 */
-#define HMATRIX2_CS1A_OFFSET 1
-#define HMATRIX2_CS1A_SIZE 1
-#define HMATRIX2_CS3A_OFFSET 3
-#define HMATRIX2_CS3A_SIZE 1
-#define HMATRIX2_CS4A_OFFSET 4
-#define HMATRIX2_CS4A_SIZE 1
-#define HMATRIX2_CS5A_OFFSET 5
-#define HMATRIX2_CS5A_SIZE 1
-#define HMATRIX2_DBPUC_OFFSET 8
-#define HMATRIX2_DBPUC_SIZE 1
-
-/* Bitfields in VERSION */
-#define HMATRIX2_VERSION_OFFSET 0
-#define HMATRIX2_VERSION_SIZE 12
-#define HMATRIX2_MFN_OFFSET 16
-#define HMATRIX2_MFN_SIZE 3
-
-/* Constants for ULBT */
-#define HMATRIX2_ULBT_INFINITE 0
-#define HMATRIX2_ULBT_SINGLE 1
-#define HMATRIX2_ULBT_FOUR_BEAT 2
-#define HMATRIX2_ULBT_SIXTEEN_BEAT 4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT 0
-#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT 1
-#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT 2
-
-/* Constants for ARBT */
-#define HMATRIX2_ARBT_ROUND_ROBIN 0
-#define HMATRIX2_ARBT_FIXED_PRIORITY 1
-
-/* Bit manipulation macros */
-#define HMATRIX2_BIT(name) \
- (1 << HMATRIX2_##name##_OFFSET)
-#define HMATRIX2_BF(name,value) \
- (((value) & ((1 << HMATRIX2_##name##_SIZE) - 1)) \
- << HMATRIX2_##name##_OFFSET)
-#define HMATRIX2_BFEXT(name,value) \
- (((value) >> HMATRIX2_##name##_OFFSET) \
- & ((1 << HMATRIX2_##name##_SIZE) - 1))
-#define HMATRIX2_BFINS(name,value,old) \
- (((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1) \
- << HMATRIX2_##name##_OFFSET)) \
- | HMATRIX2_BF(name,value))
-
-/* Register access macros */
-#define hmatrix2_readl(reg) \
- readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
-#define hmatrix2_writel(reg,value) \
- writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
-
-#endif /* __ASM_AVR32_HMATRIX2_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h
index 5513e88..6592c03 100644
--- a/include/asm-avr32/arch-at32ap700x/memory-map.h
+++ b/include/asm-avr32/arch-at32ap700x/memory-map.h
@@ -22,6 +22,26 @@
#ifndef __AT32AP7000_MEMORY_MAP_H__
#define __AT32AP7000_MEMORY_MAP_H__
+/* Internal and external memories */
+#define EBI_SRAM_CS0_BASE 0x00000000
+#define EBI_SRAM_CS0_SIZE 0x04000000
+#define EBI_SRAM_CS4_BASE 0x04000000
+#define EBI_SRAM_CS4_SIZE 0x04000000
+#define EBI_SRAM_CS2_BASE 0x08000000
+#define EBI_SRAM_CS2_SIZE 0x04000000
+#define EBI_SRAM_CS3_BASE 0x0c000000
+#define EBI_SRAM_CS3_SIZE 0x04000000
+#define EBI_SRAM_CS1_BASE 0x10000000
+#define EBI_SRAM_CS1_SIZE 0x10000000
+#define EBI_SRAM_CS5_BASE 0x20000000
+#define EBI_SRAM_CS5_SIZE 0x04000000
+
+#define EBI_SDRAM_BASE EBI_SRAM_CS1_BASE
+#define EBI_SDRAM_SIZE EBI_SRAM_CS1_SIZE
+
+#define INTERNAL_SRAM_BASE 0x24000000
+#define INTERNAL_SRAM_SIZE 0x00008000
+
/* Devices on the High Speed Bus (HSB) */
#define LCDC_BASE 0xFF000000
#define DMAC_BASE 0xFF200000
diff --git a/include/asm-avr32/hmatrix-common.h b/include/asm-avr32/hmatrix-common.h
new file mode 100644
index 0000000..4b7e610
--- /dev/null
+++ b/include/asm-avr32/hmatrix-common.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_HMATRIX_COMMON_H__
+#define __ASM_AVR32_HMATRIX_COMMON_H__
+
+/* HMATRIX register offsets */
+struct hmatrix_regs {
+ u32 MCFG[16];
+ u32 SCFG[16];
+ struct {
+ u32 A;
+ u32 B;
+ } PRS[16];
+ u32 MRCR;
+ u32 __reserved[3];
+ u32 SFR[16];
+};
+
+/* Bitfields in MCFG */
+#define HMATRIX_ULBT_OFFSET 0
+#define HMATRIX_ULBT_SIZE 3
+
+/* Bitfields in SCFG */
+#define HMATRIX_SLOT_CYCLE_OFFSET 0
+#define HMATRIX_SLOT_CYCLE_SIZE 8
+#define HMATRIX_DEFMSTR_TYPE_OFFSET 16
+#define HMATRIX_DEFMSTR_TYPE_SIZE 2
+#define HMATRIX_FIXED_DEFMSTR_OFFSET 18
+#define HMATRIX_FIXED_DEFMSTR_SIZE 4
+#define HMATRIX_ARBT_OFFSET 24
+#define HMATRIX_ARBT_SIZE 1
+
+/* Bitfields in PRS.A */
+#define HMATRIX_M0PR_OFFSET 0
+#define HMATRIX_M0PR_SIZE 4
+#define HMATRIX_M1PR_OFFSET 4
+#define HMATRIX_M1PR_SIZE 4
+#define HMATRIX_M2PR_OFFSET 8
+#define HMATRIX_M2PR_SIZE 4
+#define HMATRIX_M3PR_OFFSET 12
+#define HMATRIX_M3PR_SIZE 4
+#define HMATRIX_M4PR_OFFSET 16
+#define HMATRIX_M4PR_SIZE 4
+#define HMATRIX_M5PR_OFFSET 20
+#define HMATRIX_M5PR_SIZE 4
+#define HMATRIX_M6PR_OFFSET 24
+#define HMATRIX_M6PR_SIZE 4
+#define HMATRIX_M7PR_OFFSET 28
+#define HMATRIX_M7PR_SIZE 4
+
+/* Bitfields in PRS.B */
+#define HMATRIX_M8PR_OFFSET 0
+#define HMATRIX_M8PR_SIZE 4
+#define HMATRIX_M9PR_OFFSET 4
+#define HMATRIX_M9PR_SIZE 4
+#define HMATRIX_M10PR_OFFSET 8
+#define HMATRIX_M10PR_SIZE 4
+#define HMATRIX_M11PR_OFFSET 12
+#define HMATRIX_M11PR_SIZE 4
+#define HMATRIX_M12PR_OFFSET 16
+#define HMATRIX_M12PR_SIZE 4
+#define HMATRIX_M13PR_OFFSET 20
+#define HMATRIX_M13PR_SIZE 4
+#define HMATRIX_M14PR_OFFSET 24
+#define HMATRIX_M14PR_SIZE 4
+#define HMATRIX_M15PR_OFFSET 28
+#define HMATRIX_M15PR_SIZE 4
+
+/* Constants for ULBT */
+#define HMATRIX_ULBT_INFINITE 0
+#define HMATRIX_ULBT_SINGLE 1
+#define HMATRIX_ULBT_FOUR_BEAT 2
+#define HMATRIX_ULBT_EIGHT_BEAT 3
+#define HMATRIX_ULBT_SIXTEEN_BEAT 4
+
+/* Constants for DEFMSTR_TYPE */
+#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0
+#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1
+#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2
+
+/* Constants for ARBT */
+#define HMATRIX_ARBT_ROUND_ROBIN 0
+#define HMATRIX_ARBT_FIXED_PRIORITY 1
+
+/* Bit manipulation macros */
+#define HMATRIX_BIT(name) \
+ (1 << HMATRIX_##name##_OFFSET)
+#define HMATRIX_BF(name,value) \
+ (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \
+ << HMATRIX_##name##_OFFSET)
+#define HMATRIX_BFEXT(name,value) \
+ (((value) >> HMATRIX_##name##_OFFSET) \
+ & ((1 << HMATRIX_##name##_SIZE) - 1))
+#define HMATRIX_BFINS(name,value,old) \
+ (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \
+ << HMATRIX_##name##_OFFSET)) \
+ | HMATRIX_BF(name,value))
+
+/* Register access macros */
+#define __hmatrix_reg(reg) \
+ (((volatile struct hmatrix_regs *)HMATRIX_BASE)->reg)
+#define hmatrix_read(reg) \
+ (__hmatrix_reg(reg))
+#define hmatrix_write(reg, value) \
+ do { __hmatrix_reg(reg) = (value); } while (0)
+
+#define hmatrix_slave_read(slave, reg) \
+ hmatrix_read(reg[HMATRIX_SLAVE_##slave])
+#define hmatrix_slave_write(slave, reg, value) \
+ hmatrix_write(reg[HMATRIX_SLAVE_##slave], value)
+
+#endif /* __ASM_AVR32_HMATRIX_COMMON_H__ */
diff --git a/include/asm-avr32/sdram.h b/include/asm-avr32/sdram.h
index 833af6e..7bdefc1 100644
--- a/include/asm-avr32/sdram.h
+++ b/include/asm-avr32/sdram.h
@@ -22,15 +22,32 @@
#ifndef __ASM_AVR32_SDRAM_H
#define __ASM_AVR32_SDRAM_H
-struct sdram_info {
- unsigned long phys_addr;
- unsigned int row_bits, col_bits, bank_bits;
- unsigned int cas, twr, trc, trp, trcd, tras, txsr;
+struct sdram_config {
+ /* Number of data bits. */
+ enum {
+ SDRAM_DATA_16BIT,
+ SDRAM_DATA_32BIT,
+ } data_bits;
+
+ /* Number of address bits */
+ uint8_t row_bits, col_bits, bank_bits;
+
+ /* SDRAM timings in cycles */
+ uint8_t cas, twr, trc, trp, trcd, tras, txsr;
/* SDRAM refresh period in cycles */
unsigned long refresh_period;
};
-extern unsigned long sdram_init(const struct sdram_info *info);
+/*
+ * Attempt to initialize the SDRAM controller using the specified
+ * parameters. Return the expected size of the memory area based on
+ * the number of address and data bits.
