diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
index d5f63f4..22671d4 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -12,13 +12,13 @@
 #include <asm/armv8/sec_firmware.h>
 
 struct icid_id_table {
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
 	const char *compat;
 	phys_addr_t compat_addr;
 #endif
 	phys_addr_t reg_addr;
 	u32 reg;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
 	u32 id;
 #endif
 	bool le;
@@ -35,7 +35,7 @@
 void set_icids(void);
 void fdt_fixup_icid(void *blob);
 
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
 #define SET_ICID_ENTRY(name, idA, regA, addr, compataddr, _le) \
 	{ .reg = regA, \
 	  .reg_addr = addr, \
diff --git a/arch/arm/include/asm/arch-imx8/boot0.h b/arch/arm/include/asm/arch-imx8/boot0.h
index 5ce781a..fc580b2 100644
--- a/arch/arm/include/asm/arch-imx8/boot0.h
+++ b/arch/arm/include/asm/arch-imx8/boot0.h
@@ -3,7 +3,7 @@
  * Copyright 2019 NXP
  */
 
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_XPL_BUILD)
 	/*
 	 * We use absolute address not PC relative address to jump.
 	 * When running SPL on iMX8, the A core starts at address 0, a alias to OCRAM 0x100000,
diff --git a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
index 4675dc3..b499d97 100644
--- a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
@@ -16,7 +16,7 @@
 void lpc32xx_i2c_init(unsigned int devnum);
 void lpc32xx_ssp_init(void);
 void lpc32xx_usb_init(void);
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_XPL_BUILD)
 void ddr_init(const struct emc_dram_settings *dram);
 #endif
 #endif /* _LPC32XX_SYS_PROTO_H */
diff --git a/arch/arm/include/asm/arch-mx6/litesom.h b/arch/arm/include/asm/arch-mx6/litesom.h
index 37a16d2..642ed22 100644
--- a/arch/arm/include/asm/arch-mx6/litesom.h
+++ b/arch/arm/include/asm/arch-mx6/litesom.h
@@ -8,7 +8,7 @@
 
 int litesom_mmc_init(struct bd_info *bis);
 
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
 void litesom_init_f(void);
 #endif
 
diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
index dbc97b2..ad9c1ac 100644
--- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_ARCH_MX6_DDR_H__
 #define __ASM_ARCH_MX6_DDR_H__
 
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
 #ifdef CONFIG_MX6Q
 #include "mx6q-ddr.h"
 #else
@@ -488,7 +488,7 @@
 		  const struct mx6_mmdc_calibration *,
 		  const void *);
 
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
 
 #define MX6_MMDC_P0_MDCTL	0x021b0000
 #define MX6_MMDC_P0_MDPDC	0x021b0004
diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h
index 17afd1b..f8a5649 100644
--- a/arch/arm/include/asm/arch-mxs/sys_proto.h
+++ b/arch/arm/include/asm/arch-mxs/sys_proto.h
@@ -14,7 +14,7 @@
 int mxsmmc_initialize(struct bd_info *bis, int id, int (*wp)(int),
 		      int (*cd)(int));
 
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
 
 #if defined(CONFIG_MX23)
 #include <asm/arch/iomux-mx23.h>
diff --git a/arch/arm/include/asm/arch-rk3066/boot0.h b/arch/arm/include/asm/arch-rk3066/boot0.h
index 6bf3828..eaf8155 100644
--- a/arch/arm/include/asm/arch-rk3066/boot0.h
+++ b/arch/arm/include/asm/arch-rk3066/boot0.h
@@ -10,7 +10,7 @@
  * (containing the magic 'RK30'). This magic constant will be written into
  * the final image by the rkimage tool, but we need to reserve space for it here.
  */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
 	b	1f  /* if overwritten, entry-address is at the next word */
 1:
 #endif
@@ -68,7 +68,7 @@
 	pop	{r1-r12, pc}
 #endif
 
-#if (defined(CONFIG_SPL_BUILD))
+#if (defined(CONFIG_XPL_BUILD))
 /* U-Boot proper of armv7 does not need this */
 	b reset
 #endif
diff --git a/arch/arm/include/asm/arch-rockchip/boot0.h b/arch/arm/include/asm/arch-rockchip/boot0.h
index 0c375e5..edb2a31 100644
--- a/arch/arm/include/asm/arch-rockchip/boot0.h
+++ b/arch/arm/include/asm/arch-rockchip/boot0.h
@@ -12,7 +12,7 @@
  * To make life easier for everyone, we build the SPL binary with
  * space for this 4-byte header already included in the binary.
  */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
 	/*
 	 * We need to add 4 bytes of space for the 'RK33' at the
 	 * beginning of the executable.	 However, as we want to keep
@@ -39,7 +39,7 @@
 	.word   0
 #endif
 
-#if (defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARM64))
+#if (defined(CONFIG_XPL_BUILD) || defined(CONFIG_ARM64))
 	/* U-Boot proper of armv7 do not need this */
 	b reset
 #endif
@@ -54,7 +54,7 @@
 	ARM_VECTORS
 #endif
 
