arch: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile
index ebae50f..5ae1a53 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/Makefile
+++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile
@@ -8,7 +8,7 @@
obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
obj-$(CONFIG_STM32MP15X) += stm32mp15x.o
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
obj-y += spl.o
obj-y += tzc400.o
else
diff --git a/arch/arm/mach-stm32mp/stm32mp1/cpu.c b/arch/arm/mach-stm32mp/stm32mp1/cpu.c
index 64480da..26c073f 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/cpu.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/cpu.c
@@ -57,7 +57,7 @@
bool use_lmb = false;
enum dcache_option option;
- if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+ if (IS_ENABLED(CONFIG_XPL_BUILD)) {
/* STM32_SYSRAM_BASE exist only when SPL is supported */
#ifdef CONFIG_SPL
start = ALIGN_DOWN(STM32_SYSRAM_BASE, MMU_SECTION_SIZE);
@@ -133,7 +133,7 @@
if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) &&
(boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
- else if (IS_ENABLED(CONFIG_DEBUG_UART) && IS_ENABLED(CONFIG_SPL_BUILD))
+ else if (IS_ENABLED(CONFIG_DEBUG_UART) && IS_ENABLED(CONFIG_XPL_BUILD))
debug_uart_init();
return 0;
@@ -339,7 +339,7 @@
return nt_fw_dtb;
}
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_stm32_t)(u32 romapi);
diff --git a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c
index f096fe5..b6a0ac1 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c
@@ -214,13 +214,13 @@
/* weak function: STM32MP15x mach init for boot without TFA */
void stm32mp_cpu_init(void)
{
- if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+ if (IS_ENABLED(CONFIG_XPL_BUILD)) {
security_init();
update_bootmode();
}
/* reset copro state in SPL, when used, or in U-Boot */
- if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) {
+ if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_XPL_BUILD)) {
/* Reset Coprocessor state unless it wakes up from Standby power mode */
if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);