+ *
+ * The caller should verify that the configuration is correct by
+ * running a memory test, e.g. get_ram_size().
+ */
+extern unsigned long sdram_init(void *sdram_base,
+ const struct sdram_config *config);
#endif /* __ASM_AVR32_SDRAM_H */
diff --git a/include/asm-avr32/sections.h b/include/asm-avr32/sections.h
index 75373ab..fe819b2 100644
--- a/include/asm-avr32/sections.h
+++ b/include/asm-avr32/sections.h
@@ -25,15 +25,8 @@
/* References to section boundaries */
extern char _text[], _etext[];
-extern char __flashprog_start[], __flashprog_end[];
extern char _data[], __data_lma[], _edata[], __edata_lma[];
extern char __got_start[], __got_lma[], __got_end[];
extern char _end[];
-/*
- * Everything in .flashprog will be locked in the icache so it doesn't
- * get disturbed when executing flash commands.
- */
-#define __flashprog __attribute__((section(".flashprog"), __noinline__))
-
#endif /* __ASM_AVR32_SECTIONS_H */
diff --git a/include/asm-mips/errno.h b/include/asm-mips/errno.h
new file mode 100644
index 0000000..1665a63
--- /dev/null
+++ b/include/asm-mips/errno.h
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_MIPS_ERRNO_H
+#define _ASM_MIPS_ERRNO_H
+
+/*
+ * These first 34 error codes are from Linux 2.6, <asm-generic/errno-base.h>
+ */
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Argument list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Try again */
+#define ENOMEM 12 /* Out of memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device or resource busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* File table overflow */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math argument out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+
+/*
+ * These error numbers are intended to be MIPS ABI compatible
+ */
+#define ENOMSG 35 /* No message of desired type */
+#define EIDRM 36 /* Identifier removed */
+#define ECHRNG 37 /* Channel number out of range */
+#define EL2NSYNC 38 /* Level 2 not synchronized */
+#define EL3HLT 39 /* Level 3 halted */
+#define EL3RST 40 /* Level 3 reset */
+#define ELNRNG 41 /* Link number out of range */
+#define EUNATCH 42 /* Protocol driver not attached */
+#define ENOCSI 43 /* No CSI structure available */
+#define EL2HLT 44 /* Level 2 halted */
+#define EDEADLK 45 /* Resource deadlock would occur */
+#define ENOLCK 46 /* No record locks available */
+#define EBADE 50 /* Invalid exchange */
+#define EBADR 51 /* Invalid request descriptor */
+#define EXFULL 52 /* Exchange full */
+#define ENOANO 53 /* No anode */
+#define EBADRQC 54 /* Invalid request code */
+#define EBADSLT 55 /* Invalid slot */
+#define EDEADLOCK 56 /* File locking deadlock error */
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EDOTDOT 73 /* RFS specific error */
+#define EMULTIHOP 74 /* Multihop attempted */
+#define EBADMSG 77 /* Not a data message */
+#define ENAMETOOLONG 78 /* File name too long */
+#define EOVERFLOW 79 /* Value too large for defined data type */
+#define ENOTUNIQ 80 /* Name not unique on network */
+#define EBADFD 81 /* File descriptor in bad state */
+#define EREMCHG 82 /* Remote address changed */
+#define ELIBACC 83 /* Can not access a needed shared library */
+#define ELIBBAD 84 /* Accessing a corrupted shared library */
+#define ELIBSCN 85 /* .lib section in a.out corrupted */
+#define ELIBMAX 86 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 87 /* Cannot exec a shared library directly */
+#define EILSEQ 88 /* Illegal byte sequence */
+#define ENOSYS 89 /* Function not implemented */
+#define ELOOP 90 /* Too many symbolic links encountered */
+#define ERESTART 91 /* Interrupted system call should be restarted */
+#define ESTRPIPE 92 /* Streams pipe error */
+#define ENOTEMPTY 93 /* Directory not empty */
+#define EUSERS 94 /* Too many users */
+#define ENOTSOCK 95 /* Socket operation on non-socket */
+#define EDESTADDRREQ 96 /* Destination address required */
+#define EMSGSIZE 97 /* Message too long */
+#define EPROTOTYPE 98 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 99 /* Protocol not available */
+#define EPROTONOSUPPORT 120 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 121 /* Socket type not supported */
+#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 123 /* Protocol family not supported */
+#define EAFNOSUPPORT 124 /* Address family not supported by protocol */
+#define EADDRINUSE 125 /* Address already in use */
+#define EADDRNOTAVAIL 126 /* Cannot assign requested address */
+#define ENETDOWN 127 /* Network is down */
+#define ENETUNREACH 128 /* Network is unreachable */
+#define ENETRESET 129 /* Network dropped connection because of reset */
+#define ECONNABORTED 130 /* Software caused connection abort */
+#define ECONNRESET 131 /* Connection reset by peer */
+#define ENOBUFS 132 /* No buffer space available */
+#define EISCONN 133 /* Transport endpoint is already connected */
+#define ENOTCONN 134 /* Transport endpoint is not connected */
+#define EUCLEAN 135 /* Structure needs cleaning */
+#define ENOTNAM 137 /* Not a XENIX named type file */
+#define ENAVAIL 138 /* No XENIX semaphores available */
+#define EISNAM 139 /* Is a named type file */
+#define EREMOTEIO 140 /* Remote I/O error */
+#define EINIT 141 /* Reserved */
+#define EREMDEV 142 /* Error 142 */
+#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 144 /* Too many references: cannot splice */
+#define ETIMEDOUT 145 /* Connection timed out */
+#define ECONNREFUSED 146 /* Connection refused */
+#define EHOSTDOWN 147 /* Host is down */
+#define EHOSTUNREACH 148 /* No route to host */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EALREADY 149 /* Operation already in progress */
+#define EINPROGRESS 150 /* Operation now in progress */
+#define ESTALE 151 /* Stale NFS file handle */
+#define ECANCELED 158 /* AIO operation canceled */
+
+#endif /* _ASM_MIPS_ERRNO_H */
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 61a0dac..be7e5c6 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -7,8 +7,8 @@
* Copyright (C) 2000 Silicon Graphics, Inc.