-#if !defined(CONFIG_TPL_BUILD) && defined(CONFIG_SPL_BUILD) && \
+#if !defined(CONFIG_TPL_BUILD) && defined(CONFIG_XPL_BUILD) && \
 	(CONFIG_ROCKCHIP_SPL_RESERVE_IRAM > 0)
 	.space CONFIG_ROCKCHIP_SPL_RESERVE_IRAM	/* space for the ATF data */
 #endif
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rv1126.h b/arch/arm/include/asm/arch-rockchip/cru_rv1126.h
index 49a1f76..ae273de 100644
--- a/arch/arm/include/asm/arch-rockchip/cru_rv1126.h
+++ b/arch/arm/include/asm/arch-rockchip/cru_rv1126.h
@@ -11,7 +11,7 @@
 #define KHz		1000
 #define OSC_HZ		(24 * MHz)
 
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
 #define APLL_HZ		(1008 * MHz)
 #else
 #define APLL_HZ		(816 * MHz)
@@ -20,7 +20,7 @@
 #define CPLL_HZ		(500 * MHz)
 #define HPLL_HZ		(1400 * MHz)
 #define PCLK_PDPMU_HZ	(100 * MHz)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
 #define ACLK_PDBUS_HZ	(396 * MHz)
 #else
 #define ACLK_PDBUS_HZ	(500 * MHz)
@@ -32,7 +32,7 @@
 #define HCLK_PDCORE_HZ	(200 * MHz)
 #define HCLK_PDAUDIO_HZ	(150 * MHz)
 #define CLK_OSC0_DIV_HZ	(32768)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
 #define ACLK_PDVI_HZ	(297 * MHz)
 #define CLK_ISP_HZ	(297 * MHz)
 #define ACLK_PDISPP_HZ	(297 * MHz)
@@ -324,7 +324,7 @@
 	DCLK_VOP_DIV_SHIFT	= 0,
 	DCLK_VOP_DIV_MASK	= 0xff,
 
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
 	/* CRU_CLK_SEL49_CON */
 	ACLK_PDVI_SEL_SHIFT	= 6,
 	ACLK_PDVI_SEL_MASK	= 0x3 << ACLK_PDVI_SEL_SHIFT,
@@ -397,7 +397,7 @@
 	CLK_GMAC_SRC_DIV_SHIFT	= 0,
 	CLK_GMAC_SRC_DIV_MASK	= 0x1f << CLK_GMAC_SRC_DIV_SHIFT,
 
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT)
 	/* CRU_CLK_SEL68_CON */
 	ACLK_PDISPP_SEL_SHIFT	= 6,
 	ACLK_PDISPP_SEL_MASK	= 0x3 << ACLK_PDISPP_SEL_SHIFT,
diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h b/arch/arm/include/asm/arch-sunxi/boot0.h
index cad25c5..6b2bb5a 100644
--- a/arch/arm/include/asm/arch-sunxi/boot0.h
+++ b/arch/arm/include/asm/arch-sunxi/boot0.h
@@ -5,7 +5,7 @@
 
 #include <asm/arch/cpu.h>
 
-#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) && !defined(CONFIG_XPL_BUILD)
 /* reserve space for BOOT0 header information */
 	b	reset
 	.space	1532
@@ -49,7 +49,7 @@
 	.word	CONFIG_SUNXI_RVBAR_ADDRESS	// writable RVBAR mapping addr
 	.word	SUNXI_SRAMC_BASE
 	.word	CONFIG_SUNXI_RVBAR_ALTERNATIVE	// address for die variant
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
 	.word	CONFIG_SPL_TEXT_BASE
 #else
 	.word   CONFIG_TEXT_BASE
diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h
index 0646022..92c7721 100644
--- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
+++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
@@ -23,7 +23,7 @@
 void return_to_fel(uint32_t lr, uint32_t sp);
 
 /* Board / SoC level designware gmac init */
-#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUN7I_GMAC
+#if !defined CONFIG_XPL_BUILD && defined CONFIG_SUN7I_GMAC
 void eth_init_board(void);
 #else
 static inline void eth_init_board(void) {}
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index 15627c9..382a6d4 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -8,8 +8,8 @@
 #define __FSL_SECURE_BOOT_H
 
 #ifdef CONFIG_CHAIN_OF_TRUST
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
 
-#endif /* #ifndef CONFIG_SPL_BUILD */
+#endif /* #ifndef CONFIG_XPL_BUILD */
 #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
 #endif
diff --git a/arch/arm/include/asm/ti-common/sys_proto.h b/arch/arm/include/asm/ti-common/sys_proto.h
index a96a838..514086a 100644
--- a/arch/arm/include/asm/ti-common/sys_proto.h
+++ b/arch/arm/include/asm/ti-common/sys_proto.h
@@ -57,7 +57,7 @@
  */
 static inline u32 omap_hw_init_context(void)
 {
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
 	return OMAP_INIT_CONTEXT_SPL;
 #else
 	if (uboot_loaded_by_spl())