* Modified for further R[236]000 support by Paul M. Antoine, 1996.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
*/
#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H
@@ -29,6 +29,15 @@
#endif
/*
+ * Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ULCAST_
+#else
+#define _ULCAST_ (unsigned long)
+#endif
+
+/*
* Coprocessor 0 register names
*/
#define CP0_INDEX $0
@@ -55,12 +64,15 @@
#define CP0_XCONTEXT $20
#define CP0_FRAMEMASK $21
#define CP0_DIAGNOSTIC $22
+#define CP0_DEBUG $23
+#define CP0_DEPC $24
#define CP0_PERFORMANCE $25
#define CP0_ECC $26
#define CP0_CACHEERR $27
#define CP0_TAGLO $28
#define CP0_TAGHI $29
#define CP0_ERROREPC $30
+#define CP0_DESAVE $31
/*
* R4640/R4650 cp0 register names. These registers are listed
@@ -82,11 +94,27 @@
#define CP0_S1_DERRADDR0 $26
#define CP0_S1_DERRADDR1 $27
#define CP0_S1_INTCONTROL $20
+
+/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL $12 /* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP $12 /* MIPSR2 */
+
+/*
+ * TX39 Series
+ */
+#define CP0_TX39_CACHE $7
+
/*
* Coprocessor 1 (FPU) register names
*/
-#define CP1_REVISION $0
-#define CP1_STATUS $31
+#define CP1_REVISION $0
+#define CP1_STATUS $31
/*
* FPU Status Register Values
@@ -95,230 +123,113 @@
* Status Register Values
*/
-#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
-#define FPU_CSR_COND 0x00800000 /* $fcc0 */
-#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
-#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
-#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
-#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
-#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
-#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
-#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
-#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
+#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
+#define FPU_CSR_COND 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
+#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
+#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
+#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
+#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
+#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
+#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
/*
* X the exception cause indicator
* E the exception enable
* S the sticky/flag bit
-*/
-#define FPU_CSR_ALL_X 0x0003f000
-#define FPU_CSR_UNI_X 0x00020000
-#define FPU_CSR_INV_X 0x00010000
-#define FPU_CSR_DIV_X 0x00008000
-#define FPU_CSR_OVF_X 0x00004000
-#define FPU_CSR_UDF_X 0x00002000
-#define FPU_CSR_INE_X 0x00001000
+ */
+#define FPU_CSR_ALL_X 0x0003f000
+#define FPU_CSR_UNI_X 0x00020000
+#define FPU_CSR_INV_X 0x00010000
+#define FPU_CSR_DIV_X 0x00008000
+#define FPU_CSR_OVF_X 0x00004000
+#define FPU_CSR_UDF_X 0x00002000
+#define FPU_CSR_INE_X 0x00001000
-#define FPU_CSR_ALL_E 0x00000f80
-#define FPU_CSR_INV_E 0x00000800
-#define FPU_CSR_DIV_E 0x00000400
-#define FPU_CSR_OVF_E 0x00000200
-#define FPU_CSR_UDF_E 0x00000100
-#define FPU_CSR_INE_E 0x00000080
+#define FPU_CSR_ALL_E 0x00000f80
+#define FPU_CSR_INV_E 0x00000800
+#define FPU_CSR_DIV_E 0x00000400
+#define FPU_CSR_OVF_E 0x00000200
+#define FPU_CSR_UDF_E 0x00000100
+#define FPU_CSR_INE_E 0x00000080
-#define FPU_CSR_ALL_S 0x0000007c
-#define FPU_CSR_INV_S 0x00000040
-#define FPU_CSR_DIV_S 0x00000020
-#define FPU_CSR_OVF_S 0x00000010
-#define FPU_CSR_UDF_S 0x00000008
-#define FPU_CSR_INE_S 0x00000004
+#define FPU_CSR_ALL_S 0x0000007c
+#define FPU_CSR_INV_S 0x00000040
+#define FPU_CSR_DIV_S 0x00000020
+#define FPU_CSR_OVF_S 0x00000010
+#define FPU_CSR_UDF_S 0x00000008
+#define FPU_CSR_INE_S 0x00000004
/* rounding mode */
-#define FPU_CSR_RN 0x0 /* nearest */
-#define FPU_CSR_RZ 0x1 /* towards zero */
-#define FPU_CSR_RU 0x2 /* towards +Infinity */
-#define FPU_CSR_RD 0x3 /* towards -Infinity */
-
+#define FPU_CSR_RN 0x0 /* nearest */
+#define FPU_CSR_RZ 0x1 /* towards zero */
+#define FPU_CSR_RU 0x2 /* towards +Infinity */
+#define FPU_CSR_RD 0x3 /* towards -Infinity */
/*
* Values for PageMask register
*/
-#include <linux/config.h>
#ifdef CONFIG_CPU_VR41XX
-#define PM_1K 0x00000000
-#define PM_4K 0x00001800
-#define PM_16K 0x00007800
-#define PM_64K 0x0001f800
-#define PM_256K 0x0007f800
-#else
-#define PM_4K 0x00000000
-#define PM_16K 0x00006000
-#define PM_64K 0x0001e000
-#define PM_256K 0x0007e000
-#define PM_1M 0x001fe000
-#define PM_4M 0x007fe000
-#define PM_16M 0x01ffe000
-#endif
-
-/*
- * Values used for computation of new tlb entries
- */
-#define PL_4K 12
-#define PL_16K 14
-#define PL_64K 16
-#define PL_256K 18
-#define PL_1M 20
-#define PL_4M 22
-#define PL_16M 24
-
-/*
- * Macros to access the system control coprocessor
- */
-#define read_32bit_cp0_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tpush\n\t" \
- ".set\treorder\n\t" \
- "mfc0\t%0,"STR(source)"\n\t" \
- ".set\tpop" \
- : "=r" (__res)); \
- __res;})
-#define read_32bit_cp0_set1_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tpush\n\t" \
- ".set\treorder\n\t" \
- "cfc0\t%0,"STR(source)"\n\t" \
- ".set\tpop" \
- : "=r" (__res)); \
- __res;})
+/* Why doesn't stupidity hurt ... */
-/*
- * For now use this only with interrupts disabled!
- */
-#define read_64bit_cp0_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tmips3\n\t" \
- "dmfc0\t%0,"STR(source)"\n\t" \
- ".set\tmips0" \
- : "=r" (__res)); \
- __res;})
+#define PM_1K 0x00000000
+#define PM_4K 0x00001800
+#define PM_16K 0x00007800
+#define PM_64K 0x0001f800
+#define PM_256K 0x0007f800
-#define write_32bit_cp0_register(register,value) \
- __asm__ __volatile__( \
- "mtc0\t%0,"STR(register)"\n\t" \
- "nop" \
- : : "r" (value));
+#else
-#define write_32bit_cp0_set1_register(register,value) \
- __asm__ __volatile__( \
- "ctc0\t%0,"STR(register)"\n\t" \
- "nop" \
- : : "r" (value));
+#define PM_4K 0x00000000
+#define PM_16K 0x00006000
+#define PM_64K 0x0001e000
+#define PM_256K 0x0007e000
+#define PM_1M 0x001fe000
+#define PM_4M 0x007fe000
+#define PM_16M 0x01ffe000
+#define PM_64M 0x07ffe000
+#define PM_256M 0x1fffe000
-#define write_64bit_cp0_register(register,value) \
- __asm__ __volatile__( \
- ".set\tmips3\n\t" \
- "dmtc0\t%0,"STR(register)"\n\t" \
- ".set\tmips0" \
- : : "r" (value))
+#endif
/*
- * This should be changed when we get a compiler that support the MIPS32 ISA.
+ * Values used for computation of new tlb entries
*/
-#define read_mips32_cp0_config1() \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tnoreorder\n\t" \
- ".set\tnoat\n\t" \
- ".word\t0x40018001\n\t" \
- "move\t%0,$1\n\t" \
- ".set\tat\n\t" \
- ".set\treorder" \
- :"=r" (__res)); \
- __res;})
-
-#define tlb_write_indexed() \
- __asm__ __volatile__( \
- ".set noreorder\n\t" \
- "tlbwi\n\t" \
-".set reorder")
+#define PL_4K 12
+#define PL_16K 14
+#define PL_64K 16
+#define PL_256K 18
+#define PL_1M 20
+#define PL_4M 22
+#define PL_16M 24
+#define PL_64M 26
+#define PL_256M 28
/*
* R4x00 interrupt enable / cause bits
*/
-#define IE_SW0 (1<< 8)
-#define IE_SW1 (1<< 9)
-#define IE_IRQ0 (1<<10)
-#define IE_IRQ1 (1<<11)
-#define IE_IRQ2 (1<<12)
-#define IE_IRQ3 (1<<13)
-#define IE_IRQ4 (1<<14)
-#define IE_IRQ5 (1<<15)
+#define IE_SW0 (_ULCAST_(1) << 8)
+#define IE_SW1 (_ULCAST_(1) << 9)
+#define IE_IRQ0 (_ULCAST_(1) << 10)
+#define IE_IRQ1 (_ULCAST_(1) << 11)
+#define IE_IRQ2 (_ULCAST_(1) << 12)
+#define IE_IRQ3 (_ULCAST_(1) << 13)
+#define IE_IRQ4 (_ULCAST_(1) << 14)
+#define IE_IRQ5 (_ULCAST_(1) << 15)
/*
* R4x00 interrupt cause bits
*/
-#define C_SW0 (1<< 8)
-#define C_SW1 (1<< 9)
-#define C_IRQ0 (1<<10)
-#define C_IRQ1 (1<<11)
-#define C_IRQ2 (1<<12)
-#define C_IRQ3 (1<<13)
-#define C_IRQ4 (1<<14)
-#define C_IRQ5 (1<<15)
-
-#ifndef _LANGUAGE_ASSEMBLY
-/*
- * Manipulate the status register.
- * Mostly used to access the interrupt bits.
- */
-#define __BUILD_SET_CP0(name,register) \
-extern __inline__ unsigned int \
-set_cp0_##name(unsigned int set) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res |= set; \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-} \
- \
-extern __inline__ unsigned int \
-clear_cp0_##name(unsigned int clear) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res &= ~clear; \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-} \
- \
-extern __inline__ unsigned int \
-change_cp0_##name(unsigned int change, unsigned int new) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res &= ~change; \
- res |= (new & change); \
- if(change) \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-}
-
-__BUILD_SET_CP0(status,CP0_STATUS)
-__BUILD_SET_CP0(cause,CP0_CAUSE)
-__BUILD_SET_CP0(config,CP0_CONFIG)
-
-#endif /* defined (_LANGUAGE_ASSEMBLY) */
+#define C_SW0 (_ULCAST_(1) << 8)
+#define C_SW1 (_ULCAST_(1) << 9)
+#define C_IRQ0 (_ULCAST_(1) << 10)
+#define C_IRQ1 (_ULCAST_(1) << 11)
+#define C_IRQ2 (_ULCAST_(1) << 12)
+#define C_IRQ3 (_ULCAST_(1) << 13)
+#define C_IRQ4 (_ULCAST_(1) << 14)
+#define C_IRQ5 (_ULCAST_(1) << 15)
/*
* Bitfields in the R4xx0 cp0 status register
@@ -337,9 +248,16 @@
#define ST0_CE 0x00020000
/*
+ * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
+ * cacheops in userspace. This bit exists only on RM7000 and RM9000
+ * processors.
+ */
+#define ST0_CO 0x08000000
+
+/*
* Bitfields in the R[23]000 cp0 status register.
*/
-#define ST0_IEC 0x00000001
+#define ST0_IEC 0x00000001
#define ST0_KUC 0x00000002
#define ST0_IEP 0x00000004
#define ST0_KUP 0x00000008
@@ -353,9 +271,14 @@
/*
* Bits specific to the R4640/R4650
*/
+#define ST0_UM (_ULCAST_(1) << 4)
+#define ST0_IL (_ULCAST_(1) << 23)
+#define ST0_DL (_ULCAST_(1) << 24)
+
+/*
+ * Enable the MIPS MDMX and DSP ASEs
+ */
-#define ST0_UM (1 << 4)
-#define ST0_IL (1 << 23)
-#define ST0_DL (1 << 24)
+#define ST0_MX 0x01000000
/*
* Bitfields in the TX39 family CP0 Configuration Register 3
@@ -395,39 +318,40 @@
*/
#define ST0_IM 0x0000ff00
#define STATUSB_IP0 8
-#define STATUSF_IP0 (1 << 8)
+#define STATUSF_IP0 (_ULCAST_(1) << 8)
#define STATUSB_IP1 9
-#define STATUSF_IP1 (1 << 9)
+#define STATUSF_IP1 (_ULCAST_(1) << 9)
#define STATUSB_IP2 10
-#define STATUSF_IP2 (1 << 10)
+#define STATUSF_IP2 (_ULCAST_(1) << 10)
#define STATUSB_IP3 11
-#define STATUSF_IP3 (1 << 11)
+#define STATUSF_IP3 (_ULCAST_(1) << 11)
#define STATUSB_IP4 12
-#define STATUSF_IP4 (1 << 12)
+#define STATUSF_IP4 (_ULCAST_(1) << 12)
#define STATUSB_IP5 13
-#define STATUSF_IP5 (1 << 13)
+#define STATUSF_IP5 (_ULCAST_(1) << 13)
#define STATUSB_IP6 14
-#define STATUSF_IP6 (1 << 14)
+#define STATUSF_IP6 (_ULCAST_(1) << 14)
#define STATUSB_IP7 15
-#define STATUSF_IP7 (1 << 15)
+#define STATUSF_IP7 (_ULCAST_(1) << 15)
#define STATUSB_IP8 0
-#define STATUSF_IP8 (1 << 0)
+#define STATUSF_IP8 (_ULCAST_(1) << 0)
#define STATUSB_IP9 1
-#define STATUSF_IP9 (1 << 1)
+#define STATUSF_IP9 (_ULCAST_(1) << 1)
#define STATUSB_IP10 2
-#define STATUSF_IP10 (1 << 2)
+#define STATUSF_IP10 (_ULCAST_(1) << 2)
#define STATUSB_IP11 3
-#define STATUSF_IP11 (1 << 3)
+#define STATUSF_IP11 (_ULCAST_(1) << 3)
#define STATUSB_IP12 4
-#define STATUSF_IP12 (1 << 4)
+#define STATUSF_IP12 (_ULCAST_(1) << 4)
#define STATUSB_IP13 5
-#define STATUSF_IP13 (1 << 5)
+#define STATUSF_IP13 (_ULCAST_(1) << 5)
#define STATUSB_IP14 6
-#define STATUSF_IP14 (1 << 6)
+#define STATUSF_IP14 (_ULCAST_(1) << 6)
#define STATUSB_IP15 7
-#define STATUSF_IP15 (1 << 7)
+#define STATUSF_IP15 (_ULCAST_(1) << 7)
#define ST0_CH 0x00040000
#define ST0_SR 0x00100000
+#define ST0_TS 0x00200000
#define ST0_BEV 0x00400000
#define ST0_RE 0x02000000
#define ST0_FR 0x04000000
@@ -444,35 +368,36 @@
* Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
*/
#define CAUSEB_EXCCODE 2
-#define CAUSEF_EXCCODE (31 << 2)
+#define CAUSEF_EXCCODE (_ULCAST_(31) << 2)
#define CAUSEB_IP 8
-#define CAUSEF_IP (255 << 8)
+#define CAUSEF_IP (_ULCAST_(255) << 8)
#define CAUSEB_IP0 8
-#define CAUSEF_IP0 (1 << 8)
+#define CAUSEF_IP0 (_ULCAST_(1) << 8)
#define CAUSEB_IP1 9
-#define CAUSEF_IP1 (1 << 9)
+#define CAUSEF_IP1 (_ULCAST_(1) << 9)
#define CAUSEB_IP2 10
-#define CAUSEF_IP2 (1 << 10)
+#define CAUSEF_IP2 (_ULCAST_(1) << 10)
#define CAUSEB_IP3 11
-#define CAUSEF_IP3 (1 << 11)
+#define CAUSEF_IP3 (_ULCAST_(1) << 11)
#define CAUSEB_IP4 12
-#define CAUSEF_IP4 (1 << 12)
+#define CAUSEF_IP4 (_ULCAST_(1) << 12)
#define CAUSEB_IP5 13
-#define CAUSEF_IP5 (1 << 13)
+#define CAUSEF_IP5 (_ULCAST_(1) << 13)
#define CAUSEB_IP6 14
-#define CAUSEF_IP6 (1 << 14)
+#define CAUSEF_IP6 (_ULCAST_(1) << 14)
#define CAUSEB_IP7 15
-#define CAUSEF_IP7 (1 << 15)
+#define CAUSEF_IP7 (_ULCAST_(1) << 15)
#define CAUSEB_IV 23
-#define CAUSEF_IV (1 << 23)
+#define CAUSEF_IV (_ULCAST_(1) << 23)
#define CAUSEB_CE 28
-#define CAUSEF_CE (3 << 28)
+#define CAUSEF_CE (_ULCAST_(3) << 28)
#define CAUSEB_BD 31
-#define CAUSEF_BD (1 << 31)
+#define CAUSEF_BD (_ULCAST_(1) << 31)
/*
- * Bits in the coprozessor 0 config register.
+ * Bits in the coprocessor 0 config register.
*/
+/* Generic bits. */
#define CONF_CM_CACHABLE_NO_WA 0
#define CONF_CM_CACHABLE_WA 1
#define CONF_CM_UNCACHED 2
@@ -482,66 +407,958 @@
#define CONF_CM_CACHABLE_CUW 6
#define CONF_CM_CACHABLE_ACCELERATED 7
#define CONF_CM_CMASK 7
-#define CONF_DB (1 << 4)
-#define CONF_IB (1 << 5)
-#define CONF_SC (1 << 17)
-#define CONF_AC (1 << 23)
-#define CONF_HALT (1 << 25)
+#define CONF_BE (_ULCAST_(1) << 15)
+
+/* Bits common to various processors. */
+#define CONF_CU (_ULCAST_(1) << 3)
+#define CONF_DB (_ULCAST_(1) << 4)
+#define CONF_IB (_ULCAST_(1) << 5)
+#define CONF_DC (_ULCAST_(7) << 6)
+#define CONF_IC (_ULCAST_(7) << 9)
+#define CONF_EB (_ULCAST_(1) << 13)
+#define CONF_EM (_ULCAST_(1) << 14)
+#define CONF_SM (_ULCAST_(1) << 16)
+#define CONF_SC (_ULCAST_(1) << 17)
+#define CONF_EW (_ULCAST_(3) << 18)
+#define CONF_EP (_ULCAST_(15)<< 24)
+#define CONF_EC (_ULCAST_(7) << 28)
+#define CONF_CM (_ULCAST_(1) << 31)
+
+/* Bits specific to the R4xx0. */
+#define R4K_CONF_SW (_ULCAST_(1) << 20)
+#define R4K_CONF_SS (_ULCAST_(1) << 21)
+#define R4K_CONF_SB (_ULCAST_(3) << 22)
+
+/* Bits specific to the R5000. */
+#define R5K_CONF_SE (_ULCAST_(1) << 12)
+#define R5K_CONF_SS (_ULCAST_(3) << 20)
+
+/* Bits specific to the RM7000. */
+#define RM7K_CONF_SE (_ULCAST_(1) << 3)
+#define RM7K_CONF_TE (_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
+#define RM7K_CONF_TC (_ULCAST_(1) << 17)
+#define RM7K_CONF_SI (_ULCAST_(3) << 20)
+#define RM7K_CONF_SC (_ULCAST_(1) << 31)
+
+/* Bits specific to the R10000. */
+#define R10K_CONF_DN (_ULCAST_(3) << 3)
+#define R10K_CONF_CT (_ULCAST_(1) << 5)
+#define R10K_CONF_PE (_ULCAST_(1) << 6)
+#define R10K_CONF_PM (_ULCAST_(3) << 7)
+#define R10K_CONF_EC (_ULCAST_(15)<< 9)
+#define R10K_CONF_SB (_ULCAST_(1) << 13)
+#define R10K_CONF_SK (_ULCAST_(1) << 14)
+#define R10K_CONF_SS (_ULCAST_(7) << 16)
+#define R10K_CONF_SC (_ULCAST_(7) << 19)
+#define R10K_CONF_DC (_ULCAST_(7) << 26)
+#define R10K_CONF_IC (_ULCAST_(7) << 29)
+
+/* Bits specific to the VR41xx. */
+#define VR41_CONF_CS (_ULCAST_(1) << 12)
+#define VR41_CONF_P4K (_ULCAST_(1) << 13)
+#define VR41_CONF_BP (_ULCAST_(1) << 16)
+#define VR41_CONF_M16 (_ULCAST_(1) << 20)
+#define VR41_CONF_AD (_ULCAST_(1) << 23)
+
+/* Bits specific to the R30xx. */
+#define R30XX_CONF_FDM (_ULCAST_(1) << 19)
+#define R30XX_CONF_REV (_ULCAST_(1) << 22)
+#define R30XX_CONF_AC (_ULCAST_(1) << 23)
+#define R30XX_CONF_RF (_ULCAST_(1) << 24)
+#define R30XX_CONF_HALT (_ULCAST_(1) << 25)
+#define R30XX_CONF_FPINT (_ULCAST_(7) << 26)
+#define R30XX_CONF_DBR (_ULCAST_(1) << 29)
+#define R30XX_CONF_SB (_ULCAST_(1) << 30)
+#define R30XX_CONF_LOCK (_ULCAST_(1) << 31)
+
+/* Bits specific to the TX49. */
+#define TX49_CONF_DC (_ULCAST_(1) << 16)
+#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */
+#define TX49_CONF_HALT (_ULCAST_(1) << 18)
+#define TX49_CONF_CWFON (_ULCAST_(1) << 27)
+
+/* Bits specific to the MIPS32/64 PRA. */
+#define MIPS_CONF_MT (_ULCAST_(7) << 7)
+#define MIPS_CONF_AR (_ULCAST_(7) << 10)
+#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_M (_ULCAST_(1) << 31)
/*
- * R10000 performance counter definitions.
- *
- * FIXME: The R10000 performance counter opens a nice way to implement CPU
- * time accounting with a precission of one cycle. I don't have
- * R10000 silicon but just a manual, so ...
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP (_ULCAST_(1) << 0)
+#define MIPS_CONF1_EP (_ULCAST_(1) << 1)
+#define MIPS_CONF1_CA (_ULCAST_(1) << 2)
+#define MIPS_CONF1_WR (_ULCAST_(1) << 3)
+#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
+#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
+#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
+#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
+#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
+#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
+#define MIPS_CONF2_SS (_ULCAST_(15)<< 8)
+#define MIPS_CONF2_SU (_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA (_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL (_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS (_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU (_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
+#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
+#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
+#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
+#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
+#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
+#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
+#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
+#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
+
+#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
+
+#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S (_ULCAST_(1) << 16)
+#define MIPS_FPIR_D (_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS (_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D (_ULCAST_(1) << 19)
+#define MIPS_FPIR_W (_ULCAST_(1) << 20)
+#define MIPS_FPIR_L (_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Functions to access the R10000 performance counters. These are basically
+ * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
+ * performance counter number encoded into bits 1 ... 5 of the instruction.
+ * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
+ * disassembler these will look like an access to sel 0 or 1.
+ */
+#define read_r10k_perf_cntr(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfpc\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntr(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtpc\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+#define read_r10k_perf_event(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfps\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntl(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtps\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define __read_32bit_c0_register(source, sel) \
+({ int __res; \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __read_64bit_c0_register(source, sel) \
+({ unsigned long long __res; \
+ if (sizeof(unsigned long) == 4) \
+ __res = __read_64bit_c0_split(source, sel); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmfc0\t%0, " #source "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_register(register, sel, value) \
+do { \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mtc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+#define __write_64bit_c0_register(register, sel, value) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_64bit_c0_split(register, sel, value); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmtc0\t%z0, " #register "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+} while (0)
+
+#define __read_ulong_c0_register(reg, sel) \
+ ((sizeof(unsigned long) == 4) ? \
+ (unsigned long) __read_32bit_c0_register(reg, sel) : \
+ (unsigned long) __read_64bit_c0_register(reg, sel))
+
+#define __write_ulong_c0_register(reg, sel, val) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_32bit_c0_register(reg, sel, val); \
+ else \
+ __write_64bit_c0_register(reg, sel, val); \
+} while (0)
+
+/*
+ * On RM7000/RM9000 these are uses to access cop0 set 1 registers
+ */
+#define __read_32bit_c0_ctrl_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ "cfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_ctrl_register(register, value) \
+do { \
+ __asm__ __volatile__( \
+ "ctc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+/*
+ * These versions are only needed for systems with more than 38 bits of
+ * physical address space running the 32-bit kernel. That's none atm :-)
+ */
+#define __read_64bit_c0_split(source, sel) \
+({ \
+ unsigned long long __val; \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source ", " #sel "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ local_irq_restore(__flags); \
+ \
+ __val; \
+})
+
+#define __write_64bit_c0_split(source, sel, val) \
+do { \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ local_irq_restore(__flags); \
+} while (0)
+
+#define read_c0_index() __read_32bit_c0_register($0, 0)
+#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+
+#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
+#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
+
+#define read_c0_entrylo1() __read_ulong_c0_register($3, 0)
+#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val)
+
+#define read_c0_conf() __read_32bit_c0_register($3, 0)
+#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val)
+
+#define read_c0_context() __read_ulong_c0_register($4, 0)
+#define write_c0_context(val) __write_ulong_c0_register($4, 0, val)
+
+#define read_c0_userlocal() __read_ulong_c0_register($4, 2)
+#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val)
+
+#define read_c0_pagemask() __read_32bit_c0_register($5, 0)
+#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val)
+
+#define read_c0_wired() __read_32bit_c0_register($6, 0)
+#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val)
+
+#define read_c0_info() __read_32bit_c0_register($7, 0)
+
+#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */
+#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_badvaddr() __read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val)
+
+#define read_c0_count() __read_32bit_c0_register($9, 0)
+#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
+
+#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
+
+#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
+#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
+
+#define read_c0_compare() __read_32bit_c0_register($11, 0)
+#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val)
+
+#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
+
+#define read_c0_status() __read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val) \
+do { \
+ __write_32bit_c0_register($12, 0, val); \
+ __ehb(); \
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
+#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#define read_c0_cause() __read_32bit_c0_register($13, 0)
+#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val)
+
+#define read_c0_epc() __read_ulong_c0_register($14, 0)
+#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val)
+
+#define read_c0_prid() __read_32bit_c0_register($15, 0)
+
+#define read_c0_config() __read_32bit_c0_register($16, 0)
+#define read_c0_config1() __read_32bit_c0_register($16, 1)
+#define read_c0_config2() __read_32bit_c0_register($16, 2)
+#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
+#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
+#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
+#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
+#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
+
+/*
+ * The WatchLo register. There may be upto 8 of them.
*/
+#define read_c0_watchlo0() __read_ulong_c0_register($18, 0)
+#define read_c0_watchlo1() __read_ulong_c0_register($18, 1)
+#define read_c0_watchlo2() __read_ulong_c0_register($18, 2)
+#define read_c0_watchlo3() __read_ulong_c0_register($18, 3)
+#define read_c0_watchlo4() __read_ulong_c0_register($18, 4)
+#define read_c0_watchlo5() __read_ulong_c0_register($18, 5)
+#define read_c0_watchlo6() __read_ulong_c0_register($18, 6)
+#define read_c0_watchlo7() __read_ulong_c0_register($18, 7)
+#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val)
+#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val)
+#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val)
+#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val)
+#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val)
+#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val)
+#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val)
+#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val)
+
+/*
+ * The WatchHi register. There may be upto 8 of them.
+ */
+#define read_c0_watchhi0() __read_32bit_c0_register($19, 0)
+#define read_c0_watchhi1() __read_32bit_c0_register($19, 1)
+#define read_c0_watchhi2() __read_32bit_c0_register($19, 2)
+#define read_c0_watchhi3() __read_32bit_c0_register($19, 3)
+#define read_c0_watchhi4() __read_32bit_c0_register($19, 4)
+#define read_c0_watchhi5() __read_32bit_c0_register($19, 5)
+#define read_c0_watchhi6() __read_32bit_c0_register($19, 6)
+#define read_c0_watchhi7() __read_32bit_c0_register($19, 7)
+
+#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val)
+#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val)
+#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val)
+#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val)
+#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val)
+#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val)
+#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val)
+#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val)
+
+#define read_c0_xcontext() __read_ulong_c0_register($20, 0)
+#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val)
+
+#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20)
+#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
+
+#define read_c0_framemask() __read_32bit_c0_register($21, 0)
+#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val)
+
+/* RM9000 PerfControl performance counter control register */
+#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0)
+#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag() __read_32bit_c0_register($22, 0)
+#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag1() __read_32bit_c0_register($22, 1)
+#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val)
+
+#define read_c0_diag2() __read_32bit_c0_register($22, 2)
+#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val)
+
+#define read_c0_diag3() __read_32bit_c0_register($22, 3)
+#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val)
+
+#define read_c0_diag4() __read_32bit_c0_register($22, 4)
+#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val)
+
+#define read_c0_diag5() __read_32bit_c0_register($22, 5)
+#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val)
+
+#define read_c0_debug() __read_32bit_c0_register($23, 0)
+#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val)
+
+#define read_c0_depc() __read_ulong_c0_register($24, 0)
+#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val)
+
+/*
+ * MIPS32 / MIPS64 performance counters
+ */
+#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0)
+#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
+#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1)
+#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
+#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2)
+#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
+#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3)
+#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
+#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4)
+#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
+#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5)
+#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
+#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6)
+#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
+#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7)
+#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
+
+/* RM9000 PerfCount performance counter register */
+#define read_c0_perfcount() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val)
+
+#define read_c0_ecc() __read_32bit_c0_register($26, 0)
+#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val)
+
+#define read_c0_derraddr0() __read_ulong_c0_register($26, 1)
+#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val)
+
+#define read_c0_cacheerr() __read_32bit_c0_register($27, 0)
+
+#define read_c0_derraddr1() __read_ulong_c0_register($27, 1)
+#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val)
+
+#define read_c0_taglo() __read_32bit_c0_register($28, 0)
+#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val)
+
+#define read_c0_dtaglo() __read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val)
+
+#define read_c0_taghi() __read_32bit_c0_register($29, 0)
+#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val)
+
+#define read_c0_errorepc() __read_ulong_c0_register($30, 0)
+#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val)
+
+/* MIPSR2 */
+#define read_c0_hwrena() __read_32bit_c0_register($7, 0)
+#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl() __read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl() __read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap() __read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase() __read_32bit_c0_register($15, 1)
+#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
/*
- * Events counted by counter #0
+ * Macros to access the floating point coprocessor control registers
*/
-#define CE0_CYCLES 0
-#define CE0_INSN_ISSUED 1
-#define CE0_LPSC_ISSUED 2
-#define CE0_S_ISSUED 3
-#define CE0_SC_ISSUED 4
-#define CE0_SC_FAILED 5
-#define CE0_BRANCH_DECODED 6
-#define CE0_QW_WB_SECONDARY 7
-#define CE0_CORRECTED_ECC_ERRORS 8
-#define CE0_ICACHE_MISSES 9
-#define CE0_SCACHE_I_MISSES 10
-#define CE0_SCACHE_I_WAY_MISSPREDICTED 11
-#define CE0_EXT_INTERVENTIONS_REQ 12
-#define CE0_EXT_INVALIDATE_REQ 13
-#define CE0_VIRTUAL_COHERENCY_COND 14
-#define CE0_INSN_GRADUATED 15
+#define read_32bit_cp1_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tpush\n\t" \
+ ".set\treorder\n\t" \
+ "cfc1\t%0,"STR(source)"\n\t" \
+ ".set\tpop" \
+ : "=r" (__res)); \
+ __res;})
+
+#define rddsp(mask) \
+({ \
+ unsigned int __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # rddsp $1, %x1 \n" \
+ " .word 0x7c000cb8 | (%x1 << 16) \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res) \
+ : "i" (mask)); \
+ __res; \
+})
+
+#define wrdsp(val, mask) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # wrdsp $1, %x1 \n" \
+ " .word 0x7c2004f8 | (%x1 << 11) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (val), "i" (mask)); \
+} while (0)
+
+#define mfhi0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac0 \n" \
+ " .word 0x00000810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac1 \n" \
+ " .word 0x00200810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac2 \n" \
+ " .word 0x00400810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac3 \n" \
+ " .word 0x00600810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac0 \n" \
+ " .word 0x00000812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac1 \n" \
+ " .word 0x00200812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac2 \n" \
+ " .word 0x00400812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac3 \n" \
+ " .word 0x00600812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mthi0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac0 \n" \
+ " .word 0x00200011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac1 \n" \
+ " .word 0x00200811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac2 \n" \
+ " .word 0x00201011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac3 \n" \
+ " .word 0x00201811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac0 \n" \
+ " .word 0x00200013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac1 \n" \
+ " .word 0x00200813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac2 \n" \
+ " .word 0x00201013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac3 \n" \
+ " .word 0x00201813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
/*
- * Events counted by counter #1
+ * TLB operations.
+ *
+ * It is responsibility of the caller to take care of any TLB hazards.
*/
-#define CE1_CYCLES 0
-#define CE1_INSN_GRADUATED 1
-#define CE1_LPSC_GRADUATED 2
-#define CE1_S_GRADUATED 3
-#define CE1_SC_GRADUATED 4
-#define CE1_FP_INSN_GRADUATED 5
-#define CE1_QW_WB_PRIMARY 6
-#define CE1_TLB_REFILL 7
-#define CE1_BRANCH_MISSPREDICTED 8
-#define CE1_DCACHE_MISS 9
-#define CE1_SCACHE_D_MISSES 10
-#define CE1_SCACHE_D_WAY_MISSPREDICTED 11
-#define CE1_EXT_INTERVENTION_HITS 12
-#define CE1_EXT_INVALIDATE_REQ 13
-#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14
-#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15
+static inline void tlb_probe(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbp\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_read(void)
+{
+#if MIPS34K_MISSED_ITLB_WAR
+ int res = 0;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41610001 # dvpe $1 \n"
+ " move %0, $1 \n"
+ " ehb \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+#endif
+
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbr\n\t"
+ ".set reorder");
+
+#if MIPS34K_MISSED_ITLB_WAR
+ if ((res & _ULCAST_(1)))
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41600021 # evpe \n"
+ " ehb \n"
+ " .set pop \n");
+#endif
+}
+
+static inline void tlb_write_indexed(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwi\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_write_random(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwr\n\t"
+ ".set reorder");
+}
/*
- * These flags define in which priviledge mode the counters count events
+ * Manipulate bits in a c0 register.
*/
-#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */
-#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */
-#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */
-#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */
+#define __BUILD_SET_C0(name) \
+static inline unsigned int \
+set_c0_##name(unsigned int set) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res |= set; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+clear_c0_##name(unsigned int clear) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~clear; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+change_c0_##name(unsigned int change, unsigned int new) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~change; \
+ res |= (new & change); \
+ write_c0_##name(res); \
+ \
+ return res; \
+}
+
+__BUILD_SET_C0(status)
+__BUILD_SET_C0(cause)
+__BUILD_SET_C0(config)
+__BUILD_SET_C0(intcontrol)
+__BUILD_SET_C0(intctl)
+__BUILD_SET_C0(srsmap)
+
+#endif /* !__ASSEMBLY__ */
#endif /* _ASM_MIPSREGS_H */
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 5aad043..3fc9975 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -24,6 +24,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
@@ -112,8 +114,11 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
@@ -137,11 +142,9 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
-#define CFG_SDRAM_16BIT 1
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
@@ -150,27 +153,20 @@
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
#define CFG_MALLOC_LEN (256*1024)
-#define CFG_MALLOC_END \
- ({ \
- DECLARE_GLOBAL_DATA_PTR; \
- CFG_SDRAM_BASE + gd->sdram_size; \
- })
-#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN)
-
#define CFG_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 95aeab6..ba18eb6 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -24,6 +24,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
@@ -139,9 +141,9 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
-#define CONFIG_CMD_REGINFO
#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
#undef CONFIG_CMD_XIMG
@@ -170,10 +172,9 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
@@ -185,17 +186,17 @@
#define CFG_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
-#define CFG_MAXARGS 8
+#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index 194788b..a528ddf 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -24,6 +24,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7001 1
@@ -153,10 +155,9 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
@@ -167,17 +168,17 @@
#define CFG_MALLOC_LEN (256*1024)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index b81fc21..fc9585e 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -24,6 +24,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7002 1
@@ -153,11 +155,9 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
-#define CFG_SDRAM_16BIT 1
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
@@ -168,17 +168,17 @@
#define CFG_MALLOC_LEN (256*1024)
/* Allow 2MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00200000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
new file mode 100644
index 0000000..9fd49a5
--- /dev/null
+++ b/include/configs/atstk1006.h
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1002 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/memory-map.h>
+
+#define CONFIG_AVR32 1
+#define CONFIG_AT32AP 1
+#define CONFIG_AT32AP7000 1
+#define CONFIG_ATSTK1006 1
+#define CONFIG_ATSTK1000 1
+
+#define CONFIG_ATSTK1000_EXT_FLASH 1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ 1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL 1
+#define CFG_POWER_MANAGER 1
+#define CFG_OSC0_HZ 20000000
+#define CFG_PLL0_DIV 1
+#define CFG_PLL0_MUL 7
+#define CFG_PLL0_SUPPRESS_CYCLES 16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU 0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB 1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA 2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB 1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ * icp = PLLOPT<2>
+ * ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT 0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1 1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttyS0 root=mtd3 fbmem=2400k"
+
+#define CONFIG_BOOTCOMMAND \
+ "fsload; bootm $(fileaddr)"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_NET_MULTI 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_MACB 1
+#define CONFIG_PIO2 1
+#define CFG_NR_PIOS 5
+#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
+
+#define CFG_DCACHE_LINESZ 32
+#define CFG_ICACHE_LINESZ 32
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#endif
+
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x800000
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 135
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 65536
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN (256*1024)
+#define CFG_DMA_ALLOC_LEN (16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN (16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x3f00000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
new file mode 100644
index 0000000..622a5d4
--- /dev/null
+++ b/include/configs/quad100hd.h
@@ -0,0 +1,298 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * quad100hd.h - configuration for Quad100hd board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_QUAD100HD 1 /* Board is Quad100hd */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405EP 1 /* Specifc 405EP support*/
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+
+#define PLLMR0_DEFAULT PLLMR0_266_133_66 /* no PCI */
+#define PLLMR1_DEFAULT PLLMR1_266_133_66 /* no PCI */
+
+/* the environment is in the EEPROM by default */
+#define CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_IN_FLASH
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x01 /* PHY address */
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_LOG
+#undef CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#undef CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*-----------------------------------------------------------------------
+ * SDRAM
+ *----------------------------------------------------------------------*/
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1
+#define CFG_SDRAM_SIZE 0x02000000 /* 32 MB */
+
+/* FIX! SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*
+ * JFFS2
+ */
+#define CFG_JFFS2_FIRST_BANK 0
+#ifdef CFG_KERNEL_IN_JFFS2
+#define CFG_JFFS2_FIRST_SECTOR 0 /* JFFS starts at block 0 */
+#else /* kernel not in JFFS */
+#define CFG_JFFS2_FIRST_SECTOR 8 /* block 0-7 is kernel (1MB = 8 sectors) */
+#endif
+#define CFG_JFFS2_NUM_BANKS 1
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CFG_BASE_BAUD 691200
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_info (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* bytes of address */
+
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 8 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_SIZE 0x2000
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFC00000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (TEXT_BASE)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_INCREMENT 0 /* there is only one bank */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+/* the environment is located before u-boot */
+#define CFG_ENV_ADDR (TEXT_BASE - CFG_ENV_SECT_SIZE)
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
+#endif
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_SIZE 0x400 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x00000000
+#define CFG_ENABLE_CRC_16 1 /* Intrinsyc formatting used crc16 */
+#endif
+
+/* partly from PPCBoot */
+/* NAND */
+#define CONFIG_NAND
+#ifdef CONFIG_NAND
+#define CFG_NAND_BASE 0x60000000
+#define CFG_NAND_CS 10 /* our CS is GPIO10 */
+#define CFG_NAND_RDY 23 /* our RDY is GPIO23 */
+#define CFG_NAND_CE 24 /* our CE is GPIO24 */
+#define CFG_NAND_CLE 31 /* our CLE is GPIO31 */
+#define CFG_NAND_ALE 30 /* our ALE is GPIO30 */
+#define NAND_MAX_CHIPS 1
+#define CFG_MAX_NAND_DEVICE 1
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+/* see ./cpu/ppc4xx/start.S */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ * Taken from PPCBoot board/icecube/icecube.h
+ */
+
+/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
+#define CFG_EBC_PB0AP 0x04002480
+/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
+#define CFG_EBC_PB0CR 0xFFC5A000
+#define CFG_EBC_PB1AP 0x04005480
+#define CFG_EBC_PB1CR 0x60018000
+#define CFG_EBC_PB2AP 0x00000000
+#define CFG_EBC_PB2CR 0x00000000
+#define CFG_EBC_PB3AP 0x00000000
+#define CFG_EBC_PB3CR 0x00000000
+#define CFG_EBC_PB4AP 0x00000000
+#define CFG_EBC_PB4CR 0x00000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * Taken in part from PPCBoot board/icecube/icecube.h
+ */
+/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
+#define CFG_GPIO0_OSRH 0x55555550
+#define CFG_GPIO0_OSRL 0x00000110
+#define CFG_GPIO0_ISR1H 0x00000000
+#define CFG_GPIO0_ISR1L 0x15555445
+#define CFG_GPIO0_TSRH 0x00000000
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xFFFF8097
+#define CFG_GPIO0_ODR 0x00000000
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/* ENVIRONMENT VARS */
+
+#define CONFIG_IPADDR 192.168.1.67
+#define CONFIG_SERVERIP 192.168.1.50
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_LOADADDR 300000
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 5d37383..23ed87f 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -206,6 +206,16 @@
#define CONFIG_RTC_RX8025 /* Use Epson rx8025 rtc via i2c */
#define CFG_I2C_RTC_ADDR 0x32 /* at address 0x32 */
+/* I2C temp sensor */
+/* Socrates uses Maxim's DS75, which is compatible with LM75 */
+#define CONFIG_DTT_LM75 1
+#define CONFIG_DTT_SENSORS {4} /* Sensor addresses */
+#define CFG_DTT_MAX_TEMP 125
+#define CFG_DTT_LOW_TEMP -55
+#define CFG_DTT_HYSTERESIS 3
+#define CFG_EEPROM_PAGE_WRITE_ENABLE /* necessary for the LM75 chip */
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+
/* RapidIO MMU */
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
@@ -226,13 +236,12 @@
#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */
#if defined(CONFIG_PCI)
-
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_EEPRO100
#undef CONFIG_TULIP
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
#endif /* CONFIG_PCI */
@@ -293,14 +302,14 @@
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
-#undef CONFIG_CMD_DTT
+#define CONFIG_CMD_DTT
#undef CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
-#undef CONFIG_CMD_RTC
#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
#if defined(CONFIG_PCI)
@@ -360,9 +369,10 @@
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootfile=/tftpboot/socrates/uImage\0" \
+ "bootfile=$hostname/uImage\0" \
"netdev=eth0\0" \
"consdev=ttyS0\0" \
+ "hostname=socrates\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$serverip:$rootpath\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -379,7 +389,7 @@
"tftp ${fdt_addr_r} ${fdt_file}; " \
"run nfsargs addip addcons;" \
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "fdt_file=socrates/socrates.dtb\0" \
+ "fdt_file=$hostname/socrates.dtb\0" \
"fdt_addr_r=B00000\0" \
"fdt_addr=FC1E0000\0" \
"rootpath=/opt/eldk/ppc_85xx\0" \
@@ -387,7 +397,7 @@
"kernel_addr_r=200000\0" \
"ramdisk_addr=FC200000\0" \
"ramdisk_addr_r=400000\0" \
- "load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0" \
+ "load=tftp 100000 $hostname/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
@@ -399,4 +409,14 @@
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
+/* USB support */
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_PCI_OHCI 1
+#define CONFIG_PCI_OHCI_DEVNO 3 /* Number in PCI list */
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
+#define CFG_OHCI_SWAP_REG_ACCESS 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_USB_STORAGE 1
+
#endif /* __CONFIG_H */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 4cc4a7d..e2a25a6 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -385,6 +385,10 @@
extern struct nand_flash_dev nand_flash_ids[];
extern struct nand_manufacturers nand_manuf_ids[];
+#ifndef NAND_MAX_CHIPS
+#define NAND_MAX_CHIPS 8
+#endif
+
/**
* struct nand_bbt_descr - bad block table descriptor
* @options: options for this descriptor
diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h
index bd1831e..4449f98 100644
--- a/include/onenand_uboot.h
+++ b/include/onenand_uboot.h
@@ -14,6 +14,8 @@
#ifndef __UBOOT_ONENAND_H
#define __UBOOT_ONENAND_H
+#include <linux/types.h>
+
struct kvec {
void *iov_base;
size_t iov_len;
@@ -22,6 +24,9 @@
typedef int spinlock_t;
typedef int wait_queue_head_t;
+struct mtd_info;
+struct erase_info;
+
/* Functions */
extern void onenand_init(void);
extern int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
diff --git a/lib_arm/board.c b/lib_arm/board.c
index b2e6910..80b149b 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -45,6 +45,8 @@
#include <version.h>
#include <net.h>
#include <serial.h>
+#include <nand.h>
+#include <onenand_uboot.h>
#ifdef CONFIG_DRIVER_SMC91111
#include "../drivers/net/smc91111.h"
@@ -55,14 +57,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
-void onenand_init(void);
-#endif
-
ulong monitor_flash_len;
#ifdef CONFIG_HAS_DATAFLASH
diff --git a/lib_avr32/memset.S b/lib_avr32/memset.S
index dc3b09b..79e3c67 100644
--- a/lib_avr32/memset.S
+++ b/lib_avr32/memset.S
@@ -27,7 +27,7 @@
*
* Returns b in r12
*/
- .text
+ .section .text.memset, "ax", @progbits
.global memset
.type memset, @function
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 1645f2c..532550b 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -28,6 +28,8 @@
#include <version.h>
#include <net.h>
#include <environment.h>
+#include <nand.h>
+#include <spi.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -416,6 +418,17 @@
}
#endif
+#ifdef CONFIG_CMD_NAND
+ puts ("NAND: ");
+ nand_init (); /* go init the NAND */
+#endif
+
+#ifdef CONFIG_CMD_SPI
+ puts ("SPI: ");
+ spi_init (); /* go init the SPI */
+ puts ("ready\n");
+#endif
+
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 4956403..6f7242d 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -93,9 +93,7 @@
#if defined(CONFIG_HARD_SPI)
#include <spi.h>
#endif
-#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
-#endif
+#include <nand.h>
static char *failed = "*** failed ***\n";
diff --git a/lib_sh/board.c b/lib_sh/board.c
index 883c381..807415c 100644
--- a/lib_sh/board.c
+++ b/lib_sh/board.c
@@ -76,7 +76,7 @@
}
#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
+#include <nand.h>
static int sh_nand_init(void)
{
printf("NAND: ");